[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach

This just leaves include/asm-arm/plat-* to deal with.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 0 insertions, 197 deletions

diff --git a/include/asm-arm/arch-omap/io.h b/include/asm-arm/arch-omap/io.h
deleted file mode 100644
index 449e356..0000000
--- a/include/asm-arm/arch-omap/io.h
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/io.h
- *
- * IO definitions for TI OMAP processors and boards
- *
- * Copied from linux/include/asm-arm/arch-sa1100/io.h
- * Copyright (C) 1997-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Modifications:
- *  06-12-1997	RMK	Created.
- *  07-04-1999	RMK	Major cleanup
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/arch/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We don't actually have real ISA nor PCI buses, but there is so many
- * drivers out there that might just work if we fake them...
- */
-#define __io(a)			((void __iomem *)(PCIO_BASE + (a)))
-#define __mem_pci(a)		(a)
-
-/*
- * ----------------------------------------------------------------------------
- * I/O mapping
- * ----------------------------------------------------------------------------
- */
-
-#define PCIO_BASE	0
-
-#if defined(CONFIG_ARCH_OMAP1)
-
-#define IO_PHYS		0xFFFB0000
-#define IO_OFFSET	0x01000000	/* Virtual IO = 0xfefb0000 */
-#define IO_SIZE		0x40000
-#define IO_VIRT		(IO_PHYS - IO_OFFSET)
-#define IO_ADDRESS(pa)	((pa) - IO_OFFSET)
-#define OMAP1_IO_ADDRESS(pa)	((pa) - IO_OFFSET)
-#define io_p2v(pa)	((pa) - IO_OFFSET)
-#define io_v2p(va)	((va) + IO_OFFSET)
-
-#elif defined(CONFIG_ARCH_OMAP2)
-
-/* We map both L3 and L4 on OMAP2 */
-#define L3_24XX_PHYS	L3_24XX_BASE	/* 0x68000000 */
-#define L3_24XX_VIRT	0xf8000000
-#define L3_24XX_SIZE	SZ_1M		/* 44kB of 128MB used, want 1MB sect */
-#define L4_24XX_PHYS	L4_24XX_BASE	/* 0x48000000 */
-#define L4_24XX_VIRT	0xd8000000
-#define L4_24XX_SIZE	SZ_1M		/* 1MB of 128MB used, want 1MB sect */
-
-#ifdef CONFIG_ARCH_OMAP2430
-#define L4_WK_243X_PHYS		L4_WK_243X_BASE		/* 0x49000000 */
-#define L4_WK_243X_VIRT		0xd9000000
-#define L4_WK_243X_SIZE		SZ_1M
-#define OMAP243X_GPMC_PHYS	OMAP243X_GPMC_BASE	/* 0x49000000 */
-#define OMAP243X_GPMC_VIRT	0xFE000000
-#define OMAP243X_GPMC_SIZE	SZ_1M
-#define OMAP243X_SDRC_PHYS	OMAP243X_SDRC_BASE
-#define OMAP243X_SDRC_VIRT	0xFD000000
-#define OMAP243X_SDRC_SIZE	SZ_1M
-#define OMAP243X_SMS_PHYS	OMAP243X_SMS_BASE
-#define OMAP243X_SMS_VIRT	0xFC000000
-#define OMAP243X_SMS_SIZE	SZ_1M
-
-#endif
-
-#define IO_OFFSET	0x90000000
-#define IO_ADDRESS(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
-#define OMAP2_IO_ADDRESS(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
-#define io_p2v(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
-#define io_v2p(va)	((va) - IO_OFFSET)	/* Works for L3 and L4 */
-
-/* DSP */
-#define DSP_MEM_24XX_PHYS	OMAP2420_DSP_MEM_BASE	/* 0x58000000 */
-#define DSP_MEM_24XX_VIRT	0xe0000000
-#define DSP_MEM_24XX_SIZE	0x28000
-#define DSP_IPI_24XX_PHYS	OMAP2420_DSP_IPI_BASE	/* 0x59000000 */
-#define DSP_IPI_24XX_VIRT	0xe1000000
-#define DSP_IPI_24XX_SIZE	SZ_4K
-#define DSP_MMU_24XX_PHYS	OMAP2420_DSP_MMU_BASE	/* 0x5a000000 */
-#define DSP_MMU_24XX_VIRT	0xe2000000
-#define DSP_MMU_24XX_SIZE	SZ_4K
-
-#elif defined(CONFIG_ARCH_OMAP3)
-
-/* We map both L3 and L4 on OMAP3 */
-#define L3_34XX_PHYS		L3_34XX_BASE	/* 0x68000000 */
-#define L3_34XX_VIRT		0xf8000000
-#define L3_34XX_SIZE		SZ_1M   /* 44kB of 128MB used, want 1MB sect */
-
-#define L4_34XX_PHYS		L4_34XX_BASE	/* 0x48000000 */
-#define L4_34XX_VIRT		0xd8000000
-#define L4_34XX_SIZE		SZ_4M   /* 1MB of 128MB used, want 1MB sect */
-
-/*
- * Need to look at the Size 4M for L4.
