diff options
author | dmitry pervushin <dpervushin@ru.mvista.com> | 2006-05-21 14:53:06 +0400 |
---|---|---|
committer | Ralf Baechle <ralf@linux-mips.org> | 2006-06-19 17:39:26 +0100 |
commit | 355c471f2ff324c21f8a1fb8e2e242a0f2a4aa68 (patch) | |
tree | 8a491d03e865b9e16686004dea765a141e048219 /arch/mips | |
parent | 4a0312fca6599299bbed944ce09278d90388a3e5 (diff) | |
download | kernel_samsung_smdk4412-355c471f2ff324c21f8a1fb8e2e242a0f2a4aa68.zip kernel_samsung_smdk4412-355c471f2ff324c21f8a1fb8e2e242a0f2a4aa68.tar.gz kernel_samsung_smdk4412-355c471f2ff324c21f8a1fb8e2e242a0f2a4aa68.tar.bz2 |
[MIPS] Support for the R5500-based NEC EMMA2RH Mark-eins board
Signed-off-by: dmitry pervushin <dpervushin@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'arch/mips')
-rw-r--r-- | arch/mips/Kconfig | 19 | ||||
-rw-r--r-- | arch/mips/Makefile | 9 | ||||
-rw-r--r-- | arch/mips/configs/emma2rh_defconfig | 1198 | ||||
-rw-r--r-- | arch/mips/emma2rh/common/Makefile | 13 | ||||
-rw-r--r-- | arch/mips/emma2rh/common/irq.c | 108 | ||||
-rw-r--r-- | arch/mips/emma2rh/common/irq_emma2rh.c | 134 | ||||
-rw-r--r-- | arch/mips/emma2rh/common/prom.c | 77 | ||||
-rw-r--r-- | arch/mips/emma2rh/markeins/Makefile | 13 | ||||
-rw-r--r-- | arch/mips/emma2rh/markeins/irq.c | 134 | ||||
-rw-r--r-- | arch/mips/emma2rh/markeins/irq_markeins.c | 197 | ||||
-rw-r--r-- | arch/mips/emma2rh/markeins/led.c | 60 | ||||
-rw-r--r-- | arch/mips/emma2rh/markeins/platform.c | 170 | ||||
-rw-r--r-- | arch/mips/emma2rh/markeins/setup.c | 182 | ||||
-rw-r--r-- | arch/mips/pci/Makefile | 1 | ||||
-rw-r--r-- | arch/mips/pci/fixup-emma2rh.c | 102 | ||||
-rw-r--r-- | arch/mips/pci/ops-emma2rh.c | 186 | ||||
-rw-r--r-- | arch/mips/pci/pci-emma2rh.c | 90 |
17 files changed, 2693 insertions, 0 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index ecf922e..db3d008 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -530,6 +530,20 @@ config QEMU simulate actual MIPS hardware platforms. More information on Qemu can be found at http://www.linux-mips.org/wiki/Qemu. +config MARKEINS + bool "Support for NEC EMMA2RH Mark-eins" + select DMA_NONCOHERENT + select HW_HAS_PCI + select IRQ_CPU + select SWAP_IO_SPACE + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_HAS_CPU_R5000 + help + This enables support for the R5432-based NEC Mark-eins + boards with R5500 CPU. + config SGI_IP22 bool "SGI IP22 (Indy/Indigo2)" select ARC @@ -968,6 +982,11 @@ config SOC_PNX8550 config SWAP_IO_SPACE bool +config EMMA2RH + bool + depends on MARKEINS + default y + # # Unfortunately not all GT64120 systems run the chip at the same clock. # As the user for the clock rate and try to minimize the available options. diff --git a/arch/mips/Makefile b/arch/mips/Makefile index e0cab28..207197b 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -465,6 +465,15 @@ libs-$(CONFIG_PNX8550_JBS) += arch/mips/philips/pnx8550/jbs/ #cflags-$(CONFIG_PNX8550_JBS) += -Iinclude/asm-mips/mach-pnx8550 load-$(CONFIG_PNX8550_JBS) += 0xffffffff80060000 +# NEC EMMA2RH boards +# +core-$(CONFIG_EMMA2RH) += arch/mips/emma2rh/common/ +cflags-$(CONFIG_EMMA2RH) += -Iinclude/asm-mips/mach-emma2rh + +# NEC EMMA2RH Mark-eins +core-$(CONFIG_MARKEINS) += arch/mips/emma2rh/markeins/ +load-$(CONFIG_MARKEINS) += 0xffffffff88100000 + # # SGI IP22 (Indy/Indigo2) # diff --git a/arch/mips/configs/emma2rh_defconfig b/arch/mips/configs/emma2rh_defconfig new file mode 100644 index 0000000..da1bc03 --- /dev/null +++ b/arch/mips/configs/emma2rh_defconfig @@ -0,0 +1,1198 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.17 +# Sun Jun 18 13:46:53 2006 +# +CONFIG_MIPS=y + +# +# Machine selection +# +# CONFIG_MIPS_MTX1 is not set +# CONFIG_MIPS_BOSPORUS is not set +# CONFIG_MIPS_PB1000 is not set +# CONFIG_MIPS_PB1100 is not set +# CONFIG_MIPS_PB1500 is not set +# CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_PB1200 is not set +# CONFIG_MIPS_DB1000 is not set +# CONFIG_MIPS_DB1100 is not set +# CONFIG_MIPS_DB1500 is not set +# CONFIG_MIPS_DB1550 is not set +# CONFIG_MIPS_DB1200 is not set +# CONFIG_MIPS_MIRAGE is not set +# CONFIG_MIPS_COBALT is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MIPS_EV64120 is not set +# CONFIG_MIPS_EV96100 is not set +# CONFIG_MIPS_IVR is not set +# CONFIG_MIPS_ITE8172 is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set +# CONFIG_MIPS_ATLAS is not set +# CONFIG_MIPS_MALTA is not set +# CONFIG_MIPS_SEAD is not set +# CONFIG_WR_PPMC is not set +# CONFIG_MIPS_SIM is not set +# CONFIG_MOMENCO_JAGUAR_ATX is not set +# CONFIG_MOMENCO_OCELOT is not set +# CONFIG_MOMENCO_OCELOT_3 is not set +# CONFIG_MOMENCO_OCELOT_C is not set +# CONFIG_MOMENCO_OCELOT_G is not set +# CONFIG_MIPS_XXS1500 is not set +# CONFIG_PNX8550_V2PCI is not set +# CONFIG_PNX8550_JBS is not set +# CONFIG_DDB5477 is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_QEMU is not set +CONFIG_MARKEINS=y +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_PTSWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SNI_RM200_PCI is not set +# CONFIG_TOSHIBA_JMR3927 is not set +# CONFIG_TOSHIBA_RBTX4927 is not set +# CONFIG_TOSHIBA_RBTX4938 is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_CPU_BIG_ENDIAN=y +# CONFIG_CPU_LITTLE_ENDIAN is not set +CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_IRQ_CPU=y +CONFIG_SWAP_IO_SPACE=y +CONFIG_EMMA2RH=y +CONFIG_MIPS_L1_CACHE_SHIFT=5 + +# +# CPU selection +# +# CONFIG_CPU_MIPS32_R1 is not set +# CONFIG_CPU_MIPS32_R2 is not set +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_VR41XX is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_TX49XX is not set +CONFIG_CPU_R5000=y +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +CONFIG_SYS_HAS_CPU_R5000=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y + +# +# Kernel type +# +CONFIG_32BIT=y +# CONFIG_64BIT is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_MT_SMTC is not set +# CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_VPE_LOADER is not set +# CONFIG_64BIT_PHYS_ADDR is not set +CONFIG_CPU_HAS_LLSC=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_PREEMPT_BKL=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set +CONFIG_OBSOLETE_INTERMODULE=y + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Bus options (PCI, PCMCIA, EISA, ISA, TC) +# +CONFIG_HW_HAS_PCI=y +CONFIG_PCI=y +CONFIG_MMU=y + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_TRAD_SIGNALS=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +CONFIG_NET_KEY=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +# CONFIG_IP_ROUTE_FWMARK is not set +CONFIG_IP_ROUTE_MULTIPATH=y +# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_IPV6_TUNNEL is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_XTABLES is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_IP_NF_CONNTRACK is not set +# CONFIG_IP_NF_QUEUE is not set + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +# CONFIG_IP6_NF_QUEUE is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +CONFIG_IP_SCTP=m +# CONFIG_SCTP_DBG_MSG is not set +# CONFIG_SCTP_DBG_OBJCNT is not set +# CONFIG_SCTP_HMAC_NONE is not set +# CONFIG_SCTP_HMAC_SHA1 is not set +CONFIG_SCTP_HMAC_MD5=y + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x1e000000 +CONFIG_MTD_PHYSMAP_LEN=0x02000000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_CRYPTOLOOP=m +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_DM9000 is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +CONFIG_NATSEMI=y +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_LAN_SAA9730 is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=m +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +CONFIG_RTC=m +CONFIG_GEN_RTC=m +CONFIG_GEN_RTC_X=y +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +CONFIG_I2C_DEBUG_CORE=y +# CONFIG_I2C_DEBUG_ALGO is not set +CONFIG_I2C_DEBUG_BUS=y +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=m +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=m +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=m +CONFIG_XFS_EXPORT=y +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_SECURITY is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=m +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +# CONFIG_NTFS_RW is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_NFS_DIRECTIO=y +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set +CONFIG_NFSD_TCP=y +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set +CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE="console=ttyS0,115200 mem=192m ip=bootp root=/dev/nfs rw" + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y diff --git a/arch/mips/emma2rh/common/Makefile b/arch/mips/emma2rh/common/Makefile new file mode 100644 index 0000000..859121b --- /dev/null +++ b/arch/mips/emma2rh/common/Makefile @@ -0,0 +1,13 @@ +# +# arch/mips/emma2rh/common/Makefile +# Makefile for the common code of NEC EMMA2RH based board. +# +# Copyright (C) NEC Electronics Corporation 2005-2006 +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# + +obj-$(CONFIG_MARKEINS) += irq.o irq_emma2rh.o prom.o diff --git a/arch/mips/emma2rh/common/irq.c b/arch/mips/emma2rh/common/irq.c new file mode 100644 index 0000000..b075281 --- /dev/null +++ b/arch/mips/emma2rh/common/irq.c @@ -0,0 +1,108 @@ +/* + * arch/mips/emma2rh/common/irq.c + * This file is common irq dispatcher. + * + * Copyright (C) NEC Electronics Corporation 2005-2006 + * + * This file is based on the arch/mips/ddb5xxx/ddb5477/irq.c + * + * Copyright 2001 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/config.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/types.h> + +#include <asm/i8259.h> +#include <asm/system.h> +#include <asm/mipsregs.h> +#include <asm/debug.h> +#include <asm/addrspace.h> +#include <asm/bootinfo.h> + +#include <asm/emma2rh/emma2rh.h> + +/* + * the first level int-handler will jump here if it is a emma2rh irq + */ +asmlinkage void emma2rh_irq_dispatch(struct pt_regs *regs) +{ + u32 intStatus; + u32 bitmask; + u32 i; + + intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_0) + & emma2rh_in32(EMMA2RH_BHIF_INT_EN_0); + +#ifdef EMMA2RH_SW_CASCADE + if (intStatus & + (1 << ((EMMA2RH_SW_CASCADE - EMMA2RH_IRQ_INT0) & (32 - 1)))) { + u32 swIntStatus; + swIntStatus = emma2rh_in32(EMMA2RH_BHIF_SW_INT) + & emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN); + for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) { + if (swIntStatus & bitmask) { + do_IRQ(EMMA2RH_SW_IRQ_BASE + i, regs); + return; + } + } + } +#endif + + for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) { + if (intStatus & bitmask) { + do_IRQ(EMMA2RH_IRQ_BASE + i, regs); + return; + } + } + + intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_1) + & emma2rh_in32(EMMA2RH_BHIF_INT_EN_1); + +#ifdef EMMA2RH_GPIO_CASCADE + if (intStatus & + (1 << ((EMMA2RH_GPIO_CASCADE - EMMA2RH_IRQ_INT0) & (32 - 1)))) { + u32 gpioIntStatus; + gpioIntStatus = emma2rh_in32(EMMA2RH_GPIO_INT_ST) + & emma2rh_in32(EMMA2RH_GPIO_INT_MASK); + for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) { + if (gpioIntStatus & bitmask) { + do_IRQ(EMMA2RH_GPIO_IRQ_BASE + i, regs); + return; + } + } + } +#endif + + for (i = 32, bitmask = 1; i < 64; i++, bitmask <<= 1) { + if (intStatus & bitmask) { + do_IRQ(EMMA2RH_IRQ_BASE + i, regs); + return; + } + } + + intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_2) + & emma2rh_in32(EMMA2RH_BHIF_INT_EN_2); + + for (i = 64, bitmask = 1; i < 96; i++, bitmask <<= 1) { + if (intStatus & bitmask) { + do_IRQ(EMMA2RH_IRQ_BASE + i, regs); + return; + } + } +} diff --git a/arch/mips/emma2rh/common/irq_emma2rh.c b/arch/mips/emma2rh/common/irq_emma2rh.c new file mode 100644 index 0000000..b886aa9 --- /dev/null +++ b/arch/mips/emma2rh/common/irq_emma2rh.c @@ -0,0 +1,134 @@ +/* + * arch/mips/emma2rh/common/irq_emma2rh.c + * This file defines the irq handler for EMMA2RH. + * + * Copyright (C) NEC Electronics Corporation 2005-2006 + * + * This file is based on the arch/mips/ddb5xxx/ddb5477/irq_5477.c + * + * Copyright 2001 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* + * EMMA2RH defines 64 IRQs. + * + * This file exports one function: + * emma2rh_irq_init(u32 irq_base); + */ + +#include <linux/interrupt.h> +#include <linux/types.h> +#include <linux/ptrace.h> + +#include <asm/debug.h> + +#include <asm/emma2rh/emma2rh.h> + +/* number of total irqs supported by EMMA2RH */ +#define NUM_EMMA2RH_IRQ 96 + +static int emma2rh_irq_base = -1; + +void ll_emma2rh_irq_enable(int); +void ll_emma2rh_irq_disable(int); + +static void emma2rh_irq_enable(unsigned int irq) +{ + ll_emma2rh_irq_enable(irq - emma2rh_irq_base); +} + +static void emma2rh_irq_disable(unsigned int irq) +{ + ll_emma2rh_irq_disable(irq - emma2rh_irq_base); +} + +static unsigned int emma2rh_irq_startup(unsigned int irq) +{ + emma2rh_irq_enable(irq); + return 0; +} + +#define emma2rh_irq_shutdown emma2rh_irq_disable + +static void emma2rh_irq_ack(unsigned int irq) +{ + /* disable interrupt - some handler will re-enable the irq + * and if the interrupt is leveled, we will have infinite loop + */ + ll_emma2rh_irq_disable(irq - emma2rh_irq_base); +} + +static void emma2rh_irq_end(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) + ll_emma2rh_irq_enable(irq - emma2rh_irq_base); +} + +hw_irq_controller emma2rh_irq_controller = { + .typename = "emma2rh_irq", + .startup = emma2rh_irq_startup, + .shutdown = emma2rh_irq_shutdown, + .enable = emma2rh_irq_enable, + .disable = emma2rh_irq_disable, + .ack = emma2rh_irq_ack, + .end = emma2rh_irq_end, + .set_affinity = NULL /* no affinity stuff for UP */ +}; + +void emma2rh_irq_init(u32 irq_base) +{ + u32 i; + + for (i = irq_base; i < irq_base + NUM_EMMA2RH_IRQ; i++) { + irq_desc[i].status = IRQ_DISABLED; + irq_desc[i].action = NULL; + irq_desc[i].depth = 1; + irq_desc[i].handler = &emma2rh_irq_controller; + } + + emma2rh_irq_base = irq_base; +} + +void ll_emma2rh_irq_enable(int emma2rh_irq) +{ + u32 reg_value; + u32 reg_bitmask; + u32 reg_index; + + reg_index = EMMA2RH_BHIF_INT_EN_0 + + (EMMA2RH_BHIF_INT_EN_1 - EMMA2RH_BHIF_INT_EN_0) + * (emma2rh_irq / 32); + reg_value = emma2rh_in32(reg_index); + reg_bitmask = 0x1 << (emma2rh_irq % 32); + db_assert((reg_value & reg_bitmask) == 0); + emma2rh_out32(reg_index, reg_value | reg_bitmask); +} + +void ll_emma2rh_irq_disable(int emma2rh_irq) +{ + u32 reg_value; + u32 reg_bitmask; + u32 reg_index; + + reg_index = EMMA2RH_BHIF_INT_EN_0 + + (EMMA2RH_BHIF_INT_EN_1 - EMMA2RH_BHIF_INT_EN_0) + * (emma2rh_irq / 32); + reg_value = emma2rh_in32(reg_index); + reg_bitmask = 0x1 << (emma2rh_irq % 32); + db_assert((reg_value & reg_bitmask) != 0); + emma2rh_out32(reg_index, reg_value & ~reg_bitmask); +} diff --git a/arch/mips/emma2rh/common/prom.c b/arch/mips/emma2rh/common/prom.c new file mode 100644 index 0000000..8bba0b0 --- /dev/null +++ b/arch/mips/emma2rh/common/prom.c @@ -0,0 +1,77 @@ +/* + * arch/mips/emma2rh/common/prom.c + * This file is prom file. + * + * Copyright (C) NEC Electronics Corporation 2004-2006 + * + * This file is based on the arch/mips/ddb5xxx/common/prom.c + * + * Copyright 2001 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/config.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/sched.h> +#include <linux/bootmem.h> + +#include <asm/addrspace.h> +#include <asm/bootinfo.h> +#include <asm/emma2rh/emma2rh.h> +#include <asm/debug.h> + +const char *get_system_type(void) +{ + switch (mips_machtype) { + case MACH_NEC_MARKEINS: + return "NEC EMMA2RH Mark-eins"; + default: + return "Unknown NEC board"; + } +} + +/* [jsun@junsun.net] PMON passes arguments in C main() style */ +void __init prom_init(void) +{ + int argc = fw_arg0; + char **arg = (char **)fw_arg1; + int i; + + /* if user passes kernel args, ignore the default one */ + if (argc > 1) + arcs_cmdline[0] = '\0'; + + /* arg[0] is "g", the rest is boot parameters */ + for (i = 1; i < argc; i++) { + if (strlen(arcs_cmdline) + strlen(arg[i] + 1) + >= sizeof(arcs_cmdline)) + break; + strcat(arcs_cmdline, arg[i]); + strcat(arcs_cmdline, " "); + } + + mips_machgroup = MACH_GROUP_NEC_EMMA2RH; + +#if defined(CONFIG_MARKEINS) + mips_machtype = MACH_NEC_MARKEINS; + add_memory_region(0, EMMA2RH_RAM_SIZE, BOOT_MEM_RAM); +#endif + +} + +void __init prom_free_prom_memory(void) +{ +} diff --git a/arch/mips/emma2rh/markeins/Makefile b/arch/mips/emma2rh/markeins/Makefile new file mode 100644 index 0000000..14fc268 --- /dev/null +++ b/arch/mips/emma2rh/markeins/Makefile @@ -0,0 +1,13 @@ +# +# arch/mips/emma2rh/markeins/Makefile +# Makefile for the common code of NEC EMMA2RH based board. +# +# Copyright (C) NEC Electronics Corporation 2005-2006 +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# + +obj-$(CONFIG_MARKEINS) += irq.o irq_markeins.o setup.o led.o platform.o diff --git a/arch/mips/emma2rh/markeins/irq.c b/arch/mips/emma2rh/markeins/irq.c new file mode 100644 index 0000000..76dc3fa --- /dev/null +++ b/arch/mips/emma2rh/markeins/irq.c @@ -0,0 +1,134 @@ +/* + * arch/mips/emma2rh/markeins/irq.c + * This file defines the irq handler for EMMA2RH. + * + * Copyright (C) NEC Electronics Corporation 2004-2006 + * + * This file is based on the arch/mips/ddb5xxx/ddb5477/irq.c + * + * Copyright 2001 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/config.