Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 453 insertions, 0 deletions

diff --git a/drivers/media/video/saa7134/saa7134-i2c.c b/drivers/media/video/saa7134/saa7134-i2c.c
new file mode 100644
index 0000000..702bb63
--- /dev/null
+++ b/drivers/media/video/saa7134/saa7134-i2c.c
@@ -0,0 +1,453 @@
+/*
+ * $Id: saa7134-i2c.c,v 1.10 2005/01/24 17:37:23 kraxel Exp $
+ *
+ * device driver for philips saa7134 based TV cards
+ * i2c interface support
+ *
+ * (c) 2001,02 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+
+#include "saa7134-reg.h"
+#include "saa7134.h"
+
+/* ----------------------------------------------------------- */
+
+static unsigned int i2c_debug = 0;
+module_param(i2c_debug, int, 0644);
+MODULE_PARM_DESC(i2c_debug,"enable debug messages [i2c]");
+
+static unsigned int i2c_scan = 0;
+module_param(i2c_scan, int, 0444);
+MODULE_PARM_DESC(i2c_scan,"scan i2c bus at insmod time");
+
+#define d1printk if (1 == i2c_debug) printk
+#define d2printk if (2 == i2c_debug) printk
+
+#define I2C_WAIT_DELAY  32
+#define I2C_WAIT_RETRY  16
+
+/* ----------------------------------------------------------- */
+
+static char *str_i2c_status[] = {
+	"IDLE", "DONE_STOP", "BUSY", "TO_SCL", "TO_ARB", "DONE_WRITE",
+	"DONE_READ", "DONE_WRITE_TO", "DONE_READ_TO", "NO_DEVICE",
+	"NO_ACKN", "BUS_ERR", "ARB_LOST", "SEQ_ERR", "ST_ERR", "SW_ERR"
+};
+
+enum i2c_status {
+	IDLE          = 0,  // no I2C command pending
+	DONE_STOP     = 1,  // I2C command done and STOP executed
+	BUSY          = 2,  // executing I2C command
+	TO_SCL        = 3,  // executing I2C command, time out on clock stretching
+	TO_ARB        = 4,  // time out on arbitration trial, still trying
+	DONE_WRITE    = 5,  // I2C command done and awaiting next write command
+	DONE_READ     = 6,  // I2C command done and awaiting next read command
+	DONE_WRITE_TO = 7,  // see 5, and time out on status echo
+	DONE_READ_TO  = 8,  // see 6, and time out on status echo
+	NO_DEVICE     = 9,  // no acknowledge on device slave address
+	NO_ACKN       = 10, // no acknowledge after data byte transfer
+	BUS_ERR       = 11, // bus error
+	ARB_LOST      = 12, // arbitration lost during transfer
+	SEQ_ERR       = 13, // erroneous programming sequence
+	ST_ERR        = 14, // wrong status echoing
+	SW_ERR        = 15  // software error
+};
+
+static char *str_i2c_attr[] = {
+	"NOP", "STOP", "CONTINUE", "START"
+};
+
+enum i2c_attr {
+	NOP           = 0,  // no operation on I2C bus
+	STOP          = 1,  // stop condition, no associated byte transfer
+	CONTINUE      = 2,  // continue with byte transfer
+	START         = 3   // start condition with byte transfer
+};
+
+static inline enum i2c_status i2c_get_status(struct saa7134_dev *dev)
+{
+	enum i2c_status status;
+
+	status = saa_readb(SAA7134_I2C_ATTR_STATUS) & 0x0f;
