aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/media
diff options
context:
space:
mode:
authorMauro Carvalho Chehab <mchehab@redhat.com>2008-11-12 08:41:29 -0300
committerMauro Carvalho Chehab <mchehab@redhat.com>2008-12-29 17:53:33 -0200
commita924a499adb89f52046936deac87264774652a81 (patch)
tree657e649eff39c384c1413e5acfb453001a249bc8 /drivers/media
parent1958578da6f3971227fca94a62429cdf0bd3c699 (diff)
downloadkernel_samsung_smdk4412-a924a499adb89f52046936deac87264774652a81.zip
kernel_samsung_smdk4412-a924a499adb89f52046936deac87264774652a81.tar.gz
kernel_samsung_smdk4412-a924a499adb89f52046936deac87264774652a81.tar.bz2
V4L/DVB (9607): em28xx: Properly implement poll support for IR's
The first em28xx were based on i2c IR's. However, some newer designs are coming with a polling-based IR. Those are done by reading a register set at em28xx. This patch adds core polling support for those devices. Later patches will add support for some device-specific IR's. This patch adds the same basic IR polling code used by bttv, cx88 and saa7134, and shares the common getkey masks defined at ir-common. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Diffstat (limited to 'drivers/media')
-rw-r--r--drivers/media/video/em28xx/em28xx-cards.c2
-rw-r--r--drivers/media/video/em28xx/em28xx-input.c233
-rw-r--r--drivers/media/video/em28xx/em28xx-reg.h7
-rw-r--r--drivers/media/video/em28xx/em28xx-video.c4
-rw-r--r--drivers/media/video/em28xx/em28xx.h6
5 files changed, 237 insertions, 15 deletions
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index e425111..1d38bfa 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -1843,4 +1843,6 @@ void em28xx_card_setup(struct em28xx *dev)
#endif
em28xx_config_tuner(dev);
+
+ em28xx_ir_init(dev);
}
diff --git a/drivers/media/video/em28xx/em28xx-input.c b/drivers/media/video/em28xx/em28xx-input.c
index eab3d95..afd6760 100644
--- a/drivers/media/video/em28xx/em28xx-input.c
+++ b/drivers/media/video/em28xx/em28xx-input.c
@@ -38,12 +38,42 @@ static unsigned int ir_debug;
module_param(ir_debug, int, 0644);
MODULE_PARM_DESC(ir_debug, "enable debug messages [IR]");
-#define dprintk(fmt, arg...) \
+#define i2cdprintk(fmt, arg...) \
if (ir_debug) { \
printk(KERN_DEBUG "%s/ir: " fmt, ir->c.name , ## arg); \
}
-/* ----------------------------------------------------------------------- */
+#define dprintk(fmt, arg...) \
+ if (ir_debug) { \
+ printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg); \
+ }
+
+/**********************************************************
+ Polling structure used by em28xx IR's
+ **********************************************************/
+
+struct em28xx_IR {
+ struct em28xx *dev;
+ struct input_dev *input;
+ struct ir_input_state ir;
+ char name[32];
+ char phys[32];
+
+ /* poll external decoder */
+ int polling;
+ struct work_struct work;
+ struct timer_list timer;
+ u32 last_gpio;
+ u32 mask_keycode;
+ u32 mask_keydown;
+ u32 mask_keyup;
+
+ int (*get_key)(struct em28xx_IR *);
+};
+
+/**********************************************************
+ I2C IR based get keycodes - should be used with ir-kbd-i2c
+ **********************************************************/
int em28xx_get_key_terratec(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
{
@@ -51,7 +81,7 @@ int em28xx_get_key_terratec(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
/* poll IR chip */
if (1 != i2c_master_recv(&ir->c, &b, 1)) {
- dprintk("read error\n");
+ i2cdprintk("read error\n");
return -EIO;
}
@@ -59,7 +89,7 @@ int em28xx_get_key_terratec(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
down, while 0xff indicates that no button is hold
down. 0xfe sequences are sometimes interrupted by 0xFF */
- dprintk("key %02x\n", b);
+ i2cdprintk("key %02x\n", b);
if (b == 0xff)
return 0;
@@ -73,7 +103,6 @@ int em28xx_get_key_terratec(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
