[PATCH] I2C: Move hwmon drivers (1/3)

Part 1: Configuration files and Makefiles.

From: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

2 files changed, 3 insertions, 437 deletions

diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index fddfc11..43f70db 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -1,410 +1,12 @@
 #
-# I2C Sensor and "other" chip configuration
+# Miscellaneous I2C chip drivers configuration
 #
 
-menu "Hardware Sensors Chip support"
-	depends on I2C
-
 config I2C_SENSOR
 	tristate
 	default n
 
-config SENSORS_ADM1021
-	tristate "Analog Devices ADM1021 and compatibles"
-	depends on I2C
-	select I2C_SENSOR
-	help
-	  If you say yes here you get support for Analog Devices ADM1021 
-	  and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
-	  Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
-	  and the XEON processor built-in sensor.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called adm1021.
-
-config SENSORS_ADM1025
-	tristate "Analog Devices ADM1025 and compatibles"
-	depends on I2C && EXPERIMENTAL
-	select I2C_SENSOR
-	help
-	  If you say yes here you get support for Analog Devices ADM1025
-	  and Philips NE1619 sensor chips.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called adm1025.
-
-config SENSORS_ADM1026
-	tristate "Analog Devices ADM1026 and compatibles"
-	depends on I2C && EXPERIMENTAL
-	select I2C_SENSOR
-	help
-	  If you say yes here you get support for Analog Devices ADM1026
-	  sensor chip.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called adm1026.
-
-config SENSORS_ADM1031
-	tristate "Analog Devices ADM1031 and compatibles"
-	depends on I2C && EXPERIMENTAL
-	select I2C_SENSOR
-	help
-	  If you say yes here you get support for Analog Devices ADM1031 
-	  and ADM1030 sensor chips.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called adm1031.
-
-config SENSORS_ADM9240
-	tristate "Analog Devices ADM9240 and compatibles"
-	depends on I2C && EXPERIMENTAL
-	select I2C_SENSOR
-	help
-	  If you say yes here you get support for Analog Devices ADM9240,
-	  Dallas DS1780, National Semiconductor LM81 sensor chips.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called adm9240.
-
-config SENSORS_ASB100
-	tristate "Asus ASB100 Bach"
-	depends on I2C && EXPERIMENTAL
-	select I2C_SENSOR
-	help
-	  If you say yes here you get support for the ASB100 Bach sensor
-	  chip found on some Asus mainboards.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called asb100.
-
-config SENSORS_ATXP1
-	tristate "Attansic ATXP1 VID controller"
-	depends on I2C && EXPERIMENTAL
-	select I2C_SENSOR
-	help
-	  If you say yes here you get support for the Attansic ATXP1 VID
-	  controller.
-
-	  If your board have such a chip, you are able to control your CPU
-	  core and other voltages.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called atxp1.
-
-config SENSORS_DS1621
-	tristate "Dallas Semiconductor DS1621 and DS1625"
-	depends on I2C && EXPERIMENTAL
-	select I2C_SENSOR
-	help
-	  If you say yes here you get support for Dallas Semiconductor
-	  DS1621 and DS1625 sensor chips. 
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called ds1621.
-
-config SENSORS_FSCHER
-	tristate "FSC Hermes"
-	depends on I2C && EXPERIMENTAL
-	select I2C_SENSOR
-	help
-	  If you say yes here you get support for Fujitsu Siemens
-	  Computers Hermes sensor chips.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called fscher.
-
-config SENSORS_FSCPOS
-	tristate "FSC Poseidon"
-	depends on I2C && EXPERIMENTAL
-	select I2C_SENSOR
-	help
-	  If you say yes here you get support for Fujitsu Siemens
-	  Computers Poseidon sensor chips.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called fscpos.
-
-config SENSORS_GL518SM
-	tristate "Genesys Logic GL518SM"
-	depends on I2C
-	select I2C_SENSOR
-	help
-	  If you say yes here you get support for Genesys Logic GL518SM