+	d2printk(KERN_DEBUG "%s: i2c stat <= %s\n",dev->name,
+		 str_i2c_status[status]);
+	return status;
+}
+
+static inline void i2c_set_status(struct saa7134_dev *dev,
+				  enum i2c_status status)
+{
+	d2printk(KERN_DEBUG "%s: i2c stat => %s\n",dev->name,
+		 str_i2c_status[status]);
+	saa_andorb(SAA7134_I2C_ATTR_STATUS,0x0f,status);
+}
+
+static inline void i2c_set_attr(struct saa7134_dev *dev, enum i2c_attr attr)
+{
+	d2printk(KERN_DEBUG "%s: i2c attr => %s\n",dev->name,
+		 str_i2c_attr[attr]);
+	saa_andorb(SAA7134_I2C_ATTR_STATUS,0xc0,attr << 6);
+}
+
+static inline int i2c_is_error(enum i2c_status status)
+{
+	switch (status) {
+	case NO_DEVICE:
+	case NO_ACKN:
+	case BUS_ERR:
+	case ARB_LOST:
+	case SEQ_ERR:
+	case ST_ERR:
+		return TRUE;
+	default:
+		return FALSE;
+	}
+}
+
+static inline int i2c_is_idle(enum i2c_status status)
+{
+	switch (status) {
+	case IDLE:
+	case DONE_STOP:
+		return TRUE;
+	default:
+		return FALSE;
+	}
+}
+
+static inline int i2c_is_busy(enum i2c_status status)
+{
+	switch (status) {
+	case BUSY:
+		return TRUE;
+	default:
+		return FALSE;
+	}
+}
+
+static int i2c_is_busy_wait(struct saa7134_dev *dev)
+{
+	enum i2c_status status;
+	int count;
+
+	for (count = 0; count < I2C_WAIT_RETRY; count++) {
+		status = i2c_get_status(dev);
+		if (!i2c_is_busy(status))
+			break;
+		saa_wait(I2C_WAIT_DELAY);
+	}
+	if (I2C_WAIT_RETRY == count)
+		return FALSE;
+	return TRUE;
+}
+
+static int i2c_reset(struct saa7134_dev *dev)
+{
+	enum i2c_status status;
+	int count;
+
+	d2printk(KERN_DEBUG "%s: i2c reset\n",dev->name);
+	status = i2c_get_status(dev);
+	if (!i2c_is_error(status))
+		return TRUE;
+	i2c_set_status(dev,status);
+
+	for (count = 0; count < I2C_WAIT_RETRY; count++) {
+		status = i2c_get_status(dev);
+		if (!i2c_is_error(status))
+			break;
+		udelay(I2C_WAIT_DELAY);
+	}
+	if (I2C_WAIT_RETRY == count)
+		return FALSE;
+
+	if (!i2c_is_idle(status))
+		return FALSE;
+
+	i2c_set_attr(dev,NOP);
+	return TRUE;
+}
+
+static inline int i2c_send_byte(struct saa7134_dev *dev,
+				enum i2c_attr attr,
+				unsigned char data)
+{
+	enum i2c_status status;
+	__u32 dword;
+
+#if 0
+	i2c_set_attr(dev,attr);
+	saa_writeb(SAA7134_I2C_DATA, data);
+#else
+	/* have to write both attr + data in one 32bit word */
+	dword  = saa_readl(SAA7134_I2C_ATTR_STATUS >> 2);
+	dword &= 0x0f;
+	dword |= (attr << 6);
+	dword |= ((__u32)data << 8);
+	dword |= 0x00 << 16;  /* 100 kHz */
+//	dword |= 0x40 << 16;  /* 400 kHz */
+	dword |= 0xf0 << 24;
+	saa_writel(SAA7134_I2C_ATTR_STATUS >> 2, dword);
+#endif
+	d2printk(KERN_DEBUG "%s: i2c data => 0x%x\n",dev->name,data);
+
+	if (!i2c_is_busy_wait(dev))
+		return -EIO;
+	status = i2c_get_status(dev);
+	if (i2c_is_error(status))
+		return -EIO;
+	return 0;
+}
+
+static inline int i2c_recv_byte(struct saa7134_dev *dev)
+{
+	enum i2c_status status;
