ioat2,3: put channel hardware in known state at init

Put the ioat2 and ioat3 state machines in the halted state with all
errors cleared.

The ioat1 init path is not disturbed for stability, there are no
reported ioat1 initiaization issues.

Cc: <stable@kernel.org>
Reported-by: Roland Dreier <rdreier@cisco.com>
Tested-by: Roland Dreier <rdreier@cisco.com>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

1 files changed, 40 insertions, 14 deletions

diff --git a/drivers/dma/ioat/dma_v3.c b/drivers/dma/ioat/dma_v3.c
index e58ecb2..9908c9e 100644
--- a/drivers/dma/ioat/dma_v3.c
+++ b/drivers/dma/ioat/dma_v3.c
@@ -1130,6 +1130,45 @@ static int __devinit ioat3_dma_self_test(struct ioatdma_device *device)
 	return 0;
 }
 
+static int ioat3_reset_hw(struct ioat_chan_common *chan)
+{
+	/* throw away whatever the channel was doing and get it
+	 * initialized, with ioat3 specific workarounds
+	 */
+	struct ioatdma_device *device = chan->device;
+	struct pci_dev *pdev = device->pdev;
+	u32 chanerr;
+	u16 dev_id;
+	int err;
+
+	ioat2_quiesce(chan, msecs_to_jiffies(100));
+
+	chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET);
+	writel(chanerr, chan->reg_base + IOAT_CHANERR_OFFSET);
+
+	/* -= IOAT ver.3 workarounds =- */
+	/* Write CHANERRMSK_INT with 3E07h to mask out the errors
+	 * that can cause stability issues for IOAT ver.3, and clear any
+	 * pending errors
+	 */
+	pci_write_config_dword(pdev, IOAT_PCI_CHANERRMASK_INT_OFFSET, 0x3e07);
+	err = pci_read_config_dword(pdev, IOAT_PCI_CHANERR_INT_OFFSET, &chanerr);
+	if (err) {
+		dev_err(&pdev->dev, "channel error register unreachable\n");
+		return err;
+	}
+	pci_write_config_dword(pdev, IOAT_PCI_CHANERR_INT_OFFSET, chanerr);
+
+	/* Clear DMAUNCERRSTS Cfg-Reg Parity Error status bit
+	 * (workaround for spurious config parity error after restart)
+	 */
+	pci_read_config_word(pdev, IOAT_PCI_DEVICE_ID_OFFSET, &dev_id);
+	if (dev_id == PCI_DEVICE_ID_INTEL_IOAT_TBG0)
+		pci_write_config_dword(pdev, IOAT_PCI_DMAUNCERRSTS_OFFSET, 0x10);
+
+	return ioat2_reset_sync(chan, msecs_to_jiffies(200));
+}
+
 int __devinit ioat3_dma_probe(struct ioatdma_device *device, int dca)
 {
 	struct pci_dev *pdev = device->pdev;
@@ -1139,10 +1178,10 @@ int __devinit ioat3_dma_probe(struct ioatdma_device *device, int dca)
 	struct ioat_chan_common *chan;
 	bool is_raid_device = false;
 	int err;
-	u16 dev_id;
 	u32 cap;
 
 	device->enumerate_channels = ioat2_enumerate_channels;
+	device->reset_hw = ioat3_reset_hw;
 	device->self_test = ioat3_dma_self_test;
 	dma = &device->common;
 	dma->device_prep_dma_memcpy = ioat2_dma_prep_memcpy_lock;
@@ -1218,19 +1257,6 @@ int __devinit ioat3_dma_probe(struct ioatdma_device *device, int dca)
 	dma->device_prep_dma_xor_val = NULL;
 	#endif
 
-	/* -= IOAT ver.3 workarounds =- */
-	/* Write CHANERRMSK_INT with 3E07h to mask out the errors
-	 * that can cause stability issues for IOAT ver.3
-	 */
-	pci_write_config_dword(pdev, IOAT_PCI_CHANERRMASK_INT_OFFSET, 0x3e07);
-
-	/* Clear DMAUNCERRSTS Cfg-Reg Parity Error status bit
-	 * (workaround for spurious config parity error after restart)
-	 */
-	pci_read_config_word(pdev, IOAT_PCI_DEVICE_ID_OFFSET, &dev_id);
-	if (dev_id == PCI_DEVICE_ID_INTEL_IOAT_TBG0)
-		pci_write_config_dword(pdev, IOAT_PCI_DMAUNCERRSTS_OFFSET, 0x10);
-
 	err = ioat_probe(device);
 	if (err)
 		return err;