diff options
| -rw-r--r-- | drivers/scsi/Kconfig | 6 | ||||
| -rw-r--r-- | drivers/scsi/Makefile | 1 | ||||
| -rw-r--r-- | drivers/scsi/libfc/Makefile | 12 | ||||
| -rw-r--r-- | drivers/scsi/libfc/fc_disc.c | 845 | ||||
| -rw-r--r-- | drivers/scsi/libfc/fc_elsct.c | 71 | ||||
| -rw-r--r-- | drivers/scsi/libfc/fc_exch.c | 1970 | ||||
| -rw-r--r-- | drivers/scsi/libfc/fc_fcp.c | 2131 | ||||
| -rw-r--r-- | drivers/scsi/libfc/fc_frame.c | 89 | ||||
| -rw-r--r-- | drivers/scsi/libfc/fc_lport.c | 1604 | ||||
| -rw-r--r-- | drivers/scsi/libfc/fc_rport.c | 1291 | ||||
| -rw-r--r-- | include/scsi/fc_encode.h | 309 | ||||
| -rw-r--r-- | include/scsi/fc_frame.h | 242 | ||||
| -rw-r--r-- | include/scsi/libfc.h | 938 |
13 files changed, 9509 insertions, 0 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 1badcec..24d762a 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -603,6 +603,12 @@ config SCSI_FLASHPOINT substantial, so users of MultiMaster Host Adapters may not wish to include it. +config LIBFC + tristate "LibFC module" + depends on SCSI && SCSI_FC_ATTRS + ---help--- + Fibre Channel library module + config SCSI_DMX3191D tristate "DMX3191D SCSI support" depends on PCI && SCSI diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index b89aedf..87355f5 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -36,6 +36,7 @@ obj-$(CONFIG_SCSI_SAS_LIBSAS) += libsas/ obj-$(CONFIG_SCSI_SRP_ATTRS) += scsi_transport_srp.o obj-$(CONFIG_SCSI_DH) += device_handler/ +obj-$(CONFIG_LIBFC) += libfc/ obj-$(CONFIG_ISCSI_TCP) += libiscsi.o libiscsi_tcp.o iscsi_tcp.o obj-$(CONFIG_INFINIBAND_ISER) += libiscsi.o obj-$(CONFIG_SCSI_A4000T) += 53c700.o a4000t.o diff --git a/drivers/scsi/libfc/Makefile b/drivers/scsi/libfc/Makefile new file mode 100644 index 0000000..55f982d --- /dev/null +++ b/drivers/scsi/libfc/Makefile @@ -0,0 +1,12 @@ +# $Id: Makefile + +obj-$(CONFIG_LIBFC) += libfc.o + +libfc-objs := \ + fc_disc.o \ + fc_exch.o \ + fc_elsct.o \ + fc_frame.o \ + fc_lport.o \ + fc_rport.o \ + fc_fcp.o diff --git a/drivers/scsi/libfc/fc_disc.c b/drivers/scsi/libfc/fc_disc.c new file mode 100644 index 0000000..dd1564c --- /dev/null +++ b/drivers/scsi/libfc/fc_disc.c @@ -0,0 +1,845 @@ +/* + * Copyright(c) 2007 - 2008 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Maintained at www.Open-FCoE.org + */ + +/* + * Target Discovery + * + * This block discovers all FC-4 remote ports, including FCP initiators. It + * also handles RSCN events and re-discovery if necessary. + */ + +/* + * DISC LOCKING + * + * The disc mutex is can be locked when acquiring rport locks, but may not + * be held when acquiring the lport lock. Refer to fc_lport.c for more + * details. + */ + +#include <linux/timer.h> +#include <linux/err.h> +#include <asm/unaligned.h> + +#include <scsi/fc/fc_gs.h> + +#include <scsi/libfc.h> + +#define FC_DISC_RETRY_LIMIT 3 /* max retries */ +#define FC_DISC_RETRY_DELAY 500UL /* (msecs) delay */ + +#define FC_DISC_DELAY 3 + +static int fc_disc_debug; + +#define FC_DEBUG_DISC(fmt...) \ + do { \ + if (fc_disc_debug) \ + FC_DBG(fmt); \ + } while (0) + +static void fc_disc_gpn_ft_req(struct fc_disc *); +static void fc_disc_gpn_ft_resp(struct fc_seq *, struct fc_frame *, void *); +static int fc_disc_new_target(struct fc_disc *, struct fc_rport *, + struct fc_rport_identifiers *); +static void fc_disc_del_target(struct fc_disc *, struct fc_rport *); +static void fc_disc_done(struct fc_disc *); +static void fc_disc_timeout(struct work_struct *); +static void fc_disc_single(struct fc_disc *, struct fc_disc_port *); +static void fc_disc_restart(struct fc_disc *); + +/** + * fc_disc_lookup_rport - lookup a remote port by port_id + * @lport: Fibre Channel host port instance + * @port_id: remote port port_id to match + */ +struct fc_rport *fc_disc_lookup_rport(const struct fc_lport *lport, + u32 port_id) +{ + const struct fc_disc *disc = &lport->disc; + struct fc_rport *rport, *found = NULL; + struct fc_rport_libfc_priv *rdata; + int disc_found = 0; + + list_for_each_entry(rdata, &disc->rports, peers) { + rport = PRIV_TO_RPORT(rdata); + if (rport->port_id == port_id) { + disc_found = 1; + found = rport; + break; + } + } + + if (!disc_found) + found = NULL; + + return found; +} + +/** + * fc_disc_stop_rports - delete all the remote ports associated with the lport + * @disc: The discovery job to stop rports on + * + * Locking Note: This function expects that the lport mutex is locked before + * calling it. + */ +void fc_disc_stop_rports(struct fc_disc *disc) +{ + struct fc_lport *lport; + struct fc_rport *rport; + struct fc_rport_libfc_priv *rdata, *next; + + lport = disc->lport; + + mutex_lock(&disc->disc_mutex); + list_for_each_entry_safe(rdata, next, &disc->rports, peers) { + rport = PRIV_TO_RPORT(rdata); + list_del(&rdata->peers); + lport->tt.rport_logoff(rport); + } + + mutex_unlock(&disc->disc_mutex); +} + +/** + * fc_disc_rport_callback - Event handler for rport events + * @lport: The lport which is receiving the event + * @rport: The rport which the event has occured on + * @event: The event that occured + * + * Locking Note: The rport lock should not be held when calling + * this function. + */ +static void fc_disc_rport_callback(struct fc_lport *lport, + struct fc_rport *rport, + enum fc_rport_event event) +{ + struct fc_rport_libfc_priv *rdata = rport->dd_data; + struct fc_disc *disc = &lport->disc; + int found = 0; + + FC_DEBUG_DISC("Received a %d event for port (%6x)\n", event, + rport->port_id); + + if (event == RPORT_EV_CREATED) { + if (disc) { + found = 1; + mutex_lock(&disc->disc_mutex); + list_add_tail(&rdata->peers, &disc->rports); + mutex_unlock(&disc->disc_mutex); + } + } + + if (!found) + FC_DEBUG_DISC("The rport (%6x) is not maintained " + "by the discovery layer\n", rport->port_id); +} + +/** + * fc_disc_recv_rscn_req - Handle Registered State Change Notification (RSCN) + * @sp: Current sequence of the RSCN exchange + * @fp: RSCN Frame + * @lport: Fibre Channel host port instance + * + * Locking Note: This function expects that the disc_mutex is locked + * before it is called. + */ +static void fc_disc_recv_rscn_req(struct fc_seq *sp, struct fc_frame *fp, + struct fc_disc *disc) +{ + struct fc_lport *lport; + struct fc_rport *rport; + struct fc_rport_libfc_priv *rdata; + struct fc_els_rscn *rp; + struct fc_els_rscn_page *pp; + struct fc_seq_els_data rjt_data; + unsigned int len; + int redisc = 0; + enum fc_els_rscn_ev_qual ev_qual; + enum fc_els_rscn_addr_fmt fmt; + LIST_HEAD(disc_ports); + struct fc_disc_port *dp, *next; + + lport = disc->lport; + + FC_DEBUG_DISC("Received an RSCN event on port (%6x)\n", + fc_host_port_id(lport->host)); + + /* make sure the frame contains an RSCN message */ + rp = fc_frame_payload_get(fp, sizeof(*rp)); + if (!rp) + goto reject; + /* make sure the page length is as expected (4 bytes) */ + if (rp->rscn_page_len != sizeof(*pp)) + goto reject; + /* get the RSCN payload length */ + len = ntohs(rp->rscn_plen); + if (len < sizeof(*rp)) + goto reject; + /* make sure the frame contains the expected payload */ + rp = fc_frame_payload_get(fp, len); + if (!rp) + goto reject; + /* payload must be a multiple of the RSCN page size */ + len -= sizeof(*rp); + if (len % sizeof(*pp)) + goto reject; + + for (pp = (void *)(rp + 1); len > 0; len -= sizeof(*pp), pp++) { + ev_qual = pp->rscn_page_flags >> ELS_RSCN_EV_QUAL_BIT; + ev_qual &= ELS_RSCN_EV_QUAL_MASK; + fmt = pp->rscn_page_flags >> ELS_RSCN_ADDR_FMT_BIT; + fmt &= ELS_RSCN_ADDR_FMT_MASK; + /* + * if we get an address format other than port + * (area, domain, fabric), then do a full discovery + */ + switch (fmt) { + case ELS_ADDR_FMT_PORT: + FC_DEBUG_DISC("Port address format for port (%6x)\n", + ntoh24(pp->rscn_fid)); + dp = kzalloc(sizeof(*dp), GFP_KERNEL); + if (!dp) { + redisc = 1; + break; + } + dp->lp = lport; + dp->ids.port_id = ntoh24(pp->rscn_fid); + dp->ids.port_name = -1; + dp->ids.node_name = -1; + dp->ids.roles = FC_RPORT_ROLE_UNKNOWN; + list_add_tail(&dp->peers, &disc_ports); + break; + case ELS_ADDR_FMT_AREA: + case ELS_ADDR_FMT_DOM: + case ELS_ADDR_FMT_FAB: + default: + FC_DEBUG_DISC("Address format is (%d)\n", fmt); + redisc = 1; + break; + } + } + lport->tt.seq_els_rsp_send(sp, ELS_LS_ACC, NULL); + if (redisc) { + FC_DEBUG_DISC("RSCN received: rediscovering\n"); + fc_disc_restart(disc); + } else { + FC_DEBUG_DISC("RSCN received: not rediscovering. " + "redisc %d state %d in_prog %d\n", + redisc, lport->state, disc->pending); + list_for_each_entry_safe(dp, next, &disc_ports, peers) { + list_del(&dp->peers); + rport = lport->tt.rport_lookup(lport, dp->ids.port_id); + if (rport) { + rdata = RPORT_TO_PRIV(rport); + list_del(&rdata->peers); + lport->tt.rport_logoff(rport); + } + fc_disc_single(disc, dp); + } + } + fc_frame_free(fp); + return; +reject: + FC_DEBUG_DISC("Received a bad RSCN frame\n"); + rjt_data.fp = NULL; + rjt_data.reason = ELS_RJT_LOGIC; + rjt_data.explan = ELS_EXPL_NONE; + lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &rjt_data); + fc_frame_free(fp); +} + +/** + * fc_disc_recv_req - Handle incoming requests + * @sp: Current sequence of the request exchange + * @fp: The frame + * @lport: The FC local port + * + * Locking Note: This function is called from the EM and will lock + * the disc_mutex before calling the handler for the + * request. + */ +static void fc_disc_recv_req(struct fc_seq *sp, struct fc_frame *fp, + struct fc_lport *lport) +{ + u8 op; + struct fc_disc *disc = &lport->disc; + + op = fc_frame_payload_op(fp); + switch (op) { + case ELS_RSCN: + mutex_lock(&disc->disc_mutex); + fc_disc_recv_rscn_req(sp, fp, disc); + mutex_unlock(&disc->disc_mutex); + break; + default: + FC_DBG("Received an unsupported request. opcode (%x)\n", op); + break; + } +} + +/** + * fc_disc_restart - Restart discovery + * @lport: FC discovery context + * + * Locking Note: This function expects that the disc mutex + * is already locked. + */ +static void fc_disc_restart(struct fc_disc *disc) +{ + struct fc_rport *rport; + struct fc_rport_libfc_priv *rdata, *next; + struct fc_lport *lport = disc->lport; + + FC_DEBUG_DISC("Restarting discovery for port (%6x)\n", + fc_host_port_id(lport->host)); + + list_for_each_entry_safe(rdata, next, &disc->rports, peers) { + rport = PRIV_TO_RPORT(rdata); + FC_DEBUG_DISC("list_del(%6x)\n", rport->port_id); + list_del(&rdata->peers); + lport->tt.rport_logoff(rport); + } + + disc->requested = 1; + if (!disc->pending) + fc_disc_gpn_ft_req(disc); +} + +/** + * fc_disc_start - Fibre Channel Target discovery + * @lport: FC local port + * + * Returns non-zero if discovery cannot be started. + */ +static void fc_disc_start(void (*disc_callback)(struct fc_lport *, + enum fc_disc_event), + struct fc_lport *lport) +{ + struct fc_rport *rport; + struct fc_rport_identifiers ids; + struct fc_disc *disc = &lport->disc; + + /* + * At this point we may have a new disc job or an existing + * one. Either way, let's lock when we make changes to it + * and send the GPN_FT request. + */ + mutex_lock(&disc->disc_mutex); + + disc->disc_callback = disc_callback; + + /* + * If not ready, or already running discovery, just set request flag. + */ + disc->requested = 1; + + if (disc->pending) { + mutex_unlock(&disc->disc_mutex); + return; + } + + /* + * Handle point-to-point mode as a simple discovery + * of the remote port. Yucky, yucky, yuck, yuck! + */ + rport = disc->lport->ptp_rp; + if (rport) { + ids.port_id = rport->port_id; + ids.port_name = rport->port_name; + ids.node_name = rport->node_name; + ids.roles = FC_RPORT_ROLE_UNKNOWN; + get_device(&rport->dev); + + if (!fc_disc_new_target(disc, rport, &ids)) { + disc->event = DISC_EV_SUCCESS; + fc_disc_done(disc); + } + put_device(&rport->dev); + } else { + fc_disc_gpn_ft_req(disc); /* get ports by FC-4 type */ + } + + mutex_unlock(&disc->disc_mutex); +} + +static struct fc_rport_operations fc_disc_rport_ops = { + .event_callback = fc_disc_rport_callback, +}; + +/** + * fc_disc_new_target - Handle new target found by discovery + * @lport: FC local port + * @rport: The previous FC remote port (NULL if new remote port) + * @ids: Identifiers for the new FC remote port + * + * Locking Note: This function expects that the disc_mutex is locked + * before it is called. + */ +static int fc_disc_new_target(struct fc_disc *disc, + struct fc_rport *rport, + struct fc_rport_identifiers *ids) +{ + struct fc_lport *lport = disc->lport; + struct fc_rport_libfc_priv *rp; + int error = 0; + + if (rport && ids->port_name) { + if (rport->port_name == -1) { + /* + * Set WWN and fall through to notify of create. + */ + fc_rport_set_name(rport, ids->port_name, + rport->node_name); + } else if (rport->port_name != ids->port_name) { + /* + * This is a new port with the same FCID as + * a previously-discovered port. Presumably the old + * port logged out and a new port logged in and was + * assigned the same FCID. This should be rare. + * Delete the old one and fall thru to re-create. + */ + fc_disc_del_target(disc, rport); + rport = NULL; + } + } + if (((ids->port_name != -1) || (ids->port_id != -1)) && + ids->port_id != fc_host_port_id(lport->host) && + ids->port_name != lport->wwpn) { + if (!rport) { + rport = lport->tt.rport_lookup(lport, ids->port_id); + if (!rport) { + struct fc_disc_port dp; + dp.lp = lport; + dp.ids.port_id = ids->port_id; + dp.ids.port_name = ids->port_name; + dp.ids.node_name = ids->node_name; + dp.ids.roles = ids->roles; + rport = fc_rport_rogue_create(&dp); + } + if (!rport) + error = -ENOMEM; + } + if (rport) { + rp = rport->dd_data; + rp->ops = &fc_disc_rport_ops; + rp->rp_state = RPORT_ST_INIT; + lport->tt.rport_login(rport); + } + } + return error; +} + +/** + * fc_disc_del_target - Delete a target + * @disc: FC discovery context + * @rport: The remote port to be removed + */ +static void fc_disc_del_target(struct fc_disc *disc, struct fc_rport *rport) +{ + struct fc_lport *lport = disc->lport; + struct fc_rport_libfc_priv *rdata = RPORT_TO_PRIV(rport); + list_del(&rdata->peers); + lport->tt.rport_logoff(rport); +} + +/** + * fc_disc_done - Discovery has been completed + * @disc: FC discovery context + */ +static void fc_disc_done(struct fc_disc *disc) +{ + struct fc_lport *lport = disc->lport; + + FC_DEBUG_DISC("Discovery complete for port (%6x)\n", + fc_host_port_id(lport->host)); + + disc->disc_callback(lport, disc->event); + disc->event = DISC_EV_NONE; + + if (disc->requested) + fc_disc_gpn_ft_req(disc); + else + disc->pending = 0; +} + +/** + * fc_disc_error - Handle error on dNS request + * @disc: FC discovery context + * @fp: The frame pointer + */ +static void fc_disc_error(struct fc_disc *disc, struct fc_frame *fp) +{ + struct fc_lport *lport = disc->lport; + unsigned long delay = 0; + if (fc_disc_debug) + FC_DBG("Error %ld, retries %d/%d\n", + PTR_ERR(fp), disc->retry_count, + FC_DISC_RETRY_LIMIT); + + if (!fp || PTR_ERR(fp) == -FC_EX_TIMEOUT) { + /* + * Memory allocation failure, or the exchange timed out, + * retry after delay. + */ + if (disc->retry_count < FC_DISC_RETRY_LIMIT) { + /* go ahead and retry */ + if (!fp) + delay = msecs_to_jiffies(FC_DISC_RETRY_DELAY); + else { + delay = msecs_to_jiffies(lport->e_d_tov); + + /* timeout faster first time */ + if (!disc->retry_count) + delay /= 4; + } + disc->retry_count++; + schedule_delayed_work(&disc->disc_work, delay); + } else { + /* exceeded retries */ + disc->event = DISC_EV_FAILED; + fc_disc_done(disc); + } + } +} + +/** + * fc_disc_gpn_ft_req - Send Get Port Names by FC-4 type (GPN_FT) request + * @lport: FC discovery context + * + * Locking Note: This function expects that the disc_mutex is locked + * before it is called. + */ +static void fc_disc_gpn_ft_req(struct fc_disc *disc) +{ + struct fc_frame *fp; + struct fc_lport *lport = disc->lport; + + WARN_ON(!fc_lport_test_ready(lport)); + + disc->pending = 1; + disc->requested = 0; + + disc->buf_len = 0; + disc->seq_count = 0; + fp = fc_frame_alloc(lport, + sizeof(struct fc_ct_hdr) + + sizeof(struct fc_ns_gid_ft)); + if (!fp) + goto err; + + if (lport->tt.elsct_send(lport, NULL, fp, + FC_NS_GPN_FT, + fc_disc_gpn_ft_resp, + disc, lport->e_d_tov)) + return; +err: + fc_disc_error(disc, fp); +} + +/** + * fc_disc_gpn_ft_parse - Parse the list of IDs and names resulting from a request + * @lport: Fibre Channel host port instance + * @buf: GPN_FT response buffer + * @len: size of response buffer + */ +static int fc_disc_gpn_ft_parse(struct fc_disc *disc, void *buf, size_t len) +{ + struct fc_lport *lport; + struct fc_gpn_ft_resp *np; + char *bp; + size_t plen; + size_t tlen; + int error = 0; + struct fc_disc_port dp; + struct fc_rport *rport; + struct fc_rport_libfc_priv *rdata; + + lport = disc->lport; + + /* + * Handle partial name record left over from previous call. + */ + bp = buf; + plen = len; + np = (struct fc_gpn_ft_resp *)bp; + tlen = disc->buf_len; + if (tlen) { + WARN_ON(tlen >= sizeof(*np)); + plen = sizeof(*np) - tlen; + WARN_ON(plen <= 0); + WARN_ON(plen >= sizeof(*np)); + if (plen > len) + plen = len; + np = &disc->partial_buf; + memcpy((char *)np + tlen, bp, plen); + + /* + * Set bp so that the loop below will advance it to the + * first valid full name element. + */ + bp -= tlen; + len += tlen; + plen += tlen; + disc->buf_len = (unsigned char) plen; + if (plen == sizeof(*np)) + disc->buf_len = 0; + } + + /* + * Handle full name records, including the one filled from above. + * Normally, np == bp and plen == len, but from the partial case above, + * bp, len describe the overall buffer, and np, plen describe the + * partial buffer, which if would usually be full now. + * After the first time through the loop, things return to "normal". + */ + while (plen >= sizeof(*np)) { + dp.lp = lport; + dp.ids.port_id = ntoh24(np->fp_fid); + dp.ids.port_name = ntohll(np->fp_wwpn); + dp.ids.node_name = -1; + dp.ids.roles = FC_RPORT_ROLE_UNKNOWN; + + if ((dp.ids.port_id != fc_host_port_id(lport->host)) && + (dp.ids.port_name != lport->wwpn)) { + rport = fc_rport_rogue_create(&dp); + if (rport) { + rdata = rport->dd_data; + rdata->ops = &fc_disc_rport_ops; + rdata->local_port = lport; + lport->tt.rport_login(rport); + } else + FC_DBG("Failed to allocate memory for " + "the newly discovered port (%6x)\n", + dp.ids.port_id); + } + + if (np->fp_flags & FC_NS_FID_LAST) { + disc->event = DISC_EV_SUCCESS; + fc_disc_done(disc); + len = 0; + break; + } + len -= sizeof(*np); + bp += sizeof(*np); + np = (struct fc_gpn_ft_resp *)bp; + plen = len; + } + + /* + * Save any partial record at the end of the buffer for next time. + */ + if (error == 0 && len > 0 && len < sizeof(*np)) { + if (np != &disc->partial_buf) { + FC_DEBUG_DISC("Partial buffer remains " + "for discovery by (%6x)\n", + fc_host_port_id(lport->host)); + memcpy(&disc->partial_buf, np, len); + } + disc->buf_len = (unsigned char) len; + } else { + disc->buf_len = 0; + } + return error; +} + +/* + * Handle retry of memory allocation for remote ports. + */ +static void fc_disc_timeout(struct work_struct *work) +{ + struct fc_disc *disc = container_of(work, + struct fc_disc, + disc_work.work); + mutex_lock(&disc->disc_mutex); + if (disc->requested && !disc->pending) + fc_disc_gpn_ft_req(disc); + mutex_unlock(&disc->disc_mutex); +} + +/** + * fc_disc_gpn_ft_resp - Handle a response frame from Get Port Names (GPN_FT) + * @sp: Current sequence of GPN_FT exchange + * @fp: response frame + * @lp_arg: Fibre Channel host port instance + * + * Locking Note: This function expects that the disc_mutex is locked + * before it is called. + */ +static void fc_disc_gpn_ft_resp(struct fc_seq *sp, struct fc_frame *fp, + void *disc_arg) +{ + struct fc_disc *disc = disc_arg; + struct fc_ct_hdr *cp; + struct fc_frame_header *fh; + unsigned int seq_cnt; + void *buf = NULL; + unsigned int len; + int error; + + FC_DEBUG_DISC("Received a GPN_FT response on port (%6x)\n", + fc_host_port_id(disc->lport->host)); + + if (IS_ERR(fp)) { + fc_disc_error(disc, fp); + return; + } + + WARN_ON(!fc_frame_is_linear(fp)); /* buffer must be contiguous */ + fh = fc_frame_header_get(fp); + len = fr_len(fp) - sizeof(*fh); + seq_cnt = ntohs(fh->fh_seq_cnt); + if (fr_sof(fp) == FC_SOF_I3 && seq_cnt == 0 && + disc->seq_count == 0) { + cp = fc_frame_payload_get(fp, sizeof(*cp)); + if (!cp) { + FC_DBG("GPN_FT response too short, len %d\n", + fr_len(fp)); + } else if (ntohs(cp->ct_cmd) == FC_FS_ACC) { + + /* + * Accepted. Parse response. + */ + buf = cp + 1; + len -= sizeof(*cp); + } else if (ntohs(cp->ct_cmd) == FC_FS_RJT) { + FC_DBG("GPN_FT rejected reason %x exp %x " + "(check zoning)\n", cp->ct_reason, + cp->ct_explan); + disc->event = DISC_EV_FAILED; + fc_disc_done(disc); + } else { + FC_DBG("GPN_FT unexpected response code %x\n", + ntohs(cp->ct_cmd)); + } + } else if (fr_sof(fp) == FC_SOF_N3 && + seq_cnt == disc->seq_count) { + buf = fh + 1; + } else { + FC_DBG("GPN_FT unexpected frame - out of sequence? " + "seq_cnt %x expected %x sof %x eof %x\n", + seq_cnt, disc->seq_count, fr_sof(fp), fr_eof(fp)); + } + if (buf) { + error = fc_disc_gpn_ft_parse(disc, buf, len); + if (error) + fc_disc_error(disc, fp); + else + disc->seq_count++; + } + fc_frame_free(fp); +} + +/** + * fc_disc_single - Discover the directory information for a single target + * @lport: FC local port + * @dp: The port to rediscover + * + * Locking Note: This function expects that the disc_mutex is locked + * before it is called. + */ +static void fc_disc_single(struct fc_disc *disc, struct fc_disc_port *dp) +{ + struct fc_lport *lport; + struct fc_rport *rport; + struct fc_rport *new_rport; + struct fc_rport_libfc_priv *rdata; + + lport = disc->lport; + + if (dp->ids.port_id == fc_host_port_id(lport->host)) + goto out; + + rport = lport->tt.rport_lookup(lport, dp->ids.port_id); + if (rport) + fc_disc_del_target(disc, rport); + + new_rport = fc_rport_rogue_create(dp); + if (new_rport) { + rdata = new_rport->dd_data; + rdata->ops = &fc_disc_rport_ops; + kfree(dp); + lport->tt.rport_login(new_rport); + } + return; +out: + kfree(dp); +} + +/** + * fc_disc_stop - Stop discovery for a given lport + * @lport: The lport that discovery should stop for + */ +void fc_disc_stop(struct fc_lport *lport) +{ + struct fc_disc *disc = &lport->disc; + + if (disc) { + cancel_delayed_work_sync(&disc->disc_work); + fc_disc_stop_rports(disc); + } +} + +/** + * fc_disc_stop_final - Stop discovery for a given lport + * @lport: The lport that discovery should stop for + * + * This function will block until discovery has been + * completely stopped and all rports have been deleted. + */ +void fc_disc_stop_final(struct fc_lport *lport) +{ + fc_disc_stop(lport); + lport->tt.rport_flush_queue(); +} + +/** + * fc_disc_init - Initialize the discovery block + * @lport: FC local port + */ +int fc_disc_init(struct fc_lport *lport) +{ + struct fc_disc *disc; + + if (!lport->tt.disc_start) + lport->tt.disc_start = fc_disc_start; + + if (!lport->tt.disc_stop) + lport->tt.disc_stop = fc_disc_stop; + + if (!lport->tt.disc_stop_final) + lport->tt.disc_stop_final = fc_disc_stop_final; + + if (!lport->tt.disc_recv_req) + lport->tt.disc_recv_req = fc_disc_recv_req; + + if (!lport->tt.rport_lookup) + lport->tt.rport_lookup = fc_disc_lookup_rport; + + disc = &lport->disc; + INIT_DELAYED_WORK(&disc->disc_work, fc_disc_timeout); + mutex_init(&disc->disc_mutex); + INIT_LIST_HEAD(&disc->rports); + + disc->lport = lport; + disc->delay = FC_DISC_DELAY; + disc->event = DISC_EV_NONE; + + return 0; +} +EXPORT_SYMBOL(fc_disc_init); diff --git a/drivers/scsi/libfc/fc_elsct.c b/drivers/scsi/libfc/fc_elsct.c new file mode 100644 index 0000000..dd47fe6 --- /dev/null +++ b/drivers/scsi/libfc/fc_elsct.c @@ -0,0 +1,71 @@ +/* + * Copyright(c) 2008 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Maintained at www.Open-FCoE.org + */ + +/* + * Provide interface to send ELS/CT FC frames + */ + +#include <asm/unaligned.h> +#include <scsi/fc/fc_gs.h> +#include <scsi/fc/fc_ns.h> +#include <scsi/fc/fc_els.h> +#include <scsi/libfc.h> +#include <scsi/fc_encode.h> + +/* + * fc_elsct_send - sends ELS/CT frame + */ +static struct fc_seq *fc_elsct_send(struct fc_lport *lport, + struct fc_rport *rport, + struct fc_frame *fp, + unsigned int op, + void (*resp)(struct fc_seq *, + struct fc_frame *fp, + void *arg), + void *arg, u32 timer_msec) +{ + enum fc_rctl r_ctl; + u32 did; + enum fc_fh_type fh_type; + int rc; + + /* ELS requests */ + if ((op >= ELS_LS_RJT) && (op <= ELS_AUTH_ELS)) + rc = fc_els_fill(lport, rport, fp, op, &r_ctl, &did, &fh_type); + else + /* CT requests */ + rc = fc_ct_fill(lport, fp, op, &r_ctl, &did, &fh_type); + + if (rc) + return NULL; + + fc_fill_fc_hdr(fp, r_ctl, did, fc_host_port_id(lport->host), fh_type, + FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0); + + return lport->tt.exch_seq_send(lport, fp, resp, NULL, arg, timer_msec); +} + +int fc_elsct_init(struct fc_lport *lport) +{ + if (!lport->tt.elsct_send) + lport->tt.elsct_send = fc_elsct_send; + + return 0; +} +EXPORT_SYMBOL(fc_elsct_init); diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c new file mode 100644 index 0000000..66db08a --- /dev/null +++ b/drivers/scsi/libfc/fc_exch.c @@ -0,0 +1,1970 @@ +/* + * Copyright(c) 2007 Intel Corporation. All rights reserved. + * Copyright(c) 2008 Red Hat, Inc. All rights reserved. + * Copyright(c) 2008 Mike Christie + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Maintained at www.Open-FCoE.org + */ + +/* + * Fibre Channel exchange and sequence handling. + */ + +#include <linux/timer.h> +#include <linux/gfp.h> +#include <linux/err.h> + +#include <scsi/fc/fc_fc2.h> + +#include <scsi/libfc.h> +#include <scsi/fc_encode.h> + +#define FC_DEF_R_A_TOV (10 * 1000) /* resource allocation timeout */ + +/* + * fc_exch_debug can be set in debugger or at compile time to get more logs. + */ +static int fc_exch_debug; + +#define FC_DEBUG_EXCH(fmt...) \ + do { \ + if (fc_exch_debug) \ + FC_DBG(fmt); \ + } while (0) + +static struct kmem_cache *fc_em_cachep; /* cache for exchanges */ + +/* + * Structure and function definitions for managing Fibre Channel Exchanges + * and Sequences. + * + * The three primary structures used here are fc_exch_mgr, fc_exch, and fc_seq. + * + * fc_exch_mgr holds the exchange state for an N port + * + * fc_exch holds state for one exchange and links to its active sequence. + * + * fc_seq holds the state for an individual sequence. + */ + +/* + * Exchange manager. + * + * This structure is the center for creating exchanges and sequences. + * It manages the allocation of exchange IDs. + */ +struct fc_exch_mgr { + enum fc_class class; /* default class for sequences */ + spinlock_t em_lock; /* exchange manager lock, + must be taken before ex_lock */ + u16 last_xid; /* last allocated exchange ID */ + u16 min_xid; /* min exchange ID */ + u16 max_xid; /* max exchange ID */ + u16 max_read; /* max exchange ID for read */ + u16 last_read; /* last xid allocated for read */ + u32 total_exches; /* total allocated exchanges */ + struct list_head ex_list; /* allocated exchanges list */ + struct fc_lport *lp; /* fc device instance */ + mempool_t *ep_pool; /* reserve ep's */ + + /* + * currently exchange mgr stats are updated but not used. + * either stats can be expose via sysfs or remove them + * all together if not used XXX + */ + struct { + atomic_t no_free_exch; + atomic_t no_free_exch_xid; + atomic_t xid_not_found; + atomic_t xid_busy; + atomic_t seq_not_found; + atomic_t non_bls_resp; + } stats; + struct fc_exch **exches; /* for exch pointers indexed by xid */ +}; +#define