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/types.h> +#include <linux/ptrace.h> +#include <linux/delay.h> + +#include <asm/i8259.h> +#include <asm/irq_cpu.h> +#include <asm/system.h> +#include <asm/mipsregs.h> +#include <asm/debug.h> +#include <asm/addrspace.h> +#include <asm/bootinfo.h> + +#include <asm/emma2rh/emma2rh.h> + +/* + * IRQ mapping + * + * 0-7: 8 CPU interrupts + * 0 - software interrupt 0 + * 1 - software interrupt 1 + * 2 - most Vrc5477 interrupts are routed to this pin + * 3 - (optional) some other interrupts routed to this pin for debugg + * 4 - not used + * 5 - not used + * 6 - not used + * 7 - cpu timer (used by default) + * + */ + +extern void emma2rh_sw_irq_init(u32 base); +extern void emma2rh_gpio_irq_init(u32 base); +extern void emma2rh_irq_init(u32 base); +extern asmlinkage void emma2rh_irq_dispatch(struct pt_regs *regs); + +static struct irqaction irq_cascade = { + .handler = no_action, + .flags = 0, + .mask = CPU_MASK_NONE, + .name = "cascade", + .dev_id = NULL, + .next = NULL, +}; + +void __init arch_init_irq(void) +{ + u32 reg; + + db_run(printk("markeins_irq_setup invoked.\n")); + + /* by default, interrupts are disabled. */ + emma2rh_out32(EMMA2RH_BHIF_INT_EN_0, 0); + emma2rh_out32(EMMA2RH_BHIF_INT_EN_1, 0); + emma2rh_out32(EMMA2RH_BHIF_INT_EN_2, 0); + emma2rh_out32(EMMA2RH_BHIF_INT1_EN_0, 0); + emma2rh_out32(EMMA2RH_BHIF_INT1_EN_1, 0); + emma2rh_out32(EMMA2RH_BHIF_INT1_EN_2, 0); + emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, 0); + + clear_c0_status(0xff00); + set_c0_status(0x0400); + +#define GPIO_PCI (0xf<<15) + /* setup GPIO interrupt for PCI interface */ + /* direction input */ + reg = emma2rh_in32(EMMA2RH_GPIO_DIR); + emma2rh_out32(EMMA2RH_GPIO_DIR, reg & ~GPIO_PCI); + /* disable interrupt */ + reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK); + emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg & ~GPIO_PCI); + /* level triggerd */ + reg = emma2rh_in32(EMMA2RH_GPIO_INT_MODE); + emma2rh_out32(EMMA2RH_GPIO_INT_MODE, reg | GPIO_PCI); + reg = emma2rh_in32(EMMA2RH_GPIO_INT_CND_A); + emma2rh_out32(EMMA2RH_GPIO_INT_CND_A, reg & (~GPIO_PCI)); + /* interrupt clear */ + emma2rh_out32(EMMA2RH_GPIO_INT_ST, ~GPIO_PCI); + + /* init all controllers */ + emma2rh_irq_init(EMMA2RH_IRQ_BASE); + emma2rh_sw_irq_init(EMMA2RH_SW_IRQ_BASE); + emma2rh_gpio_irq_init(EMMA2RH_GPIO_IRQ_BASE); + mips_cpu_irq_init(CPU_IRQ_BASE); + + /* setup cascade interrupts */ + setup_irq(EMMA2RH_IRQ_BASE + EMMA2RH_SW_CASCADE, &irq_cascade); + setup_irq(EMMA2RH_IRQ_BASE + EMMA2RH_GPIO_CASCADE, &irq_cascade); + setup_irq(CPU_IRQ_BASE + CPU_EMMA2RH_CASCADE, &irq_cascade); +} + +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_status() & read_c0_cause(); + + if (pending & STATUSF_IP7) + do_IRQ(CPU_IRQ_BASE + 7, regs); + else if (pending & STATUSF_IP2) + emma2rh_irq_dispatch(regs); + else if (pending & STATUSF_IP1) + do_IRQ(CPU_IRQ_BASE + 1, regs); + else if (pending & STATUSF_IP0) + do_IRQ(CPU_IRQ_BASE + 0, regs); + else + spurious_interrupt(regs); +} + + diff --git a/arch/mips/emma2rh/markeins/irq_markeins.c b/arch/mips/emma2rh/markeins/irq_markeins.c new file mode 100644 index 0000000..1783fda --- /dev/null +++ b/arch/mips/emma2rh/markeins/irq_markeins.c @@ -0,0 +1,197 @@ +/* + * arch/mips/emma2rh/markeins/irq_markeins.c + * This file defines the irq handler for Mark-eins. + * + * Copyright (C) NEC Electronics Corporation 2004-2006 + * + * This file is based on the arch/mips/ddb5xxx/ddb5477/irq_5477.c + * + * Copyright 2001 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/types.h> +#include <linux/ptrace.h> + +#include <asm/debug.h> +#include <asm/emma2rh/emma2rh.h> + +static int emma2rh_sw_irq_base = -1; +static int emma2rh_gpio_irq_base = -1; + +void ll_emma2rh_sw_irq_enable(int reg); +void ll_emma2rh_sw_irq_disable(int reg); +void ll_emma2rh_gpio_irq_enable(int reg); +void ll_emma2rh_gpio_irq_disable(int reg); + +static void emma2rh_sw_irq_enable(unsigned int irq) +{ + ll_emma2rh_sw_irq_enable(irq - emma2rh_sw_irq_base); +} + +static void emma2rh_sw_irq_disable(unsigned int irq) +{ + ll_emma2rh_sw_irq_disable(irq - emma2rh_sw_irq_base); +} + +static unsigned int emma2rh_sw_irq_startup(unsigned int irq) +{ + emma2rh_sw_irq_enable(irq); + return 0; +} + +#define emma2rh_sw_irq_shutdown emma2rh_sw_irq_disable + +static void emma2rh_sw_irq_ack(unsigned int irq) +{ + ll_emma2rh_sw_irq_disable(irq - emma2rh_sw_irq_base); +} + +static void emma2rh_sw_irq_end(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) + ll_emma2rh_sw_irq_enable(irq - emma2rh_sw_irq_base); +} + +hw_irq_controller emma2rh_sw_irq_controller = { + .typename = "emma2rh_sw_irq", + .startup = emma2rh_sw_irq_startup, + .shutdown = emma2rh_sw_irq_shutdown, + .enable = emma2rh_sw_irq_enable, + .disable = emma2rh_sw_irq_disable, + .ack = emma2rh_sw_irq_ack, + .end = emma2rh_sw_irq_end, + .set_affinity = NULL, +}; + +void emma2rh_sw_irq_init(u32 irq_base) +{ + u32 i; + + for (i = irq_base; i < irq_base + NUM_EMMA2RH_IRQ_SW; i++) { + irq_desc[i].status = IRQ_DISABLED; + irq_desc[i].action = NULL; + irq_desc[i].depth = 2; + irq_desc[i].handler = &emma2rh_sw_irq_controller; + } + + emma2rh_sw_irq_base = irq_base; +} + +void ll_emma2rh_sw_irq_enable(int irq) +{ + u32 reg; + + db_assert(irq >= 0); + db_assert(irq < NUM_EMMA2RH_IRQ_SW); + + reg = emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN); + reg |= 1 << irq; + emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, reg); +} + +void ll_emma2rh_sw_irq_disable(int irq) +{ + u32 reg; + + db_assert(irq >= 0); + db_assert(irq < 32); + + reg = emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN); + reg &= ~(1 << irq); + emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, reg); +} + +static void emma2rh_gpio_irq_enable(unsigned int irq) +{ + ll_emma2rh_gpio_irq_enable(irq - emma2rh_gpio_irq_base); +} + +static void emma2rh_gpio_irq_disable(unsigned int irq) +{ + ll_emma2rh_gpio_irq_disable(irq - emma2rh_gpio_irq_base); +} + +static unsigned int emma2rh_gpio_irq_startup(unsigned int irq) +{ + emma2rh_gpio_irq_enable(irq); + return 0; +} + +#define emma2rh_gpio_irq_shutdown emma2rh_gpio_irq_disable + +static void emma2rh_gpio_irq_ack(unsigned int irq) +{ + irq -= emma2rh_gpio_irq_base; + emma2rh_out32(EMMA2RH_GPIO_INT_ST, ~(1 << irq)); + ll_emma2rh_gpio_irq_disable(irq); +} + +static void emma2rh_gpio_irq_end(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) + ll_emma2rh_gpio_irq_enable(irq - emma2rh_gpio_irq_base); +} + +hw_irq_controller emma2rh_gpio_irq_controller = { + .typename = "emma2rh_gpio_irq", + .startup = emma2rh_gpio_irq_startup, + .shutdown = emma2rh_gpio_irq_shutdown, + .enable = emma2rh_gpio_irq_enable, + .disable = emma2rh_gpio_irq_disable, + .ack = emma2rh_gpio_irq_ack, + .end = emma2rh_gpio_irq_end, + .set_affinity = NULL, +}; + +void emma2rh_gpio_irq_init(u32 irq_base) +{ + u32 i; + + for (i = irq_base; i < irq_base + NUM_EMMA2RH_IRQ_GPIO; i++) { + irq_desc[i].status = IRQ_DISABLED; + irq_desc[i].action = NULL; + irq_desc[i].depth = 2; + irq_desc[i].handler = &emma2rh_gpio_irq_controller; + } + + emma2rh_gpio_irq_base = irq_base; +} + +void ll_emma2rh_gpio_irq_enable(int irq) +{ + u32 reg; + + db_assert(irq >= 0); + db_assert(irq < NUM_EMMA2RH_IRQ_GPIO); + + reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK); + reg |= 1 << irq; + emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg); +} + +void ll_emma2rh_gpio_irq_disable(int irq) +{ + u32 reg; + + db_assert(irq >= 0); + db_assert(irq < NUM_EMMA2RH_IRQ_GPIO); + + reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK); + reg &= ~(1 << irq); + emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg); +} diff --git a/arch/mips/emma2rh/markeins/led.c b/arch/mips/emma2rh/markeins/led.c new file mode 100644 index 0000000..b65254c --- /dev/null +++ b/arch/mips/emma2rh/markeins/led.c @@ -0,0 +1,60 @@ +/* + * arch/mips/emma2rh/markeins/led.c + * This file defines the led display for Mark-eins. + * + * Copyright (C) NEC Electronics Corporation 2004-2006 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/string.h> +#include <asm/emma2rh/emma2rh.h> + +const unsigned long clear = 0x20202020; + +#define LED_BASE 0xb1400038 + +void markeins_led_clear(void) +{ + emma2rh_out32(LED_BASE, clear); + emma2rh_out32(LED_BASE + 4, clear); +} + +void markeins_led(const char *str) +{ + int i; + int len = strlen(str); + + markeins_led_clear(); + if (len > 8) + len = 8; + + if (emma2rh_in32(0xb0000800) & (0x1 << 18)) + for (i = 0; i < len; i++) + emma2rh_out8(LED_BASE + i, str[i]); + else + for (i = 0; i < len; i++) + emma2rh_out8(LED_BASE + (i & 4) + (3 - (i & 3)), + str[i]); +} + +void markeins_led_hex(u32 val) +{ + char str[10]; + + sprintf(str, "%08x", val); + markeins_led(str); +} diff --git a/arch/mips/emma2rh/markeins/platform.c b/arch/mips/emma2rh/markeins/platform.c new file mode 100644 index 0000000..6c1eeae --- /dev/null +++ b/arch/mips/emma2rh/markeins/platform.c @@ -0,0 +1,170 @@ +/* + * arch/mips/emma2rh/markeins/platofrm.c + * This file sets up platform devices for EMMA2RH Mark-eins. + * + * Copyright(C) MontaVista Software Inc, 2006 + * + * Author: dmitry pervushin <dpervushin@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/config.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/ioport.h> +#include <linux/serial_8250.h> +#include <linux/mtd/physmap.h> + +#include <asm/cpu.h> +#include <asm/bootinfo.h> +#include <asm/addrspace.h> +#include <asm/time.h> +#include <asm/bcache.h> +#include <asm/irq.h> +#include <asm/reboot.h> +#include <asm/gdb-stub.h> +#include <asm/traps.h> +#include <asm/debug.h> + +#include <asm/emma2rh/emma2rh.h> + + +#define I2C_EMMA2RH "emma2rh-iic" /* must be in sync with IIC driver */ + +static struct resource i2c_emma_resources_0[] = { + { NULL, EMMA2RH_IRQ_PIIC0, EMMA2RH_IRQ_PIIC0, IORESOURCE_IRQ }, + { NULL, KSEG1ADDR(EMMA2RH_PIIC0_BASE), KSEG1ADDR(EMMA2RH_PIIC0_BASE + 0x1000), 0 }, +}; + +struct resource i2c_emma_resources_1[] = { + { NULL, EMMA2RH_IRQ_PIIC1, EMMA2RH_IRQ_PIIC1, IORESOURCE_IRQ }, + { NULL, KSEG1ADDR(EMMA2RH_PIIC1_BASE), KSEG1ADDR(EMMA2RH_PIIC1_BASE + 0x1000), 