ide: make remaining built-in only IDE host drivers modular (take 2)

* Make remaining built-in only IDE host drivers modular, add ide-scan-pci.c
  file for probing PCI host drivers registered with IDE core (special case
  for built-in IDE and CONFIG_IDEPCI_PCIBUS_ORDER=y) and then take care of
  the ordering in which all IDE host drivers are probed when IDE is built-in
  during link time.

* Move probing of gayle, falconide, macide, q40ide and buddha (m68k arch
  specific) host drivers, before PCI ones (no PCI on m68k), ide-cris (cris
  arch specific), cmd640 (x86 arch specific) and pmac (ppc arch specific).

* Move probing of ide-cris (cris arch specific) host driver before cmd640
  (x86 arch specific).

* Move probing of mpc8xx (ppc specific) host driver before ide-pnp (depends
  on ISA and none of ppc platform that use mpc8xx supports ISA) and ide-h8300
  (h8300 arch specific).

* Add "probe_vlb" kernel parameter to cmd640 host driver and update
  Documentation/ide.txt accordingly.

* Make IDE_ARM config option visible so it can also be disabled if needed.

* Remove bogus comment from ide.c while at it.

v2:
* Fix two issues spotted by Sergei:
  - replace ENOMEM error value by ENOENT in ide-h8300 host driver
  - fix MODULE_PARM_DESC() in cmd640 host driver

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 34 insertions, 24 deletions

diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
index b181fc6..0d2da89 100644
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -7,41 +7,37 @@
 # Note : at this point, these files are compiled on all systems.
 # In the future, some of these should be built conditionally.
 #
-# First come modules that register themselves with the core
+# link order is important here
 
 EXTRA_CFLAGS				+= -Idrivers/ide
 
-obj-$(CONFIG_BLK_DEV_IDE)		+= pci/
-
 ide-core-y += ide.o ide-io.o ide-iops.o ide-lib.o ide-probe.o ide-taskfile.o
 
-ide-core-$(CONFIG_BLK_DEV_CMD640)	+= pci/cmd640.o
-
-# Core IDE code - must come before legacy
+# core IDE code
 ide-core-$(CONFIG_BLK_DEV_IDEPCI)	+= setup-pci.o
 ide-core-$(CONFIG_BLK_DEV_IDEDMA)	+= ide-dma.o
 ide-core-$(CONFIG_IDE_PROC_FS)		+= ide-proc.o
-ide-core-$(CONFIG_BLK_DEV_IDEPNP)	+= ide-pnp.o
 ide-core-$(CONFIG_BLK_DEV_IDEACPI)	+= ide-acpi.o
 
-# built-in only drivers from arm/
-ide-core-$(CONFIG_IDE_ARM)		+= arm/ide_arm.o
+obj-$(CONFIG_BLK_DEV_IDE)		+= ide-core.o
 
-# built-in only drivers from legacy/
-ide-core-$(CONFIG_BLK_DEV_BUDDHA)	+= legacy/buddha.o
-ide-core-$(CONFIG_BLK_DEV_FALCON_IDE)	+= legacy/falconide.o
-ide-core-$(CONFIG_BLK_DEV_GAYLE)	+= legacy/gayle.o
-ide-core-$(CONFIG_BLK_DEV_MAC_IDE)	+= legacy/macide.o
-ide-core-$(CONFIG_BLK_DEV_Q40IDE)	+= legacy/q40ide.o
+ifeq ($(CONFIG_IDE_ARM), y)
+	ide-arm-core-y += arm/ide_arm.o
+	obj-y += ide-arm-core.o
+endif
 
-# built-in only drivers from ppc/
-ide-core-$(CONFIG_BLK_DEV_MPC8xx_IDE)	+= ppc/mpc8xx.o
-ide-core-$(CONFIG_BLK_DEV_IDE_PMAC)	+= ppc/pmac.o
+obj-$(CONFIG_BLK_DEV_IDE)		+= legacy/ pci/
 
-# built-in only drivers from h8300/
-ide-core-$(CONFIG_IDE_H8300)		+= h8300/ide-h8300.o
+obj-$(CONFIG_IDEPCI_PCIBUS_ORDER)	+= ide-scan-pci.o
 
-obj-$(CONFIG_BLK_DEV_IDE)		+= ide-core.o
+ifeq ($(CONFIG_BLK_DEV_CMD640), y)
+	cmd640-core-y += pci/cmd640.o
+	obj-y += cmd640-core.o
+endif
+
+obj-$(CONFIG_BLK_DEV_IDE)		+= cris/ ppc/
+obj-$(CONFIG_BLK_DEV_IDEPNP)		+= ide-pnp.o
+obj-$(CONFIG_IDE_H8300)			+= h8300/
 obj-$(CONFIG_IDE_GENERIC)		+= ide-generic.o
 
 obj-$(CONFIG_BLK_DEV_IDEDISK)		+= ide-disk.o
@@ -49,6 +45,20 @@ obj-$(CONFIG_BLK_DEV_IDECD)		+= ide-cd.o
 obj-$(CONFIG_BLK_DEV_IDETAPE)		+= ide-tape.o
 obj-$(CONFIG_BLK_DEV_IDEFLOPPY)		+= ide-floppy.o
 
-obj-$(CONFIG_BLK_DEV_IDE)		+= legacy/ arm/ mips/
-obj-$(CONFIG_BLK_DEV_HD)		+= legacy/
-obj-$(CONFIG_ETRAX_IDE)		+= cris/
+ifeq ($(CONFIG_BLK_DEV_IDECS), y)
+	ide-cs-core-y += legacy/ide-cs.o
+	obj-y += ide-cs-core.o
+endif
+
+ifeq ($(CONFIG_BLK_DEV_PLATFORM), y)
+	ide-platform-core-y += legacy/ide_platform.o
+	obj-y += ide-platform-core.o
+endif
+
+obj-$(CONFIG_BLK_DEV_IDE)		+= arm/ mips/
+
+# old hd driver must be last
+ifeq ($(CONFIG_BLK_DEV_HD), y)
+	hd-core-y += legacy/hd.o
+	obj-y += hd-core.o
+endif