diff options
author | Mikael Starvik <mikael.starvik@axis.com> | 2005-07-27 11:44:30 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@g5.osdl.org> | 2005-07-27 16:25:59 -0700 |
commit | 3e41d6522a6922a95f9d953f4171b45b82b3d6f4 (patch) | |
tree | 61f406f442ec3db540322c802d06a67f8dbd8eb7 /arch | |
parent | cb09f540a1c5e6c5beb6e82f554d51a1f2c87e67 (diff) | |
download | kernel_samsung_smdk4412-3e41d6522a6922a95f9d953f4171b45b82b3d6f4.zip kernel_samsung_smdk4412-3e41d6522a6922a95f9d953f4171b45b82b3d6f4.tar.gz kernel_samsung_smdk4412-3e41d6522a6922a95f9d953f4171b45b82b3d6f4.tar.bz2 |
[PATCH] CRIS update: configuration and build
Changes to configuration and build system.
* Added v32 sub architecture.
* Use generic hard IRQ.
* Added SMP options.
* Added options to OOPS at NMI and reboot at OOM.
* Made it possible to set objtree.
* Added option to select Kernel GDB serial port.
* Corrected Kconfig usage.
* Added system profiler.
Signed-off-by: Mikael Starvik <starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'arch')
-rw-r--r-- | arch/cris/Kconfig.debug | 5 | ||||
-rw-r--r-- | arch/cris/Makefile | 66 | ||||
-rw-r--r-- | arch/cris/arch-v10/Kconfig | 31 | ||||
-rw-r--r-- | arch/cris/arch-v10/boot/Makefile | 9 | ||||
-rw-r--r-- | arch/cris/arch-v10/boot/compressed/Makefile | 43 | ||||
-rw-r--r-- | arch/cris/arch-v10/boot/rescue/Makefile | 45 | ||||
-rw-r--r-- | arch/cris/arch-v10/drivers/Kconfig | 250 | ||||
-rw-r--r-- | arch/cris/defconfig | 376 | ||||
-rw-r--r-- | arch/cris/kernel/Makefile | 3 |
9 files changed, 515 insertions, 313 deletions
diff --git a/arch/cris/Kconfig.debug b/arch/cris/Kconfig.debug index f42918b..cd72324 100644 --- a/arch/cris/Kconfig.debug +++ b/arch/cris/Kconfig.debug @@ -38,4 +38,9 @@ config FRAME_POINTER If you don't debug the kernel, you can say N, but we may not be able to solve problems without frame pointers. +config DEBUG_NMI_OOPS + bool "NMI causes oops printout" + help + If the system locks up without any debug information you can say Y + here to make it possible to dump an OOPS with an external NMI. endmenu diff --git a/arch/cris/Makefile b/arch/cris/Makefile index 9d28fa8..90ca873 100644 --- a/arch/cris/Makefile +++ b/arch/cris/Makefile @@ -1,4 +1,4 @@ -# $Id: Makefile,v 1.23 2004/10/19 13:07:34 starvik Exp $ +# $Id: Makefile,v 1.28 2005/03/17 10:44:37 larsv Exp $ # cris/Makefile # # This file is included by the global makefile so that you can add your own @@ -15,6 +15,7 @@ arch-y := v10 arch-$(CONFIG_ETRAX_ARCH_V10) := v10 +arch-$(CONFIG_ETRAX_ARCH_V32) := v32 # No config avaiable for make clean etc ifneq ($(arch-y),) @@ -46,6 +47,21 @@ core-y += arch/$(ARCH)/$(SARCH)/kernel/ arch/$(ARCH)/$(SARCH)/mm/ drivers-y += arch/$(ARCH)/$(SARCH)/drivers/ libs-y += arch/$(ARCH)/$(SARCH)/lib/ $(LIBGCC) +# cris source path +SRC_ARCH = $(srctree)/arch/$(ARCH) +# cris object files path +OBJ_ARCH = $(objtree)/arch/$(ARCH) + +target_boot_arch_dir = $(OBJ_ARCH)/$(SARCH)/boot +target_boot_dir = $(OBJ_ARCH)/boot +src_boot_dir = $(SRC_ARCH)/boot +target_compressed_dir = $(OBJ_ARCH)/boot/compressed +src_compressed_dir = $(SRC_ARCH)/boot/compressed +target_rescue_dir = $(OBJ_ARCH)/boot/rescue +src_rescue_dir = $(SRC_ARCH)/boot/rescue + +export target_boot_arch_dir target_boot_dir src_boot_dir target_compressed_dir src_compressed_dir target_rescue_dir src_rescue_dir + vmlinux.bin: vmlinux $(OBJCOPY) $(OBJCOPYFLAGS) vmlinux vmlinux.bin @@ -65,44 +81,52 @@ cramfs: clinux: vmlinux.bin decompress.bin rescue.bin -decompress.bin: FORCE - @make -C arch/$(ARCH)/boot/compressed decompress.bin +decompress.bin: $(target_boot_dir) + @$(MAKE) -f $(src_compressed_dir)/Makefile $(target_compressed_dir)/decompress.bin -rescue.bin: FORCE - @make -C arch/$(ARCH)/boot/rescue rescue.bin +$(target_rescue_dir)/rescue.bin: $(target_boot_dir) + @$(MAKE) -f $(src_rescue_dir)/Makefile $(target_rescue_dir)/rescue.bin -zImage: vmlinux.bin rescue.bin +zImage: $(target_boot_dir) vmlinux.bin $(target_rescue_dir)/rescue.bin ## zImage - Compressed kernel (gzip) - @make -C arch/$(ARCH)/boot/ zImage + @$(MAKE) -f $(src_boot_dir)/Makefile zImage + +$(target_boot_dir): $(target_boot_arch_dir) + ln -sfn $< $@ + +$(target_boot_arch_dir): + mkdir -p $@ compressed: zImage archmrproper: archclean: - $(Q)$(MAKE) $(clean)=arch/$(ARCH)/boot + @if [ -d arch/$(ARCH)/boot ]; then \ + $(MAKE) $(clean)=arch/$(ARCH)/boot ; \ + fi rm -f timage vmlinux.bin decompress.bin rescue.bin cramfs.img rm -rf $(LD_SCRIPT).tmp -prepare: arch/$(ARCH)/.links include/asm-$(ARCH)/.arch \ +prepare: $(SRC_ARCH)/.links $(srctree)/include/asm-$(ARCH)/.arch \ include/asm-$(ARCH)/$(SARCH)/offset.h # Create some links to make all tools happy -arch/$(ARCH)/.links: - @rm -rf arch/$(ARCH)/drivers - @ln -sfn $(SARCH)/drivers