diff options
author | Benjamin Herrenschmidt <benh@kernel.crashing.org> | 2010-02-26 14:41:00 +1100 |
---|---|---|
committer | Benjamin Herrenschmidt <benh@kernel.crashing.org> | 2010-02-26 14:41:00 +1100 |
commit | 874f2f997dbe041a6c6e509dae8656ed9022d65d (patch) | |
tree | 61898165882041ef7f9beaf2ef6663a1a4d3c29a | |
parent | 071c06cb570d38efe23a124e885f2f3e643a9206 (diff) | |
parent | 6ebdc661b608671e9ca572af8bb42d58108cc008 (diff) | |
download | kernel_samsung_smdk4412-874f2f997dbe041a6c6e509dae8656ed9022d65d.zip kernel_samsung_smdk4412-874f2f997dbe041a6c6e509dae8656ed9022d65d.tar.gz kernel_samsung_smdk4412-874f2f997dbe041a6c6e509dae8656ed9022d65d.tar.bz2 |
Merge commit 'origin/master' into next
Manual merge of:
drivers/char/hvc_console.c
drivers/char/hvc_console.h
286 files changed, 8615 insertions, 3361 deletions
diff --git a/Documentation/dontdiff b/Documentation/dontdiff index 3ad6ace..d9bcffd 100644 --- a/Documentation/dontdiff +++ b/Documentation/dontdiff @@ -69,7 +69,6 @@ av_permissions.h bbootsect bin2c binkernel.spec -binoffset bootsect bounds.h bsetup diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 736d456..e7848a0 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -199,6 +199,10 @@ and is between 256 and 4096 characters. It is defined in the file acpi_display_output=video See above. + acpi_early_pdc_eval [HW,ACPI] Evaluate processor _PDC methods + early. Needed on some platforms to properly + initialize the EC. + acpi_irq_balance [HW,ACPI] ACPI will balance active IRQs default in APIC mode @@ -311,6 +315,11 @@ and is between 256 and 4096 characters. It is defined in the file aic79xx= [HW,SCSI] See Documentation/scsi/aic79xx.txt. + alignment= [KNL,ARM] + Allow the default userspace alignment fault handler + behaviour to be specified. Bit 0 enables warnings, + bit 1 enables fixups, and bit 2 sends a segfault. + amd_iommu= [HW,X86-84] Pass parameters to the AMD IOMMU driver in the system. Possible values are: diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c index 4220851..3119f5d 100644 --- a/Documentation/lguest/lguest.c +++ b/Documentation/lguest/lguest.c @@ -34,7 +34,6 @@ #include <sys/uio.h> #include <termios.h> #include <getopt.h> -#include <zlib.h> #include <assert.h> #include <sched.h> #include <limits.h> diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 006b39d..e87f3cd 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -1074,10 +1074,10 @@ regen_max_retry - INTEGER Default: 5 max_addresses - INTEGER - Number of maximum addresses per interface. 0 disables limitation. - It is recommended not set too large value (or 0) because it would - be too easy way to crash kernel to allow to create too much of - autoconfigured addresses. + Maximum number of autoconfigured addresses per interface. Setting + to zero disables the limitation. It is not recommended to set this + value too large (or to zero) because it would be an easy way to + crash the kernel by allowing too many addresses to be created. Default: 16 disable_ipv6 - BOOLEAN diff --git a/MAINTAINERS b/MAINTAINERS index 412eff6..317ed38 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -616,10 +616,10 @@ M: Richard Purdie <rpurdie@rpsys.net> S: Maintained ARM/CORTINA SYSTEMS GEMINI ARM ARCHITECTURE -M: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> +M: Paulius Zaleckas <paulius.zaleckas@gmail.com> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) T: git git://gitorious.org/linux-gemini/mainline.git -S: Maintained +S: Odd Fixes F: arch/arm/mach-gemini/ ARM/EBSA110 MACHINE SUPPORT @@ -641,9 +641,9 @@ T: topgit git://git.openezx.org/openezx.git F: arch/arm/mach-pxa/ezx.c ARM/FARADAY FA526 PORT -M: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> +M: Paulius Zaleckas <paulius.zaleckas@gmail.com> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -S: Maintained +S: Odd Fixes F: arch/arm/mm/*-fa* ARM/FOOTBRIDGE ARCHITECTURE @@ -1733,10 +1733,9 @@ F: include/linux/tfrc.h F: net/dccp/ DECnet NETWORK LAYER -M: Christine Caulfield <christine.caulfield@googlemail.com> W: http://linux-decnet.sourceforge.net L: linux-decnet-user@lists.sourceforge.net -S: Maintained +S: Orphan F: Documentation/networking/decnet.txt F: net/decnet/ @@ -2394,6 +2393,12 @@ L: linuxppc-dev@ozlabs.org S: Odd Fixes F: drivers/char/hvc_* +VIRTIO CONSOLE DRIVER +M: Amit Shah <amit.shah@redhat.com> +L: virtualization@lists.linux-foundation.org +S: Maintained +F: drivers/char/virtio_console.c + GSPCA FINEPIX SUBDRIVER M: Frank Zago <frank@zago.net> L: linux-media@vger.kernel.org @@ -3490,9 +3495,9 @@ S: Maintained F: drivers/net/wireless/libertas/ MARVELL MV643XX ETHERNET DRIVER -M: Lennert Buytenhek <buytenh@marvell.com> +M: Lennert Buytenhek <buytenh@wantstofly.org> L: netdev@vger.kernel.org -S: Supported +S: Maintained F: drivers/net/mv643xx_eth.* F: include/linux/mv643xx.h @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 33 -EXTRAVERSION = -rc8 +EXTRAVERSION = NAME = Man-Eating Seals of Antiquity # *DOCUMENTATION* diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index c77d2fa..8113bb5 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -42,7 +42,8 @@ #endif #if defined(CONFIG_CPU_ARM920T) || defined(CONFIG_CPU_ARM922T) || \ - defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020) + defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020) || \ + defined(CONFIG_CPU_ARM1026) # define MULTI_CACHE 1 #endif diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index c6c57b6..621acad 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -102,6 +102,7 @@ struct cpu_cache_fns cpu_cache; #endif #ifdef CONFIG_OUTER_CACHE struct outer_cache_fns outer_cache; +EXPORT_SYMBOL(outer_cache); #endif struct stack { diff --git a/arch/arm/mach-gemini/gpio.c b/arch/arm/mach-gemini/gpio.c index e726385..fe3bd5a 100644 --- a/arch/arm/mach-gemini/gpio.c +++ b/arch/arm/mach-gemini/gpio.c @@ -86,7 +86,7 @@ static int gpio_set_irq_type(unsigned int irq, unsigned int type) unsigned int reg_both, reg_level, reg_type; reg_type = __raw_readl(base + GPIO_INT_TYPE); - reg_level = __raw_readl(base + GPIO_INT_BOTH_EDGE); + reg_level = __raw_readl(base + GPIO_INT_LEVEL); reg_both = __raw_readl(base + GPIO_INT_BOTH_EDGE); switch (type) { @@ -117,7 +117,7 @@ static int gpio_set_irq_type(unsigned int irq, unsigned int type) } __raw_writel(reg_type, base + GPIO_INT_TYPE); - __raw_writel(reg_level, base + GPIO_INT_BOTH_EDGE); + __raw_writel(reg_level, base + GPIO_INT_LEVEL); __raw_writel(reg_both, base + GPIO_INT_BOTH_EDGE); gpio_ack_irq(irq); diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 5fedc50..5fef73f 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -961,16 +961,14 @@ static void __init omap_mux_init_list(struct omap_mux *superset) while (superset->reg_offset != OMAP_MUX_TERMINATOR) { struct omap_mux *entry; -#ifndef CONFIG_OMAP_MUX - /* Skip pins that are not muxed as GPIO by bootloader */ - if (!OMAP_MODE_GPIO(omap_mux_read(superset->reg_offset))) { +#ifdef CONFIG_OMAP_MUX + if (!superset->muxnames || !superset->muxnames[0]) { superset++; continue; } -#endif - -#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) - if (!superset->muxnames || !superset->muxnames[0]) { +#else + /* Skip pins that are not muxed as GPIO by bootloader */ + if (!OMAP_MODE_GPIO(omap_mux_read(superset->reg_offset))) { superset++; continue; } diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index b270d62..62820ed 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -11,6 +11,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <linux/moduleparam.h> #include <linux/compiler.h> #include <linux/kernel.h> #include <linux/errno.h> @@ -77,6 +78,8 @@ static unsigned long ai_dword; static unsigned long ai_multi; static int ai_usermode; +core_param(alignment, ai_usermode, int, 0600); + #define UM_WARN (1 << 0) #define UM_FIXUP (1 << 1) #define UM_SIGNAL (1 << 2) diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 5a79fc6..31c2f4c 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Thu Jan 28 22:15:54 2010 +# Last update: Sat Feb 20 14:16:15 2010 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -2257,7 +2257,7 @@ oratisalog MACH_ORATISALOG ORATISALOG 2268 oratismadi MACH_ORATISMADI ORATISMADI 2269 oratisot16 MACH_ORATISOT16 ORATISOT16 2270 oratisdesk MACH_ORATISDESK ORATISDESK 2271 -v2_ca9 MACH_V2P_CA9 V2P_CA9 2272 +vexpress MACH_VEXPRESS VEXPRESS 2272 sintexo MACH_SINTEXO SINTEXO 2273 cm3389 MACH_CM3389 CM3389 2274 omap3_cio MACH_OMAP3_CIO OMAP3_CIO 2275 @@ -2636,3 +2636,45 @@ hw90240 MACH_HW90240 HW90240 2648 dm365_leopard MACH_DM365_LEOPARD DM365_LEOPARD 2649 mityomapl138 MACH_MITYOMAPL138 MITYOMAPL138 2650 scat110 MACH_SCAT110 SCAT110 2651 +acer_a1 MACH_ACER_A1 ACER_A1 2652 +cmcontrol MACH_CMCONTROL CMCONTROL 2653 +pelco_lamar MACH_PELCO_LAMAR PELCO_LAMAR 2654 +rfp43 MACH_RFP43 RFP43 2655 +sk86r0301 MACH_SK86R0301 SK86R0301 2656 +ctpxa MACH_CTPXA CTPXA 2657 +epb_arm9_a MACH_EPB_ARM9_A EPB_ARM9_A 2658 +guruplug MACH_GURUPLUG GURUPLUG 2659 +spear310 MACH_SPEAR310 SPEAR310 2660 +spear320 MACH_SPEAR320 SPEAR320 2661 +robotx MACH_ROBOTX ROBOTX 2662 +lsxhl MACH_LSXHL LSXHL 2663 +smartlite MACH_SMARTLITE SMARTLITE 2664 +cws2 MACH_CWS2 CWS2 2665 +m619 MACH_M619 M619 2666 +smartview MACH_SMARTVIEW SMARTVIEW 2667 +lsa_salsa MACH_LSA_SALSA LSA_SALSA 2668 +kizbox MACH_KIZBOX KIZBOX 2669 +htccharmer MACH_HTCCHARMER HTCCHARMER 2670 +guf_neso_lt MACH_GUF_NESO_LT GUF_NESO_LT 2671 +pm9g45 MACH_PM9G45 PM9G45 2672 +htcpanther MACH_HTCPANTHER HTCPANTHER 2673 +htcpanther_cdma MACH_HTCPANTHER_CDMA HTCPANTHER_CDMA 2674 +reb01 MACH_REB01 REB01 2675 +aquila MACH_AQUILA AQUILA 2676 +spark_sls_hw2 MACH_SPARK_SLS_HW2 SPARK_SLS_HW2 2677 +sheeva_esata MACH_ESATA_SHEEVAPLUG ESATA_SHEEVAPLUG 2678 +surf7x30 MACH_SURF7X30 SURF7X30 2679 +micro2440 MACH_MICRO2440 MICRO2440 2680 +am2440 MACH_AM2440 AM2440 2681 +tq2440 MACH_TQ2440 TQ2440 2682 +lpc2478oem MACH_LPC2478OEM LPC2478OEM 2683 +ak880x MACH_AK880X AK880X 2684 +cobra3530 MACH_COBRA3530 COBRA3530 2685 +pmppb MACH_PMPPB PMPPB 2686 +u6715 MACH_U6715 U6715 2687 +axar1500_sender MACH_AXAR1500_SENDER AXAR1500_SENDER 2688 +g30_dvb MACH_G30_DVB G30_DVB 2689 +vc088x MACH_VC088X VC088X 2690 +mioa702 MACH_MIOA702 MIOA702 2691 +hpmin MACH_HPMIN HPMIN 2692 +ak880xak MACH_AK880XAK AK880XAK 2693 diff --git a/arch/ia64/include/asm/acpi.h b/arch/ia64/include/asm/acpi.h index 7ae5889..e97b255 100644 --- a/arch/ia64/include/asm/acpi.h +++ b/arch/ia64/include/asm/acpi.h @@ -94,6 +94,7 @@ ia64_acpi_release_global_lock (unsigned int *lock) #define acpi_noirq 0 /* ACPI always enabled on IA64 */ #define acpi_pci_disabled 0 /* ACPI PCI always enabled on IA64 */ #define acpi_strict 1 /* no ACPI spec workarounds on IA64 */ +#define acpi_ht 0 /* no HT-only mode on IA64 */ #endif #define acpi_processor_cstate_check(x) (x) /* no idle limits on IA64 :) */ static inline void disable_acpi(void) { } diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c index ece1bf9..e456f06 100644 --- a/arch/ia64/sn/kernel/setup.c +++ b/arch/ia64/sn/kernel/setup.c @@ -71,7 +71,7 @@ EXPORT_SYMBOL(sn_rtc_cycles_per_second); DEFINE_PER_CPU(struct sn_hub_info_s, __sn_hub_info); EXPORT_PER_CPU_SYMBOL(__sn_hub_info); -DEFINE_PER_CPU(short [MAX_COMPACT_NODES], __sn_cnodeid_to_nasid); +DEFINE_PER_CPU(short, __sn_cnodeid_to_nasid[MAX_COMPACT_NODES]); EXPORT_PER_CPU_SYMBOL(__sn_cnodeid_to_nasid); DEFINE_PER_CPU(struct nodepda_s *, __sn_nodepda); diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index cd5837e..b008168 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -130,6 +130,7 @@ config CMDLINE_FORCE config OF def_bool y + select OF_FLATTREE config PROC_DEVICETREE bool "Support for device tree in /proc" diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h index fc9997b..267c7c7 100644 --- a/arch/microblaze/include/asm/io.h +++ b/arch/microblaze/include/asm/io.h @@ -217,7 +217,7 @@ static inline void __iomem *__ioremap(phys_addr_t address, unsigned long size, * Little endian */ -#define out_le32(a, v) __raw_writel(__cpu_to_le32(v), (a)); +#define out_le32(a, v) __raw_writel(__cpu_to_le32(v), (a)) #define out_le16(a, v) __raw_writew(__cpu_to_le16(v), (a)) #define in_le32(a) __le32_to_cpu(__raw_readl(a)) diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h index ef3ec1d..03f45a9 100644 --- a/arch/microblaze/include/asm/prom.h +++ b/arch/microblaze/include/asm/prom.h @@ -26,31 +26,11 @@ #include <asm/irq.h> #include <asm/atomic.h> -#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT 1 -#define OF_ROOT_NODE_SIZE_CELLS_DEFAULT 1 - -#define of_compat_cmp(s1, s2, l) strncasecmp((s1), (s2), (l)) -#define of_prop_cmp(s1, s2) strcmp((s1), (s2)) -#define of_node_cmp(s1, s2) strcasecmp((s1), (s2)) - -extern struct device_node *of_chosen; - #define HAVE_ARCH_DEVTREE_FIXUPS -extern struct device_node *allnodes; /* temporary while merging */ -extern rwlock_t devtree_lock; /* temporary while merging */ - -/* For updating the device tree at runtime */ -extern void of_attach_node(struct device_node *); -extern void of_detach_node(struct device_node *); - /* Other Prototypes */ extern int early_uartlite_console(void); -extern struct resource *request_OF_resource(struct device_node *node, - int index, const char *name_postfix); -extern int release_OF_resource(struct device_node *node, int index); - /* * OF address retreival & translation */ diff --git a/arch/microblaze/kernel/cpu/cache.c b/arch/microblaze/kernel/cpu/cache.c index d9d6383..2a56bcc 100644 --- a/arch/microblaze/kernel/cpu/cache.c +++ b/arch/microblaze/kernel/cpu/cache.c @@ -172,16 +172,15 @@ do { \ /* It is used only first parameter for OP - for wic, wdc */ #define CACHE_RANGE_LOOP_1(start, end, line_length, op) \ do { \ - int step = -line_length; \ - int count = end - start; \ - BUG_ON(count <= 0); \ + int volatile temp; \ + BUG_ON(end - start <= 0); \ \ - __asm__ __volatile__ (" 1: addk %0, %0, %1; \ - " #op " %0, r0; \ - bgtid %1, 1b; \ - addk %1, %1, %2; \ - " : : "r" (start), "r" (count), \ - "r" (step) : "memory"); \ + __asm__ __volatile__ (" 1: " #op " %1, r0; \ + cmpu %0, %1, %2; \ + bgtid %0, 1b; \ + addk %1, %1, %3; \ + " : : "r" (temp), "r" (start), "r" (end),\ + "r" (line_length) : "memory"); \ } while (0); static void __flush_icache_range_msr_irq(unsigned long start, unsigned long end) @@ -313,16 +312,6 @@ static void __invalidate_dcache_all_wb(void) pr_debug("%s\n", __func__); CACHE_ALL_LOOP2(cpuinfo.dcache_size, cpuinfo.dcache_line_length, wdc.clear) - -#if 0 - unsigned int i; - - pr_debug("%s\n", __func__); - - /* Just loop through cache size and invalidate it */ - for (i = 0; i < cpuinfo.dcache_size; i += cpuinfo.dcache_line_length) - __invalidate_dcache(0, i); -#endif } static void __invalidate_dcache_range_wb(unsigned long start, diff --git a/arch/microblaze/kernel/of_platform.c b/arch/microblaze/kernel/of_platform.c index acf4574..1c6d684 100644 --- a/arch/microblaze/kernel/of_platform.c +++ b/arch/microblaze/kernel/of_platform.c @@ -185,7 +185,7 @@ EXPORT_SYMBOL(of_find_device_by_node); static int of_dev_phandle_match(struct device *dev, void *data) { phandle *ph = data; - return to_of_device(dev)->node->linux_phandle == *ph; + return to_of_device(dev)->node->phandle == *ph; } struct of_device *of_find_device_by_phandle(phandle ph) diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c index b817df1..a15ef6d 100644 --- a/arch/microblaze/kernel/prom.c +++ b/arch/microblaze/kernel/prom.c @@ -42,698 +42,21 @@ #include <asm/sections.h> #include <asm/pci-bridge.h> -static int __initdata dt_root_addr_cells; -static int __initdata dt_root_size_cells; - -typedef u32 cell_t; - -static struct boot_param_header *initial_boot_params; - -/* export that to outside world */ -struct device_node *of_chosen; - -static inline char *find_flat_dt_string(u32 offset) -{ - return ((char *)initial_boot_params) + - initial_boot_params->off_dt_strings + offset; -} - -/** - * This function is used to scan the flattened device-tree, it is - * used to extract the memory informations at boot before we can - * unflatten the tree - */ -int __init of_scan_flat_dt(int (*it)(unsigned long node, - const char *uname, int depth, - void *data), - void *data) -{ - unsigned long p = ((unsigned long)initial_boot_params) + - initial_boot_params->off_dt_struct; - int rc = 0; - int depth = -1; - - do { - u32 tag = *((u32 *)p); - char *pathp; - - p += 4; - if (tag == OF_DT_END_NODE) { - depth--; - continue; - } - if (tag == OF_DT_NOP) - continue; - if (tag == OF_DT_END) - break; - if (tag == OF_DT_PROP) { - u32 sz = *((u32 *)p); - p += 8; - if (initial_boot_params->version < 0x10) - p = _ALIGN(p, sz >= 8 ? 8 : 4); - p += sz; - p = _ALIGN(p, 4); - continue; - } - if (tag != OF_DT_BEGIN_NODE) { - printk(KERN_WARNING "Invalid tag %x scanning flattened" - " device tree !\n", tag); - return -EINVAL; - } - depth++; - pathp = (char *)p; - p = _ALIGN(p + strlen(pathp) + 1, 4); - if ((*pathp) == '/') { - char *lp, *np; - for (lp = NULL, np = pathp; *np; np++) - if ((*np) == '/') - lp = np+1; - if (lp != NULL) - pathp = lp; - } - rc = it(p, pathp, depth, data); - if (rc != 0) - break; - } while (1); - - return rc; -} - -unsigned long __init of_get_flat_dt_root(void) -{ - unsigned long p = ((unsigned long)initial_boot_params) + - initial_boot_params->off_dt_struct; - - while (*((u32 *)p) == OF_DT_NOP) - p += 4; - BUG_ON(*((u32 *)p) != OF_DT_BEGIN_NODE); - p += 4; - return _ALIGN(p + strlen((char *)p) + 1, 4); -} - -/** - * This function can be used within scan_flattened_dt callback to get - * access to properties - */ -void *__init of_get_flat_dt_prop(unsigned long node, const char *name, - unsigned long *size) -{ - unsigned long p = node; - - do { - u32 tag = *((u32 *)p); - u32 sz, noff; - const char *nstr; - - p += 4; - if (tag == OF_DT_NOP) - continue; - if (tag != OF_DT_PROP) - return NULL; - - sz = *((u32 *)p); - noff = *((u32 *)(p + 4)); - p += 8; - if (initial_boot_params->version < 0x10) - p = _ALIGN(p, sz >= 8 ? 8 : 4); - - nstr = find_flat_dt_string(noff); - if (nstr == NULL) { - printk(KERN_WARNING "Can't find property index" - " name !\n"); - return NULL; - } - if (strcmp(name, nstr) == 0) { - if (size) - *size = sz; - return (void *)p; - } - p += sz; - p = _ALIGN(p, 4); - } while (1); -} - -int __init of_flat_dt_is_compatible(unsigned long node, const char *compat) -{ - const char *cp; - unsigned long cplen, l; - - cp = of_get_flat_dt_prop(node, "compatible", &cplen); - if (cp == NULL) - return 0; - while (cplen > 0) { - if (strncasecmp(cp, compat, strlen(compat)) == 0) - return 1; - l = strlen(cp) + 1; - cp += l; - cplen -= l; - } - - return 0; -} - -static void *__init unflatten_dt_alloc(unsigned long *mem, unsigned long size, - unsigned long align) -{ - void *res; - - *mem = _ALIGN(*mem, align); - res = (void *)*mem; - *mem += size; - - return res; -} - -static unsigned long __init unflatten_dt_node(unsigned long mem, - unsigned long *p, - struct device_node *dad, - struct device_node ***allnextpp, - unsigned long fpsize) -{ - struct device_node *np; - struct property *pp, **prev_pp = NULL; - char *pathp; - u32 tag; - unsigned int l, allocl; - int has_name = 0; - int new_format = 0; - - tag = *((u32 *)(*p)); - if (tag != OF_DT_BEGIN_NODE) { - printk("Weird tag at start of node: %x\n", tag); - return mem; - } - *p += 4; - pathp = (char *)*p; - l = allocl = strlen(pathp) + 1; - *p = _ALIGN(*p + l, 4); - - /* version 0x10 has a more compact unit name here instead of the full - * path. we accumulate the full path size using "fpsize", we'll rebuild - * it later. We detect this because the first character of the name is - * not '/'. - */ - if ((*pathp) != '/') { - new_format = 1; - if (fpsize == 0) { - /* root node: special case. fpsize accounts for path - * plus terminating zero. root node only has '/', so - * fpsize should be 2, but we want to avoid the first - * level nodes to have two '/' so we use fpsize 1 here - */ - fpsize = 1; - allocl = 2; - } else { - /* account for '/' and path size minus terminal 0 - * already in 'l' - */ - fpsize += l; - allocl = fpsize; - } - } - - np = unflatten_dt_alloc(&mem, sizeof(struct device_node) + allocl, - __alignof__(struct device_node)); - if (allnextpp) { - memset(np, 0, sizeof(*np)); - np->full_name = ((char *)np) + sizeof(struct device_node); - if (new_format) { - char *p2 = np->full_name; - /* rebuild full path for new format */ - if (dad && dad->parent) { - strcpy(p2, dad->full_name); -#ifdef DEBUG - if ((strlen(p2) + l + 1) != allocl) { - pr_debug("%s: p: %d, l: %d, a: %d\n", - pathp, (int)strlen(p2), - l, allocl); - } -#endif - p2 += strlen(p2); - } - *(p2++) = '/'; - memcpy(p2, pathp, l); - } else - memcpy(np->full_name, pathp, l); - prev_pp = &np->properties; - **allnextpp = np; - *allnextpp = &np->allnext; - if (dad != NULL) { - np->parent = dad; - /* we temporarily use the next field as `last_child'*/ - if (dad->next == NULL) - dad->child = np; - else - dad->next->sibling = np; - dad->next = np; - } - kref_init(&np->kref); - } - while (1) { - u32 sz, noff; - char *pname; - - tag = *((u32 *)(*p)); - if (tag == OF_DT_NOP) { - *p += 4; - continue; - } - if (tag != OF_DT_PROP) - break; - *p += 4; - sz = *((u32 *)(*p)); - noff = *((u32 *)((*p) + 4)); - *p += 8; - if (initial_boot_params->version < 0x10) - *p = _ALIGN(*p, sz >= 8 ? 8 : 4); - - pname = find_flat_dt_string(noff); - if (pname == NULL) { - printk(KERN_INFO - "Can't find property name in list !\n"); - break; - } - if (strcmp(pname, "name") == 0) - has_name = 1; - l = strlen(pname) + 1; - pp = unflatten_dt_alloc(&mem, sizeof(struct property), - __alignof__(struct property)); - if (allnextpp) { - if (strcmp(pname, "linux,phandle") == 0) { - np->node = *((u32 *)*p); - if (np->linux_phandle == 0) - np->linux_phandle = np->node; - } - if (strcmp(pname, "ibm,phandle") == 0) - np->linux_phandle = *((u32 *)*p); - pp->name = pname; - pp->length = sz; - pp->value = (void *)*p; - *prev_pp = pp; - prev_pp = &pp->next; - } - *p = _ALIGN((*p) + sz, 4); - } - /* with version 0x10 we may not have the name property, recreate - * it here from the unit name if absent - */ - if (!has_name) { - char *p1 = pathp, *ps = pathp, *pa = NULL; - int sz; - - while (*p1) { - if ((*p1) == '@') - pa = p1; - if ((*p1) == '/') - ps = p1 + 1; - p1++; - } - if (pa < ps) - pa = p1; - sz = (pa - ps) + 1; - pp = unflatten_dt_alloc(&mem, sizeof(struct property) + sz, - __alignof__(struct property)); - if (allnextpp) { - pp->name = "name"; - pp->length = sz; - pp->value = pp + 1; - *prev_pp = pp; - prev_pp = &pp->next; - memcpy(pp->value, ps, sz - 1); - ((char *)pp->value)[sz - 1] = 0; - pr_debug("fixed up name for %s -> %s\n", pathp, - (char *)pp->value); - } - } - if (allnextpp) { - *prev_pp = NULL; - np->name = of_get_property(np, "name", NULL); - np->type = of_get_property(np, "device_type", NULL); - - if (!np->name) - np->name = "<NULL>"; - if (!np->type) - np->type = "<NULL>"; - } - while (tag == OF_DT_BEGIN_NODE) { - mem = unflatten_dt_node(mem, p, np, allnextpp, fpsize); - tag = *((u32 *)(*p)); - } - if (tag != OF_DT_END_NODE) { - printk(KERN_INFO "Weird tag at end of node: %x\n", tag); - return mem; - } - *p += 4; - return mem; -} - -/** - * unflattens the device-tree passed by the firmware, creating the - * tree of struct device_node. It also fills the "name" and "type" - * pointers of the nodes so the normal device-tree walking functions - * can be used (this used to be done by finish_device_tree) - */ -void __init unflatten_device_tree(void) -{ - unsigned long start, mem, size; - struct device_node **allnextp = &allnodes; - - pr_debug(" -> unflatten_device_tree()\n"); - - /* First pass, scan for size */ - start = ((unsigned long)initial_boot_params) + - initial_boot_params->off_dt_struct; - size = unflatten_dt_node(0, &start, NULL, NULL, 0); - size = (size | 3) + 1; - - pr_debug(" size is %lx, allocating...\n", size); - - /* Allocate memory for the expanded device tree */ - mem = lmb_alloc(size + 4, __alignof__(struct device_node)); - mem = (unsigned long) __va(mem); - - ((u32 *)mem)[size / 4] = 0xdeadbeef; - - pr_debug(" unflattening %lx...\n", mem); - - /* Second pass, do actual unflattening */ - start = ((unsigned long)initial_boot_params) + - initial_boot_params->off_dt_struct; - unflatten_dt_node(mem, &start, NULL, &allnextp, 0); - if (*((u32 *)start) != OF_DT_END) - printk(KERN_WARNING "Weird tag at end of tree: %08x\n", - *((u32 *)start)); - if (((u32 *)mem)[size / 4] != 0xdeadbeef) - printk(KERN_WARNING "End of tree marker overwritten: %08x\n", - ((u32 *)mem)[size / 4]); - *allnextp = NULL; - - /* Get pointer to OF "/chosen" node for use everywhere */ - of_chosen = of_find_node_by_path("/chosen"); - if (of_chosen == NULL) - of_chosen = of_find_node_by_path("/chosen@0"); - - pr_debug(" <- unflatten_device_tree()\n"); -} - -#define early_init_dt_scan_drconf_memory(node) 0 - -static int __init early_init_dt_scan_cpus(unsigned long node, - const char *uname, int depth, - void *data) -{ - static int logical_cpuid; - char *type = of_get_flat_dt_prop(node, "device_type", NULL); - const u32 *intserv; - int i, nthreads; - int found = 0; - - /* We are scanning "cpu" nodes only */ - if (type == NULL || strcmp(type, "cpu") != 0) - return 0; - - /* Get physical cpuid */ - intserv = of_get_flat_dt_prop(node, "reg", NULL); - nthreads = 1; - - /* - * Now see if any of these threads match our boot cpu. - * NOTE: This must match the parsing done in smp_setup_cpu_maps. - */ - for (i = 0; i < nthreads; i++) { - /* - * version 2 of the kexec param format adds the phys cpuid of - * booted proc. - */ - if (initial_boot_params && initial_boot_params->version >= 2) { - if (intserv[i] == - initial_boot_params->boot_cpuid_phys) { - found = 1; - break; - } - } else { - /* - * Check if it's the boot-cpu, set it's hw index now, - * unfortunately this format did not support booting - * off secondary threads. - */ - if (of_get_flat_dt_prop(node, - "linux,boot-cpu", NULL) != NULL) { - found = 1; - break; - } - } - -#ifdef CONFIG_SMP - /* logical cpu id is always 0 on UP kernels */ - logical_cpuid++; -#endif - } - - if (found) { - pr_debug("boot cpu: logical %d physical %d\n", logical_cpuid, - intserv[i]); - boot_cpuid = logical_cpuid; - } - - return 0; -} - -#ifdef CONFIG_BLK_DEV_INITRD -static void __init early_init_dt_check_for_initrd(unsigned long node) -{ - unsigned long l; - u32 *prop; - - pr_debug("Looking for initrd properties... "); - - prop = of_get_flat_dt_prop(node, "linux,initrd-start", &l); - if (prop) { - initrd_start = (unsigned long) - __va((u32)of_read_ulong(prop, l/4)); - - prop = of_get_flat_dt_prop(node, "linux,initrd-end", &l); - if (prop) { - initrd_end = (unsigned long) - __va((u32)of_read_ulong(prop, 1/4)); - initrd_below_start_ok = 1; - } else { - initrd_start = 0; - } - } - - pr_debug("initrd_start=0x%lx initrd_end=0x%lx\n", - initrd_start, initrd_end); -} -#else -static inline void early_init_dt_check_for_initrd(unsigned long node) -{ -} -#endif /* CONFIG_BLK_DEV_INITRD */ - -static int __init early_init_dt_scan_chosen(unsigned long node, - const char *uname, int depth, void *data) -{ - unsigned long l; - char *p; - - pr_debug("search \"chosen\", depth: %d, uname: %s\n", depth, uname); - - if (depth != 1 || - (strcmp(uname, "chosen") != 0 && - strcmp(uname, "chosen@0") != 0)) - return 0; - -#ifdef CONFIG_KEXEC - lprop = (u64 *)of_get_flat_dt_prop(node, - "linux,crashkernel-base", NULL); - if (lprop) - crashk_res.start = *lprop; - - lprop = (u64 *)of_get_flat_dt_prop(node, - "linux,crashkernel-size", NULL); - if (lprop) - crashk_res.end = crashk_res.start + *lprop - 1; -#endif - - early_init_dt_check_for_initrd(node); - - /* Retreive command line */ - p = of_get_flat_dt_prop(node, "bootargs", &l); - if (p != NULL && l > 0) - strlcpy(cmd_line, p, min((int)l, COMMAND_LINE_SIZE)); - -#ifdef CONFIG_CMDLINE -#ifndef CONFIG_CMDLINE_FORCE - if (p == NULL || l == 0 || (l == 1 && (*p) == 0)) -#endif - strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE); -#endif /* CONFIG_CMDLINE */ - - pr_debug("Command line is: %s\n", cmd_line); - - /* break now */ - return 1; -} - -static int __init early_init_dt_scan_root(unsigned long node, - const char *uname, int depth, void *data) -{ - u32 *prop; - - if (depth != 0) - return 0; - - prop = of_get_flat_dt_prop(node, "#size-cells", NULL); - dt_root_size_cells = (prop == NULL) ? 1 : *prop; - pr_debug("dt_root_size_cells = %x\n", dt_root_size_cells); - - prop = of_get_flat_dt_prop(node, "#address-cells", NULL); - dt_root_addr_cells = (prop == NULL) ? 2 : *prop; - pr_debug("dt_root_addr_cells = %x\n", dt_root_addr_cells); - - /* break now */ - return 1; -} - -static u64 __init dt_mem_next_cell(int s, cell_t **cellp) +void __init early_init_dt_scan_chosen_arch(unsigned long node) { - cell_t *p = *cellp; - - *cellp = p + s; - return of_read_number(p, s); + /* No Microblaze specific code here */ } -static int __init early_init_dt_scan_memory(unsigned long node, - const char *uname, int depth, void *data) +void __init early_init_dt_add_memory_arch(u64 base, u64 size) { - char *type = of_get_flat_dt_prop(node, "device_type", NULL); - cell_t *reg, *endp; - unsigned long l; - - /* Look for the ibm,dynamic-reconfiguration-memory node */ -/* if (depth == 1 && - strcmp(uname, "ibm,dynamic-reconfiguration-memory") == 0) - return early_init_dt_scan_drconf_memory(node); -*/ - /* We are scanning "memory" nodes only */ - if (type == NULL) { - /* - * The longtrail doesn't have a device_type on the - * /memory node, so look for the node called /memory@0. - */ - if (depth != 1 || strcmp(uname, "memory@0") != 0) - return 0; - } else if (strcmp(type, "memory") != 0) - return 0; - - reg = (cell_t *)of_get_flat_dt_prop(node, "linux,usable-memory", &l); - if (reg == NULL) - reg = (cell_t *)of_get_flat_dt_prop(node, "reg", &l); - if (reg == NULL) - return 0; - - endp = reg + (l / sizeof(cell_t)); - - pr_debug("memory scan node %s, reg size %ld, data: %x %x %x %x,\n", - uname, l, reg[0], reg[1], reg[2], reg[3]); - - while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) { - u64 base, size; - - base = dt_mem_next_cell(dt_root_addr_cells, ®); - size = dt_mem_next_cell(dt_root_size_cells, ®); - - if (size == 0) - continue; - pr_debug(" - %llx , %llx\n", (unsigned long long)base, - (unsigned long long)size); - - lmb_add(base, size); - } - return 0; + lmb_add(base, size); } -#ifdef CONFIG_PHYP_DUMP -/** - * phyp_dump_calculate_reserve_size() - reserve variable boot area 5% or arg - * - * Function to find the largest size we need to reserve - * during early boot process. - * - * It either looks for boot param and returns that OR - * returns larger of 256 or 5% rounded down to multiples of 256MB. - * - */ -static inline unsigned long phyp_dump_calculate_reserve_size(void) +u64 __init early_init_dt_alloc_memory_arch(u64 size, u64 align) { - unsigned long tmp; - - if (phyp_dump_info->reserve_bootvar) - return phyp_dump_info->reserve_bootvar; - - /* divide by 20 to get 5% of value */ - tmp = lmb_end_of_DRAM(); - do_div(tmp, 20); - - /* round it down in multiples of 256 */ - tmp = tmp & ~0x0FFFFFFFUL; - - return (tmp > PHYP_DUMP_RMR_END ? tmp : PHYP_DUMP_RMR_END); + return lmb_alloc(size, align); } -/** - * phyp_dump_reserve_mem() - reserve all not-yet-dumped mmemory - * - * This routine may reserve memory regions in the kernel only - * if the system is supported and a dump was taken in last - * boot instance or if the hardware is supported and the - * scratch area needs to be setup. In other instances it returns - * without reserving anything. The memory in case of dump being - * active is freed when the dump is collected (by userland tools). - */ -static void __init phyp_dump_reserve_mem(void) -{ - unsigned long base, size; - unsigned long variable_reserve_size; - - if (!phyp_dump_info->phyp_dump_configured) { - printk(KERN_ERR "Phyp-dump not supported on this hardware\n"); - return; - } - - if (!phyp_dump_info->phyp_dump_at_boot) { - printk(KERN_INFO "Phyp-dump disabled at boot time\n"); - return; - } - - variable_reserve_size = phyp_dump_calculate_reserve_size(); - - if (phyp_dump_info->phyp_dump_is_active) { - /* Reserve *everything* above RMR.Area freed by userland tools*/ - base = variable_reserve_size; - size = lmb_end_of_DRAM() - base; - - /* XXX crashed_ram_end is wrong, since it may be beyond - * the memory_limit, it will need to be adjusted. */ - lmb_reserve(base, size); - - phyp_dump_info->init_reserve_start = base; - phyp_dump_info->init_reserve_size = size; - } else { - size = phyp_dump_info->cpu_state_size + - phyp_dump_info->hpte_region_size + - variable_reserve_size; - base = lmb_end_of_DRAM() - size; - lmb_reserve(base, size); - phyp_dump_info->init_reserve_start = base; - phyp_dump_info->init_reserve_size = size; - } -} -#else -static inline void __init phyp_dump_reserve_mem(void) {} -#endif /* CONFIG_PHYP_DUMP && CONFIG_PPC_RTAS */ - #ifdef CONFIG_EARLY_PRINTK /* MS this is Microblaze specifig function */ static int __init early_init_dt_scan_serial(unsigned long node, @@ -775,11 +98,6 @@ void __init early_init_devtree(void *params) /* Setup flat device-tree pointer */ initial_boot_params = params; -#ifdef CONFIG_PHYP_DUMP - /* scan tree to see if dump occured during last boot */ - of_scan_flat_dt(early_init_dt_scan_phyp_dump, NULL); -#endif - /* Retrieve various informations from the /chosen node of the * device-tree, including the platform type, initrd location and * size, TCE reserve, and more ... @@ -799,33 +117,18 @@ void __init early_init_devtree(void *params) pr_debug("Phys. mem: %lx\n", (unsigned long) lmb_phys_mem_size()); - pr_debug("Scanning CPUs ...\n"); - - /* Retreive CPU related informations from the flat tree - * (altivec support, boot CPU ID, ...) - */ - of_scan_flat_dt(early_init_dt_scan_cpus, NULL); - pr_debug(" <- early_init_devtree()\n"); } -/** - * Indicates whether the root node has a given value in its - * compatible property. - */ -int machine_is_compatible(const char *compat) +#ifdef CONFIG_BLK_DEV_INITRD +void __init early_init_dt_setup_initrd_arch(unsigned long start, + unsigned long end) { - struct device_node *root; - int rc = 0; - - root = of_find_node_by_path("/"); - if (root) { - rc = of_device_is_compatible(root, compat); - of_node_put(root); - } - return rc; + initrd_start = (unsigned long)__va(start); + initrd_end = (unsigned long)__va(end); + initrd_below_start_ok = 1; } -EXPORT_SYMBOL(machine_is_compatible); +#endif /******* * @@ -838,273 +141,6 @@ EXPORT_SYMBOL(machine_is_compatible); * *******/ -/** - * of_find_node_by_phandle - Find a node given a phandle - * @handle: phandle of the node to find - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_find_node_by_phandle(phandle handle) -{ - struct device_node *np; - - read_lock(&devtree_lock); - for (np = allnodes; np != NULL; np = np->allnext) - if (np->linux_phandle == handle) - break; - of_node_get(np); - read_unlock(&devtree_lock); - return np; -} -EXPORT_SYMBOL(of_find_node_by_phandle); - -/** - * of_node_get - Increment refcount of a node - * @node: Node to inc refcount, NULL is supported to - * simplify writing of callers - * - * Returns node. - */ -struct device_node *of_node_get(struct device_node *node) -{ - if (node) - kref_get(&node->kref); - return node; -} -EXPORT_SYMBOL(of_node_get); - -static inline struct device_node *kref_to_device_node(struct kref *kref) -{ - return container_of(kref, struct device_node, kref); -} - -/** - * of_node_release - release a dynamically allocated node - * @kref: kref element of the node to be released - * - * In of_node_put() this function is passed to kref_put() - * as the destructor. - */ -static void of_node_release(struct kref *kref) -{ - struct device_node *node = kref_to_device_node(kref); - struct property *prop = node->properties; - - /* We should never be releasing nodes that haven't been detached. */ - if (!of_node_check_flag(node, OF_DETACHED)) { - printk(KERN_INFO "WARNING: Bad of_node_put() on %s\n", - node->full_name); - dump_stack(); - kref_init(&node->kref); - return; - } - - if (!of_node_check_flag(node, OF_DYNAMIC)) - return; - - while (prop) { - struct property *next = prop->next; - kfree(prop->name); - kfree(prop->value); - kfree(prop); - prop = next; - - if (!prop) { - prop = node->deadprops; - node->deadprops = NULL; - } - } - kfree(node->full_name); - kfree(node->data); - kfree(node); -} - -/** - * of_node_put - Decrement refcount of a node - * @node: Node to dec refcount, NULL is supported to - * simplify writing of callers - * - */ -void of_node_put(struct device_node *node) -{ - if (node) - kref_put(&node->kref, of_node_release); -} -EXPORT_SYMBOL(of_node_put); - -/* - * Plug a device node into the tree and global list. - */ -void of_attach_node(struct device_node *np) -{ - unsigned long flags; - - write_lock_irqsave(&devtree_lock, flags); - np->sibling = np->parent->child; - np->allnext = allnodes; - np->parent->child = np; - allnodes = np; - write_unlock_irqrestore(&devtree_lock, flags); -} - -/* - * "Unplug" a node from the device tree. The caller must hold - * a reference to the node. The memory associated with the node - * is not freed until its refcount goes to zero. - */ -void of_detach_node(struct device_node *np) -{ - struct device_node *parent; - unsigned long flags; - - write_lock_irqsave(&devtree_lock, flags); - - parent = np->parent; - if (!parent) - goto out_unlock; - - if (allnodes == np) - allnodes = np->allnext; - else { - struct device_node *prev; - for (prev = allnodes; - prev->allnext != np; - prev = prev->allnext) - ; - prev->allnext = np->allnext; - } - - if (parent->child == np) - parent->child = np->sibling; - else { - struct device_node *prevsib; - for (prevsib = np->parent->child; - prevsib->sibling != np; - prevsib = prevsib->sibling) - ; - prevsib->sibling = np->sibling; - } - - of_node_set_flag(np, OF_DETACHED); - -out_unlock: - write_unlock_irqrestore(&devtree_lock, flags); -} - -/* - * Add a property to a node - */ -int prom_add_property(struct device_node *np, struct property *prop) -{ - struct property **next; - unsigned long flags; - - prop->next = NULL; - write_lock_irqsave(&devtree_lock, flags); - next = &np->properties; - while (*next) { - if (strcmp(prop->name, (*next)->name) == 0) { - /* duplicate ! don't insert it */ - write_unlock_irqrestore(&devtree_lock, flags); - return -1; - } - next = &(*next)->next; - } - *next = prop; - write_unlock_irqrestore(&devtree_lock, flags); - -#ifdef CONFIG_PROC_DEVICETREE - /* try to add to proc as well if it was initialized */ - if (np->pde) - proc_device_tree_add_prop(np->pde, prop); -#endif /* CONFIG_PROC_DEVICETREE */ - - return 0; -} - -/* - * Remove a property from a node. Note that we don't actually - * remove it, since we have given out who-knows-how-many pointers - * to the data using get-property. Instead we just move the property - * to the "dead properties" list, so it won't be found any more. - */ -int prom_remove_property(struct device_node *np, struct property *prop) -{ - struct property **next; - unsigned long flags; - int found = 0; - - write_lock_irqsave(&devtree_lock, flags); - next = &np->properties; - while (*next) { - if (*next == prop) { - /* found the node */ - *next = prop->next; - prop->next = np->deadprops; - np->deadprops = prop; - found = 1; - break; - } - next = &(*next)->next; - } - write_unlock_irqrestore(&devtree_lock, flags); - - if (!found) - return -ENODEV; - -#ifdef CONFIG_PROC_DEVICETREE - /* try to remove the proc node as well */ - if (np->pde) - proc_device_tree_remove_prop(np->pde, prop); -#endif /* CONFIG_PROC_DEVICETREE */ - - return 0; -} - -/* - * Update a property in a node. Note that we don't actually - * remove it, since we have given out who-knows-how-many pointers - * to the data using get-property. Instead we just move the property - * to the "dead properties" list, and add the new property to the - * property list - */ -int prom_update_property(struct device_node *np, - struct property *newprop, - struct property *oldprop) -{ - struct property **next; - unsigned long flags; - int found = 0; - - write_lock_irqsave(&devtree_lock, flags); - next = &np->properties; - while (*next) { - if (*next == oldprop) { - /* found the node */ - newprop->next = oldprop->next; - *next = newprop; - oldprop->next = np->deadprops; - np->deadprops = oldprop; - found = 1; - break; - } - next = &(*next)->next; - } - write_unlock_irqrestore(&devtree_lock, flags); - - if (!found) - return -ENODEV; - -#ifdef CONFIG_PROC_DEVICETREE - /* try to add to proc as well if it was initialized */ - if (np->pde) - proc_device_tree_update_prop(np->pde, newprop, oldprop); -#endif /* CONFIG_PROC_DEVICETREE */ - - return 0; -} - #if defined(CONFIG_DEBUG_FS) && defined(DEBUG) static struct debugfs_blob_wrapper flat_dt_blob; diff --git a/arch/mips/bcm47xx/prom.c b/arch/mips/bcm47xx/prom.c index c51405e..29d3cbf 100644 --- a/arch/mips/bcm47xx/prom.c +++ b/arch/mips/bcm47xx/prom.c @@ -141,6 +141,14 @@ static __init void prom_init_mem(void) break; } + /* Ignoring the last page when ddr size is 128M. Cached + * accesses to last page is causing the processor to prefetch + * using address above 128M stepping out of the ddr address + * space. + */ + if (mem == 0x8000000) + mem -= 0x1000; + add_memory_region(0, mem, BOOT_MEM_RAM); } diff --git a/arch/mips/mm/highmem.c b/arch/mips/mm/highmem.c index e274fda..127d732 100644 --- a/arch/mips/mm/highmem.c +++ b/arch/mips/mm/highmem.c @@ -1,5 +1,6 @@ #include <linux/module.h> #include <linux/highmem.h> +#include <linux/sched.h> #include <linux/smp.h> #include <asm/fixmap.h> #include <asm/tlbflush.h> diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index 524d935..f388dc6 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -18,7 +18,6 @@ config PARISC select BUG select HAVE_PERF_EVENTS select GENERIC_ATOMIC64 if !64BIT - select HAVE_ARCH_TRACEHOOK help The PA-RISC microprocessor is designed by Hewlett-Packard and used in many of their workstations & servers (HP9000 700 and 800 series, diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c index f7064ab..9e74bfe 100644 --- a/arch/parisc/kernel/pci.c +++ b/arch/parisc/kernel/pci.c @@ -18,7 +18,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <asm/cache.h> /* for L1_CACHE_BYTES */ #include <asm/superio.h> #define DEBUG_RESOURCES 0 @@ -123,6 +122,10 @@ static int __init pcibios_init(void) } else { printk(KERN_WARNING "pci_bios != NULL but init() is!\n"); } + + /* Set the CLS for PCI as early as possible. */ + pci_cache_line_size = pci_dfl_cache_line_size; + return 0; } @@ -171,7 +174,7 @@ void pcibios_set_master(struct pci_dev *dev) ** upper byte is PCI_LATENCY_TIMER. */ pci_write_config_word(dev, PCI_CACHE_LINE_SIZE, - (0x80 << 8) | (L1_CACHE_BYTES / sizeof(u32))); + (0x80 << 8) | pci_cache_line_size); } diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 654bba5..155d571 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -173,6 +173,7 @@ config PPC_OF config OF def_bool y + select OF_FLATTREE config PPC_UDBG_16550 bool diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h index 2ab9cbd..ddd408a 100644 --- a/arch/powerpc/include/asm/prom.h +++ b/arch/powerpc/include/asm/prom.h @@ -23,21 +23,8 @@ #include <asm/irq.h> #include <asm/atomic.h> -#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT 1 -#define OF_ROOT_NODE_SIZE_CELLS_DEFAULT 1 - -#define of_compat_cmp(s1, s2, l) strcasecmp((s1), (s2)) -#define of_prop_cmp(s1, s2) strcmp((s1), (s2)) -#define of_node_cmp(s1, s2) strcasecmp((s1), (s2)) - -extern struct device_node *of_chosen; - #define HAVE_ARCH_DEVTREE_FIXUPS -/* For updating the device tree at runtime */ -extern void of_attach_node(struct device_node *); -extern void of_detach_node(struct device_node *); - #ifdef CONFIG_PPC32 /* * PCI <-> OF matching functions @@ -52,11 +39,6 @@ extern struct device_node* pci_device_to_OF_node(struct pci_dev *); extern void pci_create_OF_bus_map(void); #endif -extern struct resource *request_OF_resource(struct device_node* node, - int index, const char* name_postfix); -extern int release_OF_resource(struct device_node* node, int index); - - /* * OF address retreival & translation */ diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c index 1a4fc0d..666d08d 100644 --- a/arch/powerpc/kernel/of_platform.c +++ b/arch/powerpc/kernel/of_platform.c @@ -214,7 +214,7 @@ EXPORT_SYMBOL(of_find_device_by_node); static int of_dev_phandle_match(struct device *dev, void *data) { phandle *ph = data; - return to_of_device(dev)->node->linux_phandle == *ph; + return to_of_device(dev)->node->phandle == *ph; } struct of_device *of_find_device_by_phandle(phandle ph) diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index ccf56ac..d43fc65 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -224,7 +224,7 @@ long sys_pciconfig_iobase(long which, unsigned long in_bus, * G5 machines... So when something asks for bus 0 io base * (bus 0 is HT root), we return the AGP one instead. */ - if (in_bus == 0 && machine_is_compatible("MacRISC4")) { + if (in_bus == 0 && of_machine_is_compatible("MacRISC4")) { struct device_node *agp; agp = of_find_compatible_node(NULL, NULL, "u3-agp"); diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 4ec3008..43238b2 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -61,365 +61,12 @@ #define DBG(fmt...) #endif - -static int __initdata dt_root_addr_cells; -static int __initdata dt_root_size_cells; - #ifdef CONFIG_PPC64 int __initdata iommu_is_off; int __initdata iommu_force_on; unsigned long tce_alloc_start, tce_alloc_end; #endif -typedef u32 cell_t; - -#if 0 -static struct boot_param_header *initial_boot_params __initdata; -#else -struct boot_param_header *initial_boot_params; -#endif - -extern struct device_node *allnodes; /* temporary while merging */ - -extern rwlock_t devtree_lock; /* temporary while merging */ - -/* export that to outside world */ -struct device_node *of_chosen; - -static inline char *find_flat_dt_string(u32 offset) -{ - return ((char *)initial_boot_params) + - initial_boot_params->off_dt_strings + offset; -} - -/** - * This function is used to scan the flattened device-tree, it is - * used to extract the memory informations at boot before we can - * unflatten the tree - */ -int __init of_scan_flat_dt(int (*it)(unsigned long node, - const char *uname, int depth, - void *data), - void *data) -{ - unsigned long p = ((unsigned long)initial_boot_params) + - initial_boot_params->off_dt_struct; - int rc = 0; - int depth = -1; - - do { - u32 tag = *((u32 *)p); - char *pathp; - - p += 4; - if (tag == OF_DT_END_NODE) { - depth --; - continue; - } - if (tag == OF_DT_NOP) - continue; - if (tag == OF_DT_END) - break; - if (tag == OF_DT_PROP) { - u32 sz = *((u32 *)p); - p += 8; - if (initial_boot_params->version < 0x10) - p = _ALIGN(p, sz >= 8 ? 8 : 4); - p += sz; - p = _ALIGN(p, 4); - continue; - } - if (tag != OF_DT_BEGIN_NODE) { - printk(KERN_WARNING "Invalid tag %x scanning flattened" - " device tree !\n", tag); - return -EINVAL; - } - depth++; - pathp = (char *)p; - p = _ALIGN(p + strlen(pathp) + 1, 4); - if ((*pathp) == '/') { - char *lp, *np; - for (lp = NULL, np = pathp; *np; np++) - if ((*np) == '/') - lp = np+1; - if (lp != NULL) - pathp = lp; - } - rc = it(p, pathp, depth, data); - if (rc != 0) - break; - } while(1); - - return rc; -} - -unsigned long __init of_get_flat_dt_root(void) -{ - unsigned long p = ((unsigned long)initial_boot_params) + - initial_boot_params->off_dt_struct; - - while(*((u32 *)p) == OF_DT_NOP) - p += 4; - BUG_ON (*((u32 *)p) != OF_DT_BEGIN_NODE); - p += 4; - return _ALIGN(p + strlen((char *)p) + 1, 4); -} - -/** - * This function can be used within scan_flattened_dt callback to get - * access to properties - */ -void* __init of_get_flat_dt_prop(unsigned long node, const char *name, - unsigned long *size) -{ - unsigned long p = node; - - do { - u32 tag = *((u32 *)p); - u32 sz, noff; - const char *nstr; - - p += 4; - if (tag == OF_DT_NOP) - continue; - if (tag != OF_DT_PROP) - return NULL; - - sz = *((u32 *)p); - noff = *((u32 *)(p + 4)); - p += 8; - if (initial_boot_params->version < 0x10) - p = _ALIGN(p, sz >= 8 ? 8 : 4); - - nstr = find_flat_dt_string(noff); - if (nstr == NULL) { - printk(KERN_WARNING "Can't find property index" - " name !\n"); - return NULL; - } - if (strcmp(name, nstr) == 0) { - if (size) - *size = sz; - return (void *)p; - } - p += sz; - p = _ALIGN(p, 4); - } while(1); -} - -int __init of_flat_dt_is_compatible(unsigned long node, const char *compat) -{ - const char* cp; - unsigned long cplen, l; - - cp = of_get_flat_dt_prop(node, "compatible", &cplen); - if (cp == NULL) - return 0; - while (cplen > 0) { - if (strncasecmp(cp, compat, strlen(compat)) == 0) - return 1; - l = strlen(cp) + 1; - cp += l; - cplen -= l; - } - - return 0; -} - -static void *__init unflatten_dt_alloc(unsigned long *mem, unsigned long size, - unsigned long align) -{ - void *res; - - *mem = _ALIGN(*mem, align); - res = (void *)*mem; - *mem += size; - - return res; -} - -static unsigned long __init unflatten_dt_node(unsigned long mem, - unsigned long *p, - struct device_node *dad, - struct device_node ***allnextpp, - unsigned long fpsize) -{ - struct device_node *np; - struct property *pp, **prev_pp = NULL; - char *pathp; - u32 tag; - unsigned int l, allocl; - int has_name = 0; - int new_format = 0; - - tag = *((u32 *)(*p)); - if (tag != OF_DT_BEGIN_NODE) { - printk("Weird tag at start of node: %x\n", tag); - return mem; - } - *p += 4; - pathp = (char *)*p; - l = allocl = strlen(pathp) + 1; - *p = _ALIGN(*p + l, 4); - - /* version 0x10 has a more compact unit name here instead of the full - * path. we accumulate the full path size using "fpsize", we'll rebuild - * it later. We detect this because the first character of the name is - * not '/'. - */ - if ((*pathp) != '/') { - new_format = 1; - if (fpsize == 0) { - /* root node: special case. fpsize accounts for path - * plus terminating zero. root node only has '/', so - * fpsize should be 2, but we want to avoid the first - * level nodes to have two '/' so we use fpsize 1 here - */ - fpsize = 1; - allocl = 2; - } else { - /* account for '/' and path size minus terminal 0 - * already in 'l' - */ - fpsize += l; - allocl = fpsize; - } - } - - - np = unflatten_dt_alloc(&mem, sizeof(struct device_node) + allocl, - __alignof__(struct device_node)); - if (allnextpp) { - memset(np, 0, sizeof(*np)); - np->full_name = ((char*)np) + sizeof(struct device_node); - if (new_format) { - char *p = np->full_name; - /* rebuild full path for new format */ - if (dad && dad->parent) { - strcpy(p, dad->full_name); -#ifdef DEBUG - if ((strlen(p) + l + 1) != allocl) { - DBG("%s: p: %d, l: %d, a: %d\n", - pathp, (int)strlen(p), l, allocl); - } -#endif - p += strlen(p); - } - *(p++) = '/'; - memcpy(p, pathp, l); - } else - memcpy(np->full_name, pathp, l); - prev_pp = &np->properties; - **allnextpp = np; - *allnextpp = &np->allnext; - if (dad != NULL) { - np->parent = dad; - /* we temporarily use the next field as `last_child'*/ - if (dad->next == 0) - dad->child = np; - else - dad->next->sibling = np; - dad->next = np; - } - kref_init(&np->kref); - } - while(1) { - u32 sz, noff; - char *pname; - - tag = *((u32 *)(*p)); - if (tag == OF_DT_NOP) { - *p += 4; - continue; - } - if (tag != OF_DT_PROP) - break; - *p += 4; - sz = *((u32 *)(*p)); - noff = *((u32 *)((*p) + 4)); - *p += 8; - if (initial_boot_params->version < 0x10) - *p = _ALIGN(*p, sz >= 8 ? 8 : 4); - - pname = find_flat_dt_string(noff); - if (pname == NULL) { - printk("Can't find property name in list !\n"); - break; - } - if (strcmp(pname, "name") == 0) - has_name = 1; - l = strlen(pname) + 1; - pp = unflatten_dt_alloc(&mem, sizeof(struct property), - __alignof__(struct property)); - if (allnextpp) { - if (strcmp(pname, "linux,phandle") == 0) { - np->node = *((u32 *)*p); - if (np->linux_phandle == 0) - np->linux_phandle = np->node; - } - if (strcmp(pname, "ibm,phandle") == 0) - np->linux_phandle = *((u32 *)*p); - pp->name = pname; - pp->length = sz; - pp->value = (void *)*p; - *prev_pp = pp; - prev_pp = &pp->next; - } - *p = _ALIGN((*p) + sz, 4); - } - /* with version 0x10 we may not have the name property, recreate - * it here from the unit name if absent - */ - if (!has_name) { - char *p = pathp, *ps = pathp, *pa = NULL; - int sz; - - while (*p) { - if ((*p) == '@') - pa = p; - if ((*p) == '/') - ps = p + 1; - p++; - } - if (pa < ps) - pa = p; - sz = (pa - ps) + 1; - pp = unflatten_dt_alloc(&mem, sizeof(struct property) + sz, - __alignof__(struct property)); - if (allnextpp) { - pp->name = "name"; - pp->length = sz; - pp->value = pp + 1; - *prev_pp = pp; - prev_pp = &pp->next; - memcpy(pp->value, ps, sz - 1); - ((char *)pp->value)[sz - 1] = 0; - DBG("fixed up name for %s -> %s\n", pathp, - (char *)pp->value); - } - } - if (allnextpp) { - *prev_pp = NULL; - np->name = of_get_property(np, "name", NULL); - np->type = of_get_property(np, "device_type", NULL); - - if (!np->name) - np->name = "<NULL>"; - if (!np->type) - np->type = "<NULL>"; - } - while (tag == OF_DT_BEGIN_NODE) { - mem = unflatten_dt_node(mem, p, np, allnextpp, fpsize); - tag = *((u32 *)(*p)); - } - if (tag != OF_DT_END_NODE) { - printk("Weird tag at end of node: %x\n", tag); - return mem; - } - *p += 4; - return mem; -} - static int __init early_parse_mem(char *p) { if (!p) @@ -446,7 +93,7 @@ static void __init move_device_tree(void) DBG("-> move_device_tree\n"); start = __pa(initial_boot_params); - size = initial_boot_params->totalsize; + size = be32_to_cpu(initial_boot_params->totalsize); if ((memory_limit && (start + size) > memory_limit) || overlaps_crashkernel(start, size)) { @@ -459,54 +106,6 @@ static void __init move_device_tree(void) DBG("<- move_device_tree\n"); } -/** - * unflattens the device-tree passed by the firmware, creating the - * tree of struct device_node. It also fills the "name" and "type" - * pointers of the nodes so the normal device-tree walking functions - * can be used (this used to be done by finish_device_tree) - */ -void __init unflatten_device_tree(void) -{ - unsigned long start, mem, size; - struct device_node **allnextp = &allnodes; - - DBG(" -> unflatten_device_tree()\n"); - - /* First pass, scan for size */ - start = ((unsigned long)initial_boot_params) + - initial_boot_params->off_dt_struct; - size = unflatten_dt_node(0, &start, NULL, NULL, 0); - size = (size | 3) + 1; - - DBG(" size is %lx, allocating...\n", size); - - /* Allocate memory for the expanded device tree */ - mem = lmb_alloc(size + 4, __alignof__(struct device_node)); - mem = (unsigned long) __va(mem); - - ((u32 *)mem)[size / 4] = 0xdeadbeef; - - DBG(" unflattening %lx...\n", mem); - - /* Second pass, do actual unflattening */ - start = ((unsigned long)initial_boot_params) + - initial_boot_params->off_dt_struct; - unflatten_dt_node(mem, &start, NULL, &allnextp, 0); - if (*((u32 *)start) != OF_DT_END) - printk(KERN_WARNING "Weird tag at end of tree: %08x\n", *((u32 *)start)); - if (((u32 *)mem)[size / 4] != 0xdeadbeef) - printk(KERN_WARNING "End of tree marker overwritten: %08x\n", - ((u32 *)mem)[size / 4] ); - *allnextp = NULL; - - /* Get pointer to OF "/chosen" node for use everywhere */ - of_chosen = of_find_node_by_path("/chosen"); - if (of_chosen == NULL) - of_chosen = of_find_node_by_path("/chosen@0"); - - DBG(" <- unflatten_device_tree()\n"); -} - /* * ibm,pa-features is a per-cpu property that contains a string of * attribute descriptors, each of which has a 2 byte header plus up @@ -763,48 +362,9 @@ static int __init early_init_dt_scan_cpus(unsigned long node, return 0; } -#ifdef CONFIG_BLK_DEV_INITRD -static void __init early_init_dt_check_for_initrd(unsigned long node) -{ - unsigned long l; - u32 *prop; - - DBG("Looking for initrd properties... "); - - prop = of_get_flat_dt_prop(node, "linux,initrd-start", &l); - if (prop) { - initrd_start = (unsigned long)__va(of_read_ulong(prop, l/4)); - - prop = of_get_flat_dt_prop(node, "linux,initrd-end", &l); - if (prop) { - initrd_end = (unsigned long) - __va(of_read_ulong(prop, l/4)); - initrd_below_start_ok = 1; - } else { - initrd_start = 0; - } - } - - DBG("initrd_start=0x%lx initrd_end=0x%lx\n", initrd_start, initrd_end); -} -#else -static inline void early_init_dt_check_for_initrd(unsigned long node) -{ -} -#endif /* CONFIG_BLK_DEV_INITRD */ - -static int __init early_init_dt_scan_chosen(unsigned long node, - const char *uname, int depth, void *data) +void __init early_init_dt_scan_chosen_arch(unsigned long node) { unsigned long *lprop; - unsigned long l; - char *p; - - DBG("search \"chosen\", depth: %d, uname: %s\n", depth, uname); - - if (depth != 1 || - (strcmp(uname, "chosen") != 0 && strcmp(uname, "chosen@0") != 0)) - return 0; #ifdef CONFIG_PPC64 /* check if iommu is forced on or off */ @@ -815,17 +375,17 @@ static int __init early_init_dt_scan_chosen(unsigned long node, #endif /* mem=x on the command line is the preferred mechanism */ - lprop = of_get_flat_dt_prop(node, "linux,memory-limit", NULL); - if (lprop) - memory_limit = *lprop; + lprop = of_get_flat_dt_prop(node, "linux,memory-limit", NULL); + if (lprop) + memory_limit = *lprop; #ifdef CONFIG_PPC64 - lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-start", NULL); - if (lprop) - tce_alloc_start = *lprop; - lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-end", NULL); - if (lprop) - tce_alloc_end = *lprop; + lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-start", NULL); + if (lprop) + tce_alloc_start = *lprop; + lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-end", NULL); + if (lprop) + tce_alloc_end = *lprop; #endif #ifdef CONFIG_KEXEC @@ -837,51 +397,6 @@ static int __init early_init_dt_scan_chosen(unsigned long node, if (lprop) crashk_res.end = crashk_res.start + *lprop - 1; #endif - - early_init_dt_check_for_initrd(node); - - /* Retreive command line */ - p = of_get_flat_dt_prop(node, "bootargs", &l); - if (p != NULL && l > 0) - strlcpy(cmd_line, p, min((int)l, COMMAND_LINE_SIZE)); - -#ifdef CONFIG_CMDLINE - if (p == NULL || l == 0 || (l == 1 && (*p) == 0)) - strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE); -#endif /* CONFIG_CMDLINE */ - - DBG("Command line is: %s\n", cmd_line); - - /* break now */ - return 1; -} - -static int __init early_init_dt_scan_root(unsigned long node, - const char *uname, int depth, void *data) -{ - u32 *prop; - - if (depth != 0) - return 0; - - prop = of_get_flat_dt_prop(node, "#size-cells", NULL); - dt_root_size_cells = (prop == NULL) ? 1 : *prop; - DBG("dt_root_size_cells = %x\n", dt_root_size_cells); - - prop = of_get_flat_dt_prop(node, "#address-cells", NULL); - dt_root_addr_cells = (prop == NULL) ? 