V4L/DVB (13871): gspca - benq: New subdriver for camera 04a5:3035.

Tested-by: Francesco Lavra <francescolavra@interfree.it>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

3 files changed, 333 insertions, 0 deletions

diff --git a/drivers/media/video/gspca/Kconfig b/drivers/media/video/gspca/Kconfig
index 609d65b..824e95a 100644
--- a/drivers/media/video/gspca/Kconfig
+++ b/drivers/media/video/gspca/Kconfig
@@ -21,6 +21,15 @@ source "drivers/media/video/gspca/m5602/Kconfig"
 source "drivers/media/video/gspca/stv06xx/Kconfig"
 source "drivers/media/video/gspca/gl860/Kconfig"
 
+config USB_GSPCA_BENQ
+	tristate "Benq USB Camera Driver"
+	depends on VIDEO_V4L2 && USB_GSPCA
+	help
+	  Say Y here if you want support for the Benq DC E300 camera.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called gspca_benq.
+
 config USB_GSPCA_CONEX
 	tristate "Conexant Camera Driver"
 	depends on VIDEO_V4L2 && USB_GSPCA
diff --git a/drivers/media/video/gspca/Makefile b/drivers/media/video/gspca/Makefile
index ff2c727..82da9c3 100644
--- a/drivers/media/video/gspca/Makefile
+++ b/drivers/media/video/gspca/Makefile
@@ -1,4 +1,5 @@
 obj-$(CONFIG_USB_GSPCA)          += gspca_main.o
+obj-$(CONFIG_USB_GSPCA_BENQ)     += gspca_benq.o
 obj-$(CONFIG_USB_GSPCA_CONEX)    += gspca_conex.o
 obj-$(CONFIG_USB_GSPCA_ETOMS)    += gspca_etoms.o
 obj-$(CONFIG_USB_GSPCA_FINEPIX)  += gspca_finepix.o
@@ -30,6 +31,7 @@ obj-$(CONFIG_USB_GSPCA_VC032X)   += gspca_vc032x.o
 obj-$(CONFIG_USB_GSPCA_ZC3XX)    += gspca_zc3xx.o
 
 gspca_main-objs     := gspca.o
+gspca_benq-objs     := benq.o
 gspca_conex-objs    := conex.o
 gspca_etoms-objs    := etoms.o
 gspca_finepix-objs  := finepix.o
diff --git a/drivers/media/video/gspca/benq.c b/drivers/media/video/gspca/benq.c
new file mode 100644
index 0000000..604c087
--- /dev/null
+++ b/drivers/media/video/gspca/benq.c
@@ -0,0 +1,322 @@
+/*
+ * Benq DC E300 subdriver
+ *
+ * Copyright (C) 2009 Jean-Francois Moine (http://moinejf.free.fr)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#define MODULE_NAME "benq"
+
+#include "gspca.h"
+
+MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>");
+MODULE_DESCRIPTION("Benq DC E300 USB Camera Driver");
+MODULE_LICENSE("GPL");
+
+/* specific webcam descriptor */
+struct sd {
+	struct gspca_dev gspca_dev;	/* !! must be the first item */
+};
+
+/* V4L2 controls supported by the driver */
+static struct ctrl sd_ctrls[] = {
+};
+
+static const struct v4l2_pix_format vga_mode[] = {
+	{320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+		.bytesperline = 320,
+		.sizeimage = 320 * 240 * 3 / 8 + 590,
+		.colorspace = V4L2_COLORSPACE_JPEG},
+};
+
+static void sd_isoc_irq(struct urb *urb);
+
+/* -- write a register -- */
+static void reg_w(struct gspca_dev *gspca_dev,
+			u16 value, u16 index)
+{
+	struct usb_device *dev = gspca_dev->dev;
+	int ret;
+
+	if (gspca_dev->usb_err < 0)
+		return;
+	ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+			0x02,
+			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			value,
+			index,
+			NULL,
+			0,
+			500);
+	if (ret < 0) {
+		PDEBUG(D_ERR, "reg_w err %d", ret);
+		gspca_dev->usb_err = ret;
+	}
+}
+
+/* this function is called at probe time */
+static int sd_config(struct gspca_dev *gspca_dev,
+			const struct usb_device_id *id)
+{
+	gspca_dev->cam.cam_mode = vga_mode;
+	gspca_dev->cam.nmodes = ARRAY_SIZE(vga_mode);
+	gspca_dev->cam.no_urb_create = 1;
+	gspca_dev->cam.reverse_alts = 1;
+	return 0;
+}
+
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
+{
+	return 0;
+}
+
+static int sd_isoc_init(struct gspca_dev *gspca_dev)
+{
+	int ret;
+
+	ret = usb_set_interface(gspca_dev->dev, gspca_dev->iface,
+		gspca_dev->nbalt - 1);
+	if (ret < 0) {
+		err("usb_set_interface failed");
+		return ret;
+	}
+/*	reg_w(gspca_dev, 0x0003, 0x0002); */
+	return 0;
+}
+
+/* -- start the camera -- */
+static int sd_start(struct gspca_dev *gspca_dev)
+{
+	struct urb *urb;
+	int i, n;
+
+	/* create 4 URBs - 2 on endpoint 0x83 and 2 on 0x082 */
+#if MAX_NURBS < 4
+#error "Not enough URBs in the gspca table"
+#endif
+#define SD_PKT_SZ 64
+#define SD_NPKT 32
+	for (n = 0; n < 4; n++) {
+		urb = usb_alloc_urb(SD_NPKT, GFP_KERNEL);
+		if (!urb) {
+			err("usb_alloc_urb failed");
+			return -ENOMEM;
+		}
+		gspca_dev->urb[n] = urb;
+		urb->transfer_buffer = usb_buffer_alloc(gspca_dev->dev,
+						SD_PKT_SZ * SD_NPKT,
+						GFP_KERNEL,
+						&urb->transfer_dma);
+
+		if (urb->transfer_buffer == NULL) {
+			err("usb_buffer_alloc failed");
+			return -ENOMEM;
+		}
+		urb->dev = gspca_dev->dev;
+		urb->context = gspca_dev;
+		urb->transfer_buffer_length = SD_PKT_SZ * SD_NPKT;
+		urb->pipe = usb_rcvisocpipe(gspca_dev->dev,
+					n & 1 ? 0x82 : 0x83);
+		urb->transfer_flags = URB_ISO_ASAP
+					| URB_NO_TRANSFER_DMA_MAP;
+		urb->interval = 1;
+		urb->complete = sd_isoc_irq;
+		urb->number_of_packets = SD_NPKT;
+		for (i = 0; i < SD_NPKT; i++) {
+			urb->iso_frame_desc[i].length = SD_PKT_SZ;
+			urb->iso_frame_desc[i].offset = SD_PKT_SZ * i;
+		}
+	}
+
+	return gspca_dev->usb_err;
+}
+
+static void sd_stopN(struct gspca_dev *gspca_dev)
+{
+	reg_w(gspca_dev, 0x003c, 0x0003);
+	reg_w(gspca_dev, 0x003c, 0x0004);
+	reg_w(gspca_dev, 0x003c, 0x0005);
+	reg_w(gspca_dev, 0x003c, 0x0006);
+	reg_w(gspca_dev, 0x003c, 0x0007);
+	usb_set_interface(gspca_dev->dev, gspca_dev->iface, gspca_dev->nbalt - 1);
+}
+
+static void sd_pkt_scan(struct gspca_dev *gspca_dev,
+			u8 *data,		/* isoc packet */
+			int len)		/* iso packet length */
+{
+	/* unused */
+}
+
+/* reception of an URB */
+static void sd_isoc_irq(struct urb *urb)
+{
+	struct gspca_dev *gspca_dev = (struct gspca_dev *) urb->context;
+	struct urb *urb0;
+	u8 *data;
+	int i, st;
+
+	PDEBUG(D_PACK, "sd isoc irq");
+	if (!gspca_dev->streaming)
+		return;
+	if (urb->status != 0) {
+		if (urb->status == -ESHUTDOWN)
+			return;		/* disconnection */
+#ifdef CONFIG_PM
+		if (gspca_dev->frozen)
+			return;
+#endif
+		PDEBUG(D_ERR|D_PACK, "urb status: %d", urb->status);
+		return;
+	}
+
+	/* if this is a control URN (ep 0x83), wait */
+	if (urb == gspca_dev->urb[0] || urb == gspca_dev->urb[2])
+		return;
+
+	/* scan both received URBs */
+	if (urb == gspca_dev->urb[1])
+		urb0 = gspca_dev->urb[0];
+	else
+		urb0 = gspca_dev->urb[2];
+	for (i = 0; i < urb->number_of_packets; i++) {
+
+		/* check the packet status and length */
+		if (urb0->iso_frame_desc[i].actual_length != SD_PKT_SZ
+		    || urb->iso_frame_desc[i].actual_length != SD_PKT_SZ) {
+			PDEBUG(D_ERR, "ISOC bad lengths %d / %d",
+				urb0->iso_frame_desc[i].actual_length,
+				urb->iso_frame_desc[i].actual_length);
+			gspca_dev->last_packet_type = DISCARD_PACKET;
+			continue;
+		}
+		st = urb0->iso_frame_desc[i].status;
+		if (st == 0)
+			st = urb->iso_frame_desc[i].status;
+		if (st) {
+			PDEBUG(D_ERR,
+				"ISOC data error: [%d] status=%d",
+				i, st);
+			gspca_dev->last_packet_type = DISCARD_PACKET;
+			continue;
+		}
+
+		/*
+		 * The images are received in URBs of different endpoints
+		 * (0x83 and 0x82).
+		 * Image pieces in URBs of ep 0x83 are continuated in URBs of
+		 * ep 0x82 of the same index.
+		 * The packets in the URBs of endpoint 0x83 start with:
+		 *	- 80 ba/bb 00 00 = start of image followed by 'ff d8'
+		 *	- 04 ba/bb oo oo = image piece
+		 *		where 'oo oo' is the image offset
+						(not cheked)
+		 *	- (other -> bad frame)
+		 * The images are JPEG encoded with full header and
+		 * normal ff escape.
+		 * The end of image ('ff d9') may occur in any URB.
+		 * (not cheked)
+		 */
+		data = (u8 *) urb0->transfer_buffer
+					+ urb0->iso_frame_desc[i].offset;
+		if (data[0] == 0x80 && (data[1] & 0xfe) == 0xba) {
+
+			/* new image */
+			gspca_frame_add(gspca_dev, LAST_PACKET,
+					NULL, 0);
+			gspca_frame_add(gspca_dev, FIRST_PACKET,
+					data + 4, SD_PKT_SZ - 4);
+		} else if (data[0] == 0x04 && (data[1] & 0xfe) == 0xba) {
+			gspca_frame_add(gspca_dev, INTER_PACKET,
+					data + 4, SD_PKT_SZ - 4);
+		} else {
+			gspca_dev->last_packet_type = DISCARD_PACKET;
+			continue;
+		}
+		data = (u8 *) urb->transfer_buffer
+					+ urb->iso_frame_desc[i].offset;
+			gspca_frame_add(gspca_dev, INTER_PACKET,
+					data, SD_PKT_SZ);
+	}
+
+	/* resubmit the URBs */
+	st = usb_submit_urb(urb0, GFP_ATOMIC);
+	if (st < 0)
+		PDEBUG(D_ERR|D_PACK, "usb_submit_urb(0) ret %d", st);
+	st = usb_submit_urb(urb, GFP_ATOMIC);
+	if (st < 0)
+		PDEBUG(D_ERR|D_PACK, "usb_submit_urb() ret %d", st);
+}
+
+/* sub-driver description */
+static const struct sd_desc sd_desc = {
+	.name = MODULE_NAME,
+	.ctrls = sd_ctrls,
+	.nctrls = ARRAY_SIZE(sd_ctrls),
+	.config = sd_config,
+	.init = sd_init,
+	.isoc_init = sd_isoc_init,
+	.start = sd_start,
+	.stopN = sd_stopN,
+	.pkt_scan = sd_pkt_scan,
+};
+
+/* -- module initialisation -- */
+static const __devinitdata struct usb_device_id device_table[] = {
+	{USB_DEVICE(0x04a5, 0x3035)},
+	{}
+};
+MODULE_DEVICE_TABLE(usb, device_table);
+
+/* -- device connect -- */
+static int sd_probe(struct usb_interface *intf,
+			const struct usb_device_id *id)
+{
+	return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd),
+				THIS_MODULE);
+}
+
+static struct usb_driver sd_driver = {
+	.name = MODULE_NAME,
+	.id_table = device_table,
+	.probe = sd_probe,
+	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
+};
+
+/* -- module insert / remove -- */
+static int __init sd_mod_init(void)
+{
+	int ret;
+
+	ret = usb_register(&sd_driver);
+	if (ret < 0)
+		return ret;
+	info("registered");
+	return 0;
+}
+static void __exit sd_mod_exit(void)
+{
+	usb_deregister(&sd_driver);
+	info("deregistered");
+}
+
+module_init(sd_mod_init);
+module_exit(sd_mod_exit);