pci: move microblaze and powerpc pci flag functions into asm-generic

Move separate microblaze and powerpc pci flag functions pci_set_flags,
pci_add_flags, and pci_has_flag into asm-generic/pci-bridge.h so other
archs can use them.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Michal Simek <monstr@monstr.eu>

3 files changed, 73 insertions, 106 deletions

diff --git a/arch/microblaze/include/asm/pci-bridge.h b/arch/microblaze/include/asm/pci-bridge.h
index 746df91..4cae1d5 100644
--- a/arch/microblaze/include/asm/pci-bridge.h
+++ b/arch/microblaze/include/asm/pci-bridge.h
@@ -10,31 +10,19 @@
 #include <linux/pci.h>
 #include <linux/list.h>
 #include <linux/ioport.h>
+#include <asm-generic/pci-bridge.h>
 
 struct device_node;
 
-enum {
-	/* Force re-assigning all resources (ignore firmware
-	 * setup completely)
-	 */
-	PCI_REASSIGN_ALL_RSRC	= 0x00000001,
-
-	/* Re-assign all bus numbers */
-	PCI_REASSIGN_ALL_BUS	= 0x00000002,
-
-	/* Do not try to assign, just use existing setup */
-	PCI_PROBE_ONLY		= 0x00000004,
-
-	/* Don't bother with ISA alignment unless the bridge has
-	 * ISA forwarding enabled
-	 */
-	PCI_CAN_SKIP_ISA_ALIGN	= 0x00000008,
-
-	/* Enable domain numbers in /proc */
-	PCI_ENABLE_PROC_DOMAINS	= 0x00000010,
-	/* ... except for domain 0 */
-	PCI_COMPAT_DOMAIN_0		= 0x00000020,
-};
+#ifdef CONFIG_PCI
+extern struct list_head hose_list;
+extern int pcibios_vaddr_is_ioport(void __iomem *address);
+#else
+static inline int pcibios_vaddr_is_ioport(void __iomem *address)
+{
+	return 0;
+}
+#endif
 
 /*
  * Structure of a PCI controller (host bridge)
@@ -164,40 +152,5 @@ extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev);
 extern void pcibios_free_controller(struct pci_controller *phb);
 extern void pcibios_setup_phb_resources(struct pci_controller *hose);
 
-#ifdef CONFIG_PCI
-extern unsigned int pci_flags;
-
-static inline void pci_set_flags(int flags)
-{
-	pci_flags = flags;
-}
-
-static inline void pci_add_flags(int flags)
-{
-	pci_flags |= flags;
-}
-
-static inline int pci_has_flag(int flag)
-{
-	return pci_flags & flag;
-}
-
-extern struct list_head hose_list;
-
-extern int pcibios_vaddr_is_ioport(void __iomem *address);
-#else
-static inline int pcibios_vaddr_is_ioport(void __iomem *address)
-{
-	return 0;
-}
-
-static inline void pci_set_flags(int flags) { }
-static inline void pci_add_flags(int flags) { }
-static inline int pci_has_flag(int flag)
-{
-	return 0;
-}
-#endif	/* CONFIG_PCI */
-
 #endif	/* __KERNEL__ */
 #endif	/* _ASM_MICROBLAZE_PCI_BRIDGE_H */
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index b3a40c3..8a9cb9f 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -10,58 +10,10 @@
 #include <linux/pci.h>
 #include <linux/list.h>
 #include <linux/ioport.h>
+#include <asm-generic/pci-bridge.h>
 
 struct device_node;
 
-enum {
-	/* Force re-assigning all resources (ignore firmware
-	 * setup completely)
-	 */
-	PCI_REASSIGN_ALL_RSRC	= 0x00000001,
-
-	/* Re-assign all bus numbers */
-	PCI_REASSIGN_ALL_BUS	= 0x00000002,
-
-	/* Do not try to assign, just use existing setup */
-	PCI_PROBE_ONLY		= 0x00000004,
-
-	/* Don't bother with ISA alignment unless the bridge has
-	 * ISA forwarding enabled
-	 */
-	PCI_CAN_SKIP_ISA_ALIGN	= 0x00000008,
-
-	/* Enable domain numbers in /proc */
-	PCI_ENABLE_PROC_DOMAINS	= 0x00000010,
-	/* ... except for domain 0 */
-	PCI_COMPAT_DOMAIN_0		= 0x00000020,
-};
-#ifdef CONFIG_PCI
-extern unsigned int pci_flags;
-
-static inline void pci_set_flags(int flags)
-{
-	pci_flags = flags;
-}
-
-static inline void pci_add_flags(int flags)
-{
-	pci_flags |= flags;
-}
-
-static inline int pci_has_flag(int flag)
-{
-	return (pci_flags & flag);
-}
-#else
-static inline void pci_set_flags(int flags) { }
-static inline void pci_add_flags(int flags) { }
-static inline int pci_has_flag(int flag)
-{
-	return 0;
-}
-#endif
-
-
 /*
  * Structure of a PCI controller (host bridge)
  */
diff --git a/include/asm-generic/pci-bridge.h b/include/asm-generic/pci-bridge.h
new file mode 100644
index 0000000..4a5aca2
--- /dev/null
+++ b/include/asm-generic/pci-bridge.h
@@ -0,0 +1,62 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_GENERIC_PCI_BRIDGE_H
+#define _ASM_GENERIC_PCI_BRIDGE_H
+
+#ifdef __KERNEL__
+
+enum {
+	/* Force re-assigning all resources (ignore firmware
+	 * setup completely)
+	 */
+	PCI_REASSIGN_ALL_RSRC	= 0x00000001,
+
+	/* Re-assign all bus numbers */
+	PCI_REASSIGN_ALL_BUS	= 0x00000002,
+
+	/* Do not try to assign, just use existing setup */
+	PCI_PROBE_ONLY		= 0x00000004,
+
+	/* Don't bother with ISA alignment unless the bridge has
+	 * ISA forwarding enabled
+	 */
+	PCI_CAN_SKIP_ISA_ALIGN	= 0x00000008,
+
+	/* Enable domain numbers in /proc */
+	PCI_ENABLE_PROC_DOMAINS	= 0x00000010,
+	/* ... except for domain 0 */
+	PCI_COMPAT_DOMAIN_0	= 0x00000020,
+};
+
+#ifdef CONFIG_PCI
+extern unsigned int pci_flags;
+
+static inline void pci_set_flags(int flags)
+{
+	pci_flags = flags;
+}
+
+static inline void pci_add_flags(int flags)
+{
+	pci_flags |= flags;
+}
+
+static inline int pci_has_flag(int flag)
+{
+	return pci_flags & flag;
+}
+#else
+static inline void pci_set_flags(int flags) { }
+static inline void pci_add_flags(int flags) { }
+static inline int pci_has_flag(int flag)
+{
+	return 0;
+}
+#endif	/* CONFIG_PCI */
+
+#endif	/* __KERNEL__ */
+#endif	/* _ASM_GENERIC_PCI_BRIDGE_H */