omap: Use a memory address for storing the debug port info instead of UART1 scratchpad

This removes the dependency to the UART1 being available for storing
the debug configuration in uncompress.h. This will simplify the
DEBUG_LL UART configuration for boards that may not have UART1, or
have an external UART as it requires only one mapping for DEBUG_LL.

The patch has a few limitations. Basically now we're assuming that
the kernel uncompress code won't overlap with OMAP_UART_INFO. We also
assume the printascii is called at least once before paging_init in
order for addruart to have a chance to read the UART setup from
OMAP_UART_INFO.

As suggested by Cyril Chemparathy <cyril@ti.com>,
Vikram Pandita <vikram.pandita@ti.com> and
Kevin Hilman <khilman@deeprootsystems.com>. Based on an earlier
patch posted for Davinci by Cyril Chemparathy <cyril@ti.com>.

Signed-off-by: Tony Lindgren <tony@atomide.com>

1 files changed, 17 insertions, 27 deletions

diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index 81d9ec5..bbedd71 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -20,27 +20,21 @@
 #include <linux/types.h>
 #include <linux/serial_reg.h>
 
+#include <asm/memory.h>
 #include <asm/mach-types.h>
 
 #include <plat/serial.h>
 
-static volatile u8 *uart1_base;
-static int uart1_shift;
-
 static volatile u8 *uart_base;
 static int uart_shift;
 
 /*
- * Store the DEBUG_LL uart number into UART1 scratchpad register.
+ * Store the DEBUG_LL uart number into memory.
  * See also debug-macro.S, and serial.c for related code.
- *
- * Please note that we currently assume that:
- * - UART1 clocks are enabled for register access
- * - UART1 scratchpad register can be used
  */
-static void set_uart1_scratchpad(unsigned char port)
+static void set_omap_uart_info(unsigned char port)
 {
-	uart1_base[UART_SCR << uart1_shift] = port;
+	*(volatile u32 *)OMAP_UART_INFO = port;
 }
 
 static void putc(int c)
@@ -60,42 +54,38 @@ static inline void flush(void)
 /*
  * Macros to configure UART1 and debug UART
  */
-#define _DEBUG_LL_ENTRY(mach, uart1_phys, uart1_shft,			\
-			dbg_uart, dbg_shft, dbg_id)			\
+#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id)		\
 	if (machine_is_##mach()) {					\
-		uart1_base = (volatile u8 *)(uart1_phys);		\
-		uart1_shift = (uart1_shft);				\
 		uart_base = (volatile u8 *)(dbg_uart);			\
 		uart_shift = (dbg_shft);				\
 		port = (dbg_id);					\
-		set_uart1_scratchpad(port);				\
+		set_omap_uart_info(port);				\
 		break;							\
 	}
 
 #define DEBUG_LL_OMAP7XX(p, mach)					\
-	_DEBUG_LL_ENTRY(mach, OMAP1_UART1_BASE, OMAP7XX_PORT_SHIFT,	\
-		OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, OMAP1UART##p)
+	_DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT,	\
+		OMAP1UART##p)
 
 #define DEBUG_LL_OMAP1(p, mach)						\
-	_DEBUG_LL_ENTRY(mach, OMAP1_UART1_BASE, OMAP_PORT_SHIFT,	\
-		OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP1UART##p)
+	_DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT,	\
+		OMAP1UART##p)
 
 #define DEBUG_LL_OMAP2(p, mach)						\
-	_DEBUG_LL_ENTRY(mach, OMAP2_UART1_BASE, OMAP_PORT_SHIFT,	\
-		OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP2UART##p)
+	_DEBUG_LL_ENTRY(mach, OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT,	\
+		OMAP2UART##p)
 
 #define DEBUG_LL_OMAP3(p, mach)						\
-	_DEBUG_LL_ENTRY(mach, OMAP3_UART1_BASE, OMAP_PORT_SHIFT,	\
-		OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP3UART##p)
+	_DEBUG_LL_ENTRY(mach, OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT,	\
+		OMAP3UART##p)
 
 #define DEBUG_LL_OMAP4(p, mach)						\
-	_DEBUG_LL_ENTRY(mach, OMAP4_UART1_BASE, OMAP_PORT_SHIFT,	\
-		OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP4UART##p)
+	_DEBUG_LL_ENTRY(mach, OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT,	\
+		OMAP4UART##p)
 
 /* Zoom2/3 shift is different for UART1 and external port */
 #define DEBUG_LL_ZOOM(mach)						\
-	_DEBUG_LL_ENTRY(mach, OMAP2_UART1_BASE, OMAP_PORT_SHIFT,	\
-		ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART)
+	_DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART)
 
 static inline void __arch_decomp_setup(unsigned long arch_id)
 {