- * VPOM3430 was not working for Int controller
- */
-
-#define L4_WK_34XX_PHYS		L4_WK_34XX_BASE /* 0x48300000 */
-#define L4_WK_34XX_VIRT		0xd8300000
-#define L4_WK_34XX_SIZE		SZ_1M
-
-#define L4_PER_34XX_PHYS	L4_PER_34XX_BASE /* 0x49000000 */
-#define L4_PER_34XX_VIRT	0xd9000000
-#define L4_PER_34XX_SIZE	SZ_1M
-
-#define L4_EMU_34XX_PHYS	L4_EMU_34XX_BASE /* 0x54000000 */
-#define L4_EMU_34XX_VIRT	0xe4000000
-#define L4_EMU_34XX_SIZE	SZ_64M
-
-#define OMAP34XX_GPMC_PHYS	OMAP34XX_GPMC_BASE /* 0x6E000000 */
-#define OMAP34XX_GPMC_VIRT	0xFE000000
-#define OMAP34XX_GPMC_SIZE	SZ_1M
-
-#define OMAP343X_SMS_PHYS	OMAP343X_SMS_BASE /* 0x6C000000 */
-#define OMAP343X_SMS_VIRT	0xFC000000
-#define OMAP343X_SMS_SIZE	SZ_1M
-
-#define OMAP343X_SDRC_PHYS	OMAP343X_SDRC_BASE /* 0x6D000000 */
-#define OMAP343X_SDRC_VIRT	0xFD000000
-#define OMAP343X_SDRC_SIZE	SZ_1M
-
-
-#define IO_OFFSET		0x90000000
-#define IO_ADDRESS(pa)		((pa) + IO_OFFSET)/* Works for L3 and L4 */
-#define OMAP2_IO_ADDRESS(pa)	((pa) + IO_OFFSET)/* Works for L3 and L4 */
-#define io_p2v(pa)		((pa) + IO_OFFSET)/* Works for L3 and L4 */
-#define io_v2p(va)		((va) - IO_OFFSET)/* Works for L3 and L4 */
-
-/* DSP */
-#define DSP_MEM_34XX_PHYS	OMAP34XX_DSP_MEM_BASE	/* 0x58000000 */
-#define DSP_MEM_34XX_VIRT	0xe0000000
-#define DSP_MEM_34XX_SIZE	0x28000
-#define DSP_IPI_34XX_PHYS	OMAP34XX_DSP_IPI_BASE	/* 0x59000000 */
-#define DSP_IPI_34XX_VIRT	0xe1000000
-#define DSP_IPI_34XX_SIZE	SZ_4K
-#define DSP_MMU_34XX_PHYS	OMAP34XX_DSP_MMU_BASE	/* 0x5a000000 */
-#define DSP_MMU_34XX_VIRT	0xe2000000
-#define DSP_MMU_34XX_SIZE	SZ_4K
-
-#endif
-
-#ifndef __ASSEMBLER__
-
-/*
- * Functions to access the OMAP IO region
- *
- * NOTE: - Use omap_read/write[bwl] for physical register addresses
- *	 - Use __raw_read/write[bwl]() for virtual register addresses
- *	 - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses
- *	 - DO NOT use hardcoded virtual addresses to allow changing the
- *	   IO address space again if needed
- */
-#define omap_readb(a)		(*(volatile unsigned char  *)IO_ADDRESS(a))
-#define omap_readw(a)		(*(volatile unsigned short *)IO_ADDRESS(a))
-#define omap_readl(a)		(*(volatile unsigned int   *)IO_ADDRESS(a))
-
-#define omap_writeb(v,a)	(*(volatile unsigned char  *)IO_ADDRESS(a) = (v))
-#define omap_writew(v,a)	(*(volatile unsigned short *)IO_ADDRESS(a) = (v))
-#define omap_writel(v,a)	(*(volatile unsigned int   *)IO_ADDRESS(a) = (v))
-
-extern void omap1_map_common_io(void);
-extern void omap1_init_common_hw(void);
-
-extern void omap2_map_common_io(void);
-extern void omap2_init_common_hw(void);
-
-#endif
-
-#endif