0 }, +}; + +struct resource i2c_emma_resources_2[] = { + { NULL, EMMA2RH_IRQ_PIIC2, EMMA2RH_IRQ_PIIC2, IORESOURCE_IRQ }, + { NULL, KSEG1ADDR(EMMA2RH_PIIC2_BASE), KSEG1ADDR(EMMA2RH_PIIC2_BASE + 0x1000), 0 }, +}; + +struct platform_device i2c_emma_devices[] = { + [0] = { + .name = I2C_EMMA2RH, + .id = 0, + .resource = i2c_emma_resources_0, + .num_resources = ARRAY_SIZE(i2c_emma_resources_0), + }, + [1] = { + .name = I2C_EMMA2RH, + .id = 1, + .resource = i2c_emma_resources_1, + .num_resources = ARRAY_SIZE(i2c_emma_resources_1), + }, + [2] = { + .name = I2C_EMMA2RH, + .id = 2, + .resource = i2c_emma_resources_2, + .num_resources = ARRAY_SIZE(i2c_emma_resources_2), + }, +}; + +#define EMMA2RH_SERIAL_CLOCK 18544000 +#define EMMA2RH_SERIAL_FLAGS UPF_BOOT_AUTOCONF | UPF_SKIP_TEST + +static struct plat_serial8250_port platform_serial_ports[] = { + [0] = { + .membase = (void __iomem*)KSEG1ADDR(EMMA2RH_PFUR0_BASE + 3), + .irq = EMMA2RH_IRQ_PFUR0, + .uartclk = EMMA2RH_SERIAL_CLOCK, + .regshift = 4, + .iotype = UPIO_MEM, + .flags = EMMA2RH_SERIAL_FLAGS, + }, + [1] = { + .membase = (void __iomem*)KSEG1ADDR(EMMA2RH_PFUR1_BASE + 3), + .irq = EMMA2RH_IRQ_PFUR1, + .uartclk = EMMA2RH_SERIAL_CLOCK, + .regshift = 4, + .iotype = UPIO_MEM, + .flags = EMMA2RH_SERIAL_FLAGS, + }, + [2] = { + .membase = (void __iomem*)KSEG1ADDR(EMMA2RH_PFUR2_BASE + 3), + .irq = EMMA2RH_IRQ_PFUR2, + .uartclk = EMMA2RH_SERIAL_CLOCK, + .regshift = 4, + .iotype = UPIO_MEM, + .flags = EMMA2RH_SERIAL_FLAGS, + }, + [3] = { + .flags = 0, + }, +}; + +static struct platform_device serial_emma = { + .name = "serial8250", + .dev = { + .platform_data = &platform_serial_ports, + }, +}; + +static struct platform_device *devices[] = { + &i2c_emma_devices[0], + &i2c_emma_devices[1], + &i2c_emma_devices[2], + &serial_emma, +}; + +static struct mtd_partition markeins_parts[] = { + [0] = { + .name = "RootFS", + .offset = 0x00000000, + .size = 0x00c00000, + }, + [1] = { + .name = "boot code area", + .offset = MTDPART_OFS_APPEND, + .size = 0x00100000, + }, + [2] = { + .name = "kernel image", + .offset = MTDPART_OFS_APPEND, + .size = 0x00300000, + }, + [3] = { + .name = "RootFS2", + .offset = MTDPART_OFS_APPEND, + .size = 0x00c00000, + }, + [4] = { + .name = "boot code area2", + .offset = MTDPART_OFS_APPEND, + .size = 0x00100000, + }, + [5] = { + .name = "kernel image2", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static int __init platform_devices_setup(void) +{ + physmap_set_partitions(markeins_parts, ARRAY_SIZE(markeins_parts)); + return platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +arch_initcall(platform_devices_setup); + diff --git a/arch/mips/emma2rh/markeins/setup.c b/arch/mips/emma2rh/markeins/setup.c new file mode 100644 index 0000000..7d98fdb --- /dev/null +++ b/arch/mips/emma2rh/markeins/setup.c @@ -0,0 +1,182 @@ +/* + * arch/mips/emma2rh/markeins/setup.c + * This file is setup for EMMA2RH Mark-eins. + * + * Copyright (C) NEC Electronics Corporation 2004-2006 + * + * This file is based on the arch/mips/ddb5xxx/ddb5477/setup.c. + * + * Copyright 2001 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/config.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/initrd.h> +#include <linux/irq.h> +#include <linux/ide.h> +#include <linux/ioport.h> +#include <linux/param.h> /* for HZ */ +#include <linux/root_dev.h> +#include <linux/serial.h> +#include <linux/serial_core.h> + +#include <asm/cpu.h> +#include <asm/bootinfo.h> +#include <asm/addrspace.h> +#include <asm/time.h> +#include <asm/bcache.h> +#include <asm/irq.h> +#include <asm/reboot.h> +#include <asm/gdb-stub.h> +#include <asm/traps.h> +#include <asm/debug.h> + +#include <asm/emma2rh/emma2rh.h> + +#define USE_CPU_COUNTER_TIMER /* whether we use cpu counter */ + +extern void markeins_led(const char *); + +static int bus_frequency = 0; + +static void markeins_machine_restart(char *command) +{ + static void (*back_to_prom) (void) = (void (*)(void))0xbfc00000; + + printk("cannot EMMA2RH Mark-eins restart.\n"); + markeins_led("restart."); + back_to_prom(); +} + +static void markeins_machine_halt(void) +{ + printk("EMMA2RH Mark-eins halted.\n"); + markeins_led("halted."); + while (1) ; +} + +static void markeins_machine_power_off(void) +{ + printk("EMMA2RH Mark-eins halted. Please turn off the power.\n"); + markeins_led("poweroff."); + while (1) ; +} + +static unsigned long clock[4] = { 166500000, 187312500, 199800000, 210600000 }; + +static unsigned int __init detect_bus_frequency(unsigned long rtc_base) +{ + u32 reg; + + /* detect from boot strap */ + reg = emma2rh_in32(EMMA2RH_BHIF_STRAP_0); + reg = (reg >> 4) & 0x3; + return clock[reg]; +} + +static void __init emma2rh_time_init(void) +{ + u32 reg; + if (bus_frequency == 0) + bus_frequency = detect_bus_frequency(0); + + reg = emma2rh_in32(EMMA2RH_BHIF_STRAP_0); + if ((reg & 0x3) == 0) + reg = (reg >> 6) & 0x3; + else { + reg = emma2rh_in32(EMMA2RH_BHIF_MAIN_CTRL); + reg = (reg >> 4) & 0x3; + } + mips_hpt_frequency = (bus_frequency * (4 + reg)) / 4 / 2; +} + +static void __init emma2rh_timer_setup(struct irqaction *irq) +{ + /* we are using the cpu counter for timer interrupts */ + setup_irq(CPU_IRQ_BASE + 7, irq); +} + +static void markeins_board_init(void); +extern void markeins_irq_setup(void); + +static void inline __init markeins_sio_setup(void) +{ +#ifdef CONFIG_KGDB_8250 + struct uart_port emma_port; + + memset(&emma_port, 0, sizeof(emma_port)); + + emma_port.flags = + UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; + emma_port.iotype = UPIO_MEM; + emma_port.regshift = 4; /* I/O addresses are every 8 bytes */ + emma_port.uartclk = 18544000; /* Clock rate of the chip */ + + emma_port.line = 0; + emma_port.mapbase = KSEG1ADDR(EMMA2RH_PFUR0_BASE + 3); + emma_port.membase = (u8*)emma_port.mapbase; + early_serial_setup(&emma_port); + + emma_port.line = 1; + emma_port.mapbase = KSEG1ADDR(EMMA2RH_PFUR1_BASE + 3); + emma_port.membase = (u8*)emma_port.mapbase; + early_serial_setup(&emma_port); + + emma_port.irq = EMMA2RH_IRQ_PFUR1; + kgdb8250_add_port(1, &emma_port); +#endif +} + +void __init plat_mem_setup(void) +{ + /* initialize board - we don't trust the loader */ + markeins_board_init(); + + set_io_port_base(KSEG1ADDR(EMMA2RH_PCI_IO_BASE)); + + board_time_init = emma2rh_time_init; + board_timer_setup = emma2rh_timer_setup; + + _machine_restart = markeins_machine_restart; + _machine_halt = markeins_machine_halt; + pm_power_off = markeins_machine_power_off; + + /* setup resource limits */ + ioport_resource.start = EMMA2RH_PCI_IO_BASE; + ioport_resource.end = EMMA2RH_PCI_IO_BASE + EMMA2RH_PCI_IO_SIZE - 1; + iomem_resource.start = EMMA2RH_IO_BASE; + iomem_resource.end = EMMA2RH_ROM_BASE - 1; + + /* Reboot on panic */ + panic_timeout = 180; + + markeins_sio_setup(); +} + +static void __init markeins_board_init(void) +{ + u32 val; + + val = emma2rh_in32(EMMA2RH_PBRD_INT_EN); /* open serial interrupts. */ + emma2rh_out32(EMMA2RH_PBRD_INT_EN, val | 0xaa); + val = emma2rh_in32(EMMA2RH_PBRD_CLKSEL); /* set serial clocks. */ + emma2rh_out32(EMMA2RH_PBRD_CLKSEL, val | 0x5); /* 18MHz */ + emma2rh_out32(EMMA2RH_PCI_CONTROL, 0); + + markeins_led("MVL E2RH"); +} diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index c5f5516..56000a0 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_MIPS_NILE4) += ops-nile4.o obj-$(CONFIG_MIPS_TX3927) += ops-tx3927.o obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o obj-$(CONFIG_NEC_CMBVR4133) += fixup-vr4133.o +obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o # # These are still pretty much in the old state, watch, go blind. diff --git a/arch/mips/pci/fixup-emma2rh.c b/arch/mips/pci/fixup-emma2rh.c new file mode 100644 index 0000000..3a34cd0 --- /dev/null +++ b/arch/mips/pci/fixup-emma2rh.c @@ -0,0 +1,102 @@ +/* + * arch/mips/pci/fixup-emma2rh.c + * This file defines the PCI configration. + * + * Copyright (C) NEC Electronics Corporation 2004-2006 + * + * This file is based on the arch/mips/ddb5xxx/ddb5477/pci.c + * + * Copyright 2001 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/pci.h> + +#include <asm/bootinfo.h> +#include <asm/debug.h> + +#include <asm/emma2rh/emma2rh.h> + +#define EMMA2RH_PCI_HOST_SLOT 0x09 +#define EMMA2RH_USB_SLOT 0x03 +#define PCI_DEVICE_ID_NEC_EMMA2RH 0x014b /* EMMA2RH PCI Host */ + +/* + * we fix up irqs based on the slot number. + * The first entry is at AD:11. + * Fortunately this works because, although we have two pci buses, + * they all have different slot numbers (except for rockhopper slot 20 + * which is handled below). + * + */ + +#define MAX_SLOT_NUM 10 +static unsigned char irq_map[][5] __initdata = { + [3] = {0, MARKEINS_PCI_IRQ_INTB, MARKEINS_PCI_IRQ_INTC, + MARKEINS_PCI_IRQ_INTD, 0,}, + [4] = {0, MARKEINS_PCI_IRQ_INTA, 0, 0, 0,}, + [5] = {0, 0, 0, 0, 0,}, + [6] = {0, MARKEINS_PCI_IRQ_INTC, MARKEINS_PCI_IRQ_INTD, + MARKEINS_PCI_IRQ_INTA, MARKEINS_PCI_IRQ_INTB,}, +}; + +static void __devinit nec_usb_controller_fixup(struct pci_dev *dev) +{ + if (PCI_SLOT(dev->devfn) == EMMA2RH_USB_SLOT) + /* on board USB controller configuration */ + pci_write_config_dword(dev, 0xe4, 1 << 5); +} + +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB, + nec_usb_controller_fixup); + +/* + * Prevent the PCI layer from seeing the resources allocated to this device + * if it is the host bridge by marking it as such. These resources are of + * no consequence to the PCI layer (they are handled elsewhere). + */ +static void __devinit emma2rh_pci_host_fixup(struct pci_dev *dev) +{ + int i; + + if (PCI_SLOT(dev->devfn) == EMMA2RH_PCI_HOST_SLOT) { + dev->class &= 0xff; + dev->class |= PCI_CLASS_BRIDGE_HOST << 8; + for (i = 0; i < PCI_NUM_RESOURCES; i++) { + dev->resource[i].start = 0; + dev->resource[i].end = 0; + dev->resource[i].flags = 0; + } + } +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_EMMA2RH, + emma2rh_pci_host_fixup); + +int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + return irq_map[slot][pin]; +} + +/* Do platform specific device initialization at pci_enable_device() time */ +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + return 0; +} diff --git a/arch/mips/pci/ops-emma2rh.c b/arch/mips/pci/ops-emma2rh.c new file mode 100644 index 0000000..e21b11b --- /dev/null +++ b/arch/mips/pci/ops-emma2rh.c @@ -0,0 +1,186 @@ +/* + * arch/mips/pci/ops-emma2rh.c + * This file defines the PCI operation for EMMA2RH. + * + * Copyright (C) NEC Electronics Corporation 2004-2006 + * + * This file is based on the arch/mips/pci/ops-vr41xx.c + * + * Copyright 2001 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/config.