-	  sensor chips.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called gl518sm.
-
-config SENSORS_GL520SM
-	tristate "Genesys Logic GL520SM"
-	depends on I2C && EXPERIMENTAL
-	select I2C_SENSOR
-	help
-	  If you say yes here you get support for Genesys Logic GL520SM
-	  sensor chips.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called gl520sm.
-
-config SENSORS_IT87
-	tristate "ITE IT87xx and compatibles"
-	depends on I2C
-	select I2C_SENSOR
-	help
-	  If you say yes here you get support for ITE IT87xx sensor chips
-	  and clones: SiS960.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called it87.
-
-config SENSORS_LM63
-	tristate "National Semiconductor LM63"
-	depends on I2C && EXPERIMENTAL
-	select I2C_SENSOR
-	help
-	  If you say yes here you get support for the National Semiconductor
-	  LM63 remote diode digital temperature sensor with integrated fan
-	  control.  Such chips are found on the Tyan S4882 (Thunder K8QS Pro)
-	  motherboard, among others.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called lm63.
-
-config SENSORS_LM75
-	tristate "National Semiconductor LM75 and compatibles"
-	depends on I2C
-	select I2C_SENSOR
-	help
-	  If you say yes here you get support for National Semiconductor LM75
-	  sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
-	  9-bit precision mode), and TelCom (now Microchip) TCN75.
-
-	  The DS75 and DS1775 in 10- to 12-bit precision modes will require
-	  a force module parameter. The driver will not handle the extra
-	  precision anyhow.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called lm75.
-
-config SENSORS_LM77
-	tristate "National Semiconductor LM77"
-	depends on I2C && EXPERIMENTAL
-	select I2C_SENSOR
-	help
-	  If you say yes here you get support for National Semiconductor LM77
-	  sensor chips.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called lm77.
-
-config SENSORS_LM78
-	tristate "National Semiconductor LM78 and compatibles"
-	depends on I2C && EXPERIMENTAL
-	select I2C_SENSOR
-	help
-	  If you say yes here you get support for National Semiconductor LM78,
-	  LM78-J and LM79.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called lm78.
-
-config SENSORS_LM80
-	tristate "National Semiconductor LM80"
-	depends on I2C && EXPERIMENTAL
-	select I2C_SENSOR
-	help
-	  If you say yes here you get support for National Semiconductor
-	  LM80 sensor chips.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called lm80.
-
-config SENSORS_LM83
-	tristate "National Semiconductor LM83"
-	depends on I2C
-	select I2C_SENSOR
-	help
-	  If you say yes here you get support for National Semiconductor
-	  LM83 sensor chips.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called lm83.
-
-config SENSORS_LM85
-	tristate "National Semiconductor LM85 and compatibles"
-	depends on I2C && EXPERIMENTAL
-	select I2C_SENSOR
-	help
-	  If you say yes here you get support for National Semiconductor LM85
-	  sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called lm85.
-
-config SENSORS_LM87
-	tristate "National Semiconductor LM87"
-	depends on I2C && EXPERIMENTAL
-	select I2C_SENSOR
-	help
-	  If you say yes here you get support for National Semiconductor LM87
-	  sensor chips.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called lm87.
-
-config SENSORS_LM90
-	tristate "National Semiconductor LM90 and compatibles"
-	depends on I2C
-	select I2C_SENSOR
-	help
-	  If you say yes here you get support for National Semiconductor LM90,
-	  LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and
-	  MAX6658 sensor chips.
-
-	  The Analog Devices ADT7461 sensor chip is also supported, but only
-	  if found in ADM1032 compatibility mode.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called lm90.
-
-config SENSORS_LM92
-	tristate "National Semiconductor LM92 and compatibles"
-	depends on I2C && EXPERIMENTAL
-	select I2C_SENSOR
-	help
-	  If you say yes here you get support for National Semiconductor LM92