2 : *prop; - DBG("dt_root_addr_cells = %x\n", dt_root_addr_cells); - - /* break now */ - return 1; -} - -static u64 __init dt_mem_next_cell(int s, cell_t **cellp) -{ - cell_t *p = *cellp; - - *cellp = p + s; - return of_read_number(p, s); } #ifdef CONFIG_PPC_PSERIES @@ -893,22 +408,22 @@ static u64 __init dt_mem_next_cell(int s, cell_t **cellp) */ static int __init early_init_dt_scan_drconf_memory(unsigned long node) { - cell_t *dm, *ls, *usm; + __be32 *dm, *ls, *usm; unsigned long l, n, flags; u64 base, size, lmb_size; unsigned int is_kexec_kdump = 0, rngs; ls = of_get_flat_dt_prop(node, "ibm,lmb-size", &l); - if (ls == NULL || l < dt_root_size_cells * sizeof(cell_t)) + if (ls == NULL || l < dt_root_size_cells * sizeof(__be32)) return 0; lmb_size = dt_mem_next_cell(dt_root_size_cells, &ls); dm = of_get_flat_dt_prop(node, "ibm,dynamic-memory", &l); - if (dm == NULL || l < sizeof(cell_t)) + if (dm == NULL || l < sizeof(__be32)) return 0; n = *dm++; /* number of entries */ - if (l < (n * (dt_root_addr_cells + 4) + 1) * sizeof(cell_t)) + if (l < (n * (dt_root_addr_cells + 4) + 1) * sizeof(__be32)) return 0; /* check if this is a kexec/kdump kernel. */ @@ -963,65 +478,47 @@ static int __init early_init_dt_scan_drconf_memory(unsigned long node) #define early_init_dt_scan_drconf_memory(node) 0 #endif /* CONFIG_PPC_PSERIES */ -static int __init early_init_dt_scan_memory(unsigned long node, - const char *uname, int depth, void *data) +static int __init early_init_dt_scan_memory_ppc(unsigned long node, + const char *uname, + int depth, void *data) { - char *type = of_get_flat_dt_prop(node, "device_type", NULL); - cell_t *reg, *endp; - unsigned long l; - - /* Look for the ibm,dynamic-reconfiguration-memory node */ if (depth == 1 && strcmp(uname, "ibm,dynamic-reconfiguration-memory") == 0) return early_init_dt_scan_drconf_memory(node); + + return early_init_dt_scan_memory(node, uname, depth, data); +} - /* We are scanning "memory" nodes only */ - if (type == NULL) { - /* - * The longtrail doesn't have a device_type on the - * /memory node, so look for the node called /memory@0. - */ - if (depth != 1 || strcmp(uname, "memory@0") != 0) - return 0; - } else if (strcmp(type, "memory") != 0) - return 0; - - reg = of_get_flat_dt_prop(node, "linux,usable-memory", &l); - if (reg == NULL) - reg = of_get_flat_dt_prop(node, "reg", &l); - if (reg == NULL) - return 0; - - endp = reg + (l / sizeof(cell_t)); - - DBG("memory scan node %s, reg size %ld, data: %x %x %x %x,\n", - uname, l, reg[0], reg[1], reg[2], reg[3]); - - while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) { - u64 base, size; +void __init early_init_dt_add_memory_arch(u64 base, u64 size) +{ +#if defined(CONFIG_PPC64) + if (iommu_is_off) { + if (base >= 0x80000000ul) + return; + if ((base + size) > 0x80000000ul) + size = 0x80000000ul - base; + } +#endif - base = dt_mem_next_cell(dt_root_addr_cells, ®); - size = dt_mem_next_cell(dt_root_size_cells, ®); + lmb_add(base, size); - if (size == 0) - continue; - DBG(" - %llx , %llx\n", (unsigned long long)base, - (unsigned long long)size); -#ifdef CONFIG_PPC64 - if (iommu_is_off) { - if (base >= 0x80000000ul) - continue; - if ((base + size) > 0x80000000ul) - size = 0x80000000ul - base; - } -#endif - lmb_add(base, size); + memstart_addr = min((u64)memstart_addr, base); +} - memstart_addr = min((u64)memstart_addr, base); - } +u64 __init early_init_dt_alloc_memory_arch(u64 size, u64 align) +{ + return lmb_alloc(size, align); +} - return 0; +#ifdef CONFIG_BLK_DEV_INITRD +void __init early_init_dt_setup_initrd_arch(unsigned long start, + unsigned long end) +{ + initrd_start = (unsigned long)__va(start); + initrd_end = (unsigned long)__va(end); + initrd_below_start_ok = 1; } +#endif static void __init early_reserve_mem(void) { @@ -1186,7 +683,7 @@ void __init early_init_devtree(void *params) /* Scan memory nodes and rebuild LMBs */ lmb_init(); of_scan_flat_dt(early_init_dt_scan_root, NULL); - of_scan_flat_dt(early_init_dt_scan_memory, NULL); + of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL); /* Save command line for /proc/cmdline and then parse parameters */ strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE); @@ -1234,25 +731,6 @@ void __init early_init_devtree(void *params) DBG(" <- early_init_devtree()\n"); } - -/** - * Indicates whether the root node has a given value in its - * compatible property. - */ -int machine_is_compatible(const char *compat) -{ - struct device_node *root; - int rc = 0; - - root = of_find_node_by_path("/"); - if (root) { - rc = of_device_is_compatible(root, compat); - of_node_put(root); - } - return rc; -} -EXPORT_SYMBOL(machine_is_compatible); - /******* * * New implementation of the OF "find" APIs, return a refcounted @@ -1265,27 +743,6 @@ EXPORT_SYMBOL(machine_is_compatible); *******/ /** - * of_find_node_by_phandle - Find a node given a phandle - * @handle: phandle of the node to find - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_find_node_by_phandle(phandle handle) -{ - struct device_node *np; - - read_lock(&devtree_lock); - for (np = allnodes; np != 0; np = np->allnext) - if (np->linux_phandle == handle) - break; - of_node_get(np); - read_unlock(&devtree_lock); - return np; -} -EXPORT_SYMBOL(of_find_node_by_phandle); - -/** * of_find_next_cache_node - Find a node's subsidiary cache * @np: node of type "cpu" or "cache" * @@ -1316,138 +773,6 @@ struct device_node *of_find_next_cache_node(struct device_node *np) return NULL; } -/** - * of_node_get - Increment refcount of a node - * @node: Node to inc refcount, NULL is supported to - * simplify writing of callers - * - * Returns node. - */ -struct device_node *of_node_get(struct device_node *node) -{ - if (node) - kref_get(&node->kref); - return node; -} -EXPORT_SYMBOL(of_node_get); - -static inline struct device_node * kref_to_device_node(struct kref *kref) -{ - return container_of(kref, struct device_node, kref); -} - -/** - * of_node_release - release a dynamically allocated node - * @kref: kref element of the node to be released - * - * In of_node_put() this function is passed to kref_put() - * as the destructor. - */ -static void of_node_release(struct kref *kref) -{ - struct device_node *node = kref_to_device_node(kref); - struct property *prop = node->properties; - - /* We should never be releasing nodes that haven't been detached. */ - if (!of_node_check_flag(node, OF_DETACHED)) { - printk("WARNING: Bad of_node_put() on %s\n", node->full_name); - dump_stack(); - kref_init(&node->kref); - return; - } - - if (!of_node_check_flag(node, OF_DYNAMIC)) - return; - - while (prop) { - struct property *next = prop->next; - kfree(prop->name); - kfree(prop->value); - kfree(prop); - prop = next; - - if (!prop) { - prop = node->deadprops; - node->deadprops = NULL; - } - } - kfree(node->full_name); - kfree(node->data); - kfree(node); -} - -/** - * of_node_put - Decrement refcount of a node - * @node: Node to dec refcount, NULL is supported to - * simplify writing of callers - * - */ -void of_node_put(struct device_node *node) -{ - if (node) - kref_put(&node->kref, of_node_release); -} -EXPORT_SYMBOL(of_node_put); - -/* - * Plug a device node into the tree and global list. - */ -void of_attach_node(struct device_node *np) -{ - unsigned long flags; - - write_lock_irqsave(&devtree_lock, flags); - np->sibling = np->parent->child; - np->allnext = allnodes; - np->parent->child = np; - allnodes = np; - write_unlock_irqrestore(&devtree_lock, flags); -} - -/* - * "Unplug" a node from the device tree. The caller must hold - * a reference to the node. The memory associated with the node - * is not freed until its refcount goes to zero. - */ -void of_detach_node(struct device_node *np) -{ - struct device_node *parent; - unsigned long flags; - - write_lock_irqsave(&devtree_lock, flags); - - parent = np->parent; - if (!parent) - goto out_unlock; - - if (allnodes == np) - allnodes = np->allnext; - else { - struct device_node *prev; - for (prev = allnodes; - prev->allnext != np; - prev = prev->allnext) - ; - prev->allnext = np->allnext; - } - - if (parent->child == np) - parent->child = np->sibling; - else { - struct device_node *prevsib; - for (prevsib = np->parent->child; - prevsib->sibling != np; - prevsib = prevsib->sibling) - ; - prevsib->sibling = np->sibling; - } - - of_node_set_flag(np, OF_DETACHED); - -out_unlock: - write_unlock_irqrestore(&devtree_lock, flags); -} - #ifdef CONFIG_PPC_PSERIES /* * Fix up the uninitialized fields in a new device node: @@ -1479,9 +804,9 @@ static int of_finish_dynamic_node(struct device_node *node) if (machine_is(powermac)) return -ENODEV; - /* fix up new node's linux_phandle field */ + /* fix up new node's phandle field */ if ((ibm_phandle = of_get_property(node, "ibm,phandle", NULL))) - node->linux_phandle = *ibm_phandle; + node->phandle = *ibm_phandle; out: of_node_put(parent); @@ -1520,120 +845,6 @@ static int __init prom_reconfig_setup(void) __initcall(prom_reconfig_setup); #endif -/* - * Add a property to a node - */ -int prom_add_property(struct device_node* np, struct property* prop) -{ - struct property **next; - unsigned long flags; - - prop->next = NULL; - write_lock_irqsave(&devtree_lock, flags); - next = &np->properties; - while (*next) { - if (strcmp(prop->name, (*next)->name) == 0) { - /* duplicate ! don't insert it */ - write_unlock_irqrestore(&devtree_lock, flags); - return -1; - } - next = &(*next)->next; - } - *next = prop; - write_unlock_irqrestore(&devtree_lock, flags); - -#ifdef CONFIG_PROC_DEVICETREE - /* try to add to proc as well if it was initialized */ - if (np->pde) - proc_device_tree_add_prop(np->pde, prop); -#endif /* CONFIG_PROC_DEVICETREE */ - - return 0; -} - -/* - * Remove a property from a node. Note that we don't actually - * remove it, since we have given out who-knows-how-many pointers - * to the data using get-property. Instead we just move the property - * to the "dead properties" list, so it won't be found any more. - */ -int prom_remove_property(struct device_node *np, struct property *prop) -{ - struct property **next; - unsigned long flags; - int found = 0; - - write_lock_irqsave(&devtree_lock, flags); - next = &np->properties; - while (*next) { - if (*next == prop) { - /* found the node */ - *next = prop->next; - prop->next = np->deadprops; - np->deadprops = prop; - found = 1; - break; - } - next = &(*next)->next; - } - write_unlock_irqrestore(&devtree_lock, flags); - - if (!found) - return -ENODEV; - -#ifdef CONFIG_PROC_DEVICETREE - /* try to remove the proc node as well */ - if (np->pde) - proc_device_tree_remove_prop(np->pde, prop); -#endif /* CONFIG_PROC_DEVICETREE */ - - return 0; -} - -/* - * Update a property in a node. Note that we don't actually - * remove it, since we have given out who-knows-how-many pointers - * to the data using get-property. Instead we just move the property - * to the "dead properties" list, and add the new property to the - * property list - */ -int prom_update_property(struct device_node *np, - struct property *newprop, - struct property *oldprop) -{ - struct property **next; - unsigned long flags; - int found = 0; - - write_lock_irqsave(&devtree_lock, flags); - next = &np->properties; - while (*next) { - if (*next == oldprop) { - /* found the node */ - newprop->next = oldprop->next; - *next = newprop; - oldprop->next = np->deadprops; - np->deadprops = oldprop; - found = 1; - break; - } - next = &(*next)->next; - } - write_unlock_irqrestore(&devtree_lock, flags); - - if (!found) - return -ENODEV; - -#ifdef CONFIG_PROC_DEVICETREE - /* try to add to proc as well if it was initialized */ - if (np->pde) - proc_device_tree_update_prop(np->pde, newprop, oldprop); -#endif /* CONFIG_PROC_DEVICETREE */ - - return 0; -} - - /* Find the device node for a given logical cpu number, also returns the cpu * local thread number (index in ibm,interrupt-server#s) if relevant and * asked for (non NULL) diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index 04af81e..04d105d 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -341,7 +341,8 @@ static void __init mpc85xx_mds_pic_init(void) } mpic = mpic_alloc(np, r.start, - MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN | + MPIC_BROKEN_FRR_NIRQS, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); of_node_put(np); diff --git a/arch/powerpc/platforms/85xx/xes_mpc85xx.c b/arch/powerpc/platforms/85xx/xes_mpc85xx.c index 1b42605..0125604 100644 --- a/arch/powerpc/platforms/85xx/xes_mpc85xx.c +++ b/arch/powerpc/platforms/85xx/xes_mpc85xx.c @@ -80,8 +80,8 @@ static void xes_mpc85xx_configure_l2(void __iomem *l2_base) printk(KERN_INFO "xes_mpc85xx: Enabling L2 as cache\n"); ctl = MPC85xx_L2CTL_L2E | MPC85xx_L2CTL_L2I; - if (machine_is_compatible("MPC8540") || - machine_is_compatible("MPC8560")) + if (of_machine_is_compatible("MPC8540") || + of_machine_is_compatible("MPC8560")) /* * Assume L2 SRAM is used fully for cache, so set * L2BLKSZ (bits 4:5) to match L2SIZ (bits 2:3). diff --git a/arch/powerpc/platforms/cell/cbe_powerbutton.c b/arch/powerpc/platforms/cell/cbe_powerbutton.c index dcddaa5..f75a4da 100644 --- a/arch/powerpc/platforms/cell/cbe_powerbutton.c +++ b/arch/powerpc/platforms/cell/cbe_powerbutton.c @@ -48,7 +48,7 @@ static int __init cbe_powerbutton_init(void) int ret = 0; struct input_dev *dev; - if (!machine_is_compatible("IBM,CBPLUS-1.0")) { + if (!of_machine_is_compatible("IBM,CBPLUS-1.0")) { printk(KERN_ERR "%s: Not a cell blade.\n", __func__); ret = -ENODEV; goto out; diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c index 5e0a191..608fd2b 100644 --- a/arch/powerpc/platforms/cell/ras.c +++ b/arch/powerpc/platforms/cell/ras.c @@ -255,7 +255,7 @@ static int __init cbe_sysreset_init(void) { struct cbe_pmd_regs __iomem *regs; - sysreset_hack = machine_is_compatible("IBM,CBPLUS-1.0"); + sysreset_hack = of_machine_is_compatible("IBM,CBPLUS-1.0"); if (!sysreset_hack) return 0; diff --git a/arch/powerpc/platforms/cell/spu_manage.c b/arch/powerpc/platforms/cell/spu_manage.c index 4c506c1..891f18e 100644 --- a/arch/powerpc/platforms/cell/spu_manage.c +++ b/arch/powerpc/platforms/cell/spu_manage.c @@ -457,7 +457,7 @@ neighbour_spu(int cbe, struct device_node *target, struct device_node *avoid) continue; vic_handles = of_get_property(spu_dn, "vicinity", &lenp); for (i=0; i < (lenp / sizeof(phandle)); i++) { - if (vic_handles[i] == target->linux_phandle) + if (vic_handles[i] == target->phandle) return spu; } } @@ -499,7 +499,7 @@ static void init_affinity_node(int cbe) if (strcmp(name, "spe") == 0) { spu = devnode_spu(cbe, vic_dn); - avoid_ph = last_spu_dn->linux_phandle; + avoid_ph = last_spu_dn->phandle; } else { /* * "mic-tm" and "bif0" nodes do not have @@ -514,7 +514,7 @@ static void init_affinity_node(int cbe) last_spu->has_mem_affinity = 1; spu->has_mem_affinity = 1; } - avoid_ph = vic_dn->linux_phandle; + avoid_ph = vic_dn->phandle; } list_add_tail(&spu->aff_list, &last_spu->aff_list); diff --git a/arch/powerpc/platforms/pasemi/cpufreq.c b/arch/powerpc/platforms/pasemi/cpufreq.c index be2527a..d35e052 100644 --- a/arch/powerpc/platforms/pasemi/cpufreq.c +++ b/arch/powerpc/platforms/pasemi/cpufreq.c @@ -304,8 +304,8 @@ static struct cpufreq_driver pas_cpufreq_driver = { static int __init pas_cpufreq_init(void) { - if (!machine_is_compatible("PA6T-1682M") && - !machine_is_compatible("pasemi,pwrficient")) + if (!of_machine_is_compatible("PA6T-1682M") && + !of_machine_is_compatible("pasemi,pwrficient")) return -ENODEV; return cpufreq_register_driver(&pas_cpufreq_driver); diff --git a/arch/powerpc/platforms/powermac/cpufreq_32.c b/arch/powerpc/platforms/powermac/cpufreq_32.c index 08d94e4..d4f127d 100644 --- a/arch/powerpc/platforms/powermac/cpufreq_32.c +++ b/arch/powerpc/platforms/powermac/cpufreq_32.c @@ -657,31 +657,31 @@ static int __init pmac_cpufreq_setup(void) cur_freq = (*value) / 1000; /* Check for 7447A based MacRISC3 */ - if (machine_is_compatible("MacRISC3") && + if (of_machine_is_compatible("MacRISC3") && of_get_property(cpunode, "dynamic-power-step", NULL) && PVR_VER(mfspr(SPRN_PVR)) == 0x8003) { pmac_cpufreq_init_7447A(cpunode); /* Check for other MacRISC3 machines */ - } else if (machine_is_compatible("PowerBook3,4") || - machine_is_compatible("PowerBook3,5") || - machine_is_compatible("MacRISC3")) { + } else if (of_machine_is_compatible("PowerBook3,4") || + of_machine_is_compatible("PowerBook3,5") || + of_machine_is_compatible("MacRISC3")) { pmac_cpufreq_init_MacRISC3(cpunode); /* Else check for iBook2 500/600 */ - } else if (machine_is_compatible("PowerBook4,1")) { + } else if (of_machine_is_compatible("PowerBook4,1")) { hi_freq = cur_freq; low_freq = 400000; set_speed_proc = pmu_set_cpu_speed; is_pmu_based = 1; } /* Else check for TiPb 550 */ - else if (machine_is_compatible("PowerBook3,3") && cur_freq == 550000) { + else if (of_machine_is_compatible("PowerBook3,3") && cur_freq == 550000) { hi_freq = cur_freq; low_freq = 500000; set_speed_proc = pmu_set_cpu_speed; is_pmu_based = 1; } /* Else check for TiPb 400 & 500 */ - else if (machine_is_compatible("PowerBook3,2")) { + else if (of_machine_is_compatible("PowerBook3,2")) { /* We only know about the 400 MHz and the 500Mhz model * they both have 300 MHz as low frequency */ diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c index 708c751..3ed288e 100644 --- a/arch/powerpc/platforms/powermac/cpufreq_64.c +++ b/arch/powerpc/platforms/powermac/cpufreq_64.c @@ -398,11 +398,11 @@ static int __init g5_neo2_cpufreq_init(struct device_node *cpus) int rc = -ENODEV; /* Check supported platforms */ - if (machine_is_compatible("PowerMac8,1") || - machine_is_compatible("PowerMac8,2") || - machine_is_compatible("PowerMac9,1")) + if (of_machine_is_compatible("PowerMac8,1") || + of_machine_is_compatible("PowerMac8,2") || + of_machine_is_compatible("PowerMac9,1")) use_volts_smu = 1; - else if (machine_is_compatible("PowerMac11,2")) + else if (of_machine_is_compatible("PowerMac11,2")) use_volts_vdnap = 1; else return -ENODEV; @@ -729,9 +729,9 @@ static int __init g5_cpufreq_init(void) return -ENODEV; } - if (machine_is_compatible("PowerMac7,2") || - machine_is_compatible("PowerMac7,3") || - machine_is_compatible("RackMac3,1")) + if (of_machine_is_compatible("PowerMac7,2") || + of_machine_is_compatible("PowerMac7,3") || + of_machine_is_compatible("RackMac3,1")) rc = g5_pm72_cpufreq_init(cpus); #ifdef CONFIG_PMAC_SMU else diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c index 424b633..9e1b9fd 100644 --- a/arch/powerpc/platforms/powermac/feature.c +++ b/arch/powerpc/platforms/powermac/feature.c @@ -2426,7 +2426,7 @@ static int __init probe_motherboard(void) } } for(i=0; i<ARRAY_SIZE(pmac_mb_defs); i++) { - if (machine_is_compatible(pmac_mb_defs[i].model_string)) { + if (of_machine_is_compatible(pmac_mb_defs[i].model_string)) { pmac_mb = pmac_mb_defs[i]; goto found; } diff --git a/arch/powerpc/platforms/powermac/pfunc_core.c b/arch/powerpc/platforms/powermac/pfunc_core.c index 96d5ce5..ede49e7 100644 --- a/arch/powerpc/platforms/powermac/pfunc_core.c +++ b/arch/powerpc/platforms/powermac/pfunc_core.c @@ -842,7 +842,7 @@ struct pmf_function *__pmf_find_function(struct device_node *target, list_for_each_entry(func, &dev->functions, link) { if (name && strcmp(name, func->name)) continue; - if (func->phandle && target->node != func->phandle) + if (func->phandle && target->phandle != func->phandle) continue; if ((func->flags & flags) == 0) continue; diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c index b40c22d..6898e82 100644 --- a/arch/powerpc/platforms/powermac/smp.c +++ b/arch/powerpc/platforms/powermac/smp.c @@ -693,9 +693,9 @@ static void __init smp_core99_setup(int ncpus) #ifdef CONFIG_PPC64 /* i2c based HW sync on some G5s */ - if (machine_is_compatible("PowerMac7,2") || - machine_is_compatible("PowerMac7,3") || - machine_is_compatible("RackMac3,1")) + if (of_machine_is_compatible("PowerMac7,2") || + of_machine_is_compatible("PowerMac7,3") || + of_machine_is_compatible("RackMac3,1")) smp_core99_setup_i2c_hwsync(ncpus); /* pfunc based HW sync on recent G5s */ @@ -713,7 +713,7 @@ static void __init smp_core99_setup(int ncpus) #else /* CONFIG_PPC64 */ /* GPIO based HW sync on ppc32 Core99 */ - if (pmac_tb_freeze == NULL && !machine_is_compatible("MacRISC4")) { + if (pmac_tb_freeze == NULL && !of_machine_is_compatible("MacRISC4")) { struct device_node *cpu; const u32 *tbprop = NULL; @@ -750,7 +750,7 @@ static void __init smp_core99_setup(int ncpus) #endif /* 32 bits SMP can't NAP */ - if (!machine_is_compatible("MacRISC4")) + if (!of_machine_is_compatible("MacRISC4")) powersave_nap = 0; } @@ -852,7 +852,7 @@ static void __devinit smp_core99_setup_cpu(int cpu_nr) /* If we didn't start the second CPU, we must take * it off the bus */ - if (machine_is_compatible("MacRISC4") && + if (of_machine_is_compatible("MacRISC4") && num_online_cpus() < 2) g5_phy_disable_cpu1(); #endif /* CONFIG_PPC64 */ diff --git a/arch/powerpc/platforms/powermac/time.c b/arch/powerpc/platforms/powermac/time.c index 1810e42..48211ca 100644 --- a/arch/powerpc/platforms/powermac/time.c +++ b/arch/powerpc/platforms/powermac/time.c @@ -317,9 +317,9 @@ void __init pmac_calibrate_decr(void) * calibration. That's better since the VIA itself seems * to be slightly off. --BenH */ - if (!machine_is_compatible("MacRISC2") && - !machine_is_compatible("MacRISC3") && - !machine_is_compatible("MacRISC4")) + if (!of_machine_is_compatible("MacRISC2") && + !of_machine_is_compatible("MacRISC3") && + !of_machine_is_compatible("MacRISC4")) if (via_calibrate_decr()) return; @@ -328,7 +328,7 @@ void __init pmac_calibrate_decr(void) * probably implement calibration based on the KL timer on these * machines anyway... -BenH */ - if (machine_is_compatible("PowerMac3,5")) + if (of_machine_is_compatible("PowerMac3,5")) if (via_calibrate_decr()) return; #endif diff --git a/arch/powerpc/platforms/powermac/udbg_scc.c b/arch/powerpc/platforms/powermac/udbg_scc.c index 9490157..d83135a 100644 --- a/arch/powerpc/platforms/powermac/udbg_scc.c +++ b/arch/powerpc/platforms/powermac/udbg_scc.c @@ -132,9 +132,9 @@ void udbg_scc_init(int force_scc) scc_inittab[1] = in_8(sccc); out_8(sccc, 12); scc_inittab[3] = in_8(sccc); - } else if (machine_is_compatible("RackMac1,1") - || machine_is_compatible("RackMac1,2") - || machine_is_compatible("MacRISC4")) { + } else if (of_machine_is_compatible("RackMac1,1") + || of_machine_is_compatible("RackMac1,2") + || of_machine_is_compatible("MacRISC4")) { /* Xserves and G5s default to 57600 */ scc_inittab[1] = 0; scc_inittab[3] = 0; diff --git a/arch/powerpc/sysdev/grackle.c b/arch/powerpc/sysdev/grackle.c index 5da37c2..cf27df6 100644 --- a/arch/powerpc/sysdev/grackle.c +++ b/arch/powerpc/sysdev/grackle.c @@ -56,9 +56,9 @@ static inline void grackle_set_loop_snoop(struct pci_controller *bp, int enable) void __init setup_grackle(struct pci_controller *hose) { setup_indirect_pci(hose, 0xfec00000, 0xfee00000, 0); - if (machine_is_compatible("PowerMac1,1")) + if (of_machine_is_compatible("PowerMac1,1")) ppc_pci_add_flags(PPC_PCI_REASSIGN_ALL_BUS); - if (machine_is_compatible("AAPL,PowerBook1998")) + if (of_machine_is_compatible("AAPL,PowerBook1998")) grackle_set_loop_snoop(hose, 1); #if 0 /* Disabled for now, HW problems ??? */ grackle_set_stg(hose, 1); diff --git a/arch/sparc/include/asm/stat.h b/arch/sparc/include/asm/stat.h index 55db5ec..39327d6 100644 --- a/arch/sparc/include/asm/stat.h +++ b/arch/sparc/include/asm/stat.h @@ -53,8 +53,8 @@ struct stat { ino_t st_ino; mode_t st_mode; short st_nlink; - uid_t st_uid; - gid_t st_gid; + uid16_t st_uid; + gid16_t st_gid; unsigned short st_rdev; off_t st_size; time_t st_atime; diff --git a/arch/sparc/kernel/devices.c b/arch/sparc/kernel/devices.c index b171ae8..b062de9 100644 --- a/arch/sparc/kernel/devices.c +++ b/arch/sparc/kernel/devices.c @@ -59,7 +59,7 @@ static int __cpu_find_by(int (*compare)(int, int, void *), void *compare_arg, cur_inst = 0; for_each_node_by_type(dp, "cpu") { - int err = check_cpu_node(dp->node, &cur_inst, + int err = check_cpu_node(dp->phandle, &cur_inst, compare, compare_arg, prom_node, mid); if (!err) { diff --git a/arch/sparc/kernel/kstack.h b/arch/sparc/kernel/kstack.h index 4248d96..5247283 100644 --- a/arch/sparc/kernel/kstack.h +++ b/arch/sparc/kernel/kstack.h @@ -11,6 +11,10 @@ static inline bool kstack_valid(struct thread_info *tp, unsigned long sp) { unsigned long base = (unsigned long) tp; + /* Stack pointer must be 16-byte aligned. */ + if (sp & (16UL - 1)) + return false; + if (sp >= (base + sizeof(struct thread_info)) && sp <= (base + THREAD_SIZE - sizeof(struct sparc_stackf))) return true; diff --git a/arch/sparc/kernel/of_device_32.c b/arch/sparc/kernel/of_device_32.c index 4c26eb5..da527b3 100644 --- a/arch/sparc/kernel/of_device_32.c +++ b/arch/sparc/kernel/of_device_32.c @@ -105,7 +105,7 @@ static unsigned long of_bus_sbus_get_flags(const u32 *addr, unsigned long flags) static int of_bus_ambapp_match(struct device_node *np) { - return !strcmp(np->name, "ambapp"); + return !strcmp(np->type, "ambapp"); } static void of_bus_ambapp_count_cells(struct device_node *child, @@ -433,7 +433,7 @@ build_resources: if (!parent) dev_set_name(&op->dev, "root"); else - dev_set_name(&op->dev, "%08x", dp->node); + dev_set_name(&op->dev, "%08x", dp->phandle); if (of_device_register(op)) { printk("%s: Could not register of device.\n", diff --git a/arch/sparc/kernel/of_device_64.c b/arch/sparc/kernel/of_device_64.c index 0a6f2d1..b3d4cb5 100644 --- a/arch/sparc/kernel/of_device_64.c +++ b/arch/sparc/kernel/of_device_64.c @@ -676,7 +676,7 @@ static struct of_device * __init scan_one_device(struct device_node *dp, if (!parent) dev_set_name(&op->dev, "root"); else - dev_set_name(&op->dev, "%08x", dp->node); + dev_set_name(&op->dev, "%08x", dp->phandle); if (of_device_register(op)) { printk("%s: Could not register of device.\n", diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c index 539e83f..592b03d 100644 --- a/arch/sparc/kernel/pci.c +++ b/arch/sparc/kernel/pci.c @@ -247,6 +247,7 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm, struct pci_bus *bus, int devfn) { struct dev_archdata *sd; + struct pci_slot *slot; struct of_device *op; struct pci_dev *dev; const char *type; @@ -286,6 +287,11 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm, dev->dev.bus = &pci_bus_type; dev->devfn = devfn; dev->multifunction = 0; /* maybe a lie? */ + set_pcie_port_type(dev); + + list_for_each_entry(slot, &dev->bus->slots, list) + if (PCI_SLOT(dev->devfn) == slot->number) + dev->slot = slot; dev->vendor = of_getintprop_default(node, "vendor-id", 0xffff); dev->device = of_getintprop_default(node, "device-id", 0xffff); @@ -322,6 +328,7 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm, dev->current_state = 4; /* unknown power state */ dev->error_state = pci_channel_io_normal; + dev->dma_mask = 0xffffffff; if (!strcmp(node->name, "pci")) { /* a PCI-PCI bridge */ diff --git a/arch/sparc/kernel/prom.h b/arch/sparc/kernel/prom.h index 453397f..a8591ef 100644 --- a/arch/sparc/kernel/prom.h +++ b/arch/sparc/kernel/prom.h @@ -4,9 +4,6 @@ #include <linux/spinlock.h> #include <asm/prom.h> -extern struct device_node *allnodes; /* temporary while merging */ -extern rwlock_t devtree_lock; /* temporary while merging */ - extern void * prom_early_alloc(unsigned long size); extern void irq_trans_init(struct device_node *dp); diff --git a/arch/sparc/kernel/prom_common.c b/arch/sparc/kernel/prom_common.c index d80a65d..57ac9e2 100644 --- a/arch/sparc/kernel/prom_common.c +++ b/arch/sparc/kernel/prom_common.c @@ -37,18 +37,6 @@ EXPORT_SYMBOL(of_console_path); char *of_console_options; EXPORT_SYMBOL(of_console_options); -struct device_node *of_find_node_by_phandle(phandle handle) -{ - struct device_node *np; - - for (np = allnodes; np; np = np->allnext) - if (np->node == handle) - break; - - return np; -} -EXPORT_SYMBOL(of_find_node_by_phandle); - int of_getintprop_default(struct device_node *np, const char *name, int def) { struct property *prop; @@ -89,7 +77,7 @@ int of_set_property(struct device_node *dp, const char *name, void *val, int len void *old_val = prop->value; int ret; - ret = prom_setprop(dp->node, name, val, len); + ret = prom_setprop(dp->phandle, name, val, len); err = -EINVAL; if (ret >= 0) { @@ -236,7 +224,7 @@ static struct device_node * __init prom_create_node(phandle node, dp->name = get_one_property(node, "name"); dp->type = get_one_property(node, "device_type"); - dp->node = node; + dp->phandle = node; dp->properties = build_prop_list(node); @@ -313,7 +301,7 @@ void __init prom_build_devicetree(void) nextp = &allnodes->allnext; allnodes->child = prom_build_tree(allnodes, - prom_getchild(allnodes->node), + prom_getchild(allnodes->phandle), &nextp); of_console_init(); diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c index aa36223..eb14844 100644 --- a/arch/sparc/kernel/smp_64.c +++ b/arch/sparc/kernel/smp_64.c @@ -370,7 +370,7 @@ static int __cpuinit smp_boot_one_cpu(unsigned int cpu) } else { struct device_node *dp = of_find_node_by_cpuid(cpu); - prom_startcpu(dp->node, entry, cookie); + prom_startcpu(dp->phandle, entry, cookie); } for (timeout = 0; timeout < 50000; timeout++) { diff --git a/arch/sparc/kernel/tsb.S b/arch/sparc/kernel/tsb.S index 8c91d9b..db15d12 100644 --- a/arch/sparc/kernel/tsb.S +++ b/arch/sparc/kernel/tsb.S @@ -191,10 +191,12 @@ tsb_dtlb_load: tsb_itlb_load: /* Executable bit must be set. */ -661: andcc %g5, _PAGE_EXEC_4U, %g0 - .section .sun4v_1insn_patch, "ax" +661: sethi %hi(_PAGE_EXEC_4U), %g4 + andcc %g5, %g4, %g0 + .section .sun4v_2insn_patch, "ax" .word 661b andcc %g5, _PAGE_EXEC_4V, %g0 + nop .previous be,pn %xcc, tsb_do_fault diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h index fc801ba..b753ea5 100644 --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -450,6 +450,8 @@ struct thread_struct { struct perf_event *ptrace_bps[HBP_NUM]; /* Debug status used for traps, single steps, etc... */ unsigned long debugreg6; + /* Keep track of the exact dr7 value set by the user */ + unsigned long ptrace_dr7; /* Fault info: */ unsigned long cr2; unsigned long trap_no; diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 0acbcdf..af1c583 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -1344,14 +1344,6 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = { }, { .callback = force_acpi_ht, - .ident = "ASUS P2B-DS", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), - DMI_MATCH(DMI_BOARD_NAME, "P2B-DS"), - }, - }, - { - .callback = force_acpi_ht, .ident = "ASUS CUR-DLS", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), diff --git a/arch/x86/kernel/hw_breakpoint.c b/arch/x86/kernel/hw_breakpoint.c index 05d5fec..bb6006e 100644 --- a/arch/x86/kernel/hw_breakpoint.c +++ b/arch/x86/kernel/hw_breakpoint.c @@ -212,25 +212,6 @@ static int arch_check_va_in_kernelspace(unsigned long va, u8 hbp_len) return (va >= TASK_SIZE) && ((va + len - 1) >= TASK_SIZE); } -/* - * Store a breakpoint's encoded address, length, and type. - */ -static int arch_store_info(struct perf_event *bp) -{ - struct arch_hw_breakpoint *info = counter_arch_bp(bp); - /* - * For kernel-addresses, either the address or symbol name can be - * specified. - */ - if (info->name) - info->address = (unsigned long) - kallsyms_lookup_name(info->name); - if (info->address) - return 0; - - return -EINVAL; -} - int arch_bp_generic_fields(int x86_len, int x86_type, int *gen_len, int *gen_type) { @@ -362,10 +343,13 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp, return ret; } - ret = arch_store_info(bp); - - if (ret < 0) - return ret; + /* + * For kernel-addresses, either the address or symbol name can be + * specified. + */ + if (info->name) + info->address = (unsigned long) + kallsyms_lookup_name(info->name); /* * Check that the low-order bits of the address are appropriate * for the alignment implied by len. diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c index 017d937..0c1033d 100644 --- a/arch/x86/kernel/ptrace.c +++ b/arch/x86/kernel/ptrace.c @@ -702,7 +702,7 @@ static unsigned long ptrace_get_debugreg(struct task_struct *tsk, int n) } else if (n == 6) { val = thread->debugreg6; } else if (n == 7) { - val = ptrace_get_dr7(thread->ptrace_bps); + val = thread->ptrace_dr7; } return val; } @@ -778,8 +778,11 @@ int ptrace_set_debugreg(struct task_struct *tsk, int n, unsigned long val) return rc; } /* All that's left is DR7 */ - if (n == 7) + if (n == 7) { rc = ptrace_write_dr7(tsk, val); + if (!rc) + thread->ptrace_dr7 = val; + } ret_path: return rc; diff --git a/block/blk-core.c b/block/blk-core.c index 718897e..d1a9a0a 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -1147,7 +1147,7 @@ void init_request_from_bio(struct request *req, struct bio *bio) */ static inline bool queue_should_plug(struct request_queue *q) { - return !(blk_queue_nonrot(q) && blk_queue_queuing(q)); + return !(blk_queue_nonrot(q) && blk_queue_tagged(q)); } static int __make_request(struct request_queue *q, struct bio *bio) @@ -1859,15 +1859,8 @@ void blk_dequeue_request(struct request *rq) * and to it is freed is accounted as io that is in progress at * the driver side. */ - if (blk_account_rq(rq)) { + if (blk_account_rq(rq)) q->in_flight[rq_is_sync(rq)]++; - /* - * Mark this device as supporting hardware queuing, if - * we have more IOs in flight than 4. - */ - if (!blk_queue_queuing(q) && queue_in_flight(q) > 4) - set_bit(QUEUE_FLAG_CQ, &q->queue_flags); - } } /** diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c index bbc2c13..b2586f5 100644 --- a/drivers/acpi/dock.c +++ b/drivers/acpi/dock.c @@ -935,6 +935,7 @@ static int dock_add(acpi_handle handle) struct platform_device *dd; id = dock_station_count; + memset(&ds, 0, sizeof(ds)); dd = platform_device_register_data(NULL, "dock", id, &ds, sizeof(ds)); if (IS_ERR(dd)) return PTR_ERR(dd); diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 7c0441f..cc978a8 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -110,6 +110,14 @@ static struct dmi_system_id __cpuinitdata processor_power_dmi_table[] = { DMI_MATCH(DMI_BIOS_VENDOR,"Phoenix Technologies LTD"), DMI_MATCH(DMI_BIOS_VERSION,"SHE845M0.86C.0013.D.0302131307")}, (void *)2}, + { set_max_cstate, "Pavilion zv5000", { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME,"Pavilion zv5000 (DS502A#ABA)")}, + (void *)1}, + { set_max_cstate, "Asus L8400B", { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), + DMI_MATCH(DMI_PRODUCT_NAME,"L8400B series Notebook PC")}, + (void *)1}, {}, }; @@ -872,12 +880,14 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev, return(acpi_idle_enter_c1(dev, state)); local_irq_disable(); - current_thread_info()->status &= ~TS_POLLING; - /* - * TS_POLLING-cleared state must be visible before we test - * NEED_RESCHED: - */ - smp_mb(); + if (cx->entry_method != ACPI_CSTATE_FFH) { + current_thread_info()->status &= ~TS_POLLING; + /* + * TS_POLLING-cleared state must be visible before we test + * NEED_RESCHED: + */ + smp_mb(); + } if (unlikely(need_resched())) { current_thread_info()->status |= TS_POLLING; @@ -957,12 +967,14 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, } local_irq_disable(); - current_thread_info()->status &= ~TS_POLLING; - /* - * TS_POLLING-cleared state must be visible before we test - * NEED_RESCHED: - */ - smp_mb(); + if (cx->entry_method != ACPI_CSTATE_FFH) { + current_thread_info()->status &= ~TS_POLLING; + /* + * TS_POLLING-cleared state must be visible before we test + * NEED_RESCHED: + */ + smp_mb(); + } if (unlikely(need_resched())) { current_thread_info()->status |= TS_POLLING; diff --git a/drivers/acpi/processor_pdc.c b/drivers/acpi/processor_pdc.c index 7247819..e306ba9 100644 --- a/drivers/acpi/processor_pdc.c +++ b/drivers/acpi/processor_pdc.c @@ -125,6 +125,8 @@ acpi_processor_eval_pdc(acpi_handle handle, struct acpi_object_list *pdc_in) return status; } +static int early_pdc_done; + void acpi_processor_set_pdc(acpi_handle handle) { struct acpi_object_list *obj_list; @@ -132,6 +134,9 @@ void acpi_processor_set_pdc(acpi_handle handle) if (arch_has_acpi_pdc() == false) return; + if (early_pdc_done) + return; + obj_list = acpi_processor_alloc_pdc(); if (!obj_list) return; @@ -151,6 +156,13 @@ static int set_early_pdc_optin(const struct dmi_system_id *id) return 0; } +static int param_early_pdc_optin(char *s) +{ + early_pdc_optin = 1; + return 1; +} +__setup("acpi_early_pdc_eval", param_early_pdc_optin); + static struct dmi_system_id __cpuinitdata early_pdc_optin_table[] = { { set_early_pdc_optin, "HP Envy", { @@ -192,4 +204,6 @@ void __init acpi_early_processor_set_pdc(void) acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX, early_init_pdc, NULL, NULL, NULL); + + early_pdc_done = 1; } diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c index 2cabadc..a959f6a 100644 --- a/drivers/acpi/processor_perflib.c +++ b/drivers/acpi/processor_perflib.c @@ -413,7 +413,11 @@ static int acpi_processor_get_performance_info(struct acpi_processor *pr) if (result) goto update_bios; - return 0; + /* We need to call _PPC once when cpufreq starts */ + if (ignore_ppc != 1) + result = acpi_processor_get_platform_limit(pr); + + return result; /* * Having _PPC but missing frequencies (_PSS, _PCT) is a very good hint that diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index ff9f622..3e00967 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -1336,9 +1336,25 @@ static int acpi_bus_scan(acpi_handle handle, struct acpi_bus_ops *ops, if (child) *child = device; - return 0; + + if (device) + return 0; + else + return -ENODEV; } +/* + * acpi_bus_add and acpi_bus_start + * + * scan a given ACPI tree and (probably recently hot-plugged) + * create and add or starts found devices. + * + * If no devices were found -ENODEV is returned which does not + * mean that this is a real error, there just have been no suitable + * ACPI objects in the table trunk from which the kernel could create + * a device and add/start an appropriate driver. + */ + int acpi_bus_add(struct acpi_device **child, struct acpi_device *parent, acpi_handle handle, int type) @@ -1348,8 +1364,7 @@ acpi_bus_add(struct acpi_device **child, memset(&ops, 0, sizeof(ops)); ops.acpi_op_add = 1; - acpi_bus_scan(handle, &ops, child); - return 0; + return acpi_bus_scan(handle, &ops, child); } EXPORT_SYMBOL(acpi_bus_add); @@ -1357,11 +1372,13 @@ int acpi_bus_start(struct acpi_device *device) { struct acpi_bus_ops ops; + if (!device) + return -EINVAL; + memset(&ops, 0, sizeof(ops)); ops.acpi_op_start = 1; - acpi_bus_scan(device->handle, &ops, NULL); - return 0; + return acpi_bus_scan(device->handle, &ops, NULL); } EXPORT_SYMBOL(acpi_bus_start); diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c index f336bca7..8a0ed28 100644 --- a/drivers/acpi/tables.c +++ b/drivers/acpi/tables.c @@ -213,7 +213,7 @@ acpi_table_parse_entries(char *id, unsigned long table_end; acpi_size tbl_size; - if (acpi_disabled) + if (acpi_disabled && !acpi_ht) return -ENODEV; if (!handler) @@ -280,7 +280,7 @@ int __init acpi_table_parse(char *id, acpi_table_handler handler) struct acpi_table_header *table = NULL; acpi_size tbl_size; - if (acpi_disabled) + if (acpi_disabled && !acpi_ht) return -ENODEV; if (!handler) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index b343903..a6a736a 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -3082,8 +3082,16 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) ahci_save_initial_config(pdev, hpriv); /* prepare host */ - if (hpriv->cap & HOST_CAP_NCQ) - pi.flags |= ATA_FLAG_NCQ | ATA_FLAG_FPDMA_AA; + if (hpriv->cap & HOST_CAP_NCQ) { + pi.flags |= ATA_FLAG_NCQ; + /* Auto-activate optimization is supposed to be supported on + all AHCI controllers indicating NCQ support, but it seems + to be broken at least on some NVIDIA MCP79 chipsets. + Until we get info on which NVIDIA chipsets don't have this + issue, if any, disable AA on all NVIDIA AHCIs. */ + if (pdev->vendor != PCI_VENDOR_ID_NVIDIA) + pi.flags |= ATA_FLAG_FPDMA_AA; + } if (hpriv->cap & HOST_CAP_PMP) pi.flags |= ATA_FLAG_PMP; diff --git a/drivers/base/class.c b/drivers/base/class.c index 161746d..6e2c3b0 100644 --- a/drivers/base/class.c +++ b/drivers/base/class.c @@ -59,6 +59,8 @@ static void class_release(struct kobject *kobj) else pr_debug("class '%s' does not have a release() function, " "be careful\n", class->name); + + kfree(cp); } static struct sysfs_ops class_sysfs_ops = { diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index 51042f0ba7..7eff828 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -243,10 +243,12 @@ static int index_to_minor(int index) static int __devinit virtblk_probe(struct virtio_device *vdev) { struct virtio_blk *vblk; + struct request_queue *q; int err; u64 cap; - u32 v; - u32 blk_size, sg_elems; + u32 v, blk_size, sg_elems, opt_io_size; + u16 min_io_size; + u8 physical_block_exp, alignment_offset; if (index_to_minor(index) >= 1 << MINORBITS) return -ENOSPC; @@ -293,13 +295,13 @@ static int __devinit virtblk_probe(struct virtio_device *vdev) goto out_mempool; } - vblk->disk->queue = blk_init_queue(do_virtblk_request, &vblk->lock); - if (!vblk->disk->queue) { + q = vblk->disk->queue = blk_init_queue(do_virtblk_request, &vblk->lock); + if (!q) { err = -ENOMEM; goto out_put_disk; } - vblk->disk->queue->queuedata = vblk; + q->queuedata = vblk; if (index < 26) { sprintf(vblk->disk->disk_name, "vd%c", 'a' + index % 26); @@ -323,10 +325,10 @@ static int __devinit virtblk_probe(struct virtio_device *vdev) /* If barriers are supported, tell block layer that queue is ordered */ if (virtio_has_feature(vdev, VIRTIO_BLK_F_FLUSH)) - blk_queue_ordered(vblk->disk->queue, QUEUE_ORDERED_DRAIN_FLUSH, + blk_queue_ordered(q, QUEUE_ORDERED_DRAIN_FLUSH, virtblk_prepare_flush); else if (virtio_has_feature(vdev, VIRTIO_BLK_F_BARRIER)) - blk_queue_ordered(vblk->disk->queue, QUEUE_ORDERED_TAG, NULL); + blk_queue_ordered(q, QUEUE_ORDERED_TAG, NULL); /* If disk is read-only in the host, the guest should obey */ if (virtio_has_feature(vdev, VIRTIO_BLK_F_RO)) @@ -345,14 +347,14 @@ static int __devinit virtblk_probe(struct virtio_device *vdev) set_capacity(vblk->disk, cap); /* We can handle whatever the host told us to handle. */ - blk_queue_max_phys_segments(vblk->disk->queue, vblk->sg_elems-2); - blk_queue_max_hw_segments(vblk->disk->queue, vblk->sg_elems-2); + blk_queue_max_phys_segments(q, vblk->sg_elems-2); + blk_queue_max_hw_segments(q, vblk->sg_elems-2); /* No need to bounce any requests */ - blk_queue_bounce_limit(vblk->disk->queue, BLK_BOUNCE_ANY); + blk_queue_bounce_limit(q, BLK_BOUNCE_ANY); /* No real sector limit. */ - blk_queue_max_sectors(vblk->disk->queue, -1U); + blk_queue_max_sectors(q, -1U); /* Host can optionally specify maximum segment size and number of * segments. */ @@ -360,16 +362,45 @@ static int __devinit virtblk_probe(struct virtio_device *vdev) offsetof(struct virtio_blk_config, size_max), &v); if (!err) - blk_queue_max_segment_size(vblk->disk->queue, v); + blk_queue_max_segment_size(q, v); else - blk_queue_max_segment_size(vblk->disk->queue, -1U); + blk_queue_max_segment_size(q, -1U); /* Host can optionally specify the block size of the device */ err = virtio_config_val(vdev, VIRTIO_BLK_F_BLK_SIZE, offsetof(struct virtio_blk_config, blk_size), &blk_size); if (!err) - blk_queue_logical_block_size(vblk->disk->queue, blk_size); + blk_queue_logical_block_size(q, blk_size); + else + blk_size = queue_logical_block_size(q); + + /* Use topology information if available */ + err = virtio_config_val(vdev, VIRTIO_BLK_F_TOPOLOGY, + offsetof(struct virtio_blk_config, physical_block_exp), + &physical_block_exp); + if (!err && physical_block_exp) + blk_queue_physical_block_size(q, + blk_size * (1 << physical_block_exp)); + + err = virtio_config_val(vdev, VIRTIO_BLK_F_TOPOLOGY, + offsetof(struct virtio_blk_config, alignment_offset), + &alignment_offset); + if (!err && alignment_offset) + blk_queue_alignment_offset(q, blk_size * alignment_offset); + + err = virtio_config_val(vdev, VIRTIO_BLK_F_TOPOLOGY, + offsetof(struct virtio_blk_config, min_io_size), + &min_io_size); + if (!err && min_io_size) + blk_queue_io_min(q, blk_size * min_io_size); + + err = virtio_config_val(vdev, VIRTIO_BLK_F_TOPOLOGY, + offsetof(struct virtio_blk_config, opt_io_size), + &opt_io_size); + if (!err && opt_io_size) + blk_queue_io_opt(q, blk_size * opt_io_size); + add_disk(vblk->disk); return 0; @@ -412,7 +443,7 @@ static struct virtio_device_id id_table[] = { static unsigned int features[] = { VIRTIO_BLK_F_BARRIER, VIRTIO_BLK_F_SEG_MAX, VIRTIO_BLK_F_SIZE_MAX, VIRTIO_BLK_F_GEOMETRY, VIRTIO_BLK_F_RO, VIRTIO_BLK_F_BLK_SIZE, - VIRTIO_BLK_F_SCSI, VIRTIO_BLK_F_FLUSH + VIRTIO_BLK_F_SCSI, VIRTIO_BLK_F_FLUSH, VIRTIO_BLK_F_TOPOLOGY }; /* diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index e023682..3141dd3 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -666,6 +666,14 @@ config VIRTIO_CONSOLE help Virtio console for use with lguest and other hypervisors. + Also serves as a general-purpose serial device for data + transfer between the guest and host. Character devices at + /dev/vportNpn will be created when corresponding ports are + found, where N is the device number and n is the port number + within that device. If specified by the host, a sysfs + attribute called 'name' will be populated with a name for + the port which can be used by udev scripts to create a + symlink to the device. config HVCS tristate "IBM Hypervisor Virtual Console Server support" diff --git a/drivers/char/hvc_beat.c b/drivers/char/hvc_beat.c index 6913fc3..5fe4631 100644 --- a/drivers/char/hvc_beat.c +++ b/drivers/char/hvc_beat.c @@ -99,7 +99,7 @@ static int hvc_beat_config(char *p) static int __init hvc_beat_console_init(void) { - if (hvc_beat_useit && machine_is_compatible("Beat")) { + if (hvc_beat_useit && of_machine_is_compatible("Beat")) { hvc_instantiate(0, 0, &hvc_beat_get_put_ops); } return 0; diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c index a035ae3..213373b 100644 --- a/drivers/char/virtio_console.c +++ b/drivers/char/virtio_console.c @@ -1,18 +1,6 @@ -/*D:300 - * The Guest console driver - * - * Writing console drivers is one of the few remaining Dark Arts in Linux. - * Fortunately for us, the path of virtual consoles has been well-trodden by - * the PowerPC folks, who wrote "hvc_console.c" to generically support any - * virtual console. We use that infrastructure which only requires us to write - * the basic put_chars and get_chars functions and call the right register - * functions. - :*/ - -/*M:002 The console can be flooded: while the Guest is processing input the - * Host can send more. Buffering in the Host could alleviate this, but it is a - * difficult problem in general. :*/ -/* Copyright (C) 2006, 2007 Rusty Russell, IBM Corporation +/* + * Copyright (C) 2006, 2007, 2009 Rusty Russell, IBM Corporation + * Copyright (C) 2009, 2010 Red Hat, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -28,142 +16,694 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include <linux/cdev.h> +#include <linux/debugfs.h> +#include <linux/device.h> #include <linux/err.h> +#include <linux/fs.h> #include <linux/init.h> +#include <linux/list.h> +#include <linux/poll.h> +#include <linux/sched.h> +#include <linux/spinlock.h> #include <linux/virtio.h> #include <linux/virtio_console.h> +#include <linux/wait.h> +#include <linux/workqueue.h> #include "hvc_console.h" -/*D:340 These represent our input and output console queues, and the virtio - * operations for them. */ -static struct virtqueue *in_vq, *out_vq; -static struct virtio_device *vdev; +/* + * This is a global struct for storing common data for all the devices + * this driver handles. + * + * Mainly, it has a linked list for all the consoles in one place so + * that callbacks from hvc for get_chars(), put_chars() work properly + * across multiple devices and multiple ports per device. + */ +struct ports_driver_data { + /* Used for registering chardevs */ + struct class *class; + + /* Used for exporting per-port information to debugfs */ + struct dentry *debugfs_dir; + + /* Number of devices this driver is handling */ + unsigned int index; + + /* + * This is used to keep track of the number of hvc consoles + * spawned by this driver. This number is given as the first + * argument to hvc_alloc(). To correctly map an initial + * console spawned via hvc_instantiate to the console being + * hooked up via hvc_alloc, we need to pass the same vtermno. + * + * We also just assume the first console being initialised was + * the first one that got used as the initial console. + */ + unsigned int next_vtermno; + + /* All the console devices handled by this driver */ + struct list_head consoles; +}; +static struct ports_driver_data pdrvdata; + +DEFINE_SPINLOCK(pdrvdata_lock); + +/* This struct holds information that's relevant only for console ports */ +struct console { + /* We'll place all consoles in a list in the pdrvdata struct */ + struct list_head list; + + /* The hvc device associated with this console port */ + struct hvc_struct *hvc; + + /* + * This number identifies the number that we used to register + * with hvc in hvc_instantiate() and hvc_alloc(); this is the + * number passed on by the hvc callbacks to us to + * differentiate between the other console ports handled by + * this driver + */ + u32 vtermno; +}; + +struct port_buffer { + char *buf; + + /* size of the buffer in *buf above */ + size_t size; + + /* used length of the buffer */ + size_t len; + /* offset in the buf from which to consume data */ + size_t offset; +}; + +/* + * This is a per-device struct that stores data common to all the + * ports for that device (vdev->priv). + */ +struct ports_device { + /* + * Workqueue handlers where we process deferred work after + * notification + */ + struct work_struct control_work; + struct work_struct config_work; + + struct list_head ports; + + /* To protect the list of ports */ + spinlock_t ports_lock; + + /* To protect the vq operations for the control channel */ + spinlock_t cvq_lock; + + /* The current config space is stored here */ + struct virtio_console_config config; + + /* The virtio device we're associated with */ + struct virtio_device *vdev; + + /* + * A couple of virtqueues for the control channel: one for + * guest->host transfers, one for host->guest transfers + */ + struct virtqueue *c_ivq, *c_ovq; + + /* Array of per-port IO virtqueues */ + struct virtqueue **in_vqs, **out_vqs; + + /* Used for numbering devices for sysfs and debugfs */ + unsigned int drv_index; + + /* Major number for this device. Ports will be created as minors. */ + int chr_major; +}; + +/* This struct holds the per-port data */ +struct port { + /* Next port in the list, head is in the ports_device */ + struct list_head list; + + /* Pointer to the parent virtio_console device */ + struct ports_device *portdev; + + /* The current buffer from which data has to be fed to readers */ + struct port_buffer *inbuf; + + /* + * To protect the operations on the in_vq associated with this + * port. Has to be a spinlock because it can be called from + * interrupt context (get_char()). + */ + spinlock_t inbuf_lock; + + /* The IO vqs for this port */ + struct virtqueue *in_vq, *out_vq; + + /* File in the debugfs directory that exposes this port's information */ + struct dentry *debugfs_file; + + /* + * The entries in this struct will be valid if this port is + * hooked up to an hvc console + */ + struct console cons; + + /* Each port associates with a separate char device */ + struct cdev cdev; + struct device *dev; + + /* A waitqueue for poll() or blocking read operations */ + wait_queue_head_t waitqueue; + + /* The 'name' of the port that we expose via sysfs properties */ + char *name; + + /* The 'id' to identify the port with the Host */ + u32 id; + + /* Is the host device open */ + bool host_connected; + + /* We should allow only one process to open a port */ + bool guest_connected; +}; + +/* This is the very early arch-specified put chars function. */ +static int (*early_put_chars)(u32, const char *, int); + +static struct port *find_port_by_vtermno(u32 vtermno) +{ + struct port *port; + struct console *cons; + unsigned long flags; + + spin_lock_irqsave(&pdrvdata_lock, flags); + list_for_each_entry(cons, &pdrvdata.consoles, list) { + if (cons->vtermno == vtermno) { + port = container_of(cons, struct port, cons); + goto out; + } + } + port = NULL; +out: + spin_unlock_irqrestore(&pdrvdata_lock, flags); + return port; +} + +static struct port *find_port_by_id(struct ports_device *portdev, u32 id) +{ + struct port *port; + unsigned long flags; + + spin_lock_irqsave(&portdev->ports_lock, flags); + list_for_each_entry(port, &portdev->ports, list) + if (port->id == id) + goto out; + port = NULL; +out: + spin_unlock_irqrestore(&portdev->ports_lock, flags); + + return port; +} + +static struct port *find_port_by_vq(struct ports_device *portdev, + struct virtqueue *vq) +{ + struct port *port; + unsigned long flags; + + spin_lock_irqsave(&portdev->ports_lock, flags); + list_for_each_entry(port, &portdev->ports, list) + if (port->in_vq == vq || port->out_vq == vq) + goto out; + port = NULL; +out: + spin_unlock_irqrestore(&portdev->ports_lock, flags); + return port; +} + +static bool is_console_port(struct port *port) +{ + if (port->cons.hvc) + return true; + return false; +} + +static inline bool use_multiport(struct ports_device *portdev) +{ + /* + * This condition can be true when put_chars is called from + * early_init + */ + if (!portdev->vdev) + return 0; + return portdev->vdev->features[0] & (1 << VIRTIO_CONSOLE_F_MULTIPORT); +} -/* This is our input buffer, and how much data is left in it. */ -static unsigned int in_len; -static char *in, *inbuf; +static void free_buf(struct port_buffer *buf) +{ + kfree(buf->buf); + kfree(buf); +} + +static struct port_buffer *alloc_buf(size_t buf_size) +{ + struct port_buffer *buf; -/* The operations for our console. */ -static struct hv_ops virtio_cons; + buf = kmalloc(sizeof(*buf), GFP_KERNEL); + if (!buf) + goto fail; + buf->buf = kzalloc(buf_size, GFP_KERNEL); + if (!buf->buf) + goto free_buf; + buf->len = 0; + buf->offset = 0; + buf->size = buf_size; + return buf; + +free_buf: + kfree(buf); +fail: + return NULL; +} + +/* Callers should take appropriate locks */ +static void *get_inbuf(struct port *port) +{ + struct port_buffer *buf; + struct virtqueue *vq; + unsigned int len; -/* The hvc device */ -static struct hvc_struct *hvc; + vq = port->in_vq; + buf = vq->vq_ops->get_buf(vq, &len); + if (buf) { + buf->len = len; + buf->offset = 0; + } + return buf; +} -/*D:310 The put_chars() callback is pretty straightforward. +/* + * Create a scatter-gather list representing our input buffer and put + * it in the queue. * - * We turn the characters into a scatter-gather list, add it to the output - * queue and then kick the Host. Then we sit here waiting for it to finish: - * inefficient in theory, but in practice implementations will do it - * immediately (lguest's Launcher does). */ -static int put_chars(u32 vtermno, const char *buf, int count) + * Callers should take appropriate locks. + */ +static int add_inbuf(struct virtqueue *vq, struct port_buffer *buf) { struct scatterlist sg[1]; + int ret; + + sg_init_one(sg, buf->buf, buf->size); + + ret = vq->vq_ops->add_buf(vq, sg, 0, 1, buf); + vq->vq_ops->kick(vq); + return ret; +} + +/* Discard any unread data this port has. Callers lockers. */ +static void discard_port_data(struct port *port) +{ + struct port_buffer *buf; + struct virtqueue *vq; unsigned int len; + int ret; - /* This is a convenient routine to initialize a single-elem sg list */ - sg_init_one(sg, buf, count); + vq = port->in_vq; + if (port->inbuf) + buf = port->inbuf; + else + buf = vq->vq_ops->get_buf(vq, &len); - /* add_buf wants a token to identify this buffer: we hand it any - * non-NULL pointer, since there's only ever one buffer. */ - if (out_vq->vq_ops->add_buf(out_vq, sg, 1, 0, (void *)1) >= 0) { - /* Tell Host to go! */ - out_vq->vq_ops->kick(out_vq); - /* Chill out until it's done with the buffer. */ - while (!out_vq->vq_ops->get_buf(out_vq, &len)) - cpu_relax(); + ret = 0; + while (buf) { + if (add_inbuf(vq, buf) < 0) { + ret++; + free_buf(buf); + } + buf = vq->vq_ops->get_buf(vq, &len); } + port->inbuf = NULL; + if (ret) + dev_warn(port->dev, "Errors adding %d buffers back to vq\n", + ret); +} - /* We're expected to return the amount of data we wrote: all of it. */ - return count; +static bool port_has_data(struct port *port) +{ + unsigned long flags; + bool ret; + + spin_lock_irqsave(&port->inbuf_lock, flags); + if (port->inbuf) { + ret = true; + goto out; + } + port->inbuf = get_inbuf(port); + if (port->inbuf) { + ret = true; + goto out; + } + ret = false; +out: + spin_unlock_irqrestore(&port->inbuf_lock, flags); + return ret; } -/* Create a scatter-gather list representing our input buffer and put it in the - * queue. */ -static void add_inbuf(void) +static ssize_t send_control_msg(struct port *port, unsigned int event, + unsigned int value) { struct scatterlist sg[1]; - sg_init_one(sg, inbuf, PAGE_SIZE); + struct virtio_console_control cpkt; + struct virtqueue *vq; + int len; + + if (!use_multiport(port->portdev)) + return 0; + + cpkt.id = port->id; + cpkt.event = event; + cpkt.value = value; + + vq = port->portdev->c_ovq; - /* We should always be able to add one buffer to an empty queue. */ - if (in_vq->vq_ops->add_buf(in_vq, sg, 0, 1, inbuf) < 0) - BUG(); - in_vq->vq_ops->kick(in_vq); + sg_init_one(sg, &cpkt, sizeof(cpkt)); + if (vq->vq_ops->add_buf(vq, sg, 1, 0, &cpkt) >= 0) { + vq->vq_ops->kick(vq); + while (!vq->vq_ops->get_buf(vq, &len)) + cpu_relax(); + } + return 0; } -/*D:350 get_chars() is the callback from the hvc_console infrastructure when - * an interrupt is received. - * - * Most of the code deals with the fact that the hvc_console() infrastructure - * only asks us for 16 bytes at a time. We keep in_offset and in_used fields - * for partially-filled buffers. */ -static int get_chars(u32 vtermno, char *buf, int count) +static ssize_t send_buf(struct port *port, void *in_buf, size_t in_count) { - /* If we don't have an input queue yet, we can't get input. */ - BUG_ON(!in_vq); + struct scatterlist sg[1]; + struct virtqueue *out_vq; + ssize_t ret; + unsigned int len; + + out_vq = port->out_vq; + + sg_init_one(sg, in_buf, in_count); + ret = out_vq->vq_ops->add_buf(out_vq, sg, 1, 0, in_buf); + + /* Tell Host to go! */ + out_vq->vq_ops->kick(out_vq); + + if (ret < 0) { + len = 0; + goto fail; + } + + /* + * Wait till the host acknowledges it pushed out the data we + * sent. Also ensure we return to userspace the number of + * bytes that were successfully consumed by the host. + */ + while (!out_vq->vq_ops->get_buf(out_vq, &len)) + cpu_relax(); +fail: + /* We're expected to return the amount of data we wrote */ + return len; +} + +/* + * Give out the data that's requested from the buffer that we have + * queued up. + */ +static ssize_t fill_readbuf(struct port *port, char *out_buf, size_t out_count, + bool to_user) +{ + struct port_buffer *buf; + unsigned long flags; + + if (!out_count || !port_has_data(port)) + return 0; + + buf = port->inbuf; + out_count = min(out_count, buf->len - buf->offset); + + if (to_user) { + ssize_t ret; + + ret = copy_to_user(out_buf, buf->buf + buf->offset, out_count); + if (ret) + return -EFAULT; + } else { + memcpy(out_buf, buf->buf + buf->offset, out_count); + } + + buf->offset += out_count; + + if (buf->offset == buf->len) { + /* + * We're done using all the data in this buffer. + * Re-queue so that the Host can send us more data. + */ + spin_lock_irqsave(&port->inbuf_lock, flags); + port->inbuf = NULL; + + if (add_inbuf(port->in_vq, buf) < 0) + dev_warn(port->dev, "failed add_buf\n"); + + spin_unlock_irqrestore(&port->inbuf_lock, flags); + } + /* Return the number of bytes actually copied */ + return out_count; +} - /* No buffer? Try to get one. */ - if (!in_len) { - in = in_vq->vq_ops->get_buf(in_vq, &in_len); - if (!in) +/* The condition that must be true for polling to end */ +static bool wait_is_over(struct port *port) +{ + return port_has_data(port) || !port->host_connected; +} + +static ssize_t port_fops_read(struct file *filp, char __user *ubuf, + size_t count, loff_t *offp) +{ + struct port *port; + ssize_t ret; + + port = filp->private_data; + + if (!port_has_data(port)) { + /* + * If nothing's connected on the host just return 0 in + * case of list_empty; this tells the userspace app + * that there's no connection + */ + if (!port->host_connected) return 0; + if (filp->f_flags & O_NONBLOCK) + return -EAGAIN; + + ret = wait_event_interruptible(port->waitqueue, + wait_is_over(port)); + if (ret < 0) + return ret; + } + /* + * We could've received a disconnection message while we were + * waiting for more data. + * + * This check is not clubbed in the if() statement above as we + * might receive some data as well as the host could get + * disconnected after we got woken up from our wait. So we + * really want to give off whatever data we have and only then + * check for host_connected. + */ + if (!port_has_data(port) && !port->host_connected) + return 0; + + return fill_readbuf(port, ubuf, count, true); +} + +static ssize_t port_fops_write(struct file *filp, const char __user *ubuf, + size_t count, loff_t *offp) +{ + struct port *port; + char *buf; + ssize_t ret; + + port = filp->private_data; + + count = min((size_t)(32 * 1024), count); + + buf = kmalloc(count, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + ret = copy_from_user(buf, ubuf, count); + if (ret) { + ret = -EFAULT; + goto free_buf; } - /* You want more than we have to give? Well, try wanting less! */ - if (in_len < count) - count = in_len; + ret = send_buf(port, buf, count); +free_buf: + kfree(buf); + return ret; +} + +static unsigned int port_fops_poll(struct file *filp, poll_table *wait) +{ + struct port *port; + unsigned int ret; + + port = filp->private_data; + poll_wait(filp, &port->waitqueue, wait); + + ret = 0; + if (port->inbuf) + ret |= POLLIN | POLLRDNORM; + if (port->host_connected) + ret |= POLLOUT; + if (!port->host_connected) + ret |= POLLHUP; + + return ret; +} + +static int port_fops_release(struct inode *inode, struct file *filp) +{ + struct port *port; + + port = filp->private_data; + + /* Notify host of port being closed */ + send_control_msg(port, VIRTIO_CONSOLE_PORT_OPEN, 0); + + spin_lock_irq(&port->inbuf_lock); + port->guest_connected = false; + + discard_port_data(port); + + spin_unlock_irq(&port->inbuf_lock); + + return 0; +} + +static int port_fops_open(struct inode *inode, struct file *filp) +{ + struct cdev *cdev = inode->i_cdev; + struct port *port; + + port = container_of(cdev, struct port, cdev); + filp->private_data = port; + + /* + * Don't allow opening of console port devices -- that's done + * via /dev/hvc + */ + if (is_console_port(port)) + return -ENXIO; + + /* Allow only one process to open a particular port at a time */ + spin_lock_irq(&port->inbuf_lock); + if (port->guest_connected) { + spin_unlock_irq(&port->inbuf_lock); + return -EMFILE; + } - /* Copy across to their buffer and increment offset. */ - memcpy(buf, in, count); - in += count; - in_len -= count; + port->guest_connected = true; + spin_unlock_irq(&port->inbuf_lock); - /* Finished? Re-register buffer so Host will use it again. */ - if (in_len == 0) - add_inbuf(); + /* Notify host of port being opened */ + send_control_msg(filp->private_data, VIRTIO_CONSOLE_PORT_OPEN, 1); - return count; + return 0; } -/*:*/ -/*D:320 Console drivers are initialized very early so boot messages can go out, - * so we do things slightly differently from the generic virtio initialization - * of the net and block drivers. +/* + * The file operations that we support: programs in the guest can open + * a console device, read from it, write to it, poll for data and + * close it. The devices are at + * /dev/vport<device number>p<port number> + */ +static const struct file_operations port_fops = { + .owner = THIS_MODULE, + .open = port_fops_open, + .read = port_fops_read, + .write = port_fops_write, + .poll = port_fops_poll, + .release = port_fops_release, +}; + +/* + * The put_chars() callback is pretty straightforward. * - * At this stage, the console is output-only. It's too early to set up a - * virtqueue, so we let the drivers do some boutique early-output thing. */ -int __init virtio_cons_early_init(int (*put_chars)(u32, const char *, int)) + * We turn the characters into a scatter-gather list, add it to the + * output queue and then kick the Host. Then we sit here waiting for + * it to finish: inefficient in theory, but in practice + * implementations will do it immediately (lguest's Launcher does). + */ +static int put_chars(u32 vtermno, const char *buf, int count) { - virtio_cons.put_chars = put_chars; - return hvc_instantiate(0, 0, &virtio_cons); + struct port *port; + + port = find_port_by_vtermno(vtermno); + if (!port) + return 0; + + if (unlikely(early_put_chars)) + return early_put_chars(vtermno, buf, count); + + return send_buf(port, (void *)buf, count); } /* - * virtio console configuration. This supports: - * - console resize + * get_chars() is the callback from the hvc_console infrastructure + * when an interrupt is received. + * + * We call out to fill_readbuf that gets us the required data from the + * buffers that are queued up. */ -static void virtcons_apply_config(struct virtio_device *dev) +static int get_chars(u32 vtermno, char *buf, int count) { + struct port *port; + + port = find_port_by_vtermno(vtermno); + if (!port) + return 0; + + /* If we don't have an input queue yet, we can't get input. */ + BUG_ON(!port->in_vq); + + return fill_readbuf(port, buf, count, false); +} + +static void resize_console(struct port *port) +{ + struct virtio_device *vdev; struct winsize ws; - if (virtio_has_feature(dev, VIRTIO_CONSOLE_F_SIZE)) { - dev->config->get(dev, - offsetof(struct virtio_console_config, cols), - &ws.ws_col, sizeof(u16)); - dev->config->get(dev, - offsetof(struct virtio_console_config, rows), - &ws.ws_row, sizeof(u16)); - hvc_resize(hvc, ws); + vdev = port->portdev->vdev; + if (virtio_has_feature(vdev, VIRTIO_CONSOLE_F_SIZE)) { + vdev->config->get(vdev, + offsetof(struct virtio_console_config, cols), + &ws.ws_col, sizeof(u16)); + vdev->config->get(vdev, + offsetof(struct virtio_console_config, rows), + &ws.ws_row, sizeof(u16)); + hvc_resize(port->cons.hvc, ws); } } -/* - * we support only one console, the hvc struct is a global var - * We set the configuration at this point, since we now have a tty - */ +/* We set the configuration at this point, since we now have a tty */ static int notifier_add_vio(struct hvc_struct *hp, int data) { + struct port *port; + + port = find_port_by_vtermno(hp->vtermno); + if (!port) + return -EINVAL; + hp->irq_requested = 1; - virtcons_apply_config(vdev); + resize_console(port); return 0; } @@ -173,79 +713,797 @@ static void notifier_del_vio(struct hvc_struct *hp, int data) hp->irq_requested = 0; } -static void hvc_handle_input(struct virtqueue *vq) +/* The operations for console ports. */ +static const struct hv_ops hv_ops = { + .get_chars = get_chars, + .put_chars = put_chars, + .notifier_add = notifier_add_vio, + .notifier_del = notifier_del_vio, + .notifier_hangup = notifier_del_vio, +}; + +/* + * Console drivers are initialized very early so boot messages can go + * out, so we do things slightly differently from the generic virtio + * initialization of the net and block drivers. + * + * At this stage, the console is output-only. It's too early to set + * up a virtqueue, so we let the drivers do some boutique early-output + * thing. + */ +int __init virtio_cons_early_init(int (*put_chars)(u32, const char *, int)) { - if (hvc_poll(hvc)) + early_put_chars = put_chars; + return hvc_instantiate(0, 0, &hv_ops); +} + +int init_port_console(struct port *port) +{ + int ret; + + /* + * The Host's telling us this port is a console port. Hook it + * up with an hvc console. + * + * To set up and manage our virtual console, we call + * hvc_alloc(). + * + * The first argument of hvc_alloc() is the virtual console + * number. The second argument is the parameter for the + * notification mechanism (like irq number). We currently + * leave this as zero, virtqueues have implicit notifications. + * + * The third argument is a "struct hv_ops" containing the + * put_chars() get_chars(), notifier_add() and notifier_del() + * pointers. The final argument is the output buffer size: we + * can do any size, so we put PAGE_SIZE here. + */ + port->cons.vtermno = pdrvdata.next_vtermno; + + port->cons.hvc = hvc_alloc(port->cons.vtermno, 0, &hv_ops, PAGE_SIZE); + if (IS_ERR(port->cons.hvc)) { + ret = PTR_ERR(port->cons.hvc); + dev_err(port->dev, + "error %d allocating hvc for port\n", ret); + port->cons.hvc = NULL; + return ret; + } + spin_lock_irq(&pdrvdata_lock); + pdrvdata.next_vtermno++; + list_add_tail(&port->cons.list, &pdrvdata.consoles); + spin_unlock_irq(&pdrvdata_lock); + port->guest_connected = true; + + /* Notify host of port being opened */ + send_control_msg(port, VIRTIO_CONSOLE_PORT_OPEN, 1); + + return 0; +} + +static ssize_t show_port_name(struct device *dev, + struct device_attribute *attr, char *buffer) +{ + struct port *port; + + port = dev_get_drvdata(dev); + + return sprintf(buffer, "%s\n", port->name); +} + +static DEVICE_ATTR(name, S_IRUGO, show_port_name, NULL); + +static struct attribute *port_sysfs_entries[] = { + &dev_attr_name.attr, + NULL +}; + +static struct attribute_group port_attribute_group = { + .name = NULL, /* put in device directory */ + .attrs = port_sysfs_entries, +}; + +static int debugfs_open(struct inode *inode, struct file *filp) +{ + filp->private_data = inode->i_private; + return 0; +} + +static ssize_t debugfs_read(struct file *filp, char __user *ubuf, + size_t