arch/$(ARCH)/drivers - @rm -rf arch/$(ARCH)/boot - @ln -sfn $(SARCH)/boot arch/$(ARCH)/boot - @rm -rf arch/$(ARCH)/lib - @ln -sfn $(SARCH)/lib arch/$(ARCH)/lib - @ln -sfn $(SARCH) arch/$(ARCH)/arch - @ln -sfn ../$(SARCH)/vmlinux.lds.S arch/$(ARCH)/kernel/vmlinux.lds.S +$(SRC_ARCH)/.links: + @rm -rf $(SRC_ARCH)/drivers + @ln -sfn $(SRC_ARCH)/$(SARCH)/drivers $(SRC_ARCH)/drivers + @rm -rf $(SRC_ARCH)/boot + @ln -sfn $(SRC_ARCH)/$(SARCH)/boot $(SRC_ARCH)/boot + @rm -rf $(SRC_ARCH)/lib + @ln -sfn $(SRC_ARCH)/$(SARCH)/lib $(SRC_ARCH)/lib + @ln -sfn $(SRC_ARCH)/$(SARCH) $(SRC_ARCH)/arch + @ln -sfn $(SRC_ARCH)/$(SARCH)/vmlinux.lds.S $(SRC_ARCH)/kernel/vmlinux.lds.S @touch $@ # Create link to sub arch includes -include/asm-$(ARCH)/.arch: $(wildcard include/config/arch/*.h) - @echo ' Making asm-$(ARCH)/arch -> asm-$(ARCH)/$(SARCH) symlink' +$(srctree)/include/asm-$(ARCH)/.arch: $(wildcard include/config/arch/*.h) + @echo ' Making $(srctree)/include/asm-$(ARCH)/arch -> $(srctree)/include/asm-$(ARCH)/$(SARCH) symlink' @rm -f include/asm-$(ARCH)/arch - @ln -sf $(SARCH) include/asm-$(ARCH)/arch + @ln -sf $(srctree)/include/asm-$(ARCH)/$(SARCH) $(srctree)/include/asm-$(ARCH)/arch @touch $@ arch/$(ARCH)/$(SARCH)/kernel/asm-offsets.s: include/asm include/linux/version.h \ diff --git a/arch/cris/arch-v10/Kconfig b/arch/cris/arch-v10/Kconfig index 2ca64cc..44eb1b9 100644 --- a/arch/cris/arch-v10/Kconfig +++ b/arch/cris/arch-v10/Kconfig @@ -260,6 +260,37 @@ config ETRAX_DEBUG_PORT_NULL endchoice choice + prompt "Kernel GDB port" + depends on ETRAX_KGDB + default ETRAX_KGDB_PORT0 + help + Choose a serial port for kernel debugging. NOTE: This port should + not be enabled under Drivers for built-in interfaces (as it has its + own initialization code) and should not be the same as the debug port. + +config ETRAX_KGDB_PORT0 + bool "Serial-0" + help + Use serial port 0 for kernel debugging. + +config ETRAX_KGDB_PORT1 + bool "Serial-1" + help + Use serial port 1 for kernel debugging. + +config ETRAX_KGDB_PORT2 + bool "Serial-2" + help + Use serial port 2 for kernel debugging. + +config ETRAX_KGDB_PORT3 + bool "Serial-3" + help + Use serial port 3 for kernel debugging. + +endchoice + +choice prompt "Product rescue-port" depends on ETRAX_ARCH_V10 default ETRAX_RESCUE_SER0 diff --git a/arch/cris/arch-v10/boot/Makefile b/arch/cris/arch-v10/boot/Makefile index fe66503..e5b1058 100644 --- a/arch/cris/arch-v10/boot/Makefile +++ b/arch/cris/arch-v10/boot/Makefile @@ -1,12 +1,13 @@ # # arch/cris/boot/Makefile # +target = $(target_boot_dir) +src = $(src_boot_dir) zImage: compressed/vmlinuz -compressed/vmlinuz: $(TOPDIR)/vmlinux - @$(MAKE) -C compressed vmlinuz +compressed/vmlinuz: + @$(MAKE) -f $(src)/compressed/Makefile $(target_compressed_dir)/vmlinuz clean: - rm -f zImage tools/build compressed/vmlinux.out - @$(MAKE) -C compressed clean + @$(MAKE) -f $(src)/compressed/Makefile clean diff --git a/arch/cris/arch-v10/boot/compressed/Makefile b/arch/cris/arch-v10/boot/compressed/Makefile index 5f71c2c..6584a44 100644 --- a/arch/cris/arch-v10/boot/compressed/Makefile +++ b/arch/cris/arch-v10/boot/compressed/Makefile @@ -1,40 +1,45 @@ # -# linux/arch/etrax100/boot/compressed/Makefile -# -# create a compressed vmlinux image from the original vmlinux files and romfs +# create a compressed vmlinuz image from the binary vmlinux.bin file # +target = $(target_compressed_dir) +src = $(src_compressed_dir) -CC = gcc-cris -melf -I $(TOPDIR)/include +CC = gcc-cris -melf $(LINUXINCLUDE) CFLAGS = -O2 LD = ld-cris OBJCOPY = objcopy-cris OBJCOPYFLAGS = -O binary --remove-section=.bss -OBJECTS = head.o misc.o +OBJECTS = $(target)/head.o $(target)/misc.o # files to compress -SYSTEM = $(TOPDIR)/vmlinux.bin +SYSTEM = $(objtree)/vmlinux.bin -all: vmlinuz +all: $(target_compressed_dir)/vmlinuz -decompress.bin: $(OBJECTS) - $(LD) -T decompress.ld -o decompress.o $(OBJECTS) - $(OBJCOPY) $(OBJCOPYFLAGS) decompress.o decompress.bin -# save it for mkprod in the topdir. - cp decompress.bin $(TOPDIR) +$(target)/decompress.bin: $(OBJECTS) + $(LD) -T $(src)/decompress.ld -o $(target)/decompress.o $(OBJECTS) + $(OBJCOPY) $(OBJCOPYFLAGS) $(target)/decompress.o $(target)/decompress.bin +# Create vmlinuz image in top-level build directory +$(target_compressed_dir)/vmlinuz: $(target) piggy.img $(target)/decompress.bin + @echo " COMPR vmlinux.bin --> vmlinuz" + @cat $(target)/decompress.bin piggy.img > $(target_compressed_dir)/vmlinuz + @rm -f piggy.img -vmlinuz: piggy.img decompress.bin - cat decompress.bin piggy.img > vmlinuz - rm -f piggy.img +$(target)/head.o: $(src)/head.S + $(CC) -D__ASSEMBLY__ -traditional -c $< -o $@ -head.o: head.S - $(CC) -D__ASSEMBLY__ -traditional -c head.S -o head.o +$(target)/misc.o: $(src)/misc.c + $(CC) -D__KERNEL__ -c $< -o $@ # gzip the kernel image piggy.img: $(SYSTEM) - cat $(SYSTEM) | gzip -f -9 > piggy.img + @cat $(SYSTEM) | gzip -f -9 > piggy.img + +$(target): + mkdir -p $(target) clean: - rm -f piggy.img vmlinuz vmlinuz.o + rm -f piggy.img $(objtree)/vmlinuz diff --git a/arch/cris/arch-v10/boot/rescue/Makefile b/arch/cris/arch-v10/boot/rescue/Makefile index e9f2ba2..8be9b31 100644 --- a/arch/cris/arch-v10/boot/rescue/Makefile +++ b/arch/cris/arch-v10/boot/rescue/Makefile @@ -1,52 +1,53 @@ # # Makefile for rescue code # -ifndef TOPDIR -TOPDIR = ../../../.. -endif -CC = gcc-cris -mlinux -I $(TOPDIR)/include +target = $(target_rescue_dir) +src = $(src_rescue_dir) + +CC = gcc-cris -mlinux $(LINUXINCLUDE) CFLAGS = -O2 LD = gcc-cris -mlinux -nostdlib OBJCOPY = objcopy-cris OBJCOPYFLAGS = -O binary --remove-section=.bss -all: rescue.bin testrescue.bin kimagerescue.bin - -rescue: rescue.bin - # do nothing +all: $(target)/rescue.bin $(target)/testrescue.bin $(target)/kimagerescue.bin -rescue.bin: head.o - $(LD) -T rescue.ld -o rescue.o head.o - $(OBJCOPY) $(OBJCOPYFLAGS) rescue.o rescue.bin - cp rescue.bin $(TOPDIR) +$(target)/rescue.bin: $(target) $(target)/head.o + $(LD) -T $(src)/rescue.ld -o $(target)/rescue.o $(target)/head.o + $(OBJCOPY) $(OBJCOPYFLAGS) $(target)/rescue.o $(target)/rescue.bin +# Place a copy in top-level build directory + cp -p $(target)/rescue.bin $(objtree) -testrescue.bin: testrescue.o - $(OBJCOPY) $(OBJCOPYFLAGS) testrescue.o tr.bin +$(target)/testrescue.bin: $(target) $(target)/testrescue.o + $(OBJCOPY) $(OBJCOPYFLAGS) $(target)/testrescue.o tr.bin # Pad it to 784 bytes dd if=/dev/zero of=tmp2423 bs=1 count=784 cat tr.bin tmp2423 >testrescue_tmp.bin - dd if=testrescue_tmp.bin of=testrescue.bin bs=1 count=784 + dd if=testrescue_tmp.bin of=$(target)/testrescue.bin bs=1 count=784 rm tr.bin tmp2423 testrescue_tmp.bin -kimagerescue.bin: kimagerescue.o - $(OBJCOPY) $(OBJCOPYFLAGS) kimagerescue.o ktr.bin +$(target)/kimagerescue.bin: $(target) $(target)/kimagerescue.o + $(OBJCOPY) $(OBJCOPYFLAGS) $(target)/kimagerescue.o ktr.bin # Pad it to 784 bytes, that's what the rescue loader expects dd if=/dev/zero of=tmp2423 bs=1 count=784 cat ktr.bin tmp2423 >kimagerescue_tmp.bin - dd if=kimagerescue_tmp.bin of=kimagerescue.bin bs=1 count=784 + dd if=kimagerescue_tmp.bin of=$(target)/kimagerescue.bin bs=1 count=784 rm ktr.bin tmp2423 kimagerescue_tmp.bin -head.o: head.S +$(target): + mkdir -p $(target) + +$(target)/head.o: $(src)/head.S $(CC) -D__ASSEMBLY__ -traditional -c $< -o $*.o -testrescue.o: testrescue.S +$(target)/testrescue.o: $(src)/testrescue.S $(CC) -D__ASSEMBLY__ -traditional -c $< -o $*.o -kimagerescue.o: kimagerescue.S +$(target)/kimagerescue.o: $(src)/kimagerescue.S $(CC) -D__ASSEMBLY__ -traditional -c $< -o $*.o clean: - rm -f *.o *.bin + rm -f $(target)/*.o $(target)/*.bin fastdep: diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig index 748374f..8b50e84 100644 --- a/arch/cris/arch-v10/drivers/Kconfig +++ b/arch/cris/arch-v10/drivers/Kconfig @@ -1,17 +1,11 @@ config ETRAX_ETHERNET bool "Ethernet support" depends on ETRAX_ARCH_V10 + select NET_ETHERNET help This option enables the ETRAX 100LX built-in 10/100Mbit Ethernet controller. -# this is just so that the user does not have to go into the -# normal ethernet driver section just to enable ethernetworking -config NET_ETHERNET - bool - depends on ETRAX_ETHERNET - default y - choice prompt "Network LED behavior" depends on ETRAX_ETHERNET @@ -20,26 +14,26 @@ choice config ETRAX_NETWORK_LED_ON_WHEN_LINK bool "LED_on_when_link" help - Selecting LED_on_when_link will light the LED when there is a - connection and will flash off when there is activity. + Selecting LED_on_when_link will light the LED when there is a + connection and will flash off when there is activity. - Selecting LED_on_when_activity will light the LED only when + Selecting LED_on_when_activity will light the LED only when there is activity. - This setting will also affect the behaviour of other activity LEDs - e.g. Bluetooth. + This setting will also affect the behaviour of other activity LEDs + e.g. Bluetooth. config ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY bool "LED_on_when_activity" help - Selecting LED_on_when_link will light the LED when there is a - connection and will flash off when there is activity. + Selecting LED_on_when_link will light the LED when there is a + connection and will flash off when there is activity. - Selecting LED_on_when_activity will light the LED only when + Selecting LED_on_when_activity will light the LED only when there is activity. - This setting will also affect the behaviour of other activity LEDs - e.g. Bluetooth. + This setting will also affect the behaviour of other activity LEDs + e.g. Bluetooth. endchoice @@ -91,11 +85,11 @@ choice depends on ETRAX_SERIAL_PORT0 default ETRAX_SERIAL_PORT0_DMA6_OUT -config CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_OUT - bool "No DMA out" +config ETRAX_SERIAL_PORT0_NO_DMA_OUT + bool "No DMA out" -config CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT - bool "DMA 6" +config ETRAX_SERIAL_PORT0_DMA6_OUT + bool "DMA 6" endchoice @@ -104,11 +98,11 @@ choice depends on ETRAX_SERIAL_PORT0 default ETRAX_SERIAL_PORT0_DMA7_IN -config CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_IN - bool "No DMA in" +config ETRAX_SERIAL_PORT0_NO_DMA_IN + bool "No DMA in" -config CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN - bool "DMA 7" +config ETRAX_SERIAL_PORT0_DMA7_IN + bool "DMA 7" endchoice @@ -205,11 +199,11 @@ choice depends on ETRAX_SERIAL_PORT1 default ETRAX_SERIAL_PORT1_DMA8_OUT -config CONFIG_ETRAX_SERIAL_PORT1_NO_DMA_OUT - bool "No DMA out" +config ETRAX_SERIAL_PORT1_NO_DMA_OUT + bool "No DMA out" -config CONFIG_ETRAX_SERIAL_PORT1_DMA8_OUT - bool "DMA 8" +config ETRAX_SERIAL_PORT1_DMA8_OUT + bool "DMA 8" endchoice @@ -218,11 +212,11 @@ choice depends on ETRAX_SERIAL_PORT1 default ETRAX_SERIAL_PORT1_DMA9_IN -config CONFIG_ETRAX_SERIAL_PORT1_NO_DMA_IN - bool "No DMA in" +config ETRAX_SERIAL_PORT1_NO_DMA_IN + bool "No DMA in" -config CONFIG_ETRAX_SERIAL_PORT1_DMA9_IN - bool "DMA 9" +config ETRAX_SERIAL_PORT1_DMA9_IN + bool "DMA 9" endchoice @@ -308,7 +302,7 @@ config ETRAX_SER1_CD_ON_PB_BIT Specify the pin of the PB port to carry the CD signal for serial port 1. -comment "Make sure you dont have the same PB bits more than once!" +comment "Make sure you do not have the same PB bits more than once!" depends on ETRAX_SERIAL && ETRAX_SER0_DTR_RI_DSR_CD_ON_PB && ETRAX_SER1_DTR_RI_DSR_CD_ON_PB config ETRAX_SERIAL_PORT2 @@ -322,11 +316,11 @@ choice depends on ETRAX_SERIAL_PORT2 default ETRAX_SERIAL_PORT2_DMA2_OUT -config CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_OUT - bool "No DMA out" +config ETRAX_SERIAL_PORT2_NO_DMA_OUT + bool "No DMA out" -config CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT - bool "DMA 2" +config ETRAX_SERIAL_PORT2_DMA2_OUT + bool "DMA 2" endchoice @@ -335,11 +329,11 @@ choice depends on ETRAX_SERIAL_PORT2 default ETRAX_SERIAL_PORT2_DMA3_IN -config CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_IN - bool "No DMA in" +config ETRAX_SERIAL_PORT2_NO_DMA_IN + bool "No DMA in" -config CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN - bool "DMA 3" +config ETRAX_SERIAL_PORT2_DMA3_IN + bool "DMA 3" endchoice @@ -436,11 +430,11 @@ choice depends on ETRAX_SERIAL_PORT3 default ETRAX_SERIAL_PORT3_DMA4_OUT -config CONFIG_ETRAX_SERIAL_PORT3_NO_DMA_OUT - bool "No DMA out" +config ETRAX_SERIAL_PORT3_NO_DMA_OUT + bool "No DMA out" -config CONFIG_ETRAX_SERIAL_PORT3_DMA4_OUT - bool "DMA 4" +config ETRAX_SERIAL_PORT3_DMA4_OUT + bool "DMA 4" endchoice @@ -449,11 +443,11 @@ choice depends on ETRAX_SERIAL_PORT3 default ETRAX_SERIAL_PORT3_DMA5_IN -config CONFIG_ETRAX_SERIAL_PORT3_NO_DMA_IN - bool "No DMA in" +config ETRAX_SERIAL_PORT3_NO_DMA_IN + bool "No DMA in" -config CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN - bool "DMA 5" +config ETRAX_SERIAL_PORT3_DMA5_IN + bool "DMA 5" endchoice @@ -554,7 +548,6 @@ config ETRAX_IDE select BLK_DEV_IDEDISK select BLK_DEV_IDECD select BLK_DEV_IDEDMA - select DMA_NONPCI help Enable this to get support for ATA/IDE. You can't use paralell ports or SCSI ports @@ -579,7 +572,7 @@ config ETRAX_IDE_PB7_RESET IDE reset on pin 7 on port B config ETRAX_IDE_G27_RESET - bool "Port_G_Bit_27" + bool "Port_G_Bit_27" help IDE reset on pin 27 on port G @@ -588,30 +581,36 @@ endchoice config ETRAX_USB_HOST bool "USB host" + select USB help This option enables the host functionality of the ETRAX 100LX built-in USB controller. In host mode the controller is designed for CTRL and BULK traffic only, INTR traffic may work as well however (depending on the requirements of timeliness). -config USB - tristate - depends on ETRAX_USB_HOST - default y - config ETRAX_USB_HOST_PORT1 - bool " USB port 1 enabled" - depends on ETRAX_USB_HOST - default n + bool "USB port 1 enabled" + depends on ETRAX_USB_HOST + default n config ETRAX_USB_HOST_PORT2 - bool " USB port 2 enabled" - depends on ETRAX_USB_HOST - default n + bool "USB port 2 enabled" + depends on ETRAX_USB_HOST + default n config ETRAX_AXISFLASHMAP bool "Axis flash-map support" depends on ETRAX_ARCH_V10 + select MTD + select MTD_CFI + select MTD_CFI_AMDSTD + select MTD_OBSOLETE_CHIPS + select MTD_AMDSTD + select MTD_CHAR + select MTD_BLOCK + select MTD_PARTITIONS + select MTD_CONCAT + select MTD_COMPLEX_MAPPINGS help This option enables MTD mapping of flash devices. Needed to use flash