-	  and Maxim MAX6635 sensor chips.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called lm92.
-
-config SENSORS_MAX1619
-	tristate "Maxim MAX1619 sensor chip"
-	depends on I2C && EXPERIMENTAL
-	select I2C_SENSOR
-	help
-	  If you say yes here you get support for MAX1619 sensor chip.
-	  
-	  This driver can also be built as a module.  If so, the module
-	  will be called max1619.
-
-config SENSORS_PC87360
-	tristate "National Semiconductor PC87360 family"
-	depends on I2C && EXPERIMENTAL
-	select I2C_SENSOR
-	select I2C_ISA
-	help
-	  If you say yes here you get access to the hardware monitoring
-	  functions of the National Semiconductor PC8736x Super-I/O chips.
-	  The PC87360, PC87363 and PC87364 only have fan monitoring and
-	  control.  The PC87365 and PC87366 additionally have voltage and
-	  temperature monitoring.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called pc87360.
-
-config SENSORS_SMSC47B397
-	tristate "SMSC LPC47B397-NC"
-	depends on I2C && EXPERIMENTAL
-	select I2C_SENSOR
-	select I2C_ISA
-	help
-	  If you say yes here you get support for the SMSC LPC47B397-NC
-	  sensor chip.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called smsc47b397.
-
-config SENSORS_SIS5595
-	tristate "Silicon Integrated Systems Corp. SiS5595"
-	depends on I2C && PCI && EXPERIMENTAL
-	select I2C_SENSOR
-	select I2C_ISA
-	help
-	  If you say yes here you get support for the integrated sensors in
-	  SiS5595 South Bridges.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called sis5595.
-
-config SENSORS_SMSC47M1
-	tristate "SMSC LPC47M10x and compatibles"
-	depends on I2C && EXPERIMENTAL
-	select I2C_SENSOR
-	select I2C_ISA
-	help
-	  If you say yes here you get support for the integrated fan
-	  monitoring and control capabilities of the SMSC LPC47B27x,
-	  LPC47M10x, LPC47M13x, LPC47M14x, LPC47M15x and LPC47M192 chips.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called smsc47m1.
-
-config SENSORS_VIA686A
-	tristate "VIA686A"
-	depends on I2C && PCI
-	select I2C_SENSOR
-	select I2C_ISA
-	help
-	  If you say yes here you get support for the integrated sensors in
-	  Via 686A/B South Bridges.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called via686a.
-
-config SENSORS_W83781D
-	tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
-	depends on I2C
-	select I2C_SENSOR
-	help
-	  If you say yes here you get support for the Winbond W8378x series
-	  of sensor chips: the W83781D, W83782D, W83783S and W83627HF,
-	  and the similar Asus AS99127F.
-	  
-	  This driver can also be built as a module.  If so, the module
-	  will be called w83781d.
-
-config SENSORS_W83L785TS
-	tristate "Winbond W83L785TS-S"
-	depends on I2C && EXPERIMENTAL
-	select I2C_SENSOR
-	help
-	  If you say yes here you get support for the Winbond W83L785TS-S
-	  sensor chip, which is used on the Asus A7N8X, among other
-	  motherboards.
-	  
-	  This driver can also be built as a module.  If so, the module
-	  will be called w83l785ts.
-
-config SENSORS_W83627HF
-	tristate "Winbond W83627HF, W83627THF, W83637HF, W83697HF"
-	depends on I2C && EXPERIMENTAL
-	select I2C_SENSOR
-	select I2C_ISA
-	help
-	  If you say yes here you get support for the Winbond W836X7 series
-	  of sensor chips: the W83627HF, W83627THF, W83637HF, and the W83697HF
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called w83627hf.
-
-config SENSORS_W83627EHF
-	tristate "Winbond W83627EHF"
-	depends on I2C && EXPERIMENTAL
-	select I2C_SENSOR
-	select I2C_ISA
-	help
-	  If you say yes here you get preliminary support for the hardware
-	  monitoring functionality of the Winbond W83627EHF Super-I/O chip.
-	  Only fan and temperature inputs are supported at the moment, while
-	  the chip does much more than that.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called w83627ehf.
-
-endmenu
-
-menu "Other I2C Chip support"
+menu "Miscellaneous I2C Chip support"
 	depends on I2C
 