+	unsigned char data;
+
+	i2c_set_attr(dev,CONTINUE);
+	if (!i2c_is_busy_wait(dev))
+		return -EIO;
+	status = i2c_get_status(dev);
+	if (i2c_is_error(status))
+		return -EIO;
+	data = saa_readb(SAA7134_I2C_DATA);
+	d2printk(KERN_DEBUG "%s: i2c data <= 0x%x\n",dev->name,data);
+	return data;
+}
+
+static int saa7134_i2c_xfer(struct i2c_adapter *i2c_adap,
+			    struct i2c_msg *msgs, int num)
+{
+	struct saa7134_dev *dev = i2c_adap->algo_data;
+	enum i2c_status status;
+	unsigned char data;
+	int addr,rc,i,byte;
+
+  	status = i2c_get_status(dev);
+	if (!i2c_is_idle(status))
+		if (!i2c_reset(dev))
+			return -EIO;
+
+	d2printk("start xfer\n");
+	d1printk(KERN_DEBUG "%s: i2c xfer:",dev->name);
+	for (i = 0; i < num; i++) {
+		if (!(msgs[i].flags & I2C_M_NOSTART) || 0 == i) {
+			/* send address */
+			d2printk("send address\n");
+			addr  = msgs[i].addr << 1;
+			if (msgs[i].flags & I2C_M_RD)
+				addr |= 1;
+			if (i > 0 && msgs[i].flags & I2C_M_RD) {
+				/* workaround for a saa7134 i2c bug
+				 * needed to talk to the mt352 demux
+				 * thanks to pinnacle for the hint */
+				int quirk = 0xfd;
+				d1printk(" [%02x quirk]",quirk);
+				i2c_send_byte(dev,START,quirk);
+				i2c_recv_byte(dev);
+			}
+			d1printk(" < %02x", addr);
+			rc = i2c_send_byte(dev,START,addr);
+			if (rc < 0)
+				 goto err;
+		}
+		if (msgs[i].flags & I2C_M_RD) {
+			/* read bytes */
+			d2printk("read bytes\n");
+			for (byte = 0; byte < msgs[i].len; byte++) {
+				d1printk(" =");
+				rc = i2c_recv_byte(dev);
+				if (rc < 0)
+					goto err;
+				d1printk("%02x", rc);
+				msgs[i].buf[byte] = rc;
+			}
+		} else {
+			/* write bytes */
+			d2printk("write bytes\n");
+			for (byte = 0; byte < msgs[i].len; byte++) {
+				data = msgs[i].buf[byte];
+				d1printk(" %02x", data);
+				rc = i2c_send_byte(dev,CONTINUE,data);
+				if (rc < 0)
+					goto err;
+			}
+		}
+	}
+	d2printk("xfer done\n");
+	d1printk(" >");
+	i2c_set_attr(dev,STOP);
+	rc = -EIO;
+	if (!i2c_is_busy_wait(dev))
+		goto err;
+  	status = i2c_get_status(dev);
+	if (i2c_is_error(status))
+		goto err;
+
+	d1printk("\n");
+	return num;
+ err:
+	if (1 == i2c_debug) {
+		status = i2c_get_status(dev);
+		printk(" ERROR: %s\n",str_i2c_status[status]);
+	}
+	return rc;
+}
+
+/* ----------------------------------------------------------- */
+
+static int algo_control(struct i2c_adapter *adapter,
+			unsigned int cmd, unsigned long arg)
+{
+	return 0;
+}
+
+static u32 functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_SMBUS_EMUL;
+}
+
+static int attach_inform(struct i2c_client *client)
+{
+        struct saa7134_dev *dev = client->adapter->algo_data;
+	int tuner = dev->tuner_type;
+	int conf  = dev->tda9887_conf;
+
+	saa7134_i2c_call_clients(dev,TUNER_SET_TYPE,&tuner);
+	saa7134_i2c_call_clients(dev,TDA9887_SET_CONFIG,&conf);
+        return 0;