memories. If unsure, say Y. @@ -627,119 +626,6 @@ config ETRAX_PTABLE_SECTOR for changing this is when the flash block size is bigger than 64kB (e.g. when using two parallel 16 bit flashes). -# here we define the CONFIG_'s necessary to enable MTD support -# for the flash -config MTD - tristate - depends on ETRAX_AXISFLASHMAP - default y - help - Memory Technology Devices are flash, RAM and similar chips, often - used for solid state file systems on embedded devices. This option - will provide the generic support for MTD drivers to register - themselves with the kernel and for potential users of MTD devices - to enumerate the devices which are present and obtain a handle on - them. It will also allow you to select individual drivers for - particular hardware and users of MTD devices. If unsure, say N. - -config MTD_CFI - tristate - depends on ETRAX_AXISFLASHMAP - default y - help - The Common Flash Interface specification was developed by Intel, - AMD and other flash manufactures that provides a universal method - for probing the capabilities of flash devices. If you wish to - support any device that is CFI-compliant, you need to enable this - option. Visit <http://www.amd.com/products/nvd/overview/cfi.html> - for more information on CFI. - -config MTD_CFI_AMDSTD - tristate - depends on ETRAX_AXISFLASHMAP - default y - help - The Common Flash Interface defines a number of different command - sets which a CFI-compliant chip may claim to implement. This code - provides support for one of those command sets, used on chips - chips including the AMD Am29LV320. - -config MTD_OBSOLETE_CHIPS - bool - depends on ETRAX_AXISFLASHMAP - default y - help - This option does not enable any code directly, but will allow you to - select some other chip drivers which are now considered obsolete, - because the generic CONFIG_JEDEC_PROBE code above should now detect - the chips which are supported by these drivers, and allow the generic - CFI-compatible drivers to drive the chips. Say 'N' here unless you have - already tried the CONFIG_JEDEC_PROBE method and reported its failure - to the MTD mailing list at <linux-mtd@lists.infradead.org> - -config MTD_AMDSTD - tristate - depends on ETRAX_AXISFLASHMAP - default y - help - This option enables support for flash chips using AMD-compatible - commands, including some which are not CFI-compatible and hence - cannot be used with the CONFIG_MTD_CFI_AMDSTD option. - - It also works on AMD compatible chips that do conform to CFI. - -config MTD_CHAR - tristate - depends on ETRAX_AXISFLASHMAP - default y - help - This provides a character device for each MTD device present in - the system, allowing the user to read and write directly to the - memory chips, and also use ioctl() to obtain information about - the device, or to erase parts of it. - -config MTD_BLOCK - tristate - depends on ETRAX_AXISFLASHMAP - default y - ---help--- - Although most flash chips have an erase size too large to be useful - as block devices, it is possible to use MTD devices which are based - on RAM chips in this manner. This block device is a user of MTD - devices performing that function. - - At the moment, it is also required for the Journalling Flash File - System(s) to obtain a handle on the MTD device when it's mounted - (although JFFS and JFFS2 don't actually use any of the functionality - of the mtdblock device). - - Later, it may be extended to perform read/erase/modify/write cycles - on flash chips to emulate a smaller block size. Needless to say, - this is very unsafe, but could be useful for file systems which are - almost never written to. - - You do not need this option for use with the DiskOnChip devices. For - those, enable NFTL support (CONFIG_NFTL) instead. - -config MTD_PARTITIONS - tristate - depends on ETRAX_AXISFLASHMAP - default y - help - If you have a device which needs to divide its flash chip(s) up - into multiple 'partitions', each of which appears to the user as - a separate MTD device, you require this option to be enabled. If - unsure, say 'Y'. - - Note, however, that you don't need this option for the DiskOnChip - devices. Partitioning on NFTL 'devices' is a different - that's the - 'normal' form of partitioning used on a block device. - -config MTD_CONCAT - tristate - depends on ETRAX_AXISFLASHMAP - default y - config ETRAX_I2C bool "I2C support" depends on ETRAX_ARCH_V10 @@ -752,7 +638,7 @@ config ETRAX_I2C val = ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_READREG), i2c_arg); # this is true for most products since PB-I2C seems to be somewhat -# flawed.. +# flawed.. config ETRAX_I2C_USES_PB_NOT_PB_I2C bool "I2C uses PB not PB-I2C" depends on ETRAX_I2C @@ -886,7 +772,7 @@ config ETRAX_RTC bool "Real Time Clock support" depends on ETRAX_ARCH_V10 