diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/scsi/sata_svw.c | |
download | kernel_samsung_smdk4412-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip kernel_samsung_smdk4412-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz kernel_samsung_smdk4412-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.bz2 |
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/scsi/sata_svw.c')
-rw-r--r-- | drivers/scsi/sata_svw.c | 483 |
1 files changed, 483 insertions, 0 deletions
diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c new file mode 100644 index 0000000..8d1a5d2 --- /dev/null +++ b/drivers/scsi/sata_svw.c @@ -0,0 +1,483 @@ +/* + * sata_svw.c - ServerWorks / Apple K2 SATA + * + * Maintained by: Benjamin Herrenschmidt <benh@kernel.crashing.org> and + * Jeff Garzik <jgarzik@pobox.com> + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2003 Benjamin Herrenschmidt <benh@kernel.crashing.org> + * + * Bits from Jeff Garzik, Copyright RedHat, Inc. + * + * This driver probably works with non-Apple versions of the + * Broadcom chipset... + * + * The contents of this file are subject to the Open + * Software License version 1.1 that can be found at + * http://www.opensource.org/licenses/osl-1.1.txt and is included herein + * by reference. + * + * Alternatively, the contents of this file may be used under the terms + * of the GNU General Public License version 2 (the "GPL") as distributed + * in the kernel source COPYING file, in which case the provisions of + * the GPL are applicable instead of the above. If you wish to allow + * the use of your version of this file only under the terms of the + * GPL and not to allow others to use your version of this file under + * the OSL, indicate your decision by deleting the provisions above and + * replace them with the notice and other provisions required by the GPL. + * If you do not delete the provisions above, a recipient may use your + * version of this file under either the OSL or the GPL. + * + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include "scsi.h" +#include <scsi/scsi_host.h> +#include <linux/libata.h> + +#ifdef CONFIG_PPC_OF +#include <asm/prom.h> +#include <asm/pci-bridge.h> +#endif /* CONFIG_PPC_OF */ + +#define DRV_NAME "sata_svw" +#define DRV_VERSION "1.05" + +/* Taskfile registers offsets */ +#define K2_SATA_TF_CMD_OFFSET 0x00 +#define K2_SATA_TF_DATA_OFFSET 0x00 +#define K2_SATA_TF_ERROR_OFFSET 0x04 +#define K2_SATA_TF_NSECT_OFFSET 0x08 +#define K2_SATA_TF_LBAL_OFFSET 0x0c +#define K2_SATA_TF_LBAM_OFFSET 0x10 +#define K2_SATA_TF_LBAH_OFFSET 0x14 +#define K2_SATA_TF_DEVICE_OFFSET 0x18 +#define K2_SATA_TF_CMDSTAT_OFFSET 0x1c +#define K2_SATA_TF_CTL_OFFSET 0x20 + +/* DMA base */ +#define K2_SATA_DMA_CMD_OFFSET 0x30 + +/* SCRs base */ +#define K2_SATA_SCR_STATUS_OFFSET 0x40 +#define K2_SATA_SCR_ERROR_OFFSET 0x44 +#define K2_SATA_SCR_CONTROL_OFFSET 0x48 + +/* Others */ +#define K2_SATA_SICR1_OFFSET 0x80 +#define K2_SATA_SICR2_OFFSET 0x84 +#define K2_SATA_SIM_OFFSET 0x88 + +/* Port stride */ +#define K2_SATA_PORT_OFFSET 0x100 + + +static u32 k2_sata_scr_read (struct ata_port *ap, unsigned int sc_reg) +{ + if (sc_reg > SCR_CONTROL) + return 0xffffffffU; + return readl((void *) ap->ioaddr.scr_addr + (sc_reg * 4)); +} + + +static void k2_sata_scr_write (struct ata_port *ap, unsigned int sc_reg, + u32 val) +{ + if (sc_reg > SCR_CONTROL) + return; + writel(val, (void *) ap->ioaddr.scr_addr + (sc_reg * 4)); +} + + +static void k2_sata_tf_load(struct ata_port *ap, struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; + + if (tf->ctl != ap->last_ctl) { + writeb(tf->ctl, ioaddr->ctl_addr); + ap->last_ctl = tf->ctl; + ata_wait_idle(ap); + } + if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { + writew(tf->feature | (((u16)tf->hob_feature) << 8), ioaddr->feature_addr); + writew(tf->nsect | (((u16)tf->hob_nsect) << 8), ioaddr->nsect_addr); + writew(tf->lbal | (((u16)tf->hob_lbal) << 8), ioaddr->lbal_addr); + writew(tf->lbam | (((u16)tf->hob_lbam) << 8), ioaddr->lbam_addr); + writew(tf->lbah | (((u16)tf->hob_lbah) << 8), ioaddr->lbah_addr); + } else if (is_addr) { + writew(tf->feature, ioaddr->feature_addr); + writew(tf->nsect, ioaddr->nsect_addr); + writew(tf->lbal, ioaddr->lbal_addr); + writew(tf->lbam, ioaddr->lbam_addr); + writew(tf->lbah, ioaddr->lbah_addr); + } + + if (tf->flags & ATA_TFLAG_DEVICE) + writeb(tf->device, ioaddr->device_addr); + + ata_wait_idle(ap); +} + + +static void k2_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + u16 nsect, lbal, lbam, lbah; + + nsect = tf->nsect = readw(ioaddr->nsect_addr); + lbal = tf->lbal = readw(ioaddr->lbal_addr); + lbam = tf->lbam = readw(ioaddr->lbam_addr); + lbah = tf->lbah = readw(ioaddr->lbah_addr); + tf->device = readw(ioaddr->device_addr); + + if (tf->flags & ATA_TFLAG_LBA48) { + tf->hob_feature = readw(ioaddr->error_addr) >> 8; + tf->hob_nsect = nsect >> 8; + tf->hob_lbal = lbal >> 8; + tf->hob_lbam = lbam >> 8; + tf->hob_lbah = lbah >> 8; + } +} + +/** + * k2_bmdma_setup_mmio - Set up PCI IDE BMDMA transaction (MMIO) + * @qc: Info associated with this ATA transaction. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +static void k2_bmdma_setup_mmio (struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); + u8 dmactl; + void *mmio = (void *) ap->ioaddr.bmdma_addr; + /* load PRD table addr. */ + mb(); /* make sure PRD table writes are visible to controller */ + writel(ap->prd_dma, mmio + ATA_DMA_TABLE_OFS); + + /* specify data direction, triple-check start bit is clear */ + dmactl = readb(mmio + ATA_DMA_CMD); + dmactl &= ~(ATA_DMA_WR | ATA_DMA_START); + if (!rw) + dmactl |= ATA_DMA_WR; + writeb(dmactl, mmio + ATA_DMA_CMD); + + /* issue r/w command if this is not a ATA DMA command*/ + if (qc->tf.protocol != ATA_PROT_DMA) + ap->ops->exec_command(ap, &qc->tf); +} + +/** + * k2_bmdma_start_mmio - Start a PCI IDE BMDMA transaction (MMIO) + * @qc: Info associated with this ATA transaction. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +static void k2_bmdma_start_mmio (struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void *mmio = (void *) ap->ioaddr.bmdma_addr; + u8 dmactl; + + /* start host DMA transaction */ + dmactl = readb(mmio + ATA_DMA_CMD); + writeb(dmactl | ATA_DMA_START, mmio + ATA_DMA_CMD); + /* There is a race condition in certain SATA controllers that can + be seen when the r/w command is given to the controller before the + host DMA is started. On a Read command, the controller would initiate + the command to the drive even before it sees the DMA start. When there + are very fast drives connected to the controller, or when the data request + hits in the drive cache, there is the possibility that the drive returns a part + or all of the requested data to the controller before the DMA start is issued. + In this case, the controller would become confused as to what to do with the data. + In the worst case when all the data is returned back to the controller, the + controller could hang. In other cases it could return partial data returning + in data corruption. This problem has been seen in PPC systems and can also appear + on an system with very fast disks, where the SATA controller is sitting behind a + number