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/types.h> + +#include <asm/addrspace.h> +#include <asm/debug.h> + +#include <asm/emma2rh/emma2rh.h> + +#define RTABORT (0x1<<9) +#define RMABORT (0x1<<10) +#define EMMA2RH_PCI_SLOT_NUM 9 /* 0000:09.0 is final PCI device */ + +/* + * access config space + */ + +static int check_args(struct pci_bus *bus, u32 devfn, u32 * bus_num) +{ + /* check if the bus is top-level */ + if (bus->parent != NULL) { + *bus_num = bus->number; + db_assert(bus_num != 0); + } else + *bus_num = 0; + + if (*bus_num == 0) { + /* Type 0 */ + if (PCI_SLOT(devfn) >= 10) + return PCIBIOS_DEVICE_NOT_FOUND; + } else { + /* Type 1 */ + if ((*bus_num >= 64) || (PCI_SLOT(devfn) >= 16)) + return PCIBIOS_DEVICE_NOT_FOUND; + } + return 0; +} + +static inline int set_pci_configuration_address(unsigned char bus_num, + unsigned int devfn, int where) +{ + u32 config_win0; + + emma2rh_out32(EMMA2RH_PCI_INT, ~RMABORT); + if (bus_num == 0) + /* + * Type 0 configuration + */ + config_win0 = (1 << (22 + PCI_SLOT(devfn))) | (5 << 9); + else + /* + * Type 1 configuration + */ + config_win0 = (bus_num << 26) | (PCI_SLOT(devfn) << 22) | + (1 << 15) | (5 << 9); + + emma2rh_out32(EMMA2RH_PCI_IWIN0_CTR, config_win0); + + return 0; +} + +static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where, + int size, uint32_t * val) +{ + u32 bus_num; + u32 base = KSEG1ADDR(EMMA2RH_PCI_CONFIG_BASE); + u32 backup_win0; + u32 data; + + *val = 0xffffffffU; + + if (check_args(bus, devfn, &bus_num) == PCIBIOS_DEVICE_NOT_FOUND) + return PCIBIOS_DEVICE_NOT_FOUND; + + backup_win0 = emma2rh_in32(EMMA2RH_PCI_IWIN0_CTR); + + if (set_pci_configuration_address(bus_num, devfn, where) < 0) + return PCIBIOS_DEVICE_NOT_FOUND; + + data = + *(volatile u32 *)(base + (PCI_FUNC(devfn) << 8) + + (where & 0xfffffffc)); + + switch (size) { + case 1: + *val = (data >> ((where & 3) << 3)) & 0xffU; + break; + case 2: + *val = (data >> ((where & 2) << 3)) & 0xffffU; + break; + case 4: + *val = data; + break; + default: + emma2rh_out32(EMMA2RH_PCI_IWIN0_CTR, backup_win0); + return PCIBIOS_FUNC_NOT_SUPPORTED; + } + + emma2rh_out32(EMMA2RH_PCI_IWIN0_CTR, backup_win0); + + if (emma2rh_in32(EMMA2RH_PCI_INT) & RMABORT) + return PCIBIOS_DEVICE_NOT_FOUND; + + return PCIBIOS_SUCCESSFUL; +} + +static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 val) +{ + u32 bus_num; + u32 base = KSEG1ADDR(EMMA2RH_PCI_CONFIG_BASE); + u32 backup_win0; + u32 data; + int shift; + + if (check_args(bus, devfn, &bus_num) == PCIBIOS_DEVICE_NOT_FOUND) + return PCIBIOS_DEVICE_NOT_FOUND; + + backup_win0 = emma2rh_in32(EMMA2RH_PCI_IWIN0_CTR); + + if (set_pci_configuration_address(bus_num, devfn, where) < 0) + return PCIBIOS_DEVICE_NOT_FOUND; + + /* read modify write */ + data = + *(volatile u32 *)(base + (PCI_FUNC(devfn) << 8) + + (where & 0xfffffffc)); + + switch (size) { + case 1: + shift = (where & 3) << 3; + data &= ~(0xffU << shift); + data |= ((val & 0xffU) << shift); + break; + case 2: + shift = (where & 2) << 3; + data &= ~(0xffffU << shift); + data |= ((val & 0xffffU) << shift); + break; + case 4: + data = val; + break; + default: + emma2rh_out32(EMMA2RH_PCI_IWIN0_CTR, backup_win0); + return PCIBIOS_FUNC_NOT_SUPPORTED; + } + *(volatile u32 *)(base + (PCI_FUNC(devfn) << 8) + + (where & 0xfffffffc)) = data; + + emma2rh_out32(EMMA2RH_PCI_IWIN0_CTR, backup_win0); + if (emma2rh_in32(EMMA2RH_PCI_INT) & RMABORT) + return PCIBIOS_DEVICE_NOT_FOUND; + + return PCIBIOS_SUCCESSFUL; +} + +struct pci_ops emma2rh_pci_ops = { + .read = pci_config_read, + .write = pci_config_write, +}; diff --git a/arch/mips/pci/pci-emma2rh.c b/arch/mips/pci/pci-emma2rh.c new file mode 100644 index 0000000..0f8b230 --- /dev/null +++ b/arch/mips/pci/pci-emma2rh.c @@ -0,0 +1,90 @@ +/* + * arch/mips/pci/pci-emma2rh.c + * This file defines the PCI configration. + * + * Copyright (C) NEC Electronics Corporation 2004-2006 + * + * This file is based on the arch/mips/ddb5xxx/ddb5477/pci.c + * + * Copyright 2001 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/pci.h> + +#include <asm/bootinfo.h> +#include <asm/debug.h> + +#include <asm/emma2rh/emma2rh.h> + +static struct resource pci_io_resource = { + .name = "pci IO space", + .start = EMMA2RH_PCI_IO_BASE, + .end = EMMA2RH_PCI_IO_BASE + EMMA2RH_PCI_IO_SIZE - 1, + .flags = IORESOURCE_IO, +}; + +static struct resource pci_mem_resource = { + .name = "pci memory space", + .start = EMMA2RH_PCI_MEM_BASE, + .end = EMMA2RH_PCI_MEM_BASE + EMMA2RH_PCI_MEM_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +extern struct pci_ops emma2rh_pci_ops; + +static struct pci_controller emma2rh_pci_controller = { + .pci_ops = &emma2rh_pci_ops, + .mem_resource = &pci_mem_resource, + .io_resource = &pci_io_resource, + .mem_offset = -0x04000000, + .io_offset = 0, +}; + +static void __init emma2rh_pci_init(void) +{ + /* setup PCI interface */ + emma2rh_out32(EMMA2RH_PCI_ARBIT_CTR, 0x70f); + + emma2rh_out32(EMMA2RH_PCI_IWIN0_CTR, 0x80000a18); + emma2rh_out32(EMMA2RH_PCI_CONFIG_BASE + PCI_COMMAND, + PCI_STATUS_DEVSEL_MEDIUM | PCI_STATUS_CAP_LIST | + PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); + emma2rh_out32(EMMA2RH_PCI_CONFIG_BASE + PCI_BASE_ADDRESS_0, 0x10000000); + emma2rh_out32(EMMA2RH_PCI_CONFIG_BASE + PCI_BASE_ADDRESS_1, 0x00000000); + + emma2rh_out32(EMMA2RH_PCI_IWIN0_CTR, 0x12000000 | 0x218); + emma2rh_out32(EMMA2RH_PCI_IWIN1_CTR, 0x18000000 | 0x600); + emma2rh_out32(EMMA2RH_PCI_INIT_ESWP, 0x00000200); + + emma2rh_out32(EMMA2RH_PCI_TWIN_CTR, 0x00009200); + emma2rh_out32(EMMA2RH_PCI_TWIN_BADR, 0x00000000); + emma2rh_out32(EMMA2RH_PCI_TWIN0_DADR, 0x00000000); + emma2rh_out32(EMMA2RH_PCI_TWIN1_DADR, 0x00000000); +} + +static int __init emma2rh_pci_setup(void) +{ + emma2rh_pci_init(); + register_pci_controller(&emma2rh_pci_controller); + return 0; +} + +arch_initcall(emma2rh_pci_setup); |