 config SENSORS_DS1337
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index b5e6d2f..a876dd4 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -1,52 +1,16 @@
 #
-# Makefile for sensor and "other" I2C chip drivers.
+# Makefile for miscellaneous I2C chip drivers.
 #
 
-# asb100, then w83781d go first, as they can override other drivers' addresses.
-obj-$(CONFIG_SENSORS_ASB100)	+= asb100.o
-obj-$(CONFIG_SENSORS_W83627HF)	+= w83627hf.o
-obj-$(CONFIG_SENSORS_W83781D)	+= w83781d.o
-
-obj-$(CONFIG_SENSORS_ADM1021)	+= adm1021.o
-obj-$(CONFIG_SENSORS_ADM1025)	+= adm1025.o
-obj-$(CONFIG_SENSORS_ADM1026)	+= adm1026.o
-obj-$(CONFIG_SENSORS_ADM1031)	+= adm1031.o
-obj-$(CONFIG_SENSORS_ADM9240)	+= adm9240.o
-obj-$(CONFIG_SENSORS_ATXP1)	+= atxp1.o
 obj-$(CONFIG_SENSORS_DS1337)	+= ds1337.o
 obj-$(CONFIG_SENSORS_DS1374)	+= ds1374.o
-obj-$(CONFIG_SENSORS_DS1621)	+= ds1621.o
 obj-$(CONFIG_SENSORS_EEPROM)	+= eeprom.o
-obj-$(CONFIG_SENSORS_FSCHER)	+= fscher.o
-obj-$(CONFIG_SENSORS_FSCPOS)	+= fscpos.o
-obj-$(CONFIG_SENSORS_GL518SM)	+= gl518sm.o
-obj-$(CONFIG_SENSORS_GL520SM)	+= gl520sm.o
-obj-$(CONFIG_SENSORS_IT87)	+= it87.o
-obj-$(CONFIG_SENSORS_LM63)	+= lm63.o
-obj-$(CONFIG_SENSORS_LM75)	+= lm75.o
-obj-$(CONFIG_SENSORS_LM77)	+= lm77.o
-obj-$(CONFIG_SENSORS_LM78)	+= lm78.o
-obj-$(CONFIG_SENSORS_LM80)	+= lm80.o
-obj-$(CONFIG_SENSORS_LM83)	+= lm83.o
-obj-$(CONFIG_SENSORS_LM85)	+= lm85.o
-obj-$(CONFIG_SENSORS_LM87)	+= lm87.o
-obj-$(CONFIG_SENSORS_LM90)	+= lm90.o
-obj-$(CONFIG_SENSORS_LM92)	+= lm92.o
-obj-$(CONFIG_SENSORS_MAX1619)	+= max1619.o
 obj-$(CONFIG_SENSORS_MAX6875)	+= max6875.o
 obj-$(CONFIG_SENSORS_M41T00)	+= m41t00.o
-obj-$(CONFIG_SENSORS_PC87360)	+= pc87360.o
 obj-$(CONFIG_SENSORS_PCA9539)	+= pca9539.o
 obj-$(CONFIG_SENSORS_PCF8574)	+= pcf8574.o
 obj-$(CONFIG_SENSORS_PCF8591)	+= pcf8591.o
 obj-$(CONFIG_SENSORS_RTC8564)	+= rtc8564.o
-obj-$(CONFIG_SENSORS_SIS5595)	+= sis5595.o
-obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
-obj-$(CONFIG_SENSORS_SMSC47M1)	+= smsc47m1.o
-obj-$(CONFIG_SENSORS_VIA686A)	+= via686a.o
-obj-$(CONFIG_SENSORS_W83627EHF)	+= w83627ehf.o
-obj-$(CONFIG_SENSORS_W83L785TS)	+= w83l785ts.o
-
 obj-$(CONFIG_ISP1301_OMAP)	+= isp1301_omap.o
 obj-$(CONFIG_TPS65010)		+= tps65010.o