diff options
author | Michael Buesch <mb@bu3sch.de> | 2008-02-18 21:44:39 +0100 |
---|---|---|
committer | John W. Linville <linville@tuxdriver.com> | 2008-02-20 20:11:48 -0500 |
commit | 58ff70d4feae29cbb7ace410fa6585ef3afb44b6 (patch) | |
tree | 298ddfd64df8fbab670538202f93cf0bc028605a /drivers/ssb | |
parent | 04f93a87a2db84e7214a4ec56fccd2289e973ce5 (diff) | |
download | kernel_samsung_smdk4412-58ff70d4feae29cbb7ace410fa6585ef3afb44b6.zip kernel_samsung_smdk4412-58ff70d4feae29cbb7ace410fa6585ef3afb44b6.tar.gz kernel_samsung_smdk4412-58ff70d4feae29cbb7ace410fa6585ef3afb44b6.tar.bz2 |
ssb: Fix serial console on new bcm47xx devices
This fixes the baud settings for new devices
like the Linksys WRT350n.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/ssb')
-rw-r--r-- | drivers/ssb/driver_chipcommon.c | 36 |
1 files changed, 31 insertions, 5 deletions
diff --git a/drivers/ssb/driver_chipcommon.c b/drivers/ssb/driver_chipcommon.c index 6fbf1c5..7cc03f2 100644 --- a/drivers/ssb/driver_chipcommon.c +++ b/drivers/ssb/driver_chipcommon.c @@ -376,6 +376,7 @@ int ssb_chipco_serial_init(struct ssb_chipcommon *cc, unsigned int irq; u32 baud_base, div; u32 i, n; + unsigned int ccrev = cc->dev->id.revision; plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT); irq = ssb_mips_irq(cc->dev); @@ -387,14 +388,39 @@ int ssb_chipco_serial_init(struct ssb_chipcommon *cc, chipco_read32(cc, SSB_CHIPCO_CLOCK_M2)); div = 1; } else { - if (cc->dev->id.revision >= 11) { + if (ccrev == 20) { + /* BCM5354 uses constant 25MHz clock */ + baud_base = 25000000; + div = 48; + /* Set the override bit so we don't divide it */ + chipco_write32(cc, SSB_CHIPCO_CORECTL, + chipco_read32(cc, SSB_CHIPCO_CORECTL) + | SSB_CHIPCO_CORECTL_UARTCLK0); + } else if ((ccrev >= 11) && (ccrev != 15)) { /* Fixed ALP clock */ baud_base = 20000000; + if (cc->capabilities & SSB_CHIPCO_CAP_PMU) { + /* FIXME: baud_base is different for devices with a PMU */ + SSB_WARN_ON(1); + } div = 1; + if (ccrev >= 21) { + /* Turn off UART clock before switching clocksource. */ + chipco_write32(cc, SSB_CHIPCO_CORECTL, + chipco_read32(cc, SSB_CHIPCO_CORECTL) + & ~SSB_CHIPCO_CORECTL_UARTCLKEN); + } /* Set the override bit so we don't divide it */ chipco_write32(cc, SSB_CHIPCO_CORECTL, - SSB_CHIPCO_CORECTL_UARTCLK0); - } else if (cc->dev->id.revision >= 3) { + chipco_read32(cc, SSB_CHIPCO_CORECTL) + | SSB_CHIPCO_CORECTL_UARTCLK0); + if (ccrev >= 21) { + /* Re-enable the UART clock. */ + chipco_write32(cc, SSB_CHIPCO_CORECTL, + chipco_read32(cc, SSB_CHIPCO_CORECTL) + | SSB_CHIPCO_CORECTL_UARTCLKEN); + } + } else if (ccrev >= 3) { /* Internal backplane clock */ baud_base = ssb_clockspeed(bus); div = chipco_read32(cc, SSB_CHIPCO_CLKDIV) @@ -406,7 +432,7 @@ int ssb_chipco_serial_init(struct ssb_chipcommon *cc, } /* Clock source depends on strapping if UartClkOverride is unset */ - if ((cc->dev->id.revision > 0) && + if ((ccrev > 0) && !(chipco_read32(cc, SSB_CHIPCO_CORECTL) & SSB_CHIPCO_CORECTL_UARTCLK0)) { if ((cc->capabilities & SSB_CHIPCO_CAP_UARTCLK) == SSB_CHIPCO_CAP_UARTCLK_INT) { @@ -428,7 +454,7 @@ int ssb_chipco_serial_init(struct ssb_chipcommon *cc, cc_mmio = cc->dev->bus->mmio + (cc->dev->core_index * SSB_CORE_SIZE); uart_regs = cc_mmio + SSB_CHIPCO_UART0_DATA; /* Offset changed at after rev 0 */ - if (cc->dev->id.revision == 0) + if (ccrev == 0) uart_regs += (i * 8); else uart_regs += (i * 256); |