help - Enables drivers for the Real-Time Clock battery-backed chips on + Enables drivers for the Real-Time Clock battery-backed chips on some products. The kernel reads the time when booting, and the date can be set using ioctl(fd, RTC_SET_TIME, &rt) with rt a rtc_time struct (see <file:include/asm-cris/rtc.h>) on the /dev/rtc @@ -903,13 +789,13 @@ config ETRAX_DS1302 bool "DS1302" help Enables the driver for the DS1302 Real-Time Clock battery-backed - chip on some products. + chip on some products. config ETRAX_PCF8563 bool "PCF8563" help Enables the driver for the PCF8563 Real-Time Clock battery-backed - chip on some products. + chip on some products. endchoice @@ -954,10 +840,8 @@ config ETRAX_DS1302_TRICKLE_CHARGE help This controls the initial value of the trickle charge register. 0 = disabled (use this if you are unsure or have a non rechargable battery) - Otherwise the following values can be OR:ed together to control the + Otherwise the following values can be OR:ed together to control the charge current: 1 = 2kohm, 2 = 4kohm, 3 = 4kohm 4 = 1 diode, 8 = 2 diodes Allowed values are (increasing current): 0, 11, 10, 9, 7, 6, 5 - - diff --git a/arch/cris/defconfig b/arch/cris/defconfig index 32c9c98..142a108 100644 --- a/arch/cris/defconfig +++ b/arch/cris/defconfig @@ -1,22 +1,27 @@ # # Automatically generated make config: don't edit +# Linux kernel version: 2.6.11 +# Mon Jun 20 13:42:02 2005 # CONFIG_MMU=y CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_IOMAP=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_CRIS=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y -CONFIG_STANDALONE=y CONFIG_BROKEN_ON_SMP=y # # General setup # -CONFIG_SWAP=y +CONFIG_LOCALVERSION="" +# CONFIG_SWAP is not set # CONFIG_SYSVIPC is not set # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set @@ -24,16 +29,19 @@ CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_HOTPLUG is not set +CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_EMBEDDED=y # CONFIG_KALLSYMS is not set CONFIG_FUTEX=y CONFIG_EPOLL=y -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set # # Loadable module support @@ -45,23 +53,28 @@ CONFIG_IOSCHED_CFQ=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +CONFIG_GENERIC_HARDIRQS=y +# CONFIG_SMP is not set CONFIG_ETRAX_CMDLINE="root=/dev/mtdblock3 init=/linuxrc" -CONFIG_ETRAX_WATCHDOG=y -CONFIG_ETRAX_WATCHDOG_NICE_DOGGY=y +# CONFIG_ETRAX_WATCHDOG is not set CONFIG_ETRAX_FAST_TIMER=y # CONFIG_PREEMPT is not set +# CONFIG_OOM_REBOOT is not set # # Hardware setup # -CONFIG_ETRAX100LX=y -# CONFIG_ETRAX100LX_V2 is not set +# CONFIG_ETRAX100LX is not set +CONFIG_ETRAX100LX_V2=y # CONFIG_SVINTO_SIM is not set +# CONFIG_ETRAXFS is not set +# CONFIG_ETRAXFS_SIM is not set CONFIG_ETRAX_ARCH_V10=y -CONFIG_ETRAX_DRAM_SIZE=16 +# CONFIG_ETRAX_ARCH_V32 is not set +CONFIG_ETRAX_DRAM_SIZE=32 CONFIG_ETRAX_FLASH_BUSWIDTH=2 -CONFIG_CRIS_LOW_MAP=y -CONFIG_ETRAX_DRAM_VIRTUAL_BASE=60000000 +CONFIG_ETRAX_FLASH1_SIZE=4 +CONFIG_ETRAX_DRAM_VIRTUAL_BASE=c0000000 CONFIG_ETRAX_PA_LEDS=y # CONFIG_ETRAX_PB_LEDS is not set # CONFIG_ETRAX_CSP0_LEDS is not set @@ -81,13 +94,13 @@ CONFIG_ETRAX_RESCUE_SER0=y # CONFIG_ETRAX_RESCUE_SER1 is not set # CONFIG_ETRAX_RESCUE_SER2 is not set # CONFIG_ETRAX_RESCUE_SER3 is not set -CONFIG_ETRAX_DEF_R_WAITSTATES=0x95f8 -CONFIG_ETRAX_DEF_R_BUS_CONFIG=0x104 +CONFIG_ETRAX_DEF_R_WAITSTATES=0x95a6 +CONFIG_ETRAX_DEF_R_BUS_CONFIG=0x4 CONFIG_ETRAX_SDRAM=y -CONFIG_ETRAX_DEF_R_SDRAM_CONFIG=0x00e03636 +CONFIG_ETRAX_DEF_R_SDRAM_CONFIG=0x09e05757 CONFIG_ETRAX_DEF_R_SDRAM_TIMING=0x80008002 CONFIG_ETRAX_DEF_R_PORT_PA_DIR=0x1d -CONFIG_ETRAX_DEF_R_PORT_PA_DATA=0xf0 +CONFIG_ETRAX_DEF_R_PORT_PA_DATA=0x00 CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG=0x00 CONFIG_ETRAX_DEF_R_PORT_PB_DIR=0x1e CONFIG_ETRAX_DEF_R_PORT_PB_DATA=0xf3 @@ -97,16 +110,17 @@ CONFIG_ETRAX_DEF_R_PORT_PB_DATA=0xf3 # Drivers for built-in interfaces # CONFIG_ETRAX_ETHERNET=y -CONFIG_NET_ETHERNET=y # CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK is not set CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY=y CONFIG_ETRAX_SERIAL=y -CONFIG_ETRAX_SERIAL_FAST_TIMER=y +# CONFIG_ETRAX_SERIAL_FAST_TIMER is not set +# CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST is not set +CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS=5 CONFIG_ETRAX_SERIAL_PORT0=y -# CONFIG_CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_OUT is not set -CONFIG_CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT=y -# CONFIG_CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_IN is not set -CONFIG_CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN=y +# CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_OUT is not set +CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT=y +# CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_IN is not set +CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN=y CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_NONE=y # CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_PA is not set # CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_PB is not set @@ -121,10 +135,10 @@ CONFIG_ETRAX_SER0_DSR_ON_PB_BIT=-1 CONFIG_ETRAX_SER0_CD_ON_PB_BIT=-1 # CONFIG_ETRAX_SERIAL_PORT1 is not set CONFIG_ETRAX_SERIAL_PORT2=y -# CONFIG_CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_OUT is not set -CONFIG_CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT=y -# CONFIG_CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_IN is not set -CONFIG_CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN=y +# CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_OUT is not set +CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT=y +# CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_IN is not set +CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN=y CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_NONE=y # CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_PA is not set # CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_PB is not set @@ -138,44 +152,51 @@ CONFIG_ETRAX_SER2_RI_ON_PB_BIT=-1 CONFIG_ETRAX_SER2_DSR_ON_PB_BIT=-1 CONFIG_ETRAX_SER2_CD_ON_PB_BIT=-1 # CONFIG_ETRAX_SERIAL_PORT3 is not set -# CONFIG_ETRAX_RS485 is not set -# CONFIG_ETRAX_IDE is not set -# CONFIG_IDE is not set -# CONFIG_ETRAX_USB_HOST is not set +CONFIG_ETRAX_RS485=y +# CONFIG_ETRAX_RS485_ON_PA is not set +# CONFIG_ETRAX_RS485_DISABLE_RECEIVER is not set +CONFIG_ETRAX_IDE=y +CONFIG_ETRAX_IDE_DELAY=15 +CONFIG_ETRAX_IDE_PB7_RESET=y +# CONFIG_ETRAX_IDE_G27_RESET is not set +CONFIG_ETRAX_USB_HOST=y +CONFIG_ETRAX_USB_HOST_PORT1=y +CONFIG_ETRAX_USB_HOST_PORT2=y CONFIG_ETRAX_AXISFLASHMAP=y CONFIG_ETRAX_PTABLE_SECTOR=65536 -CONFIG_MTD=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_OBSOLETE_CHIPS=y -CONFIG_MTD_AMDSTD=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CONCAT=y # CONFIG_ETRAX_I2C is not set -CONFIG_ETRAX_GPIO=y -CONFIG_ETRAX_PA_BUTTON_BITMASK=0x02 -CONFIG_ETRAX_PA_CHANGEABLE_DIR=0x00 -CONFIG_ETRAX_PA_CHANGEABLE_BITS=0xFF -CONFIG_ETRAX_PB_CHANGEABLE_DIR=0x00 -CONFIG_ETRAX_PB_CHANGEABLE_BITS=0xFF -# CONFIG_ETRAX_RTC is not set +# CONFIG_ETRAX_GPIO is not set +CONFIG_ETRAX_RTC=y +CONFIG_ETRAX_DS1302=y +# CONFIG_ETRAX_PCF8563 is not set +CONFIG_ETRAX_DS1302_RST_ON_GENERIC_PORT=y +CONFIG_ETRAX_DS1302_RSTBIT=0 +CONFIG_ETRAX_DS1302_SCLBIT=1 +CONFIG_ETRAX_DS1302_SDABIT=0 +CONFIG_ETRAX_DS1302_TRICKLE_CHARGE=0 # # Generic Driver Options # +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set # # Memory Technology Devices (MTD) # +CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_CONCAT=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # # User Modules And Translation Layers # +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set @@ -183,14 +204,30 @@ CONFIG_ETRAX_PB_CHANGEABLE_BITS=0xFF # # RAM/ROM/Flash chip drivers # +CONFIG_MTD_CFI=y # CONFIG_MTD_JEDECPROBE is not set CONFIG_MTD_GEN_PROBE=y # CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set # CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_AMDSTD_RETRY=0 # CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_RAM=y # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set +CONFIG_MTD_OBSOLETE_CHIPS=y +CONFIG_MTD_AMDSTD=y # CONFIG_MTD_SHARP is not set # CONFIG_MTD_JEDEC is not set @@ -204,11 +241,13 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y # Self-contained MTD device drivers # # CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set CONFIG_MTD_MTDRAM=y CONFIG_MTDRAM_TOTAL_SIZE=0 CONFIG_MTDRAM_ERASE_SIZE=64 CONFIG_MTDRAM_ABS_POS=0x0 # CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set # # Disk-On-Chip Device Drivers @@ -235,11 +274,25 @@ CONFIG_MTDRAM_ABS_POS=0x0 # Block devices # # CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_INITRD is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set # # Multi-device support (RAID and LVM) @@ -249,6 +302,28 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # # ATA/ATAPI/MFM/RLL support # +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECD=y +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +# CONFIG_IDE_GENERIC is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -258,7 +333,6 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # # IEEE 1394 (FireWire) support # -# CONFIG_IEEE1394 is not set # # I2O device support @@ -288,6 +362,9 @@ CONFIG_INET=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set # # IP: Virtual Server Configuration @@ -301,11 +378,10 @@ CONFIG_NETFILTER=y # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set +# CONFIG_IP_NF_CONNTRACK_MARK is not set # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set -# CONFIG_IP_NF_COMPAT_IPCHAINS is not set -# CONFIG_IP_NF_COMPAT_IPFWADM is not set # # SCTP Configuration (EXPERIMENTAL) @@ -323,12 +399,12 @@ CONFIG_NETFILTER=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set -# CONFIG_NET_HW_FLOWCONTROL is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set # # Network testing @@ -338,7 +414,26 @@ CONFIG_NETFILTER=y # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set -# CONFIG_BT is not set +CONFIG_BT=y +CONFIG_BT_L2CAP=y +# CONFIG_BT_SCO is not set +CONFIG_BT_RFCOMM=y +# CONFIG_BT_RFCOMM_TTY is not set +CONFIG_BT_BNEP=y +# CONFIG_BT_BNEP_MC_FILTER is not set +# CONFIG_BT_BNEP_PROTO_FILTER is not set +# CONFIG_BT_HIDP is not set + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIUSB=y +# CONFIG_BT_HCIUSB_SCO is not set +# CONFIG_BT_HCIUART is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set @@ -348,6 +443,7 @@ CONFIG_NETDEVICES=y # # Ethernet (10 or 100Mbit) # +CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # @@ -389,11 +485,19 @@ CONFIG_NETDEVICES=y # # Input device support # -# CONFIG_INPUT is not set +CONFIG_INPUT=y # # Userland interfaces # +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set # # Input I/O drivers @@ -404,10 +508,25 @@ CONFIG_SERIO=y # CONFIG_SERIO_I8042 is not set # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_CT82C710 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set # # Input Device Drivers # +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set # # Character devices @@ -426,7 +545,6 @@ CONFIG_SERIO=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_QIC02_TAPE is not set # # IPMI @@ -441,13 +559,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set # # Ftape, the floppy tape device driver # -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set @@ -469,10 +584,15 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_JBD is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set + +# +# XFS support +# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -485,7 +605,8 @@ CONFIG_LEGACY_PTY_COUNT=256 # # DOS/FAT/NT Filesystems # -# CONFIG_FAT_FS is not set +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set # CONFIG_NTFS_FS is not set # @@ -497,6 +618,7 @@ CONFIG_SYSFS=y # CONFIG_DEVFS_FS is not set # CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y +# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y @@ -512,7 +634,15 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set CONFIG_JFFS_FS=y CONFIG_JFFS_FS_VERBOSE=0 -# CONFIG_JFFS2_FS is not set +# CONFIG_JFFS_PROC_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +# CONFIG_JFFS2_FS_NAND is not set +# CONFIG_JFFS2_FS_NOR_ECC is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set @@ -530,14 +660,13 @@ CONFIG_NFS_V3=y # CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y -# CONFIG_EXPORTFS is not set CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set # CONFIG_AFS_FS is not set # @@ -557,8 +686,120 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SOUND is not set # +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PC-card bridges +# + +# # USB support # +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# + +# +# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_STORAGE is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +CONFIG_USB_RTL8150=y +# CONFIG_USB_USBNET is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_TEST is not set + +# +# USB ATM/DSL drivers +# # # USB Gadget Support @@ -568,14 +809,17 @@ CONFIG_MSDOS_PARTITION=y # # Kernel hacking # -# CONFIG_PROFILE is not set +# CONFIG_PROFILING is not set +# CONFIG_SYSTEM_PROFILER is not set # CONFIG_ETRAX_KGDB is not set # CONFIG_DEBUG_INFO is not set # CONFIG_FRAME_POINTER is not set +# CONFIG_DEBUG_NMI_OOPS is not set # # Security options # +# CONFIG_KEYS is not set # CONFIG_SECURITY is not set # @@ -584,8 +828,14 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_CRYPTO is not set # +# Hardware crypto devices +# + +# # Library routines # -# CONFIG_CRC32 is not set +# CONFIG_CRC_CCITT is not set +CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y diff --git a/arch/cris/kernel/Makefile b/arch/cris/kernel/Makefile index 1546a0e..c8e8ea5 100644 --- a/arch/cris/kernel/Makefile +++ b/arch/cris/kernel/Makefile @@ -1,4 +1,4 @@ -# $Id: Makefile,v 1.10 2004/05/14 10:18:12 starvik Exp $ +# $Id: Makefile,v 1.12 2004/10/19 13:07:43 starvik Exp $ # # Makefile for the linux kernel. # @@ -10,6 +10,7 @@ obj-y := process.o traps.o irq.o ptrace.o setup.o \ obj-$(CONFIG_MODULES) += crisksyms.o obj-$(CONFIG_MODULES) += module.o +obj-$(CONFIG_SYSTEM_PROFILER) += profile.o clean: |