return 1;
}
-
int em28xx_get_key_em_haup(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
{
unsigned char buf[2];
@@ -97,7 +126,7 @@ int em28xx_get_key_em_haup(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
((buf[0]&0x10)>>3) | /* 0000 0010 */
((buf[0]&0x20)>>5); /* 0000 0001 */
- dprintk("ir hauppauge (em2840): code=0x%02x (rcv=0x%02x)\n",
+ i2cdprintk("ir hauppauge (em2840): code=0x%02x (rcv=0x%02x)\n",
code, buf[0]);
/* return key */
@@ -114,11 +143,11 @@ int em28xx_get_key_pinnacle_usb_grey(struct IR_i2c *ir, u32 *ir_key,
/* poll IR chip */
if (3 != i2c_master_recv(&ir->c, buf, 3)) {
- dprintk("read error\n");
+ i2cdprintk("read error\n");
return -EIO;
}
- dprintk("key %02x\n", buf[2]&0x3f);
+ i2cdprintk("key %02x\n", buf[2]&0x3f);
if (buf[0] != 0x00)
return 0;
@@ -128,6 +157,188 @@ int em28xx_get_key_pinnacle_usb_grey(struct IR_i2c *ir, u32 *ir_key,
return 1;
}
+/**********************************************************
+ Poll based get keycode functions
+ **********************************************************/
+
+static int default_polling_getkey(struct em28xx_IR *ir)
+{
+ struct em28xx *dev = ir->dev;
+ int rc;
+ u32 msg;
+
+ /* Read key toggle, brand, and key code */
+ rc = dev->em28xx_read_reg_req_len(dev, 0, EM28XX_R45_IR,
+ (u8 *)&msg, sizeof(msg));
+ if (rc < 0)
+ return rc;
+
+ return (int)(msg & 0x7fffffffl);
+}
+
+/**********************************************************
+ Polling code for em28xx
+ **********************************************************/
+
+static void em28xx_ir_handle_key(struct em28xx_IR *ir)
+{
+ int gpio;
+ u32 data;
+
+ /* read gpio value */
+ gpio = ir->get_key(ir);
+ if (gpio < 0)
+ return;
+
+ if (gpio == ir->last_gpio)
+ return;
+ ir->last_gpio = gpio;
+
+ /* extract data */
+ data = ir_extract_bits(gpio, ir->mask_keycode);
+ dprintk("irq gpio=0x%x code=%d | poll%s%s\n",
+ gpio, data,
+ (gpio & ir->mask_keydown) ? " down" : "",
+ (gpio & ir->mask_keyup) ? " up" : "");
+
+ /* Generate keyup/keydown events */
+ if (ir->mask_keydown) {
+ /* bit set on keydown */
+ if (gpio & ir->mask_keydown)
+ ir_input_keydown(ir->input, &ir->ir, data, data);
+ else
+ ir_input_nokey(ir->input, &ir->ir);
+ } else if (ir->mask_keyup) {
+ /* bit cleared on keydown */
+ if (!(gpio & ir->mask_keyup))
+ ir_input_keydown(ir->input, &ir->ir, data, data);
+ else
+ ir_input_nokey(ir->input, &ir->ir);
+ } else {
+ /* can't distinguish keydown/up :-/ */
+ ir_input_keydown(ir->input, &ir->ir, data, data);
+ ir_input_nokey(ir->input, &ir->ir);
+ }
+}
+
+static void ir_timer(unsigned long data)
+{
+ struct em28xx_IR *ir = (struct em28xx_IR *)data;
+
+ schedule_work(&ir->work);
+}
+
+static void em28xx_ir_work(struct work_struct *work)
+{
+ struct em28xx_IR *ir = container_of(work, struct em28xx_IR, work);
+
+ em28xx_ir_handle_key(ir);
+ mod_timer(&ir->timer, jiffies + msecs_to_jiffies(ir->polling));
+}
+
+void em28xx_ir_start(struct em28xx_IR *ir)
+{
+ setup_timer(&ir->timer, ir_timer, (unsigned long)ir);
+ INIT_WORK(&ir->work, em28xx_ir_work);
+ schedule_work(&ir->work);
+}
+
+static void em28xx_ir_stop(struct em28xx_IR *ir)
+{
+ del_timer_sync(&ir->timer);
+ flush_scheduled_work();
+}
+
+int em28xx_ir_init(struct em28xx *dev)
+{
+ struct em28xx_IR *ir;
+ struct input_dev *input_dev;
+ IR_KEYTAB_TYPE *ir_codes = NULL;
+ int ir_type = IR_TYPE_OTHER;
+ int err = -ENOMEM;
+
+ ir = kzalloc(sizeof(*ir), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!ir || !input_dev)
+ goto err_out_free;
+
+ ir->input = input_dev;
+
+ /* */
+ ir->get_key = default_polling_getkey;
+ ir->polling = 50; /* ms */
+
+ /* detect & configure */
+ switch (dev->model) {
+ }
+
+ if (NULL == ir_codes) {
+ err = -ENODEV;
+ goto err_out_free;
+ }
+
+ /* Get the current key status, to avoid adding an
+ unexistent key code */
