Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (258 commits)
  omap: zoom: host should not pull up wl1271's irq line
  arm: plat-omap: iommu: fix request_mem_region() error path
  OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430
  omap4: mux: Remove duplicate mux modes
  omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag
  omap: iovmm: disallow mapping NULL address when IOVMF_DA_ANON is set
  omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected
  omap4: board-omap4panda: Initialise the serial pads
  omap3: board-3430sdp: Initialise the serial pads
  omap4: board-4430sdp: Initialise the serial pads
  omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init
  omap2+: mux: Remove the use of IDLE flag
  omap2+: Add separate list for dynamic pads to mux
  perf: add OMAP support for the new power events
  OMAP4: Add IVA OPP enteries.
  OMAP4: Update Voltage Rail Values for MPU, IVA and CORE
  OMAP4: Enable 800 MHz and 1 GHz MPU-OPP
  OMAP3+: OPP: Replace voltage values with Macros
  OMAP3: wdtimer: Fix CORE idle transition
  Watchdog: omap_wdt: add fine grain runtime-pm
  ...

Fix up various conflicts in
 - arch/arm/mach-omap2/board-omap3evm.c
 - arch/arm/mach-omap2/clock3xxx_data.c
 - arch/arm/mach-omap2/usb-musb.c
 - arch/arm/plat-omap/include/plat/usb.h
 - drivers/usb/musb/musb_core.h

1 files changed, 10 insertions, 8 deletions

diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c
index ec03625..051213f 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c
@@ -118,7 +118,8 @@ int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
 /**
  * omap2_prm_deassert_hardreset - deassert a submodule hardreset line and wait
  * @prm_mod: PRM submodule base (e.g. CORE_MOD)
- * @shift: register bit shift corresponding to the reset line to deassert
+ * @rst_shift: register bit shift corresponding to the reset line to deassert
+ * @st_shift: register bit shift for the status of the deasserted submodule
  *
  * Some IPs like dsp or iva contain processors that require an HW
  * reset line to be asserted / deasserted in order to fully enable the
@@ -129,27 +130,28 @@ int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
  * -EINVAL upon an argument error, -EEXIST if the submodule was already out
  * of reset, or -EBUSY if the submodule did not exit reset promptly.
  */
-int omap2_prm_deassert_hardreset(s16 prm_mod, u8 shift)
+int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift)
 {
-	u32 mask;
+	u32 rst, st;
 	int c;
 
 	if (!(cpu_is_omap24xx() || cpu_is_omap34xx()))
 		return -EINVAL;
 
-	mask = 1 << shift;
+	rst = 1 << rst_shift;
+	st = 1 << st_shift;
 
 	/* Check the current status to avoid de-asserting the line twice */
-	if (omap2_prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL, mask) == 0)
+	if (omap2_prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL, rst) == 0)
 		return -EEXIST;
 
 	/* Clear the reset status by writing 1 to the status bit */
-	omap2_prm_rmw_mod_reg_bits(0xffffffff, mask, prm_mod, OMAP2_RM_RSTST);
+	omap2_prm_rmw_mod_reg_bits(0xffffffff, st, prm_mod, OMAP2_RM_RSTST);
 	/* de-assert the reset control line */
-	omap2_prm_rmw_mod_reg_bits(mask, 0, prm_mod, OMAP2_RM_RSTCTRL);
+	omap2_prm_rmw_mod_reg_bits(rst, 0, prm_mod, OMAP2_RM_RSTCTRL);
 	/* wait the status to be set */
 	omap_test_timeout(omap2_prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTST,
-						  mask),
+						  st),
 			  MAX_MODULE_HARDRESET_WAIT, c);
 
 	return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;