count, loff_t *offp) +{ + struct port *port; + char *buf; + ssize_t ret, out_offset, out_count; + + out_count = 1024; + buf = kmalloc(out_count, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + port = filp->private_data; + out_offset = 0; + out_offset += snprintf(buf + out_offset, out_count, + "name: %s\n", port->name ? port->name : ""); + out_offset += snprintf(buf + out_offset, out_count - out_offset, + "guest_connected: %d\n", port->guest_connected); + out_offset += snprintf(buf + out_offset, out_count - out_offset, + "host_connected: %d\n", port->host_connected); + out_offset += snprintf(buf + out_offset, out_count - out_offset, + "is_console: %s\n", + is_console_port(port) ? "yes" : "no"); + out_offset += snprintf(buf + out_offset, out_count - out_offset, + "console_vtermno: %u\n", port->cons.vtermno); + + ret = simple_read_from_buffer(ubuf, count, offp, buf, out_offset); + kfree(buf); + return ret; +} + +static const struct file_operations port_debugfs_ops = { + .owner = THIS_MODULE, + .open = debugfs_open, + .read = debugfs_read, +}; + +/* Remove all port-specific data. */ +static int remove_port(struct port *port) +{ + struct port_buffer *buf; + + spin_lock_irq(&port->portdev->ports_lock); + list_del(&port->list); + spin_unlock_irq(&port->portdev->ports_lock); + + if (is_console_port(port)) { + spin_lock_irq(&pdrvdata_lock); + list_del(&port->cons.list); + spin_unlock_irq(&pdrvdata_lock); + hvc_remove(port->cons.hvc); + } + if (port->guest_connected) + send_control_msg(port, VIRTIO_CONSOLE_PORT_OPEN, 0); + + sysfs_remove_group(&port->dev->kobj, &port_attribute_group); + device_destroy(pdrvdata.class, port->dev->devt); + cdev_del(&port->cdev); + + /* Remove unused data this port might have received. */ + discard_port_data(port); + + /* Remove buffers we queued up for the Host to send us data in. */ + while ((buf = port->in_vq->vq_ops->detach_unused_buf(port->in_vq))) + free_buf(buf); + + kfree(port->name); + + debugfs_remove(port->debugfs_file); + + kfree(port); + return 0; +} + +/* Any private messages that the Host and Guest want to share */ +static void handle_control_message(struct ports_device *portdev, + struct port_buffer *buf) +{ + struct virtio_console_control *cpkt; + struct port *port; + size_t name_size; + int err; + + cpkt = (struct virtio_console_control *)(buf->buf + buf->offset); + + port = find_port_by_id(portdev, cpkt->id); + if (!port) { + /* No valid header at start of buffer. Drop it. */ + dev_dbg(&portdev->vdev->dev, + "Invalid index %u in control packet\n", cpkt->id); + return; + } + + switch (cpkt->event) { + case VIRTIO_CONSOLE_CONSOLE_PORT: + if (!cpkt->value) + break; + if (is_console_port(port)) + break; + + init_port_console(port); + /* + * Could remove the port here in case init fails - but + * have to notify the host first. + */ + break; + case VIRTIO_CONSOLE_RESIZE: + if (!is_console_port(port)) + break; + port->cons.hvc->irq_requested = 1; + resize_console(port); + break; + case VIRTIO_CONSOLE_PORT_OPEN: + port->host_connected = cpkt->value; + wake_up_interruptible(&port->waitqueue); + break; + case VIRTIO_CONSOLE_PORT_NAME: + /* + * Skip the size of the header and the cpkt to get the size + * of the name that was sent + */ + name_size = buf->len - buf->offset - sizeof(*cpkt) + 1; + + port->name = kmalloc(name_size, GFP_KERNEL); + if (!port->name) { + dev_err(port->dev, + "Not enough space to store port name\n"); + break; + } + strncpy(port->name, buf->buf + buf->offset + sizeof(*cpkt), + name_size - 1); + port->name[name_size - 1] = 0; + + /* + * Since we only have one sysfs attribute, 'name', + * create it only if we have a name for the port. + */ + err = sysfs_create_group(&port->dev->kobj, + &port_attribute_group); + if (err) + dev_err(port->dev, + "Error %d creating sysfs device attributes\n", + err); + + break; + case VIRTIO_CONSOLE_PORT_REMOVE: + /* + * Hot unplug the port. We don't decrement nr_ports + * since we don't want to deal with extra complexities + * of using the lowest-available port id: We can just + * pick up the nr_ports number as the id and not have + * userspace send it to us. This helps us in two + * ways: + * + * - We don't need to have a 'port_id' field in the + * config space when a port is hot-added. This is a + * good thing as we might queue up multiple hotplug + * requests issued in our workqueue. + * + * - Another way to deal with this would have been to + * use a bitmap of the active ports and select the + * lowest non-active port from that map. That + * bloats the already tight config space and we + * would end up artificially limiting the + * max. number of ports to sizeof(bitmap). Right + * now we can support 2^32 ports (as the port id is + * stored in a u32 type). + * + */ + remove_port(port); + break; + } +} + +static void control_work_handler(struct work_struct *work) +{ + struct ports_device *portdev; + struct virtqueue *vq; + struct port_buffer *buf; + unsigned int len; + + portdev = container_of(work, struct ports_device, control_work); + vq = portdev->c_ivq; + + spin_lock(&portdev->cvq_lock); + while ((buf = vq->vq_ops->get_buf(vq, &len))) { + spin_unlock(&portdev->cvq_lock); + + buf->len = len; + buf->offset = 0; + + handle_control_message(portdev, buf); + + spin_lock(&portdev->cvq_lock); + if (add_inbuf(portdev->c_ivq, buf) < 0) { + dev_warn(&portdev->vdev->dev, + "Error adding buffer to queue\n"); + free_buf(buf); + } + } + spin_unlock(&portdev->cvq_lock); +} + +static void in_intr(struct virtqueue *vq) +{ + struct port *port; + unsigned long flags; + + port = find_port_by_vq(vq->vdev->priv, vq); + if (!port) + return; + + spin_lock_irqsave(&port->inbuf_lock, flags); + if (!port->inbuf) + port->inbuf = get_inbuf(port); + + /* + * Don't queue up data when port is closed. This condition + * can be reached when a console port is not yet connected (no + * tty is spawned) and the host sends out data to console + * ports. For generic serial ports, the host won't + * (shouldn't) send data till the guest is connected. + */ + if (!port->guest_connected) + discard_port_data(port); + + spin_unlock_irqrestore(&port->inbuf_lock, flags); + + wake_up_interruptible(&port->waitqueue); + + if (is_console_port(port) && hvc_poll(port->cons.hvc)) hvc_kick(); } -/*D:370 Once we're further in boot, we get probed like any other virtio device. - * At this stage we set up the output virtqueue. - * - * To set up and manage our virtual console, we call hvc_alloc(). Since we - * never remove the console device we never need this pointer again. +static void control_intr(struct virtqueue *vq) +{ + struct ports_device *portdev; + + portdev = vq->vdev->priv; + schedule_work(&portdev->control_work); +} + +static void config_intr(struct virtio_device *vdev) +{ + struct ports_device *portdev; + + portdev = vdev->priv; + if (use_multiport(portdev)) { + /* Handle port hot-add */ + schedule_work(&portdev->config_work); + } + /* + * We'll use this way of resizing only for legacy support. + * For newer userspace (VIRTIO_CONSOLE_F_MULTPORT+), use + * control messages to indicate console size changes so that + * it can be done per-port + */ + resize_console(find_port_by_id(portdev, 0)); +} + +static unsigned int fill_queue(struct virtqueue *vq, spinlock_t *lock) +{ + struct port_buffer *buf; + unsigned int ret; + int err; + + ret = 0; + do { + buf = alloc_buf(PAGE_SIZE); + if (!buf) + break; + + spin_lock_irq(lock); + err = add_inbuf(vq, buf); + if (err < 0) { + spin_unlock_irq(lock); + free_buf(buf); + break; + } + ret++; + spin_unlock_irq(lock); + } while (err > 0); + + return ret; +} + +static int add_port(struct ports_device *portdev, u32 id) +{ + char debugfs_name[16]; + struct port *port; + struct port_buffer *buf; + dev_t devt; + int err; + + port = kmalloc(sizeof(*port), GFP_KERNEL); + if (!port) { + err = -ENOMEM; + goto fail; + } + + port->portdev = portdev; + port->id = id; + + port->name = NULL; + port->inbuf = NULL; + port->cons.hvc = NULL; + + port->host_connected = port->guest_connected = false; + + port->in_vq = portdev->in_vqs[port->id]; + port->out_vq = portdev->out_vqs[port->id]; + + cdev_init(&port->cdev, &port_fops); + + devt = MKDEV(portdev->chr_major, id); + err = cdev_add(&port->cdev, devt, 1); + if (err < 0) { + dev_err(&port->portdev->vdev->dev, + "Error %d adding cdev for port %u\n", err, id); + goto free_port; + } + port->dev = device_create(pdrvdata.class, &port->portdev->vdev->dev, + devt, port, "vport%up%u", + port->portdev->drv_index, id); + if (IS_ERR(port->dev)) { + err = PTR_ERR(port->dev); + dev_err(&port->portdev->vdev->dev, + "Error %d creating device for port %u\n", + err, id); + goto free_cdev; + } + + spin_lock_init(&port->inbuf_lock); + init_waitqueue_head(&port->waitqueue); + + /* Fill the in_vq with buffers so the host can send us data. */ + err = fill_queue(port->in_vq, &port->inbuf_lock); + if (!err) { + dev_err(port->dev, "Error allocating inbufs\n"); + err = -ENOMEM; + goto free_device; + } + + /* + * If we're not using multiport support, this has to be a console port + */ + if (!use_multiport(port->portdev)) { + err = init_port_console(port); + if (err) + goto free_inbufs; + } + + spin_lock_irq(&portdev->ports_lock); + list_add_tail(&port->list, &port->portdev->ports); + spin_unlock_irq(&portdev->ports_lock); + + /* + * Tell the Host we're set so that it can send us various + * configuration parameters for this port (eg, port name, + * caching, whether this is a console port, etc.) + */ + send_control_msg(port, VIRTIO_CONSOLE_PORT_READY, 1); + + if (pdrvdata.debugfs_dir) { + /* + * Finally, create the debugfs file that we can use to + * inspect a port's state at any time + */ + sprintf(debugfs_name, "vport%up%u", + port->portdev->drv_index, id); + port->debugfs_file = debugfs_create_file(debugfs_name, 0444, + pdrvdata.debugfs_dir, + port, + &port_debugfs_ops); + } + return 0; + +free_inbufs: + while ((buf = port->in_vq->vq_ops->detach_unused_buf(port->in_vq))) + free_buf(buf); +free_device: + device_destroy(pdrvdata.class, port->dev->devt); +free_cdev: + cdev_del(&port->cdev); +free_port: + kfree(port); +fail: + return err; +} + +/* + * The workhandler for config-space updates. * - * Finally we put our input buffer in the input queue, ready to receive. */ -static int __devinit virtcons_probe(struct virtio_device *dev) + * This is called when ports are hot-added. + */ +static void config_work_handler(struct work_struct *work) +{ + struct virtio_console_config virtconconf; + struct ports_device *portdev; + struct virtio_device *vdev; + int err; + + portdev = container_of(work, struct ports_device, config_work); + + vdev = portdev->vdev; + vdev->config->get(vdev, + offsetof(struct virtio_console_config, nr_ports), + &virtconconf.nr_ports, + sizeof(virtconconf.nr_ports)); + + if (portdev->config.nr_ports == virtconconf.nr_ports) { + /* + * Port 0 got hot-added. Since we already did all the + * other initialisation for it, just tell the Host + * that the port is ready if we find the port. In + * case the port was hot-removed earlier, we call + * add_port to add the port. + */ + struct port *port; + + port = find_port_by_id(portdev, 0); + if (!port) + add_port(portdev, 0); + else + send_control_msg(port, VIRTIO_CONSOLE_PORT_READY, 1); + return; + } + if (virtconconf.nr_ports > portdev->config.max_nr_ports) { + dev_warn(&vdev->dev, + "More ports specified (%u) than allowed (%u)", + portdev->config.nr_ports + 1, + portdev->config.max_nr_ports); + return; + } + if (virtconconf.nr_ports < portdev->config.nr_ports) + return; + + /* Hot-add ports */ + while (virtconconf.nr_ports - portdev->config.nr_ports) { + err = add_port(portdev, portdev->config.nr_ports); + if (err) + break; + portdev->config.nr_ports++; + } +} + +static int init_vqs(struct ports_device *portdev) { - vq_callback_t *callbacks[] = { hvc_handle_input, NULL}; - const char *names[] = { "input", "output" }; - struct virtqueue *vqs[2]; + vq_callback_t **io_callbacks; + char **io_names; + struct virtqueue **vqs; + u32 i, j, nr_ports, nr_queues; int err; - vdev = dev; + nr_ports = portdev->config.max_nr_ports; + nr_queues = use_multiport(portdev) ? (nr_ports + 1) * 2 : 2; - /* This is the scratch page we use to receive console input */ - inbuf = kmalloc(PAGE_SIZE, GFP_KERNEL); - if (!inbuf) { + vqs = kmalloc(nr_queues * sizeof(struct virtqueue *), GFP_KERNEL); + if (!vqs) { err = -ENOMEM; goto fail; } + io_callbacks = kmalloc(nr_queues * sizeof(vq_callback_t *), GFP_KERNEL); + if (!io_callbacks) { + err = -ENOMEM; + goto free_vqs; + } + io_names = kmalloc(nr_queues * sizeof(char *), GFP_KERNEL); + if (!io_names) { + err = -ENOMEM; + goto free_callbacks; + } + portdev->in_vqs = kmalloc(nr_ports * sizeof(struct virtqueue *), + GFP_KERNEL); + if (!portdev->in_vqs) { + err = -ENOMEM; + goto free_names; + } + portdev->out_vqs = kmalloc(nr_ports * sizeof(struct virtqueue *), + GFP_KERNEL); + if (!portdev->out_vqs) { + err = -ENOMEM; + goto free_invqs; + } + + /* + * For backward compat (newer host but older guest), the host + * spawns a console port first and also inits the vqs for port + * 0 before others. + */ + j = 0; + io_callbacks[j] = in_intr; + io_callbacks[j + 1] = NULL; + io_names[j] = "input"; + io_names[j + 1] = "output"; + j += 2; + if (use_multiport(portdev)) { + io_callbacks[j] = control_intr; + io_callbacks[j + 1] = NULL; + io_names[j] = "control-i"; + io_names[j + 1] = "control-o"; + + for (i = 1; i < nr_ports; i++) { + j += 2; + io_callbacks[j] = in_intr; + io_callbacks[j + 1] = NULL; + io_names[j] = "input"; + io_names[j + 1] = "output"; + } + } /* Find the queues. */ - /* FIXME: This is why we want to wean off hvc: we do nothing - * when input comes in. */ - err = vdev->config->find_vqs(vdev, 2, vqs, callbacks, names); + err = portdev->vdev->config->find_vqs(portdev->vdev, nr_queues, vqs, + io_callbacks, + (const char **)io_names); if (err) + goto free_outvqs; + + j = 0; + portdev->in_vqs[0] = vqs[0]; + portdev->out_vqs[0] = vqs[1]; + j += 2; + if (use_multiport(portdev)) { + portdev->c_ivq = vqs[j]; + portdev->c_ovq = vqs[j + 1]; + + for (i = 1; i < nr_ports; i++) { + j += 2; + portdev->in_vqs[i] = vqs[j]; + portdev->out_vqs[i] = vqs[j + 1]; + } + } + kfree(io_callbacks); + kfree(io_names); + kfree(vqs); + + return 0; + +free_names: + kfree(io_names); +free_callbacks: + kfree(io_callbacks); +free_outvqs: + kfree(portdev->out_vqs); +free_invqs: + kfree(portdev->in_vqs); +free_vqs: + kfree(vqs); +fail: + return err; +} + +static const struct file_operations portdev_fops = { + .owner = THIS_MODULE, +}; + +/* + * Once we're further in boot, we get probed like any other virtio + * device. + * + * If the host also supports multiple console ports, we check the + * config space to see how many ports the host has spawned. We + * initialize each port found. + */ +static int __devinit virtcons_probe(struct virtio_device *vdev) +{ + struct ports_device *portdev; + u32 i; + int err; + bool multiport; + + portdev = kmalloc(sizeof(*portdev), GFP_KERNEL); + if (!portdev) { + err = -ENOMEM; + goto fail; + } + + /* Attach this portdev to this virtio_device, and vice-versa. */ + portdev->vdev = vdev; + vdev->priv = portdev; + + spin_lock_irq(&pdrvdata_lock); + portdev->drv_index = pdrvdata.index++; + spin_unlock_irq(&pdrvdata_lock); + + portdev->chr_major = register_chrdev(0, "virtio-portsdev", + &portdev_fops); + if (portdev->chr_major < 0) { + dev_err(&vdev->dev, + "Error %d registering chrdev for device %u\n", + portdev->chr_major, portdev->drv_index); + err = portdev->chr_major; goto free; + } - in_vq = vqs[0]; - out_vq = vqs[1]; + multiport = false; + portdev->config.nr_ports = 1; + portdev->config.max_nr_ports = 1; + if (virtio_has_feature(vdev, VIRTIO_CONSOLE_F_MULTIPORT)) { + multiport = true; + vdev->features[0] |= 1 << VIRTIO_CONSOLE_F_MULTIPORT; - /* Start using the new console output. */ - virtio_cons.get_chars = get_chars; - virtio_cons.put_chars = put_chars; - virtio_cons.notifier_add = notifier_add_vio; - virtio_cons.notifier_del = notifier_del_vio; - virtio_cons.notifier_hangup = notifier_del_vio; - - /* The first argument of hvc_alloc() is the virtual console number, so - * we use zero. The second argument is the parameter for the - * notification mechanism (like irq number). We currently leave this - * as zero, virtqueues have implicit notifications. - * - * The third argument is a "struct hv_ops" containing the put_chars() - * get_chars(), notifier_add() and notifier_del() pointers. - * The final argument is the output buffer size: we can do any size, - * so we put PAGE_SIZE here. */ - hvc = hvc_alloc(0, 0, &virtio_cons, PAGE_SIZE); - if (IS_ERR(hvc)) { - err = PTR_ERR(hvc); - goto free_vqs; + vdev->config->get(vdev, offsetof(struct virtio_console_config, + nr_ports), + &portdev->config.nr_ports, + sizeof(portdev->config.nr_ports)); + vdev->config->get(vdev, offsetof(struct virtio_console_config, + max_nr_ports), + &portdev->config.max_nr_ports, + sizeof(portdev->config.max_nr_ports)); + if (portdev->config.nr_ports > portdev->config.max_nr_ports) { + dev_warn(&vdev->dev, + "More ports (%u) specified than allowed (%u). Will init %u ports.", + portdev->config.nr_ports, + portdev->config.max_nr_ports, + portdev->config.max_nr_ports); + + portdev->config.nr_ports = portdev->config.max_nr_ports; + } + } + + /* Let the Host know we support multiple ports.*/ + vdev->config->finalize_features(vdev); + + err = init_vqs(portdev); + if (err < 0) { + dev_err(&vdev->dev, "Error %d initializing vqs\n", err); + goto free_chrdev; + } + + spin_lock_init(&portdev->ports_lock); + INIT_LIST_HEAD(&portdev->ports); + + if (multiport) { + spin_lock_init(&portdev->cvq_lock); + INIT_WORK(&portdev->control_work, &control_work_handler); + INIT_WORK(&portdev->config_work, &config_work_handler); + + err = fill_queue(portdev->c_ivq, &portdev->cvq_lock); + if (!err) { + dev_err(&vdev->dev, + "Error allocating buffers for control queue\n"); + err = -ENOMEM; + goto free_vqs; + } } - /* Register the input buffer the first time. */ - add_inbuf(); + for (i = 0; i < portdev->config.nr_ports; i++) + add_port(portdev, i); + + /* Start using the new console output. */ + early_put_chars = NULL; return 0; free_vqs: vdev->config->del_vqs(vdev); + kfree(portdev->in_vqs); + kfree(portdev->out_vqs); +free_chrdev: + unregister_chrdev(portdev->chr_major, "virtio-portsdev"); free: - kfree(inbuf); + kfree(portdev); fail: return err; } +static void virtcons_remove(struct virtio_device *vdev) +{ + struct ports_device *portdev; + struct port *port, *port2; + struct port_buffer *buf; + unsigned int len; + + portdev = vdev->priv; + + cancel_work_sync(&portdev->control_work); + cancel_work_sync(&portdev->config_work); + + list_for_each_entry_safe(port, port2, &portdev->ports, list) + remove_port(port); + + unregister_chrdev(portdev->chr_major, "virtio-portsdev"); + + while ((buf = portdev->c_ivq->vq_ops->get_buf(portdev->c_ivq, &len))) + free_buf(buf); + + while ((buf = portdev->c_ivq->vq_ops->detach_unused_buf(portdev->c_ivq))) + free_buf(buf); + + vdev->config->del_vqs(vdev); + kfree(portdev->in_vqs); + kfree(portdev->out_vqs); + + kfree(portdev); +} + static struct virtio_device_id id_table[] = { { VIRTIO_ID_CONSOLE, VIRTIO_DEV_ANY_ID }, { 0 }, @@ -253,6 +1511,7 @@ static struct virtio_device_id id_table[] = { static unsigned int features[] = { VIRTIO_CONSOLE_F_SIZE, + VIRTIO_CONSOLE_F_MULTIPORT, }; static struct virtio_driver virtio_console = { @@ -262,14 +1521,41 @@ static struct virtio_driver virtio_console = { .driver.owner = THIS_MODULE, .id_table = id_table, .probe = virtcons_probe, - .config_changed = virtcons_apply_config, + .remove = virtcons_remove, + .config_changed = config_intr, }; static int __init init(void) { + int err; + + pdrvdata.class = class_create(THIS_MODULE, "virtio-ports"); + if (IS_ERR(pdrvdata.class)) { + err = PTR_ERR(pdrvdata.class); + pr_err("Error %d creating virtio-ports class\n", err); + return err; + } + + pdrvdata.debugfs_dir = debugfs_create_dir("virtio-ports", NULL); + if (!pdrvdata.debugfs_dir) { + pr_warning("Error %ld creating debugfs dir for virtio-ports\n", + PTR_ERR(pdrvdata.debugfs_dir)); + } + INIT_LIST_HEAD(&pdrvdata.consoles); + return register_virtio_driver(&virtio_console); } + +static void __exit fini(void) +{ + unregister_virtio_driver(&virtio_console); + + class_destroy(pdrvdata.class); + if (pdrvdata.debugfs_dir) + debugfs_remove_recursive(pdrvdata.debugfs_dir); +} module_init(init); +module_exit(fini); MODULE_DEVICE_TABLE(virtio, id_table); MODULE_DESCRIPTION("Virtio console driver"); diff --git a/drivers/clocksource/cs5535-clockevt.c b/drivers/clocksource/cs5535-clockevt.c index 27d20fa..b314a99 100644 --- a/drivers/clocksource/cs5535-clockevt.c +++ b/drivers/clocksource/cs5535-clockevt.c @@ -21,7 +21,7 @@ #define DRV_NAME "cs5535-clockevt" -static int timer_irq = CONFIG_CS5535_MFGPT_DEFAULT_IRQ; +static int timer_irq; module_param_named(irq, timer_irq, int, 0644); MODULE_PARM_DESC(irq, "Which IRQ to use for the clock source MFGPT ticks."); diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index f665b05..ab6c973 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -598,6 +598,50 @@ struct drm_display_mode *drm_mode_std(struct drm_device *dev, return mode; } +/* + * EDID is delightfully ambiguous about how interlaced modes are to be + * encoded. Our internal representation is of frame height, but some + * HDTV detailed timings are encoded as field height. + * + * The format list here is from CEA, in frame size. Technically we + * should be checking refresh rate too. Whatever. + */ +static void +drm_mode_do_interlace_quirk(struct drm_display_mode *mode, + struct detailed_pixel_timing *pt) +{ + int i; + static const struct { + int w, h; + } cea_interlaced[] = { + { 1920, 1080 }, + { 720, 480 }, + { 1440, 480 }, + { 2880, 480 }, + { 720, 576 }, + { 1440, 576 }, + { 2880, 576 }, + }; + static const int n_sizes = + sizeof(cea_interlaced)/sizeof(cea_interlaced[0]); + + if (!(pt->misc & DRM_EDID_PT_INTERLACED)) + return; + + for (i = 0; i < n_sizes; i++) { + if ((mode->hdisplay == cea_interlaced[i].w) && + (mode->vdisplay == cea_interlaced[i].h / 2)) { + mode->vdisplay *= 2; + mode->vsync_start *= 2; + mode->vsync_end *= 2; + mode->vtotal *= 2; + mode->vtotal |= 1; + } + } + + mode->flags |= DRM_MODE_FLAG_INTERLACE; +} + /** * drm_mode_detailed - create a new mode from an EDID detailed timing section * @dev: DRM device (needed to create new mode) @@ -680,8 +724,7 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev, drm_mode_set_name(mode); - if (pt->misc & DRM_EDID_PT_INTERLACED) - mode->flags |= DRM_MODE_FLAG_INTERLACE; + drm_mode_do_interlace_quirk(mode, pt); if (quirks & EDID_QUIRK_DETAILED_SYNC_PP) { pt->misc |= DRM_EDID_PT_HSYNC_POSITIVE | DRM_EDID_PT_VSYNC_POSITIVE; diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 79beffc..cf4cb3e 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -176,6 +176,8 @@ MODULE_DEVICE_TABLE(pci, pciidlist); static int i915_drm_freeze(struct drm_device *dev) { + struct drm_i915_private *dev_priv = dev->dev_private; + pci_save_state(dev->pdev); /* If KMS is active, we do the leavevt stuff here */ @@ -191,17 +193,12 @@ static int i915_drm_freeze(struct drm_device *dev) i915_save_state(dev); - return 0; -} - -static void i915_drm_suspend(struct drm_device *dev) -{ - struct drm_i915_private *dev_priv = dev->dev_private; - intel_opregion_free(dev, 1); /* Modeset on resume, not lid events */ dev_priv->modeset_on_lid = 0; + + return 0; } static int i915_suspend(struct drm_device *dev, pm_message_t state) @@ -221,8 +218,6 @@ static int i915_suspend(struct drm_device *dev, pm_message_t state) if (error) return error; - i915_drm_suspend(dev); - if (state.event == PM_EVENT_SUSPEND) { /* Shut down the device */ pci_disable_device(dev->pdev); @@ -237,6 +232,10 @@ static int i915_drm_thaw(struct drm_device *dev) struct drm_i915_private *dev_priv = dev->dev_private; int error = 0; + i915_restore_state(dev); + + intel_opregion_init(dev, 1); + /* KMS EnterVT equivalent */ if (drm_core_check_feature(dev, DRIVER_MODESET)) { mutex_lock(&dev->struct_mutex); @@ -263,10 +262,6 @@ static int i915_resume(struct drm_device *dev) pci_set_master(dev->pdev); - i915_restore_state(dev); - - intel_opregion_init(dev, 1); - return i915_drm_thaw(dev); } @@ -423,8 +418,6 @@ static int i915_pm_suspend(struct device *dev) if (error) return error; - i915_drm_suspend(drm_dev); - pci_disable_device(pdev); pci_set_power_state(pdev, PCI_D3hot); @@ -464,13 +457,8 @@ static int i915_pm_poweroff(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); struct drm_device *drm_dev = pci_get_drvdata(pdev); - int error; - - error = i915_drm_freeze(drm_dev); - if (!error) - i915_drm_suspend(drm_dev); - return error; + return i915_drm_freeze(drm_dev); } const struct dev_pm_ops i915_pm_ops = { diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index b1d0acb..c2e8a45 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -636,6 +636,13 @@ static const struct dmi_system_id bad_lid_status[] = { DMI_MATCH(DMI_PRODUCT_NAME, "PC-81005"), }, }, + { + .ident = "Clevo M5x0N", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "CLEVO Co."), + DMI_MATCH(DMI_BOARD_NAME, "M5x0N"), + }, + }, { } }; diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c index 2cd0fad..0e9cd1d 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bios.c +++ b/drivers/gpu/drm/nouveau/nouveau_bios.c @@ -5861,13 +5861,12 @@ nouveau_bios_run_init_table(struct drm_device *dev, uint16_t table, struct drm_nouveau_private *dev_priv = dev->dev_private; struct nvbios *bios = &dev_priv->VBIOS; struct init_exec iexec = { true, false }; - unsigned long flags; - spin_lock_irqsave(&bios->lock, flags); + mutex_lock(&bios->lock); bios->display.output = dcbent; parse_init_table(bios, table, &iexec); bios->display.output = NULL; - spin_unlock_irqrestore(&bios->lock, flags); + mutex_unlock(&bios->lock); } static bool NVInitVBIOS(struct drm_device *dev) @@ -5876,7 +5875,7 @@ static bool NVInitVBIOS(struct drm_device *dev) struct nvbios *bios = &dev_priv->VBIOS; memset(bios, 0, sizeof(struct nvbios)); - spin_lock_init(&bios->lock); + mutex_init(&bios->lock); bios->dev = dev; if (!NVShadowVBIOS(dev, bios->data)) diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.h b/drivers/gpu/drm/nouveau/nouveau_bios.h index 68446fd..fd94bd6 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bios.h +++ b/drivers/gpu/drm/nouveau/nouveau_bios.h @@ -205,7 +205,7 @@ struct nvbios { struct drm_device *dev; struct nouveau_bios_info pub; - spinlock_t lock; + struct mutex lock; uint8_t data[NV_PROM_SIZE]; unsigned int length; diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h index 5445cef..1c15ef3 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.h +++ b/drivers/gpu/drm/nouveau/nouveau_drv.h @@ -583,6 +583,7 @@ struct drm_nouveau_private { uint64_t vm_end; struct nouveau_gpuobj *vm_vram_pt[NV50_VM_VRAM_NR]; int vm_vram_pt_nr; + uint64_t vram_sys_base; /* the mtrr covering the FB */ int fb_mtrr; diff --git a/drivers/gpu/drm/nouveau/nouveau_mem.c b/drivers/gpu/drm/nouveau/nouveau_mem.c index 8f3a12f..2dc09db 100644 --- a/drivers/gpu/drm/nouveau/nouveau_mem.c +++ b/drivers/gpu/drm/nouveau/nouveau_mem.c @@ -285,53 +285,50 @@ nv50_mem_vm_bind_linear(struct drm_device *dev, uint64_t virt, uint32_t size, uint32_t flags, uint64_t phys) { struct drm_nouveau_private *dev_priv = dev->dev_private; - struct nouveau_gpuobj **pgt; - unsigned psz, pfl, pages; - - if (virt >= dev_priv->vm_gart_base && - (virt + size) < (dev_priv->vm_gart_base + dev_priv->vm_gart_size)) { - psz = 12; - pgt = &dev_priv->gart_info.sg_ctxdma; - pfl = 0x21; - virt -= dev_priv->vm_gart_base; - } else - if (virt >= dev_priv->vm_vram_base && - (virt + size) < (dev_priv->vm_vram_base + dev_priv->vm_vram_size)) { - psz = 16; - pgt = dev_priv->vm_vram_pt; - pfl = 0x01; - virt -= dev_priv->vm_vram_base; - } else { - NV_ERROR(dev, "Invalid address: 0x%16llx-0x%16llx\n", - virt, virt + size - 1); - return -EINVAL; - } + struct nouveau_gpuobj *pgt; + unsigned block; + int i; - pages = size >> psz; + virt = ((virt - dev_priv->vm_vram_base) >> 16) << 1; + size = (size >> 16) << 1; + + phys |= ((uint64_t)flags << 32); + phys |= 1; + if (dev_priv->vram_sys_base) { + phys += dev_priv->vram_sys_base; + phys |= 0x30; + } dev_priv->engine.instmem.prepare_access(dev, true); - if (flags & 0x80000000) { - while (pages--) { - struct nouveau_gpuobj *pt = pgt[virt >> 29]; - unsigned pte = ((virt & 0x1fffffffULL) >> psz) << 1; + while (size) { + unsigned offset_h = upper_32_bits(phys); + unsigned offset_l = lower_32_bits(phys); + unsigned pte, end; + + for (i = 7; i >= 0; i--) { + block = 1 << (i + 1); + if (size >= block && !(virt & (block - 1))) + break; + } + offset_l |= (i << 7); - nv_wo32(dev, pt, pte++, 0x00000000); - nv_wo32(dev, pt, pte++, 0x00000000); + phys += block << 15; + size -= block; - virt += (1 << psz); - } - } else { - while (pages--) { - struct nouveau_gpuobj *pt = pgt[virt >> 29]; - unsigned pte = ((virt & 0x1fffffffULL) >> psz) << 1; - unsigned offset_h = upper_32_bits(phys) & 0xff; - unsigned offset_l = lower_32_bits(phys); + while (block) { + pgt = dev_priv->vm_vram_pt[virt >> 14]; + pte = virt & 0x3ffe; - nv_wo32(dev, pt, pte++, offset_l | pfl); - nv_wo32(dev, pt, pte++, offset_h | flags); + end = pte + block; + if (end > 16384) + end = 16384; + block -= (end - pte); + virt += (end - pte); - phys += (1 << psz); - virt += (1 << psz); + while (pte < end) { + nv_wo32(dev, pgt, pte++, offset_l); + nv_wo32(dev, pgt, pte++, offset_h); + } } } dev_priv->engine.instmem.finish_access(dev); @@ -356,7 +353,41 @@ nv50_mem_vm_bind_linear(struct drm_device *dev, uint64_t virt, uint32_t size, void nv50_mem_vm_unbind(struct drm_device *dev, uint64_t virt, uint32_t size) { - nv50_mem_vm_bind_linear(dev, virt, size, 0x80000000, 0); + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_gpuobj *pgt; + unsigned pages, pte, end; + + virt -= dev_priv->vm_vram_base; + pages = (size >> 16) << 1; + + dev_priv->engine.instmem.prepare_access(dev, true); + while (pages) { + pgt = dev_priv->vm_vram_pt[virt >> 29]; + pte = (virt & 0x1ffe0000ULL) >> 15; + + end = pte + pages; + if (end > 16384) + end = 16384; + pages -= (end - pte); + virt += (end - pte) << 15; + + while (pte < end) + nv_wo32(dev, pgt, pte++, 0); + } + dev_priv->engine.instmem.finish_access(dev); + + nv_wr32(dev, 0x100c80, 0x00050001); + if (!nv_wait(0x100c80, 0x00000001, 0x00000000)) { + NV_ERROR(dev, "timeout: (0x100c80 & 1) == 0 (2)\n"); + NV_ERROR(dev, "0x100c80 = 0x%08x\n", nv_rd32(dev, 0x100c80)); + return; + } + + nv_wr32(dev, 0x100c80, 0x00000001); + if (!nv_wait(0x100c80, 0x00000001, 0x00000000)) { + NV_ERROR(dev, "timeout: (0x100c80 & 1) == 0 (2)\n"); + NV_ERROR(dev, "0x100c80 = 0x%08x\n", nv_rd32(dev, 0x100c80)); + } } /* diff --git a/drivers/gpu/drm/nouveau/nv04_dac.c b/drivers/gpu/drm/nouveau/nv04_dac.c index d0e038d..1d73b15 100644 --- a/drivers/gpu/drm/nouveau/nv04_dac.c +++ b/drivers/gpu/drm/nouveau/nv04_dac.c @@ -119,7 +119,7 @@ static enum drm_connector_status nv04_dac_detect(struct drm_encoder *encoder, struct drm_connector *connector) { struct drm_device *dev = encoder->dev; - uint8_t saved_seq1, saved_pi, saved_rpc1; + uint8_t saved_seq1, saved_pi, saved_rpc1, saved_cr_mode; uint8_t saved_palette0[3], saved_palette_mask; uint32_t saved_rtest_ctrl, saved_rgen_ctrl; int i; @@ -135,6 +135,9 @@ static enum drm_connector_status nv04_dac_detect(struct drm_encoder *encoder, /* only implemented for head A for now */ NVSetOwner(dev, 0); + saved_cr_mode = NVReadVgaCrtc(dev, 0, NV_CIO_CR_MODE_INDEX); + NVWriteVgaCrtc(dev, 0, NV_CIO_CR_MODE_INDEX, saved_cr_mode | 0x80); + saved_seq1 = NVReadVgaSeq(dev, 0, NV_VIO_SR_CLOCK_INDEX); NVWriteVgaSeq(dev, 0, NV_VIO_SR_CLOCK_INDEX, saved_seq1 & ~0x20); @@ -203,6 +206,7 @@ out: NVWriteVgaCrtc(dev, 0, NV_CIO_CRE_PIXEL_INDEX, saved_pi); NVWriteVgaCrtc(dev, 0, NV_CIO_CRE_RPC1_INDEX, saved_rpc1); NVWriteVgaSeq(dev, 0, NV_VIO_SR_CLOCK_INDEX, saved_seq1); + NVWriteVgaCrtc(dev, 0, NV_CIO_CR_MODE_INDEX, saved_cr_mode); if (blue == 0x18) { NV_INFO(dev, "Load detected on head A\n"); diff --git a/drivers/gpu/drm/nouveau/nv17_tv.c b/drivers/gpu/drm/nouveau/nv17_tv.c index 58b917c..21ac6e4 100644 --- a/drivers/gpu/drm/nouveau/nv17_tv.c +++ b/drivers/gpu/drm/nouveau/nv17_tv.c @@ -579,6 +579,8 @@ static void nv17_tv_restore(struct drm_encoder *encoder) nouveau_encoder(encoder)->restore.output); nv17_tv_state_load(dev, &to_tv_enc(encoder)->saved_state); + + nouveau_encoder(encoder)->last_dpms = NV_DPMS_CLEARED; } static int nv17_tv_create_resources(struct drm_encoder *encoder, diff --git a/drivers/gpu/drm/nouveau/nv50_instmem.c b/drivers/gpu/drm/nouveau/nv50_instmem.c index 94400f7..f0dc4e3 100644 --- a/drivers/gpu/drm/nouveau/nv50_instmem.c +++ b/drivers/gpu/drm/nouveau/nv50_instmem.c @@ -76,6 +76,11 @@ nv50_instmem_init(struct drm_device *dev) for (i = 0x1700; i <= 0x1710; i += 4) priv->save1700[(i-0x1700)/4] = nv_rd32(dev, i); + if (dev_priv->chipset == 0xaa || dev_priv->chipset == 0xac) + dev_priv->vram_sys_base = nv_rd32(dev, 0x100e10) << 12; + else + dev_priv->vram_sys_base = 0; + /* Reserve the last MiB of VRAM, we should probably try to avoid * setting up the below tables over the top of the VBIOS image at * some point. @@ -172,16 +177,28 @@ nv50_instmem_init(struct drm_device *dev) * We map the entire fake channel into the start of the PRAMIN BAR */ ret = nouveau_gpuobj_new_ref(dev, chan, NULL, 0, pt_size, 0x1000, - 0, &priv->pramin_pt); + 0, &priv->pramin_pt); if (ret) return ret; - for (i = 0, v = c_offset; i < pt_size; i += 8, v += 0x1000) { - if (v < (c_offset + c_size)) - BAR0_WI32(priv->pramin_pt->gpuobj, i + 0, v | 1); - else - BAR0_WI32(priv->pramin_pt->gpuobj, i + 0, 0x00000009); + v = c_offset | 1; + if (dev_priv->vram_sys_base) { + v += dev_priv->vram_sys_base; + v |= 0x30; + } + + i = 0; + while (v < dev_priv->vram_sys_base + c_offset + c_size) { + BAR0_WI32(priv->pramin_pt->gpuobj, i + 0, v); + BAR0_WI32(priv->pramin_pt->gpuobj, i + 4, 0x00000000); + v += 0x1000; + i += 8; + } + + while (i < pt_size) { + BAR0_WI32(priv->pramin_pt->gpuobj, i + 0, 0x00000000); BAR0_WI32(priv->pramin_pt->gpuobj, i + 4, 0x00000000); + i += 8; } BAR0_WI32(chan->vm_pd, 0x00, priv->pramin_pt->instance | 0x63); @@ -416,7 +433,9 @@ nv50_instmem_bind(struct drm_device *dev, struct nouveau_gpuobj *gpuobj) { struct drm_nouveau_private *dev_priv = dev->dev_private; struct nv50_instmem_priv *priv = dev_priv->engine.instmem.priv; - uint32_t pte, pte_end, vram; + struct nouveau_gpuobj *pramin_pt = priv->pramin_pt->gpuobj; + uint32_t pte, pte_end; + uint64_t vram; if (!gpuobj->im_backing || !gpuobj->im_pramin || gpuobj->im_bound) return -EINVAL; @@ -424,20 +443,24 @@ nv50_instmem_bind(struct drm_device *dev, struct nouveau_gpuobj *gpuobj) NV_DEBUG(dev, "st=0x%0llx sz=0x%0llx\n", gpuobj->im_pramin->start, gpuobj->im_pramin->size); - pte = (gpuobj->im_pramin->start >> 12) << 3; - pte_end = ((gpuobj->im_pramin->size >> 12) << 3) + pte; + pte = (gpuobj->im_pramin->start >> 12) << 1; + pte_end = ((gpuobj->im_pramin->size >> 12) << 1) + pte; vram = gpuobj->im_backing_start; NV_DEBUG(dev, "pramin=0x%llx, pte=%d, pte_end=%d\n", gpuobj->im_pramin->start, pte, pte_end); NV_DEBUG(dev, "first vram page: 0x%08x\n", gpuobj->im_backing_start); + vram |= 1; + if (dev_priv->vram_sys_base) { + vram += dev_priv->vram_sys_base; + vram |= 0x30; + } + dev_priv->engine.instmem.prepare_access(dev, true); while (pte < pte_end) { - nv_wo32(dev, priv->pramin_pt->gpuobj, (pte + 0)/4, vram | 1); - nv_wo32(dev, priv->pramin_pt->gpuobj, (pte + 4)/4, 0x00000000); - - pte += 8; + nv_wo32(dev, pramin_pt, pte++, lower_32_bits(vram)); + nv_wo32(dev, pramin_pt, pte++, upper_32_bits(vram)); vram += NV50_INSTMEM_PAGE_SIZE; } dev_priv->engine.instmem.finish_access(dev); @@ -470,14 +493,13 @@ nv50_instmem_unbind(struct drm_device *dev, struct nouveau_gpuobj *gpuobj) if (gpuobj->im_bound == 0) return -EINVAL; - pte = (gpuobj->im_pramin->start >> 12) << 3; - pte_end = ((gpuobj->im_pramin->size >> 12) << 3) + pte; + pte = (gpuobj->im_pramin->start >> 12) << 1; + pte_end = ((gpuobj->im_pramin->size >> 12) << 1) + pte; dev_priv->engine.instmem.prepare_access(dev, true); while (pte < pte_end) { - nv_wo32(dev, priv->pramin_pt->gpuobj, (pte + 0)/4, 0x00000009); - nv_wo32(dev, priv->pramin_pt->gpuobj, (pte + 4)/4, 0x00000000); - pte += 8; + nv_wo32(dev, priv->pramin_pt->gpuobj, pte++, 0x00000000); + nv_wo32(dev, priv->pramin_pt->gpuobj, pte++, 0x00000000); } dev_priv->engine.instmem.finish_access(dev); diff --git a/drivers/gpu/drm/radeon/atom.c b/drivers/gpu/drm/radeon/atom.c index 2a3df55..7f152f6 100644 --- a/drivers/gpu/drm/radeon/atom.c +++ b/drivers/gpu/drm/radeon/atom.c @@ -643,7 +643,7 @@ static void atom_op_delay(atom_exec_context *ctx, int *ptr, int arg) uint8_t count = U8((*ptr)++); SDEBUG(" count: %d\n", count); if (arg == ATOM_UNIT_MICROSEC) - schedule_timeout_uninterruptible(usecs_to_jiffies(count)); + udelay(count); else schedule_timeout_uninterruptible(msecs_to_jiffies(count)); } diff --git a/drivers/gpu/drm/radeon/r600_blit_kms.c b/drivers/gpu/drm/radeon/r600_blit_kms.c index af1c3ca..446b765 100644 --- a/drivers/gpu/drm/radeon/r600_blit_kms.c +++ b/drivers/gpu/drm/radeon/r600_blit_kms.c @@ -543,9 +543,6 @@ int r600_vb_ib_get(struct radeon_device *rdev) void r600_vb_ib_put(struct radeon_device *rdev) { radeon_fence_emit(rdev, rdev->r600_blit.vb_ib->fence); - mutex_lock(&rdev->ib_pool.mutex); - list_add_tail(&rdev->r600_blit.vb_ib->list, &rdev->ib_pool.scheduled_ibs); - mutex_unlock(&rdev->ib_pool.mutex); radeon_ib_free(rdev, &rdev->r600_blit.vb_ib); } diff --git a/drivers/gpu/drm/radeon/r600_cp.c b/drivers/gpu/drm/radeon/r600_cp.c index 6d5a711..75bcf35 100644 --- a/drivers/gpu/drm/radeon/r600_cp.c +++ b/drivers/gpu/drm/radeon/r600_cp.c @@ -1428,9 +1428,12 @@ static void r700_gfx_init(struct drm_device *dev, gb_tiling_config |= R600_BANK_SWAPS(1); - backend_map = r700_get_tile_pipe_to_backend_map(dev_priv->r600_max_tile_pipes, - dev_priv->r600_max_backends, - (0xff << dev_priv->r600_max_backends) & 0xff); + if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV740) + backend_map = 0x28; + else + backend_map = r700_get_tile_pipe_to_backend_map(dev_priv->r600_max_tile_pipes, + dev_priv->r600_max_backends, + (0xff << dev_priv->r600_max_backends) & 0xff); gb_tiling_config |= R600_BACKEND_MAP(backend_map); cc_gc_shader_pipe_config = diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index f57480b..c0356bb 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -96,6 +96,7 @@ extern int radeon_audio; * symbol; */ #define RADEON_MAX_USEC_TIMEOUT 100000 /* 100 ms */ +/* RADEON_IB_POOL_SIZE must be a power of 2 */ #define RADEON_IB_POOL_SIZE 16 #define RADEON_DEBUGFS_MAX_NUM_FILES 32 #define RADEONFB_CONN_LIMIT 4 @@ -363,11 +364,12 @@ void radeon_irq_kms_sw_irq_put(struct radeon_device *rdev); */ struct radeon_ib { struct list_head list; - unsigned long idx; + unsigned idx; uint64_t gpu_addr; struct radeon_fence *fence; - uint32_t *ptr; + uint32_t *ptr; uint32_t length_dw; + bool free; }; /* @@ -377,10 +379,9 @@ struct radeon_ib { struct radeon_ib_pool { struct mutex mutex; struct radeon_bo *robj; - struct list_head scheduled_ibs; struct radeon_ib ibs[RADEON_IB_POOL_SIZE]; bool ready; - DECLARE_BITMAP(alloc_bm, RADEON_IB_POOL_SIZE); + unsigned head_id; }; struct radeon_cp { diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 2dcda61..4d88315 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -206,6 +206,15 @@ static bool radeon_atom_apply_quirks(struct drm_device *dev, *connector_type = DRM_MODE_CONNECTOR_DVID; } + /* Asrock RS600 board lists the DVI port as HDMI */ + if ((dev->pdev->device == 0x7941) && + (dev->pdev->subsystem_vendor == 0x1849) && + (dev->pdev->subsystem_device == 0x7941)) { + if ((*connector_type == DRM_MODE_CONNECTOR_HDMIA) && + (supported_device == ATOM_DEVICE_DFP3_SUPPORT)) + *connector_type = DRM_MODE_CONNECTOR_DVID; + } + /* a-bit f-i90hd - ciaranm on #radeonhd - this board has no DVI */ if ((dev->pdev->device == 0x7941) && (dev->pdev->subsystem_vendor == 0x147b) && diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index e7b1944..22d4761 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -1279,47 +1279,47 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) rdev->mode_info.connector_table = radeon_connector_table; if (rdev->mode_info.connector_table == CT_NONE) { #ifdef CONFIG_PPC_PMAC - if (machine_is_compatible("PowerBook3,3")) { + if (of_machine_is_compatible("PowerBook3,3")) { /* powerbook with VGA */ rdev->mode_info.connector_table = CT_POWERBOOK_VGA; - } else if (machine_is_compatible("PowerBook3,4") || - machine_is_compatible("PowerBook3,5")) { + } else if (of_machine_is_compatible("PowerBook3,4") || + of_machine_is_compatible("PowerBook3,5")) { /* powerbook with internal tmds */ rdev->mode_info.connector_table = CT_POWERBOOK_INTERNAL; - } else if (machine_is_compatible("PowerBook5,1") || - machine_is_compatible("PowerBook5,2") || - machine_is_compatible("PowerBook5,3") || - machine_is_compatible("PowerBook5,4") || - machine_is_compatible("PowerBook5,5")) { + } else if (of_machine_is_compatible("PowerBook5,1") || + of_machine_is_compatible("PowerBook5,2") || + of_machine_is_compatible("PowerBook5,3") || + of_machine_is_compatible("PowerBook5,4") || + of_machine_is_compatible("PowerBook5,5")) { /* powerbook with external single link tmds (sil164) */ rdev->mode_info.connector_table = CT_POWERBOOK_EXTERNAL; - } else if (machine_is_compatible("PowerBook5,6")) { + } else if (of_machine_is_compatible("PowerBook5,6")) { /* powerbook with external dual or single link tmds */ rdev->mode_info.connector_table = CT_POWERBOOK_EXTERNAL; - } else if (machine_is_compatible("PowerBook5,7") || - machine_is_compatible("PowerBook5,8") || - machine_is_compatible("PowerBook5,9")) { + } else if (of_machine_is_compatible("PowerBook5,7") || + of_machine_is_compatible("PowerBook5,8") || + of_machine_is_compatible("PowerBook5,9")) { /* PowerBook6,2 ? */ /* powerbook with external dual link tmds (sil1178?) */ rdev->mode_info.connector_table = CT_POWERBOOK_EXTERNAL; - } else if (machine_is_compatible("PowerBook4,1") || - machine_is_compatible("PowerBook4,2") || - machine_is_compatible("PowerBook4,3") || - machine_is_compatible("PowerBook6,3") || - machine_is_compatible("PowerBook6,5") || - machine_is_compatible("PowerBook6,7")) { + } else if (of_machine_is_compatible("PowerBook4,1") || + of_machine_is_compatible("PowerBook4,2") || + of_machine_is_compatible("PowerBook4,3") || + of_machine_is_compatible("PowerBook6,3") || + of_machine_is_compatible("PowerBook6,5") || + of_machine_is_compatible("PowerBook6,7")) { /* ibook */ rdev->mode_info.connector_table = CT_IBOOK; - } else if (machine_is_compatible("PowerMac4,4")) { + } else if (of_machine_is_compatible("PowerMac4,4")) { /* emac */ rdev->mode_info.connector_table = CT_EMAC; - } else if (machine_is_compatible("PowerMac10,1")) { + } else if (of_machine_is_compatible("PowerMac10,1")) { /* mini with internal tmds */ rdev->mode_info.connector_table = CT_MINI_INTERNAL; - } else if (machine_is_compatible("PowerMac10,2")) { + } else if (of_machine_is_compatible("PowerMac10,2")) { /* mini with external tmds */ rdev->mode_info.connector_table = CT_MINI_EXTERNAL; - } else if (machine_is_compatible("PowerMac12,1")) { + } else if (of_machine_is_compatible("PowerMac12,1")) { /* PowerMac8,1 ? */ /* imac g5 isight */ rdev->mode_info.connector_table = CT_IMAC_G5_ISIGHT; diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 2381885..65f8194 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -780,7 +780,7 @@ static enum drm_connector_status radeon_dvi_detect(struct drm_connector *connect * connected and the DVI port disconnected. If the edid doesn't * say HDMI, vice versa. */ - if (radeon_connector->shared_ddc && connector_status_connected) { + if (radeon_connector->shared_ddc && (ret == connector_status_connected)) { struct drm_device *dev = connector->dev; struct drm_connector *list_connector; struct radeon_connector *list_radeon_connector; @@ -1060,8 +1060,7 @@ radeon_add_atom_connector(struct drm_device *dev, return; } if (radeon_connector->ddc_bus && i2c_bus->valid) { - if (memcmp(&radeon_connector->ddc_bus->rec, i2c_bus, - sizeof(struct radeon_i2c_bus_rec)) == 0) { + if (radeon_connector->ddc_bus->rec.i2c_id == i2c_bus->i2c_id) { radeon_connector->shared_ddc = true; shared_ddc = true; } diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c index 1190148..e9d0850 100644 --- a/drivers/gpu/drm/radeon/radeon_cs.c +++ b/drivers/gpu/drm/radeon/radeon_cs.c @@ -86,7 +86,7 @@ int radeon_cs_parser_relocs(struct radeon_cs_parser *p) &p->validated); } } - return radeon_bo_list_validate(&p->validated, p->ib->fence); + return radeon_bo_list_validate(&p->validated); } int radeon_cs_parser_init(struct radeon_cs_parser *p, void *data) @@ -189,12 +189,10 @@ static void radeon_cs_parser_fini(struct radeon_cs_parser *parser, int error) { unsigned i; - if (error && parser->ib) { - radeon_bo_list_unvalidate(&parser->validated, - parser->ib->fence); - } else { - radeon_bo_list_unreserve(&parser->validated); + if (!error && parser->ib) { + radeon_bo_list_fence(&parser->validated, parser->ib->fence); } + radeon_bo_list_unreserve(&parser->validated); for (i = 0; i < parser->nrelocs; i++) { if (parser->relocs[i].gobj) { mutex_lock(&parser->rdev->ddev->struct_mutex); diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h index e137852..c57ad60 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.h +++ b/drivers/gpu/drm/radeon/radeon_drv.h @@ -106,9 +106,10 @@ * 1.29- R500 3D cmd buffer support * 1.30- Add support for occlusion queries * 1.31- Add support for num Z pipes from GET_PARAM + * 1.32- fixes for rv740 setup */ #define DRIVER_MAJOR 1 -#define DRIVER_MINOR 31 +#define DRIVER_MINOR 32 #define DRIVER_PATCHLEVEL 0 enum radeon_cp_microcode_version { diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c index d72a71b..f1da370 100644 --- a/drivers/gpu/drm/radeon/radeon_object.c +++ b/drivers/gpu/drm/radeon/radeon_object.c @@ -306,11 +306,10 @@ void radeon_bo_list_unreserve(struct list_head *head) } } -int radeon_bo_list_validate(struct list_head *head, void *fence) +int radeon_bo_list_validate(struct list_head *head) { struct radeon_bo_list *lobj; struct radeon_bo *bo; - struct radeon_fence *old_fence = NULL; int r; r = radeon_bo_list_reserve(head); @@ -334,32 +333,27 @@ int radeon_bo_list_validate(struct list_head *head, void *fence) } lobj->gpu_offset = radeon_bo_gpu_offset(bo); lobj->tiling_flags = bo->tiling_flags; - if (fence) { - old_fence = (struct radeon_fence *)bo->tbo.sync_obj; - bo->tbo.sync_obj = radeon_fence_ref(fence); - bo->tbo.sync_obj_arg = NULL; - } - if (old_fence) { - radeon_fence_unref(&old_fence); - } } return 0; } -void radeon_bo_list_unvalidate(struct list_head *head, void *fence) +void radeon_bo_list_fence(struct list_head *head, void *fence) { struct radeon_bo_list *lobj; - struct radeon_fence *old_fence; - - if (fence) - list_for_each_entry(lobj, head, list) { - old_fence = to_radeon_fence(lobj->bo->tbo.sync_obj); - if (old_fence == fence) { - lobj->bo->tbo.sync_obj = NULL; - radeon_fence_unref(&old_fence); - } + struct radeon_bo *bo; + struct radeon_fence *old_fence = NULL; + + list_for_each_entry(lobj, head, list) { + bo = lobj->bo; + spin_lock(&bo->tbo.lock); + old_fence = (struct radeon_fence *)bo->tbo.sync_obj; + bo->tbo.sync_obj = radeon_fence_ref(fence); + bo->tbo.sync_obj_arg = NULL; + spin_unlock(&bo->tbo.lock); + if (old_fence) { + radeon_fence_unref(&old_fence); } - radeon_bo_list_unreserve(head); + } } int radeon_bo_fbdev_mmap(struct radeon_bo *bo, diff --git a/drivers/gpu/drm/radeon/radeon_object.h b/drivers/gpu/drm/radeon/radeon_object.h index a02f180..7ab43de 100644 --- a/drivers/gpu/drm/radeon/radeon_object.h +++ b/drivers/gpu/drm/radeon/radeon_object.h @@ -156,8 +156,8 @@ extern void radeon_bo_list_add_object(struct radeon_bo_list *lobj, struct list_head *head); extern int radeon_bo_list_reserve(struct list_head *head); extern void radeon_bo_list_unreserve(struct list_head *head); -extern int radeon_bo_list_validate(struct list_head *head, void *fence); -extern void radeon_bo_list_unvalidate(struct list_head *head, void *fence); +extern int radeon_bo_list_validate(struct list_head *head); +extern void radeon_bo_list_fence(struct list_head *head, void *fence); extern int radeon_bo_fbdev_mmap(struct radeon_bo *bo, struct vm_area_struct *vma); extern int radeon_bo_set_tiling_flags(struct radeon_bo *bo, diff --git a/drivers/gpu/drm/radeon/radeon_ring.c b/drivers/gpu/drm/radeon/radeon_ring.c index 4d12b2d..6579eb4 100644 --- a/drivers/gpu/drm/radeon/radeon_ring.c +++ b/drivers/gpu/drm/radeon/radeon_ring.c @@ -41,68 +41,55 @@ int radeon_ib_get(struct radeon_device *rdev, struct radeon_ib **ib) { struct radeon_fence *fence; struct radeon_ib *nib; - unsigned long i; - int r = 0; + int r = 0, i, c; *ib = NULL; r = radeon_fence_create(rdev, &fence); if (r) { - DRM_ERROR("failed to create fence for new IB\n"); + dev_err(rdev->dev, "failed to create fence for new IB\n"); return r; } mutex_lock(&rdev->ib_pool.mutex); - i = find_first_zero_bit(rdev->ib_pool.alloc_bm, RADEON_IB_POOL_SIZE); - if (i < RADEON_IB_POOL_SIZE) { - set_bit(i, rdev->ib_pool.alloc_bm); - rdev->ib_pool.ibs[i].length_dw = 0; - *ib = &rdev->ib_pool.ibs[i]; - mutex_unlock(&rdev->ib_pool.mutex); - goto out; + for (i = rdev->ib_pool.head_id, c = 0, nib = NULL; c < RADEON_IB_POOL_SIZE; c++, i++) { + i &= (RADEON_IB_POOL_SIZE - 1); + if (rdev->ib_pool.ibs[i].free) { + nib = &rdev->ib_pool.ibs[i]; + break; + } } - if (list_empty(&rdev->ib_pool.scheduled_ibs)) { - /* we go do nothings here */ + if (nib == NULL) { + /* This should never happen, it means we allocated all + * IB and haven't scheduled one yet, return EBUSY to + * userspace hoping that on ioctl recall we get better + * luck + */ + dev_err(rdev->dev, "no free indirect buffer !\n"); mutex_unlock(&rdev->ib_pool.mutex); - DRM_ERROR("all IB allocated none scheduled.\n"); - r = -EINVAL; - goto out; + radeon_fence_unref(&fence); + return -EBUSY; } - /* get the first ib on the scheduled list */ - nib = list_entry(rdev->ib_pool.scheduled_ibs.next, - struct radeon_ib, list); - if (nib->fence == NULL) { - /* we go do nothings here */ + rdev->ib_pool.head_id = (nib->idx + 1) & (RADEON_IB_POOL_SIZE - 1); + nib->free = false; + if (nib->fence) { mutex_unlock(&rdev->ib_pool.mutex); - DRM_ERROR("IB %lu scheduled without a fence.\n", nib->idx); - r = -EINVAL; - goto out; - } - mutex_unlock(&rdev->ib_pool.mutex); - - r = radeon_fence_wait(nib->fence, false); - if (r) { - DRM_ERROR("radeon: IB(%lu:0x%016lX:%u)\n", nib->idx, - (unsigned long)nib->gpu_addr, nib->length_dw); - DRM_ERROR("radeon: GPU lockup detected, fail to get a IB\n"); - goto out; + r = radeon_fence_wait(nib->fence, false); + if (r) { + dev_err(rdev->dev, "error waiting fence of IB(%u:0x%016lX:%u)\n", + nib->idx, (unsigned long)nib->gpu_addr, nib->length_dw); + mutex_lock(&rdev->ib_pool.mutex); + nib->free = true; + mutex_unlock(&rdev->ib_pool.mutex); + radeon_fence_unref(&fence); + return r; + } + mutex_lock(&rdev->ib_pool.mutex); } radeon_fence_unref(&nib->fence); - + nib->fence = fence; nib->length_dw = 0; - - /* scheduled list is accessed here */ - mutex_lock(&rdev->ib_pool.mutex); - list_del(&nib->list); - INIT_LIST_HEAD(&nib->list); mutex_unlock(&rdev->ib_pool.mutex); - *ib = nib; -out: - if (r) { - radeon_fence_unref(&fence); - } else { - (*ib)->fence = fence; - } - return r; + return 0; } void radeon_ib_free(struct radeon_device *rdev, struct radeon_ib **ib) @@ -113,19 +100,10 @@ void radeon_ib_free(struct radeon_device *rdev, struct radeon_ib **ib) if (tmp == NULL) { return; } - mutex_lock(&rdev->ib_pool.mutex); - if (!list_empty(&tmp->list) && !radeon_fence_signaled(tmp->fence)) { - /* IB is scheduled & not signaled don't do anythings */ - mutex_unlock(&rdev->ib_pool.mutex); - return; - } - list_del(&tmp->list); - INIT_LIST_HEAD(&tmp->list); - if (tmp->fence) + if (!tmp->fence->emited) radeon_fence_unref(&tmp->fence); - - tmp->length_dw = 0; - clear_bit(tmp->idx, rdev->ib_pool.alloc_bm); + mutex_lock(&rdev->ib_pool.mutex); + tmp->free = true; mutex_unlock(&rdev->ib_pool.mutex); } @@ -135,7 +113,7 @@ int radeon_ib_schedule(struct radeon_device *rdev, struct radeon_ib *ib) if (!ib->length_dw || !rdev->cp.ready) { /* TODO: Nothings in the ib we should report. */ - DRM_ERROR("radeon: couldn't schedule IB(%lu).\n", ib->idx); + DRM_ERROR("radeon: couldn't schedule IB(%u).\n", ib->idx); return -EINVAL; } @@ -148,7 +126,8 @@ int radeon_ib_schedule(struct radeon_device *rdev, struct radeon_ib *ib) radeon_ring_ib_execute(rdev, ib); radeon_fence_emit(rdev, ib->fence); mutex_lock(&rdev->ib_pool.mutex); - list_add_tail(&ib->list, &rdev->ib_pool.scheduled_ibs); + /* once scheduled IB is considered free and protected by the fence */ + ib->free = true; mutex_unlock(&rdev->ib_pool.mutex); radeon_ring_unlock_commit(rdev); return 0; @@ -164,7 +143,6 @@ int radeon_ib_pool_init(struct radeon_device *rdev) if (rdev->ib_pool.robj) return 0; /* Allocate 1M object buffer */ - INIT_LIST_HEAD(&rdev->ib_pool.scheduled_ibs); r = radeon_bo_create(rdev, NULL, RADEON_IB_POOL_SIZE*64*1024, true, RADEON_GEM_DOMAIN_GTT, &rdev->ib_pool.robj); @@ -195,9 +173,9 @@ int radeon_ib_pool_init(struct radeon_device *rdev) rdev->ib_pool.ibs[i].ptr = ptr + offset; rdev->ib_pool.ibs[i].idx = i; rdev->ib_pool.ibs[i].length_dw = 0; - INIT_LIST_HEAD(&rdev->ib_pool.ibs[i].list); + rdev->ib_pool.ibs[i].free = true; } - bitmap_zero(rdev->ib_pool.alloc_bm, RADEON_IB_POOL_SIZE); + rdev->ib_pool.head_id = 0; rdev->ib_pool.ready = true; DRM_INFO("radeon: ib pool ready.\n"); if (radeon_debugfs_ib_init(rdev)) { @@ -214,7 +192,6 @@ void radeon_ib_pool_fini(struct radeon_device *rdev) return; } mutex_lock(&rdev->ib_pool.mutex); - bitmap_zero(rdev->ib_pool.alloc_bm, RADEON_IB_POOL_SIZE); if (rdev->ib_pool.robj) { r = radeon_bo_reserve(rdev->ib_pool.robj, false); if (likely(r == 0)) { @@ -363,7 +340,7 @@ static int radeon_debugfs_ib_info(struct seq_file *m, void *data) if (ib == NULL) { return 0; } - seq_printf(m, "IB %04lu\n", ib->idx); + seq_printf(m, "IB %04u\n", ib->idx); seq_printf(m, "IB fence %p\n", ib->fence); seq_printf(m, "IB size %05u dwords\n", ib->length_dw); for (i = 0; i < ib->length_dw; i++) { diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index 5943d56..0302167 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -549,9 +549,12 @@ static void rv770_gpu_init(struct radeon_device *rdev) gb_tiling_config |= BANK_SWAPS(1); - backend_map = r700_get_tile_pipe_to_backend_map(rdev->config.rv770.max_tile_pipes, - rdev->config.rv770.max_backends, - (0xff << rdev->config.rv770.max_backends) & 0xff); + if (rdev->family == CHIP_RV740) + backend_map = 0x28; + else + backend_map = r700_get_tile_pipe_to_backend_map(rdev->config.rv770.max_tile_pipes, + rdev->config.rv770.max_backends, + (0xff << rdev->config.rv770.max_backends) & 0xff); gb_tiling_config |= BACKEND_MAP(backend_map); cc_gc_shader_pipe_config = diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c index e2123af..3d47a2c 100644 --- a/drivers/gpu/drm/ttm/ttm_tt.c +++ b/drivers/gpu/drm/ttm/ttm_tt.c @@ -196,14 +196,15 @@ EXPORT_SYMBOL(ttm_tt_populate); #ifdef CONFIG_X86 static inline int ttm_tt_set_page_caching(struct page *p, - enum ttm_caching_state c_state) + enum ttm_caching_state c_old, + enum ttm_caching_state c_new) { int ret = 0; if (PageHighMem(p)) return 0; - if (get_page_memtype(p) != -1) { + if (c_old != tt_cached) { /* p isn't in the default caching state, set it to * writeback first to free its current memtype. */ @@ -212,16 +213,17 @@ static inline int ttm_tt_set_page_caching(struct page *p, return ret; } - if (c_state == tt_wc) + if (c_new == tt_wc) ret = set_memory_wc((unsigned long) page_address(p), 1); - else if (c_state == tt_uncached) + else if (c_new == tt_uncached) ret = set_pages_uc(p, 1); return ret; } #else /* CONFIG_X86 */ static inline int ttm_tt_set_page_caching(struct page *p, - enum ttm_caching_state c_state) + enum ttm_caching_state c_old, + enum ttm_caching_state c_new) { return 0; } @@ -254,7 +256,9 @@ static int ttm_tt_set_caching(struct ttm_tt *ttm, for (i = 0; i < ttm->num_pages; ++i) { cur_page = ttm->pages[i]; if (likely(cur_page != NULL)) { - ret = ttm_tt_set_page_caching(cur_page, c_state); + ret = ttm_tt_set_page_caching(cur_page, + ttm->caching_state, + c_state); if (unlikely(ret != 0)) goto out_err; } @@ -268,7 +272,7 @@ out_err: for (j = 0; j < i; ++j) { cur_page = ttm->pages[j]; if (likely(cur_page != NULL)) { - (void)ttm_tt_set_page_caching(cur_page, + (void)ttm_tt_set_page_caching(cur_page, c_state, ttm->caching_state); } } diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c index a6e8f68..0c9c081 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c @@ -348,22 +348,19 @@ static int vmw_driver_load(struct drm_device *dev, unsigned long chipset) */ DRM_INFO("It appears like vesafb is loaded. " - "Ignore above error if any. Entering stealth mode.\n"); + "Ignore above error if any.\n"); ret = pci_request_region(dev->pdev, 2, "vmwgfx stealth probe"); if (unlikely(ret != 0)) { DRM_ERROR("Failed reserving the SVGA MMIO resource.\n"); goto out_no_device; } - vmw_kms_init(dev_priv); - vmw_overlay_init(dev_priv); - } else { - ret = vmw_request_device(dev_priv); - if (unlikely(ret != 0)) - goto out_no_device; - vmw_kms_init(dev_priv); - vmw_overlay_init(dev_priv); - vmw_fb_init(dev_priv); } + ret = vmw_request_device(dev_priv); + if (unlikely(ret != 0)) + goto out_no_device; + vmw_kms_init(dev_priv); + vmw_overlay_init(dev_priv); + vmw_fb_init(dev_priv); dev_priv->pm_nb.notifier_call = vmwgfx_pm_notifier; register_pm_notifier(&dev_priv->pm_nb); @@ -406,17 +403,15 @@ static int vmw_driver_unload(struct drm_device *dev) unregister_pm_notifier(&dev_priv->pm_nb); - if (!dev_priv->stealth) { - vmw_fb_close(dev_priv); - vmw_kms_close(dev_priv); - vmw_overlay_close(dev_priv); - vmw_release_device(dev_priv); - pci_release_regions(dev->pdev); - } else { - vmw_kms_close(dev_priv); - vmw_overlay_close(dev_priv); + vmw_fb_close(dev_priv); + vmw_kms_close(dev_priv); + vmw_overlay_close(dev_priv); + vmw_release_device(dev_priv); + if (dev_priv->stealth) pci_release_region(dev->pdev, 2); - } + else + pci_release_regions(dev->pdev); + if (dev_priv->capabilities & SVGA_CAP_IRQMASK) drm_irq_uninstall(dev_priv->dev); if (dev->devname == vmw_devname) @@ -585,11 +580,6 @@ static int vmw_master_set(struct drm_device *dev, int ret = 0; DRM_INFO("Master set.\n"); - if (dev_priv->stealth) { - ret = vmw_request_device(dev_priv); - if (unlikely(ret != 0)) - return ret; - } if (active) { BUG_ON(active != &dev_priv->fbdev_master); @@ -649,18 +639,11 @@ static void vmw_master_drop(struct drm_device *dev, ttm_lock_set_kill(&vmaster->lock, true, SIGTERM); - if (dev_priv->stealth) { - ret = ttm_bo_evict_mm(&dev_priv->bdev, TTM_PL_VRAM); - if (unlikely(ret != 0)) - DRM_ERROR("Unable to clean VRAM on master drop.\n"); - vmw_release_device(dev_priv); - } dev_priv->active_master = &dev_priv->fbdev_master; ttm_lock_set_kill(&dev_priv->fbdev_master.lock, false, SIGTERM); ttm_vt_unlock(&dev_priv->fbdev_master.lock); - if (!dev_priv->stealth) - vmw_fb_on(dev_priv); + vmw_fb_on(dev_priv); } diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c index d69caf9..0897359 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c @@ -182,25 +182,19 @@ static int vmw_cmd_present_check(struct vmw_private *dev_priv, return vmw_cmd_sid_check(dev_priv, sw_context, &cmd->body.sid); } -static int vmw_cmd_dma(struct vmw_private *dev_priv, - struct vmw_sw_context *sw_context, - SVGA3dCmdHeader *header) +static int vmw_translate_guest_ptr(struct vmw_private *dev_priv, + struct vmw_sw_context *sw_context, + SVGAGuestPtr *ptr, + struct vmw_dma_buffer **vmw_bo_p) { - uint32_t handle; struct vmw_dma_buffer *vmw_bo = NULL; struct ttm_buffer_object *bo; - struct vmw_surface *srf = NULL; - struct vmw_dma_cmd { - SVGA3dCmdHeader header; - SVGA3dCmdSurfaceDMA dma; - } *cmd; + uint32_t handle = ptr->gmrId; struct vmw_relocation *reloc; - int ret; uint32_t cur_validate_node; struct ttm_validate_buffer *val_buf; + int ret; - cmd = container_of(header, struct vmw_dma_cmd, header); - handle = cmd->dma.guest.ptr.gmrId; ret = vmw_user_dmabuf_lookup(sw_context->tfile, handle, &vmw_bo); if (unlikely(ret != 0)) { DRM_ERROR("Could not find or use GMR region.