IB/ipath: add calls to new 7220 code and enable in build

This patch adds the initialization calls into the new 7220 HCA files,
changes the Makefile to compile and link the new files, and code to
handle send DMA.

Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

1 files changed, 132 insertions, 18 deletions

diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c
index c94bc47..ed7bdc9 100644
--- a/drivers/infiniband/hw/ipath/ipath_driver.c
+++ b/drivers/infiniband/hw/ipath/ipath_driver.c
@@ -129,8 +129,10 @@ static int __devinit ipath_init_one(struct pci_dev *,
 
 /* Only needed for registration, nothing else needs this info */
 #define PCI_VENDOR_ID_PATHSCALE 0x1fc1
+#define PCI_VENDOR_ID_QLOGIC 0x1077
 #define PCI_DEVICE_ID_INFINIPATH_HT 0xd
 #define PCI_DEVICE_ID_INFINIPATH_PE800 0x10
+#define PCI_DEVICE_ID_INFINIPATH_7220 0x7220
 
 /* Number of seconds before our card status check...  */
 #define STATUS_TIMEOUT 60
@@ -138,6 +140,7 @@ static int __devinit ipath_init_one(struct pci_dev *,
 static const struct pci_device_id ipath_pci_tbl[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE, PCI_DEVICE_ID_INFINIPATH_HT) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE, PCI_DEVICE_ID_INFINIPATH_PE800) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_INFINIPATH_7220) },
 	{ 0, }
 };
 
@@ -532,6 +535,13 @@ static int __devinit ipath_init_one(struct pci_dev *pdev,
 			      "CONFIG_PCI_MSI is not enabled\n", ent->device);
 		return -ENODEV;
 #endif
+	case PCI_DEVICE_ID_INFINIPATH_7220:
+#ifndef CONFIG_PCI_MSI
+		ipath_dbg("CONFIG_PCI_MSI is not enabled, "
+			  "using IntX for unit %u\n", dd->ipath_unit);
+#endif
+		ipath_init_iba7220_funcs(dd);
+		break;
 	default:
 		ipath_dev_err(dd, "Found unknown QLogic deviceid 0x%x, "
 			      "failing\n", ent->device);
@@ -887,13 +897,47 @@ int ipath_wait_linkstate(struct ipath_devdata *dd, u32 state, int msecs)
 	return (dd->ipath_flags & state) ? 0 : -ETIMEDOUT;
 }
 