+ ir->last_gpio = ir->get_key(ir);
+
+ /* init input device */
+ snprintf(ir->name, sizeof(ir->name), "em28xx IR (%s)",
+ dev->name);
+
+ usb_make_path(dev->udev, ir->phys, sizeof(ir->phys));
+ strlcat(ir->phys, "/input0", sizeof(ir->phys));
+
+ ir_input_init(input_dev, &ir->ir, ir_type, ir_codes);
+ input_dev->name = ir->name;
+ input_dev->phys = ir->phys;
+ input_dev->id.bustype = BUS_USB;
+ input_dev->id.version = 1;
+ input_dev->id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
+ input_dev->id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
+
+ input_dev->dev.parent = &dev->udev->dev;
+ /* record handles to ourself */
+ ir->dev = dev;
+ dev->ir = ir;
+
+ em28xx_ir_start(ir);
+
+ /* all done */
+ err = input_register_device(ir->input);
+ if (err)
+ goto err_out_stop;
+
+ return 0;
+ err_out_stop:
+ em28xx_ir_stop(ir);
+ dev->ir = NULL;
+ err_out_free:
+ input_free_device(input_dev);
+ kfree(ir);
+ return err;
+}
+
+int em28xx_ir_fini(struct em28xx *dev)
+{
+ struct em28xx_IR *ir = dev->ir;
+
+ /* skip detach on non attached boards */
+ if (!ir)
+ return 0;
+
+ em28xx_ir_stop(ir);
+ input_unregister_device(ir->input);
+ kfree(ir);
+
+ /* done */
+ dev->ir = NULL;
+ return 0;
+}
+
+/**********************************************************
+ Handle Webcam snapshot button
+ **********************************************************/
+
static void em28xx_query_sbutton(struct work_struct *work)
{
/* Poll the register and see if the button is depressed */
@@ -210,9 +421,3 @@ void em28xx_deregister_snapshot_button(struct em28xx *dev)
}
return;
}
-
-/* ----------------------------------------------------------------------
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/video/em28xx/em28xx-reg.h b/drivers/media/video/em28xx/em28xx-reg.h
index 50d1790..f67955a 100644
--- a/drivers/media/video/em28xx/em28xx-reg.h
+++ b/drivers/media/video/em28xx/em28xx-reg.h
@@ -71,6 +71,13 @@
#define EM28XX_R42_AC97ADDR 0x42
#define EM28XX_R43_AC97BUSY 0x43
+#define EM28XX_R45_IR 0x45
+ /* 0x45 bit 7 - parity bit
+ bits 6-0 - count
+ 0x46 IR brand
+ 0x47 IR data
+ */
+
/* em202 registers */
#define EM28XX_R02_MASTER_AC97 0x02
#define EM28XX_R10_LINE_IN_AC97 0x10
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 129bd06..154a99c 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -1603,6 +1603,10 @@ static void em28xx_release_resources(struct em28xx *dev)
list_del(&dev->devlist);
if (dev->sbutton_input_dev)
em28xx_deregister_snapshot_button(dev);
+
+ if (dev->ir)
+ em28xx_ir_fini(dev);
+
if (dev->radio_dev) {
if (-1 != dev->radio_dev->minor)
video_unregister_device(dev->radio_dev);
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index 1350a9c..73fd9e9 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -384,6 +384,8 @@ struct em28xx {
unsigned int has_snapshot_button:1;
unsigned int valid:1; /* report for validated boards */
+ struct em28xx_IR *ir;
+
/* Some older em28xx chips needs a waiting time after writing */
unsigned int wait_after_write;
@@ -544,7 +546,6 @@ void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir);
int em28xx_tuner_callback(void *ptr, int component, int command, int arg);
/* Provided by em28xx-input.c */
-/* TODO: Check if the standard get_key handlers on ir-common can be used */
int em28xx_get_key_terratec(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw);
int em28xx_get_key_em_haup(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw);
int em28xx_get_key_pinnacle_usb_grey(struct IR_i2c *ir, u32 *ir_key,
@@ -552,6 +553,9 @@ int em28xx_get_key_pinnacle_usb_grey(struct IR_i2c *ir, u32 *ir_key,
void em28xx_register_snapshot_button(struct em28xx *dev);
void em28xx_deregister_snapshot_button(struct em28xx *dev);
+int em28xx_ir_init(struct em28xx *dev);
+int em28xx_ir_fini(struct em28xx *dev);
+
/* printk macros */
#define em28xx_err(fmt, arg...) do {\