\n"); @@ -209,14 +203,14 @@ static int vmw_cmd_dma(struct vmw_private *dev_priv, bo = &vmw_bo->base; if (unlikely(sw_context->cur_reloc >= VMWGFX_MAX_RELOCATIONS)) { - DRM_ERROR("Max number of DMA commands per submission" + DRM_ERROR("Max number relocations per submission" " exceeded\n"); ret = -EINVAL; goto out_no_reloc; } reloc = &sw_context->relocs[sw_context->cur_reloc++]; - reloc->location = &cmd->dma.guest.ptr; + reloc->location = ptr; cur_validate_node = vmw_dmabuf_validate_node(bo, sw_context->cur_val_buf); if (unlikely(cur_validate_node >= VMWGFX_MAX_GMRS)) { @@ -234,7 +228,89 @@ static int vmw_cmd_dma(struct vmw_private *dev_priv, list_add_tail(&val_buf->head, &sw_context->validate_nodes); ++sw_context->cur_val_buf; } + *vmw_bo_p = vmw_bo; + return 0; + +out_no_reloc: + vmw_dmabuf_unreference(&vmw_bo); + vmw_bo_p = NULL; + return ret; +} + +static int vmw_cmd_end_query(struct vmw_private *dev_priv, + struct vmw_sw_context *sw_context, + SVGA3dCmdHeader *header) +{ + struct vmw_dma_buffer *vmw_bo; + struct vmw_query_cmd { + SVGA3dCmdHeader header; + SVGA3dCmdEndQuery q; + } *cmd; + int ret; + + cmd = container_of(header, struct vmw_query_cmd, header); + ret = vmw_cmd_cid_check(dev_priv, sw_context, header); + if (unlikely(ret != 0)) + return ret; + + ret = vmw_translate_guest_ptr(dev_priv, sw_context, + &cmd->q.guestResult, + &vmw_bo); + if (unlikely(ret != 0)) + return ret; + + vmw_dmabuf_unreference(&vmw_bo); + return 0; +} +static int vmw_cmd_wait_query(struct vmw_private *dev_priv, + struct vmw_sw_context *sw_context, + SVGA3dCmdHeader *header) +{ + struct vmw_dma_buffer *vmw_bo; + struct vmw_query_cmd { + SVGA3dCmdHeader header; + SVGA3dCmdWaitForQuery q; + } *cmd; + int ret; + + cmd = container_of(header, struct vmw_query_cmd, header); + ret = vmw_cmd_cid_check(dev_priv, sw_context, header); + if (unlikely(ret != 0)) + return ret; + + ret = vmw_translate_guest_ptr(dev_priv, sw_context, + &cmd->q.guestResult, + &vmw_bo); + if (unlikely(ret != 0)) + return ret; + + vmw_dmabuf_unreference(&vmw_bo); + return 0; +} + + +static int vmw_cmd_dma(struct vmw_private *dev_priv, + struct vmw_sw_context *sw_context, + SVGA3dCmdHeader *header) +{ + struct vmw_dma_buffer *vmw_bo = NULL; + struct ttm_buffer_object *bo; + struct vmw_surface *srf = NULL; + struct vmw_dma_cmd { + SVGA3dCmdHeader header; + SVGA3dCmdSurfaceDMA dma; + } *cmd; + int ret; + + cmd = container_of(header, struct vmw_dma_cmd, header); + ret = vmw_translate_guest_ptr(dev_priv, sw_context, + &cmd->dma.guest.ptr, + &vmw_bo); + if (unlikely(ret != 0)) + return ret; + + bo = &vmw_bo->base; ret = vmw_user_surface_lookup_handle(dev_priv, sw_context->tfile, cmd->dma.host.sid, &srf); if (ret) { @@ -379,8 +455,8 @@ static vmw_cmd_func vmw_cmd_funcs[SVGA_3D_CMD_MAX] = { VMW_CMD_DEF(SVGA_3D_CMD_DRAW_PRIMITIVES, &vmw_cmd_draw), VMW_CMD_DEF(SVGA_3D_CMD_SETSCISSORRECT, &vmw_cmd_cid_check), VMW_CMD_DEF(SVGA_3D_CMD_BEGIN_QUERY, &vmw_cmd_cid_check), - VMW_CMD_DEF(SVGA_3D_CMD_END_QUERY, &vmw_cmd_cid_check), - VMW_CMD_DEF(SVGA_3D_CMD_WAIT_FOR_QUERY, &vmw_cmd_cid_check), + VMW_CMD_DEF(SVGA_3D_CMD_END_QUERY, &vmw_cmd_end_query), + VMW_CMD_DEF(SVGA_3D_CMD_WAIT_FOR_QUERY, &vmw_cmd_wait_query), VMW_CMD_DEF(SVGA_3D_CMD_PRESENT_READBACK, &vmw_cmd_ok), VMW_CMD_DEF(SVGA_3D_CMD_BLIT_SURFACE_TO_SCREEN, &vmw_cmd_blt_surf_screen_check) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c index 4f4f643..a933670 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c @@ -559,6 +559,9 @@ int vmw_fb_init(struct vmw_private *vmw_priv) info->pixmap.scan_align = 1; #endif + info->aperture_base = vmw_priv->vram_start; + info->aperture_size = vmw_priv->vram_size; + /* * Dirty & Deferred IO */ diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c index 24b56dc..2f6cf69 100644 --- a/drivers/gpu/vga/vgaarb.c +++ b/drivers/gpu/vga/vgaarb.c @@ -961,7 +961,7 @@ static ssize_t vga_arb_write(struct file *file, const char __user * buf, remaining -= 7; pr_devel("client 0x%p called 'target'\n", priv); /* if target is default */ - if (!strncmp(kbuf, "default", 7)) + if (!strncmp(curr_pos, "default", 7)) pdev = pci_dev_get(vga_default_device()); else { if (!vga_pci_str_to_vars(curr_pos, remaining, diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 24d90ea..71d4c07 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -55,6 +55,12 @@ source "drivers/hid/usbhid/Kconfig" menu "Special HID drivers" depends on HID +config HID_3M_PCT + tristate "3M PCT" + depends on USB_HID + ---help--- + Support for 3M PCT touch screens. + config HID_A4TECH tristate "A4 tech" if EMBEDDED depends on USB_HID @@ -183,6 +189,23 @@ config LOGIRUMBLEPAD2_FF Say Y here if you want to enable force feedback support for Logitech Rumblepad 2 devices. +config LOGIG940_FF + bool "Logitech Flight System G940 force feedback support" + depends on HID_LOGITECH + select INPUT_FF_MEMLESS + help + Say Y here if you want to enable force feedback support for Logitech + Flight System G940 devices. + +config HID_MAGICMOUSE + tristate "Apple MagicMouse multi-touch support" + depends on BT_HIDP + ---help--- + Support for the Apple Magic Mouse multi-touch. + + Say Y here if you want support for the multi-touch features of the + Apple Wireless "Magic" Mouse. + config HID_MICROSOFT tristate "Microsoft" if EMBEDDED depends on USB_HID @@ -190,6 +213,12 @@ config HID_MICROSOFT ---help--- Support for Microsoft devices that are not fully compliant with HID standard. +config HID_MOSART + tristate "MosArt" + depends on USB_HID + ---help--- + Support for MosArt dual-touch panels. + config HID_MONTEREY tristate "Monterey" if EMBEDDED depends on USB_HID @@ -198,12 +227,18 @@ config HID_MONTEREY Support for Monterey Genius KB29E. config HID_NTRIG - tristate "NTrig" if EMBEDDED + tristate "NTrig" depends on USB_HID - default !EMBEDDED ---help--- Support for N-Trig touch screen. +config HID_ORTEK + tristate "Ortek" if EMBEDDED + depends on USB_HID + default !EMBEDDED + ---help--- + Support for Ortek WKB-2000 wireless keyboard + mouse trackpad. + config HID_PANTHERLORD tristate "Pantherlord support" if EMBEDDED depends on USB_HID @@ -227,6 +262,12 @@ config HID_PETALYNX ---help--- Support for Petalynx Maxter remote control. +config HID_QUANTA + tristate "Quanta Optical Touch" + depends on USB_HID + ---help--- + Support for Quanta Optical Touch dual-touch panels. + config HID_SAMSUNG tristate "Samsung" if EMBEDDED depends on USB_HID @@ -241,6 +282,12 @@ config HID_SONY ---help--- Support for Sony PS3 controller. +config HID_STANTUM + tristate "Stantum" + depends on USB_HID + ---help--- + Support for Stantum multitouch panel. + config HID_SUNPLUS tristate "Sunplus" if EMBEDDED depends on USB_HID @@ -305,9 +352,8 @@ config THRUSTMASTER_FF Rumble Force or Force Feedback Wheel. config HID_WACOM - tristate "Wacom Bluetooth devices support" if EMBEDDED + tristate "Wacom Bluetooth devices support" depends on BT_HIDP - default !EMBEDDED ---help--- Support for Wacom Graphire Bluetooth tablet. diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile index 0de2dff..0b2618f 100644 --- a/drivers/hid/Makefile +++ b/drivers/hid/Makefile @@ -18,7 +18,11 @@ endif ifdef CONFIG_LOGIRUMBLEPAD2_FF hid-logitech-objs += hid-lg2ff.o endif +ifdef CONFIG_LOGIG940_FF + hid-logitech-objs += hid-lg3ff.o +endif +obj-$(CONFIG_HID_3M_PCT) += hid-3m-pct.o obj-$(CONFIG_HID_A4TECH) += hid-a4tech.o obj-$(CONFIG_HID_APPLE) += hid-apple.o obj-$(CONFIG_HID_BELKIN) += hid-belkin.o @@ -31,14 +35,19 @@ obj-$(CONFIG_HID_GYRATION) += hid-gyration.o obj-$(CONFIG_HID_KENSINGTON) += hid-kensington.o obj-$(CONFIG_HID_KYE) += hid-kye.o obj-$(CONFIG_HID_LOGITECH) += hid-logitech.o +obj-$(CONFIG_HID_MAGICMOUSE) += hid-magicmouse.o obj-$(CONFIG_HID_MICROSOFT) += hid-microsoft.o obj-$(CONFIG_HID_MONTEREY) += hid-monterey.o +obj-$(CONFIG_HID_MOSART) += hid-mosart.o obj-$(CONFIG_HID_NTRIG) += hid-ntrig.o +obj-$(CONFIG_HID_ORTEK) += hid-ortek.o +obj-$(CONFIG_HID_QUANTA) += hid-quanta.o obj-$(CONFIG_HID_PANTHERLORD) += hid-pl.o obj-$(CONFIG_HID_PETALYNX) += hid-petalynx.o obj-$(CONFIG_HID_SAMSUNG) += hid-samsung.o obj-$(CONFIG_HID_SMARTJOYPLUS) += hid-sjoy.o obj-$(CONFIG_HID_SONY) += hid-sony.o +obj-$(CONFIG_HID_STANTUM) += hid-stantum.o obj-$(CONFIG_HID_SUNPLUS) += hid-sunplus.o obj-$(CONFIG_HID_GREENASIA) += hid-gaff.o obj-$(CONFIG_HID_THRUSTMASTER) += hid-tmff.o diff --git a/drivers/hid/hid-3m-pct.c b/drivers/hid/hid-3m-pct.c new file mode 100644 index 0000000..2370aef --- /dev/null +++ b/drivers/hid/hid-3m-pct.c @@ -0,0 +1,290 @@ +/* + * HID driver for 3M PCT multitouch panels + * + * Copyright (c) 2009 Stephane Chatty <chatty@enac.fr> + * + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include <linux/device.h> +#include <linux/hid.h> +#include <linux/module.h> +#include <linux/usb.h> + +MODULE_AUTHOR("Stephane Chatty <chatty@enac.fr>"); +MODULE_DESCRIPTION("3M PCT multitouch panels"); +MODULE_LICENSE("GPL"); + +#include "hid-ids.h" + +struct mmm_finger { + __s32 x, y; + __u8 rank; + bool touch, valid; +}; + +struct mmm_data { + struct mmm_finger f[10]; + __u8 curid, num; + bool touch, valid; +}; + +static int mmm_input_mapping(struct hid_device *hdev, struct hid_input *hi, + struct hid_field *field, struct hid_usage *usage, + unsigned long **bit, int *max) +{ + switch (usage->hid & HID_USAGE_PAGE) { + + case HID_UP_BUTTON: + return -1; + + case HID_UP_GENDESK: + switch (usage->hid) { + case HID_GD_X: + hid_map_usage(hi, usage, bit, max, + EV_ABS, ABS_MT_POSITION_X); + /* touchscreen emulation */ + input_set_abs_params(hi->input, ABS_X, + field->logical_minimum, + field->logical_maximum, 0, 0); + return 1; + case HID_GD_Y: + hid_map_usage(hi, usage, bit, max, + EV_ABS, ABS_MT_POSITION_Y); + /* touchscreen emulation */ + input_set_abs_params(hi->input, ABS_Y, + field->logical_minimum, + field->logical_maximum, 0, 0); + return 1; + } + return 0; + + case HID_UP_DIGITIZER: + switch (usage->hid) { + /* we do not want to map these: no input-oriented meaning */ + case 0x14: + case 0x23: + case HID_DG_INPUTMODE: + case HID_DG_DEVICEINDEX: + case HID_DG_CONTACTCOUNT: + case HID_DG_CONTACTMAX: + case HID_DG_INRANGE: + case HID_DG_CONFIDENCE: + return -1; + case HID_DG_TIPSWITCH: + /* touchscreen emulation */ + hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH); + return 1; + case HID_DG_CONTACTID: + hid_map_usage(hi, usage, bit, max, + EV_ABS, ABS_MT_TRACKING_ID); + return 1; + } + /* let hid-input decide for the others */ + return 0; + + case 0xff000000: + /* we do not want to map these: no input-oriented meaning */ + return -1; + } + + return 0; +} + +static int mmm_input_mapped(struct hid_device *hdev, struct hid_input *hi, + struct hid_field *field, struct hid_usage *usage, + unsigned long **bit, int *max) +{ + if (usage->type == EV_KEY || usage->type == EV_ABS) + clear_bit(usage->code, *bit); + + return 0; +} + +/* + * this function is called when a whole packet has been received and processed, + * so that it can decide what to send to the input layer. + */ +static void mmm_filter_event(struct mmm_data *md, struct input_dev *input) +{ + struct mmm_finger *oldest = 0; + bool pressed = false, released = false; + int i; + + /* + * we need to iterate on all fingers to decide if we have a press + * or a release event in our touchscreen emulation. + */ + for (i = 0; i < 10; ++i) { + struct mmm_finger *f = &md->f[i]; + if (!f->valid) { + /* this finger is just placeholder data, ignore */ + } else if (f->touch) { + /* this finger is on the screen */ + input_event(input, EV_ABS, ABS_MT_TRACKING_ID, i); + input_event(input, EV_ABS, ABS_MT_POSITION_X, f->x); + input_event(input, EV_ABS, ABS_MT_POSITION_Y, f->y); + input_mt_sync(input); + /* + * touchscreen emulation: maintain the age rank + * of this finger, decide if we have a press + */ + if (f->rank == 0) { + f->rank = ++(md->num); + if (f->rank == 1) + pressed = true; + } + if (f->rank == 1) + oldest = f; + } else { + /* this finger took off the screen */ + /* touchscreen emulation: maintain age rank of others */ + int j; + + for (j = 0; j < 10; ++j) { + struct mmm_finger *g = &md->f[j]; + if (g->rank > f->rank) { + g->rank--; + if (g->rank == 1) + oldest = g; + } + } + f->rank = 0; + --(md->num); + if (md->num == 0) + released = true; + } + f->valid = 0; + } + + /* touchscreen emulation */ + if (oldest) { + if (pressed) + input_event(input, EV_KEY, BTN_TOUCH, 1); + input_event(input, EV_ABS, ABS_X, oldest->x); + input_event(input, EV_ABS, ABS_Y, oldest->y); + } else if (released) { + input_event(input, EV_KEY, BTN_TOUCH, 0); + } +} + +/* + * this function is called upon all reports + * so that we can accumulate contact point information, + * and call input_mt_sync after each point. + */ +static int mmm_event(struct hid_device *hid, struct hid_field *field, + struct hid_usage *usage, __s32 value) +{ + struct mmm_data *md = hid_get_drvdata(hid); + /* + * strangely, this function can be called before + * field->hidinput is initialized! + */ + if (hid->claimed & HID_CLAIMED_INPUT) { + struct input_dev *input = field->hidinput->input; + switch (usage->hid) { + case HID_DG_TIPSWITCH: + md->touch = value; + break; + case HID_DG_CONFIDENCE: + md->valid = value; + break; + case HID_DG_CONTACTID: + if (md->valid) { + md->curid = value; + md->f[value].touch = md->touch; + md->f[value].valid = 1; + } + break; + case HID_GD_X: + if (md->valid) + md->f[md->curid].x = value; + break; + case HID_GD_Y: + if (md->valid) + md->f[md->curid].y = value; + break; + case HID_DG_CONTACTCOUNT: + mmm_filter_event(md, input); + break; + } + } + + /* we have handled the hidinput part, now remains hiddev */ + if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event) + hid->hiddev_hid_event(hid, field, usage, value); + + return 1; +} + +static int mmm_probe(struct hid_device *hdev, const struct hid_device_id *id) +{ + int ret; + struct mmm_data *md; + + md = kzalloc(sizeof(struct mmm_data), GFP_KERNEL); + if (!md) { + dev_err(&hdev->dev, "cannot allocate 3M data\n"); + return -ENOMEM; + } + hid_set_drvdata(hdev, md); + + ret = hid_parse(hdev); + if (!ret) + ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT); + + if (ret) + kfree(md); + return ret; +} + +static void mmm_remove(struct hid_device *hdev) +{ + hid_hw_stop(hdev); + kfree(hid_get_drvdata(hdev)); + hid_set_drvdata(hdev, NULL); +} + +static const struct hid_device_id mmm_devices[] = { + { HID_USB_DEVICE(USB_VENDOR_ID_3M, USB_DEVICE_ID_3M1968) }, + { } +}; +MODULE_DEVICE_TABLE(hid, mmm_devices); + +static const struct hid_usage_id mmm_grabbed_usages[] = { + { HID_ANY_ID, HID_ANY_ID, HID_ANY_ID }, + { HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1} +}; + +static struct hid_driver mmm_driver = { + .name = "3m-pct", + .id_table = mmm_devices, + .probe = mmm_probe, + .remove = mmm_remove, + .input_mapping = mmm_input_mapping, + .input_mapped = mmm_input_mapped, + .usage_table = mmm_grabbed_usages, + .event = mmm_event, +}; + +static int __init mmm_init(void) +{ + return hid_register_driver(&mmm_driver); +} + +static void __exit mmm_exit(void) +{ + hid_unregister_driver(&mmm_driver); +} + +module_init(mmm_init); +module_exit(mmm_exit); +MODULE_LICENSE("GPL"); + diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c index 5b4d66d..78286b1 100644 --- a/drivers/hid/hid-apple.c +++ b/drivers/hid/hid-apple.c @@ -40,6 +40,11 @@ module_param(fnmode, uint, 0644); MODULE_PARM_DESC(fnmode, "Mode of fn key on Apple keyboards (0 = disabled, " "[1] = fkeyslast, 2 = fkeysfirst)"); +static unsigned int iso_layout = 1; +module_param(iso_layout, uint, 0644); +MODULE_PARM_DESC(iso_layout, "Enable/Disable hardcoded ISO-layout of the keyboard. " + "(0 = disabled, [1] = enabled)"); + struct apple_sc { unsigned long quirks; unsigned int fn_on; @@ -199,11 +204,13 @@ static int hidinput_apple_event(struct hid_device *hid, struct input_dev *input, } } - if (asc->quirks & APPLE_ISO_KEYBOARD) { - trans = apple_find_translation(apple_iso_keyboard, usage->code); - if (trans) { - input_event(input, usage->type, trans->to, value); - return 1; + if (iso_layout) { + if (asc->quirks & APPLE_ISO_KEYBOARD) { + trans = apple_find_translation(apple_iso_keyboard, usage->code); + if (trans) { + input_event(input, usage->type, trans->to, value); + return 1; + } } } diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index eabe5f8..368fbb0 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -4,7 +4,7 @@ * Copyright (c) 1999 Andreas Gal * Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz> * Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc - * Copyright (c) 2006-2007 Jiri Kosina + * Copyright (c) 2006-2010 Jiri Kosina */ /* @@ -51,7 +51,7 @@ EXPORT_SYMBOL_GPL(hid_debug); * Register a new report for a device. */ -static struct hid_report *hid_register_report(struct hid_device *device, unsigned type, unsigned id) +struct hid_report *hid_register_report(struct hid_device *device, unsigned type, unsigned id) { struct hid_report_enum *report_enum = device->report_enum + type; struct hid_report *report; @@ -75,6 +75,7 @@ static struct hid_report *hid_register_report(struct hid_device *device, unsigne return report; } +EXPORT_SYMBOL_GPL(hid_register_report); /* * Register a new field for this report. @@ -387,7 +388,8 @@ static int hid_parser_local(struct hid_parser *parser, struct hid_item *item) __u32 data; unsigned n; - if (item->size == 0) { + /* Local delimiter could have value 0, which allows size to be 0 */ + if (item->size == 0 && item->tag != HID_LOCAL_ITEM_TAG_DELIMITER) { dbg_hid("item data expected for local item\n"); return -1; } @@ -1248,11 +1250,13 @@ EXPORT_SYMBOL_GPL(hid_disconnect); /* a list of devices for which there is a specialized driver on HID bus */ static const struct hid_device_id hid_blacklist[] = { + { HID_USB_DEVICE(USB_VENDOR_ID_3M, USB_DEVICE_ID_3M1968) }, { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU) }, { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_X5_005D) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ATV_IRCONTROL) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL4) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MIGHTYMOUSE) }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MAGICMOUSE) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ISO) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ANSI) }, @@ -1324,6 +1328,7 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WINGMAN_F3D) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WINGMAN_FFG ) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_FORCE3D_PRO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_FLIGHT_SYSTEM_G940) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL2) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G25_WHEEL) }, @@ -1337,10 +1342,15 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_WIRELESS_OPTICAL_DESKTOP_3_0) }, { HID_USB_DEVICE(USB_VENDOR_ID_MONTEREY, USB_DEVICE_ID_GENIUS_KB29E) }, { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN) }, + { HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_WKB2000) }, { HID_USB_DEVICE(USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE) }, + { HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH) }, + { HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN) }, { HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_IR_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) }, { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE) }, + { HID_USB_DEVICE(USB_VENDOR_ID_STANTUM, USB_DEVICE_ID_MTP) }, { HID_USB_DEVICE(USB_VENDOR_ID_SUNPLUS, USB_DEVICE_ID_SUNPLUS_WDESKTOP) }, { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb300) }, { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb304) }, @@ -1543,8 +1553,9 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_24) }, { HID_USB_DEVICE(USB_VENDOR_ID_AIRCABLE, USB_DEVICE_ID_AIRCABLE1) }, { HID_USB_DEVICE(USB_VENDOR_ID_ALCOR, USB_DEVICE_ID_ALCOR_USBRS232) }, - { HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_LCM)}, - { HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_LCM2)}, + { HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_T91MT)}, + { HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_LCM)}, + { HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_LCM2)}, { HID_USB_DEVICE(USB_VENDOR_ID_AVERMEDIA, USB_DEVICE_ID_AVER_FM_MR800) }, { HID_USB_DEVICE(USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD) }, { HID_USB_DEVICE(USB_VENDOR_ID_CIDC, 0x0103) }, @@ -1661,8 +1672,6 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0004) }, { HID_USB_DEVICE(USB_VENDOR_ID_PHILIPS, USB_DEVICE_ID_PHILIPS_IEEE802154_DONGLE) }, { HID_USB_DEVICE(USB_VENDOR_ID_POWERCOM, USB_DEVICE_ID_POWERCOM_UPS) }, - { HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY1) }, - { HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY2) }, { HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO) }, { HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP) }, { HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP) }, diff --git a/drivers/hid/hid-debug.c b/drivers/hid/hid-debug.c index 6abd036..cd4ece6 100644 --- a/drivers/hid/hid-debug.c +++ b/drivers/hid/hid-debug.c @@ -864,13 +864,13 @@ static const char **names[EV_MAX + 1] = { [EV_SND] = sounds, [EV_REP] = repeats, }; -void hid_resolv_event(__u8 type, __u16 code, struct seq_file *f) { - +static void hid_resolv_event(__u8 type, __u16 code, struct seq_file *f) +{ seq_printf(f, "%s.%s", events[type] ? events[type] : "?", names[type] ? (names[type][code] ? names[type][code] : "?") : "?"); } -void hid_dump_input_mapping(struct hid_device *hid, struct seq_file *f) +static void hid_dump_input_mapping(struct hid_device *hid, struct seq_file *f) { int i, j, k; struct hid_report *report; diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 010368e..72c05f9 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -18,6 +18,9 @@ #ifndef HID_IDS_H_FILE #define HID_IDS_H_FILE +#define USB_VENDOR_ID_3M 0x0596 +#define USB_DEVICE_ID_3M1968 0x0500 + #define USB_VENDOR_ID_A4TECH 0x09da #define USB_DEVICE_ID_A4TECH_WCP32PU 0x0006 #define USB_DEVICE_ID_A4TECH_X5_005D 0x000a @@ -56,6 +59,7 @@ #define USB_VENDOR_ID_APPLE 0x05ac #define USB_DEVICE_ID_APPLE_MIGHTYMOUSE 0x0304 +#define USB_DEVICE_ID_APPLE_MAGICMOUSE 0x030d #define USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI 0x020e #define USB_DEVICE_ID_APPLE_FOUNTAIN_ISO 0x020f #define USB_DEVICE_ID_APPLE_GEYSER_ANSI 0x0214 @@ -96,9 +100,12 @@ #define USB_DEVICE_ID_APPLE_ATV_IRCONTROL 0x8241 #define USB_DEVICE_ID_APPLE_IRCONTROL4 0x8242 -#define USB_VENDOR_ID_ASUS 0x0b05 -#define USB_DEVICE_ID_ASUS_LCM 0x1726 -#define USB_DEVICE_ID_ASUS_LCM2 0x175b +#define USB_VENDOR_ID_ASUS 0x0486 +#define USB_DEVICE_ID_ASUS_T91MT 0x0185 + +#define USB_VENDOR_ID_ASUSTEK 0x0b05 +#define USB_DEVICE_ID_ASUSTEK_LCM 0x1726 +#define USB_DEVICE_ID_ASUSTEK_LCM2 0x175b #define USB_VENDOR_ID_ATEN 0x0557 #define USB_DEVICE_ID_ATEN_UC100KM 0x2004 @@ -169,6 +176,9 @@ #define USB_VENDOR_ID_ESSENTIAL_REALITY 0x0d7f #define USB_DEVICE_ID_ESSENTIAL_REALITY_P5 0x0100 +#define USB_VENDOR_ID_ETURBOTOUCH 0x22b9 +#define USB_DEVICE_ID_ETURBOTOUCH 0x0006 + #define USB_VENDOR_ID_ETT 0x0664 #define USB_DEVICE_ID_TC5UH 0x0309 @@ -303,6 +313,7 @@ #define USB_DEVICE_ID_LOGITECH_RUMBLEPAD2_2 0xc219 #define USB_DEVICE_ID_LOGITECH_WINGMAN_F3D 0xc283 #define USB_DEVICE_ID_LOGITECH_FORCE3D_PRO 0xc286 +#define USB_DEVICE_ID_LOGITECH_FLIGHT_SYSTEM_G940 0xc287 #define USB_DEVICE_ID_LOGITECH_WHEEL 0xc294 #define USB_DEVICE_ID_LOGITECH_WINGMAN_FFG 0xc293 #define USB_DEVICE_ID_LOGITECH_MOMO_WHEEL 0xc295 @@ -365,6 +376,9 @@ #define USB_VENDOR_ID_ONTRAK 0x0a07 #define USB_DEVICE_ID_ONTRAK_ADU100 0x0064 +#define USB_VENDOR_ID_ORTEK 0x05a4 +#define USB_DEVICE_ID_ORTEK_WKB2000 0x2000 + #define USB_VENDOR_ID_PANJIT 0x134c #define USB_VENDOR_ID_PANTHERLORD 0x0810 @@ -382,9 +396,16 @@ #define USB_VENDOR_ID_POWERCOM 0x0d9f #define USB_DEVICE_ID_POWERCOM_UPS 0x0002 +#define USB_VENDOR_ID_PRODIGE 0x05af +#define USB_DEVICE_ID_PRODIGE_CORDLESS 0x3062 + #define USB_VENDOR_ID_SAITEK 0x06a3 #define USB_DEVICE_ID_SAITEK_RUMBLEPAD 0xff17 +#define USB_VENDOR_ID_QUANTA 0x0408 +#define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH 0x3000 +#define USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN 0x3001 + #define USB_VENDOR_ID_SAMSUNG 0x0419 #define USB_DEVICE_ID_SAMSUNG_IR_REMOTE 0x0001 @@ -396,18 +417,20 @@ #define USB_DEVICE_ID_SOUNDGRAPH_IMON_FIRST 0x0034 #define USB_DEVICE_ID_SOUNDGRAPH_IMON_LAST 0x0046 +#define USB_VENDOR_ID_STANTUM 0x1f87 +#define USB_DEVICE_ID_MTP 0x0002 + #define USB_VENDOR_ID_SUN 0x0430 #define USB_DEVICE_ID_RARITAN_KVM_DONGLE 0xcdab #define USB_VENDOR_ID_SUNPLUS 0x04fc #define USB_DEVICE_ID_SUNPLUS_WDESKTOP 0x05d8 -#define USB_VENDOR_ID_TENX 0x1130 -#define USB_DEVICE_ID_TENX_IBUDDY1 0x0001 -#define USB_DEVICE_ID_TENX_IBUDDY2 0x0002 - #define USB_VENDOR_ID_THRUSTMASTER 0x044f +#define USB_VENDOR_ID_TOUCHPACK 0x1bfd +#define USB_DEVICE_ID_TOUCHPACK_RTS 0x1688 + #define USB_VENDOR_ID_TOPMAX 0x0663 #define USB_DEVICE_ID_TOPMAX_COBRAPAD 0x0103 diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c index 5862b0f..79d9edd 100644 --- a/drivers/hid/hid-input.c +++ b/drivers/hid/hid-input.c @@ -1,6 +1,6 @@ /* * Copyright (c) 2000-2001 Vojtech Pavlik - * Copyright (c) 2006-2007 Jiri Kosina + * Copyright (c) 2006-2010 Jiri Kosina * * HID to Linux Input mapping */ @@ -193,12 +193,17 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel break; case HID_UP_BUTTON: - code = ((usage->hid - 1) & 0xf); + code = ((usage->hid - 1) & HID_USAGE); switch (field->application) { case HID_GD_MOUSE: case HID_GD_POINTER: code += 0x110; break; - case HID_GD_JOYSTICK: code += 0x120; break; + case HID_GD_JOYSTICK: + if (code <= 0xf) + code += BTN_JOYSTICK; + else + code += BTN_TRIGGER_HAPPY; + break; case HID_GD_GAMEPAD: code += 0x130; break; default: switch (field->physical) { @@ -400,6 +405,7 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel case 0x192: map_key_clear(KEY_CALC); break; case 0x194: map_key_clear(KEY_FILE); break; case 0x196: map_key_clear(KEY_WWW); break; + case 0x199: map_key_clear(KEY_CHAT); break; case 0x19c: map_key_clear(KEY_LOGOFF); break; case 0x19e: map_key_clear(KEY_COFFEE); break; case 0x1a6: map_key_clear(KEY_HELP); break; diff --git a/drivers/hid/hid-lg.c b/drivers/hid/hid-lg.c index 9fcd3d0..3677c90 100644 --- a/drivers/hid/hid-lg.c +++ b/drivers/hid/hid-lg.c @@ -34,6 +34,7 @@ #define LG_FF 0x200 #define LG_FF2 0x400 #define LG_RDESC_REL_ABS 0x800 +#define LG_FF3 0x1000 /* * Certain Logitech keyboards send in report #3 keys which are far @@ -266,7 +267,7 @@ static int lg_probe(struct hid_device *hdev, const struct hid_device_id *id) goto err_free; } - if (quirks & (LG_FF | LG_FF2)) + if (quirks & (LG_FF | LG_FF2 | LG_FF3)) connect_mask &= ~HID_CONNECT_FF; ret = hid_hw_start(hdev, connect_mask); @@ -279,6 +280,8 @@ static int lg_probe(struct hid_device *hdev, const struct hid_device_id *id) lgff_init(hdev); if (quirks & LG_FF2) lg2ff_init(hdev); + if (quirks & LG_FF3) + lg3ff_init(hdev); return 0; err_free: @@ -331,6 +334,8 @@ static const struct hid_device_id lg_devices[] = { .driver_data = LG_FF }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2), .driver_data = LG_FF2 }, + { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_FLIGHT_SYSTEM_G940), + .driver_data = LG_FF3 }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACENAVIGATOR), .driver_data = LG_RDESC_REL_ABS }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACETRAVELLER), diff --git a/drivers/hid/hid-lg.h b/drivers/hid/hid-lg.h index bf31592..ce2ac86 100644 --- a/drivers/hid/hid-lg.h +++ b/drivers/hid/hid-lg.h @@ -13,4 +13,10 @@ int lg2ff_init(struct hid_device *hdev); static inline int lg2ff_init(struct hid_device *hdev) { return -1; } #endif +#ifdef CONFIG_LOGIG940_FF +int lg3ff_init(struct hid_device *hdev); +#else +static inline int lg3ff_init(struct hid_device *hdev) { return -1; } +#endif + #endif diff --git a/drivers/hid/hid-lg3ff.c b/drivers/hid/hid-lg3ff.c new file mode 100644 index 0000000..4002832 --- /dev/null +++ b/drivers/hid/hid-lg3ff.c @@ -0,0 +1,176 @@ +/* + * Force feedback support for Logitech Flight System G940 + * + * Copyright (c) 2009 Gary Stein <LordCnidarian@gmail.com> + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + + +#include <linux/input.h> +#include <linux/usb.h> +#include <linux/hid.h> + +#include "usbhid/usbhid.h" +#include "hid-lg.h" + +/* + * G940 Theory of Operation (from experimentation) + * + * There are 63 fields (only 3 of them currently used) + * 0 - seems to be command field + * 1 - 30 deal with the x axis + * 31 -60 deal with the y axis + * + * Field 1 is x axis constant force + * Field 31 is y axis constant force + * + * other interesting fields 1,2,3,4 on x axis + * (same for 31,32,33,34 on y axis) + * + * 0 0 127 127 makes the joystick autocenter hard + * + * 127 0 127 127 makes the joystick loose on the right, + * but stops all movemnt left + * + * -127 0 -127 -127 makes the joystick loose on the left, + * but stops all movement right + * + * 0 0 -127 -127 makes the joystick rattle very hard + * + * I'm sure these are effects that I don't know enough about them + */ + +struct lg3ff_device { + struct hid_report *report; +}; + +static int hid_lg3ff_play(struct input_dev *dev, void *data, + struct ff_effect *effect) +{ + struct hid_device *hid = input_get_drvdata(dev); + struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list; + struct hid_report *report = list_entry(report_list->next, struct hid_report, list); + int x, y; + +/* + * Maxusage should always be 63 (maximum fields) + * likely a better way to ensure this data is clean + */ + memset(report->field[0]->value, 0, sizeof(__s32)*report->field[0]->maxusage); + + switch (effect->type) { + case FF_CONSTANT: +/* + * Already clamped in ff_memless + * 0 is center (different then other logitech) + */ + x = effect->u.ramp.start_level; + y = effect->u.ramp.end_level; + + /* send command byte */ + report->field[0]->value[0] = 0x51; + +/* + * Sign backwards from other Force3d pro + * which get recast here in two's complement 8 bits + */ + report->field[0]->value[1] = (unsigned char)(-x); + report->field[0]->value[31] = (unsigned char)(-y); + + usbhid_submit_report(hid, report, USB_DIR_OUT); + break; + } + return 0; +} +static void hid_lg3ff_set_autocenter(struct input_dev *dev, u16 magnitude) +{ + struct hid_device *hid = input_get_drvdata(dev); + struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list; + struct hid_report *report = list_entry(report_list->next, struct hid_report, list); + +/* + * Auto Centering probed from device + * NOTE: deadman's switch on G940 must be covered + * for effects to work + */ + report->field[0]->value[0] = 0x51; + report->field[0]->value[1] = 0x00; + report->field[0]->value[2] = 0x00; + report->field[0]->value[3] = 0x7F; + report->field[0]->value[4] = 0x7F; + report->field[0]->value[31] = 0x00; + report->field[0]->value[32] = 0x00; + report->field[0]->value[33] = 0x7F; + report->field[0]->value[34] = 0x7F; + + usbhid_submit_report(hid, report, USB_DIR_OUT); +} + + +static const signed short ff3_joystick_ac[] = { + FF_CONSTANT, + FF_AUTOCENTER, + -1 +}; + +int lg3ff_init(struct hid_device *hid) +{ + struct hid_input *hidinput = list_entry(hid->inputs.next, struct hid_input, list); + struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list; + struct input_dev *dev = hidinput->input; + struct hid_report *report; + struct hid_field *field; + const signed short *ff_bits = ff3_joystick_ac; + int error; + int i; + + /* Find the report to use */ + if (list_empty(report_list)) { + err_hid("No output report found"); + return -1; + } + + /* Check that the report looks ok */ + report = list_entry(report_list->next, struct hid_report, list); + if (!report) { + err_hid("NULL output report"); + return -1; + } + + field = report->field[0]; + if (!field) { + err_hid("NULL field"); + return -1; + } + + /* Assume single fixed device G940 */ + for (i = 0; ff_bits[i] >= 0; i++) + set_bit(ff_bits[i], dev->ffbit); + + error = input_ff_create_memless(dev, NULL, hid_lg3ff_play); + if (error) + return error; + + if (test_bit(FF_AUTOCENTER, dev->ffbit)) + dev->ff->set_autocenter = hid_lg3ff_set_autocenter; + + dev_info(&hid->dev, "Force feedback for Logitech Flight System G940 by " + "Gary Stein <LordCnidarian@gmail.com>\n"); + return 0; +} + diff --git a/drivers/hid/hid-lgff.c b/drivers/hid/hid-lgff.c index 987abeb..61142b7 100644 --- a/drivers/hid/hid-lgff.c +++ b/drivers/hid/hid-lgff.c @@ -67,6 +67,7 @@ static const struct dev_type devices[] = { { 0x046d, 0xc219, ff_rumble }, { 0x046d, 0xc283, ff_joystick }, { 0x046d, 0xc286, ff_joystick_ac }, + { 0x046d, 0xc287, ff_joystick_ac }, { 0x046d, 0xc293, ff_joystick }, { 0x046d, 0xc294, ff_wheel }, { 0x046d, 0xc295, ff_joystick }, diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c new file mode 100644 index 0000000..4a3a94f --- /dev/null +++ b/drivers/hid/hid-magicmouse.c @@ -0,0 +1,449 @@ +/* + * Apple "Magic" Wireless Mouse driver + * + * Copyright (c) 2010 Michael Poole <mdpoole@troilus.org> + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include <linux/device.h> +#include <linux/hid.h> +#include <linux/module.h> +#include <linux/usb.h> + +#include "hid-ids.h" + +static bool emulate_3button = true; +module_param(emulate_3button, bool, 0644); +MODULE_PARM_DESC(emulate_3button, "Emulate a middle button"); + +static int middle_button_start = -350; +static int middle_button_stop = +350; + +static bool emulate_scroll_wheel = true; +module_param(emulate_scroll_wheel, bool, 0644); +MODULE_PARM_DESC(emulate_scroll_wheel, "Emulate a scroll wheel"); + +static bool report_touches = true; +module_param(report_touches, bool, 0644); +MODULE_PARM_DESC(report_touches, "Emit touch records (otherwise, only use them for emulation)"); + +static bool report_undeciphered; +module_param(report_undeciphered, bool, 0644); +MODULE_PARM_DESC(report_undeciphered, "Report undeciphered multi-touch state field using a MSC_RAW event"); + +#define TOUCH_REPORT_ID 0x29 +/* These definitions are not precise, but they're close enough. (Bits + * 0x03 seem to indicate the aspect ratio of the touch, bits 0x70 seem + * to be some kind of bit mask -- 0x20 may be a near-field reading, + * and 0x40 is actual contact, and 0x10 may be a start/stop or change + * indication.) + */ +#define TOUCH_STATE_MASK 0xf0 +#define TOUCH_STATE_NONE 0x00 +#define TOUCH_STATE_START 0x30 +#define TOUCH_STATE_DRAG 0x40 + +/** + * struct magicmouse_sc - Tracks Magic Mouse-specific data. + * @input: Input device through which we report events. + * @quirks: Currently unused. + * @last_timestamp: Timestamp from most recent (18-bit) touch report + * (units of milliseconds over short windows, but seems to + * increase faster when there are no touches). + * @delta_time: 18-bit difference between the two most recent touch + * reports from the mouse. + * @ntouches: Number of touches in most recent touch report. + * @scroll_accel: Number of consecutive scroll motions. + * @scroll_jiffies: Time of last scroll motion. + * @touches: Most recent data for a touch, indexed by tracking ID. + * @tracking_ids: Mapping of current touch input data to @touches. + */ +struct magicmouse_sc { + struct input_dev *input; + unsigned long quirks; + + int last_timestamp; + int delta_time; + int ntouches; + int scroll_accel; + unsigned long scroll_jiffies; + + struct { + short x; + short y; + short scroll_y; + u8 size; + } touches[16]; + int tracking_ids[16]; +}; + +static int magicmouse_firm_touch(struct magicmouse_sc *msc) +{ + int touch = -1; + int ii; + + /* If there is only one "firm" touch, set touch to its + * tracking ID. + */ + for (ii = 0; ii < msc->ntouches; ii++) { + int idx = msc->tracking_ids[ii]; + if (msc->touches[idx].size < 8) { + /* Ignore this touch. */ + } else if (touch >= 0) { + touch = -1; + break; + } else { + touch = idx; + } + } + + return touch; +} + +static void magicmouse_emit_buttons(struct magicmouse_sc *msc, int state) +{ + int last_state = test_bit(BTN_LEFT, msc->input->key) << 0 | + test_bit(BTN_RIGHT, msc->input->key) << 1 | + test_bit(BTN_MIDDLE, msc->input->key) << 2; + + if (emulate_3button) { + int id; + + /* If some button was pressed before, keep it held + * down. Otherwise, if there's exactly one firm + * touch, use that to override the mouse's guess. + */ + if (state == 0) { + /* The button was released. */ + } else if (last_state != 0) { + state = last_state; + } else if ((id = magicmouse_firm_touch(msc)) >= 0) { + int x = msc->touches[id].x; + if (x < middle_button_start) + state = 1; + else if (x > middle_button_stop) + state = 2; + else + state = 4; + } /* else: we keep the mouse's guess */ + + input_report_key(msc->input, BTN_MIDDLE, state & 4); + } + + input_report_key(msc->input, BTN_LEFT, state & 1); + input_report_key(msc->input, BTN_RIGHT, state & 2); + + if (state != last_state) + msc->scroll_accel = 0; +} + +static void magicmouse_emit_touch(struct magicmouse_sc *msc, int raw_id, u8 *tdata) +{ + struct input_dev *input = msc->input; + __s32 x_y = tdata[0] << 8 | tdata[1] << 16 | tdata[2] << 24; + int misc = tdata[5] | tdata[6] << 8; + int id = (misc >> 6) & 15; + int x = x_y << 12 >> 20; + int y = -(x_y >> 20); + + /* Store tracking ID and other fields. */ + msc->tracking_ids[raw_id] = id; + msc->touches[id].x = x; + msc->touches[id].y = y; + msc->touches[id].size = misc & 63; + + /* If requested, emulate a scroll wheel by detecting small + * vertical touch motions along the middle of the mouse. + */ + if (emulate_scroll_wheel && + middle_button_start < x && x < middle_button_stop) { + static const int accel_profile[] = { + 256, 228, 192, 160, 128, 96, 64, 32, + }; + unsigned long now = jiffies; + int step = msc->touches[id].scroll_y - y; + + /* Reset acceleration after half a second. */ + if (time_after(now, msc->scroll_jiffies + HZ / 2)) + msc->scroll_accel = 0; + + /* Calculate and apply the scroll motion. */ + switch (tdata[7] & TOUCH_STATE_MASK) { + case TOUCH_STATE_START: + msc->touches[id].scroll_y = y; + msc->scroll_accel = min_t(int, msc->scroll_accel + 1, + ARRAY_SIZE(accel_profile) - 1); + break; + case TOUCH_STATE_DRAG: + step = step / accel_profile[msc->scroll_accel]; + if (step != 0) { + msc->touches[id].scroll_y = y; + msc->scroll_jiffies = now; + input_report_rel(input, REL_WHEEL, step); + } + break; + } + } + + /* Generate the input events for this touch. */ + if (report_touches) { + int orientation = (misc >> 10) - 32; + + input_report_abs(input, ABS_MT_TRACKING_ID, id); + input_report_abs(input, ABS_MT_TOUCH_MAJOR, tdata[3]); + input_report_abs(input, ABS_MT_TOUCH_MINOR, tdata[4]); + input_report_abs(input, ABS_MT_ORIENTATION, orientation); + input_report_abs(input, ABS_MT_POSITION_X, x); + input_report_abs(input, ABS_MT_POSITION_Y, y); + + if (report_undeciphered) + input_event(input, EV_MSC, MSC_RAW, tdata[7]); + + input_mt_sync(input); + } +} + +static int magicmouse_raw_event(struct hid_device *hdev, + struct hid_report *report, u8 *data, int size) +{ + struct magicmouse_sc *msc = hid_get_drvdata(hdev); + struct input_dev *input = msc->input; + int x, y, ts, ii, clicks; + + switch (data[0]) { + case 0x10: + if (size != 6) + return 0; + x = (__s16)(data[2] | data[3] << 8); + y = (__s16)(data[4] | data[5] << 8); + clicks = data[1]; + break; + case TOUCH_REPORT_ID: + /* Expect six bytes of prefix, and N*8 bytes of touch data. */ + if (size < 6 || ((size - 6) % 8) != 0) + return 0; + ts = data[3] >> 6 | data[4] << 2 | data[5] << 10; + msc->delta_time = (ts - msc->last_timestamp) & 0x3ffff; + msc->last_timestamp = ts; + msc->ntouches = (size - 6) / 8; + for (ii = 0; ii < msc->ntouches; ii++) + magicmouse_emit_touch(msc, ii, data + ii * 8 + 6); + /* When emulating three-button mode, it is important + * to have the current touch information before + * generating a click event. + */ + x = (signed char)data[1]; + y = (signed char)data[2]; + clicks = data[3]; + break; + case 0x20: /* Theoretically battery status (0-100), but I have + * never seen it -- maybe it is only upon request. + */ + case 0x60: /* Unknown, maybe laser on/off. */ + case 0x61: /* Laser reflection status change. + * data[1]: 0 = spotted, 1 = lost + */ + default: + return 0; + } + + magicmouse_emit_buttons(msc, clicks & 3); + input_report_rel(input, REL_X, x); + input_report_rel(input, REL_Y, y); + input_sync(input); + return 1; +} + +static int magicmouse_input_open(struct input_dev *dev) +{ + struct hid_device *hid = input_get_drvdata(dev); + + return hid->ll_driver->open(hid); +} + +static void magicmouse_input_close(struct input_dev *dev) +{ + struct hid_device *hid = input_get_drvdata(dev); + + hid->ll_driver->close(hid); +} + +static void magicmouse_setup_input(struct input_dev *input, struct hid_device *hdev) +{ + input_set_drvdata(input, hdev); + input->event = hdev->ll_driver->hidinput_input_event; + input->open = magicmouse_input_open; + input->close = magicmouse_input_close; + + input->name = hdev->name; + input->phys = hdev->phys; + input->uniq = hdev->uniq; + input->id.bustype = hdev->bus; + input->id.vendor = hdev->vendor; + input->id.product = hdev->product; + input->id.version = hdev->version; + input->dev.parent = hdev->dev.parent; + + __set_bit(EV_KEY, input->evbit); + __set_bit(BTN_LEFT, input->keybit); + __set_bit(BTN_RIGHT, input->keybit); + if (emulate_3button) + __set_bit(BTN_MIDDLE, input->keybit); + __set_bit(BTN_TOOL_FINGER, input->keybit); + + __set_bit(EV_REL, input->evbit); + __set_bit(REL_X, input->relbit); + __set_bit(REL_Y, input->relbit); + if (emulate_scroll_wheel) + __set_bit(REL_WHEEL, input->relbit); + + if (report_touches) { + __set_bit(EV_ABS, input->evbit); + + input_set_abs_params(input, ABS_MT_TRACKING_ID, 0, 15, 0, 0); + input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 255, 4, 0); + input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 255, 4, 0); + input_set_abs_params(input, ABS_MT_ORIENTATION, -32, 31, 1, 0); + input_set_abs_params(input, ABS_MT_POSITION_X, -1100, 1358, + 4, 0); + /* Note: Touch Y position from the device is inverted relative + * to how pointer motion is reported (and relative to how USB + * HID recommends the coordinates work). This driver keeps + * the origin at the same position, and just uses the additive + * inverse of the reported Y. + */ + input_set_abs_params(input, ABS_MT_POSITION_Y, -1589, 2047, + 4, 0); + } + + if (report_undeciphered) { + __set_bit(EV_MSC, input->evbit); + __set_bit(MSC_RAW, input->mscbit); + } +} + +static int magicmouse_probe(struct hid_device *hdev, + const struct hid_device_id *id) +{ + __u8 feature_1[] = { 0xd7, 0x01 }; + __u8 feature_2[] = { 0xf8, 0x01, 0x32 }; + struct input_dev *input; + struct magicmouse_sc *msc; + struct hid_report *report; + int ret; + + msc = kzalloc(sizeof(*msc), GFP_KERNEL); + if (msc == NULL) { + dev_err(&hdev->dev, "can't alloc magicmouse descriptor\n"); + return -ENOMEM; + } + + msc->quirks = id->driver_data; + hid_set_drvdata(hdev, msc); + + ret = hid_parse(hdev); + if (ret) { + dev_err(&hdev->dev, "magicmouse hid parse failed\n"); + goto err_free; + } + + ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT); + if (ret) { + dev_err(&hdev->dev, "magicmouse hw start failed\n"); + goto err_free; + } + + report = hid_register_report(hdev, HID_INPUT_REPORT, TOUCH_REPORT_ID); + if (!report) { + dev_err(&hdev->dev, "unable to register touch report\n"); + ret = -ENOMEM; + goto err_stop_hw; + } + report->size = 6; + + ret = hdev->hid_output_raw_report(hdev, feature_1, sizeof(feature_1), + HID_FEATURE_REPORT); + if (ret != sizeof(feature_1)) { + dev_err(&hdev->dev, "unable to request touch data (1:%d)\n", + ret); + goto err_stop_hw; + } + ret = hdev->hid_output_raw_report(hdev, feature_2, + sizeof(feature_2), HID_FEATURE_REPORT); + if (ret != sizeof(feature_2)) { + dev_err(&hdev->dev, "unable to request touch data (2:%d)\n", + ret); + goto err_stop_hw; + } + + input = input_allocate_device(); + if (!input) { + dev_err(&hdev->dev, "can't alloc input device\n"); + ret = -ENOMEM; + goto err_stop_hw; + } + magicmouse_setup_input(input, hdev); + + ret = input_register_device(input); + if (ret) { + dev_err(&hdev->dev, "input device registration failed\n"); + goto err_input; + } + msc->input = input; + + return 0; +err_input: + input_free_device(input); +err_stop_hw: + hid_hw_stop(hdev); +err_free: + kfree(msc); + return ret; +} + +static void magicmouse_remove(struct hid_device *hdev) +{ + hid_hw_stop(hdev); + kfree(hid_get_drvdata(hdev)); +} + +static const struct hid_device_id magic_mice[] = { + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MAGICMOUSE), + .driver_data = 0 }, + { } +}; +MODULE_DEVICE_TABLE(hid, magic_mice); + +static struct hid_driver magicmouse_driver = { + .name = "magicmouse", + .id_table = magic_mice, + .probe = magicmouse_probe, + .remove = magicmouse_remove, + .raw_event = magicmouse_raw_event, +}; + +static int __init magicmouse_init(void) +{ + int ret; + + ret = hid_register_driver(&magicmouse_driver); + if (ret) + printk(KERN_ERR "can't register magicmouse driver\n"); + + return ret; +} + +static void __exit magicmouse_exit(void) +{ + hid_unregister_driver(&magicmouse_driver); +} + +module_init(magicmouse_init); +module_exit(magicmouse_exit); +MODULE_LICENSE("GPL"); diff --git a/drivers/hid/hid-mosart.c b/drivers/hid/hid-mosart.c new file mode 100644 index 0000000..c871816 --- /dev/null +++ b/drivers/hid/hid-mosart.c @@ -0,0 +1,273 @@ +/* + * HID driver for the multitouch panel on the ASUS EeePC T91MT + * + * Copyright (c) 2009-2010 Stephane Chatty <chatty@enac.fr> + * Copyright (c) 2010 Teemu Tuominen <teemu.tuominen@cybercom.com> + * + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include <linux/device.h> +#include <linux/hid.h> +#include <linux/module.h> +#include <linux/usb.h> +#include "usbhid/usbhid.h" + +MODULE_AUTHOR("Stephane Chatty <chatty@enac.fr>"); +MODULE_DESCRIPTION("MosArt dual-touch panel"); +MODULE_LICENSE("GPL"); + +#include "hid-ids.h" + +struct mosart_data { + __u16 x, y; + __u8 id; + bool valid; /* valid finger data, or just placeholder? */ + bool first; /* is this the first finger in this frame? */ + bool activity_now; /* at least one active finger in this frame? */ + bool activity; /* at least one active finger previously? */ +}; + +static int mosart_input_mapping(struct hid_device *hdev, struct hid_input *hi, + struct hid_field *field, struct hid_usage *usage, + unsigned long **bit, int *max) +{ + switch (usage->hid & HID_USAGE_PAGE) { + + case HID_UP_GENDESK: + switch (usage->hid) { + case HID_GD_X: + hid_map_usage(hi, usage, bit, max, + EV_ABS, ABS_MT_POSITION_X); + /* touchscreen emulation */ + input_set_abs_params(hi->input, ABS_X, + field->logical_minimum, + field->logical_maximum, 0, 0); + return 1; + case HID_GD_Y: + hid_map_usage(hi, usage, bit, max, + EV_ABS, ABS_MT_POSITION_Y); + /* touchscreen emulation */ + input_set_abs_params(hi->input, ABS_Y, + field->logical_minimum, + field->logical_maximum, 0, 0); + return 1; + } + return 0; + + case HID_UP_DIGITIZER: + switch (usage->hid) { + case HID_DG_CONFIDENCE: + case HID_DG_TIPSWITCH: + case HID_DG_INPUTMODE: + case HID_DG_DEVICEINDEX: + case HID_DG_CONTACTCOUNT: + case HID_DG_CONTACTMAX: + case HID_DG_TIPPRESSURE: + case HID_DG_WIDTH: + case HID_DG_HEIGHT: + return -1; + case HID_DG_INRANGE: + /* touchscreen emulation */ + hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH); + return 1; + + case HID_DG_CONTACTID: + hid_map_usage(hi, usage, bit, max, + EV_ABS, ABS_MT_TRACKING_ID); + return 1; + + } + return 0; + + case 0xff000000: + /* ignore HID features */ + return -1; + } + + return 0; +} + +static int mosart_input_mapped(struct hid_device *hdev, struct hid_input *hi, + struct hid_field *field, struct hid_usage *usage, + unsigned long **bit, int *max) +{ + if (usage->type == EV_KEY || usage->type == EV_ABS) + clear_bit(usage->code, *bit); + + return 0; +} + +/* + * this function is called when a whole finger has been parsed, + * so that it can decide what to send to the input layer. + */ +static void mosart_filter_event(struct mosart_data *td, struct input_dev *input) +{ + td->first = !td->first; /* touchscreen emulation */ + + if (!td->valid) { + /* + * touchscreen emulation: if no finger in this frame is valid + * and there previously was finger activity, this is a release + */ + if (!td->first && !td->activity_now && td->activity) { + input_event(input, EV_KEY, BTN_TOUCH, 0); + td->activity = false; + } + return; + } + + input_event(input, EV_ABS, ABS_MT_TRACKING_ID, td->id); + input_event(input, EV_ABS, ABS_MT_POSITION_X, td->x); + input_event(input, EV_ABS, ABS_MT_POSITION_Y, td->y); + + input_mt_sync(input); + td->valid = false; + + /* touchscreen emulation: if first active finger in this frame... */ + if (!td->activity_now) { + /* if there was no previous activity, emit touch event */ + if (!td->activity) { + input_event(input, EV_KEY, BTN_TOUCH, 1); + td->activity = true; + } + td->activity_now = true; + /* and in any case this is our preferred finger */ + input_event(input, EV_ABS, ABS_X, td->x); + input_event(input, EV_ABS, ABS_Y, td->y); + } +} + + +static int mosart_event(struct hid_device *hid, struct hid_field *field, + struct hid_usage *usage, __s32 value) +{ + struct mosart_data *td = hid_get_drvdata(hid); + + if (hid->claimed & HID_CLAIMED_INPUT) { + struct input_dev *input = field->hidinput->input; + switch (usage->hid) { + case HID_DG_INRANGE: + td->valid = !!value; + break; + case HID_GD_X: + td->x = value; + break; + case HID_GD_Y: + td->y = value; + mosart_filter_event(td, input); + break; + case HID_DG_CONTACTID: + td->id = value; + break; + case HID_DG_CONTACTCOUNT: + /* touch emulation: this is the last field in a frame */ + td->first = false; + td->activity_now = false; + break; + case HID_DG_CONFIDENCE: + case HID_DG_TIPSWITCH: + /* avoid interference from generic hidinput handling */ + break; + + default: + /* fallback to the generic hidinput handling */ + return 0; + } + } + + /* we have handled the hidinput part, now remains hiddev */ + if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event) + hid->hiddev_hid_event(hid, field, usage, value); + + return 1; +} + +static int mosart_probe(struct hid_device *hdev, const struct hid_device_id *id) +{ + int ret; + struct mosart_data *td; + + + td = kmalloc(sizeof(struct mosart_data), GFP_KERNEL); + if (!td) { + dev_err(&hdev->dev, "cannot allocate MosArt data\n"); + return -ENOMEM; + } + td->valid = false; + td->activity = false; + td->activity_now = false; + td->first = false; + hid_set_drvdata(hdev, td); + + /* currently, it's better to have one evdev device only */ +#if 0 + hdev->quirks |= HID_QUIRK_MULTI_INPUT; +#endif + + ret = hid_parse(hdev); + if (ret == 0) + ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT); + + if (ret == 0) { + struct hid_report_enum *re = hdev->report_enum + + HID_FEATURE_REPORT; + struct hid_report *r = re->report_id_hash[7]; + + r->field[0]->value[0] = 0x02; + usbhid_submit_report(hdev, r, USB_DIR_OUT); + } else + kfree(td); + + return ret; +} + +static void mosart_remove(struct hid_device *hdev) +{ + hid_hw_stop(hdev); + kfree(hid_get_drvdata(hdev)); + hid_set_drvdata(hdev, NULL); +} + +static const struct hid_device_id mosart_devices[] = { + { HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_T91MT) }, + { } +}; +MODULE_DEVICE_TABLE(hid, mosart_devices); + +static const struct hid_usage_id mosart_grabbed_usages[] = { + { HID_ANY_ID, HID_ANY_ID, HID_ANY_ID }, + { HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1} +}; + +static struct hid_driver mosart_driver = { + .name = "mosart", + .id_table = mosart_devices, + .probe = mosart_probe, + .remove = mosart_remove, + .input_mapping = mosart_input_mapping, + .input_mapped = mosart_input_mapped, + .usage_table = mosart_grabbed_usages, + .event = mosart_event, +}; + +static int __init mosart_init(void) +{ + return hid_register_driver(&mosart_driver); +} + +static void __exit mosart_exit(void) +{ + hid_unregister_driver(&mosart_driver); +} + +module_init(mosart_init); +module_exit(mosart_exit); + diff --git a/drivers/hid/hid-ntrig.c b/drivers/hid/hid-ntrig.c index 49ce69d..3234c72 100644 --- a/drivers/hid/hid-ntrig.c +++ b/drivers/hid/hid-ntrig.c @@ -25,11 +25,16 @@ EV_KEY, (c)) struct ntrig_data { - __s32 x, y, id, w, h; - char reading_a_point, found_contact_id; - char pen_active; - char finger_active; - char inverted; + /* Incoming raw values for a single contact */ + __u16 x, y, w, h; + __u16 id; + __u8 confidence; + + bool reading_mt; + __u8 first_contact_confidence; + + __u8 mt_footer[4]; + __u8 mt_foot_count; }; /* @@ -42,8 +47,11 @@ static int ntrig_input_mapping(struct hid_device *hdev, struct hid_input *hi, struct hid_field *field, struct hid_usage *usage, unsigned long **bit, int *max) { - switch (usage->hid & HID_USAGE_PAGE) { + /* No special mappings needed for the pen and single touch */ + if (field->physical) + return 0; + switch (usage->hid & HID_USAGE_PAGE) { case HID_UP_GENDESK: switch (usage->hid) { case HID_GD_X: @@ -66,18 +74,12 @@ static int ntrig_input_mapping(struct hid_device *hdev, struct hid_input *hi, case HID_UP_DIGITIZER: switch (usage->hid) { /* we do not want to map these for now */ - case HID_DG_CONTACTID: /* value is useless */ + case HID_DG_CONTACTID: /* Not trustworthy, squelch for now */ case HID_DG_INPUTMODE: case HID_DG_DEVICEINDEX: - case HID_DG_CONTACTCOUNT: case HID_DG_CONTACTMAX: return -1; - /* original mapping by Rafi Rubin */ - case HID_DG_CONFIDENCE: - nt_map_key_clear(BTN_TOOL_DOUBLETAP); - return 1; - /* width/height mapped on TouchMajor/TouchMinor/Orientation */ case HID_DG_WIDTH: hid_map_usage(hi, usage, bit, max, @@ -104,6 +106,10 @@ static int ntrig_input_mapped(struct hid_device *hdev, struct hid_input *hi, struct hid_field *field, struct hid_usage *usage, unsigned long **bit, int *max) { + /* No special mappings needed for the pen and single touch */ + if (field->physical) + return 0; + if (usage->type == EV_KEY || usage->type == EV_REL || usage->type == EV_ABS) clear_bit(usage->code, *bit); @@ -123,31 +129,30 @@ static int ntrig_event (struct hid_device *hid, struct hid_field *field, struct input_dev *input = field->hidinput->input; struct ntrig_data *nd = hid_get_drvdata(hid); + /* No special handling needed for the pen */ + if (field->application == HID_DG_PEN) + return 0; + if (hid->claimed & HID_CLAIMED_INPUT) { switch (usage->hid) { - - case HID_DG_INRANGE: - if (field->application & 0x3) - nd->pen_active = (value != 0); - else - nd->finger_active = (value != 0); - return 0; - - case HID_DG_INVERT: - nd->inverted = value; - return 0; - + case 0xff000001: + /* Tag indicating the start of a multitouch group */ + nd->reading_mt = 1; + nd->first_contact_confidence = 0; + break; + case HID_DG_CONFIDENCE: + nd->confidence = value; + break; case HID_GD_X: nd->x = value; - nd->reading_a_point = 1; + /* Clear the contact footer */ + nd->mt_foot_count = 0; break; case HID_GD_Y: nd->y = value; break; case HID_DG_CONTACTID: nd->id = value; - /* we receive this only when in multitouch mode */ - nd->found_contact_id = 1; break; case HID_DG_WIDTH: nd->w = value; @@ -159,35 +164,13 @@ static int ntrig_event (struct hid_device *hid, struct hid_field *field, * report received in a finger event. We want * to emit a normal (X, Y) position */ - if (!nd->found_contact_id) { - if (nd->pen_active && nd->finger_active) { - input_report_key(input, BTN_TOOL_DOUBLETAP, 0); - input_report_key(input, BTN_TOOL_DOUBLETAP, 1); - } + if (!nd->reading_mt) { + input_report_key(input, BTN_TOOL_DOUBLETAP, + (nd->confidence != 0)); input_event(input, EV_ABS, ABS_X, nd->x); input_event(input, EV_ABS, ABS_Y, nd->y); } break; - case HID_DG_TIPPRESSURE: - /* - * when in single touch mode, this is the last - * report received in a pen event. We want - * to emit a normal (X, Y) position - */ - if (! nd->found_contact_id) { - if (nd->pen_active && nd->finger_active) { - input_report_key(input, - nd->inverted ? BTN_TOOL_RUBBER : BTN_TOOL_PEN - , 0); - input_report_key(input, - nd->inverted ? BTN_TOOL_RUBBER : BTN_TOOL_PEN - , 1); - } - input_event(input, EV_ABS, ABS_X, nd->x); - input_event(input, EV_ABS, ABS_Y, nd->y); - input_event(input, EV_ABS, ABS_PRESSURE, value); - } - break; case 0xff000002: /* * we receive this when the device is in multitouch @@ -195,10 +178,34 @@ static int ntrig_event (struct hid_device *hid, struct hid_field *field, * this usage tells if the contact point is real * or a placeholder */ - if (!nd->reading_a_point || value != 1) + + /* Shouldn't get more than 4 footer packets, so skip */ + if (nd->mt_foot_count >= 4) break; + + nd->mt_footer[nd->mt_foot_count++] = value; + + /* if the footer isn't complete break */ + if (nd->mt_foot_count != 4) + break; + + /* Pen activity signal, trigger end of touch. */ + if (nd->mt_footer[2]) { + nd->confidence = 0; + break; + } + + /* If the contact was invalid */ + if (!(nd->confidence && nd->mt_footer[0]) + || nd->w <= 250 + || nd->h <= 190) { + nd->confidence = 0; + break; + } + /* emit a normal (X, Y) for the first point only */ if (nd->id == 0) { + nd->first_contact_confidence = nd->confidence; input_event(input, EV_ABS, ABS_X, nd->x); input_event(input, EV_ABS, ABS_Y, nd->y); } @@ -220,8 +227,39 @@ static int ntrig_event (struct hid_device *hid, struct hid_field *field, ABS_MT_TOUCH_MINOR, nd->w); } input_mt_sync(field->hidinput->input); - nd->reading_a_point = 0; - nd->found_contact_id = 0; + break; + + case HID_DG_CONTACTCOUNT: /* End of a multitouch group */ + if (!nd->reading_mt) + break; + + nd->reading_mt = 0; + + if (nd->first_contact_confidence) { + switch (value) { + case 0: /* for single touch devices */ + case 1: + input_report_key(input, + BTN_TOOL_DOUBLETAP, 1); + break; + case 2: + input_report_key(input, + BTN_TOOL_TRIPLETAP, 1); + break; + case 3: + default: + input_report_key(input, + BTN_TOOL_QUADTAP, 1); + } + input_report_key(input, BTN_TOUCH, 1); + } else { + input_report_key(input, + BTN_TOOL_DOUBLETAP, 0); + input_report_key(input, + BTN_TOOL_TRIPLETAP, 0); + input_report_key(input, + BTN_TOOL_QUADTAP, 0); + } break; default: @@ -231,8 +269,8 @@ static int ntrig_event (struct hid_device *hid, struct hid_field *field, } /* we have handled the hidinput part, now remains hiddev */ - if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event) - hid->hiddev_hid_event(hid, field, usage, value); + if ((hid->claimed & HID_CLAIMED_HIDDEV) && hid->hiddev_hid_event) + hid->hiddev_hid_event(hid, field, usage, value); return 1; } @@ -241,23 +279,67 @@ static int ntrig_probe(struct hid_device *hdev, const struct hid_device_id *id) { int ret; struct ntrig_data *nd; + struct hid_input *hidinput; + struct input_dev *input; + + if (id->driver_data) + hdev->quirks |= HID_QUIRK_MULTI_INPUT; nd = kmalloc(sizeof(struct ntrig_data), GFP_KERNEL); if (!nd) { dev_err(&hdev->dev, "cannot allocate N-Trig data\n"); return -ENOMEM; } - nd->reading_a_point = 0; - nd->found_contact_id = 0; + + nd->reading_mt = 0; hid_set_drvdata(hdev, nd); ret = hid_parse(hdev); - if (!ret) - ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT); + if (ret) { + dev_err(&hdev->dev, "parse failed\n"); + goto err_free; + } + + ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT & ~HID_CONNECT_FF); + if (ret) { + dev_err(&hdev->dev, "hw start failed\n"); + goto err_free; + } - if (ret) - kfree (nd); + list_for_each_entry(hidinput, &hdev->inputs, list) { + input = hidinput->input; + switch (hidinput->report->field[0]->application) { + case HID_DG_PEN: + input->name = "N-Trig Pen"; + break; + case HID_DG_TOUCHSCREEN: + __clear_bit(BTN_TOOL_PEN, input->keybit); + /* + * A little something special to enable + * two and three finger taps. + */ + __set_bit(BTN_TOOL_DOUBLETAP, input->keybit); + __set_bit(BTN_TOOL_TRIPLETAP, input->keybit); + __set_bit(BTN_TOOL_QUADTAP, input->keybit); + /* + * The physical touchscreen (single touch) + * input has a value for physical, whereas + * the multitouch only has logical input + * fields. + */ + input->name = + (hidinput->report->field[0] + ->physical) ? + "N-Trig Touchscreen" : + "N-Trig MultiTouch"; + break; + } + } + + return 0; +err_free: + kfree(nd); return ret; } @@ -276,7 +358,7 @@ MODULE_DEVICE_TABLE(hid, ntrig_devices); static const struct hid_usage_id ntrig_grabbed_usages[] = { { HID_ANY_ID, HID_ANY_ID, HID_ANY_ID }, - { HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1} + { HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1 } }; static struct hid_driver ntrig_driver = { diff --git a/drivers/hid/hid-ortek.c b/drivers/hid/hid-ortek.c new file mode 100644 index 0000000..aa9a960 --- /dev/null +++ b/drivers/hid/hid-ortek.c @@ -0,0 +1,56 @@ +/* + * HID driver for Ortek WKB-2000 (wireless keyboard + mouse trackpad). + * Fixes LogicalMaximum error in USB report description, see + * http://bugzilla.kernel.org/show_bug.cgi?id=14787 + * + * Copyright (c) 2010 Johnathon Harris <jmharris@gmail.com> + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include <linux/device.h> +#include <linux/hid.h> +#include <linux/module.h> + +#include "hid-ids.h" + +static void ortek_report_fixup(struct hid_device *hdev, __u8 *rdesc, + unsigned int rsize) +{ + if (rsize >= 56 && rdesc[54] == 0x25 && rdesc[55] == 0x01) { + dev_info(&hdev->dev, "Fixing up Ortek WKB-2000 " + "report descriptor.