+}
+
+static struct i2c_algorithm saa7134_algo = {
+	.name          = "saa7134",
+	.id            = I2C_ALGO_SAA7134,
+	.master_xfer   = saa7134_i2c_xfer,
+	.algo_control  = algo_control,
+	.functionality = functionality,
+};
+
+static struct i2c_adapter saa7134_adap_template = {
+	.owner         = THIS_MODULE,
+#ifdef I2C_CLASS_TV_ANALOG
+	.class         = I2C_CLASS_TV_ANALOG,
+#endif
+	I2C_DEVNAME("saa7134"),
+	.id            = I2C_ALGO_SAA7134,
+	.algo          = &saa7134_algo,
+	.client_register = attach_inform,
+};
+
+static struct i2c_client saa7134_client_template = {
+	I2C_DEVNAME("saa7134 internal"),
+};
+
+/* ----------------------------------------------------------- */
+
+static int
+saa7134_i2c_eeprom(struct saa7134_dev *dev, unsigned char *eedata, int len)
+{
+	unsigned char buf;
+	int i,err;
+
+	dev->i2c_client.addr = 0xa0 >> 1;
+	buf = 0;
+	if (1 != (err = i2c_master_send(&dev->i2c_client,&buf,1))) {
+		printk(KERN_INFO "%s: Huh, no eeprom present (err=%d)?\n",
+		       dev->name,err);
+		return -1;
+	}
+	if (len != (err = i2c_master_recv(&dev->i2c_client,eedata,len))) {
+		printk(KERN_WARNING "%s: i2c eeprom read error (err=%d)\n",
+		       dev->name,err);
+		return -1;
+	}
+	for (i = 0; i < len; i++) {
+		if (0 == (i % 16))
+			printk(KERN_INFO "%s: i2c eeprom %02x:",dev->name,i);
+		printk(" %02x",eedata[i]);
+		if (15 == (i % 16))
+			printk("\n");
+	}
+	return 0;
+}
+
+static char *i2c_devs[128] = {
+	[ 0x20      ] = "mpeg encoder (saa6752hs)",
+	[ 0xa0 >> 1 ] = "eeprom",
+	[ 0xc0 >> 1 ] = "tuner (analog)",
+	[ 0x86 >> 1 ] = "tda9887",
+};
+
+static void do_i2c_scan(char *name, struct i2c_client *c)
+{
+	unsigned char buf;
+	int i,rc;
+
+	for (i = 0; i < 128; i++) {
+		c->addr = i;
+		rc = i2c_master_recv(c,&buf,0);
+		if (rc < 0)
+			continue;
+		printk("%s: i2c scan: found device @ 0x%x  [%s]\n",
+		       name, i << 1, i2c_devs[i] ? i2c_devs[i] : "???");
+	}
+}
+
+void saa7134_i2c_call_clients(struct saa7134_dev *dev,
+			      unsigned int cmd, void *arg)
+{
+	BUG_ON(NULL == dev->i2c_adap.algo_data);
+	i2c_clients_command(&dev->i2c_adap, cmd, arg);
+}
+
+int saa7134_i2c_register(struct saa7134_dev *dev)
+{
+	dev->i2c_adap = saa7134_adap_template;
+	dev->i2c_adap.dev.parent = &dev->pci->dev;
+	strcpy(dev->i2c_adap.name,dev->name);
+	dev->i2c_adap.algo_data = dev;
+	i2c_add_adapter(&dev->i2c_adap);
+
+	dev->i2c_client = saa7134_client_template;
+	dev->i2c_client.adapter = &dev->i2c_adap;
+
+	saa7134_i2c_eeprom(dev,dev->eedata,sizeof(dev->eedata));
+	if (i2c_scan)
+		do_i2c_scan(dev->name,&dev->i2c_client);
+	return 0;
+}
+
+int saa7134_i2c_unregister(struct saa7134_dev *dev)
+{
+	i2c_del_adapter(&dev->i2c_adap);
+	return 0;
+}
+
+/* ----------------------------------------------------------- */
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */