staging: rtl8192e: Pass r8192e_priv to phy functions

Phy functions shouldn't be associated with net_device.

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

6 files changed, 256 insertions, 283 deletions

diff --git a/drivers/staging/rtl8192e/r8190_rtl8256.c b/drivers/staging/rtl8192e/r8190_rtl8256.c
index b4d45d6..3cf96aa 100644
--- a/drivers/staging/rtl8192e/r8190_rtl8256.c
+++ b/drivers/staging/rtl8192e/r8190_rtl8256.c
@@ -23,15 +23,14 @@
  * Return:      NONE
  * Note:	8226 support both 20M  and 40 MHz
  *---------------------------------------------------------------------------*/
-void PHY_SetRF8256Bandwidth(struct net_device* dev , HT_CHANNEL_WIDTH Bandwidth)	//20M or 40M
+void PHY_SetRF8256Bandwidth(struct r8192_priv *priv, HT_CHANNEL_WIDTH Bandwidth)	//20M or 40M
 {
 	u8	eRFPath;
-	struct r8192_priv *priv = ieee80211_priv(dev);
 
 	//for(eRFPath = RF90_PATH_A; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
 	for(eRFPath = 0; eRFPath <priv->NumTotalRFPath; eRFPath++)
 	{
-		if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath))
+		if (!rtl8192_phy_CheckIsLegalRFPath(priv, eRFPath))
 				continue;
 
 		switch(Bandwidth)
@@ -39,9 +38,9 @@ void PHY_SetRF8256Bandwidth(struct net_device* dev , HT_CHANNEL_WIDTH Bandwidth)
 			case HT_CHANNEL_WIDTH_20:
 				if(priv->card_8192_version == VERSION_8190_BD || priv->card_8192_version == VERSION_8190_BE)// 8256 D-cut, E-cut, xiong: consider it later!
 				{
-					rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x0b, bMask12Bits, 0x100); //phy para:1ba
-					rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x2c, bMask12Bits, 0x3d7);
-					rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x0e, bMask12Bits, 0x021);
+					rtl8192_phy_SetRFReg(priv, (RF90_RADIO_PATH_E)eRFPath, 0x0b, bMask12Bits, 0x100); //phy para:1ba
+					rtl8192_phy_SetRFReg(priv, (RF90_RADIO_PATH_E)eRFPath, 0x2c, bMask12Bits, 0x3d7);
+					rtl8192_phy_SetRFReg(priv, (RF90_RADIO_PATH_E)eRFPath, 0x0e, bMask12Bits, 0x021);
 
 					//cosa add for sd3's request 01/23/2008
 					//rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x14, bMask12Bits, 0x5ab);
@@ -55,9 +54,9 @@ void PHY_SetRF8256Bandwidth(struct net_device* dev , HT_CHANNEL_WIDTH Bandwidth)
 			case HT_CHANNEL_WIDTH_20_40:
 				if(priv->card_8192_version == VERSION_8190_BD ||priv->card_8192_version == VERSION_8190_BE)// 8256 D-cut, E-cut, xiong: consider it later!
 				{
-					rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x0b, bMask12Bits, 0x300); //phy para:3ba
-					rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x2c, bMask12Bits, 0x3ff);
-					rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x0e, bMask12Bits, 0x0e1);
+					rtl8192_phy_SetRFReg(priv, (RF90_RADIO_PATH_E)eRFPath, 0x0b, bMask12Bits, 0x300); //phy para:3ba
+					rtl8192_phy_SetRFReg(priv, (RF90_RADIO_PATH_E)eRFPath, 0x2c, bMask12Bits, 0x3ff);
+					rtl8192_phy_SetRFReg(priv, (RF90_RADIO_PATH_E)eRFPath, 0x0e, bMask12Bits, 0x0e1);
 
 				}
 				else
@@ -80,43 +79,43 @@ void PHY_SetRF8256Bandwidth(struct net_device* dev , HT_CHANNEL_WIDTH Bandwidth)
  * Output:      NONE
  * Return:      NONE
  *---------------------------------------------------------------------------*/
-RT_STATUS PHY_RF8256_Config(struct net_device* dev)
+RT_STATUS PHY_RF8256_Config(struct r8192_priv *priv)
 {
-	struct r8192_priv *priv = ieee80211_priv(dev);
 	// Initialize general global value
 	//
 	RT_STATUS rtStatus = RT_STATUS_SUCCESS;
 	// TODO: Extend RF_PATH_C and RF_PATH_D in the future
 	priv->NumTotalRFPath = RTL819X_TOTAL_RF_PATH;
 	// Config BB and RF
-	rtStatus = phy_RF8256_Config_ParaFile(dev);
+	rtStatus = phy_RF8256_Config_ParaFile(priv);
 
 	return rtStatus;
 }
+
 /*--------------------------------------------------------------------------
  * Overview:    Interface to config 8256
  * Input:       struct net_device*	dev
  * Output:      NONE
  * Return:      NONE
  *---------------------------------------------------------------------------*/
-RT_STATUS phy_RF8256_Config_ParaFile(struct net_device* dev)
+RT_STATUS phy_RF8256_Config_ParaFile(struct r8192_priv *priv)
 {
 	u32 	u4RegValue = 0;
 	u8 	eRFPath;
 	RT_STATUS				rtStatus = RT_STATUS_SUCCESS;
 	BB_REGISTER_DEFINITION_T	*pPhyReg;
-	struct r8192_priv *priv = ieee80211_priv(dev);
 	u32	RegOffSetToBeCheck = 0x3;
 	u32 	RegValueToBeCheck = 0x7f1;
 	u32	RF3_Final_Value = 0;
 	u8	ConstRetryTimes = 5, RetryTimes = 5;
 	u8 ret = 0;
+
 	//3//-----------------------------------------------------------------
 	//3// <2> Initialize RF
 	//3//-----------------------------------------------------------------
 	for(eRFPath = (RF90_RADIO_PATH_E)RF90_PATH_A; eRFPath <priv->NumTotalRFPath; eRFPath++)
 	{
-		if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath))
+		if (!rtl8192_phy_CheckIsLegalRFPath(priv, eRFPath))
 				continue;
 
 		pPhyReg = &priv->PHYRegDef[eRFPath];
@@ -126,29 +125,29 @@ RT_STATUS phy_RF8256_Config_ParaFile(struct net_device* dev)
 		{
 		case RF90_PATH_A:
 		case RF90_PATH_C:
-			u4RegValue = rtl8192_QueryBBReg(dev, pPhyReg->rfintfs, bRFSI_RFENV);
+			u4RegValue = rtl8192_QueryBBReg(priv, pPhyReg->rfintfs, bRFSI_RFENV);
 			break;
 		case RF90_PATH_B :
 		case RF90_PATH_D:
-			u4RegValue = rtl8192_QueryBBReg(dev, pPhyReg->rfintfs, bRFSI_RFENV<<16);
+			u4RegValue = rtl8192_QueryBBReg(priv, pPhyReg->rfintfs, bRFSI_RFENV<<16);
 			break;
 		}
 
 		/*----Set RF_ENV enable----*/
-		rtl8192_setBBreg(dev, pPhyReg->rfintfe, bRFSI_RFENV<<16, 0x1);
+		rtl8192_setBBreg(priv, pPhyReg->rfintfe, bRFSI_RFENV<<16, 0x1);
 
 		/*----Set RF_ENV output high----*/
-		rtl8192_setBBreg(dev, pPhyReg->rfintfo, bRFSI_RFENV, 0x1);
+		rtl8192_setBBreg(priv, pPhyReg->rfintfo, bRFSI_RFENV, 0x1);
 
 		/* Set bit number of Address and Data for RF register */
-		rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, b3WireAddressLength, 0x0); 	// Set 0 to 4 bits for Z-serial and set 1 to 6 bits for 8258
-		rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, b3WireDataLength, 0x0);	// Set 0 to 12 bits for Z-serial and 8258, and set 1 to 14 bits for ???
+		rtl8192_setBBreg(priv, pPhyReg->rfHSSIPara2, b3WireAddressLength, 0x0); 	// Set 0 to 4 bits for Z-serial and set 1 to 6 bits for 8258
+		rtl8192_setBBreg(priv, pPhyReg->rfHSSIPara2, b3WireDataLength, 0x0);	// Set 0 to 12 bits for Z-serial and 8258, and set 1 to 14 bits for ???
 
-		rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E) eRFPath, 0x0, bMask12Bits, 0xbf);
+		rtl8192_phy_SetRFReg(priv, (RF90_RADIO_PATH_E) eRFPath, 0x0, bMask12Bits, 0xbf);
 
 		/*----Check RF block (for FPGA platform only)----*/
 		// TODO: this function should be removed on ASIC , Emily 2007.2.2
-		rtStatus = rtl8192_phy_checkBBAndRF(dev, HW90_BLOCK_RF, (RF90_RADIO_PATH_E)eRFPath);
+		rtStatus = rtl8192_phy_checkBBAndRF(priv, HW90_BLOCK_RF, (RF90_RADIO_PATH_E)eRFPath);
 		if(rtStatus!= RT_STATUS_SUCCESS)
 		{
 			RT_TRACE(COMP_ERR, "PHY_RF8256_Config():Check Radio[%d] Fail!!\n", eRFPath);
@@ -163,8 +162,8 @@ RT_STATUS phy_RF8256_Config_ParaFile(struct net_device* dev)
 		case RF90_PATH_A:
 			while(RF3_Final_Value!=RegValueToBeCheck && RetryTimes!=0)
 			{
-				ret = rtl8192_phy_ConfigRFWithHeaderFile(dev,(RF90_RADIO_PATH_E)eRFPath);
-				RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
+				ret = rtl8192_phy_ConfigRFWithHeaderFile(priv,(RF90_RADIO_PATH_E)eRFPath);
+				RF3_Final_Value = rtl8192_phy_QueryRFReg(priv, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
 				RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value);
 				RetryTimes--;
 			}
@@ -172,8 +171,8 @@ RT_STATUS phy_RF8256_Config_ParaFile(struct net_device* dev)
 		case RF90_PATH_B:
 			while(RF3_Final_Value!=RegValueToBeCheck && RetryTimes!=0)
 			{
-				ret = rtl8192_phy_ConfigRFWithHeaderFile(dev,(RF90_RADIO_PATH_E)eRFPath);
-				RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
+				ret = rtl8192_phy_ConfigRFWithHeaderFile(priv,(RF90_RADIO_PATH_E)eRFPath);
+				RF3_Final_Value = rtl8192_phy_QueryRFReg(priv, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
 				RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value);
 				RetryTimes--;
 			}
@@ -181,8 +180,8 @@ RT_STATUS phy_RF8256_Config_ParaFile(struct net_device* dev)
 		case RF90_PATH_C:
 			while(RF3_Final_Value!=RegValueToBeCheck && RetryTimes!=0)
 			{
-				ret = rtl8192_phy_ConfigRFWithHeaderFile(dev,(RF90_RADIO_PATH_E)eRFPath);
-				RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
+				ret = rtl8192_phy_ConfigRFWithHeaderFile(priv,(RF90_RADIO_PATH_E)eRFPath);
+				RF3_Final_Value = rtl8192_phy_QueryRFReg(priv, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
 				RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value);
 				RetryTimes--;
 			}
@@ -190,8 +189,8 @@ RT_STATUS phy_RF8256_Config_ParaFile(struct net_device* dev)
 		case RF90_PATH_D:
 			while(RF3_Final_Value!=RegValueToBeCheck && RetryTimes!=0)
 			{
-				ret = rtl8192_phy_ConfigRFWithHeaderFile(dev,(RF90_RADIO_PATH_E)eRFPath);
-				RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
+				ret = rtl8192_phy_ConfigRFWithHeaderFile(priv,(RF90_RADIO_PATH_E)eRFPath);
+				RF3_Final_Value = rtl8192_phy_QueryRFReg(priv, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
 				RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value);
 				RetryTimes--;
 			}
@@ -203,11 +202,11 @@ RT_STATUS phy_RF8256_Config_ParaFile(struct net_device* dev)
 		{
 		case RF90_PATH_A:
 		case RF90_PATH_C:
-			rtl8192_setBBreg(dev, pPhyReg->rfintfs, bRFSI_RFENV, u4RegValue);
+			rtl8192_setBBreg(priv, pPhyReg->rfintfs, bRFSI_RFENV, u4RegValue);
 			break;
 		case RF90_PATH_B :
 		case RF90_PATH_D:
-			rtl8192_setBBreg(dev, pPhyReg->rfintfs, bRFSI_RFENV<<16, u4RegValue);
+			rtl8192_setBBreg(priv, pPhyReg->rfintfs, bRFSI_RFENV<<16, u4RegValue);
 			break;
 		}
 
@@ -227,10 +226,9 @@ phy_RF8256_Config_ParaFile_Fail:
 }
 
 
-void PHY_SetRF8256CCKTxPower(struct net_device*	dev, u8	powerlevel)
+void PHY_SetRF8256CCKTxPower(struct r8192_priv *priv, u8 powerlevel)
 {
 	u32	TxAGC=0;
-	struct r8192_priv *priv = ieee80211_priv(dev);
 
 	TxAGC = powerlevel;
 	if(priv->bDynamicTxLowPower == true)//cosa 04282008 for cck long range
@@ -242,13 +240,12 @@ void PHY_SetRF8256CCKTxPower(struct net_device*	dev, u8	powerlevel)
 	}
 	if(TxAGC > 0x24)
 		TxAGC = 0x24;
-	rtl8192_setBBreg(dev, rTxAGC_CCK_Mcs32, bTxAGCRateCCK, TxAGC);
+	rtl8192_setBBreg(priv, rTxAGC_CCK_Mcs32, bTxAGCRateCCK, TxAGC);
 }
 
 
-void PHY_SetRF8256OFDMTxPower(struct net_device* dev, u8 powerlevel)
+void PHY_SetRF8256OFDMTxPower(struct r8192_priv *priv, u8 powerlevel)
 {
-	struct r8192_priv *priv = ieee80211_priv(dev);
 
 	u32 writeVal, powerBase0, powerBase1, writeVal_tmp;
 	u8 index = 0;
@@ -290,7 +287,7 @@ void PHY_SetRF8256OFDMTxPower(struct net_device* dev, u8 powerlevel)
 		{
 			writeVal = (byte3<<24) | (byte2<<16) |(byte1<<8) |byte0;
 		}
-		rtl8192_setBBreg(dev, RegOffset[index], 0x7f7f7f7f, writeVal);
+		rtl8192_setBBreg(priv, RegOffset[index], 0x7f7f7f7f, writeVal);
 	}
 }
 
@@ -356,22 +353,22 @@ SetRFPowerState8190(struct net_device *dev, RT_RF_POWER_STATE eRFPowerState)
 			write_nic_byte(priv, ANAPAR, 0x37);//160MHz
 			mdelay(1);
 			//enable clock 80/88 MHz
-			rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x4, 0x1); // 0x880[2]
+			rtl8192_setBBreg(priv, rFPGA0_AnalogParameter1, 0x4, 0x1); // 0x880[2]
 			priv->bHwRfOffAction = 0;
 
 			//RF-A, RF-B
 			//enable RF-Chip A/B
-			rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, 0x1);		// 0x860[4]
+			rtl8192_setBBreg(priv, rFPGA0_XA_RFInterfaceOE, BIT4, 0x1);		// 0x860[4]
 			//analog to digital on
-			rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0x300, 0x3);// 0x88c[9:8]
+			rtl8192_setBBreg(priv, rFPGA0_AnalogParameter4, 0x300, 0x3);// 0x88c[9:8]
 			//digital to analog on
-			rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x18, 0x3); // 0x880[4:3]
+			rtl8192_setBBreg(priv, rFPGA0_AnalogParameter1, 0x18, 0x3); // 0x880[4:3]
 			//rx antenna on
-			rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0x3, 0x3);// 0xc04[1:0]
+			rtl8192_setBBreg(priv, rOFDM0_TRxPathEnable, 0x3, 0x3);// 0xc04[1:0]
 			//rx antenna on
-			rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0x3, 0x3);// 0xd04[1:0]
+			rtl8192_setBBreg(priv, rOFDM1_TRxPathEnable, 0x3, 0x3);// 0xd04[1:0]
 			//analog to digital part2 on
-			rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x60, 0x3); 	// 0x880[6:5]
+			rtl8192_setBBreg(priv, rFPGA0_AnalogParameter1, 0x60, 0x3); 	// 0x880[6:5]
 
 		}
 
diff --git a/drivers/staging/rtl8192e/r8190_rtl8256.h b/drivers/staging/rtl8192e/r8190_rtl8256.h
index d9347fa..e3297ec 100644
--- a/drivers/staging/rtl8192e/r8190_rtl8256.h
+++ b/drivers/staging/rtl8192e/r8190_rtl8256.h
@@ -12,15 +12,15 @@
 
 #define RTL819X_TOTAL_RF_PATH 2 /* for 8192E */
 
-void PHY_SetRF8256Bandwidth(struct net_device *dev,
+void PHY_SetRF8256Bandwidth(struct r8192_priv *priv,
 				   HT_CHANNEL_WIDTH Bandwidth);
 
-RT_STATUS PHY_RF8256_Config(struct net_device *dev);
+RT_STATUS PHY_RF8256_Config(struct r8192_priv *priv);
 
-RT_STATUS phy_RF8256_Config_ParaFile(struct net_device *dev);
+RT_STATUS phy_RF8256_Config_ParaFile(struct r8192_priv *priv);
 
-void PHY_SetRF8256CCKTxPower(struct net_device *dev, u8 powerlevel);
-void PHY_SetRF8256OFDMTxPower(struct net_device *dev, u8 powerlevel);
+void PHY_SetRF8256CCKTxPower(struct r8192_priv *priv, u8 powerlevel);
+void PHY_SetRF8256OFDMTxPower(struct r8192_priv *priv, u8 powerlevel);
 
 bool MgntActSet_RF_State(struct net_device *dev,
 				RT_RF_POWER_STATE StateToSet,
diff --git a/drivers/staging/rtl8192e/r8192E_core.c b/drivers/staging/rtl8192e/r8192E_core.c
index 9500898..50480ac 100644
--- a/drivers/staging/rtl8192e/r8192E_core.c
+++ b/drivers/staging/rtl8192e/r8192E_core.c
@@ -752,18 +752,18 @@ void PHY_SetRtl8192eRfOff(struct net_device* dev)
 	struct r8192_priv *priv = ieee80211_priv(dev);
 
 	//disable RF-Chip A/B
-	rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, 0x0);
+	rtl8192_setBBreg(priv, rFPGA0_XA_RFInterfaceOE, BIT4, 0x0);
 	//analog to digital off, for power save
-	rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0x300, 0x0);
+	rtl8192_setBBreg(priv, rFPGA0_AnalogParameter4, 0x300, 0x0);
 	//digital to analog off, for power save
-	rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x18, 0x0);
+	rtl8192_setBBreg(priv, rFPGA0_AnalogParameter1, 0x18, 0x0);
 	//rx antenna off
-	rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0xf, 0x0);
+	rtl8192_setBBreg(priv, rOFDM0_TRxPathEnable, 0xf, 0x0);
 	//rx antenna off
-	rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0xf, 0x0);
+	rtl8192_setBBreg(priv, rOFDM1_TRxPathEnable, 0xf, 0x0);
 	//analog to digital part2 off, for power save
-	rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x60, 0x0);
-	rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x4, 0x0);
+	rtl8192_setBBreg(priv, rFPGA0_AnalogParameter1, 0x60, 0x0);
+	rtl8192_setBBreg(priv, rFPGA0_AnalogParameter1, 0x4, 0x0);
 	// Analog parameter!!Change bias and Lbus control.
 	write_nic_byte(priv, ANAPAR_FOR_8192PciE, 0x07);
 
@@ -2659,7 +2659,7 @@ static RT_STATUS rtl8192_adapter_start(struct net_device *dev)
 	//3// Initialize BB before MAC
 	//3//
 	RT_TRACE(COMP_INIT, "BB Config Start!\n");
-	rtStatus = rtl8192_BBConfig(dev);
+	rtStatus = rtl8192_BBConfig(priv);
 	if(rtStatus != RT_STATUS_SUCCESS)
 	{
 		RT_TRACE(COMP_ERR, "BB Config failed\n");
@@ -2768,11 +2768,11 @@ static RT_STATUS rtl8192_adapter_start(struct net_device *dev)
 	//2=======================================================
 	// Set PHY related configuration defined in MAC register bank
 	//2=======================================================
-	rtl8192_phy_configmac(dev);
+	rtl8192_phy_configmac(priv);
 
 	if (priv->card_8192_version > (u8) VERSION_8190_BD) {
-		rtl8192_phy_getTxPower(dev);
-		rtl8192_phy_setTxPower(dev, priv->chan);
+		rtl8192_phy_getTxPower(priv);
+		rtl8192_phy_setTxPower(priv, priv->chan);
 	}
 
 	//if D or C cut
@@ -2811,7 +2811,7 @@ static RT_STATUS rtl8192_adapter_start(struct net_device *dev)
 	if(priv->ResetProgress == RESET_TYPE_NORESET)
 	{
 	RT_TRACE(COMP_INIT, "RF Config Started!\n");
-	rtStatus = rtl8192_phy_RFConfig(dev);
+	rtStatus = rtl8192_phy_RFConfig(priv);
 	if(rtStatus != RT_STATUS_SUCCESS)
 	{
 		RT_TRACE(COMP_ERR, "RF Config failed\n");
@@ -2819,11 +2819,11 @@ static RT_STATUS rtl8192_adapter_start(struct net_device *dev)
 	}
 	RT_TRACE(COMP_INIT, "RF Config Finished!\n");
 	}
-	rtl8192_phy_updateInitGain(dev);
+	rtl8192_phy_updateInitGain(priv);
 
 	/*---- Set CCK and OFDM Block "ON"----*/
-	rtl8192_setBBreg(dev, rFPGA0_RFMOD, bCCKEn, 0x1);
-	rtl8192_setBBreg(dev, rFPGA0_RFMOD, bOFDMEn, 0x1);
+	rtl8192_setBBreg(priv, rFPGA0_RFMOD, bCCKEn, 0x1);
+	rtl8192_setBBreg(priv, rFPGA0_RFMOD, bOFDMEn, 0x1);
 
 	//Enable Led
 	write_nic_byte(priv, 0x87, 0x0);
@@ -2864,8 +2864,8 @@ static RT_STATUS rtl8192_adapter_start(struct net_device *dev)
 
 		if(priv->IC_Cut >= IC_VersionCut_D)
 		{
-			tmpRegA= rtl8192_QueryBBReg(dev,rOFDM0_XATxIQImbalance,bMaskDWord);
-			tmpRegC= rtl8192_QueryBBReg(dev,rOFDM0_XCTxIQImbalance,bMaskDWord);
+			tmpRegA = rtl8192_QueryBBReg(priv, rOFDM0_XATxIQImbalance, bMaskDWord);
+			tmpRegC = rtl8192_QueryBBReg(priv, rOFDM0_XCTxIQImbalance, bMaskDWord);
 			for(i = 0; i<TxBBGainTableLength; i++)
 			{
 				if(tmpRegA == priv->txbbgain_table[i].txbbgain_value)
@@ -2877,7 +2877,7 @@ static RT_STATUS rtl8192_adapter_start(struct net_device *dev)
 				}
 			}
 
-		TempCCk = rtl8192_QueryBBReg(dev, rCCK0_TxFilter1, bMaskByte2);
+		TempCCk = rtl8192_QueryBBReg(priv, rCCK0_TxFilter1, bMaskByte2);
 
 		for(i=0 ; i<CCKTxBBGainTableLength ; i++)
 		{
@@ -3873,7 +3873,7 @@ static void rtl8192_process_phyinfo(struct r8192_priv * priv, u8* buffer,struct
 	{
 		for (rfpath = RF90_PATH_A; rfpath < RF90_PATH_C; rfpath++)
 		{
-			if (!rtl8192_phy_CheckIsLegalRFPath(priv->ieee80211->dev, rfpath))
+			if (!rtl8192_phy_CheckIsLegalRFPath(priv, rfpath))
 				continue;
 			RT_TRACE(COMP_DBG, "pPreviousstats->RxMIMOSignalStrength[rfpath] = %d\n", pprevious_stats->RxMIMOSignalStrength[rfpath]);
 			//Fixed by Jacken 2008-03-20
@@ -4125,7 +4125,7 @@ static void rtl8192_query_rxphystatus(
 	/*2007.08.30 requested by SD3 Jerry */
 	if (priv->phy_check_reg824 == 0)
 	{
-		priv->phy_reg824_bit9 = rtl8192_QueryBBReg(priv->ieee80211->dev, rFPGA0_XA_HSSIParameter2, 0x200);
+		priv->phy_reg824_bit9 = rtl8192_QueryBBReg(priv, rFPGA0_XA_HSSIParameter2, 0x200);
 		priv->phy_check_reg824 = 1;
 	}
 
diff --git a/drivers/staging/rtl8192e/r8192E_dm.c b/drivers/staging/rtl8192e/r8192E_dm.c
index 330e9d9..22bcc92 100644
--- a/drivers/staging/rtl8192e/r8192E_dm.c
+++ b/drivers/staging/rtl8192e/r8192E_dm.c
@@ -586,20 +586,20 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device * dev)
 					if(priv->rfa_txpowertrackingindex_real > 4)
 					{
 						priv->rfa_txpowertrackingindex_real--;
-						rtl8192_setBBreg(dev, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfa_txpowertrackingindex_real].txbbgain_value);
+						rtl8192_setBBreg(priv, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfa_txpowertrackingindex_real].txbbgain_value);
 					}
 
 					priv->rfc_txpowertrackingindex--;
 					if(priv->rfc_txpowertrackingindex_real > 4)
 					{
 						priv->rfc_txpowertrackingindex_real--;
-						rtl8192_setBBreg(dev, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfc_txpowertrackingindex_real].txbbgain_value);
+						rtl8192_setBBreg(priv, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfc_txpowertrackingindex_real].txbbgain_value);
 					}
 						}
 						else
 						{
-								rtl8192_setBBreg(dev, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[4].txbbgain_value);
-								rtl8192_setBBreg(dev, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[4].txbbgain_value);
+								rtl8192_setBBreg(priv, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[4].txbbgain_value);
+								rtl8192_setBBreg(priv, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[4].txbbgain_value);
 				}
 			}
 			else
@@ -610,11 +610,11 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device * dev)
 							if(priv->rfc_txpowertrackingindex_real > 4)
 							{
 								priv->rfc_txpowertrackingindex_real--;
-								rtl8192_setBBreg(dev, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfc_txpowertrackingindex_real].txbbgain_value);
+								rtl8192_setBBreg(priv, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfc_txpowertrackingindex_real].txbbgain_value);
 							}
 						}
 						else
-							rtl8192_setBBreg(dev, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[4].txbbgain_value);
+							rtl8192_setBBreg(priv, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[4].txbbgain_value);
 				}
 			}
 			else
@@ -625,15 +625,15 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device * dev)
 				{
 					priv->rfa_txpowertrackingindex++;
 					priv->rfa_txpowertrackingindex_real++;
-					rtl8192_setBBreg(dev, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfa_txpowertrackingindex_real].txbbgain_value);
+					rtl8192_setBBreg(priv, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfa_txpowertrackingindex_real].txbbgain_value);
 					priv->rfc_txpowertrackingindex++;
 					priv->rfc_txpowertrackingindex_real++;
-					rtl8192_setBBreg(dev, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfc_txpowertrackingindex_real].txbbgain_value);
+					rtl8192_setBBreg(priv, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfc_txpowertrackingindex_real].txbbgain_value);
 				}
 					else
 					{
-						rtl8192_setBBreg(dev, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[TxBBGainTableLength - 1].txbbgain_value);
-						rtl8192_setBBreg(dev, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[TxBBGainTableLength - 1].txbbgain_value);
+						rtl8192_setBBreg(priv, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[TxBBGainTableLength - 1].txbbgain_value);
+						rtl8192_setBBreg(priv, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[TxBBGainTableLength - 1].txbbgain_value);
 			}
 				}
 				else
@@ -642,10 +642,10 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device * dev)
 					{
 							priv->rfc_txpowertrackingindex++;
 							priv->rfc_txpowertrackingindex_real++;
-							rtl8192_setBBreg(dev, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfc_txpowertrackingindex_real].txbbgain_value);
+							rtl8192_setBBreg(priv, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfc_txpowertrackingindex_real].txbbgain_value);
 					}
 					else
-							rtl8192_setBBreg(dev, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[TxBBGainTableLength - 1].txbbgain_value);
+							rtl8192_setBBreg(priv, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[TxBBGainTableLength - 1].txbbgain_value);
 				}
 			}
 			if (RF_Type == RF_2T4R)
@@ -721,7 +721,7 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device * dev)
 	if(!priv->btxpower_trackingInit)
 	{
 		//Query OFDM default setting
-		tmpRegA= rtl8192_QueryBBReg(dev, rOFDM0_XATxIQImbalance, bMaskDWord);
+		tmpRegA = rtl8192_QueryBBReg(priv, rOFDM0_XATxIQImbalance, bMaskDWord);
 		for(i=0; i<OFDM_Table_Length; i++)	//find the index
 		{
 			if(tmpRegA == OFDMSwingTable[i])
@@ -733,7 +733,7 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device * dev)
 		}
 
 		//Query CCK default setting From 0xa22
-		TempCCk = rtl8192_QueryBBReg(dev, rCCK0_TxFilter1, bMaskByte2);
+		TempCCk = rtl8192_QueryBBReg(priv, rCCK0_TxFilter1, bMaskByte2);
 		for(i=0 ; i<CCK_Table_length ; i++)
 		{
 			if(TempCCk == (u32)CCKSwingTable_Ch1_Ch13[i][0])
@@ -750,7 +750,7 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device * dev)
 	}
 
 	// read and filter out unreasonable value
-	tmpRegA = rtl8192_phy_QueryRFReg(dev, RF90_PATH_A, 0x12, 0x078);	// 0x12: RF Reg[10:7]
+	tmpRegA = rtl8192_phy_QueryRFReg(priv, RF90_PATH_A, 0x12, 0x078);	// 0x12: RF Reg[10:7]
 	RT_TRACE(COMP_POWER_TRACKING, "Readback ThermalMeterA = %d\n", tmpRegA);
 	if(tmpRegA < 3 || tmpRegA > 13)
 		return;
@@ -817,7 +817,7 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device * dev)
 	if(priv->OFDM_index != tmpOFDMindex)
 	{
 		priv->OFDM_index = tmpOFDMindex;
-		rtl8192_setBBreg(dev, rOFDM0_XATxIQImbalance, bMaskDWord, OFDMSwingTable[priv->OFDM_index]);
+		rtl8192_setBBreg(priv, rOFDM0_XATxIQImbalance, bMaskDWord, OFDMSwingTable[priv->OFDM_index]);
 		RT_TRACE(COMP_POWER_TRACKING, "Update OFDMSwing[%d] = 0x%x\n",
 			priv->OFDM_index, OFDMSwingTable[priv->OFDM_index]);
 	}
@@ -1014,10 +1014,10 @@ static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev)
 	{
 		//Attention!! You have to wirte all 12bits data to RF, or it may cause RF to crash
 		//actually write reg0x02 bit1=0, then bit1=1.
-		rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4d);
-		rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4f);
-		rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4d);
-		rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4f);
+		rtl8192_phy_SetRFReg(priv, RF90_PATH_A, 0x02, bMask12Bits, 0x4d);
+		rtl8192_phy_SetRFReg(priv, RF90_PATH_A, 0x02, bMask12Bits, 0x4f);
+		rtl8192_phy_SetRFReg(priv, RF90_PATH_A, 0x02, bMask12Bits, 0x4d);
+		rtl8192_phy_SetRFReg(priv, RF90_PATH_A, 0x02, bMask12Bits, 0x4f);
 		TM_Trigger = 1;
 		return;
 	}
@@ -1049,40 +1049,40 @@ static void dm_CCKTxPowerAdjust_TSSI(struct net_device *dev, bool  bInCH14)
 		TempVal = 	(u32)(priv->cck_txbbgain_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[0] +
 					(priv->cck_txbbgain_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[1]<<8)) ;
 
-		rtl8192_setBBreg(dev, rCCK0_TxFilter1,bMaskHWord, TempVal);
+		rtl8192_setBBreg(priv, rCCK0_TxFilter1, bMaskHWord, TempVal);
 		//Write 0xa24 ~ 0xa27
 		TempVal = 0;
 		TempVal = 	(u32)(priv->cck_txbbgain_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[2] +
 					(priv->cck_txbbgain_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[3]<<8) +
 					(priv->cck_txbbgain_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[4]<<16 )+
 					(priv->cck_txbbgain_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[5]<<24));
-		rtl8192_setBBreg(dev, rCCK0_TxFilter2,bMaskDWord, TempVal);
+		rtl8192_setBBreg(priv, rCCK0_TxFilter2, bMaskDWord, TempVal);
 		//Write 0xa28  0xa29
 		TempVal = 0;
 		TempVal = 	(u32)(priv->cck_txbbgain_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[6] +
 					(priv->cck_txbbgain_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[7]<<8)) ;
 
-		rtl8192_setBBreg(dev, rCCK0_DebugPort,bMaskLWord, TempVal);
+		rtl8192_setBBreg(priv, rCCK0_DebugPort, bMaskLWord, TempVal);
 	}
 	else
 	{
 		TempVal = 	(u32)(priv->cck_txbbgain_ch14_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[0] +
 					(priv->cck_txbbgain_ch14_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[1]<<8)) ;
 
-		rtl8192_setBBreg(dev, rCCK0_TxFilter1,bMaskHWord, TempVal);
+		rtl8192_setBBreg(priv, rCCK0_TxFilter1, bMaskHWord, TempVal);
 		//Write 0xa24 ~ 0xa27
 		TempVal = 0;
 		TempVal = 	(u32)(priv->cck_txbbgain_ch14_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[2] +
 					(priv->cck_txbbgain_ch14_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[3]<<8) +
 					(priv->cck_txbbgain_ch14_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[4]<<16 )+
 					(priv->cck_txbbgain_ch14_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[5]<<24));
-		rtl8192_setBBreg(dev, rCCK0_TxFilter2,bMaskDWord, TempVal);
+		rtl8192_setBBreg(priv, rCCK0_TxFilter2, bMaskDWord, TempVal);
 		//Write 0xa28  0xa29
 		TempVal = 0;
 		TempVal = 	(u32)(priv->cck_txbbgain_ch14_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[6] +
 					(priv->cck_txbbgain_ch14_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[7]<<8)) ;
 
-		rtl8192_setBBreg(dev, rCCK0_DebugPort,bMaskLWord, TempVal);
+		rtl8192_setBBreg(priv, rCCK0_DebugPort, bMaskLWord, TempVal);
 	}
 
 
@@ -1099,7 +1099,7 @@ static void dm_CCKTxPowerAdjust_ThermalMeter(struct net_device *dev,	bool  bInCH
 		//Write 0xa22 0xa23
 		TempVal = 	CCKSwingTable_Ch1_Ch13[priv->CCK_index][0] +
 					(CCKSwingTable_Ch1_Ch13[priv->CCK_index][1]<<8) ;
-		rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskHWord, TempVal);
+		rtl8192_setBBreg(priv, rCCK0_TxFilter1, bMaskHWord, TempVal);
 		RT_TRACE(COMP_POWER_TRACKING, "CCK not chnl 14, reg 0x%x = 0x%x\n",
 			rCCK0_TxFilter1, TempVal);
 		//Write 0xa24 ~ 0xa27
@@ -1108,7 +1108,7 @@ static void dm_CCKTxPowerAdjust_ThermalMeter(struct net_device *dev,	bool  bInCH
 					(CCKSwingTable_Ch1_Ch13[priv->CCK_index][3]<<8) +
 					(CCKSwingTable_Ch1_Ch13[priv->CCK_index][4]<<16 )+
 					(CCKSwingTable_Ch1_Ch13[priv->CCK_index][5]<<24);
-		rtl8192_setBBreg(dev, rCCK0_TxFilter2, bMaskDWord, TempVal);
+		rtl8192_setBBreg(priv, rCCK0_TxFilter2, bMaskDWord, TempVal);
 		RT_TRACE(COMP_POWER_TRACKING, "CCK not chnl 14, reg 0x%x = 0x%x\n",
 			rCCK0_TxFilter2, TempVal);
 		//Write 0xa28  0xa29
@@ -1116,7 +1116,7 @@ static void dm_CCKTxPowerAdjust_ThermalMeter(struct net_device *dev,	bool  bInCH
 		TempVal = 	CCKSwingTable_Ch1_Ch13[priv->CCK_index][6] +
 					(CCKSwingTable_Ch1_Ch13[priv->CCK_index][7]<<8) ;
 
-		rtl8192_setBBreg(dev, rCCK0_DebugPort, bMaskLWord, TempVal);
+		rtl8192_setBBreg(priv, rCCK0_DebugPort, bMaskLWord, TempVal);
 		RT_TRACE(COMP_POWER_TRACKING, "CCK not chnl 14, reg 0x%x = 0x%x\n",
 			rCCK0_DebugPort, TempVal);
 	}
@@ -1127,7 +1127,7 @@ static void dm_CCKTxPowerAdjust_ThermalMeter(struct net_device *dev,	bool  bInCH
 		TempVal = 	CCKSwingTable_Ch14[priv->CCK_index][0] +
 					(CCKSwingTable_Ch14[priv->CCK_index][1]<<8) ;
 
-		rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskHWord, TempVal);
+		rtl8192_setBBreg(priv, rCCK0_TxFilter1, bMaskHWord, TempVal);
 		RT_TRACE(COMP_POWER_TRACKING, "CCK chnl 14, reg 0x%x = 0x%x\n",
 			rCCK0_TxFilter1, TempVal);
 		//Write 0xa24 ~ 0xa27
@@ -1136,7 +1136,7 @@ static void dm_CCKTxPowerAdjust_ThermalMeter(struct net_device *dev,	bool  bInCH
 					(CCKSwingTable_Ch14[priv->CCK_index][3]<<8) +
 					(CCKSwingTable_Ch14[priv->CCK_index][4]<<16 )+
 					(CCKSwingTable_Ch14[priv->CCK_index][5]<<24);
-		rtl8192_setBBreg(dev, rCCK0_TxFilter2, bMaskDWord, TempVal);
+		rtl8192_setBBreg(priv, rCCK0_TxFilter2, bMaskDWord, TempVal);
 		RT_TRACE(COMP_POWER_TRACKING, "CCK chnl 14, reg 0x%x = 0x%x\n",
 			rCCK0_TxFilter2, TempVal);
 		//Write 0xa28  0xa29
@@ -1144,7 +1144,7 @@ static void dm_CCKTxPowerAdjust_ThermalMeter(struct net_device *dev,	bool  bInCH
 		TempVal = 	CCKSwingTable_Ch14[priv->CCK_index][6] +
 					(CCKSwingTable_Ch14[priv->CCK_index][7]<<8) ;
 
-		rtl8192_setBBreg(dev, rCCK0_DebugPort, bMaskLWord, TempVal);
+		rtl8192_setBBreg(priv, rCCK0_DebugPort, bMaskLWord, TempVal);
 		RT_TRACE(COMP_POWER_TRACKING,"CCK chnl 14, reg 0x%x = 0x%x\n",
 			rCCK0_DebugPort, TempVal);
 	}
@@ -1295,7 +1295,7 @@ static void dm_ctrl_initgain_byrssi_by_driverrssi(
 	if(fw_dig <= 3)	// execute several times to make sure the FW Dig is disabled
 	{// FW DIG Off
 		for(i=0; i<3; i++)
-			rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8);	// Only clear byte 1 and rewrite.
+			rtl8192_setBBreg(priv, UFWP, bMaskByte1, 0x8);	// Only clear byte 1 and rewrite.
 		fw_dig++;
 		dm_digtable.dig_state = DM_STA_DIG_OFF;	//fw dig off.
 	}
@@ -1332,7 +1332,7 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
 		dm_digtable.dig_state = DM_STA_DIG_MAX;
 		// Fw DIG On.
 		for(i=0; i<3; i++)
-			rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1);	// Only clear byte 1 and rewrite.
+			rtl8192_setBBreg(priv, UFWP, bMaskByte1, 0x1);	// Only clear byte 1 and rewrite.
 		dm_digtable.dig_algorithm_switch = 0;
 	}
 
@@ -1367,7 +1367,7 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
 		dm_digtable.dig_state = DM_STA_DIG_OFF;
 
 		// 1.1 DIG Off.
-		rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8);	// Only clear byte 1 and rewrite.
+		rtl8192_setBBreg(priv, UFWP, bMaskByte1, 0x8);	// Only clear byte 1 and rewrite.
 
 		// 1.2 Set initial gain.
 		write_nic_byte(priv, rOFDM0_XAAGCCore1, 0x17);
@@ -1451,7 +1451,7 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
 		//PlatformEFIOWrite4Byte(pAdapter, rOFDM0_ECCAThreshold, 0x346);
 
 		// 2.5 DIG On.
-		rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1);	// Only clear byte 1 and rewrite.
+		rtl8192_setBBreg(priv, UFWP, bMaskByte1, 0x1);	// Only clear byte 1 and rewrite.
 
 	}
 
@@ -2227,8 +2227,8 @@ static void dm_rxpath_sel_byrssi(struct net_device * dev)
 			//record the enabled rssi threshold
 			DM_RxPathSelTable.rf_enable_rssi_th[min_rssi_index] = tmp_max_rssi+5;
 			//disable the BB Rx path, OFDM
-			rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0x1<<min_rssi_index, 0x0);	// 0xc04[3:0]
-			rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0x1<<min_rssi_index, 0x0);	// 0xd04[3:0]
+			rtl8192_setBBreg(priv, rOFDM0_TRxPathEnable, 0x1<<min_rssi_index, 0x0);	// 0xc04[3:0]
+			rtl8192_setBBreg(priv, rOFDM1_TRxPathEnable, 0x1<<min_rssi_index, 0x0);	// 0xd04[3:0]
 			disabled_rf_cnt++;
 		}
 		if(DM_RxPathSelTable.cck_method == CCK_Rx_Version_1)
@@ -2243,7 +2243,7 @@ static void dm_rxpath_sel_byrssi(struct net_device * dev)
 	if(update_cck_rx_path)
 	{
 		DM_RxPathSelTable.cck_Rx_path = (cck_default_Rx<<2)|(cck_optional_Rx);
-		rtl8192_setBBreg(dev, rCCK0_AFESetting, 0x0f000000, DM_RxPathSelTable.cck_Rx_path);
+		rtl8192_setBBreg(priv, rCCK0_AFESetting, 0x0f000000, DM_RxPathSelTable.cck_Rx_path);
 	}
 
 	if(DM_RxPathSelTable.disabledRF)
@@ -2255,8 +2255,8 @@ static void dm_rxpath_sel_byrssi(struct net_device * dev)
 				if(tmp_max_rssi >= DM_RxPathSelTable.rf_enable_rssi_th[i])
 				{
 					//enable the BB Rx path
-					rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0x1<<i, 0x1);	// 0xc04[3:0]
-					rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0x1<<i, 0x1);	// 0xd04[3:0]
+					rtl8192_setBBreg(priv, rOFDM0_TRxPathEnable, 0x1<<i, 0x1);	// 0xc04[3:0]
+					rtl8192_setBBreg(priv, rOFDM1_TRxPathEnable, 0x1<<i, 0x1);	// 0xd04[3:0]
 					DM_RxPathSelTable.rf_enable_rssi_th[i] = 100;
 					disabled_rf_cnt--;
 				}
@@ -2696,7 +2696,7 @@ static void dm_dynamic_txpower(struct net_device *dev)
 		RT_TRACE(COMP_TXAGC, "SetTxPowerLevel8190() channel = %d\n", priv->ieee80211->current_network.channel);
 
 
-		rtl8192_phy_setTxPower(dev,priv->ieee80211->current_network.channel);
+		rtl8192_phy_setTxPower(priv, priv->ieee80211->current_network.channel);
 
 	}
 	priv->bLastDTPFlag_High = priv->bDynamicTxHighPower;
diff --git a/drivers/staging/rtl8192e/r819xE_phy.c b/drivers/staging/rtl8192e/r819xE_phy.c
index 44e1123..e8a8b34 100644
--- a/drivers/staging/rtl8192e/r819xE_phy.c
+++ b/drivers/staging/rtl8192e/r819xE_phy.c
@@ -564,8 +564,9 @@ static u32 Rtl8192PciERadioD_Array[RadioD_ArrayLength] = {
 
 /*************************Define local function prototype**********************/
 
-static u32 phy_FwRFSerialRead(struct net_device* dev,RF90_RADIO_PATH_E	eRFPath,u32 Offset);
-static void phy_FwRFSerialWrite(struct net_device* dev,RF90_RADIO_PATH_E eRFPath,u32 Offset,u32	Data);
+static u32 phy_FwRFSerialRead(struct r8192_priv *priv, RF90_RADIO_PATH_E eRFPath, u32 Offset);
+static void phy_FwRFSerialWrite(struct r8192_priv *priv, RF90_RADIO_PATH_E eRFPath, u32 Offset, u32 Data);
+
 /*************************Define local function prototype**********************/
 /******************************************************************************
  *function:  This function read BB parameters from Header file we gen,
@@ -590,10 +591,9 @@ static u32 rtl8192_CalculateBitShift(u32 dwBitMask)
  *  output:  none
  *  return:  0(illegal, false), 1(legal,true)
  * ***************************************************************************/
-u8 rtl8192_phy_CheckIsLegalRFPath(struct net_device* dev, u32 eRFPath)
+u8 rtl8192_phy_CheckIsLegalRFPath(struct r8192_priv *priv, u32 eRFPath)
 {
 	u8 ret = 1;
-	struct r8192_priv *priv = ieee80211_priv(dev);
 
 	if (priv->rf_type == RF_2T4R)
 		ret = 0;
@@ -617,9 +617,8 @@ u8 rtl8192_phy_CheckIsLegalRFPath(struct net_device* dev, u32 eRFPath)
  *  return:  none
  *  notice:
  * ****************************************************************************/
-void rtl8192_setBBreg(struct net_device* dev, u32 dwRegAddr, u32 dwBitMask, u32 dwData)
+void rtl8192_setBBreg(struct r8192_priv *priv, u32 dwRegAddr, u32 dwBitMask, u32 dwData)
 {
-	struct r8192_priv *priv = ieee80211_priv(dev);
 	u32 OriginalValue, BitShift, NewValue;
 
 	if(dwBitMask!= bMaskDWord)
@@ -640,9 +639,8 @@ void rtl8192_setBBreg(struct net_device* dev, u32 dwRegAddr, u32 dwBitMask, u32
  *  return:  u32	Data	//the readback register value
  *  notice:
  * ****************************************************************************/
-u32 rtl8192_QueryBBReg(struct net_device* dev, u32 dwRegAddr, u32 dwBitMask)
+u32 rtl8192_QueryBBReg(struct r8192_priv *priv, u32 dwRegAddr, u32 dwBitMask)
 {
-	struct r8192_priv *priv = ieee80211_priv(dev);
 	u32 OriginalValue, BitShift;
 
 	OriginalValue = read_nic_dword(priv, dwRegAddr);
@@ -658,9 +656,9 @@ u32 rtl8192_QueryBBReg(struct net_device* dev, u32 dwRegAddr, u32 dwBitMask)
  *  return:  u32 	readback value
  *  notice:  There are three types of serial operations:(1) Software serial write.(2)Hardware LSSI-Low Speed Serial Interface.(3)Hardware HSSI-High speed serial write. Driver here need to implement (1) and (2)---need more spec for this information.
  * ****************************************************************************/
-static u32 rtl8192_phy_RFSerialRead(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 Offset)
+static u32 rtl8192_phy_RFSerialRead(struct r8192_priv *priv,
+				    RF90_RADIO_PATH_E eRFPath, u32 Offset)
 {
-	struct r8192_priv *priv = ieee80211_priv(dev);
 	u32 ret = 0;
 	u32 NewOffset = 0;
 	BB_REGISTER_DEFINITION_T* pPhyReg = &priv->PHYRegDef[eRFPath];
@@ -670,12 +668,12 @@ static u32 rtl8192_phy_RFSerialRead(struct net_device* dev, RF90_RADIO_PATH_E eR
 
 	//switch page for 8256 RF IC
 	//analog to digital off, for protection
-	rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0xf00, 0x0);// 0x88c[11:8]
+	rtl8192_setBBreg(priv, rFPGA0_AnalogParameter4, 0xf00, 0x0);// 0x88c[11:8]
 	if (Offset >= 31)
 	{
 		priv->RfReg0Value[eRFPath] |= 0x140;
 		//Switch to Reg_Mode2 for Reg 31-45
-		rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath]<<16) );
+		rtl8192_setBBreg(priv, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath]<<16) );
 		//modify offset
 		NewOffset = Offset -30;
 	}
@@ -684,7 +682,7 @@ static u32 rtl8192_phy_RFSerialRead(struct net_device* dev, RF90_RADIO_PATH_E eR
 		priv->RfReg0Value[eRFPath] |= 0x100;
 		priv->RfReg0Value[eRFPath] &= (~0x40);
 		//Switch to Reg_Mode 1 for Reg16-30
-		rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath]<<16) );
+		rtl8192_setBBreg(priv, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath]<<16) );
 
 		NewOffset = Offset - 15;
 	}
@@ -692,30 +690,30 @@ static u32 rtl8192_phy_RFSerialRead(struct net_device* dev, RF90_RADIO_PATH_E eR
 		NewOffset = Offset;
 
 	//put desired read addr to LSSI control Register
-	rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, bLSSIReadAddress, NewOffset);
+	rtl8192_setBBreg(priv, pPhyReg->rfHSSIPara2, bLSSIReadAddress, NewOffset);
 	//Issue a posedge trigger
 	//
-	rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2,  bLSSIReadEdge, 0x0);
-	rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2,  bLSSIReadEdge, 0x1);
+	rtl8192_setBBreg(priv, pPhyReg->rfHSSIPara2,  bLSSIReadEdge, 0x0);
+	rtl8192_setBBreg(priv, pPhyReg->rfHSSIPara2,  bLSSIReadEdge, 0x1);
 
 
 	// TODO: we should not delay such a  long time. Ask help from SD3
 	msleep(1);
 
-	ret = rtl8192_QueryBBReg(dev, pPhyReg->rfLSSIReadBack, bLSSIReadBackData);
+	ret = rtl8192_QueryBBReg(priv, pPhyReg->rfLSSIReadBack, bLSSIReadBackData);
 
 
 	// Switch back to Reg_Mode0;
 	priv->RfReg0Value[eRFPath] &= 0xebf;
 
 	rtl8192_setBBreg(
-		dev,
+		priv,
 		pPhyReg->rf3wireOffset,
 		bMaskDWord,
 		(priv->RfReg0Value[eRFPath] << 16));
 
 	//analog to digital on
-	rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0x300, 0x3);// 0x88c[9:8]
+	rtl8192_setBBreg(priv, rFPGA0_AnalogParameter4, 0x300, 0x3);// 0x88c[9:8]
 
 	return ret;
 }
@@ -740,28 +738,29 @@ static u32 rtl8192_phy_RFSerialRead(struct net_device* dev, RF90_RADIO_PATH_E eR
  * Reg_Mode2	1		1			Reg 31 ~ 45(0x1 ~ 0xf)
  *------------------------------------------------------------------
  * ****************************************************************************/
-static void rtl8192_phy_RFSerialWrite(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 Offset, u32 Data)
+static void rtl8192_phy_RFSerialWrite(struct r8192_priv *priv,
+				      RF90_RADIO_PATH_E eRFPath, u32 Offset,
+				      u32 Data)
 {
-	struct r8192_priv *priv = ieee80211_priv(dev);
 	u32 DataAndAddr = 0, NewOffset = 0;
 	BB_REGISTER_DEFINITION_T	*pPhyReg = &priv->PHYRegDef[eRFPath];
 
 	Offset &= 0x3f;
 
 	//analog to digital off, for protection
-	rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0xf00, 0x0);// 0x88c[11:8]
+	rtl8192_setBBreg(priv, rFPGA0_AnalogParameter4, 0xf00, 0x0);// 0x88c[11:8]
 
 	if (Offset >= 31)
 	{
 		priv->RfReg0Value[eRFPath] |= 0x140;
-		rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath] << 16));
+		rtl8192_setBBreg(priv, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath] << 16));
 		NewOffset = Offset - 30;
 	}
 	else if (Offset >= 16)
 	{
 		priv->RfReg0Value[eRFPath] |= 0x100;
 		priv->RfReg0Value[eRFPath] &= (~0x40);
-		rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath]<<16));
+		rtl8192_setBBreg(priv, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath]<<16));
 		NewOffset = Offset - 15;
 	}
 	else
@@ -771,7 +770,7 @@ static void rtl8192_phy_RFSerialWrite(struct net_device* dev, RF90_RADIO_PATH_E
 	DataAndAddr = (Data<<16) | (NewOffset&0x3f);
 
 	// Write Operation
-	rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, DataAndAddr);
+	rtl8192_setBBreg(priv, pPhyReg->rf3wireOffset, bMaskDWord, DataAndAddr);
 
 
 	if(Offset==0x0)
@@ -782,19 +781,18 @@ static void rtl8192_phy_RFSerialWrite(struct net_device* dev, RF90_RADIO_PATH_E
 	{
 		priv->RfReg0Value[eRFPath] &= 0xebf;
 		rtl8192_setBBreg(
-			dev,
+			priv,
 			pPhyReg->rf3wireOffset,
 			bMaskDWord,
 			(priv->RfReg0Value[eRFPath] << 16));
 	}
 	//analog to digital on
-	rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0x300, 0x3);// 0x88c[9:8]
+	rtl8192_setBBreg(priv, rFPGA0_AnalogParameter4, 0x300, 0x3);// 0x88c[9:8]
 }
 
 /******************************************************************************
  *function:  This function set specific bits to RF register
- *   input:  net_device dev
- *   	     RF90_RADIO_PATH_E eRFPath //radio path of A/B/C/D
+ *   input:  RF90_RADIO_PATH_E eRFPath //radio path of A/B/C/D
  *           u32	RegAddr  //target addr to be modified
  *           u32	BitMask  //taget bit pos in the addr to be modified
  *           u32	Data     //value to be write
@@ -802,13 +800,13 @@ static void rtl8192_phy_RFSerialWrite(struct net_device* dev, RF90_RADIO_PATH_E
  *  return:  none
  *  notice:
  * ****************************************************************************/
-void rtl8192_phy_SetRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask, u32 Data)
+void rtl8192_phy_SetRFReg(struct r8192_priv *priv, RF90_RADIO_PATH_E eRFPath,
+			  u32 RegAddr, u32 BitMask, u32 Data)
 {
-	struct r8192_priv *priv = ieee80211_priv(dev);
 	u32 Original_Value, BitShift, New_Value;
 //	u8	time = 0;
 
-	if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath))
+	if (!rtl8192_phy_CheckIsLegalRFPath(priv, eRFPath))
 		return;
 	if (priv->eRFPowerState != eRfOn && !priv->being_init_adapter)
 		return;
@@ -819,13 +817,13 @@ void rtl8192_phy_SetRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32
 	{
 		if (BitMask != bMask12Bits) // RF data is 12 bits only
 		{
-			Original_Value = phy_FwRFSerialRead(dev, eRFPath, RegAddr);
+			Original_Value = phy_FwRFSerialRead(priv, eRFPath, RegAddr);
 			BitShift =  rtl8192_CalculateBitShift(BitMask);
 			New_Value = (((Original_Value) & (~BitMask)) | (Data<< BitShift));
 
-			phy_FwRFSerialWrite(dev, eRFPath, RegAddr, New_Value);
+			phy_FwRFSerialWrite(priv, eRFPath, RegAddr, New_Value);
 		}else
-			phy_FwRFSerialWrite(dev, eRFPath, RegAddr, Data);
+			phy_FwRFSerialWrite(priv, eRFPath, RegAddr, Data);
 		udelay(200);
 
 	}
@@ -833,13 +831,13 @@ void rtl8192_phy_SetRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32
 	{
 		if (BitMask != bMask12Bits) // RF data is 12 bits only
    	        {
-			Original_Value = rtl8192_phy_RFSerialRead(dev, eRFPath, RegAddr);
+			Original_Value = rtl8192_phy_RFSerialRead(priv, eRFPath, RegAddr);
       			BitShift =  rtl8192_CalculateBitShift(BitMask);
       			New_Value = (((Original_Value) & (~BitMask)) | (Data<< BitShift));
 
-			rtl8192_phy_RFSerialWrite(dev, eRFPath, RegAddr, New_Value);
+			rtl8192_phy_RFSerialWrite(priv, eRFPath, RegAddr, New_Value);
 	        }else
-			rtl8192_phy_RFSerialWrite(dev, eRFPath, RegAddr, Data);
+			rtl8192_phy_RFSerialWrite(priv, eRFPath, RegAddr, Data);
 	}
 	//up(&priv->rf_sem);
 }
@@ -853,23 +851,24 @@ void rtl8192_phy_SetRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32
  *  return:  u32	Data	//the readback register value
  *  notice:
  * ****************************************************************************/
-u32 rtl8192_phy_QueryRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask)
+u32 rtl8192_phy_QueryRFReg(struct r8192_priv *priv, RF90_RADIO_PATH_E eRFPath,
+			   u32 RegAddr, u32 BitMask)
 {
 	u32 Original_Value, Readback_Value, BitShift;
-	struct r8192_priv *priv = ieee80211_priv(dev);
-	if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath))
+
+	if (!rtl8192_phy_CheckIsLegalRFPath(priv, eRFPath))
 		return 0;
 	if (priv->eRFPowerState != eRfOn && !priv->being_init_adapter)
 		return	0;
 	down(&priv->rf_sem);
 	if (priv->Rf_Mode == RF_OP_By_FW)
 	{
-		Original_Value = phy_FwRFSerialRead(dev, eRFPath, RegAddr);
+		Original_Value = phy_FwRFSerialRead(priv, eRFPath, RegAddr);
 		udelay(200);
 	}
 	else
 	{
-		Original_Value = rtl8192_phy_RFSerialRead(dev, eRFPath, RegAddr);
+		Original_Value = rtl8192_phy_RFSerialRead(priv, eRFPath, RegAddr);
 
 	}
 	BitShift =  rtl8192_CalculateBitShift(BitMask);
@@ -886,12 +885,9 @@ u32 rtl8192_phy_QueryRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u3
  *  return:  none
  *  notice:
  * ***************************************************************************/
-static u32 phy_FwRFSerialRead(
-	struct net_device* dev,
-	RF90_RADIO_PATH_E	eRFPath,
-	u32				Offset	)
+static u32 phy_FwRFSerialRead(struct r8192_priv *priv,
+			      RF90_RADIO_PATH_E eRFPath, u32 Offset)
 {
-	struct r8192_priv *priv = ieee80211_priv(dev);
 	u32		Data = 0;
 	u8		time = 0;
 	//DbgPrint("FW RF CTRL\n\r");
@@ -944,14 +940,9 @@ static u32 phy_FwRFSerialRead(
  *  return:  none
  *  notice:
  * ***************************************************************************/
-static void
-phy_FwRFSerialWrite(
-		struct net_device* dev,
-		RF90_RADIO_PATH_E	eRFPath,
-		u32				Offset,
-		u32				Data	)
+static void phy_FwRFSerialWrite(struct r8192_priv *priv,
+				RF90_RADIO_PATH_E eRFPath, u32 Offset, u32 Data)
 {
-	struct r8192_priv *priv = ieee80211_priv(dev);
 	u8	time = 0;
 
 	//DbgPrint("N FW RF CTRL RF-%d OF%02x DATA=%03x\n\r", eRFPath, Offset, Data);
@@ -1002,11 +993,10 @@ phy_FwRFSerialWrite(
  *  notice:  BB parameters may change all the time, so please make
  *           sure it has been synced with the newest.
  * ***************************************************************************/
-void rtl8192_phy_configmac(struct net_device* dev)
+void rtl8192_phy_configmac(struct r8192_priv *priv)
 {
 	u32 dwArrayLen = 0, i = 0;
 	u32* pdwArray = NULL;
-	struct r8192_priv *priv = ieee80211_priv(dev);
 #ifdef TO_DO_LIST
 if(Adapter->bInHctTest)
 	{
@@ -1038,7 +1028,7 @@ if(Adapter->bInHctTest)
 			//DbgPrint("ptrArray[i], ptrArray[i+1], ptrArray[i+2] = %x, %x, %x\n",
 			//	ptrArray[i], ptrArray[i+1], ptrArray[i+2]);
 		}
-		rtl8192_setBBreg(dev, pdwArray[i], pdwArray[i+1], pdwArray[i+2]);
+		rtl8192_setBBreg(priv, pdwArray[i], pdwArray[i+1], pdwArray[i+2]);
 	}
 }
 
@@ -1051,14 +1041,13 @@ if(Adapter->bInHctTest)
  *           sure it has been synced with the newest.
  * ***************************************************************************/
 
-void rtl8192_phyConfigBB(struct net_device* dev, u8 ConfigType)
+void rtl8192_phyConfigBB(struct r8192_priv *priv, u8 ConfigType)
 {
 	int i;
 	//u8 ArrayLength;
 	u32*	Rtl819XPHY_REGArray_Table = NULL;
 	u32*	Rtl819XAGCTAB_Array_Table = NULL;
 	u16	AGCTAB_ArrayLen, PHY_REGArrayLen = 0;
-	struct r8192_priv *priv = ieee80211_priv(dev);
 #ifdef TO_DO_LIST
 	u32 *rtl8192PhyRegArrayTable = NULL, *rtl8192AgcTabArrayTable = NULL;
 	if(Adapter->bInHctTest)
@@ -1098,7 +1087,7 @@ void rtl8192_phyConfigBB(struct net_device* dev, u8 ConfigType)
 	{
 		for (i=0; i<PHY_REGArrayLen; i+=2)
 		{
-			rtl8192_setBBreg(dev, Rtl819XPHY_REGArray_Table[i], bMaskDWord, Rtl819XPHY_REGArray_Table[i+1]);
+			rtl8192_setBBreg(priv, Rtl819XPHY_REGArray_Table[i], bMaskDWord, Rtl819XPHY_REGArray_Table[i+1]);
 			RT_TRACE(COMP_DBG, "i: %x, The Rtl819xUsbPHY_REGArray[0] is %x Rtl819xUsbPHY_REGArray[1] is %x\n",i, Rtl819XPHY_REGArray_Table[i], Rtl819XPHY_REGArray_Table[i+1]);
 		}
 	}
@@ -1106,7 +1095,7 @@ void rtl8192_phyConfigBB(struct net_device* dev, u8 ConfigType)
 	{
 		for (i=0; i<AGCTAB_ArrayLen; i+=2)
 		{
-			rtl8192_setBBreg(dev, Rtl819XAGCTAB_Array_Table[i], bMaskDWord, Rtl819XAGCTAB_Array_Table[i+1]);
+			rtl8192_setBBreg(priv, Rtl819XAGCTAB_Array_Table[i], bMaskDWord, Rtl819XAGCTAB_Array_Table[i+1]);
 			RT_TRACE(COMP_DBG, "i:%x, The rtl819XAGCTAB_Array[0] is %x rtl819XAGCTAB_Array[1] is %x\n",i, Rtl819XAGCTAB_Array_Table[i], Rtl819XAGCTAB_Array_Table[i+1]);
 		}
 	}
@@ -1119,9 +1108,8 @@ void rtl8192_phyConfigBB(struct net_device* dev, u8 ConfigType)
  *  return:  none
  *  notice:  Initialization value here is constant and it should never be changed
  * ***************************************************************************/
-static void rtl8192_InitBBRFRegDef(struct net_device* dev)
+static void rtl8192_InitBBRFRegDef(struct r8192_priv *priv)
 {
-	struct r8192_priv *priv = ieee80211_priv(dev);
 // RF Interface Sowrtware Control
 	priv->PHYRegDef[RF90_PATH_A].rfintfs = rFPGA0_XAB_RFInterfaceSW; // 16 LSBs if read 32-bit from 0x870
 	priv->PHYRegDef[RF90_PATH_B].rfintfs = rFPGA0_XAB_RFInterfaceSW; // 16 MSBs if read 32-bit from 0x870 (16-bit for 0x872)
@@ -1234,9 +1222,10 @@ static void rtl8192_InitBBRFRegDef(struct net_device* dev)
  *  return:  return whether BB and RF is ok(0:OK; 1:Fail)
  *  notice:  This function may be removed in the ASIC
  * ***************************************************************************/
-RT_STATUS rtl8192_phy_checkBBAndRF(struct net_device* dev, HW90_BLOCK_E CheckBlock, RF90_RADIO_PATH_E eRFPath)
+RT_STATUS rtl8192_phy_checkBBAndRF(struct r8192_priv *priv,
+				   HW90_BLOCK_E CheckBlock,
+				   RF90_RADIO_PATH_E eRFPath)
 {
-	struct r8192_priv *priv = ieee80211_priv(dev);
 //	BB_REGISTER_DEFINITION_T *pPhyReg = &priv->PHYRegDef[eRFPath];
 	RT_STATUS ret = RT_STATUS_SUCCESS;
 	u32 i, CheckTimes = 4, dwRegRead = 0;
@@ -1268,10 +1257,10 @@ RT_STATUS rtl8192_phy_checkBBAndRF(struct net_device* dev, HW90_BLOCK_E CheckBlo
 
 		case HW90_BLOCK_RF:
 			WriteData[i] &= 0xfff;
-			rtl8192_phy_SetRFReg(dev, eRFPath, WriteAddr[HW90_BLOCK_RF], bMask12Bits, WriteData[i]);
+			rtl8192_phy_SetRFReg(priv, eRFPath, WriteAddr[HW90_BLOCK_RF], bMask12Bits, WriteData[i]);
 			// TODO: we should not delay for such a long time. Ask SD3
 			mdelay(10);
-			dwRegRead = rtl8192_phy_QueryRFReg(dev, eRFPath, WriteAddr[HW90_BLOCK_RF], bMaskDWord);
+			dwRegRead = rtl8192_phy_QueryRFReg(priv, eRFPath, WriteAddr[HW90_BLOCK_RF], bMaskDWord);
 			mdelay(10);
 			break;
 
@@ -1304,10 +1293,10 @@ RT_STATUS rtl8192_phy_checkBBAndRF(struct net_device* dev, HW90_BLOCK_E CheckBlo
  *  notice:  Initialization value may change all the time, so please make
  *           sure it has been synced with the newest.
  * ***************************************************************************/
-static RT_STATUS rtl8192_BB_Config_ParaFile(struct net_device* dev)
+static RT_STATUS rtl8192_BB_Config_ParaFile(struct r8192_priv *priv)
 {
-	struct r8192_priv *priv = ieee80211_priv(dev);
 	RT_STATUS rtStatus = RT_STATUS_SUCCESS;
+
 	u8 bRegValue = 0, eCheckItem = 0;
 	u32 dwRegValue = 0;
 	/**************************************
@@ -1326,7 +1315,7 @@ static RT_STATUS rtl8192_BB_Config_ParaFile(struct net_device* dev)
 	// TODO: this function should be removed on ASIC , Emily 2007.2.2
 	for(eCheckItem=(HW90_BLOCK_E)HW90_BLOCK_PHY0; eCheckItem<=HW90_BLOCK_PHY1; eCheckItem++)
 	{
-		rtStatus  = rtl8192_phy_checkBBAndRF(dev, (HW90_BLOCK_E)eCheckItem, (RF90_RADIO_PATH_E)0); //don't care RF path
+		rtStatus  = rtl8192_phy_checkBBAndRF(priv, (HW90_BLOCK_E)eCheckItem, (RF90_RADIO_PATH_E)0); //don't care RF path
 		if(rtStatus != RT_STATUS_SUCCESS)
 		{
 			RT_TRACE((COMP_ERR | COMP_PHY), "PHY_RF8256_Config():Check PHY%d Fail!!\n", eCheckItem-1);
@@ -1334,10 +1323,10 @@ static RT_STATUS rtl8192_BB_Config_ParaFile(struct net_device* dev)
 		}
 	}
 	/*---- Set CCK and OFDM Block "OFF"----*/
-	rtl8192_setBBreg(dev, rFPGA0_RFMOD, bCCKEn|bOFDMEn, 0x0);
+	rtl8192_setBBreg(priv, rFPGA0_RFMOD, bCCKEn|bOFDMEn, 0x0);
 	/*----BB Register Initilazation----*/
 	//==m==>Set PHY REG From Header<==m==
-	rtl8192_phyConfigBB(dev, BaseBand_Config_PHY_REG);
+	rtl8192_phyConfigBB(priv, BaseBand_Config_PHY_REG);
 
 	/*----Set BB reset de-Active----*/
 	dwRegValue = read_nic_dword(priv, CPU_GEN);
@@ -1345,7 +1334,7 @@ static RT_STATUS rtl8192_BB_Config_ParaFile(struct net_device* dev)
 
  	/*----BB AGC table Initialization----*/
 	//==m==>Set PHY REG From Header<==m==
-	rtl8192_phyConfigBB(dev, BaseBand_Config_AGC_TAB);
+	rtl8192_phyConfigBB(priv, BaseBand_Config_AGC_TAB);
 
 	if (priv->card_8192_version  > VERSION_8190_BD)
 	{
@@ -1358,13 +1347,13 @@ static RT_STATUS rtl8192_BB_Config_ParaFile(struct net_device* dev)
 		}
 		else
 			dwRegValue = 0x0;	//Antenna gain offset doesn't make sense in RF 1T2R.
-		rtl8192_setBBreg(dev, rFPGA0_TxGainStage,
+		rtl8192_setBBreg(priv, rFPGA0_TxGainStage,
 			(bXBTxAGC|bXCTxAGC|bXDTxAGC), dwRegValue);
 
 
 		//XSTALLCap
 		dwRegValue = priv->CrystalCap;
-		rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, bXtalCap92x, dwRegValue);
+		rtl8192_setBBreg(priv, rFPGA0_AnalogParameter1, bXtalCap92x, dwRegValue);
 	}
 
 	// Check if the CCK HighPower is turned ON.
@@ -1380,12 +1369,12 @@ static RT_STATUS rtl8192_BB_Config_ParaFile(struct net_device* dev)
  *  notice:  Initialization value may change all the time, so please make
  *           sure it has been synced with the newest.
  * ***************************************************************************/
-RT_STATUS rtl8192_BBConfig(struct net_device* dev)
+RT_STATUS rtl8192_BBConfig(struct r8192_priv *priv)
 {
-	rtl8192_InitBBRFRegDef(dev);
+	rtl8192_InitBBRFRegDef(priv);
 	//config BB&RF. As hardCode based initialization has not been well
 	//implemented, so use file first.FIXME:should implement it for hardcode?
-	return rtl8192_BB_Config_ParaFile(dev);
+	return rtl8192_BB_Config_ParaFile(priv);
 }
 
 /******************************************************************************
@@ -1394,10 +1383,8 @@ RT_STATUS rtl8192_BBConfig(struct net_device* dev)
  *  output:  none
  *  return:  none
  * ***************************************************************************/
-void rtl8192_phy_getTxPower(struct net_device* dev)
+void rtl8192_phy_getTxPower(struct r8192_priv *priv)
 {
-	struct r8192_priv *priv = ieee80211_priv(dev);
-
 	priv->MCSTxPowerLevelOriginalOffset[0] =
 		read_nic_dword(priv, rTxAGC_Rate18_06);
 	priv->MCSTxPowerLevelOriginalOffset[1] =
@@ -1435,9 +1422,8 @@ void rtl8192_phy_getTxPower(struct net_device* dev)
  *  output:  none
  *  return:  none
  * ***************************************************************************/
-void rtl8192_phy_setTxPower(struct net_device* dev, u8 channel)
+void rtl8192_phy_setTxPower(struct r8192_priv *priv, u8 channel)
 {
-	struct r8192_priv *priv = ieee80211_priv(dev);
 	u8	powerlevel = 0,powerlevelOFDM24G = 0;
 	char ant_pwr_diff;
 	u32	u4RegValue;
@@ -1477,7 +1463,7 @@ void rtl8192_phy_setTxPower(struct net_device* dev, u8 channel)
 						priv->AntennaTxPwDiff[1]<<4 |
 						priv->AntennaTxPwDiff[0]);
 
-			rtl8192_setBBreg(dev, rFPGA0_TxGainStage,
+			rtl8192_setBBreg(priv, rFPGA0_TxGainStage,
 			(bXBTxAGC|bXCTxAGC|bXDTxAGC), u4RegValue);
 		}
 	}
@@ -1532,8 +1518,8 @@ void rtl8192_phy_setTxPower(struct net_device* dev, u8 channel)
 	pHalData->CurrentCckTxPwrIdx = powerlevel;
 	pHalData->CurrentOfdm24GTxPwrIdx = powerlevelOFDM24G;
 #endif
-	PHY_SetRF8256CCKTxPower(dev, powerlevel); //need further implement
-	PHY_SetRF8256OFDMTxPower(dev, powerlevelOFDM24G);
+	PHY_SetRF8256CCKTxPower(priv, powerlevel); //need further implement
+	PHY_SetRF8256OFDMTxPower(priv, powerlevelOFDM24G);
 }
 
 /******************************************************************************
@@ -1542,9 +1528,9 @@ void rtl8192_phy_setTxPower(struct net_device* dev, u8 channel)
  *  output:  none
  *  return:  only 8256 is supported
  * ***************************************************************************/
-RT_STATUS rtl8192_phy_RFConfig(struct net_device* dev)
+RT_STATUS rtl8192_phy_RFConfig(struct r8192_priv *priv)
 {
-	return PHY_RF8256_Config(dev);
+	return PHY_RF8256_Config(priv);
 }
 
 /******************************************************************************
@@ -1553,7 +1539,7 @@ RT_STATUS rtl8192_phy_RFConfig(struct net_device* dev)
  *  output:  none
  *  return:  As Windows has not implemented this, wait for complement
  * ***************************************************************************/
-void rtl8192_phy_updateInitGain(struct net_device* dev)
+void rtl8192_phy_updateInitGain(struct r8192_priv *priv)
 {
 }
 
@@ -1564,7 +1550,8 @@ void rtl8192_phy_updateInitGain(struct net_device* dev)
  *  return:  return code show if RF configuration is successful(0:pass, 1:fail)
  *    Note:  Delay may be required for RF configuration
  * ***************************************************************************/
-u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device* dev, RF90_RADIO_PATH_E	eRFPath)
+u8 rtl8192_phy_ConfigRFWithHeaderFile(struct r8192_priv *priv,
+				      RF90_RADIO_PATH_E eRFPath)
 {
 
 	int i;
@@ -1579,7 +1566,7 @@ u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device* dev, RF90_RADIO_PATH_E
 						msleep(100);
 						continue;
 				}
-				rtl8192_phy_SetRFReg(dev, eRFPath, Rtl819XRadioA_Array[i], bMask12Bits, Rtl819XRadioA_Array[i+1]);
+				rtl8192_phy_SetRFReg(priv, eRFPath, Rtl819XRadioA_Array[i], bMask12Bits, Rtl819XRadioA_Array[i+1]);
 				//msleep(1);
 
 			}
@@ -1591,7 +1578,7 @@ u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device* dev, RF90_RADIO_PATH_E
 						msleep(100);
 						continue;
 				}
-				rtl8192_phy_SetRFReg(dev, eRFPath, Rtl819XRadioB_Array[i], bMask12Bits, Rtl819XRadioB_Array[i+1]);
+				rtl8192_phy_SetRFReg(priv, eRFPath, Rtl819XRadioB_Array[i], bMask12Bits, Rtl819XRadioB_Array[i+1]);
 				//msleep(1);
 
 			}
@@ -1603,7 +1590,7 @@ u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device* dev, RF90_RADIO_PATH_E
 						msleep(100);
 						continue;
 				}
-				rtl8192_phy_SetRFReg(dev, eRFPath, Rtl819XRadioC_Array[i], bMask12Bits, Rtl819XRadioC_Array[i+1]);
+				rtl8192_phy_SetRFReg(priv, eRFPath, Rtl819XRadioC_Array[i], bMask12Bits, Rtl819XRadioC_Array[i+1]);
 				//msleep(1);
 
 			}
@@ -1615,7 +1602,7 @@ u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device* dev, RF90_RADIO_PATH_E
 						msleep(100);
 						continue;
 				}
-				rtl8192_phy_SetRFReg(dev, eRFPath, Rtl819XRadioD_Array[i], bMask12Bits, Rtl819XRadioD_Array[i+1]);
+				rtl8192_phy_SetRFReg(priv, eRFPath, Rtl819XRadioD_Array[i], bMask12Bits, Rtl819XRadioD_Array[i+1]);
 				//msleep(1);
 
 			}
@@ -1635,14 +1622,13 @@ u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device* dev, RF90_RADIO_PATH_E
  *  return:  none
  *    Note:
  * ***************************************************************************/
-static void rtl8192_SetTxPowerLevel(struct net_device *dev, u8 channel)
+static void rtl8192_SetTxPowerLevel(struct r8192_priv *priv, u8 channel)
 {
-	struct r8192_priv *priv = ieee80211_priv(dev);
 	u8	powerlevel = priv->TxPowerLevelCCK[channel-1];
 	u8	powerlevelOFDM24G = priv->TxPowerLevelOFDM24G[channel-1];
 
-	PHY_SetRF8256CCKTxPower(dev, powerlevel);
-	PHY_SetRF8256OFDMTxPower(dev, powerlevelOFDM24G);
+	PHY_SetRF8256CCKTxPower(priv, powerlevel);
+	PHY_SetRF8256OFDMTxPower(priv, powerlevelOFDM24G);
 }
 
 /****************************************************************************************
@@ -1701,9 +1687,9 @@ static u8 rtl8192_phy_SetSwChnlCmdArray(
  *  return:  true if finished, false otherwise
  *    Note:  Wait for simpler function to replace it //wb
  * ***************************************************************************/
-static u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8* stage, u8* step, u32* delay)
+static u8 rtl8192_phy_SwChnlStepByStep(struct r8192_priv *priv, u8 channel,
+				       u8* stage, u8* step, u32* delay)
 {
-	struct r8192_priv *priv = ieee80211_priv(dev);
 //	PCHANNEL_ACCESS_SETTING	pChnlAccessSetting;
 	SwChnlCmd				PreCommonCmd[MAX_PRECMD_CNT];
 	u32					PreCommonCmdCnt;
@@ -1792,7 +1778,7 @@ static u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8* s
 			{
 			case CmdID_SetTxPowerLevel:
 				if(priv->card_8192_version > (u8)VERSION_8190_BD) //xiong: consider it later!
-					rtl8192_SetTxPowerLevel(dev,channel);
+					rtl8192_SetTxPowerLevel(priv, channel);
 				break;
 			case CmdID_WritePortUlong:
 				write_nic_dword(priv, CurrentCmd->Para1, CurrentCmd->Para2);
@@ -1805,7 +1791,7 @@ static u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8* s
 				break;
 			case CmdID_RF_WriteReg:
 				for(eRFPath = 0; eRFPath <priv->NumTotalRFPath; eRFPath++)
-					rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, CurrentCmd->Para1, bMask12Bits, CurrentCmd->Para2<<7);
+					rtl8192_phy_SetRFReg(priv, (RF90_RADIO_PATH_E)eRFPath, CurrentCmd->Para1, bMask12Bits, CurrentCmd->Para2<<7);
 				break;
 			default:
 				break;
@@ -1828,12 +1814,11 @@ static u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8* s
  *  return:  noin
  *    Note:  We should not call this function directly
  * ***************************************************************************/
-static void rtl8192_phy_FinishSwChnlNow(struct net_device *dev, u8 channel)
+static void rtl8192_phy_FinishSwChnlNow(struct r8192_priv *priv, u8 channel)
 {
-	struct r8192_priv *priv = ieee80211_priv(dev);
 	u32	delay = 0;
 
-	while(!rtl8192_phy_SwChnlStepByStep(dev,channel,&priv->SwChnlStage,&priv->SwChnlStep,&delay))
+	while (!rtl8192_phy_SwChnlStepByStep(priv, channel, &priv->SwChnlStage, &priv->SwChnlStep, &delay))
 	{
 		if(delay>0)
 			msleep(delay);//or mdelay? need further consideration
@@ -1848,16 +1833,13 @@ static void rtl8192_phy_FinishSwChnlNow(struct net_device *dev, u8 channel)
  *  output:  none
  *  return:  noin
  * ***************************************************************************/
-void rtl8192_SwChnl_WorkItem(struct net_device *dev)
+void rtl8192_SwChnl_WorkItem(struct r8192_priv *priv)
 {
-
-	struct r8192_priv *priv = ieee80211_priv(dev);
-
 	RT_TRACE(COMP_TRACE, "==> SwChnlCallback819xUsbWorkItem()\n");
 
 	RT_TRACE(COMP_TRACE, "=====>--%s(), set chan:%d, priv:%p\n", __FUNCTION__, priv->chan, priv);
 
-	rtl8192_phy_FinishSwChnlNow(dev , priv->chan);
+	rtl8192_phy_FinishSwChnlNow(priv, priv->chan);
 
 	RT_TRACE(COMP_TRACE, "<== SwChnlCallback819xUsbWorkItem()\n");
 }
@@ -1916,19 +1898,16 @@ u8 rtl8192_phy_SwChnl(struct net_device* dev, u8 channel)
 
 	priv->SwChnlStage=0;
 	priv->SwChnlStep=0;
-//	schedule_work(&(priv->SwChnlWorkItem));
-//	rtl8192_SwChnl_WorkItem(dev);
-	if(priv->up) {
-//		queue_work(priv->priv_wq,&(priv->SwChnlWorkItem));
-	rtl8192_SwChnl_WorkItem(dev);
-	}
+	if (priv->up)
+		rtl8192_SwChnl_WorkItem(priv);
+
         priv->SwChnlInProgress = false;
 	return true;
 }
 
-static void CCK_Tx_Power_Track_BW_Switch_TSSI(struct net_device *dev	)
+static void CCK_Tx_Power_Track_BW_Switch_TSSI(struct r8192_priv *priv)
 {
-	struct r8192_priv *priv = ieee80211_priv(dev);
+	struct net_device *dev = priv->ieee80211->dev;
 
 	switch(priv->CurrentChannelBW)
 	{
@@ -1987,9 +1966,9 @@ static void CCK_Tx_Power_Track_BW_Switch_TSSI(struct net_device *dev	)
 	}
 }
 
-static void CCK_Tx_Power_Track_BW_Switch_ThermalMeter(struct net_device *dev)
+static void CCK_Tx_Power_Track_BW_Switch_ThermalMeter(struct r8192_priv *priv)
 {
-	struct r8192_priv *priv = ieee80211_priv(dev);
+	struct net_device *dev = priv->ieee80211->dev;
 
 	if(priv->ieee80211->current_network.channel == 14 && !priv->bcck_in_ch14)
 		priv->bcck_in_ch14 = TRUE;
@@ -2016,15 +1995,14 @@ static void CCK_Tx_Power_Track_BW_Switch_ThermalMeter(struct net_device *dev)
 	dm_cck_txpower_adjust(dev, priv->bcck_in_ch14);
 }
 
-static void CCK_Tx_Power_Track_BW_Switch(struct net_device *dev)
+static void CCK_Tx_Power_Track_BW_Switch(struct r8192_priv *priv)
 {
-	struct r8192_priv *priv = ieee80211_priv(dev);
 
 	//if(pHalData->bDcut == TRUE)
 	if(priv->IC_Cut >= IC_VersionCut_D)
-		CCK_Tx_Power_Track_BW_Switch_TSSI(dev);
+		CCK_Tx_Power_Track_BW_Switch_TSSI(priv);
 	else
-		CCK_Tx_Power_Track_BW_Switch_ThermalMeter(dev);
+		CCK_Tx_Power_Track_BW_Switch_ThermalMeter(priv);
 }
 
 
@@ -2039,10 +2017,8 @@ static void CCK_Tx_Power_Track_BW_Switch(struct net_device *dev)
  *    Note:  I doubt whether SetBWModeInProgress flag is necessary as we can
  *    	     test whether current work in the queue or not.//do I?
  * ***************************************************************************/
-void rtl8192_SetBWModeWorkItem(struct net_device *dev)
+void rtl8192_SetBWModeWorkItem(struct r8192_priv *priv)
 {
-
-	struct r8192_priv *priv = ieee80211_priv(dev);
 	u8 regBwOpMode;
 
 	RT_TRACE(COMP_SWBW, "==>rtl8192_SetBWModeWorkItem()  Switch to %s bandwidth\n",
@@ -2081,8 +2057,8 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev)
 	{
 		case HT_CHANNEL_WIDTH_20:
 			// Add by Vivi 20071119
-			rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x0);
-			rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x0);
+			rtl8192_setBBreg(priv, rFPGA0_RFMOD, bRFMOD, 0x0);
+			rtl8192_setBBreg(priv, rFPGA1_RFMOD, bRFMOD, 0x0);
 //			rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00100000, 1);
 
 			// Correct the tx power for CCK rate in 20M. Suggest by YN, 20071207
@@ -2096,14 +2072,14 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev)
 				write_nic_dword(priv, rCCK0_DebugPort, 0x00000204);
 			}
 			else
-				CCK_Tx_Power_Track_BW_Switch(dev);
+				CCK_Tx_Power_Track_BW_Switch(priv);
 
-			rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00100000, 1);
+			rtl8192_setBBreg(priv, rFPGA0_AnalogParameter1, 0x00100000, 1);
 			break;
 		case HT_CHANNEL_WIDTH_20_40:
 			// Add by Vivi 20071119
-			rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x1);
-			rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x1);
+			rtl8192_setBBreg(priv, rFPGA0_RFMOD, bRFMOD, 0x1);
+			rtl8192_setBBreg(priv, rFPGA1_RFMOD, bRFMOD, 0x1);
 			//rtl8192_setBBreg(dev, rCCK0_System, bCCKSideBand, (priv->nCur40MhzPrimeSC>>1));
                     //rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00100000, 0);
 			//rtl8192_setBBreg(dev, rOFDM1_LSTF, 0xC00, priv->nCur40MhzPrimeSC);
@@ -2119,14 +2095,14 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev)
 				write_nic_dword(priv, rCCK0_DebugPort, 0x00000409);
 			}
 			else
-				CCK_Tx_Power_Track_BW_Switch(dev);
+				CCK_Tx_Power_Track_BW_Switch(priv);
 
 			// Set Control channel to upper or lower. These settings are required only for 40MHz
-			rtl8192_setBBreg(dev, rCCK0_System, bCCKSideBand, (priv->nCur40MhzPrimeSC>>1));
-			rtl8192_setBBreg(dev, rOFDM1_LSTF, 0xC00, priv->nCur40MhzPrimeSC);
+			rtl8192_setBBreg(priv, rCCK0_System, bCCKSideBand, (priv->nCur40MhzPrimeSC>>1));
+			rtl8192_setBBreg(priv, rOFDM1_LSTF, 0xC00, priv->nCur40MhzPrimeSC);
 
 
-			rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00100000, 0);
+			rtl8192_setBBreg(priv, rFPGA0_AnalogParameter1, 0x00100000, 0);
 			break;
 		default:
 			RT_TRACE(COMP_ERR, "SetChannelBandwidth819xUsb(): unknown Bandwidth: %#X\n" ,priv->CurrentChannelBW);
@@ -2136,7 +2112,7 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev)
 	//Skip over setting of J-mode in BB register here. Default value is "None J mode". Emily 20070315
 
 	//<3>Set RF related register
-	PHY_SetRF8256Bandwidth(dev, priv->CurrentChannelBW);
+	PHY_SetRF8256Bandwidth(priv, priv->CurrentChannelBW);
 
 	atomic_dec(&(priv->ieee80211->atm_swbw));
 	priv->SetBWModeInProgress= false;
@@ -2176,7 +2152,7 @@ void rtl8192_SetBWMode(struct net_device *dev, HT_CHANNEL_WIDTH	Bandwidth, HT_EX
 
 	//queue_work(priv->priv_wq, &(priv->SetBWModeWorkItem));
 	//	schedule_work(&(priv->SetBWModeWorkItem));
-	rtl8192_SetBWModeWorkItem(dev);
+	rtl8192_SetBWModeWorkItem(priv);
 
 }
 
@@ -2198,13 +2174,13 @@ void InitialGain819xPci(struct net_device *dev, u8 Operation)
 				initial_gain = SCAN_RX_INITIAL_GAIN;//pHalData->DefaultInitialGain[0];//
 				BitMask = bMaskByte0;
 				if(dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM)
-					rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8);	// FW DIG OFF
-				priv->initgain_backup.xaagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XAAGCCore1, BitMask);
-				priv->initgain_backup.xbagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XBAGCCore1, BitMask);
-				priv->initgain_backup.xcagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XCAGCCore1, BitMask);
-				priv->initgain_backup.xdagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XDAGCCore1, BitMask);
+					rtl8192_setBBreg(priv, UFWP, bMaskByte1, 0x8);	// FW DIG OFF
+				priv->initgain_backup.xaagccore1 = (u8)rtl8192_QueryBBReg(priv, rOFDM0_XAAGCCore1, BitMask);
+				priv->initgain_backup.xbagccore1 = (u8)rtl8192_QueryBBReg(priv, rOFDM0_XBAGCCore1, BitMask);
+				priv->initgain_backup.xcagccore1 = (u8)rtl8192_QueryBBReg(priv, rOFDM0_XCAGCCore1, BitMask);
+				priv->initgain_backup.xdagccore1 = (u8)rtl8192_QueryBBReg(priv, rOFDM0_XDAGCCore1, BitMask);
 				BitMask  = bMaskByte2;
-				priv->initgain_backup.cca		= (u8)rtl8192_QueryBBReg(dev, rCCK0_CCA, BitMask);
+				priv->initgain_backup.cca = (u8)rtl8192_QueryBBReg(priv, rCCK0_CCA, BitMask);
 
 			RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc50 is %x\n",priv->initgain_backup.xaagccore1);
 			RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc58 is %x\n",priv->initgain_backup.xbagccore1);
@@ -2224,14 +2200,14 @@ void InitialGain819xPci(struct net_device *dev, u8 Operation)
 			RT_TRACE(COMP_SCAN, "IG_Restore, restore the initial gain.\n");
 				BitMask = 0x7f; //Bit0~ Bit6
 				if(dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM)
-					rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8);	// FW DIG OFF
+					rtl8192_setBBreg(priv, UFWP, bMaskByte1, 0x8);	// FW DIG OFF
 
-				rtl8192_setBBreg(dev, rOFDM0_XAAGCCore1, BitMask, (u32)priv->initgain_backup.xaagccore1);
-				rtl8192_setBBreg(dev, rOFDM0_XBAGCCore1, BitMask, (u32)priv->initgain_backup.xbagccore1);
-				rtl8192_setBBreg(dev, rOFDM0_XCAGCCore1, BitMask, (u32)priv->initgain_backup.xcagccore1);
-				rtl8192_setBBreg(dev, rOFDM0_XDAGCCore1, BitMask, (u32)priv->initgain_backup.xdagccore1);
+				rtl8192_setBBreg(priv, rOFDM0_XAAGCCore1, BitMask, (u32)priv->initgain_backup.xaagccore1);
+				rtl8192_setBBreg(priv, rOFDM0_XBAGCCore1, BitMask, (u32)priv->initgain_backup.xbagccore1);
+				rtl8192_setBBreg(priv, rOFDM0_XCAGCCore1, BitMask, (u32)priv->initgain_backup.xcagccore1);
+				rtl8192_setBBreg(priv, rOFDM0_XDAGCCore1, BitMask, (u32)priv->initgain_backup.xdagccore1);
 				BitMask  = bMaskByte2;
-				rtl8192_setBBreg(dev, rCCK0_CCA, BitMask, (u32)priv->initgain_backup.cca);
+				rtl8192_setBBreg(priv, rCCK0_CCA, BitMask, (u32)priv->initgain_backup.cca);
 
 			RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc50 is %x\n",priv->initgain_backup.xaagccore1);
 			RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc58 is %x\n",priv->initgain_backup.xbagccore1);
@@ -2239,11 +2215,11 @@ void InitialGain819xPci(struct net_device *dev, u8 Operation)
 			RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc68 is %x\n",priv->initgain_backup.xdagccore1);
 			RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xa0a is %x\n",priv->initgain_backup.cca);
 
-				rtl8192_phy_setTxPower(dev,priv->ieee80211->current_network.channel);
+				rtl8192_phy_setTxPower(priv, priv->ieee80211->current_network.channel);
 
 
 				if(dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM)
-					rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1);	// FW DIG ON
+					rtl8192_setBBreg(priv, UFWP, bMaskByte1, 0x1);	// FW DIG ON
 				break;
 			default:
 			RT_TRACE(COMP_SCAN, "Unknown IG Operation.\n");
diff --git a/drivers/staging/rtl8192e/r819xE_phy.h b/drivers/staging/rtl8192e/r819xE_phy.h
index c676c3a..46008ee 100644
--- a/drivers/staging/rtl8192e/r819xE_phy.h
+++ b/drivers/staging/rtl8192e/r819xE_phy.h
@@ -82,39 +82,39 @@ typedef enum _RF90_RADIO_PATH {
 #define bMaskLWord 0x0000ffff
 #define bMaskDWord 0xffffffff
 
-u8 rtl8192_phy_CheckIsLegalRFPath(struct net_device *dev, u32 eRFPath);
+u8 rtl8192_phy_CheckIsLegalRFPath(struct r8192_priv *priv, u32 eRFPath);
 
-void rtl8192_setBBreg(struct net_device *dev, u32 dwRegAddr,
+void rtl8192_setBBreg(struct r8192_priv *priv, u32 dwRegAddr,
 			     u32 dwBitMask, u32 dwData);
 
-u32 rtl8192_QueryBBReg(struct net_device *dev, u32 dwRegAddr,
+u32 rtl8192_QueryBBReg(struct r8192_priv *priv, u32 dwRegAddr,
 			     u32 dwBitMask);
 
-void rtl8192_phy_SetRFReg(struct net_device *dev,
+void rtl8192_phy_SetRFReg(struct r8192_priv *priv,
 		RF90_RADIO_PATH_E eRFPath, u32 RegAddr,
 		u32 BitMask, u32 Data);
 
-u32 rtl8192_phy_QueryRFReg(struct net_device *dev,
+u32 rtl8192_phy_QueryRFReg(struct r8192_priv *priv,
 		RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask);
 
-void rtl8192_phy_configmac(struct net_device *dev);
+void rtl8192_phy_configmac(struct r8192_priv *priv);
 
-void rtl8192_phyConfigBB(struct net_device *dev, u8 ConfigType);
+void rtl8192_phyConfigBB(struct r8192_priv *priv, u8 ConfigType);
 
-RT_STATUS rtl8192_phy_checkBBAndRF(struct net_device *dev,
+RT_STATUS rtl8192_phy_checkBBAndRF(struct r8192_priv *priv,
 		HW90_BLOCK_E CheckBlock, RF90_RADIO_PATH_E eRFPath);
 
-RT_STATUS rtl8192_BBConfig(struct net_device *dev);
+RT_STATUS rtl8192_BBConfig(struct r8192_priv *priv);
 
-void rtl8192_phy_getTxPower(struct net_device *dev);
+void rtl8192_phy_getTxPower(struct r8192_priv *priv);
 
-void rtl8192_phy_setTxPower(struct net_device *dev, u8 channel);
+void rtl8192_phy_setTxPower(struct r8192_priv *priv, u8 channel);
 
-RT_STATUS rtl8192_phy_RFConfig(struct net_device* dev);
+RT_STATUS rtl8192_phy_RFConfig(struct r8192_priv *priv);
 
-void rtl8192_phy_updateInitGain(struct net_device* dev);
+void rtl8192_phy_updateInitGain(struct r8192_priv *priv);
 
-u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device *dev,
+u8 rtl8192_phy_ConfigRFWithHeaderFile(struct r8192_priv *priv,
 					RF90_RADIO_PATH_E eRFPath);
 
 u8 rtl8192_phy_SwChnl(struct net_device *dev, u8 channel);
@@ -122,9 +122,9 @@ u8 rtl8192_phy_SwChnl(struct net_device *dev, u8 channel);
 void rtl8192_SetBWMode(struct net_device *dev,
 		HT_CHANNEL_WIDTH Bandwidth, HT_EXTCHNL_OFFSET Offset);
 
-void rtl8192_SwChnl_WorkItem(struct net_device *dev);
+void rtl8192_SwChnl_WorkItem(struct r8192_priv *priv);
 
-void rtl8192_SetBWModeWorkItem(struct net_device *dev);
+void rtl8192_SetBWModeWorkItem(struct r8192_priv *priv);
 
 void InitialGain819xPci(struct net_device *dev, u8 Operation);