+static void decode_sdma_errs(struct ipath_devdata *dd, ipath_err_t err,
+	char *buf, size_t blen)
+{
+	static const struct {
+		ipath_err_t err;
+		const char *msg;
+	} errs[] = {
+		{ INFINIPATH_E_SDMAGENMISMATCH, "SDmaGenMismatch" },
+		{ INFINIPATH_E_SDMAOUTOFBOUND, "SDmaOutOfBound" },
+		{ INFINIPATH_E_SDMATAILOUTOFBOUND, "SDmaTailOutOfBound" },
+		{ INFINIPATH_E_SDMABASE, "SDmaBase" },
+		{ INFINIPATH_E_SDMA1STDESC, "SDma1stDesc" },
+		{ INFINIPATH_E_SDMARPYTAG, "SDmaRpyTag" },
+		{ INFINIPATH_E_SDMADWEN, "SDmaDwEn" },
+		{ INFINIPATH_E_SDMAMISSINGDW, "SDmaMissingDw" },
+		{ INFINIPATH_E_SDMAUNEXPDATA, "SDmaUnexpData" },
+		{ INFINIPATH_E_SDMADESCADDRMISALIGN, "SDmaDescAddrMisalign" },
+		{ INFINIPATH_E_SENDBUFMISUSE, "SendBufMisuse" },
+		{ INFINIPATH_E_SDMADISABLED, "SDmaDisabled" },
+	};
+	int i;
+	int expected;
+	size_t bidx = 0;
+
+	for (i = 0; i < ARRAY_SIZE(errs); i++) {
+		expected = (errs[i].err != INFINIPATH_E_SDMADISABLED) ? 0 :
+			test_bit(IPATH_SDMA_ABORTING, &dd->ipath_sdma_status);
+		if ((err & errs[i].err) && !expected)
+			bidx += snprintf(buf + bidx, blen - bidx,
+					 "%s ", errs[i].msg);
+	}
+}
+
 /*
  * Decode the error status into strings, deciding whether to always
  * print * it or not depending on "normal packet errors" vs everything
  * else.   Return 1 if "real" errors, otherwise 0 if only packet
  * errors, so caller can decide what to print with the string.
  */
-int ipath_decode_err(char *buf, size_t blen, ipath_err_t err)
+int ipath_decode_err(struct ipath_devdata *dd, char *buf, size_t blen,
+	ipath_err_t err)
 {
 	int iserr = 1;
 	*buf = '\0';
@@ -975,6 +1019,8 @@ int ipath_decode_err(char *buf, size_t blen, ipath_err_t err)
 		strlcat(buf, "hardware ", blen);
 	if (err & INFINIPATH_E_RESET)
 		strlcat(buf, "reset ", blen);
+	if (err & INFINIPATH_E_SDMAERRS)
+		decode_sdma_errs(dd, err, buf, blen);
 	if (err & INFINIPATH_E_INVALIDEEPCMD)
 		strlcat(buf, "invalideepromcmd ", blen);
 done:
@@ -1730,30 +1776,80 @@ bail:
  */
 void ipath_cancel_sends(struct ipath_devdata *dd, int restore_sendctrl)
 {
+	unsigned long flags;
+
 	if (dd->ipath_flags & IPATH_IB_AUTONEG_INPROG) {
 		ipath_cdbg(VERBOSE, "Ignore while in autonegotiation\n");
 		goto bail;
 	}
+	/*
+	 * If we have SDMA, and it's not disabled, we have to kick off the
+	 * abort state machine, provided we aren't already aborting.
+	 * If we are in the process of aborting SDMA (!DISABLED, but ABORTING),
+	 * we skip the rest of this routine. It is already "in progress"
+	 */
+	if (dd->ipath_flags & IPATH_HAS_SEND_DMA) {
+		int skip_cancel;
+		u64 *statp = &dd->ipath_sdma_status;
+
+		spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
+		skip_cancel =
+			!test_bit(IPATH_SDMA_DISABLED, statp) &&
+			test_and_set_bit(IPATH_SDMA_ABORTING, statp);
+		spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
+		if (skip_cancel)
+			goto bail;
+	}
+
 	ipath_dbg("Cancelling all in-progress send buffers\n");
 
 	/* skip armlaunch errs for a while */
 	dd->ipath_lastcancel = jiffies + HZ / 2;
 
 	/*
-	 * the abort bit is auto-clearing.  We read scratch to be sure
-	 * that cancels and the abort have taken effect in the chip.
+	 * The abort bit is auto-clearing.  We also don't want pioavail
+	 * update happening during this, and we don't want any other
+	 * sends going out, so turn those off for the duration.  We read
+	 * the scratch register to be sure that cancels and the abort
+	 * have taken effect in the chip.  Otherwise two parts are same
+	 * as ipath_force_pio_avail_update()
 	 */
+	spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
+	dd->ipath_sendctrl &= ~(INFINIPATH_S_PIOBUFAVAILUPD
+		| INFINIPATH_S_PIOENABLE);
 	ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
-		INFINIPATH_S_ABORT);
+		dd->ipath_sendctrl | INFINIPATH_S_ABORT);
 	ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+	spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
+
+	/* disarm all send buffers */
 	ipath_disarm_piobufs(dd, 0,
-		(unsigned)(dd->ipath_piobcnt2k + dd->ipath_piobcnt4k));
-	if (restore_sendctrl) /* else done by caller later */
+		dd->ipath_piobcnt2k + dd->ipath_piobcnt4k);
+
+	if (restore_sendctrl) {
+		/* else done by caller later if needed */
+		spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
+		dd->ipath_sendctrl |= INFINIPATH_S_PIOBUFAVAILUPD |
+			INFINIPATH_S_PIOENABLE;
 		ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
-				 dd->ipath_sendctrl);
+			dd->ipath_sendctrl);
+		/* and again, be sure all have hit the chip */
+		ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+		spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
+	}
 