of bridges, and hence there is significant latency between the r/w command + and the start command. */ + /* issue r/w command if the access is to ATA*/ + if (qc->tf.protocol == ATA_PROT_DMA) + ap->ops->exec_command(ap, &qc->tf); +} + + +static u8 k2_stat_check_status(struct ata_port *ap) +{ + return readl((void *) ap->ioaddr.status_addr); +} + +#ifdef CONFIG_PPC_OF +/* + * k2_sata_proc_info + * inout : decides on the direction of the dataflow and the meaning of the + * variables + * buffer: If inout==FALSE data is being written to it else read from it + * *start: If inout==FALSE start of the valid data in the buffer + * offset: If inout==FALSE offset from the beginning of the imaginary file + * from which we start writing into the buffer + * length: If inout==FALSE max number of bytes to be written into the buffer + * else number of bytes in the buffer + */ +static int k2_sata_proc_info(struct Scsi_Host *shost, char *page, char **start, + off_t offset, int count, int inout) +{ + struct ata_port *ap; + struct device_node *np; + int len, index; + + /* Find the ata_port */ + ap = (struct ata_port *) &shost->hostdata[0]; + if (ap == NULL) + return 0; + + /* Find the OF node for the PCI device proper */ + np = pci_device_to_OF_node(to_pci_dev(ap->host_set->dev)); + if (np == NULL) + return 0; + + /* Match it to a port node */ + index = (ap == ap->host_set->ports[0]) ? 0 : 1; + for (np = np->child; np != NULL; np = np->sibling) { + u32 *reg = (u32 *)get_property(np, "reg", NULL); + if (!reg) + continue; + if (index == *reg) + break; + } + if (np == NULL) + return 0; + + len = sprintf(page, "devspec: %s\n", np->full_name); + + return len; +} +#endif /* CONFIG_PPC_OF */ + + +static Scsi_Host_Template k2_sata_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .eh_strategy_handler = ata_scsi_error, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, +#ifdef CONFIG_PPC_OF + .proc_info = k2_sata_proc_info, +#endif + .bios_param = ata_std_bios_param, + .ordered_flush = 1, +}; + + +static struct ata_port_operations k2_sata_ops = { + .port_disable = ata_port_disable, + .tf_load = k2_sata_tf_load, + .tf_read = k2_sata_tf_read, + .check_status = k2_stat_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + .phy_reset = sata_phy_reset, + .bmdma_setup = k2_bmdma_setup_mmio, + .bmdma_start = k2_bmdma_start_mmio, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + .scr_read = k2_sata_scr_read, + .scr_write = k2_sata_scr_write, + .port_start = ata_port_start, + .port_stop = ata_port_stop, +}; + +static void k2_sata_setup_port(struct ata_ioports *port, unsigned long base) +{ + port->cmd_addr = base + K2_SATA_TF_CMD_OFFSET; + port->data_addr = base + K2_SATA_TF_DATA_OFFSET; + port->feature_addr = + port->error_addr = base + K2_SATA_TF_ERROR_OFFSET; + port->nsect_addr = base + K2_SATA_TF_NSECT_OFFSET; + port->lbal_addr = base + K2_SATA_TF_LBAL_OFFSET; + port->lbam_addr = base + K2_SATA_TF_LBAM_OFFSET; + port->lbah_addr = base + K2_SATA_TF_LBAH_OFFSET; + port->device_addr = base + K2_SATA_TF_DEVICE_OFFSET; + port->command_addr = + port->status_addr = base + K2_SATA_TF_CMDSTAT_OFFSET; + port->altstatus_addr = + port->ctl_addr = base + K2_SATA_TF_CTL_OFFSET; + port->bmdma_addr = base + K2_SATA_DMA_CMD_OFFSET; + port->scr_addr = base + K2_SATA_SCR_STATUS_OFFSET; +} + + +static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version; + struct ata_probe_ent *probe_ent = NULL; + unsigned long base; + void *mmio_base; + int pci_dev_busy = 0; + int rc; + + if (!printed_version++) + printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); + + /* + * If this driver happens to only be useful on Apple's K2, then + * we should check that here as it has a normal Serverworks ID + */ + rc = pci_enable_device(pdev); + if (rc) + return rc; + /* + * Check if we have resources mapped at all (second function may + * have been disabled by firmware) + */ + if (pci_resource_len(pdev, 5) == 0) + return -ENODEV; + + /* Request PCI regions */ + rc = pci_request_regions(pdev, DRV_NAME); + if (rc) { + pci_dev_busy = 1; + goto err_out; + } + + rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + goto err_out_regions; + rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + goto err_out_regions; + + probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); + if (probe_ent == NULL) { + rc = -ENOMEM; + goto err_out_regions; + } + + memset(probe_ent, 0, sizeof(*probe_ent)); + probe_ent->dev = pci_dev_to_dev(pdev); + INIT_LIST_HEAD(&probe_ent->node); + + mmio_base = ioremap(pci_resource_start(pdev, 5), + pci_resource_len(pdev, 5)); + if (mmio_base == NULL) { + rc = -ENOMEM; + goto err_out_free_ent; + } + base = (unsigned long) mmio_base; + + /* Clear a magic bit in SCR1 according to Darwin, those help + * some funky seagate drives (though so far, those were already + * set by the firmware on the machines I had access to + */ + writel(readl(mmio_base + K2_SATA_SICR1_OFFSET) & ~0x00040000, + mmio_base + K2_SATA_SICR1_OFFSET); + + /* Clear SATA error & interrupts we don't use */ + writel(0xffffffff, mmio_base + K2_SATA_SCR_ERROR_OFFSET); + writel(0x0, mmio_base + K2_SATA_SIM_OFFSET); + + probe_ent->sht = &k2_sata_sht; + probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_SATA_RESET | + ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO; + probe_ent->port_ops = &k2_sata_ops; + probe_ent->n_ports = 4; + probe_ent->irq = pdev->irq; + probe_ent->irq_flags = SA_SHIRQ; + probe_ent->mmio_base = mmio_base; + + /* We don't care much about the PIO/UDMA masks, but the core won't like us + * if we don't fill these + */ + probe_ent->pio_mask = 0x1f; + probe_ent->mwdma_mask = 0x7; + probe_ent->udma_mask = 0x7f; + + /* We have 4 ports per PCI function */ + k2_sata_setup_port(&probe_ent->port[0], base + 0 * K2_SATA_PORT_OFFSET); + k2_sata_setup_port(&probe_ent->port[1], base + 1 * K2_SATA_PORT_OFFSET); + k2_sata_setup_port(&probe_ent->port[2], base + 2 * K2_SATA_PORT_OFFSET); + k2_sata_setup_port(&probe_ent->port[3], base + 3 * K2_SATA_PORT_OFFSET); + + pci_set_master(pdev); + + /* FIXME: check ata_device_add return value */ + ata_device_add(probe_ent); + kfree(probe_ent); + + return 0; + +err_out_free_ent: + kfree(probe_ent); +err_out_regions: + pci_release_regions(pdev); +err_out: + if (!pci_dev_busy) + pci_disable_device(pdev); + return rc; +} + + +static struct pci_device_id k2_sata_pci_tbl[] = { + { 0x1166, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0x1166, 0x0241, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0x1166, 0x0242, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { } +}; + + +static struct pci_driver k2_sata_pci_driver = { + .name = DRV_NAME, + .id_table = k2_sata_pci_tbl, + .probe = k2_sata_init_one, + .remove = ata_pci_remove_one, +}; + + +static int __init k2_sata_init(void) +{ + return pci_module_init(&k2_sata_pci_driver); +} + + +static void __exit k2_sata_exit(void) +{ + pci_unregister_driver(&k2_sata_pci_driver); +} + + +MODULE_AUTHOR("Benjamin Herrenschmidt"); +MODULE_DESCRIPTION("low-level driver for K2 SATA controller"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, k2_sata_pci_tbl); +MODULE_VERSION(DRV_VERSION); + +module_init(k2_sata_init); +module_exit(k2_sata_exit); |