ARM: mach-shmobile: ag5evm: scan keyboard support

This consists of platform device resources/data for the board, and
simple clvdev entry for MSTP bit for keysc module.

This support only 49 of 80 key-switches on the board.

Signed-off-by: Takashi YOSHII <takashi.yoshii.zj@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

1 files changed, 64 insertions, 0 deletions

diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index e0bc081..4758690 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -30,6 +30,9 @@
 #include <linux/serial_sci.h>
 #include <linux/smsc911x.h>
 #include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
+
 #include <mach/hardware.h>
 #include <mach/sh73a0.h>
 #include <mach/common.h>
@@ -70,8 +73,49 @@ static struct platform_device eth_device = {
 	.num_resources	= ARRAY_SIZE(smsc9220_resources),
 };
 
+static struct sh_keysc_info keysc_platdata = {
+	.mode		= SH_KEYSC_MODE_6,
+	.scan_timing	= 3,
+	.delay		= 100,
+	.keycodes	= {
+		KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, KEY_F, KEY_G,
+		KEY_H, KEY_I, KEY_J, KEY_K, KEY_L, KEY_M, KEY_N,
+		KEY_O, KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T, KEY_U,
+		KEY_V, KEY_W, KEY_X, KEY_Y, KEY_Z, KEY_HOME, KEY_SLEEP,
+		KEY_SPACE, KEY_9, KEY_6, KEY_3, KEY_WAKEUP, KEY_RIGHT, \
+		KEY_COFFEE,
+		KEY_0, KEY_8, KEY_5, KEY_2, KEY_DOWN, KEY_ENTER, KEY_UP,
+		KEY_KPASTERISK, KEY_7, KEY_4, KEY_1, KEY_STOP, KEY_LEFT, \
+		KEY_COMPUTER,
+	},
+};
+
+static struct resource keysc_resources[] = {
+	[0] = {
+		.name	= "KEYSC",
+		.start	= 0xe61b0000,
+		.end	= 0xe61b0098 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_spi(71),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device keysc_device = {
+	.name		= "sh_keysc",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(keysc_resources),
+	.resource	= keysc_resources,
+	.dev		= {
+		.platform_data	= &keysc_platdata,
+	},
+};
+
 static struct platform_device *ag5evm_devices[] __initdata = {
 	&eth_device,
+	&keysc_device,
 };
 
 static struct map_desc ag5evm_io_desc[] __initdata = {
@@ -129,6 +173,26 @@ static void __init ag5evm_init(void)
 	gpio_request(GPIO_FN_SCIFA2_RTS1_, NULL);
 	gpio_request(GPIO_FN_SCIFA2_CTS1_, NULL);
 
+	/* enable KEYSC */
+	gpio_request(GPIO_FN_KEYIN0, NULL);
+	gpio_request(GPIO_FN_KEYIN1, NULL);
+	gpio_request(GPIO_FN_KEYIN2, NULL);
+	gpio_request(GPIO_FN_KEYIN3, NULL);
+	gpio_request(GPIO_FN_KEYIN4, NULL);
+	gpio_request(GPIO_FN_KEYIN5, NULL);
+	gpio_request(GPIO_FN_KEYIN6, NULL);
+	gpio_request(GPIO_FN_KEYIN7, NULL);
+	gpio_request(GPIO_FN_KEYOUT0, NULL);
+	gpio_request(GPIO_FN_KEYOUT1, NULL);
+	gpio_request(GPIO_FN_KEYOUT2, NULL);
+	gpio_request(GPIO_FN_KEYOUT3, NULL);
+	gpio_request(GPIO_FN_KEYOUT4, NULL);
+	gpio_request(GPIO_FN_KEYOUT5, NULL);
+	gpio_request(GPIO_FN_PORT59_KEYOUT6, NULL);
+	gpio_request(GPIO_FN_PORT58_KEYOUT7, NULL);
+	gpio_request(GPIO_FN_KEYOUT8, NULL);
+	gpio_request(GPIO_FN_PORT149_KEYOUT9, NULL);
+
 	/* enable SMSC911X */
 	gpio_request(GPIO_PORT144, NULL); /* PINTA2 */
 	gpio_direction_input(GPIO_PORT144);