-	/* and again, be sure all have hit the chip */
-	ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+	if ((dd->ipath_flags & IPATH_HAS_SEND_DMA) &&
+	    !test_bit(IPATH_SDMA_DISABLED, &dd->ipath_sdma_status) &&
+	    test_bit(IPATH_SDMA_RUNNING, &dd->ipath_sdma_status)) {
+		spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
+		/* only wait so long for intr */
+		dd->ipath_sdma_abort_intr_timeout = jiffies + HZ;
+		dd->ipath_sdma_reset_wait = 200;
+		__set_bit(IPATH_SDMA_DISARMED, &dd->ipath_sdma_status);
+		if (!test_bit(IPATH_SDMA_SHUTDOWN, &dd->ipath_sdma_status))
+			tasklet_hi_schedule(&dd->ipath_sdma_abort_task);
+		spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
+	}
 bail:;
 }
 
@@ -1952,7 +2048,7 @@ bail:
  * sanity checking on this, and we don't deal with what happens to
  * programs that are already running when the size changes.
  * NOTE: changing the MTU will usually cause the IBC to go back to
- * link initialize (IPATH_IBSTATE_INIT) state...
+ * link INIT state...
  */
 int ipath_set_mtu(struct ipath_devdata *dd, u16 arg)
 {
@@ -2092,9 +2188,8 @@ static void ipath_run_led_override(unsigned long opaque)
 	 * but leave that to per-chip functions.
 	 */
 	val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus);
-	ltstate = (val >> INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) &
-		  dd->ibcs_lts_mask;
-	lstate = (val >> dd->ibcs_ls_shift) & INFINIPATH_IBCS_LINKSTATE_MASK;
+	ltstate = ipath_ib_linktrstate(dd, val);
+	lstate = ipath_ib_linkstate(dd, val);
 
 	dd->ipath_f_setextled(dd, lstate, ltstate);
 	mod_timer(&dd->ipath_led_override_timer, jiffies + timeoff);
@@ -2170,6 +2265,9 @@ void ipath_shutdown_device(struct ipath_devdata *dd)
 	ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
 			 dd->ipath_rcvctrl);
 
+	if (dd->ipath_flags & IPATH_HAS_SEND_DMA)
+		teardown_sdma(dd);
+
 	/*
 	 * gracefully stop all sends allowing any in progress to trickle out
 	 * first.
@@ -2187,9 +2285,16 @@ void ipath_shutdown_device(struct ipath_devdata *dd)
 	 */
 	udelay(5);
 
+	dd->ipath_f_setextled(dd, 0, 0); /* make sure LEDs are off */
+
 	ipath_set_ib_lstate(dd, 0, INFINIPATH_IBCC_LINKINITCMD_DISABLE);
 	ipath_cancel_sends(dd, 0);
 
+	/*
+	 * we are shutting down, so tell components that care.  We don't do
+	 * this on just a link state change, much like ethernet, a cable
+	 * unplug, etc. doesn't change driver state
+	 */
 	signal_ib_event(dd, IB_EVENT_PORT_ERR);
 
 	/* disable IBC */
@@ -2214,6 +2319,10 @@ void ipath_shutdown_device(struct ipath_devdata *dd)
 		del_timer_sync(&dd->ipath_intrchk_timer);
 		dd->ipath_intrchk_timer.data = 0;
 	}
+	if (atomic_read(&dd->ipath_led_override_timer_active)) {
+		del_timer_sync(&dd->ipath_led_override_timer);
+		atomic_set(&dd->ipath_led_override_timer_active, 0);
+	}
 
 	/*
 	 * clear all interrupts and errors, so that the next time the driver
@@ -2408,13 +2517,18 @@ int ipath_reset_device(int unit)
 			}
 		}
 
+	if (dd->ipath_flags & IPATH_HAS_SEND_DMA)
+		teardown_sdma(dd);
+
 	dd->ipath_flags &= ~IPATH_INITTED;
+	ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask, 0ULL);
 	ret = dd->ipath_f_reset(dd);
-	if (ret != 1)
-		ipath_dbg("reset was not successful\n");
-	ipath_dbg("Trying to reinitialize unit %u after reset attempt\n",
-		  unit);
-	ret = ipath_init_chip(dd, 1);
+	if (ret == 1) {
+		ipath_dbg("Reinitializing unit %u after reset attempt\n",
+			  unit);
+		ret = ipath_init_chip(dd, 1);
+	} else
+		ret = -EAGAIN;
 	if (ret)
 		ipath_dev_err(dd, "Reinitialize unit %u after "
 			      "reset failed with %d\n", unit, ret);