\n"); + rdesc[55] = 0x92; + } +} + +static const struct hid_device_id ortek_devices[] = { + { HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_WKB2000) }, + { } +}; +MODULE_DEVICE_TABLE(hid, ortek_devices); + +static struct hid_driver ortek_driver = { + .name = "ortek", + .id_table = ortek_devices, + .report_fixup = ortek_report_fixup +}; + +static int __init ortek_init(void) +{ + return hid_register_driver(&ortek_driver); +} + +static void __exit ortek_exit(void) +{ + hid_unregister_driver(&ortek_driver); +} + +module_init(ortek_init); +module_exit(ortek_exit); +MODULE_LICENSE("GPL"); diff --git a/drivers/hid/hid-quanta.c b/drivers/hid/hid-quanta.c new file mode 100644 index 0000000..01dd51c --- /dev/null +++ b/drivers/hid/hid-quanta.c @@ -0,0 +1,260 @@ +/* + * HID driver for Quanta Optical Touch dual-touch panels + * + * Copyright (c) 2009-2010 Stephane Chatty <chatty@enac.fr> + * + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include <linux/device.h> +#include <linux/hid.h> +#include <linux/module.h> + +MODULE_AUTHOR("Stephane Chatty <chatty@enac.fr>"); +MODULE_DESCRIPTION("Quanta dual-touch panel"); +MODULE_LICENSE("GPL"); + +#include "hid-ids.h" + +struct quanta_data { + __u16 x, y; + __u8 id; + bool valid; /* valid finger data, or just placeholder? */ + bool first; /* is this the first finger in this frame? */ + bool activity_now; /* at least one active finger in this frame? */ + bool activity; /* at least one active finger previously? */ +}; + +static int quanta_input_mapping(struct hid_device *hdev, struct hid_input *hi, + struct hid_field *field, struct hid_usage *usage, + unsigned long **bit, int *max) +{ + switch (usage->hid & HID_USAGE_PAGE) { + + case HID_UP_GENDESK: + switch (usage->hid) { + case HID_GD_X: + hid_map_usage(hi, usage, bit, max, + EV_ABS, ABS_MT_POSITION_X); + /* touchscreen emulation */ + input_set_abs_params(hi->input, ABS_X, + field->logical_minimum, + field->logical_maximum, 0, 0); + return 1; + case HID_GD_Y: + hid_map_usage(hi, usage, bit, max, + EV_ABS, ABS_MT_POSITION_Y); + /* touchscreen emulation */ + input_set_abs_params(hi->input, ABS_Y, + field->logical_minimum, + field->logical_maximum, 0, 0); + return 1; + } + return 0; + + case HID_UP_DIGITIZER: + switch (usage->hid) { + case HID_DG_CONFIDENCE: + case HID_DG_TIPSWITCH: + case HID_DG_INPUTMODE: + case HID_DG_DEVICEINDEX: + case HID_DG_CONTACTCOUNT: + case HID_DG_CONTACTMAX: + case HID_DG_TIPPRESSURE: + case HID_DG_WIDTH: + case HID_DG_HEIGHT: + return -1; + case HID_DG_INRANGE: + /* touchscreen emulation */ + hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH); + return 1; + case HID_DG_CONTACTID: + hid_map_usage(hi, usage, bit, max, + EV_ABS, ABS_MT_TRACKING_ID); + return 1; + } + return 0; + + case 0xff000000: + /* ignore vendor-specific features */ + return -1; + } + + return 0; +} + +static int quanta_input_mapped(struct hid_device *hdev, struct hid_input *hi, + struct hid_field *field, struct hid_usage *usage, + unsigned long **bit, int *max) +{ + if (usage->type == EV_KEY || usage->type == EV_ABS) + clear_bit(usage->code, *bit); + + return 0; +} + +/* + * this function is called when a whole finger has been parsed, + * so that it can decide what to send to the input layer. + */ +static void quanta_filter_event(struct quanta_data *td, struct input_dev *input) +{ + + td->first = !td->first; /* touchscreen emulation */ + + if (!td->valid) { + /* + * touchscreen emulation: if no finger in this frame is valid + * and there previously was finger activity, this is a release + */ + if (!td->first && !td->activity_now && td->activity) { + input_event(input, EV_KEY, BTN_TOUCH, 0); + td->activity = false; + } + return; + } + + input_event(input, EV_ABS, ABS_MT_TRACKING_ID, td->id); + input_event(input, EV_ABS, ABS_MT_POSITION_X, td->x); + input_event(input, EV_ABS, ABS_MT_POSITION_Y, td->y); + + input_mt_sync(input); + td->valid = false; + + /* touchscreen emulation: if first active finger in this frame... */ + if (!td->activity_now) { + /* if there was no previous activity, emit touch event */ + if (!td->activity) { + input_event(input, EV_KEY, BTN_TOUCH, 1); + td->activity = true; + } + td->activity_now = true; + /* and in any case this is our preferred finger */ + input_event(input, EV_ABS, ABS_X, td->x); + input_event(input, EV_ABS, ABS_Y, td->y); + } +} + + +static int quanta_event(struct hid_device *hid, struct hid_field *field, + struct hid_usage *usage, __s32 value) +{ + struct quanta_data *td = hid_get_drvdata(hid); + + if (hid->claimed & HID_CLAIMED_INPUT) { + struct input_dev *input = field->hidinput->input; + + switch (usage->hid) { + case HID_DG_INRANGE: + td->valid = !!value; + break; + case HID_GD_X: + td->x = value; + break; + case HID_GD_Y: + td->y = value; + quanta_filter_event(td, input); + break; + case HID_DG_CONTACTID: + td->id = value; + break; + case HID_DG_CONTACTCOUNT: + /* touch emulation: this is the last field in a frame */ + td->first = false; + td->activity_now = false; + break; + case HID_DG_CONFIDENCE: + case HID_DG_TIPSWITCH: + /* avoid interference from generic hidinput handling */ + break; + + default: + /* fallback to the generic hidinput handling */ + return 0; + } + } + + /* we have handled the hidinput part, now remains hiddev */ + if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event) + hid->hiddev_hid_event(hid, field, usage, value); + + return 1; +} + +static int quanta_probe(struct hid_device *hdev, const struct hid_device_id *id) +{ + int ret; + struct quanta_data *td; + + td = kmalloc(sizeof(struct quanta_data), GFP_KERNEL); + if (!td) { + dev_err(&hdev->dev, "cannot allocate Quanta Touch data\n"); + return -ENOMEM; + } + td->valid = false; + td->activity = false; + td->activity_now = false; + td->first = false; + hid_set_drvdata(hdev, td); + + ret = hid_parse(hdev); + if (!ret) + ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT); + + if (ret) + kfree(td); + + return ret; +} + +static void quanta_remove(struct hid_device *hdev) +{ + hid_hw_stop(hdev); + kfree(hid_get_drvdata(hdev)); + hid_set_drvdata(hdev, NULL); +} + +static const struct hid_device_id quanta_devices[] = { + { HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, + USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH) }, + { HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, + USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN) }, + { } +}; +MODULE_DEVICE_TABLE(hid, quanta_devices); + +static const struct hid_usage_id quanta_grabbed_usages[] = { + { HID_ANY_ID, HID_ANY_ID, HID_ANY_ID }, + { HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1} +}; + +static struct hid_driver quanta_driver = { + .name = "quanta-touch", + .id_table = quanta_devices, + .probe = quanta_probe, + .remove = quanta_remove, + .input_mapping = quanta_input_mapping, + .input_mapped = quanta_input_mapped, + .usage_table = quanta_grabbed_usages, + .event = quanta_event, +}; + +static int __init quanta_init(void) +{ + return hid_register_driver(&quanta_driver); +} + +static void __exit quanta_exit(void) +{ + hid_unregister_driver(&quanta_driver); +} + +module_init(quanta_init); +module_exit(quanta_exit); + diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c index 4e84502..9bf00d7 100644 --- a/drivers/hid/hid-sony.c +++ b/drivers/hid/hid-sony.c @@ -48,7 +48,7 @@ static void sony_report_fixup(struct hid_device *hdev, __u8 *rdesc, * to "operational". Without this, the ps3 controller will not report any * events. */ -static int sony_set_operational(struct hid_device *hdev) +static int sony_set_operational_usb(struct hid_device *hdev) { struct usb_interface *intf = to_usb_interface(hdev->dev.parent); struct usb_device *dev = interface_to_usbdev(intf); @@ -73,6 +73,12 @@ static int sony_set_operational(struct hid_device *hdev) return ret; } +static int sony_set_operational_bt(struct hid_device *hdev) +{ + unsigned char buf[] = { 0x53, 0xf4, 0x42, 0x03, 0x00, 0x00 }; + return hdev->hid_output_raw_report(hdev, buf, sizeof(buf), HID_FEATURE_REPORT); +} + static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id) { int ret; @@ -81,7 +87,7 @@ static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id) sc = kzalloc(sizeof(*sc), GFP_KERNEL); if (sc == NULL) { - dev_err(&hdev->dev, "can't alloc apple descriptor\n"); + dev_err(&hdev->dev, "can't alloc sony descriptor\n"); return -ENOMEM; } @@ -101,7 +107,17 @@ static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id) goto err_free; } - ret = sony_set_operational(hdev); + switch (hdev->bus) { + case BUS_USB: + ret = sony_set_operational_usb(hdev); + break; + case BUS_BLUETOOTH: + ret = sony_set_operational_bt(hdev); + break; + default: + ret = 0; + } + if (ret < 0) goto err_stop; @@ -121,6 +137,7 @@ static void sony_remove(struct hid_device *hdev) static const struct hid_device_id sony_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) }, { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE), .driver_data = VAIO_RDESC_CONSTANT }, { } diff --git a/drivers/hid/hid-stantum.c b/drivers/hid/hid-stantum.c new file mode 100644 index 0000000..2e592a0 --- /dev/null +++ b/drivers/hid/hid-stantum.c @@ -0,0 +1,283 @@ +/* + * HID driver for Stantum multitouch panels + * + * Copyright (c) 2009 Stephane Chatty <chatty@enac.fr> + * + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include <linux/device.h> +#include <linux/hid.h> +#include <linux/module.h> + +MODULE_AUTHOR("Stephane Chatty <chatty@enac.fr>"); +MODULE_DESCRIPTION("Stantum HID multitouch panels"); +MODULE_LICENSE("GPL"); + +#include "hid-ids.h" + +struct stantum_data { + __s32 x, y, z, w, h; /* x, y, pressure, width, height */ + __u16 id; /* touch id */ + bool valid; /* valid finger data, or just placeholder? */ + bool first; /* first finger in the HID packet? */ + bool activity; /* at least one active finger so far? */ +}; + +static int stantum_input_mapping(struct hid_device *hdev, struct hid_input *hi, + struct hid_field *field, struct hid_usage *usage, + unsigned long **bit, int *max) +{ + switch (usage->hid & HID_USAGE_PAGE) { + + case HID_UP_GENDESK: + switch (usage->hid) { + case HID_GD_X: + hid_map_usage(hi, usage, bit, max, + EV_ABS, ABS_MT_POSITION_X); + /* touchscreen emulation */ + input_set_abs_params(hi->input, ABS_X, + field->logical_minimum, + field->logical_maximum, 0, 0); + return 1; + case HID_GD_Y: + hid_map_usage(hi, usage, bit, max, + EV_ABS, ABS_MT_POSITION_Y); + /* touchscreen emulation */ + input_set_abs_params(hi->input, ABS_Y, + field->logical_minimum, + field->logical_maximum, 0, 0); + return 1; + } + return 0; + + case HID_UP_DIGITIZER: + switch (usage->hid) { + case HID_DG_INRANGE: + case HID_DG_CONFIDENCE: + case HID_DG_INPUTMODE: + case HID_DG_DEVICEINDEX: + case HID_DG_CONTACTCOUNT: + case HID_DG_CONTACTMAX: + return -1; + + case HID_DG_TIPSWITCH: + /* touchscreen emulation */ + hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH); + return 1; + + case HID_DG_WIDTH: + hid_map_usage(hi, usage, bit, max, + EV_ABS, ABS_MT_TOUCH_MAJOR); + return 1; + case HID_DG_HEIGHT: + hid_map_usage(hi, usage, bit, max, + EV_ABS, ABS_MT_TOUCH_MINOR); + input_set_abs_params(hi->input, ABS_MT_ORIENTATION, + 1, 1, 0, 0); + return 1; + case HID_DG_TIPPRESSURE: + hid_map_usage(hi, usage, bit, max, + EV_ABS, ABS_MT_PRESSURE); + return 1; + + case HID_DG_CONTACTID: + hid_map_usage(hi, usage, bit, max, + EV_ABS, ABS_MT_TRACKING_ID); + return 1; + + } + return 0; + + case 0xff000000: + /* no input-oriented meaning */ + return -1; + } + + return 0; +} + +static int stantum_input_mapped(struct hid_device *hdev, struct hid_input *hi, + struct hid_field *field, struct hid_usage *usage, + unsigned long **bit, int *max) +{ + if (usage->type == EV_KEY || usage->type == EV_ABS) + clear_bit(usage->code, *bit); + + return 0; +} + +/* + * this function is called when a whole finger has been parsed, + * so that it can decide what to send to the input layer. + */ +static void stantum_filter_event(struct stantum_data *sd, + struct input_dev *input) +{ + bool wide; + + if (!sd->valid) { + /* + * touchscreen emulation: if the first finger is not valid and + * there previously was finger activity, this is a release + */ + if (sd->first && sd->activity) { + input_event(input, EV_KEY, BTN_TOUCH, 0); + sd->activity = false; + } + return; + } + + input_event(input, EV_ABS, ABS_MT_TRACKING_ID, sd->id); + input_event(input, EV_ABS, ABS_MT_POSITION_X, sd->x); + input_event(input, EV_ABS, ABS_MT_POSITION_Y, sd->y); + + wide = (sd->w > sd->h); + input_event(input, EV_ABS, ABS_MT_ORIENTATION, wide); + input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, wide ? sd->w : sd->h); + input_event(input, EV_ABS, ABS_MT_TOUCH_MINOR, wide ? sd->h : sd->w); + + input_event(input, EV_ABS, ABS_MT_PRESSURE, sd->z); + + input_mt_sync(input); + sd->valid = false; + + /* touchscreen emulation */ + if (sd->first) { + if (!sd->activity) { + input_event(input, EV_KEY, BTN_TOUCH, 1); + sd->activity = true; + } + input_event(input, EV_ABS, ABS_X, sd->x); + input_event(input, EV_ABS, ABS_Y, sd->y); + } + sd->first = false; +} + + +static int stantum_event(struct hid_device *hid, struct hid_field *field, + struct hid_usage *usage, __s32 value) +{ + struct stantum_data *sd = hid_get_drvdata(hid); + + if (hid->claimed & HID_CLAIMED_INPUT) { + struct input_dev *input = field->hidinput->input; + + switch (usage->hid) { + case HID_DG_INRANGE: + /* this is the last field in a finger */ + stantum_filter_event(sd, input); + break; + case HID_DG_WIDTH: + sd->w = value; + break; + case HID_DG_HEIGHT: + sd->h = value; + break; + case HID_GD_X: + sd->x = value; + break; + case HID_GD_Y: + sd->y = value; + break; + case HID_DG_TIPPRESSURE: + sd->z = value; + break; + case HID_DG_CONTACTID: + sd->id = value; + break; + case HID_DG_CONFIDENCE: + sd->valid = !!value; + break; + case 0xff000002: + /* this comes only before the first finger */ + sd->first = true; + break; + + default: + /* ignore the others */ + return 1; + } + } + + /* we have handled the hidinput part, now remains hiddev */ + if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event) + hid->hiddev_hid_event(hid, field, usage, value); + + return 1; +} + +static int stantum_probe(struct hid_device *hdev, + const struct hid_device_id *id) +{ + int ret; + struct stantum_data *sd; + + sd = kmalloc(sizeof(struct stantum_data), GFP_KERNEL); + if (!sd) { + dev_err(&hdev->dev, "cannot allocate Stantum data\n"); + return -ENOMEM; + } + sd->valid = false; + sd->first = false; + sd->activity = false; + hid_set_drvdata(hdev, sd); + + ret = hid_parse(hdev); + if (!ret) + ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT); + + if (ret) + kfree(sd); + + return ret; +} + +static void stantum_remove(struct hid_device *hdev) +{ + hid_hw_stop(hdev); + kfree(hid_get_drvdata(hdev)); + hid_set_drvdata(hdev, NULL); +} + +static const struct hid_device_id stantum_devices[] = { + { HID_USB_DEVICE(USB_VENDOR_ID_STANTUM, USB_DEVICE_ID_MTP) }, + { } +}; +MODULE_DEVICE_TABLE(hid, stantum_devices); + +static const struct hid_usage_id stantum_grabbed_usages[] = { + { HID_ANY_ID, HID_ANY_ID, HID_ANY_ID }, + { HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1} +}; + +static struct hid_driver stantum_driver = { + .name = "stantum", + .id_table = stantum_devices, + .probe = stantum_probe, + .remove = stantum_remove, + .input_mapping = stantum_input_mapping, + .input_mapped = stantum_input_mapped, + .usage_table = stantum_grabbed_usages, + .event = stantum_event, +}; + +static int __init stantum_init(void) +{ + return hid_register_driver(&stantum_driver); +} + +static void __exit stantum_exit(void) +{ + hid_unregister_driver(&stantum_driver); +} + +module_init(stantum_init); +module_exit(stantum_exit); + diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c index 12dcda5..8d3b46f 100644 --- a/drivers/hid/hid-wacom.c +++ b/drivers/hid/hid-wacom.c @@ -156,7 +156,9 @@ static int wacom_probe(struct hid_device *hdev, struct hid_input *hidinput; struct input_dev *input; struct wacom_data *wdata; + char rep_data[2]; int ret; + int limit; wdata = kzalloc(sizeof(*wdata), GFP_KERNEL); if (wdata == NULL) { @@ -166,6 +168,7 @@ static int wacom_probe(struct hid_device *hdev, hid_set_drvdata(hdev, wdata); + /* Parse the HID report now */ ret = hid_parse(hdev); if (ret) { dev_err(&hdev->dev, "parse failed\n"); @@ -178,6 +181,31 @@ static int wacom_probe(struct hid_device *hdev, goto err_free; } + /* + * Note that if the raw queries fail, it's not a hard failure and it + * is safe to continue + */ + + /* Set Wacom mode2 */ + rep_data[0] = 0x03; rep_data[1] = 0x00; + limit = 3; + do { + ret = hdev->hid_output_raw_report(hdev, rep_data, 2, + HID_FEATURE_REPORT); + } while (ret < 0 && limit-- > 0); + if (ret < 0) + dev_warn(&hdev->dev, "failed to poke device #1, %d\n", ret); + + /* 0x06 - high reporting speed, 0x05 - low speed */ + rep_data[0] = 0x06; rep_data[1] = 0x00; + limit = 3; + do { + ret = hdev->hid_output_raw_report(hdev, rep_data, 2, + HID_FEATURE_REPORT); + } while (ret < 0 && limit-- > 0); + if (ret < 0) + dev_warn(&hdev->dev, "failed to poke device #2, %d\n", ret); + hidinput = list_entry(hdev->inputs.next, struct hid_input, list); input = hidinput->input; diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c index cdd1369..d044767 100644 --- a/drivers/hid/hidraw.c +++ b/drivers/hid/hidraw.c @@ -134,7 +134,7 @@ static ssize_t hidraw_write(struct file *file, const char __user *buffer, size_t goto out; } - ret = dev->hid_output_raw_report(dev, buf, count); + ret = dev->hid_output_raw_report(dev, buf, count, HID_OUTPUT_REPORT); out: kfree(buf); return ret; diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index e2997a8..56d06cd 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -5,7 +5,7 @@ * Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz> * Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc * Copyright (c) 2007-2008 Oliver Neukum - * Copyright (c) 2006-2009 Jiri Kosina + * Copyright (c) 2006-2010 Jiri Kosina */ /* @@ -316,6 +316,7 @@ static int hid_submit_out(struct hid_device *hid) err_hid("usb_submit_urb(out) failed"); return -1; } + usbhid->last_out = jiffies; } else { /* * queue work to wake up the device. @@ -377,6 +378,7 @@ static int hid_submit_ctrl(struct hid_device *hid) err_hid("usb_submit_urb(ctrl) failed"); return -1; } + usbhid->last_ctrl = jiffies; } else { /* * queue work to wake up the device. @@ -512,9 +514,20 @@ static void __usbhid_submit_report(struct hid_device *hid, struct hid_report *re usbhid->out[usbhid->outhead].report = report; usbhid->outhead = head; - if (!test_and_set_bit(HID_OUT_RUNNING, &usbhid->iofl)) + if (!test_and_set_bit(HID_OUT_RUNNING, &usbhid->iofl)) { if (hid_submit_out(hid)) clear_bit(HID_OUT_RUNNING, &usbhid->iofl); + } else { + /* + * the queue is known to run + * but an earlier request may be stuck + * we may need to time out + * no race because this is called under + * spinlock + */ + if (time_after(jiffies, usbhid->last_out + HZ * 5)) + usb_unlink_urb(usbhid->urbout); + } return; } @@ -535,9 +548,20 @@ static void __usbhid_submit_report(struct hid_device *hid, struct hid_report *re usbhid->ctrl[usbhid->ctrlhead].dir = dir; usbhid->ctrlhead = head; - if (!test_and_set_bit(HID_CTRL_RUNNING, &usbhid->iofl)) + if (!test_and_set_bit(HID_CTRL_RUNNING, &usbhid->iofl)) { if (hid_submit_ctrl(hid)) clear_bit(HID_CTRL_RUNNING, &usbhid->iofl); + } else { + /* + * the queue is known to run + * but an earlier request may be stuck + * we may need to time out + * no race because this is called under + * spinlock + */ + if (time_after(jiffies, usbhid->last_ctrl + HZ * 5)) + usb_unlink_urb(usbhid->urbctrl); + } } void usbhid_submit_report(struct hid_device *hid, struct hid_report *report, unsigned char dir) @@ -774,7 +798,8 @@ static int hid_alloc_buffers(struct usb_device *dev, struct hid_device *hid) return 0; } -static int usbhid_output_raw_report(struct hid_device *hid, __u8 *buf, size_t count) +static int usbhid_output_raw_report(struct hid_device *hid, __u8 *buf, size_t count, + unsigned char report_type) { struct usbhid_device *usbhid = hid->driver_data; struct usb_device *dev = hid_to_usb_dev(hid); @@ -785,7 +810,7 @@ static int usbhid_output_raw_report(struct hid_device *hid, __u8 *buf, size_t co ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), HID_REQ_SET_REPORT, USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - ((HID_OUTPUT_REPORT + 1) << 8) | *buf, + ((report_type + 1) << 8) | *buf, interface->desc.bInterfaceNumber, buf + 1, count - 1, USB_CTRL_SET_TIMEOUT); @@ -981,9 +1006,6 @@ static int usbhid_start(struct hid_device *hid) spin_lock_init(&usbhid->lock); - usbhid->intf = intf; - usbhid->ifnum = interface->desc.bInterfaceNumber; - usbhid->urbctrl = usb_alloc_urb(0, GFP_KERNEL); if (!usbhid->urbctrl) { ret = -ENOMEM; @@ -1154,6 +1176,8 @@ static int usbhid_probe(struct usb_interface *intf, const struct usb_device_id * hid->driver_data = usbhid; usbhid->hid = hid; + usbhid->intf = intf; + usbhid->ifnum = interface->desc.bInterfaceNumber; ret = hid_add_device(hid); if (ret) { @@ -1342,7 +1366,7 @@ static int hid_reset_resume(struct usb_interface *intf) #endif /* CONFIG_PM */ -static struct usb_device_id hid_usb_ids [] = { +static const struct usb_device_id hid_usb_ids[] = { { .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS, .bInterfaceClass = USB_INTERFACE_CLASS_HID }, { } /* Terminating entry */ diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c index 38773dc..7844280 100644 --- a/drivers/hid/usbhid/hid-quirks.c +++ b/drivers/hid/usbhid/hid-quirks.c @@ -43,8 +43,10 @@ static const struct hid_blacklist { { USB_VENDOR_ID_AFATECH, USB_DEVICE_ID_AFATECH_AF9016, HID_QUIRK_FULLSPEED_INTERVAL }, + { USB_VENDOR_ID_ETURBOTOUCH, USB_DEVICE_ID_ETURBOTOUCH, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_PANTHERLORD, USB_DEVICE_ID_PANTHERLORD_TWIN_USB_JOYSTICK, HID_QUIRK_MULTI_INPUT | HID_QUIRK_SKIP_OUTPUT_REPORTS }, { USB_VENDOR_ID_PLAYDOTCOM, USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII, HID_QUIRK_MULTI_INPUT }, + { USB_VENDOR_ID_TOUCHPACK, USB_DEVICE_ID_TOUCHPACK_RTS, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_UC100KM, HID_QUIRK_NOGET }, { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS124U, HID_QUIRK_NOGET }, @@ -57,6 +59,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_3AXIS_5BUTTON_STICK, HID_QUIRK_NOGET }, { USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET }, { USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET }, + { USB_VENDOR_ID_PRODIGE, USB_DEVICE_ID_PRODIGE_CORDLESS, HID_QUIRK_NOGET }, { USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET }, { USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_TURBOX_KEYBOARD, HID_QUIRK_NOGET }, { USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_PF1209, HID_QUIRK_MULTI_INPUT }, diff --git a/drivers/hid/usbhid/usbhid.h b/drivers/hid/usbhid/usbhid.h index 08f505c..ec20400 100644 --- a/drivers/hid/usbhid/usbhid.h +++ b/drivers/hid/usbhid/usbhid.h @@ -80,12 +80,14 @@ struct usbhid_device { unsigned char ctrlhead, ctrltail; /* Control fifo head & tail */ char *ctrlbuf; /* Control buffer */ dma_addr_t ctrlbuf_dma; /* Control buffer dma */ + unsigned long last_ctrl; /* record of last output for timeouts */ struct urb *urbout; /* Output URB */ struct hid_output_fifo out[HID_CONTROL_FIFO_SIZE]; /* Output pipe fifo */ unsigned char outhead, outtail; /* Output pipe fifo head & tail */ char *outbuf; /* Output buffer */ dma_addr_t outbuf_dma; /* Output buffer dma */ + unsigned long last_out; /* record of last output for timeouts */ spinlock_t lock; /* fifo spinlock */ unsigned long iofl; /* I/O flags (CTRL_RUNNING, OUT_RUNNING) */ diff --git a/drivers/input/input-polldev.c b/drivers/input/input-polldev.c index aa6713b..291d939 100644 --- a/drivers/input/input-polldev.c +++ b/drivers/input/input-polldev.c @@ -100,6 +100,12 @@ static void input_close_polled_device(struct input_dev *input) struct input_polled_dev *dev = input_get_drvdata(input); cancel_delayed_work_sync(&dev->work); + /* + * Clean up work struct to remove references to the workqueue. + * It may be destroyed by the next call. This causes problems + * at next device open-close in case of poll_interval == 0. + */ + INIT_DELAYED_WORK(&dev->work, dev->work.work.func); input_polldev_stop_workqueue(); if (dev->close) diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index d84a36e..b54aee7 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -1161,9 +1161,17 @@ static int i8042_pm_restore(struct device *dev) return 0; } +static int i8042_pm_thaw(struct device *dev) +{ + i8042_interrupt(0, NULL); + + return 0; +} + static const struct dev_pm_ops i8042_pm_ops = { .suspend = i8042_pm_reset, .resume = i8042_pm_restore, + .thaw = i8042_pm_thaw, .poweroff = i8042_pm_reset, .restore = i8042_pm_restore, }; diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c index 09a5e73..5256123 100644 --- a/drivers/input/touchscreen/usbtouchscreen.c +++ b/drivers/input/touchscreen/usbtouchscreen.c @@ -618,8 +618,8 @@ static int idealtek_read_data(struct usbtouch_usb *dev, unsigned char *pkt) #ifdef CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH static int general_touch_read_data(struct usbtouch_usb *dev, unsigned char *pkt) { - dev->x = ((pkt[2] & 0x0F) << 8) | pkt[1] ; - dev->y = ((pkt[4] & 0x0F) << 8) | pkt[3] ; + dev->x = (pkt[2] << 8) | pkt[1]; + dev->y = (pkt[4] << 8) | pkt[3]; dev->press = pkt[5] & 0xff; dev->touch = pkt[0] & 0x01; @@ -809,9 +809,9 @@ static struct usbtouch_device_info usbtouch_dev_info[] = { #ifdef CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH [DEVTYPE_GENERAL_TOUCH] = { .min_xc = 0x0, - .max_xc = 0x0500, + .max_xc = 0x7fff, .min_yc = 0x0, - .max_yc = 0x0500, + .max_yc = 0x7fff, .rept_size = 7, .read_data = general_touch_read_data, }, diff --git a/drivers/macintosh/adb.c b/drivers/macintosh/adb.c index 23741ce..d840a10 100644 --- a/drivers/macintosh/adb.c +++ b/drivers/macintosh/adb.c @@ -322,8 +322,8 @@ static int __init adb_init(void) adb_controller = NULL; } else { #ifdef CONFIG_PPC - if (machine_is_compatible("AAPL,PowerBook1998") || - machine_is_compatible("PowerBook1,1")) + if (of_machine_is_compatible("AAPL,PowerBook1998") || + of_machine_is_compatible("PowerBook1,1")) sleepy_trackpad = 1; #endif /* CONFIG_PPC */ diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c index 454bc50..5738d8b 100644 --- a/drivers/macintosh/therm_pm72.c +++ b/drivers/macintosh/therm_pm72.c @@ -1899,7 +1899,7 @@ static int create_control_loops(void) */ if (rackmac) cpu_pid_type = CPU_PID_TYPE_RACKMAC; - else if (machine_is_compatible("PowerMac7,3") + else if (of_machine_is_compatible("PowerMac7,3") && (cpu_count > 1) && fcu_fans[CPUA_PUMP_RPM_INDEX].id != FCU_FAN_ABSENT_ID && fcu_fans[CPUB_PUMP_RPM_INDEX].id != FCU_FAN_ABSENT_ID) { @@ -2234,10 +2234,10 @@ static int __init therm_pm72_init(void) { struct device_node *np; - rackmac = machine_is_compatible("RackMac3,1"); + rackmac = of_machine_is_compatible("RackMac3,1"); - if (!machine_is_compatible("PowerMac7,2") && - !machine_is_compatible("PowerMac7,3") && + if (!of_machine_is_compatible("PowerMac7,2") && + !of_machine_is_compatible("PowerMac7,3") && !rackmac) return -ENODEV; diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c index ba48fd7..7fb8b4d 100644 --- a/drivers/macintosh/therm_windtunnel.c +++ b/drivers/macintosh/therm_windtunnel.c @@ -490,7 +490,7 @@ g4fan_init( void ) info = of_get_property(np, "thermal-info", NULL); of_node_put(np); - if( !info || !machine_is_compatible("PowerMac3,6") ) + if( !info || !of_machine_is_compatible("PowerMac3,6") ) return -ENODEV; if( info->id != 3 ) { diff --git a/drivers/macintosh/via-pmu-backlight.c b/drivers/macintosh/via-pmu-backlight.c index a348bb0..4f3c447 100644 --- a/drivers/macintosh/via-pmu-backlight.c +++ b/drivers/macintosh/via-pmu-backlight.c @@ -150,13 +150,13 @@ void __init pmu_backlight_init() /* Special case for the old PowerBook since I can't test on it */ autosave = - machine_is_compatible("AAPL,3400/2400") || - machine_is_compatible("AAPL,3500"); + of_machine_is_compatible("AAPL,3400/2400") || + of_machine_is_compatible("AAPL,3500"); if (!autosave && !pmac_has_backlight_type("pmu") && - !machine_is_compatible("AAPL,PowerBook1998") && - !machine_is_compatible("PowerBook1,1")) + !of_machine_is_compatible("AAPL,PowerBook1998") && + !of_machine_is_compatible("PowerBook1,1")) return; snprintf(name, sizeof(name), "pmubl"); diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c index db379c3..4276484 100644 --- a/drivers/macintosh/via-pmu.c +++ b/drivers/macintosh/via-pmu.c @@ -463,8 +463,8 @@ static int __init via_pmu_dev_init(void) #endif #ifdef CONFIG_PPC32 - if (machine_is_compatible("AAPL,3400/2400") || - machine_is_compatible("AAPL,3500")) { + if (of_machine_is_compatible("AAPL,3400/2400") || + of_machine_is_compatible("AAPL,3500")) { int mb = pmac_call_feature(PMAC_FTR_GET_MB_INFO, NULL, PMAC_MB_INFO_MODEL, 0); pmu_battery_count = 1; @@ -472,8 +472,8 @@ static int __init via_pmu_dev_init(void) pmu_batteries[0].flags |= PMU_BATT_TYPE_COMET; else pmu_batteries[0].flags |= PMU_BATT_TYPE_HOOPER; - } else if (machine_is_compatible("AAPL,PowerBook1998") || - machine_is_compatible("PowerBook1,1")) { + } else if (of_machine_is_compatible("AAPL,PowerBook1998") || + of_machine_is_compatible("PowerBook1,1")) { pmu_battery_count = 2; pmu_batteries[0].flags |= PMU_BATT_TYPE_SMART; pmu_batteries[1].flags |= PMU_BATT_TYPE_SMART; diff --git a/drivers/macintosh/windfarm_core.c b/drivers/macintosh/windfarm_core.c index 075b4d9..437f55c 100644 --- a/drivers/macintosh/windfarm_core.c +++ b/drivers/macintosh/windfarm_core.c @@ -468,9 +468,9 @@ static int __init windfarm_core_init(void) DBG("wf: core loaded\n"); /* Don't register on old machines that use therm_pm72 for now */ - if (machine_is_compatible("PowerMac7,2") || - machine_is_compatible("PowerMac7,3") || - machine_is_compatible("RackMac3,1")) + if (of_machine_is_compatible("PowerMac7,2") || + of_machine_is_compatible("PowerMac7,3") || + of_machine_is_compatible("RackMac3,1")) return -ENODEV; platform_device_register(&wf_platform_device); return 0; diff --git a/drivers/macintosh/windfarm_cpufreq_clamp.c b/drivers/macintosh/windfarm_cpufreq_clamp.c index 900aade..1a77a7c 100644 --- a/drivers/macintosh/windfarm_cpufreq_clamp.c +++ b/drivers/macintosh/windfarm_cpufreq_clamp.c @@ -76,9 +76,9 @@ static int __init wf_cpufreq_clamp_init(void) struct wf_control *clamp; /* Don't register on old machines that use therm_pm72 for now */ - if (machine_is_compatible("PowerMac7,2") || - machine_is_compatible("PowerMac7,3") || - machine_is_compatible("RackMac3,1")) + if (of_machine_is_compatible("PowerMac7,2") || + of_machine_is_compatible("PowerMac7,3") || + of_machine_is_compatible("RackMac3,1")) return -ENODEV; clamp = kmalloc(sizeof(struct wf_control), GFP_KERNEL); diff --git a/drivers/macintosh/windfarm_lm75_sensor.c b/drivers/macintosh/windfarm_lm75_sensor.c index ed6426a..d8257d3 100644 --- a/drivers/macintosh/windfarm_lm75_sensor.c +++ b/drivers/macintosh/windfarm_lm75_sensor.c @@ -239,9 +239,9 @@ static struct i2c_driver wf_lm75_driver = { static int __init wf_lm75_sensor_init(void) { /* Don't register on old machines that use therm_pm72 for now */ - if (machine_is_compatible("PowerMac7,2") || - machine_is_compatible("PowerMac7,3") || - machine_is_compatible("RackMac3,1")) + if (of_machine_is_compatible("PowerMac7,2") || + of_machine_is_compatible("PowerMac7,3") || + of_machine_is_compatible("RackMac3,1")) return -ENODEV; return i2c_add_driver(&wf_lm75_driver); } diff --git a/drivers/macintosh/windfarm_max6690_sensor.c b/drivers/macintosh/windfarm_max6690_sensor.c index a67b349..b486eb9 100644 --- a/drivers/macintosh/windfarm_max6690_sensor.c +++ b/drivers/macintosh/windfarm_max6690_sensor.c @@ -188,9 +188,9 @@ static struct i2c_driver wf_max6690_driver = { static int __init wf_max6690_sensor_init(void) { /* Don't register on old machines that use therm_pm72 for now */ - if (machine_is_compatible("PowerMac7,2") || - machine_is_compatible("PowerMac7,3") || - machine_is_compatible("RackMac3,1")) + if (of_machine_is_compatible("PowerMac7,2") || + of_machine_is_compatible("PowerMac7,3") || + of_machine_is_compatible("RackMac3,1")) return -ENODEV; return i2c_add_driver(&wf_max6690_driver); } diff --git a/drivers/macintosh/windfarm_pm112.c b/drivers/macintosh/windfarm_pm112.c index 73d695d..e0ee807 100644 --- a/drivers/macintosh/windfarm_pm112.c +++ b/drivers/macintosh/windfarm_pm112.c @@ -676,7 +676,7 @@ static int __init wf_pm112_init(void) { struct device_node *cpu; - if (!machine_is_compatible("PowerMac11,2")) + if (!of_machine_is_compatible("PowerMac11,2")) return -ENODEV; /* Count the number of CPU cores */ diff --git a/drivers/macintosh/windfarm_pm121.c b/drivers/macintosh/windfarm_pm121.c index 66ec4fb1..947d4af 100644 --- a/drivers/macintosh/windfarm_pm121.c +++ b/drivers/macintosh/windfarm_pm121.c @@ -1008,7 +1008,7 @@ static int __init pm121_init(void) { int rc = -ENODEV; - if (machine_is_compatible("PowerMac12,1")) + if (of_machine_is_compatible("PowerMac12,1")) rc = pm121_init_pm(); if (rc == 0) { diff --git a/drivers/macintosh/windfarm_pm81.c b/drivers/macintosh/windfarm_pm81.c index abbe206..565d5b2 100644 --- a/drivers/macintosh/windfarm_pm81.c +++ b/drivers/macintosh/windfarm_pm81.c @@ -779,8 +779,8 @@ static int __init wf_smu_init(void) { int rc = -ENODEV; - if (machine_is_compatible("PowerMac8,1") || - machine_is_compatible("PowerMac8,2")) + if (of_machine_is_compatible("PowerMac8,1") || + of_machine_is_compatible("PowerMac8,2")) rc = wf_init_pm(); if (rc == 0) { diff --git a/drivers/macintosh/windfarm_pm91.c b/drivers/macintosh/windfarm_pm91.c index 764c525..bea9916 100644 --- a/drivers/macintosh/windfarm_pm91.c +++ b/drivers/macintosh/windfarm_pm91.c @@ -711,7 +711,7 @@ static int __init wf_smu_init(void) { int rc = -ENODEV; - if (machine_is_compatible("PowerMac9,1")) + if (of_machine_is_compatible("PowerMac9,1")) rc = wf_init_pm(); if (rc == 0) { diff --git a/drivers/macintosh/windfarm_smu_sensors.c b/drivers/macintosh/windfarm_smu_sensors.c index 9c567b9..3c19350 100644 --- a/drivers/macintosh/windfarm_smu_sensors.c +++ b/drivers/macintosh/windfarm_smu_sensors.c @@ -363,9 +363,9 @@ smu_cpu_power_create(struct wf_sensor *volts, struct wf_sensor *amps) * I yet have to figure out what's up with 8,2 and will have to * adjust for later, unless we can 100% trust the SDB partition... */ - if ((machine_is_compatible("PowerMac8,1") || - machine_is_compatible("PowerMac8,2") || - machine_is_compatible("PowerMac9,1")) && + if ((of_machine_is_compatible("PowerMac8,1") || + of_machine_is_compatible("PowerMac8,2") || + of_machine_is_compatible("PowerMac9,1")) && cpuvcp_version >= 2) { pow->quadratic = 1; DBG("windfarm: CPU Power using quadratic transform\n"); diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index 1b24989..465295b 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -112,11 +112,13 @@ config DVB_USB_CXUSB select DVB_MT352 if !DVB_FE_CUSTOMISE select DVB_ZL10353 if !DVB_FE_CUSTOMISE select DVB_DIB7000P if !DVB_FE_CUSTOMISE - select DVB_LGS8GL5 if !DVB_FE_CUSTOMISE select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE + select DVB_ATBM8830 if !DVB_FE_CUSTOMISE + select DVB_LGS8GXX if !DVB_FE_CUSTOMISE select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE + select MEDIA_TUNER_MAX2165 if !MEDIA_TUNER_CUSTOMISE help Say Y here to support the Conexant USB2.0 hybrid reference design. Currently, only DVB and ATSC modes are supported, analog mode diff --git a/drivers/media/dvb/frontends/l64781.c b/drivers/media/dvb/frontends/l64781.c index 3051b64..445fa10 100644 --- a/drivers/media/dvb/frontends/l64781.c +++ b/drivers/media/dvb/frontends/l64781.c @@ -192,8 +192,8 @@ static int apply_frontend_param (struct dvb_frontend* fe, struct dvb_frontend_pa spi_bias *= qam_tab[p->constellation]; spi_bias /= p->code_rate_HP + 1; spi_bias /= (guard_tab[p->guard_interval] + 32); - spi_bias *= 1000ULL; - spi_bias /= 1000ULL + ppm/1000; + spi_bias *= 1000; + spi_bias /= 1000 + ppm/1000; spi_bias *= p->code_rate_HP; val0x04 = (p->transmission_mode << 2) | p->guard_interval; diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index 3182a40..ae08b07 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -4461,6 +4461,7 @@ static int __devinit bttv_probe(struct pci_dev *dev, request_modules(btv); } + init_bttv_i2c_ir(btv); bttv_input_init(btv); /* everything is fine */ diff --git a/drivers/media/video/bt8xx/bttv-i2c.c b/drivers/media/video/bt8xx/bttv-i2c.c index 63aa31a..407fa61 100644 --- a/drivers/media/video/bt8xx/bttv-i2c.c +++ b/drivers/media/video/bt8xx/bttv-i2c.c @@ -388,7 +388,12 @@ int __devinit init_bttv_i2c(struct bttv *btv) if (0 == btv->i2c_rc && i2c_scan) do_i2c_scan(btv->c.v4l2_dev.name, &btv->i2c_client); - /* Instantiate the IR receiver device, if present */ + return btv->i2c_rc; +} + +/* Instantiate the I2C IR receiver device, if present */ +void __devinit init_bttv_i2c_ir(struct bttv *btv) +{ if (0 == btv->i2c_rc) { struct i2c_board_info info; /* The external IR receiver is at i2c address 0x34 (0x35 for @@ -408,7 +413,6 @@ int __devinit init_bttv_i2c(struct bttv *btv) strlcpy(info.type, "ir_video", I2C_NAME_SIZE); i2c_new_probed_device(&btv->c.i2c_adap, &info, addr_list); } - return btv->i2c_rc; } int __devexit fini_bttv_i2c(struct bttv *btv) diff --git a/drivers/media/video/bt8xx/bttvp.h b/drivers/media/video/bt8xx/bttvp.h index a1d0e9c..6cccc2a 100644 --- a/drivers/media/video/bt8xx/bttvp.h +++ b/drivers/media/video/bt8xx/bttvp.h @@ -279,6 +279,7 @@ extern unsigned int bttv_debug; extern unsigned int bttv_gpio; extern void bttv_gpio_tracking(struct bttv *btv, char *comment); extern int init_bttv_i2c(struct bttv *btv); +extern void init_bttv_i2c_ir(struct bttv *btv); extern int fini_bttv_i2c(struct bttv *btv); #define bttv_printk if (bttv_verbose) printk diff --git a/drivers/media/video/mt9t112.c b/drivers/media/video/mt9t112.c index fc4dd60..7438f8d 100644 --- a/drivers/media/video/mt9t112.c +++ b/drivers/media/video/mt9t112.c @@ -514,7 +514,7 @@ static int mt9t112_init_pll(const struct i2c_client *client) /* poll to verify out of standby. Must Poll this bit */ for (i = 0; i < 100; i++) { mt9t112_reg_read(data, client, 0x0018); - if (0x4000 & data) + if (!(0x4000 & data)) break; mdelay(10); diff --git a/drivers/media/video/pwc/pwc-ctrl.c b/drivers/media/video/pwc/pwc-ctrl.c index 50b415e..f7f7e04 100644 --- a/drivers/media/video/pwc/pwc-ctrl.c +++ b/drivers/media/video/pwc/pwc-ctrl.c @@ -753,7 +753,7 @@ int pwc_set_shutter_speed(struct pwc_device *pdev, int mode, int value) buf[0] = 0xff; /* fixed */ ret = send_control_msg(pdev, - SET_LUM_CTL, SHUTTER_MODE_FORMATTER, &buf, sizeof(buf)); + SET_LUM_CTL, SHUTTER_MODE_FORMATTER, &buf, 1); if (!mode && ret >= 0) { if (value < 0) diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c index fee6eee..006cb2e 100644 --- a/drivers/net/benet/be_cmds.c +++ b/drivers/net/benet/be_cmds.c @@ -296,6 +296,7 @@ static void be_cmd_hdr_prepare(struct be_cmd_req_hdr *req_hdr, req_hdr->opcode = opcode; req_hdr->subsystem = subsystem; req_hdr->request_length = cpu_to_le32(cmd_len - sizeof(*req_hdr)); + req_hdr->version = 0; } static void be_cmd_page_addrs_prepare(struct phys_addr *pages, u32 max_pages, diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index d29bb53..7655436 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -4006,11 +4006,21 @@ check_page: } } - if (!buffer_info->dma) + if (!buffer_info->dma) { buffer_info->dma = pci_map_page(pdev, buffer_info->page, 0, buffer_info->length, PCI_DMA_FROMDEVICE); + if (pci_dma_mapping_error(pdev, buffer_info->dma)) { + put_page(buffer_info->page); + dev_kfree_skb(skb); + buffer_info->page = NULL; + buffer_info->skb = NULL; + buffer_info->dma = 0; + adapter->alloc_rx_buff_failed++; + break; /* while !buffer_info->skb */ + } + } rx_desc = E1000_RX_DESC(*rx_ring, i); rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma); @@ -4101,6 +4111,13 @@ map_skb: skb->data, buffer_info->length, PCI_DMA_FROMDEVICE); + if (pci_dma_mapping_error(pdev, buffer_info->dma)) { + dev_kfree_skb(skb); + buffer_info->skb = NULL; + buffer_info->dma = 0; + adapter->alloc_rx_buff_failed++; + break; /* while !buffer_info->skb */ + } /* * XXX if it was allocated cleanly it will never map to a diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c index 3103f41..35a06b4 100644 --- a/drivers/net/ixgbe/ixgbe_82598.c +++ b/drivers/net/ixgbe/ixgbe_82598.c @@ -357,12 +357,34 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw, s32 packetbuf_num) u32 fctrl_reg; u32 rmcs_reg; u32 reg; + u32 link_speed = 0; + bool link_up; #ifdef CONFIG_DCB if (hw->fc.requested_mode == ixgbe_fc_pfc) goto out; #endif /* CONFIG_DCB */ + /* + * On 82598 having Rx FC on causes resets while doing 1G + * so if it's on turn it off once we know link_speed. For + * more details see 82598 Specification update. + */ + hw->mac.ops.check_link(hw, &link_speed, &link_up, false); + if (link_up && link_speed == IXGBE_LINK_SPEED_1GB_FULL) { + switch (hw->fc.requested_mode) { + case ixgbe_fc_full: + hw->fc.requested_mode = ixgbe_fc_tx_pause; + break; + case ixgbe_fc_rx_pause: + hw->fc.requested_mode = ixgbe_fc_none; + break; + default: + /* no change */ + break; + } + } + /* Negotiate the fc mode to use */ ret_val = ixgbe_fc_autoneg(hw); if (ret_val) diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 7b7c848..951b73c 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -5763,6 +5763,10 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, if (err) goto err_sw_init; + /* Make it possible the adapter to be woken up via WOL */ + if (adapter->hw.mac.type == ixgbe_mac_82599EB) + IXGBE_WRITE_REG(&adapter->hw, IXGBE_WUS, ~0); + /* * If there is a fan on this device and it has failed log the * failure. diff --git a/drivers/net/mace.c b/drivers/net/mace.c index d9fbad3..43aea91 100644 --- a/drivers/net/mace.c +++ b/drivers/net/mace.c @@ -206,7 +206,7 @@ static int __devinit mace_probe(struct macio_dev *mdev, const struct of_device_i mp->port_aaui = port_aaui; else { /* Apple Network Server uses the AAUI port */ - if (machine_is_compatible("AAPL,ShinerESB")) + if (of_machine_is_compatible("AAPL,ShinerESB")) mp->port_aaui = 1; else { #ifdef CONFIG_MACE_AAUI_PORT diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c index 103e8b0..46997e1 100644 --- a/drivers/net/sfc/efx.c +++ b/drivers/net/sfc/efx.c @@ -2284,6 +2284,7 @@ static int __devinit efx_pci_probe(struct pci_dev *pci_dev, fail2: efx_fini_struct(efx); fail1: + WARN_ON(rc > 0); EFX_LOG(efx, "initialisation failed. rc=%d\n", rc); free_netdev(net_dev); return rc; diff --git a/drivers/net/sfc/falcon_boards.c b/drivers/net/sfc/falcon_boards.c index bf0b96a..5712fdd 100644 --- a/drivers/net/sfc/falcon_boards.c +++ b/drivers/net/sfc/falcon_boards.c @@ -29,6 +29,15 @@ #define FALCON_BOARD_SFN4111T 0x51 #define FALCON_BOARD_SFN4112F 0x52 +/* Board temperature is about 15°C above ambient when air flow is + * limited. */ +#define FALCON_BOARD_TEMP_BIAS 15 + +/* SFC4000 datasheet says: 'The maximum permitted junction temperature + * is 125°C; the thermal design of the environment for the SFC4000 + * should aim to keep this well below 100°C.' */ +#define FALCON_JUNC_TEMP_MAX 90 + /***************************************************************************** * Support for LM87 sensor chip used on several boards */ @@ -548,16 +557,16 @@ fail_hwmon: static u8 sfe4002_lm87_channel = 0x03; /* use AIN not FAN inputs */ static const u8 sfe4002_lm87_regs[] = { - LM87_IN_LIMITS(0, 0x83, 0x91), /* 2.5V: 1.8V +/- 5% */ - LM87_IN_LIMITS(1, 0x51, 0x5a), /* Vccp1: 1.2V +/- 5% */ - LM87_IN_LIMITS(2, 0xb6, 0xca), /* 3.3V: 3.3V +/- 5% */ - LM87_IN_LIMITS(3, 0xb0, 0xc9), /* 5V: 4.6-5.2V */ - LM87_IN_LIMITS(4, 0xb0, 0xe0), /* 12V: 11-14V */ - LM87_IN_LIMITS(5, 0x44, 0x4b), /* Vccp2: 1.0V +/- 5% */ - LM87_AIN_LIMITS(0, 0xa0, 0xb2), /* AIN1: 1.66V +/- 5% */ - LM87_AIN_LIMITS(1, 0x91, 0xa1), /* AIN2: 1.5V +/- 5% */ - LM87_TEMP_INT_LIMITS(10, 60), /* board */ - LM87_TEMP_EXT1_LIMITS(10, 70), /* Falcon */ + LM87_IN_LIMITS(0, 0x7c, 0x99), /* 2.5V: 1.8V +/- 10% */ + LM87_IN_LIMITS(1, 0x4c, 0x5e), /* Vccp1: 1.2V +/- 10% */ + LM87_IN_LIMITS(2, 0xac, 0xd4), /* 3.3V: 3.3V +/- 10% */ + LM87_IN_LIMITS(3, 0xac, 0xd4), /* 5V: 5.0V +/- 10% */ + LM87_IN_LIMITS(4, 0xac, 0xe0), /* 12V: 10.8-14V */ + LM87_IN_LIMITS(5, 0x3f, 0x4f), /* Vccp2: 1.0V +/- 10% */ + LM87_AIN_LIMITS(0, 0x98, 0xbb), /* AIN1: 1.66V +/- 10% */ + LM87_AIN_LIMITS(1, 0x8a, 0xa9), /* AIN2: 1.5V +/- 10% */ + LM87_TEMP_INT_LIMITS(0, 80 + FALCON_BOARD_TEMP_BIAS), + LM87_TEMP_EXT1_LIMITS(0, FALCON_JUNC_TEMP_MAX), 0 }; @@ -619,14 +628,14 @@ static int sfe4002_init(struct efx_nic *efx) static u8 sfn4112f_lm87_channel = 0x03; /* use AIN not FAN inputs */ static const u8 sfn4112f_lm87_regs[] = { - LM87_IN_LIMITS(0, 0x83, 0x91), /* 2.5V: 1.8V +/- 5% */ - LM87_IN_LIMITS(1, 0x51, 0x5a), /* Vccp1: 1.2V +/- 5% */ - LM87_IN_LIMITS(2, 0xb6, 0xca), /* 3.3V: 3.3V +/- 5% */ - LM87_IN_LIMITS(4, 0xb0, 0xe0), /* 12V: 11-14V */ - LM87_IN_LIMITS(5, 0x44, 0x4b), /* Vccp2: 1.0V +/- 5% */ - LM87_AIN_LIMITS(1, 0x91, 0xa1), /* AIN2: 1.5V +/- 5% */ - LM87_TEMP_INT_LIMITS(10, 60), /* board */ - LM87_TEMP_EXT1_LIMITS(10, 70), /* Falcon */ + LM87_IN_LIMITS(0, 0x7c, 0x99), /* 2.5V: 1.8V +/- 10% */ + LM87_IN_LIMITS(1, 0x4c, 0x5e), /* Vccp1: 1.2V +/- 10% */ + LM87_IN_LIMITS(2, 0xac, 0xd4), /* 3.3V: 3.3V +/- 10% */ + LM87_IN_LIMITS(4, 0xac, 0xe0), /* 12V: 10.8-14V */ + LM87_IN_LIMITS(5, 0x3f, 0x4f), /* Vccp2: 1.0V +/- 10% */ + LM87_AIN_LIMITS(1, 0x8a, 0xa9), /* AIN2: 1.5V +/- 10% */ + LM87_TEMP_INT_LIMITS(0, 60 + FALCON_BOARD_TEMP_BIAS), + LM87_TEMP_EXT1_LIMITS(0, FALCON_JUNC_TEMP_MAX), 0 }; diff --git a/drivers/net/sfc/mcdi.c b/drivers/net/sfc/mcdi.c index 9f035b9..f66b3da 100644 --- a/drivers/net/sfc/mcdi.c +++ b/drivers/net/sfc/mcdi.c @@ -127,7 +127,7 @@ static int efx_mcdi_poll(struct efx_nic *efx) efx_dword_t reg; /* Check for a reboot atomically with respect to efx_mcdi_copyout() */ - rc = efx_mcdi_poll_reboot(efx); + rc = -efx_mcdi_poll_reboot(efx); if (rc) goto out; diff --git a/drivers/net/sfc/qt202x_phy.c b/drivers/net/sfc/qt202x_phy.c index e0d13a4..67eec7a 100644 --- a/drivers/net/sfc/qt202x_phy.c +++ b/drivers/net/sfc/qt202x_phy.c @@ -320,7 +320,7 @@ static int qt202x_reset_phy(struct efx_nic *efx) falcon_board(efx)->type->init_phy(efx); - return rc; + return 0; fail: EFX_ERR(efx, "PHY reset timed out\n"); diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c index 75a669d..d71c197 100644 --- a/drivers/net/tc35815.c +++ b/drivers/net/tc35815.c @@ -1437,7 +1437,6 @@ static int tc35815_do_interrupt(struct net_device *dev, u32 status, int limit) /* Transmit complete. */ lp->lstats.tx_ints++; tc35815_txdone(dev); - netif_wake_queue(dev); if (ret < 0) ret = 0; } diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c index 4f27f02..5f3b9ea 100644 --- a/drivers/net/usb/cdc_ether.c +++ b/drivers/net/usb/cdc_ether.c @@ -584,6 +584,11 @@ static const struct usb_device_id products [] = { USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), .driver_info = (unsigned long) &mbm_info, }, { + /* Ericsson C3607w ver 2 */ + USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x190b, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &mbm_info, +}, { /* Toshiba F3507g */ USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x130b, USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index c93f58f..317aa34 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -1877,13 +1877,12 @@ static void velocity_error(struct velocity_info *vptr, int status) /** * tx_srv - transmit interrupt service * @vptr; Velocity - * @status: * * Scan the queues looking for transmitted packets that * we can complete and clean up. Update any statistics as * necessary/ */ -static int velocity_tx_srv(struct velocity_info *vptr, u32 status) +static int velocity_tx_srv(struct velocity_info *vptr) { struct tx_desc *td; int qnum; @@ -2090,14 +2089,12 @@ static int velocity_receive_frame(struct velocity_info *vptr, int idx) /** * velocity_rx_srv - service RX interrupt * @vptr: velocity - * @status: adapter status (unused) * * Walk the receive ring of the velocity adapter and remove * any received packets from the receive queue. Hand the ring * slots back to the adapter for reuse. */ -static int velocity_rx_srv(struct velocity_info *vptr, int status, - int budget_left) +static int velocity_rx_srv(struct velocity_info *vptr, int budget_left) { struct net_device_stats *stats = &vptr->dev->stats; int rd_curr = vptr->rx.curr; @@ -2151,32 +2148,24 @@ static int velocity_poll(struct napi_struct *napi, int budget) struct velocity_info *vptr = container_of(napi, struct velocity_info, napi); unsigned int rx_done; - u32 isr_status; - - spin_lock(&vptr->lock); - isr_status = mac_read_isr(vptr->mac_regs); - - /* Ack the interrupt */ - mac_write_isr(vptr->mac_regs, isr_status); - if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI))) - velocity_error(vptr, isr_status); + unsigned long flags; + spin_lock_irqsave(&vptr->lock, flags); /* * Do rx and tx twice for performance (taken from the VIA * out-of-tree driver). */ - rx_done = velocity_rx_srv(vptr, isr_status, budget / 2); - velocity_tx_srv(vptr, isr_status); - rx_done += velocity_rx_srv(vptr, isr_status, budget - rx_done); - velocity_tx_srv(vptr, isr_status); - - spin_unlock(&vptr->lock); + rx_done = velocity_rx_srv(vptr, budget / 2); + velocity_tx_srv(vptr); + rx_done += velocity_rx_srv(vptr, budget - rx_done); + velocity_tx_srv(vptr); /* If budget not fully consumed, exit the polling mode */ if (rx_done < budget) { napi_complete(napi); mac_enable_int(vptr->mac_regs); } + spin_unlock_irqrestore(&vptr->lock, flags); return rx_done; } @@ -2206,10 +2195,17 @@ static irqreturn_t velocity_intr(int irq, void *dev_instance) return IRQ_NONE; } + /* Ack the interrupt */ + mac_write_isr(vptr->mac_regs, isr_status); + if (likely(napi_schedule_prep(&vptr->napi))) { mac_disable_int(vptr->mac_regs); __napi_schedule(&vptr->napi); } + + if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI))) + velocity_error(vptr, isr_status); + spin_unlock(&vptr->lock); return IRQ_HANDLED; @@ -3100,7 +3096,7 @@ static int velocity_resume(struct pci_dev *pdev) velocity_init_registers(vptr, VELOCITY_INIT_WOL); mac_disable_int(vptr->mac_regs); - velocity_tx_srv(vptr, 0); + velocity_tx_srv(vptr); for (i = 0; i < vptr->tx.numq; i++) { if (vptr->tx.used[i]) @@ -3344,6 +3340,7 @@ static int velocity_set_coalesce(struct net_device *dev, { struct velocity_info *vptr = netdev_priv(dev); int max_us = 0x3f * 64; + unsigned long flags; /* 6 bits of */ if (ecmd->tx_coalesce_usecs > max_us) @@ -3365,6 +3362,7 @@ static int velocity_set_coalesce(struct net_device *dev, ecmd->tx_coalesce_usecs); /* Setup the interrupt suppression and queue timers */ + spin_lock_irqsave(&vptr->lock, flags); mac_disable_int(vptr->mac_regs); setup_adaptive_interrupts(vptr); setup_queue_timers(vptr); @@ -3372,6 +3370,7 @@ static int velocity_set_coalesce(struct net_device *dev, mac_write_int_mask(vptr->int_mask, vptr->mac_regs); mac_clear_isr(vptr->mac_regs); mac_enable_int(vptr->mac_regs); + spin_unlock_irqrestore(&vptr->lock, flags); return 0; } diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index fa12b90..29bf336 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -1615,7 +1615,7 @@ static int ath_tx_setup_buffer(struct ieee80211_hw *hw, struct ath_buf *bf, bf->bf_frmlen -= padsize; } - if (conf_is_ht(&hw->conf) && !is_pae(skb)) + if (conf_is_ht(&hw->conf)) bf->bf_state.bf_type |= BUF_HT; bf->bf_flags = setup_tx_flags(sc, skb, txctl->txq); @@ -1701,7 +1701,7 @@ static void ath_tx_start_dma(struct ath_softc *sc, struct ath_buf *bf, goto tx_done; } - if (tx_info->flags & IEEE80211_TX_CTL_AMPDU) { + if ((tx_info->flags & IEEE80211_TX_CTL_AMPDU) && !is_pae(skb)) { /* * Try aggregation if it's a unicast data frame * and the destination is HT capable. diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h index fe3bf94..c484cc2 100644 --- a/drivers/net/wireless/b43/b43.h +++ b/drivers/net/wireless/b43/b43.h @@ -115,6 +115,7 @@ #define B43_MMIO_TSF_2 0x636 /* core rev < 3 only */ #define B43_MMIO_TSF_3 0x638 /* core rev < 3 only */ #define B43_MMIO_RNG 0x65A +#define B43_MMIO_IFSSLOT 0x684 /* Interframe slot time */ #define B43_MMIO_IFSCTL 0x688 /* Interframe space control */ #define B43_MMIO_IFSCTL_USE_EDCF 0x0004 #define B43_MMIO_POWERUP_DELAY 0x6A8 diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 4c41cfe..490fb45d 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -628,10 +628,17 @@ static void b43_upload_card_macaddress(struct b43_wldev *dev) static void b43_set_slot_time(struct b43_wldev *dev, u16 slot_time) { /* slot_time is in usec. */ - if (dev->phy.type != B43_PHYTYPE_G) + /* This test used to exit for all but a G PHY. */ + if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) return; - b43_write16(dev, 0x684, 510 + slot_time); - b43_shm_write16(dev, B43_SHM_SHARED, 0x0010, slot_time); + b43_write16(dev, B43_MMIO_IFSSLOT, 510 + slot_time); + /* Shared memory location 0x0010 is the slot time and should be + * set to slot_time; however, this register is initially 0 and changing + * the value adversely affects the transmit rate for BCM4311 + * devices. Until this behavior is unterstood, delete this step + * + * b43_shm_write16(dev, B43_SHM_SHARED, 0x0010, slot_time); + */ } static void b43_short_slot_timing_enable(struct b43_wldev *dev) diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index 9b4b8b5..3146281 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -2008,7 +2008,7 @@ static void iwl4965_rx_reply_tx(struct iwl_priv *priv, IWL_DEBUG_TX_REPLY(priv, "Retry scheduler reclaim scd_ssn " "%d index %d\n", scd_ssn , index); freed = iwl_tx_queue_reclaim(priv, txq_id, index); - priv->stations[sta_id].tid[tid].tfds_in_queue -= freed; + iwl_free_tfds_in_queue(priv, sta_id, tid, freed); if (priv->mac80211_registered && (iwl_queue_space(&txq->q) > txq->q.low_mark) && diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index de45f30..cffaae7 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -1125,7 +1125,7 @@ static void iwl5000_rx_reply_tx(struct iwl_priv *priv, scd_ssn , index, txq_id, txq->swq_id); freed = iwl_tx_queue_reclaim(priv, txq_id, index); - priv->stations[sta_id].tid[tid].tfds_in_queue -= freed; + iwl_free_tfds_in_queue(priv, sta_id, tid, freed); if (priv->mac80211_registered && (iwl_queue_space(&txq->q) > txq->q.low_mark) && @@ -1153,16 +1153,14 @@ static void iwl5000_rx_reply_tx(struct iwl_priv *priv, tx_resp->failure_frame); freed = iwl_tx_queue_reclaim(priv, txq_id, index); - if (ieee80211_is_data_qos(tx_resp->frame_ctrl)) - priv->stations[sta_id].tid[tid].tfds_in_queue -= freed; + iwl_free_tfds_in_queue(priv, sta_id, tid, freed); if (priv->mac80211_registered && (iwl_queue_space(&txq->q) > txq->q.low_mark)) iwl_wake_queue(priv, txq_id); } - if (ieee80211_is_data_qos(tx_resp->frame_ctrl)) - iwl_txq_check_empty(priv, sta_id, tid, txq_id); + iwl_txq_check_empty(priv, sta_id, tid, txq_id); if (iwl_check_bits(status, TX_ABORT_REQUIRED_MSK)) IWL_ERR(priv, "TODO: Implement Tx ABORT REQUIRED!!!\n"); diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 5461f10..f36f804 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -2745,6 +2745,7 @@ int iwl_mac_config(struct ieee80211_hw *hw, u32 changed) priv->staging_rxon.flags = 0; iwl_set_rxon_channel(priv, conf->channel); + iwl_set_rxon_ht(priv, ht_conf); iwl_set_flags_for_band(priv, conf->channel->band); spin_unlock_irqrestore(&priv->lock, flags); diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index 27ca859..b69e972 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -446,6 +446,8 @@ void iwl_hw_txq_ctx_free(struct iwl_priv *priv); int iwl_hw_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq); int iwl_txq_update_write_ptr(struct iwl_priv *priv, struct iwl_tx_queue *txq); +void iwl_free_tfds_in_queue(struct iwl_priv *priv, + int sta_id, int tid, int freed); int iwl_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq, int slots_num, u32 txq_id); void iwl_tx_queue_free(struct iwl_priv *priv, int txq_id); diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c index 6f36b6e..2dbce85 100644 --- a/drivers/net/wireless/iwlwifi/iwl-rx.c +++ b/drivers/net/wireless/iwlwifi/iwl-rx.c @@ -928,7 +928,10 @@ static void iwl_pass_packet_to_mac80211(struct iwl_priv *priv, if (ieee80211_is_mgmt(fc) || ieee80211_has_protected(fc) || ieee80211_has_morefrags(fc) || - le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG) + le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG || + (ieee80211_is_data_qos(fc) && + *ieee80211_get_qos_ctl(hdr) & + IEEE80211_QOS_CONTROL_A_MSDU_PRESENT)) ret = skb_linearize(skb); else ret = __pskb_pull_tail(skb, min_t(u16, IWL_LINK_HDR_MAX, len)) ? diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index 87ce2bd..8f40715 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -120,6 +120,20 @@ int iwl_txq_update_write_ptr(struct iwl_priv *priv, struct iwl_tx_queue *txq) EXPORT_SYMBOL(iwl_txq_update_write_ptr); +void iwl_free_tfds_in_queue(struct iwl_priv *priv, + int sta_id, int tid, int freed) +{ + if (priv->stations[sta_id].tid[tid].tfds_in_queue >= freed) + priv->stations[sta_id].tid[tid].tfds_in_queue -= freed; + else { + IWL_ERR(priv, "free more than tfds_in_queue (%u:%d)\n", + priv->stations[sta_id].tid[tid].tfds_in_queue, + freed); + priv->stations[sta_id].tid[tid].tfds_in_queue = 0; + } +} +EXPORT_SYMBOL(iwl_free_tfds_in_queue); + /** * iwl_tx_queue_free - Deallocate DMA queue. * @txq: Transmit queue to deallocate. @@ -1131,6 +1145,7 @@ int iwl_tx_queue_reclaim(struct iwl_priv *priv, int txq_id, int index) struct iwl_queue *q = &txq->q; struct iwl_tx_info *tx_info; int nfreed = 0; + struct ieee80211_hdr *hdr; if ((index >= q->n_bd) || (iwl_queue_used(q, index) == 0)) { IWL_ERR(priv, "Read index for DMA queue txq id (%d), index %d, " @@ -1145,13 +1160,16 @@ int iwl_tx_queue_reclaim(struct iwl_priv *priv, int txq_id, int index) tx_info = &txq->txb[txq->q.read_ptr]; iwl_tx_status(priv, tx_info->skb[0]); + + hdr = (struct ieee80211_hdr *)tx_info->skb[0]->data; + if (hdr && ieee80211_is_data_qos(hdr->frame_control)) + nfreed++; tx_info->skb[0] = NULL; if (priv->cfg->ops->lib->txq_inval_byte_cnt_tbl) priv->cfg->ops->lib->txq_inval_byte_cnt_tbl(priv, txq); priv->cfg->ops->lib->txq_free_tfd(priv, txq); - nfreed++; } return nfreed; } @@ -1559,7 +1577,7 @@ void iwl_rx_reply_compressed_ba(struct iwl_priv *priv, if (txq->q.read_ptr != (ba_resp_scd_ssn & 0xff)) { /* calculate mac80211 ampdu sw queue to wake */ int freed = iwl_tx_queue_reclaim(priv, scd_flow, index); - priv->stations[sta_id].tid[tid].tfds_in_queue -= freed; + iwl_free_tfds_in_queue(priv, sta_id, tid, freed); if ((iwl_queue_space(&txq->q) > txq->q.low_mark) && priv->mac80211_registered && diff --git a/drivers/net/wireless/iwmc3200wifi/rx.c b/drivers/net/wireless/iwmc3200wifi/rx.c index 6d6ed74..f727b4a 100644 --- a/drivers/net/wireless/iwmc3200wifi/rx.c +++ b/drivers/net/wireless/iwmc3200wifi/rx.c @@ -794,7 +794,7 @@ static int iwm_mlme_update_bss_table(struct iwm_priv *iwm, u8 *buf, } bss->bss = kzalloc(bss_len, GFP_KERNEL); - if (!bss) { + if (!bss->bss) { kfree(bss); IWM_ERR(iwm, "Couldn't allocate bss\n"); return -ENOMEM; diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c index bc5726d..7ba3052 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_dev.c +++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c @@ -65,6 +65,7 @@ static struct usb_device_id rtl8187_table[] __devinitdata = { /* Sitecom */ {USB_DEVICE(0x0df6, 0x000d), .driver_info = DEVICE_RTL8187}, {USB_DEVICE(0x0df6, 0x0028), .driver_info = DEVICE_RTL8187B}, + {USB_DEVICE(0x0df6, 0x0029), .driver_info = DEVICE_RTL8187B}, /* Sphairon Access Systems GmbH */ {USB_DEVICE(0x114B, 0x0150), .driver_info = DEVICE_RTL8187}, /* Dick Smith Electronics */ diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig index d2fa27c..7cecc8f 100644 --- a/drivers/of/Kconfig +++ b/drivers/of/Kconfig @@ -1,3 +1,11 @@ +config OF_FLATTREE + bool + depends on OF + +config OF_DYNAMIC + def_bool y + depends on OF && PPC_OF + config OF_DEVICE def_bool y depends on OF && (SPARC || PPC_OF || MICROBLAZE) diff --git a/drivers/of/Makefile b/drivers/of/Makefile index bdfb5f5..f232cc9 100644 --- a/drivers/of/Makefile +++ b/drivers/of/Makefile @@ -1,4 +1,5 @@ obj-y = base.o +obj-$(CONFIG_OF_FLATTREE) += fdt.o obj-$(CONFIG_OF_DEVICE) += device.o platform.o obj-$(CONFIG_OF_GPIO) += gpio.o obj-$(CONFIG_OF_I2C) += of_i2c.o diff --git a/drivers/of/base.c b/drivers/of/base.c index e6627b2..cb96888 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -20,8 +20,10 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/spinlock.h> +#include <linux/proc_fs.h> struct device_node *allnodes; +struct device_node *of_chosen; /* use when traversing tree through the allnext, child, sibling, * or parent members of struct device_node. @@ -37,7 +39,7 @@ int of_n_addr_cells(struct device_node *np) np = np->parent; ip = of_get_property(np, "#address-cells", NULL); if (ip) - return *ip; + return be32_to_cpup(ip); } while (np->parent); /* No #address-cells property for the root node */ return OF_ROOT_NODE_ADDR_CELLS_DEFAULT; @@ -53,13 +55,88 @@ int of_n_size_cells(struct device_node *np) np = np->parent; ip = of_get_property(np, "#size-cells", NULL); if (ip) - return *ip; + return be32_to_cpup(ip); } while (np->parent); /* No #size-cells property for the root node */ return OF_ROOT_NODE_SIZE_CELLS_DEFAULT; } EXPORT_SYMBOL(of_n_size_cells); +#if !defined(CONFIG_SPARC) /* SPARC doesn't do ref counting (yet) */ +/** + * of_node_get - Increment refcount of a node + * @node: Node to inc refcount, NULL is supported to + * simplify writing of callers + * + * Returns node. + */ +struct device_node *of_node_get(struct device_node *node) +{ + if (node) + kref_get(&node->kref); + return node; +} +EXPORT_SYMBOL(of_node_get); + +static inline struct device_node *kref_to_device_node(struct kref *kref) +{ + return container_of(kref, struct device_node, kref); +} + +/** + * of_node_release - release a dynamically allocated node + * @kref: kref element of the node to be released + * + * In of_node_put() this function is passed to kref_put() + * as the destructor. + */ +static void of_node_release(struct kref *kref) +{ + struct device_node *node = kref_to_device_node(kref); + struct property *prop = node->properties; + + /* We should never be releasing nodes that haven't been detached. */ + if (!of_node_check_flag(node, OF_DETACHED)) { + pr_err("ERROR: Bad of_node_put() on %s\n", node->full_name); + dump_stack(); + kref_init(&node->kref); + return; + } + + if (!of_node_check_flag(node, OF_DYNAMIC)) + return; + + while (prop) { + struct property *next = prop->next; + kfree(prop->name); + kfree(prop->value); + kfree(prop); + prop = next; + + if (!prop) { + prop = node->deadprops; + node->deadprops = NULL; + } + } + kfree(node->full_name); + kfree(node->data); + kfree(node); +} + +/** + * of_node_put - Decrement refcount of a node + * @node: Node to dec refcount, NULL is supported to + * simplify writing of callers + * + */ +void of_node_put(struct device_node *node) +{ + if (node) + kref_put(&node->kref, of_node_release); +} +EXPORT_SYMBOL(of_node_put); +#endif /* !CONFIG_SPARC */ + struct property *of_find_property(const struct device_node *np, const char *name, int *lenp) @@ -144,6 +221,27 @@ int of_device_is_compatible(const struct device_node *device, EXPORT_SYMBOL(of_device_is_compatible); /** + * of_machine_is_compatible - Test root of device tree for a given compatible value + * @compat: compatible string to look for in root node's compatible property. + * + * Returns true if the root node has the given value in its + * compatible property. + */ +int of_machine_is_compatible(const char *compat) +{ + struct device_node *root; + int rc = 0; + + root = of_find_node_by_path("/"); + if (root) { + rc = of_device_is_compatible(root, compat); + of_node_put(root); + } + return rc; +} +EXPORT_SYMBOL(of_machine_is_compatible); + +/** * of_device_is_available - check if a device is available for use * * @device: Node to check for availability @@ -519,6 +617,27 @@ int of_modalias_node(struct device_node *node, char *modalias, int len) EXPORT_SYMBOL_GPL(of_modalias_node); /** + * of_find_node_by_phandle - Find a node given a phandle + * @handle: phandle of the node to find + * + * Returns a node pointer with refcount incremented, use + * of_node_put() on it when done. + */ +struct device_node *of_find_node_by_phandle(phandle handle) +{ + struct device_node *np; + + read_lock(&devtree_lock); + for (np = allnodes; np; np = np->allnext) + if (np->phandle == handle) + break; + of_node_get(np); + read_unlock(&devtree_lock); + return np; +} +EXPORT_SYMBOL(of_find_node_by_phandle); + +/** * of_parse_phandle - Resolve a phandle property to a device_node pointer * @np: Pointer to device node holding phandle property * @phandle_name: Name of property holding a phandle value @@ -578,8 +697,8 @@ int of_parse_phandles_with_args(struct device_node *np, const char *list_name, const void **out_args) { int ret = -EINVAL; - const u32 *list; - const u32 *list_end; + const __be32 *list; + const __be32 *list_end; int size; int cur_index = 0; struct device_node *node = NULL; @@ -593,7 +712,7 @@ int of_parse_phandles_with_args(struct device_node *np, const char *list_name, list_end = list + size / sizeof(*list); while (list < list_end) { - const u32 *cells; + const __be32 *cells; const phandle *phandle; phandle = list++; @@ -617,7 +736,7 @@ int of_parse_phandles_with_args(struct device_node *np, const char *list_name, goto err1; } - list += *cells; + list += be32_to_cpup(cells); if (list > list_end) { pr_debug("%s: insufficient arguments length\n", np->full_name); @@ -658,3 +777,190 @@ err0: return ret; } EXPORT_SYMBOL(of_parse_phandles_with_args); + +/** + * prom_add_property - Add a property to a node + */ +int prom_add_property(struct device_node *np, struct property *prop) +{ + struct property **next; + unsigned long flags; + + prop->next = NULL; + write_lock_irqsave(&devtree_lock, flags); + next = &np->properties; + while (*next) { + if (strcmp(prop->name, (*next)->name) == 0) { + /* duplicate ! don't insert it */ + write_unlock_irqrestore(&devtree_lock, flags); + return -1; + } + next = &(*next)->next; + } + *next = prop; + write_unlock_irqrestore(&devtree_lock, flags); + +#ifdef CONFIG_PROC_DEVICETREE + /* try to add to proc as well if it was initialized */ + if (np->pde) + proc_device_tree_add_prop(np->pde, prop); +#endif /* CONFIG_PROC_DEVICETREE */ + + return 0; +} + +/** + * prom_remove_property - Remove a property from a node. + * + * Note that we don't actually remove it, since we have given out + * who-knows-how-many pointers to the data using get-property. + * Instead we just move the property to the "dead properties" + * list, so it won't be found any more. + */ +int prom_remove_property(struct device_node *np, struct property *prop) +{ + struct property **next; + unsigned long flags; + int found = 0; + + write_lock_irqsave(&devtree_lock, flags); + next = &np->properties; + while (*next) { + if (*next == prop) { + /* found the node */ + *next = prop->next; + prop->next = np->deadprops; + np->deadprops = prop; + found = 1; + break; + } + next = &(*next)->next; + } + write_unlock_irqrestore(&devtree_lock, flags); + + if (!found) + return -ENODEV; + +#ifdef CONFIG_PROC_DEVICETREE + /* try to remove the proc node as well */ + if (np->pde) + proc_device_tree_remove_prop(np->pde, prop); +#endif /* CONFIG_PROC_DEVICETREE */ + + return 0; +} + +/* + * prom_update_property - Update a property in a node. + * + * Note that we don't actually remove it, since we have given out + * who-knows-how-many pointers to the data using get-property. + * Instead we just move the property to the "dead properties" list, + * and add the new property to the property list + */ +int prom_update_property(struct device_node *np, + struct property *newprop, + struct property *oldprop) +{ + struct property **next; + unsigned long flags; + int found = 0; + + write_lock_irqsave(&devtree_lock, flags); + next = &np->properties; + while (*next) { + if (*next == oldprop) { + /* found the node */ + newprop->next = oldprop->next; + *next = newprop; + oldprop->next = np->deadprops; + np->deadprops = oldprop; + found = 1; + break; + } + next = &(*next)->next; + } + write_unlock_irqrestore(&devtree_lock, flags); + + if (!found) + return -ENODEV; + +#ifdef CONFIG_PROC_DEVICETREE + /* try to add to proc as well if it was initialized */ + if (np->pde) + proc_device_tree_update_prop(np->pde, newprop, oldprop); +#endif /* CONFIG_PROC_DEVICETREE */ + + return 0; +} + +#if defined(CONFIG_OF_DYNAMIC) +/* + * Support for dynamic device trees. + * + * On some platforms, the device tree can be manipulated at runtime. + * The routines in this section support adding, removing and changing + * device tree nodes. + */ + +/** + * of_attach_node - Plug a device node into the tree and global list. + */ +void of_attach_node(struct device_node *np) +{ + unsigned long flags; + + write_lock_irqsave(&devtree_lock, flags); + np->sibling = np->parent->child; + np->allnext = allnodes; + np->parent->child = np; + allnodes = np; + write_unlock_irqrestore(&devtree_lock, flags); +} + +/** + * of_detach_node - "Unplug" a node from the device tree. + * + * The caller must hold a reference to the node. The memory associated with + * the node is not freed until its refcount goes to zero. + */ +void of_detach_node(struct device_node *np) +{ + struct device_node *parent; + unsigned long flags; + + write_lock_irqsave(&devtree_lock, flags); + + parent = np->parent; + if (!parent) + goto out_unlock; + + if (allnodes == np) + allnodes = np->allnext; + else { + struct device_node *prev; + for (prev = allnodes; + prev->allnext != np; + prev = prev->allnext) + ; + prev->allnext = np->allnext; + } + + if (parent->child == np) + parent->child = np->sibling; + else { + struct device_node *prevsib; + for (prevsib = np->parent->child; + prevsib->sibling != np; + prevsib = prevsib->sibling) + ; + prevsib->sibling = np->sibling; + } + + of_node_set_flag(np, OF_DETACHED); + +out_unlock: + write_unlock_irqrestore(&devtree_lock, flags); +} +#endif /* defined(CONFIG_OF_DYNAMIC) */ + diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c new file mode 100644 index 0000000..406757a --- /dev/null +++ b/drivers/of/fdt.c @@ -0,0 +1,590 @@ +/* + * Functions for working with the Flattened Device Tree data format + * + * Copyright 2009 Benjamin Herrenschmidt, IBM Corp + * benh@kernel.crashing.