ath9k_htc: Add TSF adjust capability

In multi-interface mode, beacons/probe responses that are
sent out must have their timestamp field updated. Calculate
the TSF adjustment value for each beaconing interface and set it
in the frame properly.

Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 36 insertions, 0 deletions

diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
index b561f70..2fad613 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
@@ -234,6 +234,7 @@ static void ath9k_htc_send_beacon(struct ath9k_htc_priv *priv,
 	struct tx_beacon_header beacon_hdr;
 	struct ath9k_htc_tx_ctl tx_ctl;
 	struct ieee80211_tx_info *info;
+	struct ieee80211_mgmt *mgmt;
 	struct sk_buff *beacon;
 	u8 *tx_fhdr;
 
@@ -257,6 +258,13 @@ static void ath9k_htc_send_beacon(struct ath9k_htc_priv *priv,
 		return;
 	}
 
+	/*
+	 * Update the TSF adjust value here, the HW will
+	 * add this value for every beacon.
+	 */
+	mgmt = (struct ieee80211_mgmt *)beacon->data;
+	mgmt->u.beacon.timestamp = avp->tsfadjust;
+
 	info = IEEE80211_SKB_CB(beacon);
 	if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
 		struct ieee80211_hdr *hdr =
@@ -406,6 +414,34 @@ void ath9k_htc_remove_bslot(struct ath9k_htc_priv *priv,
 		"Removed interface at beacon slot: %d\n", avp->bslot);
 }
 
+/*
+ * Calculate the TSF adjustment value for all slots
+ * other than zero.
+ */
+void ath9k_htc_set_tsfadjust(struct ath9k_htc_priv *priv,
+			     struct ieee80211_vif *vif)
+{
+	struct ath_common *common = ath9k_hw_common(priv->ah);
+	struct ath9k_htc_vif *avp = (struct ath9k_htc_vif *)vif->drv_priv;
+	struct htc_beacon_config *cur_conf = &priv->cur_beacon_conf;
+	u64 tsfadjust;
+
+	if (avp->bslot == 0)
+		return;
+
+	/*
+	 * The beacon interval cannot be different for multi-AP mode,
+	 * and we reach here only for VIF slots greater than zero,
+	 * so beacon_interval is guaranteed to be set in cur_conf.
+	 */
+	tsfadjust = cur_conf->beacon_interval * avp->bslot / ATH9K_HTC_MAX_BCN_VIF;
+	avp->tsfadjust = cpu_to_le64(TU_TO_USEC(tsfadjust));
+
+	ath_dbg(common, ATH_DBG_CONFIG,
+		"tsfadjust is: %llu for bslot: %d\n",
+		(unsigned long long)tsfadjust, avp->bslot);
+}
+
 static void ath9k_htc_beacon_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
 {
 	bool *beacon_configured = (bool *)data;