Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem

Conflicts:
	drivers/net/wireless/iwlwifi/iwl-core.c
	drivers/net/wireless/rt2x00/rt2x00queue.c
	drivers/net/wireless/rt2x00/rt2x00queue.h

1 files changed, 19 insertions, 9 deletions

diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 198fc0a..d27d7b8 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1446,8 +1446,8 @@ static void rt2500pci_txdone(struct rt2x00_dev *rt2x00dev,
 	}
 }
 
-static void rt2500pci_enable_interrupt(struct rt2x00_dev *rt2x00dev,
-				       struct rt2x00_field32 irq_field)
+static inline void rt2500pci_enable_interrupt(struct rt2x00_dev *rt2x00dev,
+					      struct rt2x00_field32 irq_field)
 {
 	u32 reg;
 
@@ -1687,14 +1687,14 @@ static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	 * Detect if this device has an hardware controlled radio.
 	 */
 	if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
-		__set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
+		__set_bit(CAPABILITY_HW_BUTTON, &rt2x00dev->cap_flags);
 
 	/*
 	 * Check if the BBP tuning should be enabled.
 	 */
 	rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
 	if (!rt2x00_get_field16(eeprom, EEPROM_NIC_DYN_BBP_TUNE))
-		__set_bit(DRIVER_SUPPORT_LINK_TUNING, &rt2x00dev->flags);
+		__set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags);
 
 	/*
 	 * Read the RSSI <-> dBm offset information.
@@ -1958,9 +1958,9 @@ static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * This device requires the atim queue and DMA-mapped skbs.
 	 */
-	__set_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags);
-	__set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags);
-	__set_bit(DRIVER_REQUIRE_SW_SEQNO, &rt2x00dev->flags);
+	__set_bit(REQUIRE_ATIM_QUEUE, &rt2x00dev->cap_flags);
+	__set_bit(REQUIRE_DMA, &rt2x00dev->cap_flags);
+	__set_bit(REQUIRE_SW_SEQNO, &rt2x00dev->cap_flags);
 
 	/*
 	 * Set the rssi offset.
@@ -2013,6 +2013,9 @@ static const struct ieee80211_ops rt2500pci_mac80211_ops = {
 	.tx_last_beacon		= rt2500pci_tx_last_beacon,
 	.rfkill_poll		= rt2x00mac_rfkill_poll,
 	.flush			= rt2x00mac_flush,
+	.set_antenna		= rt2x00mac_set_antenna,
+	.get_antenna		= rt2x00mac_get_antenna,
+	.get_ringparam		= rt2x00mac_get_ringparam,
 };
 
 static const struct rt2x00lib_ops rt2500pci_rt2x00_ops = {
@@ -2033,6 +2036,7 @@ static const struct rt2x00lib_ops rt2500pci_rt2x00_ops = {
 	.start_queue		= rt2500pci_start_queue,
 	.kick_queue		= rt2500pci_kick_queue,
 	.stop_queue		= rt2500pci_stop_queue,
+	.flush_queue		= rt2x00pci_flush_queue,
 	.write_tx_desc		= rt2500pci_write_tx_desc,
 	.write_beacon		= rt2500pci_write_beacon,
 	.fill_rxdone		= rt2500pci_fill_rxdone,
@@ -2094,7 +2098,7 @@ static const struct rt2x00_ops rt2500pci_ops = {
  * RT2500pci module information.
  */
 static DEFINE_PCI_DEVICE_TABLE(rt2500pci_device_table) = {
-	{ PCI_DEVICE(0x1814, 0x0201), PCI_DEVICE_DATA(&rt2500pci_ops) },
+	{ PCI_DEVICE(0x1814, 0x0201) },
 	{ 0, }
 };
 
@@ -2105,10 +2109,16 @@ MODULE_SUPPORTED_DEVICE("Ralink RT2560 PCI & PCMCIA chipset based cards");
 MODULE_DEVICE_TABLE(pci, rt2500pci_device_table);
 MODULE_LICENSE("GPL");
 
+static int rt2500pci_probe(struct pci_dev *pci_dev,
+			   const struct pci_device_id *id)
+{
+	return rt2x00pci_probe(pci_dev, &rt2500pci_ops);
+}
+
 static struct pci_driver rt2500pci_driver = {
 	.name		= KBUILD_MODNAME,
 	.id_table	= rt2500pci_device_table,
-	.probe		= rt2x00pci_probe,
+	.probe		= rt2500pci_probe,
 	.remove		= __devexit_p(rt2x00pci_remove),
 	.suspend	= rt2x00pci_suspend,
 	.resume		= rt2x00pci_resume,