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/initrd.h> +#include <linux/of.h> +#include <linux/of_fdt.h> +#include <linux/string.h> +#include <linux/errno.h> + +#ifdef CONFIG_PPC +#include <asm/machdep.h> +#endif /* CONFIG_PPC */ + +#include <asm/page.h> + +int __initdata dt_root_addr_cells; +int __initdata dt_root_size_cells; + +struct boot_param_header *initial_boot_params; + +char *find_flat_dt_string(u32 offset) +{ + return ((char *)initial_boot_params) + + be32_to_cpu(initial_boot_params->off_dt_strings) + offset; +} + +/** + * of_scan_flat_dt - scan flattened tree blob and call callback on each. + * @it: callback function + * @data: context data pointer + * + * This function is used to scan the flattened device-tree, it is + * used to extract the memory information at boot before we can + * unflatten the tree + */ +int __init of_scan_flat_dt(int (*it)(unsigned long node, + const char *uname, int depth, + void *data), + void *data) +{ + unsigned long p = ((unsigned long)initial_boot_params) + + be32_to_cpu(initial_boot_params->off_dt_struct); + int rc = 0; + int depth = -1; + + do { + u32 tag = be32_to_cpup((__be32 *)p); + char *pathp; + + p += 4; + if (tag == OF_DT_END_NODE) { + depth--; + continue; + } + if (tag == OF_DT_NOP) + continue; + if (tag == OF_DT_END) + break; + if (tag == OF_DT_PROP) { + u32 sz = be32_to_cpup((__be32 *)p); + p += 8; + if (be32_to_cpu(initial_boot_params->version) < 0x10) + p = _ALIGN(p, sz >= 8 ? 8 : 4); + p += sz; + p = _ALIGN(p, 4); + continue; + } + if (tag != OF_DT_BEGIN_NODE) { + pr_err("Invalid tag %x in flat device tree!\n", tag); + return -EINVAL; + } + depth++; + pathp = (char *)p; + p = _ALIGN(p + strlen(pathp) + 1, 4); + if ((*pathp) == '/') { + char *lp, *np; + for (lp = NULL, np = pathp; *np; np++) + if ((*np) == '/') + lp = np+1; + if (lp != NULL) + pathp = lp; + } + rc = it(p, pathp, depth, data); + if (rc != 0) + break; + } while (1); + + return rc; +} + +/** + * of_get_flat_dt_root - find the root node in the flat blob + */ +unsigned long __init of_get_flat_dt_root(void) +{ + unsigned long p = ((unsigned long)initial_boot_params) + + be32_to_cpu(initial_boot_params->off_dt_struct); + + while (be32_to_cpup((__be32 *)p) == OF_DT_NOP) + p += 4; + BUG_ON(be32_to_cpup((__be32 *)p) != OF_DT_BEGIN_NODE); + p += 4; + return _ALIGN(p + strlen((char *)p) + 1, 4); +} + +/** + * of_get_flat_dt_prop - Given a node in the flat blob, return the property ptr + * + * This function can be used within scan_flattened_dt callback to get + * access to properties + */ +void *__init of_get_flat_dt_prop(unsigned long node, const char *name, + unsigned long *size) +{ + unsigned long p = node; + + do { + u32 tag = be32_to_cpup((__be32 *)p); + u32 sz, noff; + const char *nstr; + + p += 4; + if (tag == OF_DT_NOP) + continue; + if (tag != OF_DT_PROP) + return NULL; + + sz = be32_to_cpup((__be32 *)p); + noff = be32_to_cpup((__be32 *)(p + 4)); + p += 8; + if (be32_to_cpu(initial_boot_params->version) < 0x10) + p = _ALIGN(p, sz >= 8 ? 8 : 4); + + nstr = find_flat_dt_string(noff); + if (nstr == NULL) { + pr_warning("Can't find property index name !\n"); + return NULL; + } + if (strcmp(name, nstr) == 0) { + if (size) + *size = sz; + return (void *)p; + } + p += sz; + p = _ALIGN(p, 4); + } while (1); +} + +/** + * of_flat_dt_is_compatible - Return true if given node has compat in compatible list + * @node: node to test + * @compat: compatible string to compare with compatible list. + */ +int __init of_flat_dt_is_compatible(unsigned long node, const char *compat) +{ + const char *cp; + unsigned long cplen, l; + + cp = of_get_flat_dt_prop(node, "compatible", &cplen); + if (cp == NULL) + return 0; + while (cplen > 0) { + if (strncasecmp(cp, compat, strlen(compat)) == 0) + return 1; + l = strlen(cp) + 1; + cp += l; + cplen -= l; + } + + return 0; +} + +static void *__init unflatten_dt_alloc(unsigned long *mem, unsigned long size, + unsigned long align) +{ + void *res; + + *mem = _ALIGN(*mem, align); + res = (void *)*mem; + *mem += size; + + return res; +} + +/** + * unflatten_dt_node - Alloc and populate a device_node from the flat tree + * @p: pointer to node in flat tree + * @dad: Parent struct device_node + * @allnextpp: pointer to ->allnext from last allocated device_node + * @fpsize: Size of the node path up at the current depth. + */ +unsigned long __init unflatten_dt_node(unsigned long mem, + unsigned long *p, + struct device_node *dad, + struct device_node ***allnextpp, + unsigned long fpsize) +{ + struct device_node *np; + struct property *pp, **prev_pp = NULL; + char *pathp; + u32 tag; + unsigned int l, allocl; + int has_name = 0; + int new_format = 0; + + tag = be32_to_cpup((__be32 *)(*p)); + if (tag != OF_DT_BEGIN_NODE) { + pr_err("Weird tag at start of node: %x\n", tag); + return mem; + } + *p += 4; + pathp = (char *)*p; + l = allocl = strlen(pathp) + 1; + *p = _ALIGN(*p + l, 4); + + /* version 0x10 has a more compact unit name here instead of the full + * path. we accumulate the full path size using "fpsize", we'll rebuild + * it later. We detect this because the first character of the name is + * not '/'. + */ + if ((*pathp) != '/') { + new_format = 1; + if (fpsize == 0) { + /* root node: special case. fpsize accounts for path + * plus terminating zero. root node only has '/', so + * fpsize should be 2, but we want to avoid the first + * level nodes to have two '/' so we use fpsize 1 here + */ + fpsize = 1; + allocl = 2; + } else { + /* account for '/' and path size minus terminal 0 + * already in 'l' + */ + fpsize += l; + allocl = fpsize; + } + } + + np = unflatten_dt_alloc(&mem, sizeof(struct device_node) + allocl, + __alignof__(struct device_node)); + if (allnextpp) { + memset(np, 0, sizeof(*np)); + np->full_name = ((char *)np) + sizeof(struct device_node); + if (new_format) { + char *fn = np->full_name; + /* rebuild full path for new format */ + if (dad && dad->parent) { + strcpy(fn, dad->full_name); +#ifdef DEBUG + if ((strlen(fn) + l + 1) != allocl) { + pr_debug("%s: p: %d, l: %d, a: %d\n", + pathp, (int)strlen(fn), + l, allocl); + } +#endif + fn += strlen(fn); + } + *(fn++) = '/'; + memcpy(fn, pathp, l); + } else + memcpy(np->full_name, pathp, l); + prev_pp = &np->properties; + **allnextpp = np; + *allnextpp = &np->allnext; + if (dad != NULL) { + np->parent = dad; + /* we temporarily use the next field as `last_child'*/ + if (dad->next == NULL) + dad->child = np; + else + dad->next->sibling = np; + dad->next = np; + } + kref_init(&np->kref); + } + while (1) { + u32 sz, noff; + char *pname; + + tag = be32_to_cpup((__be32 *)(*p)); + if (tag == OF_DT_NOP) { + *p += 4; + continue; + } + if (tag != OF_DT_PROP) + break; + *p += 4; + sz = be32_to_cpup((__be32 *)(*p)); + noff = be32_to_cpup((__be32 *)((*p) + 4)); + *p += 8; + if (be32_to_cpu(initial_boot_params->version) < 0x10) + *p = _ALIGN(*p, sz >= 8 ? 8 : 4); + + pname = find_flat_dt_string(noff); + if (pname == NULL) { + pr_info("Can't find property name in list !\n"); + break; + } + if (strcmp(pname, "name") == 0) + has_name = 1; + l = strlen(pname) + 1; + pp = unflatten_dt_alloc(&mem, sizeof(struct property), + __alignof__(struct property)); + if (allnextpp) { + /* We accept flattened tree phandles either in + * ePAPR-style "phandle" properties, or the + * legacy "linux,phandle" properties. If both + * appear and have different values, things + * will get weird. Don't do that. */ + if ((strcmp(pname, "phandle") == 0) || + (strcmp(pname, "linux,phandle") == 0)) { + if (np->phandle == 0) + np->phandle = *((u32 *)*p); + } + /* And we process the "ibm,phandle" property + * used in pSeries dynamic device tree + * stuff */ + if (strcmp(pname, "ibm,phandle") == 0) + np->phandle = *((u32 *)*p); + pp->name = pname; + pp->length = sz; + pp->value = (void *)*p; + *prev_pp = pp; + prev_pp = &pp->next; + } + *p = _ALIGN((*p) + sz, 4); + } + /* with version 0x10 we may not have the name property, recreate + * it here from the unit name if absent + */ + if (!has_name) { + char *p1 = pathp, *ps = pathp, *pa = NULL; + int sz; + + while (*p1) { + if ((*p1) == '@') + pa = p1; + if ((*p1) == '/') + ps = p1 + 1; + p1++; + } + if (pa < ps) + pa = p1; + sz = (pa - ps) + 1; + pp = unflatten_dt_alloc(&mem, sizeof(struct property) + sz, + __alignof__(struct property)); + if (allnextpp) { + pp->name = "name"; + pp->length = sz; + pp->value = pp + 1; + *prev_pp = pp; + prev_pp = &pp->next; + memcpy(pp->value, ps, sz - 1); + ((char *)pp->value)[sz - 1] = 0; + pr_debug("fixed up name for %s -> %s\n", pathp, + (char *)pp->value); + } + } + if (allnextpp) { + *prev_pp = NULL; + np->name = of_get_property(np, "name", NULL); + np->type = of_get_property(np, "device_type", NULL); + + if (!np->name) + np->name = "<NULL>"; + if (!np->type) + np->type = "<NULL>"; + } + while (tag == OF_DT_BEGIN_NODE) { + mem = unflatten_dt_node(mem, p, np, allnextpp, fpsize); + tag = be32_to_cpup((__be32 *)(*p)); + } + if (tag != OF_DT_END_NODE) { + pr_err("Weird tag at end of node: %x\n", tag); + return mem; + } + *p += 4; + return mem; +} + +#ifdef CONFIG_BLK_DEV_INITRD +/** + * early_init_dt_check_for_initrd - Decode initrd location from flat tree + * @node: reference to node containing initrd location ('chosen') + */ +void __init early_init_dt_check_for_initrd(unsigned long node) +{ + unsigned long start, end, len; + __be32 *prop; + + pr_debug("Looking for initrd properties... "); + + prop = of_get_flat_dt_prop(node, "linux,initrd-start", &len); + if (!prop) + return; + start = of_read_ulong(prop, len/4); + + prop = of_get_flat_dt_prop(node, "linux,initrd-end", &len); + if (!prop) + return; + end = of_read_ulong(prop, len/4); + + early_init_dt_setup_initrd_arch(start, end); + pr_debug("initrd_start=0x%lx initrd_end=0x%lx\n", start, end); +} +#else +inline void early_init_dt_check_for_initrd(unsigned long node) +{ +} +#endif /* CONFIG_BLK_DEV_INITRD */ + +/** + * early_init_dt_scan_root - fetch the top level address and size cells + */ +int __init early_init_dt_scan_root(unsigned long node, const char *uname, + int depth, void *data) +{ + __be32 *prop; + + if (depth != 0) + return 0; + + dt_root_size_cells = OF_ROOT_NODE_SIZE_CELLS_DEFAULT; + dt_root_addr_cells = OF_ROOT_NODE_ADDR_CELLS_DEFAULT; + + prop = of_get_flat_dt_prop(node, "#size-cells", NULL); + if (prop) + dt_root_size_cells = be32_to_cpup(prop); + pr_debug("dt_root_size_cells = %x\n", dt_root_size_cells); + + prop = of_get_flat_dt_prop(node, "#address-cells", NULL); + if (prop) + dt_root_addr_cells = be32_to_cpup(prop); + pr_debug("dt_root_addr_cells = %x\n", dt_root_addr_cells); + + /* break now */ + return 1; +} + +u64 __init dt_mem_next_cell(int s, __be32 **cellp) +{ + __be32 *p = *cellp; + + *cellp = p + s; + return of_read_number(p, s); +} + +/** + * early_init_dt_scan_memory - Look for an parse memory nodes + */ +int __init early_init_dt_scan_memory(unsigned long node, const char *uname, + int depth, void *data) +{ + char *type = of_get_flat_dt_prop(node, "device_type", NULL); + __be32 *reg, *endp; + unsigned long l; + + /* We are scanning "memory" nodes only */ + if (type == NULL) { + /* + * The longtrail doesn't have a device_type on the + * /memory node, so look for the node called /memory@0. + */ + if (depth != 1 || strcmp(uname, "memory@0") != 0) + return 0; + } else if (strcmp(type, "memory") != 0) + return 0; + + reg = of_get_flat_dt_prop(node, "linux,usable-memory", &l); + if (reg == NULL) + reg = of_get_flat_dt_prop(node, "reg", &l); + if (reg == NULL) + return 0; + + endp = reg + (l / sizeof(__be32)); + + pr_debug("memory scan node %s, reg size %ld, data: %x %x %x %x,\n", + uname, l, reg[0], reg[1], reg[2], reg[3]); + + while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) { + u64 base, size; + + base = dt_mem_next_cell(dt_root_addr_cells, ®); + size = dt_mem_next_cell(dt_root_size_cells, ®); + + if (size == 0) + continue; + pr_debug(" - %llx , %llx\n", (unsigned long long)base, + (unsigned long long)size); + + early_init_dt_add_memory_arch(base, size); + } + + return 0; +} + +int __init early_init_dt_scan_chosen(unsigned long node, const char *uname, + int depth, void *data) +{ + unsigned long l; + char *p; + + pr_debug("search \"chosen\", depth: %d, uname: %s\n", depth, uname); + + if (depth != 1 || + (strcmp(uname, "chosen") != 0 && strcmp(uname, "chosen@0") != 0)) + return 0; + + early_init_dt_check_for_initrd(node); + + /* Retreive command line */ + p = of_get_flat_dt_prop(node, "bootargs", &l); + if (p != NULL && l > 0) + strlcpy(cmd_line, p, min((int)l, COMMAND_LINE_SIZE)); + +#ifdef CONFIG_CMDLINE +#ifndef CONFIG_CMDLINE_FORCE + if (p == NULL || l == 0 || (l == 1 && (*p) == 0)) +#endif + strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE); +#endif /* CONFIG_CMDLINE */ + + early_init_dt_scan_chosen_arch(node); + + pr_debug("Command line is: %s\n", cmd_line); + + /* break now */ + return 1; +} + +/** + * unflatten_device_tree - create tree of device_nodes from flat blob + * + * unflattens the device-tree passed by the firmware, creating the + * tree of struct device_node. It also fills the "name" and "type" + * pointers of the nodes so the normal device-tree walking functions + * can be used. + */ +void __init unflatten_device_tree(void) +{ + unsigned long start, mem, size; + struct device_node **allnextp = &allnodes; + + pr_debug(" -> unflatten_device_tree()\n"); + + /* First pass, scan for size */ + start = ((unsigned long)initial_boot_params) + + be32_to_cpu(initial_boot_params->off_dt_struct); + size = unflatten_dt_node(0, &start, NULL, NULL, 0); + size = (size | 3) + 1; + + pr_debug(" size is %lx, allocating...\n", size); + + /* Allocate memory for the expanded device tree */ + mem = early_init_dt_alloc_memory_arch(size + 4, + __alignof__(struct device_node)); + mem = (unsigned long) __va(mem); + + ((__be32 *)mem)[size / 4] = cpu_to_be32(0xdeadbeef); + + pr_debug(" unflattening %lx...\n", mem); + + /* Second pass, do actual unflattening */ + start = ((unsigned long)initial_boot_params) + + be32_to_cpu(initial_boot_params->off_dt_struct); + unflatten_dt_node(mem, &start, NULL, &allnextp, 0); + if (be32_to_cpup((__be32 *)start) != OF_DT_END) + pr_warning("Weird tag at end of tree: %08x\n", *((u32 *)start)); + if (be32_to_cpu(((__be32 *)mem)[size / 4]) != 0xdeadbeef) + pr_warning("End of tree marker overwritten: %08x\n", + be32_to_cpu(((__be32 *)mem)[size / 4])); + *allnextp = NULL; + + /* Get pointer to OF "/chosen" node for use everywhere */ + of_chosen = of_find_node_by_path("/chosen"); + if (of_chosen == NULL) + of_chosen = of_find_node_by_path("/chosen@0"); + + pr_debug(" <- unflatten_device_tree()\n"); +} diff --git a/drivers/of/gpio.c b/drivers/of/gpio.c index 6eea601..24c3606 100644 --- a/drivers/of/gpio.c +++ b/drivers/of/gpio.c @@ -36,7 +36,7 @@ int of_get_gpio_flags(struct device_node *np, int index, struct of_gpio_chip *of_gc = NULL; int size; const void *gpio_spec; - const u32 *gpio_cells; + const __be32 *gpio_cells; ret = of_parse_phandles_with_args(np, "gpios", "#gpio-cells", index, &gc, &gpio_spec); @@ -55,7 +55,7 @@ int of_get_gpio_flags(struct device_node *np, int index, gpio_cells = of_get_property(gc, "#gpio-cells", &size); if (!gpio_cells || size != sizeof(*gpio_cells) || - *gpio_cells != of_gc->gpio_cells) { + be32_to_cpup(gpio_cells) != of_gc->gpio_cells) { pr_debug("%s: wrong #gpio-cells for %s\n", np->full_name, gc->full_name); ret = -EINVAL; @@ -127,7 +127,8 @@ EXPORT_SYMBOL(of_gpio_count); int of_gpio_simple_xlate(struct of_gpio_chip *of_gc, struct device_node *np, const void *gpio_spec, enum of_gpio_flags *flags) { - const u32 *gpio = gpio_spec; + const __be32 *gpio = gpio_spec; + const u32 n = be32_to_cpup(gpio); /* * We're discouraging gpio_cells < 2, since that way you'll have to @@ -140,13 +141,13 @@ int of_gpio_simple_xlate(struct of_gpio_chip *of_gc, struct device_node *np, return -EINVAL; } - if (*gpio > of_gc->gc.ngpio) + if (n > of_gc->gc.ngpio) return -EINVAL; if (flags) - *flags = gpio[1]; + *flags = be32_to_cpu(gpio[1]); - return *gpio; + return n; } EXPORT_SYMBOL(of_gpio_simple_xlate); diff --git a/drivers/of/of_i2c.c b/drivers/of/of_i2c.c index fa65a2b..a3a708e 100644 --- a/drivers/of/of_i2c.c +++ b/drivers/of/of_i2c.c @@ -25,7 +25,7 @@ void of_register_i2c_devices(struct i2c_adapter *adap, for_each_child_of_node(adap_node, node) { struct i2c_board_info info = {}; struct dev_archdata dev_ad = {}; - const u32 *addr; + const __be32 *addr; int len; if (of_modalias_node(node, info.type, sizeof(info.type)) < 0) @@ -40,7 +40,7 @@ void of_register_i2c_devices(struct i2c_adapter *adap, info.irq = irq_of_parse_and_map(node, 0); - info.addr = *addr; + info.addr = be32_to_cpup(addr); dev_archdata_set_node(&dev_ad, node); info.archdata = &dev_ad; diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c index 4b22ba5..18ecae4 100644 --- a/drivers/of/of_mdio.c +++ b/drivers/of/of_mdio.c @@ -51,7 +51,7 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np) /* Loop over the child nodes and register a phy_device for each one */ for_each_child_of_node(np, child) { - const u32 *addr; + const __be32 *addr; int len; /* A PHY must have a reg property in the range [0-31] */ @@ -68,7 +68,7 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np) mdio->irq[*addr] = PHY_POLL; } - phy = get_phy_device(mdio, *addr); + phy = get_phy_device(mdio, be32_to_cpup(addr)); if (!phy) { dev_err(&mdio->dev, "error probing PHY at address %i\n", *addr); @@ -160,7 +160,7 @@ struct phy_device *of_phy_connect_fixed_link(struct net_device *dev, struct device_node *net_np; char bus_id[MII_BUS_ID_SIZE + 3]; struct phy_device *phy; - const u32 *phy_id; + const __be32 *phy_id; int sz; if (!dev->dev.parent) @@ -174,7 +174,7 @@ struct phy_device *of_phy_connect_fixed_link(struct net_device *dev, if (!phy_id || sz < sizeof(*phy_id)) return NULL; - sprintf(bus_id, PHY_ID_FMT, "0", phy_id[0]); + sprintf(bus_id, PHY_ID_FMT, "0", be32_to_cpu(phy_id[0])); phy = phy_connect(dev, bus_id, hndlr, 0, iface); return IS_ERR(phy) ? NULL : phy; diff --git a/drivers/of/of_spi.c b/drivers/of/of_spi.c index bed0ed6..f65f48b 100644 --- a/drivers/of/of_spi.c +++ b/drivers/of/of_spi.c @@ -23,7 +23,7 @@ void of_register_spi_devices(struct spi_master *master, struct device_node *np) { struct spi_device *spi; struct device_node *nc; - const u32 *prop; + const __be32 *prop; int rc; int len; @@ -54,7 +54,7 @@ void of_register_spi_devices(struct spi_master *master, struct device_node *np) spi_dev_put(spi); continue; } - spi->chip_select = *prop; + spi->chip_select = be32_to_cpup(prop); /* Mode (clock phase/polarity/etc.) */ if (of_find_property(nc, "spi-cpha", NULL)) @@ -72,7 +72,7 @@ void of_register_spi_devices(struct spi_master *master, struct device_node *np) spi_dev_put(spi); continue; } - spi->max_speed_hz = *prop; + spi->max_speed_hz = be32_to_cpup(prop); /* IRQ */ spi->irq = irq_of_parse_and_map(nc, 0); diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index 8e952fd..cb2fd01 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -720,12 +720,6 @@ static int acpiphp_bus_add(struct acpiphp_func *func) -ret_val); goto acpiphp_bus_add_out; } - /* - * try to start anyway. We could have failed to add - * simply because this bus had previously been added - * on another add. Don't bother with the return value - * we just keep going. - */ ret_val = acpi_bus_start(device); acpiphp_bus_add_out: diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c index 07d14df..226b3e9 100644 --- a/drivers/platform/x86/acer-wmi.c +++ b/drivers/platform/x86/acer-wmi.c @@ -934,7 +934,7 @@ static int __devinit acer_backlight_init(struct device *dev) acer_backlight_device = bd; bd->props.power = FB_BLANK_UNBLANK; - bd->props.brightness = max_brightness; + bd->props.brightness = read_brightness(bd); bd->props.max_brightness = max_brightness; backlight_update_status(bd); return 0; diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index e67e4fe..eb603f1 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -5771,7 +5771,7 @@ static void thermal_exit(void) case TPACPI_THERMAL_ACPI_TMP07: case TPACPI_THERMAL_ACPI_UPDT: sysfs_remove_group(&tpacpi_sensors_pdev->dev.kobj, - &thermal_temp_input16_group); + &thermal_temp_input8_group); break; case TPACPI_THERMAL_NONE: default: diff --git a/drivers/sbus/char/openprom.c b/drivers/sbus/char/openprom.c index 75ac19b..fc2f676 100644 --- a/drivers/sbus/char/openprom.c +++ b/drivers/sbus/char/openprom.c @@ -233,7 +233,7 @@ static int opromnext(void __user *argp, unsigned int cmd, struct device_node *dp ph = 0; if (dp) - ph = dp->node; + ph = dp->phandle; data->current_node = dp; *((int *) op->oprom_array) = ph; @@ -256,7 +256,7 @@ static int oprompci2node(void __user *argp, struct device_node *dp, struct openp dp = pci_device_to_OF_node(pdev); data->current_node = dp; - *((int *)op->oprom_array) = dp->node; + *((int *)op->oprom_array) = dp->phandle; op->oprom_size = sizeof(int); err = copyout(argp, op, bufsize + sizeof(int)); @@ -273,7 +273,7 @@ static int oprompath2node(void __user *argp, struct device_node *dp, struct open dp = of_find_node_by_path(op->oprom_array); if (dp) - ph = dp->node; + ph = dp->phandle; data->current_node = dp; *((int *)op->oprom_array) = ph; op->oprom_size = sizeof(int); @@ -540,7 +540,7 @@ static int opiocgetnext(unsigned int cmd, void __user *argp) } } if (dp) - nd = dp->node; + nd = dp->phandle; if (copy_to_user(argp, &nd, sizeof(phandle))) return -EFAULT; @@ -570,7 +570,7 @@ static int openprom_bsd_ioctl(struct inode * inode, struct file * file, case OPIOCGETOPTNODE: BUILD_BUG_ON(sizeof(phandle) != sizeof(int)); - if (copy_to_user(argp, &options_node->node, sizeof(phandle))) + if (copy_to_user(argp, &options_node->phandle, sizeof(phandle))) return -EFAULT; return 0; diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c index 4775426..9e71ac6 100644 --- a/drivers/scsi/arm/fas216.c +++ b/drivers/scsi/arm/fas216.c @@ -2516,7 +2516,7 @@ int fas216_eh_device_reset(struct scsi_cmnd *SCpnt) if (info->scsi.phase == PHASE_IDLE) fas216_kick(info); - mod_timer(&info->eh_timer, 30 * HZ); + mod_timer(&info->eh_timer, jiffies + 30 * HZ); spin_unlock_irqrestore(&info->host_lock, flags); /* diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index 10be9f3..2f47ae7 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -2009,6 +2009,8 @@ static int fcoe_destroy(const char *buffer, struct kernel_param *kp) fcoe_interface_cleanup(fcoe); rtnl_unlock(); fcoe_if_destroy(fcoe->ctlr.lp); + module_put(THIS_MODULE); + out_putdev: dev_put(netdev); out_nodev: @@ -2059,6 +2061,11 @@ static int fcoe_create(const char *buffer, struct kernel_param *kp) } #endif + if (!try_module_get(THIS_MODULE)) { + rc = -EINVAL; + goto out_nomod; + } + rtnl_lock(); netdev = fcoe_if_to_netdev(buffer); if (!netdev) { @@ -2099,17 +2106,24 @@ static int fcoe_create(const char *buffer, struct kernel_param *kp) if (!fcoe_link_ok(lport)) fcoe_ctlr_link_up(&fcoe->ctlr); - rc = 0; -out_free: /* * Release from init in fcoe_interface_create(), on success lport * should be holding a reference taken in fcoe_if_create(). */ fcoe_interface_put(fcoe); + dev_put(netdev); + rtnl_unlock(); + mutex_unlock(&fcoe_config_mutex); + + return 0; +out_free: + fcoe_interface_put(fcoe); out_putdev: dev_put(netdev); out_nodev: rtnl_unlock(); + module_put(THIS_MODULE); +out_nomod: mutex_unlock(&fcoe_config_mutex); return rc; } diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c index 9823291..511cb6b 100644 --- a/drivers/scsi/fcoe/libfcoe.c +++ b/drivers/scsi/fcoe/libfcoe.c @@ -1187,7 +1187,7 @@ static void fcoe_ctlr_timeout(unsigned long arg) next_timer = fip->ctlr_ka_time; if (time_after_eq(jiffies, fip->port_ka_time)) { - fip->port_ka_time += jiffies + + fip->port_ka_time = jiffies + msecs_to_jiffies(FIP_VN_KA_PERIOD); fip->send_port_ka = 1; } diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index 19d711c..7f43647 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -1890,7 +1890,7 @@ static struct fc_seq *fc_exch_seq_send(struct fc_lport *lport, fc_exch_setup_hdr(ep, fp, ep->f_ctl); sp->cnt++; - if (ep->xid <= lport->lro_xid) + if (ep->xid <= lport->lro_xid && fh->fh_r_ctl == FC_RCTL_DD_UNSOL_CMD) fc_fcp_ddp_setup(fr_fsp(fp), ep->xid); if (unlikely(lport->tt.frame_send(lport, fp))) diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index 881d5df..6fde2fa 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -298,9 +298,6 @@ void fc_fcp_ddp_setup(struct fc_fcp_pkt *fsp, u16 xid) { struct fc_lport *lport; - if (!fsp) - return; - lport = fsp->lp; if ((fsp->req_flags & FC_SRB_READ) && (lport->lro_enabled) && (lport->tt.ddp_setup)) { diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index 0b16502..7ec8ce7 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -1800,7 +1800,8 @@ int fc_lport_bsg_request(struct fc_bsg_job *job) u32 did; job->reply->reply_payload_rcv_len = 0; - rsp->resid_len = job->reply_payload.payload_len; + if (rsp) + rsp->resid_len = job->reply_payload.payload_len; mutex_lock(&lport->lp_mutex); diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c index 0230052..97923bb 100644 --- a/drivers/scsi/libfc/fc_rport.c +++ b/drivers/scsi/libfc/fc_rport.c @@ -623,7 +623,7 @@ static void fc_rport_plogi_resp(struct fc_seq *sp, struct fc_frame *fp, tov = ntohl(plp->fl_csp.sp_e_d_tov); if (ntohs(plp->fl_csp.sp_features) & FC_SP_FT_EDTR) - tov /= 1000; + tov /= 1000000; if (tov > rdata->e_d_tov) rdata->e_d_tov = tov; csp_seq = ntohs(plp->fl_csp.sp_tot_seq); diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c index db6856c..4ad87fd 100644 --- a/drivers/scsi/libiscsi_tcp.c +++ b/drivers/scsi/libiscsi_tcp.c @@ -992,12 +992,10 @@ static struct iscsi_r2t_info *iscsi_tcp_get_curr_r2t(struct iscsi_task *task) if (r2t == NULL) { if (kfifo_out(&tcp_task->r2tqueue, (void *)&tcp_task->r2t, sizeof(void *)) != - sizeof(void *)) { - WARN_ONCE(1, "unexpected fifo state"); + sizeof(void *)) r2t = NULL; - } - - r2t = tcp_task->r2t; + else + r2t = tcp_task->r2t; } spin_unlock_bh(&session->lock); } diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c index 708ea31..d9b8ca5 100644 --- a/drivers/scsi/megaraid/megaraid_sas.c +++ b/drivers/scsi/megaraid/megaraid_sas.c @@ -3781,6 +3781,7 @@ static int megasas_mgmt_compat_ioctl_fw(struct file *file, unsigned long arg) compat_alloc_user_space(sizeof(struct megasas_iocpacket)); int i; int error = 0; + compat_uptr_t ptr; if (clear_user(ioc, sizeof(*ioc))) return -EFAULT; @@ -3793,9 +3794,22 @@ static int megasas_mgmt_compat_ioctl_fw(struct file *file, unsigned long arg) copy_in_user(&ioc->sge_count, &cioc->sge_count, sizeof(u32))) return -EFAULT; - for (i = 0; i < MAX_IOCTL_SGE; i++) { - compat_uptr_t ptr; + /* + * The sense_ptr is used in megasas_mgmt_fw_ioctl only when + * sense_len is not null, so prepare the 64bit value under + * the same condition. + */ + if (ioc->sense_len) { + void __user **sense_ioc_ptr = + (void __user **)(ioc->frame.raw + ioc->sense_off); + compat_uptr_t *sense_cioc_ptr = + (compat_uptr_t *)(cioc->frame.raw + cioc->sense_off); + if (get_user(ptr, sense_cioc_ptr) || + put_user(compat_ptr(ptr), sense_ioc_ptr)) + return -EFAULT; + } + for (i = 0; i < MAX_IOCTL_SGE; i++) { if (get_user(ptr, &cioc->sgl[i].iov_base) || put_user(compat_ptr(ptr), &ioc->sgl[i].iov_base) || copy_in_user(&ioc->sgl[i].iov_len, diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index c3e37c8..e9b15c3 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -83,6 +83,9 @@ static unsigned int skip_txen_test; /* force skip of txen test at init time */ #define PASS_LIMIT 256 +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + + /* * We default to IRQ0 for the "no irq" hack. Some * machine types want others as well - they're free @@ -1792,7 +1795,7 @@ static unsigned int serial8250_tx_empty(struct uart_port *port) up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; spin_unlock_irqrestore(&up->port.lock, flags); - return lsr & UART_LSR_TEMT ? TIOCSER_TEMT : 0; + return (lsr & BOTH_EMPTY) == BOTH_EMPTY ? TIOCSER_TEMT : 0; } static unsigned int serial8250_get_mctrl(struct uart_port *port) @@ -1850,8 +1853,6 @@ static void serial8250_break_ctl(struct uart_port *port, int break_state) spin_unlock_irqrestore(&up->port.lock, flags); } -#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) - /* * Wait for transmitter & holding register to empty */ diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c index 683e66f..3e2ae48 100644 --- a/drivers/serial/pmac_zilog.c +++ b/drivers/serial/pmac_zilog.c @@ -2031,9 +2031,9 @@ static int __init pmz_console_setup(struct console *co, char *options) /* * XServe's default to 57600 bps */ - if (machine_is_compatible("RackMac1,1") - || machine_is_compatible("RackMac1,2") - || machine_is_compatible("MacRISC4")) + if (of_machine_is_compatible("RackMac1,1") + || of_machine_is_compatible("RackMac1,2") + || of_machine_is_compatible("MacRISC4")) baud = 57600; /* diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index f55eb01..0fee95c 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -100,6 +100,23 @@ config SPI_BUTTERFLY inexpensive battery powered microcontroller evaluation board. This same cable can be used to flash new firmware. +config SPI_COLDFIRE_QSPI + tristate "Freescale Coldfire QSPI controller" + depends on (M520x || M523x || M5249 || M527x || M528x || M532x) + help + This enables support for the Coldfire QSPI controller in master + mode. + + This driver can also be built as a module. If so, the module + will be called coldfire_qspi. + +config SPI_DAVINCI + tristate "SPI controller driver for DaVinci/DA8xx SoC's" + depends on SPI_MASTER && ARCH_DAVINCI + select SPI_BITBANG + help + SPI master controller for DaVinci and DA8xx SPI modules. + config SPI_GPIO tristate "GPIO-based bitbanging SPI Master" depends on GENERIC_GPIO @@ -308,7 +325,7 @@ config SPI_NUC900 # config SPI_DESIGNWARE - bool "DesignWare SPI controller core support" + tristate "DesignWare SPI controller core support" depends on SPI_MASTER help general driver for SPI controller core from DesignWare @@ -317,6 +334,10 @@ config SPI_DW_PCI tristate "PCI interface driver for DW SPI core" depends on SPI_DESIGNWARE && PCI +config SPI_DW_MMIO + tristate "Memory-mapped io interface driver for DW SPI core" + depends on SPI_DESIGNWARE && HAVE_CLK + # # There are lots of SPI device types, with sensors and memory # being probably the most widely used ones. diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index f3d2810..d7d0f89 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -16,8 +16,11 @@ obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o obj-$(CONFIG_SPI_AU1550) += au1550_spi.o obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o +obj-$(CONFIG_SPI_COLDFIRE_QSPI) += coldfire_qspi.o +obj-$(CONFIG_SPI_DAVINCI) += davinci_spi.o obj-$(CONFIG_SPI_DESIGNWARE) += dw_spi.o obj-$(CONFIG_SPI_DW_PCI) += dw_spi_pci.o +obj-$(CONFIG_SPI_DW_MMIO) += dw_spi_mmio.o obj-$(CONFIG_SPI_GPIO) += spi_gpio.o obj-$(CONFIG_SPI_IMX) += spi_imx.o obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o diff --git a/drivers/spi/coldfire_qspi.c b/drivers/spi/coldfire_qspi.c new file mode 100644 index 0000000..59be3ef --- /dev/null +++ b/drivers/spi/coldfire_qspi.c @@ -0,0 +1,640 @@ +/* + * Freescale/Motorola Coldfire Queued SPI driver + * + * Copyright 2010 Steven King <sfking@fdwdc.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA + * +*/ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/errno.h> +#include <linux/platform_device.h> +#include <linux/workqueue.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/spi/spi.h> + +#include <asm/coldfire.h> +#include <asm/mcfqspi.h> + +#define DRIVER_NAME "mcfqspi" + +#define MCFQSPI_BUSCLK (MCF_BUSCLK / 2) + +#define MCFQSPI_QMR 0x00 +#define MCFQSPI_QMR_MSTR 0x8000 +#define MCFQSPI_QMR_CPOL 0x0200 +#define MCFQSPI_QMR_CPHA 0x0100 +#define MCFQSPI_QDLYR 0x04 +#define MCFQSPI_QDLYR_SPE 0x8000 +#define MCFQSPI_QWR 0x08 +#define MCFQSPI_QWR_HALT 0x8000 +#define MCFQSPI_QWR_WREN 0x4000 +#define MCFQSPI_QWR_CSIV 0x1000 +#define MCFQSPI_QIR 0x0C +#define MCFQSPI_QIR_WCEFB 0x8000 +#define MCFQSPI_QIR_ABRTB 0x4000 +#define MCFQSPI_QIR_ABRTL 0x1000 +#define MCFQSPI_QIR_WCEFE 0x0800 +#define MCFQSPI_QIR_ABRTE 0x0400 +#define MCFQSPI_QIR_SPIFE 0x0100 +#define MCFQSPI_QIR_WCEF 0x0008 +#define MCFQSPI_QIR_ABRT 0x0004 +#define MCFQSPI_QIR_SPIF 0x0001 +#define MCFQSPI_QAR 0x010 +#define MCFQSPI_QAR_TXBUF 0x00 +#define MCFQSPI_QAR_RXBUF 0x10 +#define MCFQSPI_QAR_CMDBUF 0x20 +#define MCFQSPI_QDR 0x014 +#define MCFQSPI_QCR 0x014 +#define MCFQSPI_QCR_CONT 0x8000 +#define MCFQSPI_QCR_BITSE 0x4000 +#define MCFQSPI_QCR_DT 0x2000 + +struct mcfqspi { + void __iomem *iobase; + int irq; + struct clk *clk; + struct mcfqspi_cs_control *cs_control; + + wait_queue_head_t waitq; + + struct work_struct work; + struct workqueue_struct *workq; + spinlock_t lock; + struct list_head msgq; +}; + +static void mcfqspi_wr_qmr(struct mcfqspi *mcfqspi, u16 val) +{ + writew(val, mcfqspi->iobase + MCFQSPI_QMR); +} + +static void mcfqspi_wr_qdlyr(struct mcfqspi *mcfqspi, u16 val) +{ + writew(val, mcfqspi->iobase + MCFQSPI_QDLYR); +} + +static u16 mcfqspi_rd_qdlyr(struct mcfqspi *mcfqspi) +{ + return readw(mcfqspi->iobase + MCFQSPI_QDLYR); +} + +static void mcfqspi_wr_qwr(struct mcfqspi *mcfqspi, u16 val) +{ + writew(val, mcfqspi->iobase + MCFQSPI_QWR); +} + +static void mcfqspi_wr_qir(struct mcfqspi *mcfqspi, u16 val) +{ + writew(val, mcfqspi->iobase + MCFQSPI_QIR); +} + +static void mcfqspi_wr_qar(struct mcfqspi *mcfqspi, u16 val) +{ + writew(val, mcfqspi->iobase + MCFQSPI_QAR); +} + +static void mcfqspi_wr_qdr(struct mcfqspi *mcfqspi, u16 val) +{ + writew(val, mcfqspi->iobase + MCFQSPI_QDR); +} + +static u16 mcfqspi_rd_qdr(struct mcfqspi *mcfqspi) +{ + return readw(mcfqspi->iobase + MCFQSPI_QDR); +} + +static void mcfqspi_cs_select(struct mcfqspi *mcfqspi, u8 chip_select, + bool cs_high) +{ + mcfqspi->cs_control->select(mcfqspi->cs_control, chip_select, cs_high); +} + +static void mcfqspi_cs_deselect(struct mcfqspi *mcfqspi, u8 chip_select, + bool cs_high) +{ + mcfqspi->cs_control->deselect(mcfqspi->cs_control, chip_select, cs_high); +} + +static int mcfqspi_cs_setup(struct mcfqspi *mcfqspi) +{ + return (mcfqspi->cs_control && mcfqspi->cs_control->setup) ? + mcfqspi->cs_control->setup(mcfqspi->cs_control) : 0; +} + +static void mcfqspi_cs_teardown(struct mcfqspi *mcfqspi) +{ + if (mcfqspi->cs_control && mcfqspi->cs_control->teardown) + mcfqspi->cs_control->teardown(mcfqspi->cs_control); +} + +static u8 mcfqspi_qmr_baud(u32 speed_hz) +{ + return clamp((MCFQSPI_BUSCLK + speed_hz - 1) / speed_hz, 2u, 255u); +} + +static bool mcfqspi_qdlyr_spe(struct mcfqspi *mcfqspi) +{ + return mcfqspi_rd_qdlyr(mcfqspi) & MCFQSPI_QDLYR_SPE; +} + +static irqreturn_t mcfqspi_irq_handler(int this_irq, void *dev_id) +{ + struct mcfqspi *mcfqspi = dev_id; + + /* clear interrupt */ + mcfqspi_wr_qir(mcfqspi, MCFQSPI_QIR_SPIFE | MCFQSPI_QIR_SPIF); + wake_up(&mcfqspi->waitq); + + return IRQ_HANDLED; +} + +static void mcfqspi_transfer_msg8(struct mcfqspi *mcfqspi, unsigned count, + const u8 *txbuf, u8 *rxbuf) +{ + unsigned i, n, offset = 0; + + n = min(count, 16u); + + mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_CMDBUF); + for (i = 0; i < n; ++i) + mcfqspi_wr_qdr(mcfqspi, MCFQSPI_QCR_BITSE); + + mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_TXBUF); + if (txbuf) + for (i = 0; i < n; ++i) + mcfqspi_wr_qdr(mcfqspi, *txbuf++); + else + for (i = 0; i < count; ++i) + mcfqspi_wr_qdr(mcfqspi, 0); + + count -= n; + if (count) { + u16 qwr = 0xf08; + mcfqspi_wr_qwr(mcfqspi, 0x700); + mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE); + + do { + wait_event(mcfqspi->waitq, !mcfqspi_qdlyr_spe(mcfqspi)); + mcfqspi_wr_qwr(mcfqspi, qwr); + mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE); + if (rxbuf) { + mcfqspi_wr_qar(mcfqspi, + MCFQSPI_QAR_RXBUF + offset); + for (i = 0; i < 8; ++i) + *rxbuf++ = mcfqspi_rd_qdr(mcfqspi); + } + n = min(count, 8u); + if (txbuf) { + mcfqspi_wr_qar(mcfqspi, + MCFQSPI_QAR_TXBUF + offset); + for (i = 0; i < n; ++i) + mcfqspi_wr_qdr(mcfqspi, *txbuf++); + } + qwr = (offset ? 0x808 : 0) + ((n - 1) << 8); + offset ^= 8; + count -= n; + } while (count); + wait_event(mcfqspi->waitq, !mcfqspi_qdlyr_spe(mcfqspi)); + mcfqspi_wr_qwr(mcfqspi, qwr); + mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE); + if (rxbuf) { + mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_RXBUF + offset); + for (i = 0; i < 8; ++i) + *rxbuf++ = mcfqspi_rd_qdr(mcfqspi); + offset ^= 8; + } + } else { + mcfqspi_wr_qwr(mcfqspi, (n - 1) << 8); + mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE); + } + wait_event(mcfqspi->waitq, !mcfqspi_qdlyr_spe(mcfqspi)); + if (rxbuf) { + mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_RXBUF + offset); + for (i = 0; i < n; ++i) + *rxbuf++ = mcfqspi_rd_qdr(mcfqspi); + } +} + +static void mcfqspi_transfer_msg16(struct mcfqspi *mcfqspi, unsigned count, + const u16 *txbuf, u16 *rxbuf) +{ + unsigned i, n, offset = 0; + + n = min(count, 16u); + + mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_CMDBUF); + for (i = 0; i < n; ++i) + mcfqspi_wr_qdr(mcfqspi, MCFQSPI_QCR_BITSE); + + mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_TXBUF); + if (txbuf) + for (i = 0; i < n; ++i) + mcfqspi_wr_qdr(mcfqspi, *txbuf++); + else + for (i = 0; i < count; ++i) + mcfqspi_wr_qdr(mcfqspi, 0); + + count -= n; + if (count) { + u16 qwr = 0xf08; + mcfqspi_wr_qwr(mcfqspi, 0x700); + mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE); + + do { + wait_event(mcfqspi->waitq, !mcfqspi_qdlyr_spe(mcfqspi)); + mcfqspi_wr_qwr(mcfqspi, qwr); + mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE); + if (rxbuf) { + mcfqspi_wr_qar(mcfqspi, + MCFQSPI_QAR_RXBUF + offset); + for (i = 0; i < 8; ++i) + *rxbuf++ = mcfqspi_rd_qdr(mcfqspi); + } + n = min(count, 8u); + if (txbuf) { + mcfqspi_wr_qar(mcfqspi, + MCFQSPI_QAR_TXBUF + offset); + for (i = 0; i < n; ++i) + mcfqspi_wr_qdr(mcfqspi, *txbuf++); + } + qwr = (offset ? 0x808 : 0x000) + ((n - 1) << 8); + offset ^= 8; + count -= n; + } while (count); + wait_event(mcfqspi->waitq, !mcfqspi_qdlyr_spe(mcfqspi)); + mcfqspi_wr_qwr(mcfqspi, qwr); + mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE); + if (rxbuf) { + mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_RXBUF + offset); + for (i = 0; i < 8; ++i) + *rxbuf++ = mcfqspi_rd_qdr(mcfqspi); + offset ^= 8; + } + } else { + mcfqspi_wr_qwr(mcfqspi, (n - 1) << 8); + mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE); + } + wait_event(mcfqspi->waitq, !mcfqspi_qdlyr_spe(mcfqspi)); + if (rxbuf) { + mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_RXBUF + offset); + for (i = 0; i < n; ++i) + *rxbuf++ = mcfqspi_rd_qdr(mcfqspi); + } +} + +static void mcfqspi_work(struct work_struct *work) +{ + struct mcfqspi *mcfqspi = container_of(work, struct mcfqspi, work); + unsigned long flags; + + spin_lock_irqsave(&mcfqspi->lock, flags); + while (!list_empty(&mcfqspi->msgq)) { + struct spi_message *msg; + struct spi_device *spi; + struct spi_transfer *xfer; + int status = 0; + + msg = container_of(mcfqspi->msgq.next, struct spi_message, + queue); + + list_del_init(&mcfqspi->msgq); + spin_unlock_irqrestore(&mcfqspi->lock, flags); + + spi = msg->spi; + + list_for_each_entry(xfer, &msg->transfers, transfer_list) { + bool cs_high = spi->mode & SPI_CS_HIGH; + u16 qmr = MCFQSPI_QMR_MSTR; + + if (xfer->bits_per_word) + qmr |= xfer->bits_per_word << 10; + else + qmr |= spi->bits_per_word << 10; + if (spi->mode & SPI_CPHA) + qmr |= MCFQSPI_QMR_CPHA; + if (spi->mode & SPI_CPOL) + qmr |= MCFQSPI_QMR_CPOL; + if (xfer->speed_hz) + qmr |= mcfqspi_qmr_baud(xfer->speed_hz); + else + qmr |= mcfqspi_qmr_baud(spi->max_speed_hz); + mcfqspi_wr_qmr(mcfqspi, qmr); + + mcfqspi_cs_select(mcfqspi, spi->chip_select, cs_high); + + mcfqspi_wr_qir(mcfqspi, MCFQSPI_QIR_SPIFE); + if ((xfer->bits_per_word ? xfer->bits_per_word : + spi->bits_per_word) == 8) + mcfqspi_transfer_msg8(mcfqspi, xfer->len, + xfer->tx_buf, + xfer->rx_buf); + else + mcfqspi_transfer_msg16(mcfqspi, xfer->len / 2, + xfer->tx_buf, + xfer->rx_buf); + mcfqspi_wr_qir(mcfqspi, 0); + + if (xfer->delay_usecs) + udelay(xfer->delay_usecs); + if (xfer->cs_change) { + if (!list_is_last(&xfer->transfer_list, + &msg->transfers)) + mcfqspi_cs_deselect(mcfqspi, + spi->chip_select, + cs_high); + } else { + if (list_is_last(&xfer->transfer_list, + &msg->transfers)) + mcfqspi_cs_deselect(mcfqspi, + spi->chip_select, + cs_high); + } + msg->actual_length += xfer->len; + } + msg->status = status; + msg->complete(msg->context); + + spin_lock_irqsave(&mcfqspi->lock, flags); + } + spin_unlock_irqrestore(&mcfqspi->lock, flags); +} + +static int mcfqspi_transfer(struct spi_device *spi, struct spi_message *msg) +{ + struct mcfqspi *mcfqspi; + struct spi_transfer *xfer; + unsigned long flags; + + mcfqspi = spi_master_get_devdata(spi->master); + + list_for_each_entry(xfer, &msg->transfers, transfer_list) { + if (xfer->bits_per_word && ((xfer->bits_per_word < 8) + || (xfer->bits_per_word > 16))) { + dev_dbg(&spi->dev, + "%d bits per word is not supported\n", + xfer->bits_per_word); + goto fail; + } + if (xfer->speed_hz) { + u32 real_speed = MCFQSPI_BUSCLK / + mcfqspi_qmr_baud(xfer->speed_hz); + if (real_speed != xfer->speed_hz) + dev_dbg(&spi->dev, + "using speed %d instead of %d\n", + real_speed, xfer->speed_hz); + } + } + msg->status = -EINPROGRESS; + msg->actual_length = 0; + + spin_lock_irqsave(&mcfqspi->lock, flags); + list_add_tail(&msg->queue, &mcfqspi->msgq); + queue_work(mcfqspi->workq, &mcfqspi->work); + spin_unlock_irqrestore(&mcfqspi->lock, flags); + + return 0; +fail: + msg->status = -EINVAL; + return -EINVAL; +} + +static int mcfqspi_setup(struct spi_device *spi) +{ + if ((spi->bits_per_word < 8) || (spi->bits_per_word > 16)) { + dev_dbg(&spi->dev, "%d bits per word is not supported\n", + spi->bits_per_word); + return -EINVAL; + } + if (spi->chip_select >= spi->master->num_chipselect) { + dev_dbg(&spi->dev, "%d chip select is out of range\n", + spi->chip_select); + return -EINVAL; + } + + mcfqspi_cs_deselect(spi_master_get_devdata(spi->master), + spi->chip_select, spi->mode & SPI_CS_HIGH); + + dev_dbg(&spi->dev, + "bits per word %d, chip select %d, speed %d KHz\n", + spi->bits_per_word, spi->chip_select, + (MCFQSPI_BUSCLK / mcfqspi_qmr_baud(spi->max_speed_hz)) + / 1000); + + return 0; +} + +static int __devinit mcfqspi_probe(struct platform_device *pdev) +{ + struct spi_master *master; + struct mcfqspi *mcfqspi; + struct resource *res; + struct mcfqspi_platform_data *pdata; + int status; + + master = spi_alloc_master(&pdev->dev, sizeof(*mcfqspi)); + if (master == NULL) { + dev_dbg(&pdev->dev, "spi_alloc_master failed\n"); + return -ENOMEM; + } + + mcfqspi = spi_master_get_devdata(master); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_dbg(&pdev->dev, "platform_get_resource failed\n"); + status = -ENXIO; + goto fail0; + } + + if (!request_mem_region(res->start, resource_size(res), pdev->name)) { + dev_dbg(&pdev->dev, "request_mem_region failed\n"); + status = -EBUSY; + goto fail0; + } + + mcfqspi->iobase = ioremap(res->start, resource_size(res)); + if (!mcfqspi->iobase) { + dev_dbg(&pdev->dev, "ioremap failed\n"); + status = -ENOMEM; + goto fail1; + } + + mcfqspi->irq = platform_get_irq(pdev, 0); + if (mcfqspi->irq < 0) { + dev_dbg(&pdev->dev, "platform_get_irq failed\n"); + status = -ENXIO; + goto fail2; + } + + status = request_irq(mcfqspi->irq, mcfqspi_irq_handler, IRQF_DISABLED, + pdev->name, mcfqspi); + if (status) { + dev_dbg(&pdev->dev, "request_irq failed\n"); + goto fail2; + } + + mcfqspi->clk = clk_get(&pdev->dev, "qspi_clk"); + if (IS_ERR(mcfqspi->clk)) { + dev_dbg(&pdev->dev, "clk_get failed\n"); + status = PTR_ERR(mcfqspi->clk); + goto fail3; + } + clk_enable(mcfqspi->clk); + + mcfqspi->workq = create_singlethread_workqueue(dev_name(master->dev.parent)); + if (!mcfqspi->workq) { + dev_dbg(&pdev->dev, "create_workqueue failed\n"); + status = -ENOMEM; + goto fail4; + } + INIT_WORK(&mcfqspi->work, mcfqspi_work); + spin_lock_init(&mcfqspi->lock); + INIT_LIST_HEAD(&mcfqspi->msgq); + init_waitqueue_head(&mcfqspi->waitq); + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_dbg(&pdev->dev, "platform data is missing\n"); + goto fail5; + } + master->bus_num = pdata->bus_num; + master->num_chipselect = pdata->num_chipselect; + + mcfqspi->cs_control = pdata->cs_control; + status = mcfqspi_cs_setup(mcfqspi); + if (status) { + dev_dbg(&pdev->dev, "error initializing cs_control\n"); + goto fail5; + } + + master->mode_bits = SPI_CS_HIGH | SPI_CPOL | SPI_CPHA; + master->setup = mcfqspi_setup; + master->transfer = mcfqspi_transfer; + + platform_set_drvdata(pdev, master); + + status = spi_register_master(master); + if (status) { + dev_dbg(&pdev->dev, "spi_register_master failed\n"); + goto fail6; + } + dev_info(&pdev->dev, "Coldfire QSPI bus driver\n"); + + return 0; + +fail6: + mcfqspi_cs_teardown(mcfqspi); +fail5: + destroy_workqueue(mcfqspi->workq); +fail4: + clk_disable(mcfqspi->clk); + clk_put(mcfqspi->clk); +fail3: + free_irq(mcfqspi->irq, mcfqspi); +fail2: + iounmap(mcfqspi->iobase); +fail1: + release_mem_region(res->start, resource_size(res)); +fail0: + spi_master_put(master); + + dev_dbg(&pdev->dev, "Coldfire QSPI probe failed\n"); + + return status; +} + +static int __devexit mcfqspi_remove(struct platform_device *pdev) +{ + struct spi_master *master = platform_get_drvdata(pdev); + struct mcfqspi *mcfqspi = spi_master_get_devdata(master); + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + /* disable the hardware (set the baud rate to 0) */ + mcfqspi_wr_qmr(mcfqspi, MCFQSPI_QMR_MSTR); + + platform_set_drvdata(pdev, NULL); + mcfqspi_cs_teardown(mcfqspi); + destroy_workqueue(mcfqspi->workq); + clk_disable(mcfqspi->clk); + clk_put(mcfqspi->clk); + free_irq(mcfqspi->irq, mcfqspi); + iounmap(mcfqspi->iobase); + release_mem_region(res->start, resource_size(res)); + spi_unregister_master(master); + spi_master_put(master); + + return 0; +} + +#ifdef CONFIG_PM + +static int mcfqspi_suspend(struct device *dev) +{ + struct mcfqspi *mcfqspi = platform_get_drvdata(to_platform_device(dev)); + + clk_disable(mcfqspi->clk); + + return 0; +} + +static int mcfqspi_resume(struct device *dev) +{ + struct mcfqspi *mcfqspi = platform_get_drvdata(to_platform_device(dev)); + + clk_enable(mcfqspi->clk); + + return 0; +} + +static struct dev_pm_ops mcfqspi_dev_pm_ops = { + .suspend = mcfqspi_suspend, + .resume = mcfqspi_resume, +}; + +#define MCFQSPI_DEV_PM_OPS (&mcfqspi_dev_pm_ops) +#else +#define MCFQSPI_DEV_PM_OPS NULL +#endif + +static struct platform_driver mcfqspi_driver = { + .driver.name = DRIVER_NAME, + .driver.owner = THIS_MODULE, + .driver.pm = MCFQSPI_DEV_PM_OPS, + .remove = __devexit_p(mcfqspi_remove), +}; + +static int __init mcfqspi_init(void) +{ + return platform_driver_probe(&mcfqspi_driver, mcfqspi_probe); +} +module_init(mcfqspi_init); + +static void __exit mcfqspi_exit(void) +{ + platform_driver_unregister(&mcfqspi_driver); +} +module_exit(mcfqspi_exit); + +MODULE_AUTHOR("Steven King <sfking@fdwdc.com>"); +MODULE_DESCRIPTION("Coldfire QSPI Controller Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/drivers/spi/davinci_spi.c b/drivers/spi/davinci_spi.c new file mode 100644 index 0000000..225ab60 --- /dev/null +++ b/drivers/spi/davinci_spi.c @@ -0,0 +1,1255 @@ +/* + * Copyright (C) 2009 Texas Instruments. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/dma-mapping.h> +#include <linux/spi/spi.h> +#include <linux/spi/spi_bitbang.h> + +#include <mach/spi.h> +#include <mach/edma.h> + +#define SPI_NO_RESOURCE ((resource_size_t)-1) + +#define SPI_MAX_CHIPSELECT 2 + +#define CS_DEFAULT 0xFF + +#define SPI_BUFSIZ (SMP_CACHE_BYTES + 1) +#define DAVINCI_DMA_DATA_TYPE_S8 0x01 +#define DAVINCI_DMA_DATA_TYPE_S16 0x02 +#define DAVINCI_DMA_DATA_TYPE_S32 0x04 + +#define SPIFMT_PHASE_MASK BIT(16) +#define SPIFMT_POLARITY_MASK BIT(17) +#define SPIFMT_DISTIMER_MASK BIT(18) +#define SPIFMT_SHIFTDIR_MASK BIT(20) +#define SPIFMT_WAITENA_MASK BIT(21) +#define SPIFMT_PARITYENA_MASK BIT(22) +#define SPIFMT_ODD_PARITY_MASK BIT(23) +#define SPIFMT_WDELAY_MASK 0x3f000000u +#define SPIFMT_WDELAY_SHIFT 24 +#define SPIFMT_CHARLEN_MASK 0x0000001Fu + +/* SPIGCR1 */ +#define SPIGCR1_SPIENA_MASK 0x01000000u + +/* SPIPC0 */ +#define SPIPC0_DIFUN_MASK BIT(11) /* MISO */ +#define SPIPC0_DOFUN_MASK BIT(10) /* MOSI */ +#define SPIPC0_CLKFUN_MASK BIT(9) /* CLK */ +#define SPIPC0_SPIENA_MASK BIT(8) /* nREADY */ +#define SPIPC0_EN1FUN_MASK BIT(1) +#define SPIPC0_EN0FUN_MASK BIT(0) + +#define SPIINT_MASKALL 0x0101035F +#define SPI_INTLVL_1 0x000001FFu +#define SPI_INTLVL_0 0x00000000u + +/* SPIDAT1 */ +#define SPIDAT1_CSHOLD_SHIFT 28 +#define SPIDAT1_CSNR_SHIFT 16 +#define SPIGCR1_CLKMOD_MASK BIT(1) +#define SPIGCR1_MASTER_MASK BIT(0) +#define SPIGCR1_LOOPBACK_MASK BIT(16) + +/* SPIBUF */ +#define SPIBUF_TXFULL_MASK BIT(29) +#define SPIBUF_RXEMPTY_MASK BIT(31) + +/* Error Masks */ +#define SPIFLG_DLEN_ERR_MASK BIT(0) +#define SPIFLG_TIMEOUT_MASK BIT(1) +#define SPIFLG_PARERR_MASK BIT(2) +#define SPIFLG_DESYNC_MASK BIT(3) +#define SPIFLG_BITERR_MASK BIT(4) +#define SPIFLG_OVRRUN_MASK BIT(6) +#define SPIFLG_RX_INTR_MASK BIT(8) +#define SPIFLG_TX_INTR_MASK BIT(9) +#define SPIFLG_BUF_INIT_ACTIVE_MASK BIT(24) +#define SPIFLG_MASK (SPIFLG_DLEN_ERR_MASK \ + | SPIFLG_TIMEOUT_MASK | SPIFLG_PARERR_MASK \ + | SPIFLG_DESYNC_MASK | SPIFLG_BITERR_MASK \ + | SPIFLG_OVRRUN_MASK | SPIFLG_RX_INTR_MASK \ + | SPIFLG_TX_INTR_MASK \ + | SPIFLG_BUF_INIT_ACTIVE_MASK) + +#define SPIINT_DLEN_ERR_INTR BIT(0) +#define SPIINT_TIMEOUT_INTR BIT(1) +#define SPIINT_PARERR_INTR BIT(2) +#define SPIINT_DESYNC_INTR BIT(3) +#define SPIINT_BITERR_INTR BIT(4) +#define SPIINT_OVRRUN_INTR BIT(6) +#define SPIINT_RX_INTR BIT(8) +#define SPIINT_TX_INTR BIT(9) +#define SPIINT_DMA_REQ_EN BIT(16) +#define SPIINT_ENABLE_HIGHZ BIT(24) + +#define SPI_T2CDELAY_SHIFT 16 +#define SPI_C2TDELAY_SHIFT 24 + +/* SPI Controller registers */ +#define SPIGCR0 0x00 +#define SPIGCR1 0x04 +#define SPIINT 0x08 +#define SPILVL 0x0c +#define SPIFLG 0x10 +#define SPIPC0 0x14 +#define SPIPC1 0x18 +#define SPIPC2 0x1c +#define SPIPC3 0x20 +#define SPIPC4 0x24 +#define SPIPC5 0x28 +#define SPIPC6 0x2c +#define SPIPC7 0x30 +#define SPIPC8 0x34 +#define SPIDAT0 0x38 +#define SPIDAT1 0x3c +#define SPIBUF 0x40 +#define SPIEMU 0x44 +#define SPIDELAY 0x48 +#define SPIDEF 0x4c +#define SPIFMT0 0x50 +#define SPIFMT1 0x54 +#define SPIFMT2 0x58 +#define SPIFMT3 0x5c +#define TGINTVEC0 0x60 +#define TGINTVEC1 0x64 + +struct davinci_spi_slave { + u32 cmd_to_write; + u32 clk_ctrl_to_write; + u32 bytes_per_word; + u8 active_cs; +}; + +/* We have 2 DMA channels per CS, one for RX and one for TX */ +struct davinci_spi_dma { + int dma_tx_channel; + int dma_rx_channel; + int dma_tx_sync_dev; + int dma_rx_sync_dev; + enum dma_event_q eventq; + + struct completion dma_tx_completion; + struct completion dma_rx_completion; +}; + +/* SPI Controller driver's private data. */ +struct davinci_spi { + struct spi_bitbang bitbang; + struct clk *clk; + + u8 version; + resource_size_t pbase; + void __iomem *base; + size_t region_size; + u32 irq; + struct completion done; + + const void *tx; + void *rx; + u8 *tmp_buf; + int count; + struct davinci_spi_dma *dma_channels; + struct davinci_spi_platform_data *pdata; + + void (*get_rx)(u32 rx_data, struct davinci_spi *); + u32 (*get_tx)(struct davinci_spi *); + + struct davinci_spi_slave slave[SPI_MAX_CHIPSELECT]; +}; + +static unsigned use_dma; + +static void davinci_spi_rx_buf_u8(u32 data, struct davinci_spi *davinci_spi) +{ + u8 *rx = davinci_spi->rx; + + *rx++ = (u8)data; + davinci_spi->rx = rx; +} + +static void davinci_spi_rx_buf_u16(u32 data, struct davinci_spi *davinci_spi) +{ + u16 *rx = davinci_spi->rx; + + *rx++ = (u16)data; + davinci_spi->rx = rx; +} + +static u32 davinci_spi_tx_buf_u8(struct davinci_spi *davinci_spi) +{ + u32 data; + const u8 *tx = davinci_spi->tx; + + data = *tx++; + davinci_spi->tx = tx; + return data; +} + +static u32 davinci_spi_tx_buf_u16(struct davinci_spi *davinci_spi) +{ + u32 data; + const u16 *tx = davinci_spi->tx; + + data = *tx++; + davinci_spi->tx = tx; + return data; +} + +static inline void set_io_bits(void __iomem *addr, u32 bits) +{ + u32 v = ioread32(addr); + + v |= bits; + iowrite32(v, addr); +} + +static inline void clear_io_bits(void __iomem *addr, u32 bits) +{ + u32 v = ioread32(addr); + + v &= ~bits; + iowrite32(v, addr); +} + +static inline void set_fmt_bits(void __iomem *addr, u32 bits, int cs_num) +{ + set_io_bits(addr + SPIFMT0 + (0x4 * cs_num), bits); +} + +static inline void clear_fmt_bits(void __iomem *addr, u32 bits, int cs_num) +{ + clear_io_bits(addr + SPIFMT0 + (0x4 * cs_num), bits); +} + +static void davinci_spi_set_dma_req(const struct spi_device *spi, int enable) +{ + struct davinci_spi *davinci_spi = spi_master_get_devdata(spi->master); + + if (enable) + set_io_bits(davinci_spi->base + SPIINT, SPIINT_DMA_REQ_EN); + else + clear_io_bits(davinci_spi->base + SPIINT, SPIINT_DMA_REQ_EN); +} + +/* + * Interface to control the chip select signal + */ +static void davinci_spi_chipselect(struct spi_device *spi, int value) +{ + struct davinci_spi *davinci_spi; + struct davinci_spi_platform_data *pdata; + u32 data1_reg_val = 0; + + davinci_spi = spi_master_get_devdata(spi->master); + pdata = davinci_spi->pdata; + + /* + * Board specific chip select logic decides the polarity and cs + * line for the controller + */ + if (value == BITBANG_CS_INACTIVE) { + set_io_bits(davinci_spi->base + SPIDEF, CS_DEFAULT); + + data1_reg_val |= CS_DEFAULT << SPIDAT1_CSNR_SHIFT; + iowrite32(data1_reg_val, davinci_spi->base + SPIDAT1); + + while ((ioread32(davinci_spi->base + SPIBUF) + & SPIBUF_RXEMPTY_MASK) == 0) + cpu_relax(); + } +} + +/** + * davinci_spi_setup_transfer - This functions will determine transfer method + * @spi: spi device on which data transfer to be done + * @t: spi transfer in which transfer info is filled + * + * This function determines data transfer method (8/16/32 bit transfer). + * It will also set the SPI Clock Control register according to + * SPI slave device freq. + */ +static int davinci_spi_setup_transfer(struct spi_device *spi, + struct spi_transfer *t) +{ + + struct davinci_spi *davinci_spi; + struct davinci_spi_platform_data *pdata; + u8 bits_per_word = 0; + u32 hz = 0, prescale; + + davinci_spi = spi_master_get_devdata(spi->master); + pdata = davinci_spi->pdata; + + if (t) { + bits_per_word = t->bits_per_word; + hz = t->speed_hz; + } + + /* if bits_per_word is not set then set it default */ + if (!bits_per_word) + bits_per_word = spi->bits_per_word; + + /* + * Assign function pointer to appropriate transfer method + * 8bit, 16bit or 32bit transfer + */ + if (bits_per_word <= 8 && bits_per_word >= 2) { + davinci_spi->get_rx = davinci_spi_rx_buf_u8; + davinci_spi->get_tx = davinci_spi_tx_buf_u8; + davinci_spi->slave[spi->chip_select].bytes_per_word = 1; + } else if (bits_per_word <= 16 && bits_per_word >= 2) { + davinci_spi->get_rx = davinci_spi_rx_buf_u16; + davinci_spi->get_tx = davinci_spi_tx_buf_u16; + davinci_spi->slave[spi->chip_select].bytes_per_word = 2; + } else + return -EINVAL; + + if (!hz) + hz = spi->max_speed_hz; + + clear_fmt_bits(davinci_spi->base, SPIFMT_CHARLEN_MASK, + spi->chip_select); + set_fmt_bits(davinci_spi->base, bits_per_word & 0x1f, + spi->chip_select); + + prescale = ((clk_get_rate(davinci_spi->clk) / hz) - 1) & 0xff; + + clear_fmt_bits(davinci_spi->base, 0x0000ff00, spi->chip_select); + set_fmt_bits(davinci_spi->base, prescale << 8, spi->chip_select); + + return 0; +} + +static void davinci_spi_dma_rx_callback(unsigned lch, u16 ch_status, void *data) +{ + struct spi_device *spi = (struct spi_device *)data; + struct davinci_spi *davinci_spi; + struct davinci_spi_dma *davinci_spi_dma; + struct davinci_spi_platform_data *pdata; + + davinci_spi = spi_master_get_devdata(spi->master); + davinci_spi_dma = &(davinci_spi->dma_channels[spi->chip_select]); + pdata = davinci_spi->pdata; + + if (ch_status == DMA_COMPLETE) + edma_stop(davinci_spi_dma->dma_rx_channel); + else + edma_clean_channel(davinci_spi_dma->dma_rx_channel); + + complete(&davinci_spi_dma->dma_rx_completion); + /* We must disable the DMA RX request */ + davinci_spi_set_dma_req(spi, 0); +} + +static void davinci_spi_dma_tx_callback(unsigned lch, u16 ch_status, void *data) +{ + struct spi_device *spi = (struct spi_device *)data; + struct davinci_spi *davinci_spi; + struct davinci_spi_dma *davinci_spi_dma; + struct davinci_spi_platform_data *pdata; + + davinci_spi = spi_master_get_devdata(spi->master); + davinci_spi_dma = &(davinci_spi->dma_channels[spi->chip_select]); + pdata = davinci_spi->pdata; + + if (ch_status == DMA_COMPLETE) + edma_stop(davinci_spi_dma->dma_tx_channel); + else + edma_clean_channel(davinci_spi_dma->dma_tx_channel); + + complete(&davinci_spi_dma->dma_tx_completion); + /* We must disable the DMA TX request */ + davinci_spi_set_dma_req(spi, 0); +} + +static int davinci_spi_request_dma(struct spi_device *spi) +{ + struct davinci_spi *davinci_spi; + struct davinci_spi_dma *davinci_spi_dma; + struct davinci_spi_platform_data *pdata; + struct device *sdev; + int r; + + davinci_spi = spi_master_get_devdata(spi->master); + davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select]; + pdata = davinci_spi->pdata; + sdev = davinci_spi->bitbang.master->dev.parent; + + r = edma_alloc_channel(davinci_spi_dma->dma_rx_sync_dev, + davinci_spi_dma_rx_callback, spi, + davinci_spi_dma->eventq); + if (r < 0) { + dev_dbg(sdev, "Unable to request DMA channel for SPI RX\n"); + return -EAGAIN; + } + davinci_spi_dma->dma_rx_channel = r; + r = edma_alloc_channel(davinci_spi_dma->dma_tx_sync_dev, + davinci_spi_dma_tx_callback, spi, + davinci_spi_dma->eventq); + if (r < 0) { + edma_free_channel(davinci_spi_dma->dma_rx_channel); + davinci_spi_dma->dma_rx_channel = -1; + dev_dbg(sdev, "Unable to request DMA channel for SPI TX\n"); + return -EAGAIN; + } + davinci_spi_dma->dma_tx_channel = r; + + return 0; +} + +/** + * davinci_spi_setup - This functions will set default transfer method + * @spi: spi device on which data transfer to be done + * + * This functions sets the default transfer method. + */ + +static int davinci_spi_setup(struct spi_device *spi) +{ + int retval; + struct davinci_spi *davinci_spi; + struct davinci_spi_dma *davinci_spi_dma; + struct device *sdev; + + davinci_spi = spi_master_get_devdata(spi->master); + sdev = davinci_spi->bitbang.master->dev.parent; + + /* if bits per word length is zero then set it default 8 */ + if (!spi->bits_per_word) + spi->bits_per_word = 8; + + davinci_spi->slave[spi->chip_select].cmd_to_write = 0; + + if (use_dma && davinci_spi->dma_channels) { + davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select]; + + if ((davinci_spi_dma->dma_rx_channel == -1) + || (davinci_spi_dma->dma_tx_channel == -1)) { + retval = davinci_spi_request_dma(spi); + if (retval < 0) + return retval; + } + } + + /* + * SPI in DaVinci and DA8xx operate between + * 600 KHz and 50 MHz + */ + if (spi->max_speed_hz < 600000 || spi->max_speed_hz > 50000000) { + dev_dbg(sdev, "Operating frequency is not in acceptable " + "range\n"); + return -EINVAL; + } + + /* + * Set up SPIFMTn register, unique to this chipselect. + * + * NOTE: we could do all of these with one write. Also, some + * of the "version 2" features are found in chips that don't + * support all of them... + */ + if (spi->mode & SPI_LSB_FIRST) + set_fmt_bits(davinci_spi->base, SPIFMT_SHIFTDIR_MASK, + spi->chip_select); + else + clear_fmt_bits(davinci_spi->base, SPIFMT_SHIFTDIR_MASK, + spi->chip_select); + + if (spi->mode & SPI_CPOL) + set_fmt_bits(davinci_spi->base, SPIFMT_POLARITY_MASK, + spi->chip_select); + else + clear_fmt_bits(davinci_spi->base, SPIFMT_POLARITY_MASK, + spi->chip_select); + + if (!(spi->mode & SPI_CPHA)) + set_fmt_bits(davinci_spi->base, SPIFMT_PHASE_MASK, + spi->chip_select); + else + clear_fmt_bits(davinci_spi->base, SPIFMT_PHASE_MASK, + spi->chip_select); + + /* + * Version 1 hardware supports two basic SPI modes: + * - Standard SPI mode uses 4 pins, with chipselect + * - 3 pin SPI is a 4 pin variant without CS (SPI_NO_CS) + * (distinct from SPI_3WIRE, with just one data wire; + * or similar variants without MOSI or without MISO) + * + * Version 2 hardware supports an optional handshaking signal, + * so it can support two more modes: + * - 5 pin SPI variant is standard SPI plus SPI_READY + * - 4 pin with enable is (SPI_READY | SPI_NO_CS) + */ + + if (davinci_spi->version == SPI_VERSION_2) { + clear_fmt_bits(davinci_spi->base, SPIFMT_WDELAY_MASK, + spi->chip_select); + set_fmt_bits(davinci_spi->base, + (davinci_spi->pdata->wdelay + << SPIFMT_WDELAY_SHIFT) + & SPIFMT_WDELAY_MASK, + spi->chip_select); + + if (davinci_spi->pdata->odd_parity) + set_fmt_bits(davinci_spi->base, + SPIFMT_ODD_PARITY_MASK, + spi->chip_select); + else + clear_fmt_bits(davinci_spi->base, + SPIFMT_ODD_PARITY_MASK, + spi->chip_select); + + if (davinci_spi->pdata->parity_enable) + set_fmt_bits(davinci_spi->base, + SPIFMT_PARITYENA_MASK, + spi->chip_select); + else + clear_fmt_bits(davinci_spi->base, + SPIFMT_PARITYENA_MASK, + spi->chip_select); + + if (davinci_spi->pdata->wait_enable) + set_fmt_bits(davinci_spi->base, + SPIFMT_WAITENA_MASK, + spi->chip_select); + else + clear_fmt_bits(davinci_spi->base, + SPIFMT_WAITENA_MASK, + spi->chip_select); + + if (davinci_spi->pdata->timer_disable) + set_fmt_bits(davinci_spi->base, + SPIFMT_DISTIMER_MASK, + spi->chip_select); + else + clear_fmt_bits(davinci_spi->base, + SPIFMT_DISTIMER_MASK, + spi->chip_select); + } + + retval = davinci_spi_setup_transfer(spi, NULL); + + return retval; +} + +static void davinci_spi_cleanup(struct spi_device *spi) +{ + struct davinci_spi *davinci_spi = spi_master_get_devdata(spi->master); + struct davinci_spi_dma *davinci_spi_dma; + + davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select]; + + if (use_dma && davinci_spi->dma_channels) { + davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select]; + + if ((davinci_spi_dma->dma_rx_channel != -1) + && (davinci_spi_dma->dma_tx_channel != -1)) { + edma_free_channel(davinci_spi_dma->dma_tx_channel); + edma_free_channel(davinci_spi_dma->dma_rx_channel); + } + } +} + +static int davinci_spi_bufs_prep(struct spi_device *spi, + struct davinci_spi *davinci_spi) +{ + int op_mode = 0; + + /* + * REVISIT unless devices disagree about SPI_LOOP or + * SPI_READY (SPI_NO_CS only allows one device!), this + * should not need to be done before each message... + * optimize for both flags staying cleared. + */ + + op_mode = SPIPC0_DIFUN_MASK + | SPIPC0_DOFUN_MASK + | SPIPC0_CLKFUN_MASK; + if (!(spi->mode & SPI_NO_CS)) + op_mode |= 1 << spi->chip_select; + if (spi->mode & SPI_READY) + op_mode |= SPIPC0_SPIENA_MASK; + + iowrite32(op_mode, davinci_spi->base + SPIPC0); + + if (spi->mode & SPI_LOOP) + set_io_bits(davinci_spi->base + SPIGCR1, + SPIGCR1_LOOPBACK_MASK); + else + clear_io_bits(davinci_spi->base + SPIGCR1, + SPIGCR1_LOOPBACK_MASK); + + return 0; +} + +static int davinci_spi_check_error(struct davinci_spi *davinci_spi, + int int_status) +{ + struct device *sdev = davinci_spi->bitbang.master->dev.parent; + + if (int_status & SPIFLG_TIMEOUT_MASK) { + dev_dbg(sdev, "SPI Time-out Error\n"); + return -ETIMEDOUT; + } + if (int_status & SPIFLG_DESYNC_MASK) { + dev_dbg(sdev, "SPI Desynchronization Error\n"); + return -EIO; + } + if (int_status & SPIFLG_BITERR_MASK) { + dev_dbg(sdev, "SPI Bit error\n"); + return -EIO; + } + + if (davinci_spi->version == SPI_VERSION_2) { + if (int_status & SPIFLG_DLEN_ERR_MASK) { + dev_dbg(sdev, "SPI Data Length Error\n"); + return -EIO; + } + if (int_status & SPIFLG_PARERR_MASK) { + dev_dbg(sdev, "SPI Parity Error\n"); + return -EIO; + } + if (int_status & SPIFLG_OVRRUN_MASK) { + dev_dbg(sdev, "SPI Data Overrun error\n"); + return -EIO; + } + if (int_status & SPIFLG_TX_INTR_MASK) { + dev_dbg(sdev, "SPI TX intr bit set\n"); + return -EIO; + } + if (int_status & SPIFLG_BUF_INIT_ACTIVE_MASK) { + dev_dbg(sdev, "SPI Buffer Init Active\n"); + return -EBUSY; + } + } + + return 0; +} + +/** + * davinci_spi_bufs - functions which will handle transfer data + * @spi: spi device on which data transfer to be done + * @t: spi transfer in which transfer info is filled + * + * This function will put data to be transferred into data register + * of SPI controller and then wait until the completion will be marked + * by the IRQ Handler. + */ +static int davinci_spi_bufs_pio(struct spi_device *spi, struct spi_transfer *t) +{ + struct davinci_spi *davinci_spi; + int int_status, count, ret; + u8 conv, tmp; + u32 tx_data, data1_reg_val; + u32 buf_val, flg_val; + struct davinci_spi_platform_data *pdata; + + davinci_spi = spi_master_get_devdata(spi->master); + pdata = davinci_spi->pdata; + + davinci_spi->tx = t->tx_buf; + davinci_spi->rx = t->rx_buf; + + /* convert len to words based on bits_per_word */ + conv = davinci_spi->slave[spi->chip_select].bytes_per_word; + davinci_spi->count = t->len / conv; + + INIT_COMPLETION(davinci_spi->done); + + ret = davinci_spi_bufs_prep(spi, davinci_spi); + if (ret) + return ret; + + /* Enable SPI */ + set_io_bits(davinci_spi->base + SPIGCR1, SPIGCR1_SPIENA_MASK); + + iowrite32(0 | (pdata->c2tdelay << SPI_C2TDELAY_SHIFT) | + (pdata->t2cdelay << SPI_T2CDELAY_SHIFT), + davinci_spi->base + SPIDELAY); + + count = davinci_spi->count; + data1_reg_val = pdata->cs_hold << SPIDAT1_CSHOLD_SHIFT; + tmp = ~(0x1 << spi->chip_select); + + clear_io_bits(davinci_spi->base + SPIDEF, ~tmp); + + data1_reg_val |= tmp << SPIDAT1_CSNR_SHIFT; + + while ((ioread32(davinci_spi->base + SPIBUF) + & SPIBUF_RXEMPTY_MASK) == 0) + cpu_relax(); + + /* Determine the command to execute READ or WRITE */ + if (t->tx_buf) { + clear_io_bits(davinci_spi->base + SPIINT, SPIINT_MASKALL); + + while (1) { + tx_data = davinci_spi->get_tx(davinci_spi); + + data1_reg_val &= ~(0xFFFF); + data1_reg_val |= (0xFFFF & tx_data); + + buf_val = ioread32(davinci_spi->base + SPIBUF); + if ((buf_val & SPIBUF_TXFULL_MASK) == 0) { + iowrite32(data1_reg_val, + davinci_spi->base + SPIDAT1); + + count--; + } + while (ioread32(davinci_spi->base + SPIBUF) + & SPIBUF_RXEMPTY_MASK) + cpu_relax(); + + /* getting the returned byte */ + if (t->rx_buf) { + buf_val = ioread32(davinci_spi->base + SPIBUF); + davinci_spi->get_rx(buf_val, davinci_spi); + } + if (count <= 0) + break; + } + } else { + if (pdata->poll_mode) { + while (1) { + /* keeps the serial clock going */ + if ((ioread32(davinci_spi->base + SPIBUF) + & SPIBUF_TXFULL_MASK) == 0) + iowrite32(data1_reg_val, + davinci_spi->base + SPIDAT1); + + while (ioread32(davinci_spi->base + SPIBUF) & + SPIBUF_RXEMPTY_MASK) + cpu_relax(); + + flg_val = ioread32(davinci_spi->base + SPIFLG); + buf_val = ioread32(davinci_spi->base + SPIBUF); + + davinci_spi->get_rx(buf_val, davinci_spi); + + count--; + if (count <= 0) + break; + } + } else { /* Receive in Interrupt mode */ + int i; + + for (i = 0; i < davinci_spi->count; i++) { + set_io_bits(davinci_spi->base + SPIINT, + SPIINT_BITERR_INTR + | SPIINT_OVRRUN_INTR + | SPIINT_RX_INTR); + + iowrite32(data1_reg_val, + davinci_spi->base + SPIDAT1); + + while (ioread32(davinci_spi->base + SPIINT) & + SPIINT_RX_INTR) + cpu_relax(); + } + iowrite32((data1_reg_val & 0x0ffcffff), + davinci_spi->base + SPIDAT1); + } + } + + /* + * Check for bit error, desync error,parity error,timeout error and + * receive overflow errors + */ + int_status = ioread32(davinci_spi->base + SPIFLG); + + ret = davinci_spi_check_error(davinci_spi, int_status); + if (ret != 0) + return ret; + + /* SPI Framework maintains the count only in bytes so convert back */ + davinci_spi->count *= conv; + + return t->len; +} + +#define DAVINCI_DMA_DATA_TYPE_S8 0x01 +#define DAVINCI_DMA_DATA_TYPE_S16 0x02 +#define DAVINCI_DMA_DATA_TYPE_S32 0x04 + +static int davinci_spi_bufs_dma(struct spi_device *spi, struct spi_transfer *t) +{ + struct davinci_spi *davinci_spi; + int int_status = 0; + int count, temp_count; + u8 conv = 1; + u8 tmp; + u32 data1_reg_val; + struct davinci_spi_dma *davinci_spi_dma; + int word_len, data_type, ret; + unsigned long tx_reg, rx_reg; + struct davinci_spi_platform_data *pdata; + struct device *sdev; + + davinci_spi = spi_master_get_devdata(spi->master); + pdata = davinci_spi->pdata; + sdev = davinci_spi->bitbang.master->dev.parent; + + davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select]; + + tx_reg = (unsigned long)davinci_spi->pbase + SPIDAT1; + rx_reg = (unsigned long)davinci_spi->pbase + SPIBUF; + + davinci_spi->tx = t->tx_buf; + davinci_spi->rx = t->rx_buf; + + /* convert len to words based on bits_per_word */ + conv = davinci_spi->slave[spi->chip_select].bytes_per_word; + davinci_spi->count = t->len / conv; + + INIT_COMPLETION(davinci_spi->done); + + init_completion(&davinci_spi_dma->dma_rx_completion); + init_completion(&davinci_spi_dma->dma_tx_completion); + + word_len = conv * 8; + + if (word_len <= 8) + data_type = DAVINCI_DMA_DATA_TYPE_S8; + else if (word_len <= 16) + data_type = DAVINCI_DMA_DATA_TYPE_S16; + else if (word_len <= 32) + data_type = DAVINCI_DMA_DATA_TYPE_S32; + else + return -EINVAL; + + ret = davinci_spi_bufs_prep(spi, davinci_spi); + if (ret) + return ret; + + /* Put delay val if required */ + iowrite32(0 | (pdata->c2tdelay << SPI_C2TDELAY_SHIFT) | + (pdata->t2cdelay << SPI_T2CDELAY_SHIFT), + davinci_spi->base + SPIDELAY); + + count = davinci_spi->count; /* the number of elements */ + data1_reg_val = pdata->cs_hold << SPIDAT1_CSHOLD_SHIFT; + + /* CS default = 0xFF */ + tmp = ~(0x1 << spi->chip_select); + + clear_io_bits(davinci_spi->base + SPIDEF, ~tmp); + + data1_reg_val |= tmp << SPIDAT1_CSNR_SHIFT; + + /* disable all interrupts for dma transfers */ + clear_io_bits(davinci_spi->base + SPIINT, SPIINT_MASKALL); + /* Disable SPI to write configuration bits in SPIDAT */ + clear_io_bits(davinci_spi->base + SPIGCR1, SPIGCR1_SPIENA_MASK); + iowrite32(data1_reg_val, davinci_spi->base + SPIDAT1); + /* Enable SPI */ + set_io_bits(davinci_spi->base + SPIGCR1, SPIGCR1_SPIENA_MASK); + + while ((ioread32(davinci_spi->base + SPIBUF) + & SPIBUF_RXEMPTY_MASK) == 0) + cpu_relax(); + + + if (t->tx_buf) { + t->tx_dma = dma_map_single(&spi->dev, (void *)t->tx_buf, count, + DMA_TO_DEVICE); + if (dma_mapping_error(&spi->dev, t->tx_dma)) { + dev_dbg(sdev, "Unable to DMA map a %d bytes" + " TX buffer\n", count); + return -ENOMEM; + } + temp_count = count; + } else { + /* We need TX clocking for RX transaction */ + t->tx_dma = dma_map_single(&spi->dev, + (void *)davinci_spi->tmp_buf, count + 1, + DMA_TO_DEVICE); + if (dma_mapping_error(&spi->dev, t->tx_dma)) { + dev_dbg(sdev, "Unable to DMA map a %d bytes" + " TX tmp buffer\n", count); + return -ENOMEM; + } + temp_count = count + 1; + } + + edma_set_transfer_params(davinci_spi_dma->dma_tx_channel, + data_type, temp_count, 1, 0, ASYNC); + edma_set_dest(davinci_spi_dma->dma_tx_channel, tx_reg, INCR, W8BIT); + edma_set_src(davinci_spi_dma->dma_tx_channel, t->tx_dma, INCR, W8BIT); + edma_set_src_index(davinci_spi_dma->dma_tx_channel, data_type, 0); + edma_set_dest_index(davinci_spi_dma->dma_tx_channel, 0, 0); + + if (t->rx_buf) { + /* initiate transaction */ + iowrite32(data1_reg_val, davinci_spi->base + SPIDAT1); + + t->rx_dma = dma_map_single(&spi->dev, (void *)t->rx_buf, count, + DMA_FROM_DEVICE); + if (dma_mapping_error(&spi->dev, t->rx_dma)) { + dev_dbg(sdev, "Couldn't DMA map a %d bytes RX buffer\n", + count); + if (t->tx_buf != NULL) + dma_unmap_single(NULL, t->tx_dma, + count, DMA_TO_DEVICE); + return -ENOMEM; + } + edma_set_transfer_params(davinci_spi_dma->dma_rx_channel, + data_type, count, 1, 0, ASYNC); + edma_set_src(davinci_spi_dma->dma_rx_channel, + rx_reg, INCR, W8BIT); + edma_set_dest(davinci_spi_dma->dma_rx_channel, + t->rx_dma, INCR, W8BIT); + edma_set_src_index(davinci_spi_dma->dma_rx_channel, 0, 0); + edma_set_dest_index(davinci_spi_dma->dma_rx_channel, + data_type, 0); + } + + if ((t->tx_buf) || (t->rx_buf)) + edma_start(davinci_spi_dma->dma_tx_channel); + + if (t->rx_buf) + edma_start(davinci_spi_dma->dma_rx_channel); + + if ((t->rx_buf) || (t->tx_buf)) + davinci_spi_set_dma_req(spi, 1); + + if (t->tx_buf) + wait_for_completion_interruptible( + &davinci_spi_dma->dma_tx_completion); + + if (t->rx_buf) + wait_for_completion_interruptible( + &davinci_spi_dma->dma_rx_completion); + + dma_unmap_single(NULL, t->tx_dma, temp_count, DMA_TO_DEVICE); + + if (t->rx_buf) + dma_unmap_single(NULL, t->rx_dma, count, DMA_FROM_DEVICE); + + /* + * Check for bit error, desync error,parity error,timeout error and + * receive overflow errors + */ + int_status = ioread32(davinci_spi->base + SPIFLG); + + ret = davinci_spi_check_error(davinci_spi, int_status); + if (ret != 0) + return ret; + + /* SPI Framework maintains the count only in bytes so convert back */ + davinci_spi->count *= conv; + + return t->len; +} + +/** + * davinci_spi_irq - IRQ handler for DaVinci SPI + * @irq: IRQ number for this SPI Master + * @context_data: structure for SPI Master controller davinci_spi + */ +static irqreturn_t davinci_spi_irq(s32 irq, void *context_data) +{ + struct davinci_spi *davinci_spi = context_data; + u32 int_status, rx_data = 0; + irqreturn_t ret = IRQ_NONE; + + int_status = ioread32(davinci_spi->base + SPIFLG); + + while ((int_status & SPIFLG_RX_INTR_MASK)) { + if (likely(int_status & SPIFLG_RX_INTR_MASK)) { + ret = IRQ_HANDLED; + + rx_data = ioread32(davinci_spi->base + SPIBUF); + davinci_spi->get_rx(rx_data, davinci_spi); + + /* Disable Receive Interrupt */ + iowrite32(~(SPIINT_RX_INTR | SPIINT_TX_INTR), + davinci_spi->base + SPIINT); + } else + (void)davinci_spi_check_error(davinci_spi, int_status); + + int_status = ioread32(davinci_spi->base + SPIFLG); + } + + return ret; +} + +/** + * davinci_spi_probe - probe function for SPI Master Controller + * @pdev: platform_device structure which contains plateform specific data + */ +static int davinci_spi_probe(struct platform_device *pdev) +{ + struct spi_master *master; + struct davinci_spi *davinci_spi; + struct davinci_spi_platform_data *pdata; + struct resource *r, *mem; + resource_size_t dma_rx_chan = SPI_NO_RESOURCE; + resource_size_t dma_tx_chan = SPI_NO_RESOURCE; + resource_size_t dma_eventq = SPI_NO_RESOURCE; + int i = 0, ret = 0; + + pdata = pdev->dev.platform_data; + if (pdata == NULL) { + ret = -ENODEV; + goto err; + } + + master = spi_alloc_master(&pdev->dev, sizeof(struct davinci_spi)); + if (master == NULL) { + ret = -ENOMEM; + goto err; + } + + dev_set_drvdata(&pdev->dev, master); + + davinci_spi = spi_master_get_devdata(master); + if (davinci_spi == NULL) { + ret = -ENOENT; + goto free_master; + } + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (r == NULL) { + ret = -ENOENT; + goto free_master; + } + + davinci_spi->pbase = r->start; + davinci_spi->region_size = resource_size(r); + davinci_spi->pdata = pdata; + + mem = request_mem_region(r->start, davinci_spi->region_size, + pdev->name); + if (mem == NULL) { + ret = -EBUSY; + goto free_master; + } + + davinci_spi->base = (struct davinci_spi_reg __iomem *) + ioremap(r->start, davinci_spi->region_size); + if (davinci_spi->base == NULL) { + ret = -ENOMEM; + goto release_region; + } + + davinci_spi->irq = platform_get_irq(pdev, 0); + if (davinci_spi->irq <= 0) { + ret = -EINVAL; + goto unmap_io; + } + + ret = request_irq(davinci_spi->irq, davinci_spi_irq, IRQF_DISABLED, + dev_name(&pdev->dev), davinci_spi); + if (ret) + goto unmap_io; + + /* Allocate tmp_buf for tx_buf */ + davinci_spi->tmp_buf = kzalloc(SPI_BUFSIZ, GFP_KERNEL); + if (davinci_spi->tmp_buf == NULL) { + ret = -ENOMEM; + goto irq_free; + } + + davinci_spi->bitbang.master = spi_master_get(master); + if (davinci_spi->bitbang.master == NULL) { + ret = -ENODEV; + goto free_tmp_buf; + } + + davinci_spi->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(davinci_spi->clk)) { + ret = -ENODEV; + goto put_master; + } + clk_enable(davinci_spi->clk); + + + master->bus_num = pdev->id; + master->num_chipselect = pdata->num_chipselect; + master->setup = davinci_spi_setup; + master->cleanup = davinci_spi_cleanup; + + davinci_spi->bitbang.chipselect = davinci_spi_chipselect; + davinci_spi->bitbang.setup_transfer = davinci_spi_setup_transfer; + + davinci_spi->version = pdata->version; + use_dma = pdata->use_dma; + + davinci_spi->bitbang.flags = SPI_NO_CS | SPI_LSB_FIRST | SPI_LOOP; + if (davinci_spi->version == SPI_VERSION_2) + davinci_spi->bitbang.flags |= SPI_READY; + + if (use_dma) { + r = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (r) + dma_rx_chan = r->start; + r = platform_get_resource(pdev, IORESOURCE_DMA, 1); + if (r) + dma_tx_chan = r->start; + r = platform_get_resource(pdev, IORESOURCE_DMA, 2); + if (r) + dma_eventq = r->start; + } + + if (!use_dma || + dma_rx_chan == SPI_NO_RESOURCE || + dma_tx_chan == SPI_NO_RESOURCE || + dma_eventq == SPI_NO_RESOURCE) { + davinci_spi->bitbang.txrx_bufs = davinci_spi_bufs_pio; + use_dma = 0; + } else { + davinci_spi->bitbang.txrx_bufs = davinci_spi_bufs_dma; + davinci_spi->dma_channels = kzalloc(master->num_chipselect + * sizeof(struct davinci_spi_dma), GFP_KERNEL); + if (davinci_spi->dma_channels == NULL) { + ret = -ENOMEM; + goto free_clk; + } + + for (i = 0; i < master->num_chipselect; i++) { + davinci_spi->dma_channels[i].dma_rx_channel = -1; + davinci_spi->dma_channels[i].dma_rx_sync_dev = + dma_rx_chan; + davinci_spi->dma_channels[i].dma_tx_channel = -1; + davinci_spi->dma_channels[i].dma_tx_sync_dev = + dma_tx_chan; + davinci_spi->dma_channels[i].eventq = dma_eventq; + } + dev_info(&pdev->dev, "DaVinci SPI driver in EDMA mode\n" + "Using RX channel = %d , TX channel = %d and " + "event queue = %d", dma_rx_chan, dma_tx_chan, + dma_eventq); + } + + davinci_spi->get_rx = davinci_spi_rx_buf_u8; + davinci_spi->get_tx = davinci_spi_tx_buf_u8; + + init_completion(&davinci_spi->done); + + /* Reset In/OUT SPI module */ + iowrite32(0, davinci_spi->base + SPIGCR0); + udelay(100); + iowrite32(1, davinci_spi->base + SPIGCR0); + + /* Clock internal */ + if (davinci_spi->pdata->clk_internal) + set_io_bits(davinci_spi->base + SPIGCR1, + SPIGCR1_CLKMOD_MASK); + else + clear_io_bits(davinci_spi->base + SPIGCR1, + SPIGCR1_CLKMOD_MASK); + + /* master mode default */ + set_io_bits(davinci_spi->base + SPIGCR1, SPIGCR1_MASTER_MASK); + + if (davinci_spi->pdata->intr_level) + iowrite32(SPI_INTLVL_1, davinci_spi->base + SPILVL); + else + iowrite32(SPI_INTLVL_0, davinci_spi->base + SPILVL); + + ret = spi_bitbang_start(&davinci_spi->bitbang); + if (ret) + goto free_clk; + + dev_info(&pdev->dev, "Controller at 0x%p \n", davinci_spi->base); + + if (!pdata->poll_mode) + dev_info(&pdev->dev, "Operating in interrupt mode" + " using IRQ %d\n", davinci_spi->irq); + + return ret; + +free_clk: + clk_disable(davinci_spi->clk); + clk_put(davinci_spi->clk); +put_master: + spi_master_put(master); +free_tmp_buf: + kfree(davinci_spi->tmp_buf); +irq_free: + free_irq(davinci_spi->irq, davinci_spi); +unmap_io: + iounmap(davinci_spi->base); +release_region: + release_mem_region(davinci_spi->pbase, davinci_spi->region_size); +free_master: + kfree(master); +err: + return ret; +} + +/** + * davinci_spi_remove - remove function for SPI Master Controller + * @pdev: platform_device structure which contains plateform specific data + * + * This function will do the reverse action of davinci_spi_probe function + * It will free the IRQ and SPI controller's memory region. + * It will also call spi_bitbang_stop to destroy the work queue which was + * created by spi_bitbang_start. + */ +static int __exit davinci_spi_remove(struct platform_device *pdev) +{ + struct davinci_spi *davinci_spi; + struct spi_master *master; + + master = dev_get_drvdata(&pdev->dev); + davinci_spi = spi_master_get_devdata(master); + + spi_bitbang_stop(&davinci_spi->bitbang); + + clk_disable(davinci_spi->clk); + clk_put(davinci_spi->clk); + spi_master_put(master); + kfree(davinci_spi->tmp_buf); + free_irq(davinci_spi->irq, davinci_spi); + iounmap(davinci_spi->base); + release_mem_region(davinci_spi->pbase, davinci_spi->region_size); + + return 0; +} + +static struct platform_driver davinci_spi_driver = { + .driver.name = "spi_davinci", + .remove = __exit_p(davinci_spi_remove), +}; + +static int __init davinci_spi_init(void) +{ + return platform_driver_probe(&davinci_spi_driver, davinci_spi_probe); +} +module_init(davinci_spi_init); + +static void __exit davinci_spi_exit(void) +{ + platform_driver_unregister(&davinci_spi_driver); +} +module_exit(davinci_spi_exit); + +MODULE_DESCRIPTION("TI DaVinci SPI Master Controller Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/dw_spi.c b/drivers/spi/dw_spi.c index 31620fa..8ed38f1 100644 --- a/drivers/spi/dw_spi.c +++ b/drivers/spi/dw_spi.c @@ -152,6 +152,7 @@ static void mrst_spi_debugfs_remove(struct dw_spi *dws) #else static inline int mrst_spi_debugfs_init(struct dw_spi *dws) { + return 0; } static inline void mrst_spi_debugfs_remove(struct dw_spi *dws) @@ -161,14 +162,14 @@ static inline void mrst_spi_debugfs_remove(struct dw_spi *dws) static void wait_till_not_busy(struct dw_spi *dws) { - unsigned long end = jiffies + usecs_to_jiffies(1000); + unsigned long end = jiffies + 1 + usecs_to_jiffies(1000); while (time_before(jiffies, end)) { if (!(dw_readw(dws, sr) & SR_BUSY)) return; } dev_err(&dws->master->dev, - "DW SPI: Stutus keeps busy for 1000us after a read/write!\n"); + "DW SPI: Status keeps busy for 1000us after a read/write!\n"); } static void flush(struct dw_spi *dws) @@ -358,6 +359,8 @@ static void transfer_complete(struct dw_spi *dws) static irqreturn_t interrupt_transfer(struct dw_spi *dws) { u16 irq_status, irq_mask = 0x3f; + u32 int_level = dws->fifo_len / 2; + u32 left; irq_status = dw_readw(dws, isr) & irq_mask; /* Error handling */ @@ -369,22 +372,23 @@ static irqreturn_t interrupt_transfer(struct dw_spi *dws) return IRQ_HANDLED; } - /* INT comes from tx */ - if (dws->tx && (irq_status & SPI_INT_TXEI)) { - while (dws->tx < dws->tx_end) + if (irq_status & SPI_INT_TXEI) { + spi_mask_intr(dws, SPI_INT_TXEI); + + left = (dws->tx_end - dws->tx) / dws->n_bytes; + left = (left > int_level) ? int_level : left; + + while (left--) dws->write(dws); + dws->read(dws); - if (dws->tx == dws->tx_end) { - spi_mask_intr(dws, SPI_INT_TXEI); + /* Re-enable the IRQ if there is still data left to tx */ + if (dws->tx_end > dws->tx) + spi_umask_intr(dws, SPI_INT_TXEI); + else transfer_complete(dws); - } } - /* INT comes from rx */ - if (dws->rx && (irq_status & SPI_INT_RXFI)) { - if (dws->read(dws)) - transfer_complete(dws); - } return IRQ_HANDLED; } @@ -404,12 +408,9 @@ static irqreturn_t dw_spi_irq(int irq, void *dev_id) /* Must be called inside pump_transfers() */ static void poll_transfer(struct dw_spi *dws) { - if (dws->tx) { - while (dws->write(dws)) - dws->read(dws); - } + while (dws->write(dws)) + dws->read(dws); - dws->read(dws); transfer_complete(dws); } @@ -428,6 +429,7 @@ static void pump_transfers(unsigned long data) u8 bits = 0; u8 imask = 0; u8 cs_change = 0; + u16 txint_level = 0; u16 clk_div = 0; u32 speed = 0; u32 cr0 = 0; @@ -438,6 +440,9 @@ static void pump_transfers(unsigned long data) chip = dws->cur_chip; spi = message->spi; + if (unlikely(!chip->clk_div)) + chip->clk_div = dws->max_freq / chip->speed_hz; + if (message->state == ERROR_STATE) { message->status = -EIO; goto early_exit; @@ -492,7 +497,7 @@ static void pump_transfers(unsigned long data) /* clk_div doesn't support odd number */ clk_div = dws->max_freq / speed; - clk_div = (clk_div >> 1) << 1; + clk_div = (clk_div + 1) & 0xfffe; chip->speed_hz = speed; chip->clk_div = clk_div; @@ -532,14 +537,35 @@ static void pump_transfers(unsigned long data) } message->state = RUNNING_STATE; + /* + * Adjust transfer mode if necessary. Requires platform dependent + * chipselect mechanism. + */ + if (dws->cs_control) { + if (dws->rx && dws->tx) + chip->tmode = 0x00; + else if (dws->rx) + chip->tmode = 0x02; + else + chip->tmode = 0x01; + + cr0 &= ~(0x3 << SPI_MODE_OFFSET); + cr0 |= (chip->tmode << SPI_TMOD_OFFSET); + } + /* Check if current transfer is a DMA transaction */ dws->dma_mapped = map_dma_buffers(dws); + /* + * Interrupt mode + * we only need set the TXEI IRQ, as TX/RX always happen syncronizely + */ if (!dws->dma_mapped && !chip->poll_mode) { - if (dws->rx) - imask |= SPI_INT_RXFI; - if (dws->tx) - imask |= SPI_INT_TXEI; + int templen = dws->len / dws->n_bytes; + txint_level = dws->fifo_len / 2; + txint_level = (templen > txint_level) ? txint_level : templen; + + imask |= SPI_INT_TXEI; dws->transfer_handler = interrupt_transfer; } @@ -549,21 +575,23 @@ static void pump_transfers(unsigned long data) * 2. clk_div is changed * 3. control value changes */ - if (dw_readw(dws, ctrl0) != cr0 || cs_change || clk_div) { + if (dw_readw(dws, ctrl0) != cr0 || cs_change || clk_div || imask) { spi_enable_chip(dws, 0); if (dw_readw(dws, ctrl0) != cr0) dw_writew(dws, ctrl0, cr0); + spi_set_clk(dws, clk_div ? clk_div : chip->clk_div); + spi_chip_sel(dws, spi->chip_select); + /* Set the interrupt mask, for poll mode just diable all int */ spi_mask_intr(dws, 0xff); - if (!chip->poll_mode) + if (imask) spi_umask_intr(dws, imask); + if (txint_level) + dw_writew(dws, txfltr, txint_level); - spi_set_clk(dws, clk_div ? clk_div : chip->clk_div); - spi_chip_sel(dws, spi->chip_select); spi_enable_chip(dws, 1); - if (cs_change) dws->prev_chip = chip; } @@ -712,11 +740,11 @@ static int dw_spi_setup(struct spi_device *spi) } chip->bits_per_word = spi->bits_per_word; + if (!spi->max_speed_hz) { + dev_err(&spi->dev, "No max speed HZ parameter\n"); + return -EINVAL; + } chip->speed_hz = spi->max_speed_hz; - if (chip->speed_hz) - chip->clk_div = 25000000 / chip->speed_hz; - else - chip->clk_div = 8; /* default value */ chip->tmode = 0; /* Tx & Rx */ /* Default SPI mode is SCPOL = 0, SCPH = 0 */ @@ -735,7 +763,7 @@ static void dw_spi_cleanup(struct spi_device *spi) kfree(chip); } -static int __init init_queue(struct dw_spi *dws) +static int __devinit init_queue(struct dw_spi *dws) { INIT_LIST_HEAD(&dws->queue); spin_lock_init(&dws->lock); @@ -817,6 +845,22 @@ static void spi_hw_init(struct dw_spi *dws) spi_mask_intr(dws, 0xff); spi_enable_chip(dws, 1); flush(dws); + + /* + * Try to detect the FIFO depth if not set by interface driver, + * the depth could be from 2 to 256 from HW spec + */ + if (!dws->fifo_len) { + u32 fifo; + for (fifo = 2; fifo <= 257; fifo++) { + dw_writew(dws, txfltr, fifo); + if (fifo != dw_readw(dws, txfltr)) + break; + } + + dws->fifo_len = (fifo == 257) ? 0 : fifo; + dw_writew(dws, txfltr, 0); + } } int __devinit dw_spi_add_host(struct dw_spi *dws) @@ -913,6 +957,7 @@ void __devexit dw_spi_remove_host(struct dw_spi *dws) /* Disconnect from the SPI framework */ spi_unregister_master(dws->master); } +EXPORT_SYMBOL(dw_spi_remove_host); int dw_spi_suspend_host(struct dw_spi *dws) { diff --git a/drivers/spi/dw_spi_mmio.c b/drivers/spi/dw_spi_mmio.c new file mode 100644 index 0000000..e35b45a --- /dev/null +++ b/drivers/spi/dw_spi_mmio.c @@ -0,0 +1,147 @@ +/* + * dw_spi_mmio.c - Memory-mapped interface driver for DW SPI Core + * + * Copyright (c) 2010, Octasic semiconductor. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + */ + +#include <linux/clk.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/spi/dw_spi.h> +#include <linux/spi/spi.h> + +#define DRIVER_NAME "dw_spi_mmio" + +struct dw_spi_mmio { + struct dw_spi dws; + struct clk *clk; +}; + +static int __devinit dw_spi_mmio_probe(struct platform_device *pdev) +{ + struct dw_spi_mmio *dwsmmio; + struct dw_spi *dws; + struct resource *mem, *ioarea; + int ret; + + dwsmmio = kzalloc(sizeof(struct dw_spi_mmio), GFP_KERNEL); + if (!dwsmmio) { + ret = -ENOMEM; + goto err_end; + } + + dws = &dwsmmio->dws; + + /* Get basic io resource and map it */ + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem) { + dev_err(&pdev->dev, "no mem resource?\n"); + ret = -EINVAL; + goto err_kfree; + } + + ioarea = request_mem_region(mem->start, resource_size(mem), + pdev->name); + if (!ioarea) { + dev_err(&pdev->dev, "SPI region already claimed\n"); + ret = -EBUSY; + goto err_kfree; + } + + dws->regs = ioremap_nocache(mem->start, resource_size(mem)); + if (!dws->regs) { + dev_err(&pdev->dev, "SPI region already mapped\n"); + ret = -ENOMEM; + goto err_release_reg; + } + + dws->irq = platform_get_irq(pdev, 0); + if (dws->irq < 0) { + dev_err(&pdev->dev, "no irq resource?\n"); + ret = dws->irq; /* -ENXIO */ + goto err_unmap; + } + + dwsmmio->clk = clk_get(&pdev->dev, NULL); + if (!dwsmmio->clk) { + ret = -ENODEV; + goto err_irq; + } + clk_enable(dwsmmio->clk); + + dws->parent_dev = &pdev->dev; + dws->bus_num = 0; + dws->num_cs = 4; + dws->max_freq = clk_get_rate(dwsmmio->clk); + + ret = dw_spi_add_host(dws); + if (ret) + goto err_clk; + + platform_set_drvdata(pdev, dwsmmio); + return 0; + +err_clk: + clk_disable(dwsmmio->clk); + clk_put(dwsmmio->clk); + dwsmmio->clk = NULL; +err_irq: + free_irq(dws->irq, dws); +err_unmap: + iounmap(dws->regs); +err_release_reg: + release_mem_region(mem->start, resource_size(mem)); +err_kfree: + kfree(dwsmmio); +err_end: + return ret; +} + +static int __devexit dw_spi_mmio_remove(struct platform_device *pdev) +{ + struct dw_spi_mmio *dwsmmio = platform_get_drvdata(pdev); + struct resource *mem; + + platform_set_drvdata(pdev, NULL); + + clk_disable(dwsmmio->clk); + clk_put(dwsmmio->clk); + dwsmmio->clk = NULL; + + free_irq(dwsmmio->dws.irq, &dwsmmio->dws); + dw_spi_remove_host(&dwsmmio->dws); + iounmap(dwsmmio->dws.regs); + kfree(dwsmmio); + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(mem->start, resource_size(mem)); + return 0; +} + +static struct platform_driver dw_spi_mmio_driver = { + .remove = __devexit_p(dw_spi_mmio_remove), + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, +}; + +static int __init dw_spi_mmio_init(void) +{ + return platform_driver_probe(&dw_spi_mmio_driver, dw_spi_mmio_probe); +} +module_init(dw_spi_mmio_init); + +static void __exit dw_spi_mmio_exit(void) +{ + platform_driver_unregister(&dw_spi_mmio_driver); +} +module_exit(dw_spi_mmio_exit); + +MODULE_AUTHOR("Jean-Hugues Deschenes <jean-hugues.deschenes@octasic.com>"); +MODULE_DESCRIPTION("Memory-mapped I/O interface driver for DW SPI Core"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/spi/dw_spi_pci.c b/drivers/spi/dw_spi_pci.c index 34ba691..1f0735f 100644 --- a/drivers/spi/dw_spi_pci.c +++ b/drivers/spi/dw_spi_pci.c @@ -73,6 +73,7 @@ static int __devinit spi_pci_probe(struct pci_dev *pdev, dws->num_cs = 4; dws->max_freq = 25000000; /* for Moorestwon */ dws->irq = pdev->irq; + dws->fifo_len = 40; /* FIFO has 40 words buffer */ ret = dw_spi_add_host(dws); if (ret) @@ -98,6 +99,7 @@ static void __devexit spi_pci_remove(struct pci_dev *pdev) struct dw_spi_pci *dwpci = pci_get_drvdata(pdev); pci_set_drvdata(pdev, NULL); + dw_spi_remove_host(&dwpci->dws); iounmap(dwpci->dws.regs); pci_release_region(pdev, 0); kfree(dwpci); diff --git a/drivers/spi/mpc52xx_psc_spi.c b/drivers/spi/mpc52xx_psc_spi.c index f50c81d..0474786 100644 --- a/drivers/spi/mpc52xx_psc_spi.c +++ b/drivers/spi/mpc52xx_psc_spi.c @@ -503,7 +503,7 @@ static int __exit mpc52xx_psc_spi_of_remove(struct of_device *op) return mpc52xx_psc_spi_do_remove(&op->dev); } -static struct of_device_id mpc52xx_psc_spi_of_match[] = { +static const struct of_device_id mpc52xx_psc_spi_of_match[] = { { .compatible = "fsl,mpc5200-psc-spi", }, { .compatible = "mpc5200-psc-spi", }, /* old */ {} diff --git a/drivers/spi/mpc52xx_spi.c b/drivers/spi/mpc52xx_spi.c index 45bfe64..6eab465 100644 --- a/drivers/spi/mpc52xx_spi.c +++ b/drivers/spi/mpc52xx_spi.c @@ -550,7 +550,7 @@ static int __devexit mpc52xx_spi_remove(struct of_device *op) return 0; } -static struct of_device_id mpc52xx_spi_match[] __devinitdata = { +static const struct of_device_id mpc52xx_spi_match[] __devinitconst = { { .compatible = "fsl,mpc5200-spi", }, {} }; diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c index 1893f1e..0ddbbe4 100644 --- a/drivers/spi/spi_imx.c +++ b/drivers/spi/spi_imx.c @@ -469,7 +469,7 @@ static int spi_imx_setup(struct spi_device *spi) struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master); int gpio = spi_imx->chipselect[spi->chip_select]; - pr_debug("%s: mode %d, %u bpw, %d hz\n", __func__, + dev_dbg(&spi->dev, "%s: mode %d, %u bpw, %d hz\n", __func__, spi->mode, spi->bits_per_word, spi->max_speed_hz); if (gpio >= 0) diff --git a/drivers/spi/spi_mpc8xxx.c b/drivers/spi/spi_mpc8xxx.c index 1fb2a6e..4f0cc9d 100644 --- a/drivers/spi/spi_mpc8xxx.c +++ b/drivers/spi/spi_mpc8xxx.c @@ -365,7 +365,7 @@ int mpc8xxx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t) if ((mpc8xxx_spi->spibrg / hz) > 64) { cs->hw_mode |= SPMODE_DIV16; - pm = mpc8xxx_spi->spibrg / (hz * 64); + pm = (mpc8xxx_spi->spibrg - 1) / (hz * 64) + 1; WARN_ONCE(pm > 16, "%s: Requested speed is too low: %d Hz. " "Will use %d Hz instead.\n", dev_name(&spi->dev), @@ -373,7 +373,7 @@ int mpc8xxx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t) if (pm > 16) pm = 16; } else - pm = mpc8xxx_spi->spibrg / (hz * 4); + pm = (mpc8xxx_spi->spibrg - 1) / (hz * 4) + 1; if (pm) pm--; @@ -1328,7 +1328,7 @@ static struct of_platform_driver of_mpc8xxx_spi_driver = { static int __devinit plat_mpc8xxx_spi_probe(struct platform_device *pdev) { struct resource *mem; - unsigned int irq; + int irq; struct spi_master *master; if (!pdev->dev.platform_data) @@ -1339,7 +1339,7 @@ static int __devinit plat_mpc8xxx_spi_probe(struct platform_device *pdev) return -EINVAL; irq = platform_get_irq(pdev, 0); - if (!irq) + if (irq <= 0) return -EINVAL; master = mpc8xxx_spi_probe(&pdev->dev, mem, irq); diff --git a/drivers/spi/spi_ppc4xx.c b/drivers/spi/spi_ppc4xx.c index 140a18d..6d8d402 100644 --- a/drivers/spi/spi_ppc4xx.c +++ b/drivers/spi/spi_ppc4xx.c @@ -578,7 +578,7 @@ static int __exit spi_ppc4xx_of_remove(struct of_device *op) return 0; } -static struct of_device_id spi_ppc4xx_of_match[] = { +static const struct of_device_id spi_ppc4xx_of_match[] = { { .compatible = "ibm,ppc4xx-spi", }, {}, }; diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c index 88a456d..9736581 100644 --- a/drivers/spi/spi_s3c64xx.c +++ b/drivers/spi/spi_s3c64xx.c @@ -28,7 +28,7 @@ #include <linux/spi/spi.h> #include <mach/dma.h> -#include <plat/spi.h> +#include <plat/s3c64xx-spi.h> /* Registers and bit-fields */ @@ -137,6 +137,7 @@ /** * struct s3c64xx_spi_driver_data - Runtime info holder for SPI driver. * @clk: Pointer to the spi clock. + * @src_clk: Pointer to the clock used to generate SPI signals. * @master: Pointer to the SPI Protocol master. * @workqueue: Work queue for the SPI xfer requests. * @cntrlr_info: Platform specific data for the controller this driver manages. @@ -157,10 +158,11 @@ struct s3c64xx_spi_driver_data { void __iomem *regs; struct clk *clk; + struct clk *src_clk; struct platform_device *pdev; struct spi_master *master; struct workqueue_struct *workqueue; - struct s3c64xx_spi_cntrlr_info *cntrlr_info; + struct s3c64xx_spi_info *cntrlr_info; struct spi_device *tgl_spi; struct work_struct work; struct list_head queue; @@ -180,7 +182,7 @@ static struct s3c2410_dma_client s3c64xx_spi_dma_client = { static void flush_fifo(struct s3c64xx_spi_driver_data *sdd) { - struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; + struct s3c64xx_spi_info *sci = sdd->cntrlr_info; void __iomem *regs = sdd->regs; unsigned long loops; u32 val; @@ -225,7 +227,7 @@ static void enable_datapath(struct s3c64xx_spi_driver_data *sdd, struct spi_device *spi, struct spi_transfer *xfer, int dma_mode) { - struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; + struct s3c64xx_spi_info *sci = sdd->cntrlr_info; void __iomem *regs = sdd->regs; u32 modecfg, chcfg; @@ -298,19 +300,20 @@ static inline void enable_cs(struct s3c64xx_spi_driver_data *sdd, if (sdd->tgl_spi != spi) { /* if last mssg on diff device */ /* Deselect the last toggled device */ cs = sdd->tgl_spi->controller_data; - cs->set_level(spi->mode & SPI_CS_HIGH ? 0 : 1); + cs->set_level(cs->line, + spi->mode & SPI_CS_HIGH ? 0 : 1); } sdd->tgl_spi = NULL; } cs = spi->controller_data; - cs->set_level(spi->mode & SPI_CS_HIGH ? 1 : 0); + cs->set_level(cs->line, spi->mode & SPI_CS_HIGH ? 1 : 0); } static int wait_for_xfer(struct s3c64xx_spi_driver_data *sdd, struct spi_transfer *xfer, int dma_mode) { - struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; + struct s3c64xx_spi_info *sci = sdd->cntrlr_info; void __iomem *regs = sdd->regs; unsigned long val; int ms; @@ -384,12 +387,11 @@ static inline void disable_cs(struct s3c64xx_spi_driver_data *sdd, if (sdd->tgl_spi == spi) sdd->tgl_spi = NULL; - cs->set_level(spi->mode & SPI_CS_HIGH ? 0 : 1); + cs->set_level(cs->line, spi->mode & SPI_CS_HIGH ? 0 : 1); } static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd) { - struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; void __iomem *regs = sdd->regs; u32 val; @@ -435,7 +437,7 @@ static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd) /* Configure Clock */ val = readl(regs + S3C64XX_SPI_CLK_CFG); val &= ~S3C64XX_SPI_PSR_MASK; - val |= ((clk_get_rate(sci->src_clk) / sdd->cur_speed / 2 - 1) + val |= ((clk_get_rate(sdd->src_clk) / sdd->cur_speed / 2 - 1) & S3C64XX_SPI_PSR_MASK); writel(val, regs + S3C64XX_SPI_CLK_CFG); @@ -558,7 +560,7 @@ static void s3c64xx_spi_unmap_mssg(struct s3c64xx_spi_driver_data *sdd, static void handle_msg(struct s3c64xx_spi_driver_data *sdd, struct spi_message *msg) { - struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; + struct s3c64xx_spi_info *sci = sdd->cntrlr_info; struct spi_device *spi = msg->spi; struct s3c64xx_spi_csinfo *cs = spi->controller_data; struct spi_transfer *xfer; @@ -632,8 +634,8 @@ static void handle_msg(struct s3c64xx_spi_driver_data *sdd, S3C64XX_SPI_DEACT(sdd); if (status) { - dev_err(&spi->dev, "I/O Error: \ - rx-%d tx-%d res:rx-%c tx-%c len-%d\n", + dev_err(&spi->dev, "I/O Error: " + "rx-%d tx-%d res:rx-%c tx-%c len-%d\n", xfer->rx_buf ? 1 : 0, xfer->tx_buf ? 1 : 0, (sdd->state & RXBUSY) ? 'f' : 'p', (sdd->state & TXBUSY) ? 'f' : 'p', @@ -786,7 +788,7 @@ static int s3c64xx_spi_setup(struct spi_device *spi) { struct s3c64xx_spi_csinfo *cs = spi->controller_data; struct s3c64xx_spi_driver_data *sdd; - struct s3c64xx_spi_cntrlr_info *sci; + struct s3c64xx_spi_info *sci; struct spi_message *msg; u32 psr, speed; unsigned long flags; @@ -831,17 +833,17 @@ static int s3c64xx_spi_setup(struct spi_device *spi) } /* Check if we can provide the requested rate */ - speed = clk_get_rate(sci->src_clk) / 2 / (0 + 1); /* Max possible */ + speed = clk_get_rate(sdd->src_clk) / 2 / (0 + 1); /* Max possible */ if (spi->max_speed_hz > speed) spi->max_speed_hz = speed; - psr = clk_get_rate(sci->src_clk) / 2 / spi->max_speed_hz - 1; + psr = clk_get_rate(sdd->src_clk) / 2 / spi->max_speed_hz - 1; psr &= S3C64XX_SPI_PSR_MASK; if (psr == S3C64XX_SPI_PSR_MASK) psr--; - speed = clk_get_rate(sci->src_clk) / 2 / (psr + 1); + speed = clk_get_rate(sdd->src_clk) / 2 / (psr + 1); if (spi->max_speed_hz < speed) { if (psr+1 < S3C64XX_SPI_PSR_MASK) { psr++; @@ -851,7 +853,7 @@ static int s3c64xx_spi_setup(struct spi_device *spi) } } - speed = clk_get_rate(sci->src_clk) / 2 / (psr + 1); + speed = clk_get_rate(sdd->src_clk) / 2 / (psr + 1); if (spi->max_speed_hz >= speed) spi->max_speed_hz = speed; else @@ -867,7 +869,7 @@ setup_exit: static void s3c64xx_spi_hwinit(struct s3c64xx_spi_driver_data *sdd, int channel) { - struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; + struct s3c64xx_spi_info *sci = sdd->cntrlr_info; void __iomem *regs = sdd->regs; unsigned int val; @@ -902,7 +904,7 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev) { struct resource *mem_res, *dmatx_res, *dmarx_res; struct s3c64xx_spi_driver_data *sdd; - struct s3c64xx_spi_cntrlr_info *sci; + struct s3c64xx_spi_info *sci; struct spi_master *master; int ret; @@ -1000,18 +1002,15 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev) goto err4; } - if (sci->src_clk_nr == S3C64XX_SPI_SRCCLK_PCLK) - sci->src_clk = sdd->clk; - else - sci->src_clk = clk_get(&pdev->dev, sci->src_clk_name); - if (IS_ERR(sci->src_clk)) { + sdd->src_clk = clk_get(&pdev->dev, sci->src_clk_name); + if (IS_ERR(sdd->src_clk)) { dev_err(&pdev->dev, "Unable to acquire clock '%s'\n", sci->src_clk_name); - ret = PTR_ERR(sci->src_clk); + ret = PTR_ERR(sdd->src_clk); goto err5; } - if (sci->src_clk != sdd->clk && clk_enable(sci->src_clk)) { + if (clk_enable(sdd->src_clk)) { dev_err(&pdev->dev, "Couldn't enable clock '%s'\n", sci->src_clk_name); ret = -EBUSY; @@ -1040,11 +1039,10 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev) goto err8; } - dev_dbg(&pdev->dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d \ - with %d Slaves attached\n", + dev_dbg(&pdev->dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d " + "with %d Slaves attached\n", pdev->id, master->num_chipselect); - dev_dbg(&pdev->dev, "\tIOmem=[0x%x-0x%x]\ - \tDMA=[Rx-%d, Tx-%d]\n", + dev_dbg(&pdev->dev, "\tIOmem=[0x%x-0x%x]\tDMA=[Rx-%d, Tx-%d]\n", mem_res->end, mem_res->start, sdd->rx_dmach, sdd->tx_dmach); @@ -1053,11 +1051,9 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev) err8: destroy_workqueue(sdd->workqueue); err7: - if (sci->src_clk != sdd->clk) - clk_disable(sci->src_clk); + clk_disable(sdd->src_clk); err6: - if (sci->src_clk != sdd->clk) - clk_put(sci->src_clk); + clk_put(sdd->src_clk); err5: clk_disable(sdd->clk); err4: @@ -1078,7 +1074,6 @@ static int s3c64xx_spi_remove(struct platform_device *pdev) { struct spi_master *master = spi_master_get(platform_get_drvdata(pdev)); struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master); - struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; struct resource *mem_res; unsigned long flags; @@ -1093,11 +1088,8 @@ static int s3c64xx_spi_remove(struct platform_device *pdev) destroy_workqueue(sdd->workqueue); - if (sci->src_clk != sdd->clk) - clk_disable(sci->src_clk); - - if (sci->src_clk != sdd->clk) - clk_put(sci->src_clk); + clk_disable(sdd->src_clk); + clk_put(sdd->src_clk); clk_disable(sdd->clk); clk_put(sdd->clk); @@ -1105,7 +1097,8 @@ static int s3c64xx_spi_remove(struct platform_device *pdev) iounmap((void *) sdd->regs); mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(mem_res->start, resource_size(mem_res)); + if (mem_res != NULL) + release_mem_region(mem_res->start, resource_size(mem_res)); platform_set_drvdata(pdev, NULL); spi_master_put(master); @@ -1118,8 +1111,6 @@ static int s3c64xx_spi_suspend(struct platform_device *pdev, pm_message_t state) { struct spi_master *master = spi_master_get(platform_get_drvdata(pdev)); struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master); - struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; - struct s3c64xx_spi_csinfo *cs; unsigned long flags; spin_lock_irqsave(&sdd->lock, flags); @@ -1130,9 +1121,7 @@ static int s3c64xx_spi_suspend(struct platform_device *pdev, pm_message_t state) msleep(10); /* Disable the clock */ - if (sci->src_clk != sdd->clk) - clk_disable(sci->src_clk); - + clk_disable(sdd->src_clk); clk_disable(sdd->clk); sdd->cur_speed = 0; /* Output Clock is stopped */ @@ -1144,15 +1133,13 @@ static int s3c64xx_spi_resume(struct platform_device *pdev) { struct spi_master *master = spi_master_get(platform_get_drvdata(pdev)); struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master); - struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; + struct s3c64xx_spi_info *sci = sdd->cntrlr_info; unsigned long flags; sci->cfg_gpio(pdev); /* Enable the clock */ - if (sci->src_clk != sdd->clk) - clk_enable(sci->src_clk); - + clk_enable(sdd->src_clk); clk_enable(sdd->clk); s3c64xx_spi_hwinit(sdd, pdev->id); diff --git a/drivers/spi/spi_sh_msiof.c b/drivers/spi/spi_sh_msiof.c index 30973ec..d93b667 100644 --- a/drivers/spi/spi_sh_msiof.c +++ b/drivers/spi/spi_sh_msiof.c @@ -20,12 +20,12 @@ #include <linux/bitmap.h> #include <linux/clk.h> #include <linux/io.h> +#include <linux/err.h> #include <linux/spi/spi.h> #include <linux/spi/spi_bitbang.h> #include <linux/spi/sh_msiof.h> -#include <asm/spi.h> #include <asm/unaligned.h> struct sh_msiof_spi_priv { diff --git a/drivers/spi/spi_stmp.c b/drivers/spi/spi_stmp.c index 2552bb3..fadff76 100644 --- a/drivers/spi/spi_stmp.c +++ b/drivers/spi/spi_stmp.c @@ -76,7 +76,7 @@ struct stmp_spi { break; \ } \ cpu_relax(); \ - } while (time_before(end_jiffies, jiffies)); \ + } while (time_before(jiffies, end_jiffies)); \ succeeded; \ }) diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c index 9f38637..1b47363 100644 --- a/drivers/spi/xilinx_spi.c +++ b/drivers/spi/xilinx_spi.c @@ -93,6 +93,26 @@ struct xilinx_spi { void (*rx_fn) (struct xilinx_spi *); }; +static void xspi_write32(u32 val, void __iomem *addr) +{ + iowrite32(val, addr); +} + +static unsigned int xspi_read32(void __iomem *addr) +{ + return ioread32(addr); +} + +static void xspi_write32_be(u32 val, void __iomem *addr) +{ + iowrite32be(val, addr); +} + +static unsigned int xspi_read32_be(void __iomem *addr) +{ + return ioread32be(addr); +} + static void xspi_tx8(struct xilinx_spi *xspi) { xspi->write_fn(*xspi->tx_ptr, xspi->regs + XSPI_TXD_OFFSET); @@ -374,11 +394,11 @@ struct spi_master *xilinx_spi_init(struct device *dev, struct resource *mem, xspi->mem = *mem; xspi->irq = irq; if (pdata->little_endian) { - xspi->read_fn = ioread32; - xspi->write_fn = iowrite32; + xspi->read_fn = xspi_read32; + xspi->write_fn = xspi_write32; } else { - xspi->read_fn = ioread32be; - xspi->write_fn = iowrite32be; + xspi->read_fn = xspi_read32_be; + xspi->write_fn = xspi_write32_be; } xspi->bits_per_word = pdata->bits_per_word; if (xspi->bits_per_word == 8) { diff --git a/drivers/spi/xilinx_spi_of.c b/drivers/spi/xilinx_spi_of.c index 71dc3ad..ed34a8d 100644 --- a/drivers/spi/xilinx_spi_of.c +++ b/drivers/spi/xilinx_spi_of.c @@ -99,7 +99,7 @@ static int __exit xilinx_spi_of_remove(struct of_device *op) return xilinx_spi_remove(op); } -static struct of_device_id xilinx_spi_of_match[] = { +static const struct of_device_id xilinx_spi_of_match[] = { { .compatible = "xlnx,xps-spi-2.00.a", }, { .compatible = "xlnx,xps-spi-2.00.b", }, {} diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c index 5681ebe..03dfd27 100644 --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c @@ -494,8 +494,7 @@ static int ssb_devices_register(struct ssb_bus *bus) #endif break; case SSB_BUSTYPE_SDIO: -#ifdef CONFIG_SSB_SDIO - sdev->irq = bus->host_sdio->dev.irq; +#ifdef CONFIG_SSB_SDIOHOST dev->parent = &bus->host_sdio->dev; #endif break; diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 6e8bcdf..a678186 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1312,9 +1312,9 @@ static int processcompl(struct async *as, void __user * __user *arg) void __user *addr = as->userurb; unsigned int i; - if (as->userbuffer) + if (as->userbuffer && urb->actual_length) if (copy_to_user(as->userbuffer, urb->transfer_buffer, - urb->transfer_buffer_length)) + urb->actual_length)) goto err_out; if (put_user(as->status, &userurb->status)) goto err_out; @@ -1334,14 +1334,11 @@ static int processcompl(struct async *as, void __user * __user *arg) } } - free_async(as); - if (put_user(addr, (void __user * __user *)arg)) return -EFAULT; return 0; err_out: - free_async(as); return -EFAULT; } @@ -1371,8 +1368,11 @@ static struct async *reap_as(struct dev_state *ps) static int proc_reapurb(struct dev_state *ps, void __user *arg) { struct async *as = reap_as(ps); - if (as) - return processcompl(as, (void __user * __user *)arg); + if (as) { + int retval = processcompl(as, (void __user * __user *)arg); + free_async(as); + return retval; + } if (signal_pending(current)) return -EINTR; return -EIO; @@ -1380,11 +1380,16 @@ static int proc_reapurb(struct dev_state *ps, void __user *arg) static int proc_reapurbnonblock(struct dev_state *ps, void __user *arg) { + int retval; struct async *as; - if (!(as = async_getcompleted(ps))) - return -EAGAIN; - return processcompl(as, (void __user * __user *)arg); + as = async_getcompleted(ps); + retval = -EAGAIN; + if (as) { + retval = processcompl(as, (void __user * __user *)arg); + free_async(as); + } + return retval; } #ifdef CONFIG_COMPAT @@ -1475,9 +1480,9 @@ static int processcompl_compat(struct async *as, void __user * __user *arg) void __user *addr = as->userurb; unsigned int i; - if (as->userbuffer) + if (as->userbuffer && urb->actual_length) if (copy_to_user(as->userbuffer, urb->transfer_buffer, - urb->transfer_buffer_length)) + urb->actual_length)) return -EFAULT; if (put_user(as->status, &userurb->status)) return -EFAULT; @@ -1497,7 +1502,6 @@ static int processcompl_compat(struct async *as, void __user * __user *arg) } } - free_async(as); if (put_user(ptr_to_compat(addr), (u32 __user *)arg)) return -EFAULT; return 0; @@ -1506,8 +1510,11 @@ static int processcompl_compat(struct async *as, void __user * __user *arg) static int proc_reapurb_compat(struct dev_state *ps, void __user *arg) { struct async *as = reap_as(ps); - if (as) - return processcompl_compat(as, (void __user * __user *)arg); + if (as) { + int retval = processcompl_compat(as, (void __user * __user *)arg); + free_async(as); + return retval; + } if (signal_pending(current)) return -EINTR; return -EIO; @@ -1515,11 +1522,16 @@ static int proc_reapurb_compat(struct dev_state *ps, void __user *arg) static int proc_reapurbnonblock_compat(struct dev_state *ps, void __user *arg) { + int retval; struct async *as; - if (!(as = async_getcompleted(ps))) - return -EAGAIN; - return processcompl_compat(as, (void __user * __user *)arg); + retval = -EAGAIN; + as = async_getcompleted(ps); + if (as) { + retval = processcompl_compat(as, (void __user * __user *)arg); + free_async(as); + } + return retval; } diff --git a/drivers/usb/gadget/f_eem.c b/drivers/usb/gadget/f_eem.c index 0a577d5..d4f0db5 100644 --- a/drivers/usb/gadget/f_eem.c +++ b/drivers/usb/gadget/f_eem.c @@ -358,7 +358,7 @@ done: * b15: bmType (0 == data) */ len = skb->len; - put_unaligned_le16((len & 0x3FFF) | BIT(14), skb_push(skb, 2)); + put_unaligned_le16(len & 0x3FFF, skb_push(skb, 2)); /* add a zero-length EEM packet, if needed */ if (padlen) @@ -464,7 +464,6 @@ static int eem_unwrap(struct gether *port, } /* validate CRC */ - crc = get_unaligned_le32(skb->data + len - ETH_FCS_LEN); if (header & BIT(14)) { crc = get_unaligned_le32(skb->data + len - ETH_FCS_LEN); diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c index 4295601..76496f5 100644 --- a/drivers/usb/gadget/multi.c +++ b/drivers/usb/gadget/multi.c @@ -29,7 +29,7 @@ #if defined USB_ETH_RNDIS # undef USB_ETH_RNDIS #endif -#ifdef CONFIG_USB_ETH_RNDIS +#ifdef CONFIG_USB_G_MULTI_RNDIS # define USB_ETH_RNDIS y #endif diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c index e220fb8..8b45145 100644 --- a/drivers/usb/gadget/r8a66597-udc.c +++ b/drivers/usb/gadget/r8a66597-udc.c @@ -26,6 +26,7 @@ #include <linux/io.h> #include <linux/platform_device.h> #include <linux/clk.h> +#include <linux/err.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 4b5dbd0..5fc80a1 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -2582,6 +2582,7 @@ err: hsotg->gadget.dev.driver = NULL; return ret; } +EXPORT_SYMBOL(usb_gadget_register_driver); int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) { diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index c75d927..1937267 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -196,7 +196,9 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) if (hostpc_reg) { u32 t3; + spin_unlock_irq(&ehci->lock); msleep(5);/* 5ms for HCD enter low pwr mode */ + spin_lock_irq(&ehci->lock); t3 = ehci_readl(ehci, hostpc_reg); ehci_writel(ehci, t3 | HOSTPC_PHCD, hostpc_reg); t3 = ehci_readl(ehci, hostpc_reg); @@ -904,17 +906,18 @@ static int ehci_hub_control ( if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) goto error; - ehci_writel(ehci, temp | PORT_SUSPEND, status_reg); + /* After above check the port must be connected. * Set appropriate bit thus could put phy into low power * mode if we have hostpc feature */ + temp &= ~PORT_WKCONN_E; + temp |= PORT_WKDISC_E | PORT_WKOC_E; + ehci_writel(ehci, temp | PORT_SUSPEND, status_reg); if (hostpc_reg) { - temp &= ~PORT_WKCONN_E; - temp |= (PORT_WKDISC_E | PORT_WKOC_E); - ehci_writel(ehci, temp | PORT_SUSPEND, - status_reg); + spin_unlock_irqrestore(&ehci->lock, flags); msleep(5);/* 5ms for HCD enter low pwr mode */ + spin_lock_irqsave(&ehci->lock, flags); temp1 = ehci_readl(ehci, hostpc_reg); ehci_writel(ehci, temp1 | HOSTPC_PHCD, hostpc_reg); diff --git a/drivers/usb/host/fhci-tds.c b/drivers/usb/host/fhci-tds.c index d224ab4..e123289 100644 --- a/drivers/usb/host/fhci-tds.c +++ b/drivers/usb/host/fhci-tds.c @@ -105,7 +105,7 @@ void fhci_ep0_free(struct fhci_usb *usb) if (ep->td_base) cpm_muram_free(cpm_muram_offset(ep->td_base)); - if (ep->conf_frame_Q) { + if (kfifo_initialized(&ep->conf_frame_Q)) { size = cq_howmany(&ep->conf_frame_Q); for (; size; size--) { struct packet *pkt = cq_get(&ep->conf_frame_Q); @@ -115,7 +115,7 @@ void fhci_ep0_free(struct fhci_usb *usb) cq_delete(&ep->conf_frame_Q); } - if (ep->empty_frame_Q) { + if (kfifo_initialized(&ep->empty_frame_Q)) { size = cq_howmany(&ep->empty_frame_Q); for (; size; size--) { struct packet *pkt = cq_get(&ep->empty_frame_Q); @@ -125,7 +125,7 @@ void fhci_ep0_free(struct fhci_usb *usb) cq_delete(&ep->empty_frame_Q); } - if (ep->dummy_packets_Q) { + if (kfifo_initialized(&ep->dummy_packets_Q)) { size = cq_howmany(&ep->dummy_packets_Q); for (; size; size--) { u8 *buff = cq_get(&ep->dummy_packets_Q); diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index 0025847..8b37a4b 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -3245,6 +3245,7 @@ static struct usb_device_id sisusb_table [] = { { USB_DEVICE(0x0711, 0x0902) }, { USB_DEVICE(0x0711, 0x0903) }, { USB_DEVICE(0x0711, 0x0918) }, + { USB_DEVICE(0x0711, 0x0920) }, { USB_DEVICE(0x182d, 0x021c) }, { USB_DEVICE(0x182d, 0x0269) }, { } diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig index de56b3d..3d2d3e5 100644 --- a/drivers/usb/otg/Kconfig +++ b/drivers/usb/otg/Kconfig @@ -44,6 +44,7 @@ config ISP1301_OMAP config USB_ULPI bool "Generic ULPI Transceiver Driver" depends on ARM + select USB_OTG_UTILS help Enable this to support ULPI connected USB OTG transceivers which are likely found on embedded boards. diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 216f187..7638828 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -50,7 +50,7 @@ * Version Information */ #define DRIVER_VERSION "v1.5.0" -#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>" +#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>, Andreas Mohr" #define DRIVER_DESC "USB FTDI Serial Converters Driver" static int debug; @@ -145,10 +145,15 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = { +/* + * Device ID not listed? Test via module params product/vendor or + * /sys/bus/usb/ftdi_sio/new_id, then send patch/report! + */ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) }, { USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) }, { USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_NXTCAM_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) }, @@ -552,9 +557,16 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_IBS_PEDO_PID) }, { USB_DEVICE(FTDI_VID, FTDI_IBS_PROD_PID) }, /* - * Due to many user requests for multiple ELV devices we enable - * them by default. + * ELV devices: */ + { USB_DEVICE(FTDI_VID, FTDI_ELV_USR_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_MSM1_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_KL100_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_WS550_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_EC3000_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_WS888_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_TWS550_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_FEM_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_CLI7000_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_PPS7330_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_TFM100_PID) }, @@ -571,11 +583,17 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_ELV_PCK100_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_RFP500_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_FS20SIG_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_UTP8_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_WS300PC_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_WS444PC_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1300PC_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_EM1010PC_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_WS500_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_HS485_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_UMS100_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_TFD128_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_FM3RX_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_WS777_PID) }, { USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) }, { USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) }, { USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) }, @@ -697,6 +715,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) }, { USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) }, { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) }, + { USB_DEVICE(PAPOUCH_VID, PAPOUCH_AD4USB_PID) }, { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) }, { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) }, { USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index da92b49..c8951ae 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -38,6 +38,8 @@ /* www.candapter.com Ewert Energy Systems CANdapter device */ #define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */ +#define FTDI_NXTCAM_PID 0xABB8 /* NXTCam for Mindstorms NXT */ + /* OOCDlink by Joern Kaipf <joernk@web.de> * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */ #define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */ @@ -161,22 +163,37 @@ /* * ELV USB devices submitted by Christian Abt of ELV (www.elv.de). * All of these devices use FTDI's vendor ID (0x0403). + * Further IDs taken from ELV Windows .inf file. * * The previously included PID for the UO 100 module was incorrect. * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58). * * Armin Laeuger originally sent the PID for the UM 100 module. */ +#define FTDI_ELV_USR_PID 0xE000 /* ELV Universal-Sound-Recorder */ +#define FTDI_ELV_MSM1_PID 0xE001 /* ELV Mini-Sound-Modul */ +#define FTDI_ELV_KL100_PID 0xE002 /* ELV Kfz-Leistungsmesser KL 100 */ +#define FTDI_ELV_WS550_PID 0xE004 /* WS 550 */ +#define FTDI_ELV_EC3000_PID 0xE006 /* ENERGY CONTROL 3000 USB */ +#define FTDI_ELV_WS888_PID 0xE008 /* WS 888 */ +#define FTDI_ELV_TWS550_PID 0xE009 /* Technoline WS 550 */ +#define FTDI_ELV_FEM_PID 0xE00A /* Funk Energie Monitor */ #define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */ #define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */ #define FTDI_ELV_HS485_PID 0xE0EA /* USB to RS-485 adapter */ +#define FTDI_ELV_UMS100_PID 0xE0EB /* ELV USB Master-Slave Schaltsteckdose UMS 100 */ +#define FTDI_ELV_TFD128_PID 0xE0EC /* ELV Temperatur-Feuchte-Datenlogger TFD 128 */ +#define FTDI_ELV_FM3RX_PID 0xE0ED /* ELV Messwertuebertragung FM3 RX */ +#define FTDI_ELV_WS777_PID 0xE0EE /* Conrad WS 777 */ #define FTDI_ELV_EM1010PC_PID 0xE0EF /* Engery monitor EM 1010 PC */ #define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */ #define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */ #define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */ #define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */ #define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */ +#define FTDI_ELV_UTP8_PID 0xE0F5 /* ELV UTP 8 */ #define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */ +#define FTDI_ELV_WS444PC_PID 0xE0F7 /* Conrad WS 444 PC */ #define FTDI_PHI_FISCO_PID 0xE40B /* PHI Fisco USB to Serial cable */ #define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */ #define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */ @@ -968,6 +985,7 @@ #define PAPOUCH_VID 0x5050 /* Vendor ID */ #define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */ #define PAPOUCH_QUIDO4x4_PID 0x0900 /* Quido 4/4 Module */ +#define PAPOUCH_AD4USB_PID 0x8003 /* AD4USB Measurement Module */ /* * Marvell SheevaPlug diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index ac1b644..3eb6143 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -298,6 +298,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless Direct IP modems */ .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist }, + { USB_DEVICE(0x413C, 0x08133) }, /* Dell Computer Corp. Wireless 5720 VZW Mobile Broadband (EVDO Rev-A) Minicard GPS Port */ { } }; diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index c932f90..49575fb 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -941,7 +941,7 @@ UNUSUAL_DEV( 0x07ab, 0xfccd, 0x0000, 0x9999, UNUSUAL_DEV( 0x07af, 0x0004, 0x0100, 0x0133, "Microtech", "USB-SCSI-DB25", - US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init, + US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init, US_FL_SCM_MULT_TARG ), UNUSUAL_DEV( 0x07af, 0x0005, 0x0100, 0x0100, diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c index e4e4d43..9ee67d6 100644 --- a/drivers/video/aty/aty128fb.c +++ b/drivers/video/aty/aty128fb.c @@ -1931,22 +1931,22 @@ static int __devinit aty128_init(struct pci_dev *pdev, const struct pci_device_i * PowerMac2,2 summer 2000 iMacs * PowerMac4,1 january 2001 iMacs "flower power" */ - if (machine_is_compatible("PowerMac2,1") || - machine_is_compatible("PowerMac2,2") || - machine_is_compatible("PowerMac4,1")) + if (of_machine_is_compatible("PowerMac2,1") || + of_machine_is_compatible("PowerMac2,2") || + of_machine_is_compatible("PowerMac4,1")) default_vmode = VMODE_1024_768_75; /* iBook SE */ - if (machine_is_compatible("PowerBook2,2")) + if (of_machine_is_compatible("PowerBook2,2")) default_vmode = VMODE_800_600_60; /* PowerBook Firewire (Pismo), iBook Dual USB */ - if (machine_is_compatible("PowerBook3,1") || - machine_is_compatible("PowerBook4,1")) + if (of_machine_is_compatible("PowerBook3,1") || + of_machine_is_compatible("PowerBook4,1")) default_vmode = VMODE_1024_768_60; /* PowerBook Titanium */ - if (machine_is_compatible("PowerBook3,2")) + if (of_machine_is_compatible("PowerBook3,2")) default_vmode = VMODE_1152_768_60; if (default_cmode > 16) diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c index 1ddeb4c..e45ab8d 100644 --- a/drivers/video/aty/atyfb_base.c +++ b/drivers/video/aty/atyfb_base.c @@ -2439,7 +2439,7 @@ static int __devinit aty_init(struct fb_info *info) * The Apple iBook1 uses non-standard memory frequencies. * We detect it and set the frequency manually. */ - if (machine_is_compatible("PowerBook2,1")) { + if (of_machine_is_compatible("PowerBook2,1")) { par->pll_limits.mclk = 70; par->pll_limits.xclk = 53; } @@ -2659,7 +2659,7 @@ static int __devinit aty_init(struct fb_info *info) FBINFO_HWACCEL_YPAN; #ifdef CONFIG_PMAC_BACKLIGHT - if (M64_HAS(G3_PB_1_1) && machine_is_compatible("PowerBook1,1")) { + if (M64_HAS(G3_PB_1_1) && of_machine_is_compatible("PowerBook1,1")) { /* * these bits let the 101 powerbook * wake up from sleep -- paulus @@ -2690,9 +2690,9 @@ static int __devinit aty_init(struct fb_info *info) if (M64_HAS(G3_PB_1024x768)) /* G3 PowerBook with 1024x768 LCD */ default_vmode = VMODE_1024_768_60; - else if (machine_is_compatible("iMac")) + else if (of_machine_is_compatible("iMac")) default_vmode = VMODE_1024_768_75; - else if (machine_is_compatible("PowerBook2,1")) + else if (of_machine_is_compatible("PowerBook2,1")) /* iBook with 800x600 LCD */ default_vmode = VMODE_800_600_60; else @@ -3104,7 +3104,7 @@ static int __devinit atyfb_setup_sparc(struct pci_dev *pdev, } dp = pci_device_to_OF_node(pdev); - if (node == dp->node) { + if (node == dp->phandle) { struct fb_var_screeninfo *var = &default_var; unsigned int N, P, Q, M, T, R; u32 v_total, h_total; diff --git a/drivers/video/aty/radeon_backlight.c b/drivers/video/aty/radeon_backlight.c index 1a056ad..fa1198c 100644 --- a/drivers/video/aty/radeon_backlight.c +++ b/drivers/video/aty/radeon_backlight.c @@ -175,9 +175,9 @@ void radeonfb_bl_init(struct radeonfb_info *rinfo) #ifdef CONFIG_PMAC_BACKLIGHT pdata->negative = pdata->negative || - machine_is_compatible("PowerBook4,3") || - machine_is_compatible("PowerBook6,3") || - machine_is_compatible("PowerBook6,5"); + of_machine_is_compatible("PowerBook4,3") || + of_machine_is_compatible("PowerBook6,3") || + of_machine_is_compatible("PowerBook6,5"); #endif rinfo->info->bl_dev = bd; diff --git a/drivers/video/efifb.c b/drivers/video/efifb.c index eb12182..d25df51 100644 --- a/drivers/video/efifb.c +++ b/drivers/video/efifb.c @@ -161,8 +161,17 @@ static int efifb_setcolreg(unsigned regno, unsigned red, unsigned green, return 0; } +static void efifb_destroy(struct fb_info *info) +{ + if (info->screen_base) + iounmap(info->screen_base); + release_mem_region(info->aperture_base, info->aperture_size); + framebuffer_release(info); +} + static struct fb_ops efifb_ops = { .owner = THIS_MODULE, + .fb_destroy = efifb_destroy, .fb_setcolreg = efifb_setcolreg, .fb_fillrect = cfb_fillrect, .fb_copyarea = cfb_copyarea, @@ -281,7 +290,7 @@ static int __init efifb_probe(struct platform_device *dev) info->par = NULL; info->aperture_base = efifb_fix.smem_start; - info->aperture_size = size_total; + info->aperture_size = size_remap; info->screen_base = ioremap(efifb_fix.smem_start, efifb_fix.smem_len); if (!info->screen_base) { diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c index 505be88..369f2ee 100644 --- a/drivers/virtio/virtio_balloon.c +++ b/drivers/virtio/virtio_balloon.c @@ -28,7 +28,7 @@ struct virtio_balloon { struct virtio_device *vdev; - struct virtqueue *inflate_vq, *deflate_vq; + struct virtqueue *inflate_vq, *deflate_vq, *stats_vq; /* Where the ballooning thread waits for config to change. */ wait_queue_head_t config_change; @@ -49,6 +49,10 @@ struct virtio_balloon /* The array of pfns we tell the Host about. */ unsigned int num_pfns; u32 pfns[256]; + + /* Memory statistics */ + int need_stats_update; + struct virtio_balloon_stat stats[VIRTIO_BALLOON_S_NR]; }; static struct virtio_device_id id_table[] = { @@ -154,6 +158,72 @@ static void leak_balloon(struct virtio_balloon *vb, size_t num) } } +static inline void update_stat(struct virtio_balloon *vb, int idx, + u16 tag, u64 val) +{ + BUG_ON(idx >= VIRTIO_BALLOON_S_NR); + vb->stats[idx].tag = tag; + vb->stats[idx].val = val; +} + +#define pages_to_bytes(x) ((u64)(x) << PAGE_SHIFT) + +static void update_balloon_stats(struct virtio_balloon *vb) +{ + unsigned long events[NR_VM_EVENT_ITEMS]; + struct sysinfo i; + int idx = 0; + + all_vm_events(events); + si_meminfo(&i); + + update_stat(vb, idx++, VIRTIO_BALLOON_S_SWAP_IN, + pages_to_bytes(events[PSWPIN])); + update_stat(vb, idx++, VIRTIO_BALLOON_S_SWAP_OUT, + pages_to_bytes(events[PSWPOUT])); + update_stat(vb, idx++, VIRTIO_BALLOON_S_MAJFLT, events[PGMAJFAULT]); + update_stat(vb, idx++, VIRTIO_BALLOON_S_MINFLT, events[PGFAULT]); + update_stat(vb, idx++, VIRTIO_BALLOON_S_MEMFREE, + pages_to_bytes(i.freeram)); + update_stat(vb, idx++, VIRTIO_BALLOON_S_MEMTOT, + pages_to_bytes(i.totalram)); +} + +/* + * While most virtqueues communicate guest-initiated requests to the hypervisor, + * the stats queue operates in reverse. The driver initializes the virtqueue + * with a single buffer. From that point forward, all conversations consist of + * a hypervisor request (a call to this function) which directs us to refill + * the virtqueue with a fresh stats buffer. Since stats collection can sleep, + * we notify our kthread which does the actual work via stats_handle_request(). + */ +static void stats_request(struct virtqueue *vq) +{ + struct virtio_balloon *vb; + unsigned int len; + + vb = vq->vq_ops->get_buf(vq, &len); + if (!vb) + return; + vb->need_stats_update = 1; + wake_up(&vb->config_change); +} + +static void stats_handle_request(struct virtio_balloon *vb) +{ + struct virtqueue *vq; + struct scatterlist sg; + + vb->need_stats_update = 0; + update_balloon_stats(vb); + + vq = vb->stats_vq; + sg_init_one(&sg, vb->stats, sizeof(vb->stats)); + if (vq->vq_ops->add_buf(vq, &sg, 1, 0, vb) < 0) + BUG(); + vq->vq_ops->kick(vq); +} + static void virtballoon_changed(struct virtio_device *vdev) { struct virtio_balloon *vb = vdev->priv; @@ -190,8 +260,11 @@ static int balloon(void *_vballoon) try_to_freeze(); wait_event_interruptible(vb->config_change, (diff = towards_target(vb)) != 0 + || vb->need_stats_update || kthread_should_stop() || freezing(current)); + if (vb->need_stats_update) + stats_handle_request(vb); if (diff > 0) fill_balloon(vb, diff); else if (diff < 0) @@ -204,10 +277,10 @@ static int balloon(void *_vballoon) static int virtballoon_probe(struct virtio_device *vdev) { struct virtio_balloon *vb; - struct virtqueue *vqs[2]; - vq_callback_t *callbacks[] = { balloon_ack, balloon_ack }; - const char *names[] = { "inflate", "deflate" }; - int err; + struct virtqueue *vqs[3]; + vq_callback_t *callbacks[] = { balloon_ack, balloon_ack, stats_request }; + const char *names[] = { "inflate", "deflate", "stats" }; + int err, nvqs; vdev->priv = vb = kmalloc(sizeof(*vb), GFP_KERNEL); if (!vb) { @@ -219,14 +292,31 @@ static int virtballoon_probe(struct virtio_device *vdev) vb->num_pages = 0; init_waitqueue_head(&vb->config_change); vb->vdev = vdev; + vb->need_stats_update = 0; - /* We expect two virtqueues. */ - err = vdev->config->find_vqs(vdev, 2, vqs, callbacks, names); + /* We expect two virtqueues: inflate and deflate, + * and optionally stat. */ + nvqs = virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_STATS_VQ) ? 3 : 2; + err = vdev->config->find_vqs(vdev, nvqs, vqs, callbacks, names); if (err) goto out_free_vb; vb->inflate_vq = vqs[0]; vb->deflate_vq = vqs[1]; + if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_STATS_VQ)) { + struct scatterlist sg; + vb->stats_vq = vqs[2]; + + /* + * Prime this virtqueue with one buffer so the hypervisor can + * use it to signal us later. + */ + sg_init_one(&sg, vb->stats, sizeof vb->stats); + if (vb->stats_vq->vq_ops->add_buf(vb->stats_vq, + &sg, 1, 0, vb) < 0) + BUG(); + vb->stats_vq->vq_ops->kick(vb->stats_vq); + } vb->thread = kthread_run(balloon, vb, "vballoon"); if (IS_ERR(vb->thread)) { @@ -264,7 +354,10 @@ static void __devexit virtballoon_remove(struct virtio_device *vdev) kfree(vb); } -static unsigned int features[] = { VIRTIO_BALLOON_F_MUST_TELL_HOST }; +static unsigned int features[] = { + VIRTIO_BALLOON_F_MUST_TELL_HOST, + VIRTIO_BALLOON_F_STATS_VQ, +}; static struct virtio_driver virtio_balloon_driver = { .feature_table = features, diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c index 28d9cf7..1d5191f 100644 --- a/drivers/virtio/virtio_pci.c +++ b/drivers/virtio/virtio_pci.c @@ -702,7 +702,7 @@ static struct pci_driver virtio_pci_driver = { .name = "virtio-pci", .id_table = virtio_pci_id_table, .probe = virtio_pci_probe, - .remove = virtio_pci_remove, + .remove = __devexit_p(virtio_pci_remove), #ifdef CONFIG_PM .suspend = virtio_pci_suspend, .resume = virtio_pci_resume, diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c index fbd2ecd..0db906b 100644 --- a/drivers/virtio/virtio_ring.c +++ b/drivers/virtio/virtio_ring.c @@ -21,6 +21,24 @@ #include <linux/virtio_config.h> #include <linux/device.h> +/* virtio guest is communicating with a virtual "device" that actually runs on + * a host processor. Memory barriers are used to control SMP effects. */ +#ifdef CONFIG_SMP +/* Where possible, use SMP barriers which are more lightweight than mandatory + * barriers, because mandatory barriers control MMIO effects on accesses + * through relaxed memory I/O windows (which virtio does not use). */ +#define virtio_mb() smp_mb() +#define virtio_rmb() smp_rmb() +#define virtio_wmb() smp_wmb() +#else +/* We must force memory ordering even if guest is UP since host could be + * running on another CPU, but SMP barriers are defined to barrier() in that + * configuration. So fall back to mandatory barriers instead. */ +#define virtio_mb() mb() +#define virtio_rmb() rmb() +#define virtio_wmb() wmb() +#endif + #ifdef DEBUG /* For development, we want to crash whenever the ring is screwed. */ #define BAD_RING(_vq, fmt, args...) \ @@ -36,10 +54,9 @@ panic("%s:in_use = %i\n", \ (_vq)->vq.name, (_vq)->in_use); \ (_vq)->in_use = __LINE__; \ - mb(); \ } while (0) #define END_USE(_vq) \ - do { BUG_ON(!(_vq)->in_use); (_vq)->in_use = 0; mb(); } while(0) + do { BUG_ON(!(_vq)->in_use); (_vq)->in_use = 0; } while(0) #else #define BAD_RING(_vq, fmt, args...) \ do { \ @@ -221,13 +238,13 @@ static void vring_kick(struct virtqueue *_vq) START_USE(vq); /* Descriptors and available array need to be set before we expose the * new available array entries. */ - wmb(); + virtio_wmb(); vq->vring.avail->idx += vq->num_added; vq->num_added = 0; /* Need to update avail index before checking if we should notify */ - mb(); + virtio_mb(); if (!(vq->vring.used->flags & VRING_USED_F_NO_NOTIFY)) /* Prod other side to tell it about changes. */ @@ -286,7 +303,7 @@ static void *vring_get_buf(struct virtqueue *_vq, unsigned int *len) } /* Only get used array entries after they have been exposed by host. */ - rmb(); + virtio_rmb(); i = vq->vring.used->ring[vq->last_used_idx%vq->vring.num].id; *len = vq->vring.used->ring[vq->last_used_idx%vq->vring.num].len; @@ -324,7 +341,7 @@ static bool vring_enable_cb(struct virtqueue *_vq) /* We optimistically turn back on interrupts, then check if there was * more to do. */ vq->vring.avail->flags &= ~VRING_AVAIL_F_NO_INTERRUPT; - mb(); + virtio_mb(); if (unlikely(more_used(vq))) { END_USE(vq); return false; @@ -334,6 +351,30 @@ static bool vring_enable_cb(struct virtqueue *_vq) return true; } +static void *vring_detach_unused_buf(struct virtqueue *_vq) +{ + struct vring_virtqueue *vq = to_vvq(_vq); + unsigned int i; + void *buf; + + START_USE(vq); + + for (i = 0; i < vq->vring.num; i++) { + if (!vq->data[i]) + continue; + /* detach_buf clears data, so grab it now. */ + buf = vq->data[i]; + detach_buf(vq, i); + END_USE(vq); + return buf; + } + /* That should have freed everything. */ + BUG_ON(vq->num_free != vq->vring.num); + + END_USE(vq); + return NULL; +} + irqreturn_t vring_interrupt(int irq, void *_vq) { struct vring_virtqueue *vq = to_vvq(_vq); @@ -360,6 +401,7 @@ static struct virtqueue_ops vring_vq_ops = { .kick = vring_kick, .disable_cb = vring_disable_cb, .enable_cb = vring_enable_cb, + .detach_unused_buf = vring_detach_unused_buf, }; struct virtqueue *vring_new_virtqueue(unsigned int num, @@ -406,8 +448,11 @@ struct virtqueue *vring_new_virtqueue(unsigned int num, /* Put everything in free lists. */ vq->num_free = num; vq->free_head = 0; - for (i = 0; i < num-1; i++) + for (i = 0; i < num-1; i++) { vq->vring.desc[i].next = i+1; + vq->data[i] = NULL; + } + vq->data[i] = NULL; return &vq->vq; } diff --git a/drivers/watchdog/bfin_wdt.c b/drivers/watchdog/bfin_wdt.c index c7b3f9d..2159e66 100644 --- a/drivers/watchdog/bfin_wdt.c +++ b/drivers/watchdog/bfin_wdt.c @@ -1,9 +1,8 @@ /* * Blackfin On-Chip Watchdog Driver - * Supports BF53[123]/BF53[467]/BF54[2489]/BF561 * * Originally based on softdog.c - * Copyright 2006-2007 Analog Devices Inc. + * Copyright 2006-2010 Analog Devices Inc. * Copyright 2006-2007 Michele d'Amico * Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk> * @@ -137,13 +136,15 @@ static int bfin_wdt_running(void) */ static int bfin_wdt_set_timeout(unsigned long t) { - u32 cnt; + u32 cnt, max_t, sclk; unsigned long flags; - stampit(); + sclk = get_sclk(); + max_t = -1 / sclk; + cnt = t * sclk; + stamp("maxtimeout=%us newtimeout=%lus (cnt=%#x)", max_t, t, cnt); - cnt = t * get_sclk(); - if (cnt < get_sclk()) { + if (t > max_t) { printk(KERN_WARNING PFX "timeout value is too large\n"); return -EINVAL; } diff --git a/fs/cachefiles/namei.c b/fs/cachefiles/namei.c index 14ac480..eeb4986 100644 --- a/fs/cachefiles/namei.c +++ b/fs/cachefiles/namei.c @@ -348,7 +348,17 @@ int cachefiles_delete_object(struct cachefiles_cache *cache, dir = dget_parent(object->dentry); mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_PARENT); - ret = cachefiles_bury_object(cache, dir, object->dentry); + + /* we need to check that our parent is _still_ our parent - it may have + * been renamed */ + if (dir == object->dentry->d_parent) { + ret = cachefiles_bury_object(cache, dir, object->dentry); + } else { + /* it got moved, presumably by cachefilesd culling it, so it's + * no longer in the key path and we can ignore it */ + mutex_unlock(&dir->d_inode->i_mutex); + ret = 0; + } dput(dir); _leave(" = %d", ret); @@ -637,7 +637,6 @@ int setup_arg_pages(struct linux_binprm *bprm, * will align it up. */ rlim_stack = rlimit(RLIMIT_STACK) & PAGE_MASK; - rlim_stack = min(rlim_stack, stack_size); #ifdef CONFIG_STACK_GROWSUP if (stack_size + stack_expand > rlim_stack) stack_base = vma->vm_start + rlim_stack; @@ -823,6 +823,17 @@ fail: } /* + * This is a temporary kludge to deal with "automount" symlinks; proper + * solution is to trigger them on follow_mount(), so that do_lookup() + * would DTRT. To be killed before 2.6.34-final. + */ +static inline int follow_on_final(struct inode *inode, unsigned lookup_flags) +{ + return inode && unlikely(inode->i_op->follow_link) && + ((lookup_flags & LOOKUP_FOLLOW) || S_ISDIR(inode->i_mode)); +} + +/* * Name resolution. * This is the basic name resolution function, turning a pathname into * the final dentry. We expect 'base' to be positive and a directory. @@ -942,8 +953,7 @@ last_component: if (err) break; inode = next.dentry->d_inode; - if ((lookup_flags & LOOKUP_FOLLOW) - && inode && inode->i_op->follow_link) { + if (follow_on_final(inode, lookup_flags)) { err = do_follow_link(&next, nd); if (err) goto return_err; diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c index 97d79ef..8715d19 100644 --- a/fs/nfsd/vfs.c +++ b/fs/nfsd/vfs.c @@ -752,7 +752,8 @@ nfsd_open(struct svc_rqst *rqstp, struct svc_fh *fhp, int type, flags, current_cred()); if (IS_ERR(*filp)) host_err = PTR_ERR(*filp); - host_err = ima_file_check(*filp, access); + else + host_err = ima_file_check(*filp, access); out_nfserr: err = nfserrno(host_err); out: diff --git a/fs/proc/base.c b/fs/proc/base.c index e42bbd8..58324c2 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -2369,16 +2369,30 @@ static void *proc_self_follow_link(struct dentry *dentry, struct nameidata *nd) { struct pid_namespace *ns = dentry->d_sb->s_fs_info; pid_t tgid = task_tgid_nr_ns(current, ns); - char tmp[PROC_NUMBUF]; - if (!tgid) - return ERR_PTR(-ENOENT); - sprintf(tmp, "%d", task_tgid_nr_ns(current, ns)); - return ERR_PTR(vfs_follow_link(nd,tmp)); + char *name = ERR_PTR(-ENOENT); + if (tgid) { + name = __getname(); + if (!name) + name = ERR_PTR(-ENOMEM); + else + sprintf(name, "%d", tgid); + } + nd_set_link(nd, name); + return NULL; +} + +static void proc_self_put_link(struct dentry *dentry, struct nameidata *nd, + void *cookie) +{ + char *s = nd_get_link(nd); + if (!IS_ERR(s)) + __putname(s); } static const struct inode_operations proc_self_inode_operations = { .readlink = proc_self_readlink, .follow_link = proc_self_follow_link, + .put_link = proc_self_put_link, }; /* diff --git a/fs/proc/proc_devtree.c b/fs/proc/proc_devtree.c index 123257b..f8650dc 100644 --- a/fs/proc/proc_devtree.c +++ b/fs/proc/proc_devtree.c @@ -10,16 +10,19 @@ #include <linux/seq_file.h> #include <linux/stat.h> #include <linux/string.h> +#include <linux/of.h> +#include <linux/module.h> #include <asm/prom.h> #include <asm/uaccess.h> #include "internal.h" -#ifndef HAVE_ARCH_DEVTREE_FIXUPS static inline void set_node_proc_entry(struct device_node *np, struct proc_dir_entry *de) { -} +#ifdef HAVE_ARCH_DEVTREE_FIXUPS + np->pde = de; #endif +} static struct proc_dir_entry *proc_device_tree; diff --git a/fs/sysfs/inode.c b/fs/sysfs/inode.c index 220b758..6a06a1d 100644 --- a/fs/sysfs/inode.c +++ b/fs/sysfs/inode.c @@ -81,24 +81,23 @@ int sysfs_sd_setattr(struct sysfs_dirent *sd, struct iattr * iattr) if (!sd_attrs) return -ENOMEM; sd->s_iattr = sd_attrs; - } else { - /* attributes were changed at least once in past */ - iattrs = &sd_attrs->ia_iattr; - - if (ia_valid & ATTR_UID) - iattrs->ia_uid = iattr->ia_uid; - if (ia_valid & ATTR_GID) - iattrs->ia_gid = iattr->ia_gid; - if (ia_valid & ATTR_ATIME) - iattrs->ia_atime = iattr->ia_atime; - if (ia_valid & ATTR_MTIME) - iattrs->ia_mtime = iattr->ia_mtime; - if (ia_valid & ATTR_CTIME) - iattrs->ia_ctime = iattr->ia_ctime; - if (ia_valid & ATTR_MODE) { - umode_t mode = iattr->ia_mode; - iattrs->ia_mode = sd->s_mode = mode; - } + } + /* attributes were changed at least once in past */ + iattrs = &sd_attrs->ia_iattr; + + if (ia_valid & ATTR_UID) + iattrs->ia_uid = iattr->ia_uid; + if (ia_valid & ATTR_GID) + iattrs->ia_gid = iattr->ia_gid; + if (ia_valid & ATTR_ATIME) + iattrs->ia_atime = iattr->ia_atime; + if (ia_valid & ATTR_MTIME) + iattrs->ia_mtime = iattr->ia_mtime; + if (ia_valid & ATTR_CTIME) + iattrs->ia_ctime = iattr->ia_ctime; + if (ia_valid & ATTR_MODE) { + umode_t mode = iattr->ia_mode; + iattrs->ia_mode = sd->s_mode = mode; } return 0; } diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h index ab94335..6816be6 100644 --- a/include/linux/amba/bus.h +++ b/include/linux/amba/bus.h @@ -1,5 +1,9 @@ /* - * linux/include/asm-arm/hardware/amba.h + * linux/include/amba/bus.h + * + * This device type deals with ARM PrimeCells and anything else that + * presents a proper CID (0xB105F00D) at the end of the I/O register + * region or that is derived from a PrimeCell. * * Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved. * diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 5c80189..1896e86 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -461,8 +461,7 @@ struct request_queue #define QUEUE_FLAG_NONROT 14 /* non-rotational device (SSD) */ #define QUEUE_FLAG_VIRT QUEUE_FLAG_NONROT /* paravirt device */ #define QUEUE_FLAG_IO_STAT 15 /* do IO stats */ -#define QUEUE_FLAG_CQ 16 /* hardware does queuing */ -#define QUEUE_FLAG_DISCARD 17 /* supports DISCARD */ +#define QUEUE_FLAG_DISCARD 16 /* supports DISCARD */ #define QUEUE_FLAG_DEFAULT ((1 << QUEUE_FLAG_IO_STAT) | \ (1 << QUEUE_FLAG_CLUSTER) | \ @@ -586,7 +585,6 @@ enum { #define blk_queue_plugged(q) test_bit(QUEUE_FLAG_PLUGGED, &(q)->queue_flags) #define blk_queue_tagged(q) test_bit(QUEUE_FLAG_QUEUED, &(q)->queue_flags) -#define blk_queue_queuing(q) test_bit(QUEUE_FLAG_CQ, &(q)->queue_flags) #define blk_queue_stopped(q) test_bit(QUEUE_FLAG_STOPPED, &(q)->queue_flags) #define blk_queue_nomerges(q) test_bit(QUEUE_FLAG_NOMERGES, &(q)->queue_flags) #define blk_queue_nonrot(q) test_bit(QUEUE_FLAG_NONROT, &(q)->queue_flags) diff --git a/include/linux/fs.h b/include/linux/fs.h index b1bcb27..ebb1cd5 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -729,6 +729,7 @@ struct inode { uid_t i_uid; gid_t i_gid; dev_t i_rdev; + unsigned int i_blkbits; u64 i_version; loff_t i_size; #ifdef __NEED_I_SIZE_ORDERED @@ -738,7 +739,6 @@ struct inode { struct timespec i_mtime; struct timespec i_ctime; blkcnt_t i_blocks; - unsigned int i_blkbits; unsigned short i_bytes; umode_t i_mode; spinlock_t i_lock; /* i_blocks, i_bytes, maybe i_size */ diff --git a/include/linux/hid.h b/include/linux/hid.h index 8709365..b1344ec 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -501,7 +501,7 @@ struct hid_device { /* device report descriptor */ void (*hiddev_report_event) (struct hid_device *, struct hid_report *); /* handler for raw output data, used by hidraw */ - int (*hid_output_raw_report) (struct hid_device *, __u8 *, size_t); + int (*hid_output_raw_report) (struct hid_device *, __u8 *, size_t, unsigned char); /* debugging support via debugfs */ unsigned short debug; @@ -663,7 +663,7 @@ struct hid_ll_driver { /* Applications from HID Usage Tables 4/8/99 Version 1.1 */ /* We ignore a few input applications that are not widely used */ -#define IS_INPUT_APPLICATION(a) (((a >= 0x00010000) && (a <= 0x00010008)) || (a == 0x00010080) || (a == 0x000c0001) || (a == 0x000d0002)) +#define IS_INPUT_APPLICATION(a) (((a >= 0x00010000) && (a <= 0x00010008)) || (a == 0x00010080) || (a == 0x000c0001) || ((a >= 0x000d0002) && (a <= 0x000d0006))) /* HID core API */ @@ -690,6 +690,7 @@ int hid_input_report(struct hid_device *, int type, u8 *, int, int); int hidinput_find_field(struct hid_device *hid, unsigned int type, unsigned int code, struct hid_field **field); void hid_output_report(struct hid_report *report, __u8 *data); struct hid_device *hid_allocate_device(void); +struct hid_report *hid_register_report(struct hid_device *device, unsigned type, unsigned id); int hid_parse_report(struct hid_device *hid, __u8 *start, unsigned size); int hid_check_keys_pressed(struct hid_device *hid); int hid_connect(struct hid_device *hid, unsigned int connect_mask); diff --git a/include/linux/input.h b/include/linux/input.h index 735ceaf..f44ee91 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -376,6 +376,7 @@ struct input_absinfo { #define KEY_DISPLAY_OFF 245 /* display device to off state */ #define KEY_WIMAX 246 +#define KEY_RFKILL 247 /* Key that controls all radios */ /* Range 248 - 255 is reserved for special needs of AT keyboard driver */ @@ -597,6 +598,48 @@ struct input_absinfo { #define KEY_CAMERA_FOCUS 0x210 +#define BTN_TRIGGER_HAPPY 0x2c0 +#define BTN_TRIGGER_HAPPY1 0x2c0 +#define BTN_TRIGGER_HAPPY2 0x2c1 +#define BTN_TRIGGER_HAPPY3 0x2c2 +#define BTN_TRIGGER_HAPPY4 0x2c3 +#define BTN_TRIGGER_HAPPY5 0x2c4 +#define BTN_TRIGGER_HAPPY6 0x2c5 +#define BTN_TRIGGER_HAPPY7 0x2c6 +#define BTN_TRIGGER_HAPPY8 0x2c7 +#define BTN_TRIGGER_HAPPY9 0x2c8 +#define BTN_TRIGGER_HAPPY10 0x2c9 +#define BTN_TRIGGER_HAPPY11 0x2ca +#define BTN_TRIGGER_HAPPY12 0x2cb +#define BTN_TRIGGER_HAPPY13 0x2cc +#define BTN_TRIGGER_HAPPY14 0x2cd +#define BTN_TRIGGER_HAPPY15 0x2ce +#define BTN_TRIGGER_HAPPY16 0x2cf +#define BTN_TRIGGER_HAPPY17 0x2d0 +#define BTN_TRIGGER_HAPPY18 0x2d1 +#define BTN_TRIGGER_HAPPY19 0x2d2 +#define BTN_TRIGGER_HAPPY20 0x2d3 +#define BTN_TRIGGER_HAPPY21 0x2d4 +#define BTN_TRIGGER_HAPPY22 0x2d5 +#define BTN_TRIGGER_HAPPY23 0x2d6 +#define BTN_TRIGGER_HAPPY24 0x2d7 +#define BTN_TRIGGER_HAPPY25 0x2d8 +#define BTN_TRIGGER_HAPPY26 0x2d9 +#define BTN_TRIGGER_HAPPY27 0x2da +#define BTN_TRIGGER_HAPPY28 0x2db +#define BTN_TRIGGER_HAPPY29 0x2dc +#define BTN_TRIGGER_HAPPY30 0x2dd +#define BTN_TRIGGER_HAPPY31 0x2de +#define BTN_TRIGGER_HAPPY32 0x2df +#define BTN_TRIGGER_HAPPY33 0x2e0 +#define BTN_TRIGGER_HAPPY34 0x2e1 +#define BTN_TRIGGER_HAPPY35 0x2e2 +#define BTN_TRIGGER_HAPPY36 0x2e3 +#define BTN_TRIGGER_HAPPY37 0x2e4 +#define BTN_TRIGGER_HAPPY38 0x2e5 +#define BTN_TRIGGER_HAPPY39 0x2e6 +#define BTN_TRIGGER_HAPPY40 0x2e7 + /* We avoid low common keys in module aliases so they don't get huge. */ #define KEY_MIN_INTERESTING KEY_MUTE #define KEY_MAX 0x2ff diff --git a/include/linux/kfifo.h b/include/linux/kfifo.h index 6f6c5f3..bc0fc79 100644 --- a/include/linux/kfifo.h +++ b/include/linux/kfifo.h @@ -124,7 +124,7 @@ extern __must_check unsigned int kfifo_out_peek(struct kfifo *fifo, */ static inline bool kfifo_initialized(struct kfifo *fifo) { - return fifo->buffer != 0; + return fifo->buffer != NULL; } /** diff --git a/include/linux/of.h b/include/linux/of.h index e7facd8..f6d9cbc 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -19,6 +19,11 @@ #include <linux/bitops.h> #include <linux/kref.h> #include <linux/mod_devicetable.h> +#include <linux/spinlock.h> + +#include <asm/byteorder.h> + +#ifdef CONFIG_OF typedef u32 phandle; typedef u32 ihandle; @@ -39,10 +44,7 @@ struct of_irq_controller; struct device_node { const char *name; const char *type; - phandle node; -#if !defined(CONFIG_SPARC) - phandle linux_phandle; -#endif + phandle phandle; char *full_name; struct property *properties; @@ -63,6 +65,11 @@ struct device_node { #endif }; +/* Pointer for first entry in chain of all nodes. */ +extern struct device_node *allnodes; +extern struct device_node *of_chosen; +extern rwlock_t devtree_lock; + static inline int of_node_check_flag(struct device_node *n, unsigned long flag) { return test_bit(flag, &n->_flags); @@ -73,12 +80,6 @@ static inline void of_node_set_flag(struct device_node *n, unsigned long flag) set_bit(flag, &n->_flags); } -static inline void -set_node_proc_entry(struct device_node *dn, struct proc_dir_entry *de) -{ - dn->pde = de; -} - extern struct device_node *of_find_all_nodes(struct device_node *prev); #if defined(CONFIG_SPARC) @@ -101,26 +102,36 @@ extern void of_node_put(struct device_node *node); */ /* Helper to read a big number; size is in cells (not bytes) */ -static inline u64 of_read_number(const u32 *cell, int size) +static inline u64 of_read_number(const __be32 *cell, int size) { u64 r = 0; while (size--) - r = (r << 32) | *(cell++); + r = (r << 32) | be32_to_cpu(*(cell++)); return r; } /* Like of_read_number, but we want an unsigned long result */ -#ifdef CONFIG_PPC32 -static inline unsigned long of_read_ulong(const u32 *cell, int size) +static inline unsigned long of_read_ulong(const __be32 *cell, int size) { - return cell[size-1]; + /* toss away upper bits if unsigned long is smaller than u64 */ + return of_read_number(cell, size); } -#else -#define of_read_ulong(cell, size) of_read_number(cell, size) -#endif #include <asm/prom.h> +/* Default #address and #size cells. Allow arch asm/prom.h to override */ +#if !defined(OF_ROOT_NODE_ADDR_CELLS_DEFAULT) +#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT 1 +#define OF_ROOT_NODE_SIZE_CELLS_DEFAULT 1 +#endif + +/* Default string compare functions, Allow arch asm/prom.h to override */ +#if !defined(of_compat_cmp) +#define of_compat_cmp(s1, s2, l) strncasecmp((s1), (s2), (l)) +#define of_prop_cmp(s1, s2) strcmp((s1), (s2)) +#define of_node_cmp(s1, s2) strcasecmp((s1), (s2)) +#endif + /* flag descriptions */ #define OF_DYNAMIC 1 /* node and properties were allocated via kmalloc */ #define OF_DETACHED 2 /* node has been detached from the device tree */ @@ -187,4 +198,19 @@ extern int of_parse_phandles_with_args(struct device_node *np, const char *list_name, const char *cells_name, int index, struct device_node **out_node, const void **out_args); +extern int of_machine_is_compatible(const char *compat); + +extern int prom_add_property(struct device_node* np, struct property* prop); +extern int prom_remove_property(struct device_node *np, struct property *prop); +extern int prom_update_property(struct device_node *np, + struct property *newprop, + struct property *oldprop); + +#if defined(CONFIG_OF_DYNAMIC) +/* For updating the device tree at runtime */ +extern void of_attach_node(struct device_node *); +extern void of_detach_node(struct device_node *); +#endif + +#endif /* CONFIG_OF */ #endif /* _LINUX_OF_H */ diff --git a/include/linux/of_fdt.h b/include/linux/of_fdt.h index 41d432b..a1ca92c 100644 --- a/include/linux/of_fdt.h +++ b/include/linux/of_fdt.h @@ -42,45 +42,62 @@ * ends when size is 0 */ struct boot_param_header { - u32 magic; /* magic word OF_DT_HEADER */ - u32 totalsize; /* total size of DT block */ - u32 off_dt_struct; /* offset to structure */ - u32 off_dt_strings; /* offset to strings */ - u32 off_mem_rsvmap; /* offset to memory reserve map */ - u32 version; /* format version */ - u32 last_comp_version; /* last compatible version */ + __be32 magic; /* magic word OF_DT_HEADER */ + __be32 totalsize; /* total size of DT block */ + __be32 off_dt_struct; /* offset to structure */ + __be32 off_dt_strings; /* offset to strings */ + __be32 off_mem_rsvmap; /* offset to memory reserve map */ + __be32 version; /* format version */ + __be32 last_comp_version; /* last compatible version */ /* version 2 fields below */ - u32 boot_cpuid_phys; /* Physical CPU id we're booting on */ + __be32 boot_cpuid_phys; /* Physical CPU id we're booting on */ /* version 3 fields below */ - u32 dt_strings_size; /* size of the DT strings block */ + __be32 dt_strings_size; /* size of the DT strings block */ /* version 17 fields below */ - u32 dt_struct_size; /* size of the DT structure block */ + __be32 dt_struct_size; /* size of the DT structure block */ }; +/* TBD: Temporary export of fdt globals - remove when code fully merged */ +extern int __initdata dt_root_addr_cells; +extern int __initdata dt_root_size_cells; +extern struct boot_param_header *initial_boot_params; + /* For scanning the flat device-tree at boot time */ -extern int __init of_scan_flat_dt(int (*it)(unsigned long node, - const char *uname, int depth, - void *data), - void *data); -extern void __init *of_get_flat_dt_prop(unsigned long node, const char *name, - unsigned long *size); -extern int __init of_flat_dt_is_compatible(unsigned long node, - const char *name); -extern unsigned long __init of_get_flat_dt_root(void); +extern char *find_flat_dt_string(u32 offset); +extern int of_scan_flat_dt(int (*it)(unsigned long node, const char *uname, + int depth, void *data), + void *data); +extern void *of_get_flat_dt_prop(unsigned long node, const char *name, + unsigned long *size); +extern int of_flat_dt_is_compatible(unsigned long node, const char *name); +extern unsigned long of_get_flat_dt_root(void); +extern void early_init_dt_scan_chosen_arch(unsigned long node); +extern int early_init_dt_scan_chosen(unsigned long node, const char *uname, + int depth, void *data); +extern void early_init_dt_check_for_initrd(unsigned long node); +extern int early_init_dt_scan_memory(unsigned long node, const char *uname, + int depth, void *data); +extern void early_init_dt_add_memory_arch(u64 base, u64 size); +extern u64 early_init_dt_alloc_memory_arch(u64 size, u64 align); +extern u64 dt_mem_next_cell(int s, __be32 **cellp); + +/* + * If BLK_DEV_INITRD, the fdt early init code will call this function, + * to be provided by the arch code. start and end are specified as + * physical addresses. + */ +#ifdef CONFIG_BLK_DEV_INITRD +extern void early_init_dt_setup_initrd_arch(unsigned long start, + unsigned long end); +#endif + +/* Early flat tree scan hooks */ +extern int early_init_dt_scan_root(unsigned long node, const char *uname, + int depth, void *data); /* Other Prototypes */ -extern void finish_device_tree(void); extern void unflatten_device_tree(void); extern void early_init_devtree(void *); -extern int machine_is_compatible(const char *compat); -extern void print_properties(struct device_node *node); -extern int prom_n_intr_cells(struct device_node* np); -extern void prom_get_irq_senses(unsigned char *senses, int off, int max); -extern int prom_add_property(struct device_node* np, struct property* prop); -extern int prom_remove_property(struct device_node *np, struct property *prop); -extern int prom_update_property(struct device_node *np, - struct property *newprop, - struct property *oldprop); #endif /* __ASSEMBLY__ */ #endif /* _LINUX_OF_FDT_H */ diff --git a/include/linux/spi/dw_spi.h b/include/linux/spi/dw_spi.h index 51b3e77..cc813f9 100644 --- a/include/linux/spi/dw_spi.h +++ b/include/linux/spi/dw_spi.h @@ -90,6 +90,7 @@ struct dw_spi { unsigned long paddr; u32 iolen; int irq; + u32 fifo_len; /* depth of the FIFO buffer */ u32 max_freq; /* max bus freq supported */ u16 bus_num; @@ -171,6 +172,10 @@ static inline void spi_chip_sel(struct dw_spi *dws, u16 cs) { if (cs > dws->num_cs) return; + + if (dws->cs_control) + dws->cs_control(1); + dw_writel(dws, ser, 1 << cs); } diff --git a/include/linux/virtio.h b/include/linux/virtio.h index 057a2e0..f508c65 100644 --- a/include/linux/virtio.h +++ b/include/linux/virtio.h @@ -51,6 +51,9 @@ struct virtqueue { * This re-enables callbacks; it returns "false" if there are pending * buffers in the queue, to detect a possible race between the driver * checking for more work, and enabling callbacks. + * @detach_unused_buf: detach first unused buffer + * vq: the struct virtqueue we're talking about. + * Returns NULL or the "data" token handed to add_buf * * Locking rules are straightforward: the driver is responsible for * locking. No two operations may be invoked simultaneously, with the exception @@ -71,6 +74,7 @@ struct virtqueue_ops { void (*disable_cb)(struct virtqueue *vq); bool (*enable_cb)(struct virtqueue *vq); + void *(*detach_unused_buf)(struct virtqueue *vq); }; /** diff --git a/include/linux/virtio_balloon.h b/include/linux/virtio_balloon.h index 1418f04..a50ecd1 100644 --- a/include/linux/virtio_balloon.h +++ b/include/linux/virtio_balloon.h @@ -7,6 +7,7 @@ /* The feature bitmap for virtio balloon */ #define VIRTIO_BALLOON_F_MUST_TELL_HOST 0 /* Tell before reclaiming pages */ +#define VIRTIO_BALLOON_F_STATS_VQ 1 /* Memory Stats virtqueue */ /* Size of a PFN in the balloon interface. */ #define VIRTIO_BALLOON_PFN_SHIFT 12 @@ -18,4 +19,18 @@ struct virtio_balloon_config /* Number of pages we've actually got in balloon. */ __le32 actual; }; + +#define VIRTIO_BALLOON_S_SWAP_IN 0 /* Amount of memory swapped in */ +#define VIRTIO_BALLOON_S_SWAP_OUT 1 /* Amount of memory swapped out */ +#define VIRTIO_BALLOON_S_MAJFLT 2 /* Number of major faults */ +#define VIRTIO_BALLOON_S_MINFLT 3 /* Number of minor faults */ +#define VIRTIO_BALLOON_S_MEMFREE 4 /* Total amount of free memory */ +#define VIRTIO_BALLOON_S_MEMTOT 5 /* Total amount of memory */ +#define VIRTIO_BALLOON_S_NR 6 + +struct virtio_balloon_stat { + u16 tag; + u64 val; +} __attribute__((packed)); + #endif /* _LINUX_VIRTIO_BALLOON_H */ diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h index fd294c5..e52029e 100644 --- a/include/linux/virtio_blk.h +++ b/include/linux/virtio_blk.h @@ -15,6 +15,7 @@ #define VIRTIO_BLK_F_BLK_SIZE 6 /* Block size of disk is available*/ #define VIRTIO_BLK_F_SCSI 7 /* Supports scsi command passthru */ #define VIRTIO_BLK_F_FLUSH 9 /* Cache flush command support */ +#define VIRTIO_BLK_F_TOPOLOGY 10 /* Topology information is available */ struct virtio_blk_config { /* The capacity (in 512-byte sectors). */ @@ -29,8 +30,20 @@ struct virtio_blk_config { __u8 heads; __u8 sectors; } geometry; + /* block size of device (if VIRTIO_BLK_F_BLK_SIZE) */ __u32 blk_size; + + /* the next 4 entries are guarded by VIRTIO_BLK_F_TOPOLOGY */ + /* exponent for physical block per logical block. */ + __u8 physical_block_exp; + /* alignment offset in logical blocks. */ + __u8 alignment_offset; + /* minimum I/O size without performance penalty in logical blocks. */ + __u16 min_io_size; + /* optimal sustained I/O size in logical blocks. */ + __u32 opt_io_size; + } __attribute__((packed)); /* diff --git a/include/linux/virtio_console.h b/include/linux/virtio_console.h index fe88517..ae4f039 100644 --- a/include/linux/virtio_console.h +++ b/include/linux/virtio_console.h @@ -3,19 +3,45 @@ #include <linux/types.h> #include <linux/virtio_ids.h> #include <linux/virtio_config.h> -/* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so - * anyone can use the definitions to implement compatible drivers/servers. */ +/* + * This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so + * anyone can use the definitions to implement compatible drivers/servers. + * + * Copyright (C) Red Hat, Inc., 2009, 2010 + */ /* Feature bits */ #define VIRTIO_CONSOLE_F_SIZE 0 /* Does host provide console size? */ +#define VIRTIO_CONSOLE_F_MULTIPORT 1 /* Does host provide multiple ports? */ struct virtio_console_config { /* colums of the screens */ __u16 cols; /* rows of the screens */ __u16 rows; + /* max. number of ports this device can hold */ + __u32 max_nr_ports; + /* number of ports added so far */ + __u32 nr_ports; } __attribute__((packed)); +/* + * A message that's passed between the Host and the Guest for a + * particular port. + */ +struct virtio_console_control { + __u32 id; /* Port number */ + __u16 event; /* The kind of control event (see below) */ + __u16 value; /* Extra information for the key */ +}; + +/* Some events for control messages */ +#define VIRTIO_CONSOLE_PORT_READY 0 +#define VIRTIO_CONSOLE_CONSOLE_PORT 1 +#define VIRTIO_CONSOLE_RESIZE 2 +#define VIRTIO_CONSOLE_PORT_OPEN 3 +#define VIRTIO_CONSOLE_PORT_NAME 4 +#define VIRTIO_CONSOLE_PORT_REMOVE 5 #ifdef __KERNEL__ int __init virtio_cons_early_init(int (*put_chars)(u32, const char *, int)); diff --git a/kernel/kfifo.c b/kernel/kfifo.c index 498cabb..35edbe2 100644 --- a/kernel/kfifo.c +++ b/kernel/kfifo.c @@ -80,7 +80,7 @@ int kfifo_alloc(struct kfifo *fifo, unsigned int size, gfp_t gfp_mask) buffer = kmalloc(size, gfp_mask); if (!buffer) { - _kfifo_init(fifo, 0, 0); + _kfifo_init(fifo, NULL, 0); return -ENOMEM; } @@ -97,6 +97,7 @@ EXPORT_SYMBOL(kfifo_alloc); void kfifo_free(struct kfifo *fifo) { kfree(fifo->buffer); + _kfifo_init(fifo, NULL, 0); } EXPORT_SYMBOL(kfifo_free); diff --git a/kernel/perf_event.c b/kernel/perf_event.c index 2b19297..2ae7409 100644 --- a/kernel/perf_event.c +++ b/kernel/perf_event.c @@ -3259,8 +3259,6 @@ static void perf_event_task_output(struct perf_event *event, task_event->event_id.tid = perf_event_tid(event, task); task_event->event_id.ptid = perf_event_tid(event, current); - task_event->event_id.time = perf_clock(); - perf_output_put(&handle, task_event->event_id); perf_output_end(&handle); @@ -3268,7 +3266,7 @@ static void perf_event_task_output(struct perf_event *event, static int perf_event_task_match(struct perf_event *event) { - if (event->state != PERF_EVENT_STATE_ACTIVE) + if (event->state < PERF_EVENT_STATE_INACTIVE) return 0; if (event->cpu != -1 && event->cpu != smp_processor_id()) @@ -3300,7 +3298,7 @@ static void perf_event_task_event(struct perf_task_event *task_event) cpuctx = &get_cpu_var(perf_cpu_context); perf_event_task_ctx(&cpuctx->ctx, task_event); if (!ctx) - ctx = rcu_dereference(task_event->task->perf_event_ctxp); + ctx = rcu_dereference(current->perf_event_ctxp); if (ctx) perf_event_task_ctx(ctx, task_event); put_cpu_var(perf_cpu_context); @@ -3331,6 +3329,7 @@ static void perf_event_task(struct task_struct *task, /* .ppid */ /* .tid */ /* .ptid */ + .time = perf_clock(), }, }; @@ -3380,7 +3379,7 @@ static void perf_event_comm_output(struct perf_event *event, static int perf_event_comm_match(struct perf_event *event) { - if (event->state != PERF_EVENT_STATE_ACTIVE) + if (event->state < PERF_EVENT_STATE_INACTIVE) return 0; if (event->cpu != -1 && event->cpu != smp_processor_id()) @@ -3500,7 +3499,7 @@ static void perf_event_mmap_output(struct perf_event *event, static int perf_event_mmap_match(struct perf_event *event, struct perf_mmap_event *mmap_event) { - if (event->state != PERF_EVENT_STATE_ACTIVE) + if (event->state < PERF_EVENT_STATE_INACTIVE) return 0; if (event->cpu != -1 && event->cpu != smp_processor_id()) diff --git a/kernel/sys.c b/kernel/sys.c index 26a6b73..18bde97 100644 --- a/kernel/sys.c +++ b/kernel/sys.c @@ -222,6 +222,7 @@ SYSCALL_DEFINE2(getpriority, int, which, int, who) if (which > PRIO_USER || which < PRIO_PROCESS) return -EINVAL; + rcu_read_lock(); read_lock(&tasklist_lock); switch (which) { case PRIO_PROCESS: @@ -267,6 +268,7 @@ SYSCALL_DEFINE2(getpriority, int, which, int, who) } out_unlock: read_unlock(&tasklist_lock); + rcu_read_unlock(); return retval; } @@ -156,10 +156,12 @@ static int sub_alloc(struct idr *idp, int *starting_id, struct idr_layer **pa) id = (id | ((1 << (IDR_BITS * l)) - 1)) + 1; /* if already at the top layer, we need to grow */ - if (!(p = pa[l])) { + if (id >= 1 << (idp->layers * IDR_BITS)) { *starting_id = id; return IDR_NEED_TO_GROW; } + p = pa[l]; + BUG_ON(!p); /* If we need to go up one layer, continue the * loop; otherwise, restart from the top. diff --git a/mm/migrate.c b/mm/migrate.c index 9a0db5b..880bd59 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -1002,33 +1002,27 @@ static int do_pages_stat(struct mm_struct *mm, unsigned long nr_pages, #define DO_PAGES_STAT_CHUNK_NR 16 const void __user *chunk_pages[DO_PAGES_STAT_CHUNK_NR]; int chunk_status[DO_PAGES_STAT_CHUNK_NR]; - unsigned long i, chunk_nr = DO_PAGES_STAT_CHUNK_NR; - int err; - for (i = 0; i < nr_pages; i += chunk_nr) { - if (chunk_nr > nr_pages - i) - chunk_nr = nr_pages - i; + while (nr_pages) { + unsigned long chunk_nr; - err = copy_from_user(chunk_pages, &pages[i], - chunk_nr * sizeof(*chunk_pages)); - if (err) { - err = -EFAULT; - goto out; - } + chunk_nr = nr_pages; + if (chunk_nr > DO_PAGES_STAT_CHUNK_NR) + chunk_nr = DO_PAGES_STAT_CHUNK_NR; + + if (copy_from_user(chunk_pages, pages, chunk_nr * sizeof(*chunk_pages))) + break; do_pages_stat_array(mm, chunk_nr, chunk_pages, chunk_status); - err = copy_to_user(&status[i], chunk_status, - chunk_nr * sizeof(*chunk_status)); - if (err) { - err = -EFAULT; - goto out; - } - } - err = 0; + if (copy_to_user(status, chunk_status, chunk_nr * sizeof(*status))) + break; -out: - return err; + pages += chunk_nr; + status += chunk_nr; + nr_pages -= chunk_nr; + } + return nr_pages ? -EFAULT : 0; } /* diff --git a/mm/oom_kill.c b/mm/oom_kill.c index f52481b..2370504 100644 --- a/mm/oom_kill.c +++ b/mm/oom_kill.c @@ -459,6 +459,8 @@ static int oom_kill_process(struct task_struct *p, gfp_t gfp_mask, int order, list_for_each_entry(c, &p->children, sibling) { if (c->mm == p->mm) continue; + if (mem && !task_in_mem_cgroup(c, mem)) + continue; if (!oom_kill_task(c)) return 0; } diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c index fc6ec1e..280529a 100644 --- a/net/bluetooth/hidp/core.c +++ b/net/bluetooth/hidp/core.c @@ -313,10 +313,21 @@ static int hidp_send_report(struct hidp_session *session, struct hid_report *rep return hidp_queue_report(session, buf, rsize); } -static int hidp_output_raw_report(struct hid_device *hid, unsigned char *data, size_t count) +static int hidp_output_raw_report(struct hid_device *hid, unsigned char *data, size_t count, + unsigned char report_type) { - if (hidp_send_ctrl_message(hid->driver_data, - HIDP_TRANS_SET_REPORT | HIDP_DATA_RTYPE_FEATURE, + switch (report_type) { + case HID_FEATURE_REPORT: + report_type = HIDP_TRANS_SET_REPORT | HIDP_DATA_RTYPE_FEATURE; + break; + case HID_OUTPUT_REPORT: + report_type = HIDP_TRANS_DATA | HIDP_DATA_RTYPE_OUPUT; + break; + default: + return -EINVAL; + } + + if (hidp_send_ctrl_message(hid->driver_data, report_type, data, count)) return -ENOMEM; return count; diff --git a/net/core/dev.c b/net/core/dev.c index be9924f..ec87421 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2761,7 +2761,7 @@ gro_result_t napi_frags_finish(struct napi_struct *napi, struct sk_buff *skb, switch (ret) { case GRO_NORMAL: case GRO_HELD: - skb->protocol = eth_type_trans(skb, napi->dev); + skb->protocol = eth_type_trans(skb, skb->dev); if (ret == GRO_HELD) skb_gro_pull(skb, -ETH_HLEN); diff --git a/net/core/ethtool.c b/net/core/ethtool.c index d8aee58..236a998 100644 --- a/net/core/ethtool.c +++ b/net/core/ethtool.c @@ -927,6 +927,7 @@ int dev_ethtool(struct net *net, struct ifreq *ifr) case ETHTOOL_GPERMADDR: case ETHTOOL_GUFO: case ETHTOOL_GGSO: + case ETHTOOL_GGRO: case ETHTOOL_GFLAGS: case ETHTOOL_GPFLAGS: case ETHTOOL_GRXFH: diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c index fbc1c74..099c753 100644 --- a/net/core/net-sysfs.c +++ b/net/core/net-sysfs.c @@ -410,7 +410,8 @@ static ssize_t wireless_show(struct device *d, char *buf, const struct iw_statistics *iw; ssize_t ret = -EINVAL; - rtnl_lock(); + if (!rtnl_trylock()) + return restart_syscall(); if (dev_isalive(dev)) { iw = get_wireless_stats(dev); if (iw) diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c index 040c4f0..26dec2b 100644 --- a/net/ipv4/devinet.c +++ b/net/ipv4/devinet.c @@ -1317,14 +1317,19 @@ static int devinet_sysctl_forward(ctl_table *ctl, int write, { int *valp = ctl->data; int val = *valp; + loff_t pos = *ppos; int ret = proc_dointvec(ctl, write, buffer, lenp, ppos); if (write && *valp != val) { struct net *net = ctl->extra2; if (valp != &IPV4_DEVCONF_DFLT(net, FORWARDING)) { - if (!rtnl_trylock()) + if (!rtnl_trylock()) { + /* Restore the original values before restarting */ + *valp = val; + *ppos = pos; return restart_syscall(); + } if (valp == &IPV4_DEVCONF_ALL(net, FORWARDING)) { inet_forward_change(net); } else if (*valp) { diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c index 76c0840..a42f658 100644 --- a/net/ipv4/igmp.c +++ b/net/ipv4/igmp.c @@ -946,7 +946,6 @@ int igmp_rcv(struct sk_buff *skb) break; case IGMP_HOST_MEMBERSHIP_REPORT: case IGMPV2_HOST_MEMBERSHIP_REPORT: - case IGMPV3_HOST_MEMBERSHIP_REPORT: /* Is it our report looped back? */ if (skb_rtable(skb)->fl.iif == 0) break; @@ -960,6 +959,7 @@ int igmp_rcv(struct sk_buff *skb) in_dev_put(in_dev); return pim_rcv_v1(skb); #endif + case IGMPV3_HOST_MEMBERSHIP_REPORT: case IGMP_DVMRP: case IGMP_TRACE: case IGMP_HOST_LEAVE_MESSAGE: diff --git a/net/ipv4/ipcomp.c b/net/ipv4/ipcomp.c index 38fbf04..544ce08 100644 --- a/net/ipv4/ipcomp.c +++ b/net/ipv4/ipcomp.c @@ -124,16 +124,12 @@ static int ipcomp4_init_state(struct xfrm_state *x) if (x->props.mode == XFRM_MODE_TUNNEL) { err = ipcomp_tunnel_attach(x); if (err) - goto error_tunnel; + goto out; } err = 0; out: return err; - -error_tunnel: - ipcomp_destroy(x); - goto out; } static const struct xfrm_type ipcomp_type = { diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 28e0296..3fddc69 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -5783,11 +5783,9 @@ int tcp_rcv_state_process(struct sock *sk, struct sk_buff *skb, /* tcp_ack considers this ACK as duplicate * and does not calculate rtt. - * Fix it at least with timestamps. + * Force it here. */ - if (tp->rx_opt.saw_tstamp && - tp->rx_opt.rcv_tsecr && !tp->srtt) - tcp_ack_saw_tstamp(sk, 0); + tcp_ack_update_rtt(sk, 0, 0); if (tp->rx_opt.tstamp_ok) tp->advmss -= TCPOLEN_TSTAMP_ALIGNED; diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index de7a194..143791d 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -502,8 +502,11 @@ static int addrconf_fixup_forwarding(struct ctl_table *table, int *p, int old) if (p == &net->ipv6.devconf_dflt->forwarding) return 0; - if (!rtnl_trylock()) + if (!rtnl_trylock()) { + /* Restore the original values before restarting */ + *p = old; return restart_syscall(); + } if (p == &net->ipv6.devconf_all->forwarding) { __s32 newf = net->ipv6.devconf_all->forwarding; @@ -4028,12 +4031,15 @@ int addrconf_sysctl_forward(ctl_table *ctl, int write, { int *valp = ctl->data; int val = *valp; + loff_t pos = *ppos; int ret; ret = proc_dointvec(ctl, write, buffer, lenp, ppos); if (write) ret = addrconf_fixup_forwarding(ctl, valp, val); + if (ret) + *ppos = pos; return ret; } @@ -4075,8 +4081,11 @@ static int addrconf_disable_ipv6(struct ctl_table *table, int *p, int old) if (p == &net->ipv6.devconf_dflt->disable_ipv6) return 0; - if (!rtnl_trylock()) + if (!rtnl_trylock()) { + /* Restore the original values before restarting */ + *p = old; return restart_syscall(); + } if (p == &net->ipv6.devconf_all->disable_ipv6) { __s32 newf = net->ipv6.devconf_all->disable_ipv6; @@ -4095,12 +4104,15 @@ int addrconf_sysctl_disable(ctl_table *ctl, int write, { int *valp = ctl->data; int val = *valp; + loff_t pos = *ppos; int ret; ret = proc_dointvec(ctl, write, buffer, lenp, ppos); if (write) ret = addrconf_disable_ipv6(ctl, valp, val); + if (ret) + *ppos = pos; return ret; } diff --git a/net/ipv6/ipcomp6.c b/net/ipv6/ipcomp6.c index 2f2a5ca..002e6ee 100644 --- a/net/ipv6/ipcomp6.c +++ b/net/ipv6/ipcomp6.c @@ -154,16 +154,12 @@ static int ipcomp6_init_state(struct xfrm_state *x) if (x->props.mode == XFRM_MODE_TUNNEL) { err = ipcomp6_tunnel_attach(x); if (err) - goto error_tunnel; + goto out; } err = 0; out: return err; -error_tunnel: - ipcomp_destroy(x); - - goto out; } static const struct xfrm_type ipcomp6_type = diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 1f2db64..22f0c2a 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -647,7 +647,7 @@ static void ieee80211_rx_mgmt_probe_req(struct ieee80211_sub_if_data *sdata, } if (pos[1] != 0 && (pos[1] != ifibss->ssid_len || - !memcmp(pos + 2, ifibss->ssid, ifibss->ssid_len))) { + memcmp(pos + 2, ifibss->ssid, ifibss->ssid_len))) { /* Ignore ProbeReq for foreign SSID */ return; } diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c index b9007f8..12a2bff 100644 --- a/net/mac80211/rate.c +++ b/net/mac80211/rate.c @@ -245,6 +245,9 @@ void rate_control_get_rate(struct ieee80211_sub_if_data *sdata, info->control.rates[i].count = 1; } + if (sdata->local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL) + return; + if (sta && sdata->force_unicast_rateidx > -1) { info->control.rates[0].idx = sdata->force_unicast_rateidx; } else { diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index f934c96..bc17cf7 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -439,6 +439,16 @@ static int __ieee80211_start_scan(struct ieee80211_sub_if_data *sdata, if (local->scan_req) return -EBUSY; + if (req != local->int_scan_req && + sdata->vif.type == NL80211_IFTYPE_STATION && + !list_empty(&ifmgd->work_list)) { + /* actually wait for the work it's doing to finish/time out */ + set_bit(IEEE80211_STA_REQ_SCAN, &ifmgd->request); + local->scan_req = req; + local->scan_sdata = sdata; + return 0; + } + if (local->ops->hw_scan) { u8 *ies; @@ -463,14 +473,6 @@ static int __ieee80211_start_scan(struct ieee80211_sub_if_data *sdata, local->scan_req = req; local->scan_sdata = sdata; - if (req != local->int_scan_req && - sdata->vif.type == NL80211_IFTYPE_STATION && - !list_empty(&ifmgd->work_list)) { - /* actually wait for the work it's doing to finish/time out */ - set_bit(IEEE80211_STA_REQ_SCAN, &ifmgd->request); - return 0; - } - if (local->ops->hw_scan) __set_bit(SCAN_HW_SCANNING, &local->scanning); else diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c index b36cc34..f445ea1 100644 --- a/net/xfrm/xfrm_state.c +++ b/net/xfrm/xfrm_state.c @@ -1102,7 +1102,7 @@ static struct xfrm_state *xfrm_state_clone(struct xfrm_state *orig, int *errp) int err = -ENOMEM; struct xfrm_state *x = xfrm_state_alloc(net); if (!x) - goto error; + goto out; memcpy(&x->id, &orig->id, sizeof(x->id)); memcpy(&x->sel, &orig->sel, sizeof(x->sel)); @@ -1160,16 +1160,10 @@ static struct xfrm_state *xfrm_state_clone(struct xfrm_state *orig, int *errp) return x; error: + xfrm_state_put(x); +out: if (errp) *errp = err; - if (x) { - kfree(x->aalg); - kfree(x->ealg); - kfree(x->calg); - kfree(x->encap); - kfree(x->coaddr); - } - kfree(x); return NULL; } diff --git a/scripts/.gitignore b/scripts/.gitignore index 52cab46a..c5d5db5 100644 --- a/scripts/.gitignore +++ b/scripts/.gitignore @@ -6,5 +6,4 @@ kallsyms pnmtologo bin2c unifdef -binoffset ihex2fw diff --git a/scripts/binoffset.c b/scripts/binoffset.c deleted file mode 100644 index 1a2e39b..0000000 --- a/scripts/binoffset.c +++ /dev/null @@ -1,163 +0,0 @@ -/*************************************************************************** - * binoffset.c - * (C) 2002 Randy Dunlap <rdunlap@xenotime.net> - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - -# binoffset.c: -# - searches a (binary) file for a specified (binary) pattern -# - returns the offset of the located pattern or ~0 if not found -# - exits with exit status 0 normally or non-0 if pattern is not found -# or any other error occurs. - -****************************************************************/ - -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <errno.h> -#include <unistd.h> -#include <fcntl.h> -#include <sys/types.h> -#include <sys/stat.h> -#include <sys/mman.h> - -#define VERSION "0.1" -#define BUF_SIZE (16 * 1024) -#define PAT_SIZE 100 - -char *progname; -char *inputname; -int inputfd; -unsigned int bix; /* buf index */ -unsigned char patterns [PAT_SIZE] = {0}; /* byte-sized pattern array */ -int pat_len; /* actual number of pattern bytes */ -unsigned char *madr; /* mmap address */ -size_t filesize; -int num_matches = 0; -off_t firstloc = 0; - -void usage (void) -{ - fprintf (stderr, "%s ver. %s\n", progname, VERSION); - fprintf (stderr, "usage: %s filename pattern_bytes\n", - progname); - fprintf (stderr, " [prints location of pattern_bytes in file]\n"); - exit (1); -} - -void get_pattern (int pat_count, char *pats []) -{ - int ix, err, tmp; - -#ifdef DEBUG - fprintf (stderr,"get_pattern: count = %d\n", pat_count); - for (ix = 0; ix < pat_count; ix++) - fprintf (stderr, " pat # %d: [%s]\n", ix, pats[ix]); -#endif - - for (ix = 0; ix < pat_count; ix++) { - tmp = 0; - err = sscanf (pats[ix], "%5i", &tmp); - if (err != 1 || tmp > 0xff) { - fprintf (stderr, "pattern or value error in pattern # %d [%s]\n", - ix, pats[ix]); - usage (); - } - patterns [ix] = tmp; - } - pat_len = pat_count; -} - -void search_pattern (void) -{ - for (bix = 0; bix < filesize; bix++) { - if (madr[bix] == patterns[0]) { - if (memcmp (&madr[bix], patterns, pat_len) == 0) { - if (num_matches == 0) - firstloc = bix; - num_matches++; - } - } - } -} - -#ifdef NOTDEF -size_t get_filesize (int fd) -{ - off_t end_off = lseek (fd, 0, SEEK_END); - lseek (fd, 0, SEEK_SET); - return (size_t) end_off; -} -#endif - -size_t get_filesize (int fd) -{ - int err; - struct stat stat; - - err = fstat (fd, &stat); - fprintf (stderr, "filesize: %ld\n", err < 0 ? (long)err : stat.st_size); - if (err < 0) - return err; - return (size_t) stat.st_size; -} - -int main (int argc, char *argv []) -{ - progname = argv[0]; - - if (argc < 3) - usage (); - - get_pattern (argc - 2, argv + 2); - - inputname = argv[1]; - - inputfd = open (inputname, O_RDONLY); - if (inputfd == -1) { - fprintf (stderr, "%s: cannot open '%s'\n", - progname, inputname); - exit (3); - } - - filesize = get_filesize (inputfd); - - madr = mmap (0, filesize, PROT_READ, MAP_PRIVATE, inputfd, 0); - if (madr == MAP_FAILED) { - fprintf (stderr, "mmap error = %d\n", errno); - close (inputfd); - exit (4); - } - - search_pattern (); - - if (munmap (madr, filesize)) - fprintf (stderr, "munmap error = %d\n", errno); - - if (close (inputfd)) - fprintf (stderr, "%s: error %d closing '%s'\n", - progname, errno, inputname); - - fprintf (stderr, "number of pattern matches = %d\n", num_matches); - if (num_matches == 0) - firstloc = ~0; - printf ("%ld\n", firstloc); - fprintf (stderr, "%ld\n", firstloc); - - exit (num_matches ? 0 : 2); -} - -/* end binoffset.c */ diff --git a/scripts/extract-ikconfig b/scripts/extract-ikconfig index de233ff..37f30d3 100755 --- a/scripts/extract-ikconfig +++ b/scripts/extract-ikconfig @@ -1,92 +1,53 @@ #!/bin/sh -# extracts .config info from a [b]zImage file -# uses: binoffset (new), dd, zcat, strings, grep -# $arg1 is [b]zImage filename - -binoffset="./scripts/binoffset" -test -e $binoffset || cc -o $binoffset ./scripts/binoffset.c || exit 1 - -IKCFG_ST="0x49 0x4b 0x43 0x46 0x47 0x5f 0x53 0x54" -IKCFG_ED="0x49 0x4b 0x43 0x46 0x47 0x5f 0x45 0x44" -dump_config() { - file="$1" - - start=`$binoffset $file $IKCFG_ST 2>/dev/null` - [ "$?" != "0" ] && start="-1" - if [ "$start" -eq "-1" ]; then - return - fi - end=`$binoffset $file $IKCFG_ED 2>/dev/null` - [ "$?" != "0" ] && end="-1" - if [ "$end" -eq "-1" ]; then - return - fi - - start=`expr $start + 8` - size=`expr $end - $start` - - dd if="$file" ibs=1 skip="$start" count="$size" 2>/dev/null | zcat - - clean_up - exit 0 -} - - -usage() -{ - echo " usage: extract-ikconfig [b]zImage_filename" -} - -clean_up() +# ---------------------------------------------------------------------- +# extract-ikconfig - Extract the .config file from a kernel image +# +# This will only work when the kernel was compiled with CONFIG_IKCONFIG. +# +# The obscure use of the "tr" filter is to work around older versions of +# "grep" that report the byte offset of the line instead of the pattern. +# +# (c) 2009, Dick Streefland <dick@streefland.net> +# Licensed under the terms of the GNU General Public License. +# ---------------------------------------------------------------------- + +gz1='\037\213\010' +gz2='01' +cf1='IKCFG_ST\037\213\010' +cf2='0123456789' + +dump_config() { - if [ "$TMPFILE" != "" ]; then - rm -f $TMPFILE + if pos=`tr "$cf1\n$cf2" "\n$cf2=" < "$1" | grep -abo "^$cf2"` + then + pos=${pos%%:*} + tail -c+$(($pos+8)) "$1" | zcat -q + exit 0 fi } -if [ $# -lt 1 ] +# Check invocation: +me=${0##*/} +img=$1 +if [ $# -ne 1 -o ! -s "$img" ] then - usage - exit 1 + echo "Usage: $me <kernel-image>" >&2 + exit 2 fi -TMPFILE=`mktemp -t ikconfig-XXXXXX` || exit 1 -image="$1" - -# vmlinux: Attempt to dump the configuration from the file directly -dump_config "$image" - -GZHDR1="0x1f 0x8b 0x08 0x00" -GZHDR2="0x1f 0x8b 0x08 0x08" - -ELFHDR="0x7f 0x45 0x4c 0x46" - -# vmlinux.gz: Check for a compressed images -off=`$binoffset "$image" $GZHDR1 2>/dev/null` -[ "$?" != "0" ] && off="-1" -if [ "$off" -eq "-1" ]; then - off=`$binoffset "$image" $GZHDR2 2>/dev/null` - [ "$?" != "0" ] && off="-1" -fi -if [ "$off" -eq "0" ]; then - zcat <"$image" >"$TMPFILE" - dump_config "$TMPFILE" -elif [ "$off" -ne "-1" ]; then - (dd ibs="$off" skip=1 count=0 && dd bs=512k) <"$image" 2>/dev/null | \ - zcat >"$TMPFILE" - dump_config "$TMPFILE" - -# check if this is simply an ELF file -else - off=`$binoffset "$image" $ELFHDR 2>/dev/null` - [ "$?" != "0" ] && off="-1" - if [ "$off" -eq "0" ]; then - dump_config "$image" - fi -fi - -echo "ERROR: Unable to extract kernel configuration information." -echo " This kernel image may not have the config info." - -clean_up +# Initial attempt for uncompressed images or objects: +dump_config "$img" + +# That didn't work, so decompress and try again: +tmp=/tmp/ikconfig$$ +trap "rm -f $tmp" 0 +for pos in `tr "$gz1\n$gz2" "\n$gz2=" < "$img" | grep -abo "^$gz2"` +do + pos=${pos%%:*} + tail -c+$pos "$img" | zcat 2> /dev/null > $tmp + dump_config $tmp +done + +# Bail out: +echo "$me: Cannot find kernel config." >&2 exit 1 diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile index 999e8a7..186c466 100644 --- a/scripts/kconfig/Makefile +++ b/scripts/kconfig/Makefile @@ -30,8 +30,17 @@ silentoldconfig: $(obj)/conf $(Q)mkdir -p include/generated $< -s $(Kconfig) +# if no path is given, then use src directory to find file +ifdef LSMOD +LSMOD_F := $(LSMOD) +ifeq ($(findstring /,$(LSMOD)),) + LSMOD_F := $(objtree)/$(LSMOD) +endif +endif + localmodconfig: $(obj)/streamline_config.pl $(obj)/conf - $(Q)perl $< $(srctree) $(Kconfig) > .tmp.config + $(Q)mkdir -p include/generated + $(Q)perl $< $(srctree) $(Kconfig) $(LSMOD_F) > .tmp.config $(Q)if [ -f .config ]; then \ cmp -s .tmp.config .config || \ (mv -f .config .config.old.1; \ @@ -45,7 +54,8 @@ localmodconfig: $(obj)/streamline_config.pl $(obj)/conf $(Q)rm -f .tmp.config localyesconfig: $(obj)/streamline_config.pl $(obj)/conf - $(Q)perl $< $(srctree) $(Kconfig) > .tmp.config + $(Q)mkdir -p include/generated + $(Q)perl $< $(srctree) $(Kconfig) $(LSMOD_F) > .tmp.config $(Q)sed -i s/=m/=y/ .tmp.config $(Q)if [ -f .config ]; then \ cmp -s .tmp.config .config || \ diff --git a/scripts/kconfig/streamline_config.pl b/scripts/kconfig/streamline_config.pl index 0d80082..afbd54a 100644 --- a/scripts/kconfig/streamline_config.pl +++ b/scripts/kconfig/streamline_config.pl @@ -113,6 +113,7 @@ find_config; # Get the build source and top level Kconfig file (passed in) my $ksource = $ARGV[0]; my $kconfig = $ARGV[1]; +my $lsmod_file = $ARGV[2]; my @makefiles = `find $ksource -name Makefile`; my %depends; @@ -121,6 +122,8 @@ my %prompts; my %objects; my $var; my $cont = 0; +my $iflevel = 0; +my @ifdeps; # prevent recursion my %read_kconfigs; @@ -146,6 +149,15 @@ sub read_kconfig { $state = "NEW"; $config = $1; + for (my $i = 0; $i < $iflevel; $i++) { + if ($i) { + $depends{$config} .= " " . $ifdeps[$i]; + } else { + $depends{$config} = $ifdeps[$i]; + } + $state = "DEP"; + } + # collect the depends for the config } elsif ($state eq "NEW" && /^\s*depends\s+on\s+(.*)$/) { $state = "DEP"; @@ -166,6 +178,21 @@ sub read_kconfig { # note if the config has a prompt $prompt{$config} = 1; + # Check for if statements + } elsif (/^if\s+(.*\S)\s*$/) { + my $deps = $1; + # remove beginning and ending non text + $deps =~ s/^[^a-zA-Z0-9_]*//; + $deps =~ s/[^a-zA-Z0-9_]*$//; + + my @deps = split /[^a-zA-Z0-9_]+/, $deps; + + $ifdeps[$iflevel++] = join ':', @deps; + + } elsif (/^endif/) { + + $iflevel-- if ($iflevel); + # stop on "help" } elsif (/^\s*help\s*$/) { $state = "NONE"; @@ -237,8 +264,36 @@ foreach my $makefile (@makefiles) { my %modules; -# see what modules are loaded on this system -open(LIN,"/sbin/lsmod|") || die "Cant lsmod"; +if (defined($lsmod_file)) { + if ( ! -f $lsmod_file) { + die "$lsmod_file not found"; + } + if ( -x $lsmod_file) { + # the file is executable, run it + open(LIN, "$lsmod_file|"); + } else { + # Just read the contents + open(LIN, "$lsmod_file"); + } +} else { + + # see what modules are loaded on this system + my $lsmod; + + foreach $dir ( ("/sbin", "/bin", "/usr/sbin", "/usr/bin") ) { + if ( -x "$dir/lsmod" ) { + $lsmod = "$dir/lsmod"; + last; + } +} + if (!defined($lsmod)) { + # try just the path + $lsmod = "lsmod"; + } + + open(LIN,"$lsmod|") || die "Can not call lsmod with $lsmod"; +} + while (<LIN>) { next if (/^Module/); # Skip the first line. if (/^(\S+)/) { diff --git a/security/integrity/ima/ima_iint.c b/security/integrity/ima/ima_iint.c index 0d83edc..2d4d05d 100644 --- a/security/integrity/ima/ima_iint.c +++ b/security/integrity/ima/ima_iint.c @@ -63,12 +63,11 @@ int ima_inode_alloc(struct inode *inode) spin_lock(&ima_iint_lock); rc = radix_tree_insert(&ima_iint_store, (unsigned long)inode, iint); spin_unlock(&ima_iint_lock); + radix_tree_preload_end(); out: if (rc < 0) kmem_cache_free(iint_cache, iint); - radix_tree_preload_end(); - return rc; } diff --git a/security/selinux/ss/ebitmap.c b/security/selinux/ss/ebitmap.c index 68c7348..04b6145 100644 --- a/security/selinux/ss/ebitmap.c +++ b/security/selinux/ss/ebitmap.c @@ -128,7 +128,7 @@ int ebitmap_netlbl_export(struct ebitmap *ebmap, cmap_idx = delta / NETLBL_CATMAP_MAPSIZE; cmap_sft = delta % NETLBL_CATMAP_MAPSIZE; c_iter->bitmap[cmap_idx] - |= e_iter->maps[cmap_idx] << cmap_sft; + |= e_iter->maps[i] << cmap_sft; } e_iter = e_iter->next; } diff --git a/sound/aoa/fabrics/layout.c b/sound/aoa/fabrics/layout.c index 586965f..7a437da 100644 --- a/sound/aoa/fabrics/layout.c +++ b/sound/aoa/fabrics/layout.c @@ -768,7 +768,7 @@ static int check_codec(struct aoa_codec *codec, "required property %s not present\n", propname); return -ENODEV; } - if (*ref != codec->node->linux_phandle) { + if (*ref != codec->node->phandle) { printk(KERN_INFO "snd-aoa-fabric-layout: " "%s doesn't match!\n", propname); return -ENODEV; diff --git a/sound/ppc/awacs.c b/sound/ppc/awacs.c index 2e15646..b366793 100644 --- a/sound/ppc/awacs.c +++ b/sound/ppc/awacs.c @@ -751,8 +751,8 @@ static void snd_pmac_awacs_suspend(struct snd_pmac *chip) static void snd_pmac_awacs_resume(struct snd_pmac *chip) { - if (machine_is_compatible("PowerBook3,1") - || machine_is_compatible("PowerBook3,2")) { + if (of_machine_is_compatible("PowerBook3,1") + || of_machine_is_compatible("PowerBook3,2")) { msleep(100); snd_pmac_awacs_write_reg(chip, 1, chip->awacs_reg[1] & ~MASK_PAROUT); @@ -780,16 +780,16 @@ static void snd_pmac_awacs_resume(struct snd_pmac *chip) } #endif /* CONFIG_PM */ -#define IS_PM7500 (machine_is_compatible("AAPL,7500") \ - || machine_is_compatible("AAPL,8500") \ - || machine_is_compatible("AAPL,9500")) -#define IS_PM5500 (machine_is_compatible("AAPL,e411")) -#define IS_BEIGE (machine_is_compatible("AAPL,Gossamer")) -#define IS_IMAC1 (machine_is_compatible("PowerMac2,1")) -#define IS_IMAC2 (machine_is_compatible("PowerMac2,2") \ - || machine_is_compatible("PowerMac4,1")) -#define IS_G4AGP (machine_is_compatible("PowerMac3,1")) -#define IS_LOMBARD (machine_is_compatible("PowerBook1,1")) +#define IS_PM7500 (of_machine_is_compatible("AAPL,7500") \ + || of_machine_is_compatible("AAPL,8500") \ + || of_machine_is_compatible("AAPL,9500")) +#define IS_PM5500 (of_machine_is_compatible("AAPL,e411")) +#define IS_BEIGE (of_machine_is_compatible("AAPL,Gossamer")) +#define IS_IMAC1 (of_machine_is_compatible("PowerMac2,1")) +#define IS_IMAC2 (of_machine_is_compatible("PowerMac2,2") \ + || of_machine_is_compatible("PowerMac4,1")) +#define IS_G4AGP (of_machine_is_compatible("PowerMac3,1")) +#define IS_LOMBARD (of_machine_is_compatible("PowerBook1,1")) static int imac1, imac2; diff --git a/sound/ppc/burgundy.c b/sound/ppc/burgundy.c index 0accfe4..1f72e1c 100644 --- a/sound/ppc/burgundy.c +++ b/sound/ppc/burgundy.c @@ -582,7 +582,7 @@ static int snd_pmac_burgundy_detect_headphone(struct snd_pmac *chip) static void snd_pmac_burgundy_update_automute(struct snd_pmac *chip, int do_notify) { if (chip->auto_mute) { - int imac = machine_is_compatible("iMac"); + int imac = of_machine_is_compatible("iMac"); int reg, oreg; reg = oreg = snd_pmac_burgundy_rcb(chip, MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES); @@ -620,7 +620,7 @@ static void snd_pmac_burgundy_update_automute(struct snd_pmac *chip, int do_noti */ int __devinit snd_pmac_burgundy_init(struct snd_pmac *chip) { - int imac = machine_is_compatible("iMac"); + int imac = of_machine_is_compatible("iMac"); int i, err; /* Checks to see the chip is alive and kicking */ diff --git a/sound/ppc/pmac.c b/sound/ppc/pmac.c index 7bc492e..8508117 100644 --- a/sound/ppc/pmac.c +++ b/sound/ppc/pmac.c @@ -922,11 +922,11 @@ static void __devinit detect_byte_swap(struct snd_pmac *chip) } /* it seems the Pismo & iBook can't byte-swap in hardware. */ - if (machine_is_compatible("PowerBook3,1") || - machine_is_compatible("PowerBook2,1")) + if (of_machine_is_compatible("PowerBook3,1") || + of_machine_is_compatible("PowerBook2,1")) chip->can_byte_swap = 0 ; - if (machine_is_compatible("PowerBook2,1")) + if (of_machine_is_compatible("PowerBook2,1")) chip->can_duplex = 0; } @@ -959,11 +959,11 @@ static int __devinit snd_pmac_detect(struct snd_pmac *chip) chip->control_mask = MASK_IEPC | MASK_IEE | 0x11; /* default */ /* check machine type */ - if (machine_is_compatible("AAPL,3400/2400") - || machine_is_compatible("AAPL,3500")) + if (of_machine_is_compatible("AAPL,3400/2400") + || of_machine_is_compatible("AAPL,3500")) chip->is_pbook_3400 = 1; - else if (machine_is_compatible("PowerBook1,1") - || machine_is_compatible("AAPL,PowerBook1998")) + else if (of_machine_is_compatible("PowerBook1,1") + || of_machine_is_compatible("AAPL,PowerBook1998")) chip->is_pbook_G3 = 1; chip->node = of_find_node_by_name(NULL, "awacs"); sound = of_node_get(chip->node); @@ -1033,8 +1033,8 @@ static int __devinit snd_pmac_detect(struct snd_pmac *chip) } if (of_device_is_compatible(sound, "tumbler")) { chip->model = PMAC_TUMBLER; - chip->can_capture = machine_is_compatible("PowerMac4,2") - || machine_is_compatible("PowerBook4,1"); + chip->can_capture = of_machine_is_compatible("PowerMac4,2") + || of_machine_is_compatible("PowerBook4,1"); chip->can_duplex = 0; // chip->can_byte_swap = 0; /* FIXME: check this */ chip->num_freqs = ARRAY_SIZE(tumbler_freqs); diff --git a/sound/soc/fsl/efika-audio-fabric.c b/sound/soc/fsl/efika-audio-fabric.c index 3326e2a..1a5b8e0 100644 --- a/sound/soc/fsl/efika-audio-fabric.c +++ b/sound/soc/fsl/efika-audio-fabric.c @@ -55,7 +55,7 @@ static __init int efika_fabric_init(void) struct platform_device *pdev; int rc; - if (!machine_is_compatible("bplan,efika")) + if (!of_machine_is_compatible("bplan,efika")) return -ENODEV; card.platform = &mpc5200_audio_dma_platform; diff --git a/sound/soc/fsl/pcm030-audio-fabric.c b/sound/soc/fsl/pcm030-audio-fabric.c index b928ef7..6644cba 100644 --- a/sound/soc/fsl/pcm030-audio-fabric.c +++ b/sound/soc/fsl/pcm030-audio-fabric.c @@ -55,7 +55,7 @@ static __init int pcm030_fabric_init(void) struct platform_device *pdev; int rc; - if (!machine_is_compatible("phytec,pcm030")) + if (!of_machine_is_compatible("phytec,pcm030")) return -ENODEV; card.platform = &mpc5200_audio_dma_platform; diff --git a/tools/perf/util/probe-event.c b/tools/perf/util/probe-event.c index 29465d4..fde17b0 100644 --- a/tools/perf/util/probe-event.c +++ b/tools/perf/util/probe-event.c @@ -272,6 +272,7 @@ int synthesize_perf_probe_point(struct probe_point *pp) int ret; pp->probes[0] = buf = zalloc(MAX_CMDLEN); + pp->found = 1; if (!buf) die("Failed to allocate memory by zalloc."); if (pp->offset) { @@ -294,6 +295,7 @@ int synthesize_perf_probe_point(struct probe_point *pp) error: free(pp->probes[0]); pp->probes[0] = NULL; + pp->found = 0; } return ret; } @@ -455,6 +457,7 @@ void show_perf_probe_events(void) struct strlist *rawlist; struct str_node *ent; + memset(&pp, 0, sizeof(pp)); fd = open_kprobe_events(O_RDONLY, 0); rawlist = get_trace_kprobe_event_rawlist(fd); close(fd); |