fc_seq_exch(sp) container_of(sp, struct fc_exch, seq) + +static void fc_exch_rrq(struct fc_exch *); +static void fc_seq_ls_acc(struct fc_seq *); +static void fc_seq_ls_rjt(struct fc_seq *, enum fc_els_rjt_reason, + enum fc_els_rjt_explan); +static void fc_exch_els_rec(struct fc_seq *, struct fc_frame *); +static void fc_exch_els_rrq(struct fc_seq *, struct fc_frame *); +static struct fc_seq *fc_seq_start_next_locked(struct fc_seq *sp); + +/* + * Internal implementation notes. + * + * The exchange manager is one by default in libfc but LLD may choose + * to have one per CPU. The sequence manager is one per exchange manager + * and currently never separated. + * + * Section 9.8 in FC-FS-2 specifies: "The SEQ_ID is a one-byte field + * assigned by the Sequence Initiator that shall be unique for a specific + * D_ID and S_ID pair while the Sequence is open." Note that it isn't + * qualified by exchange ID, which one might think it would be. + * In practice this limits the number of open sequences and exchanges to 256 + * per session. For most targets we could treat this limit as per exchange. + * + * The exchange and its sequence are freed when the last sequence is received. + * It's possible for the remote port to leave an exchange open without + * sending any sequences. + * + * Notes on reference counts: + * + * Exchanges are reference counted and exchange gets freed when the reference + * count becomes zero. + * + * Timeouts: + * Sequences are timed out for E_D_TOV and R_A_TOV. + * + * Sequence event handling: + * + * The following events may occur on initiator sequences: + * + * Send. + * For now, the whole thing is sent. + * Receive ACK + * This applies only to class F. + * The sequence is marked complete. + * ULP completion. + * The upper layer calls fc_exch_done() when done + * with exchange and sequence tuple. + * RX-inferred completion. + * When we receive the next sequence on the same exchange, we can + * retire the previous sequence ID. (XXX not implemented). + * Timeout. + * R_A_TOV frees the sequence ID. If we're waiting for ACK, + * E_D_TOV causes abort and calls upper layer response handler + * with FC_EX_TIMEOUT error. + * Receive RJT + * XXX defer. + * Send ABTS + * On timeout. + * + * The following events may occur on recipient sequences: + * + * Receive + * Allocate sequence for first frame received. + * Hold during receive handler. + * Release when final frame received. + * Keep status of last N of these for the ELS RES command. XXX TBD. + * Receive ABTS + * Deallocate sequence + * Send RJT + * Deallocate + * + * For now, we neglect conditions where only part of a sequence was + * received or transmitted, or where out-of-order receipt is detected. + */ + +/* + * Locking notes: + * + * The EM code run in a per-CPU worker thread. + * + * To protect against concurrency between a worker thread code and timers, + * sequence allocation and deallocation must be locked. + * - exchange refcnt can be done atomicly without locks. + * - sequence allocation must be locked by exch lock. + * - If the em_lock and ex_lock must be taken at the same time, then the + * em_lock must be taken before the ex_lock. + */ + +/* + * opcode names for debugging. + */ +static char *fc_exch_rctl_names[] = FC_RCTL_NAMES_INIT; + +#define FC_TABLE_SIZE(x) (sizeof(x) / sizeof(x[0])) + +static inline const char *fc_exch_name_lookup(unsigned int op, char **table, + unsigned int max_index) +{ + const char *name = NULL; + + if (op < max_index) + name = table[op]; + if (!name) + name = "unknown"; + return name; +} + +static const char *fc_exch_rctl_name(unsigned int op) +{ + return fc_exch_name_lookup(op, fc_exch_rctl_names, + FC_TABLE_SIZE(fc_exch_rctl_names)); +} + +/* + * Hold an exchange - keep it from being freed. + */ +static void fc_exch_hold(struct fc_exch *ep) +{ + atomic_inc(&ep->ex_refcnt); +} + +/* + * setup fc hdr by initializing few more FC header fields and sof/eof. + * Initialized fields by this func: + * - fh_ox_id, fh_rx_id, fh_seq_id, fh_seq_cnt + * - sof and eof + */ +static void fc_exch_setup_hdr(struct fc_exch *ep, struct fc_frame *fp, + u32 f_ctl) +{ + struct fc_frame_header *fh = fc_frame_header_get(fp); + u16 fill; + + fr_sof(fp) = ep->class; + if (ep->seq.cnt) + fr_sof(fp) = fc_sof_normal(ep->class); + + if (f_ctl & FC_FC_END_SEQ) { + fr_eof(fp) = FC_EOF_T; + if (fc_sof_needs_ack(ep->class)) + fr_eof(fp) = FC_EOF_N; + /* + * Form f_ctl. + * The number of fill bytes to make the length a 4-byte + * multiple is the low order 2-bits of the f_ctl. + * The fill itself will have been cleared by the frame + * allocation. + * After this, the length will be even, as expected by + * the transport. + */ + fill = fr_len(fp) & 3; + if (fill) { + fill = 4 - fill; + /* TODO, this may be a problem with fragmented skb */ + skb_put(fp_skb(fp), fill); + hton24(fh->fh_f_ctl, f_ctl | fill); + } + } else { + WARN_ON(fr_len(fp) % 4 != 0); /* no pad to non last frame */ + fr_eof(fp) = FC_EOF_N; + } + + /* + * Initialize remainig fh fields + * from fc_fill_fc_hdr + */ + fh->fh_ox_id = htons(ep->oxid); + fh->fh_rx_id = htons(ep->rxid); + fh->fh_seq_id = ep->seq.id; + fh->fh_seq_cnt = htons(ep->seq.cnt); +} + + +/* + * Release a reference to an exchange. + * If the refcnt goes to zero and the exchange is complete, it is freed. + */ +static void fc_exch_release(struct fc_exch *ep) +{ + struct fc_exch_mgr *mp; + + if (atomic_dec_and_test(&ep->ex_refcnt)) { + mp = ep->em; + if (ep->destructor) + ep->destructor(&ep->seq, ep->arg); + if (ep->lp->tt.exch_put) + ep->lp->tt.exch_put(ep->lp, mp, ep->xid); + WARN_ON(!ep->esb_stat & ESB_ST_COMPLETE); + mempool_free(ep, mp->ep_pool); + } +} + +static int fc_exch_done_locked(struct fc_exch *ep) +{ + int rc = 1; + + /* + * We must check for completion in case there are two threads + * tyring to complete this. But the rrq code will reuse the + * ep, and in that case we only clear the resp and set it as + * complete, so it can be reused by the timer to send the rrq. + */ + ep->resp = NULL; + if (ep->state & FC_EX_DONE) + return rc; + ep->esb_stat |= ESB_ST_COMPLETE; + + if (!(ep->esb_stat & ESB_ST_REC_QUAL)) { + ep->state |= FC_EX_DONE; + if (cancel_delayed_work(&ep->timeout_work)) + atomic_dec(&ep->ex_refcnt); /* drop hold for timer */ + rc = 0; + } + return rc; +} + +static void fc_exch_mgr_delete_ep(struct fc_exch *ep) +{ + struct fc_exch_mgr *mp; + + mp = ep->em; + spin_lock_bh(&mp->em_lock); + WARN_ON(mp->total_exches <= 0); + mp->total_exches--; + mp->exches[ep->xid - mp->min_xid] = NULL; + list_del(&ep->ex_list); + spin_unlock_bh(&mp->em_lock); + fc_exch_release(ep); /* drop hold for exch in mp */ +} + +/* + * Internal version of fc_exch_timer_set - used with lock held. + */ +static inline void fc_exch_timer_set_locked(struct fc_exch *ep, + unsigned int timer_msec) +{ + if (ep->state & (FC_EX_RST_CLEANUP | FC_EX_DONE)) + return; + + FC_DEBUG_EXCH("Exchange (%4x) timed out, notifying the upper layer\n", + ep->xid); + if (schedule_delayed_work(&ep->timeout_work, + msecs_to_jiffies(timer_msec))) + fc_exch_hold(ep); /* hold for timer */ +} + +/* + * Set timer for an exchange. + * The time is a minimum delay in milliseconds until the timer fires. + * Used for upper level protocols to time out the exchange. + * The timer is cancelled when it fires or when the exchange completes. + * Returns non-zero if a timer couldn't be allocated. + */ +static void fc_exch_timer_set(struct fc_exch *ep, unsigned int timer_msec) +{ + spin_lock_bh(&ep->ex_lock); + fc_exch_timer_set_locked(ep, timer_msec); + spin_unlock_bh(&ep->ex_lock); +} + +int fc_seq_exch_abort(const struct fc_seq *req_sp, unsigned int timer_msec) +{ + struct fc_seq *sp; + struct fc_exch *ep; + struct fc_frame *fp; + int error; + + ep = fc_seq_exch(req_sp); + + spin_lock_bh(&ep->ex_lock); + if (ep->esb_stat & (ESB_ST_COMPLETE | ESB_ST_ABNORMAL) || + ep->state & (FC_EX_DONE | FC_EX_RST_CLEANUP)) { + spin_unlock_bh(&ep->ex_lock); + return -ENXIO; + } + + /* + * Send the abort on a new sequence if possible. + */ + sp = fc_seq_start_next_locked(&ep->seq); + if (!sp) { + spin_unlock_bh(&ep->ex_lock); + return -ENOMEM; + } + + ep->esb_stat |= ESB_ST_SEQ_INIT | ESB_ST_ABNORMAL; + if (timer_msec) + fc_exch_timer_set_locked(ep, timer_msec); + spin_unlock_bh(&ep->ex_lock); + + /* + * If not logged into the fabric, don't send ABTS but leave + * sequence active until next timeout. + */ + if (!ep->sid) + return 0; + + /* + * Send an abort for the sequence that timed out. + */ + fp = fc_frame_alloc(ep->lp, 0); + if (fp) { + fc_fill_fc_hdr(fp, FC_RCTL_BA_ABTS, ep->did, ep->sid, + FC_TYPE_BLS, FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0); + error = fc_seq_send(ep->lp, sp, fp); + } else + error = -ENOBUFS; + return error; +} +EXPORT_SYMBOL(fc_seq_exch_abort); + +/* + * Exchange timeout - handle exchange timer expiration. + * The timer will have been cancelled before this is called. + */ +static void fc_exch_timeout(struct work_struct *work) +{ + struct fc_exch *ep = container_of(work, struct fc_exch, + timeout_work.work); + struct fc_seq *sp = &ep->seq; + void (*resp)(struct fc_seq *, struct fc_frame *fp, void *arg); + void *arg; + u32 e_stat; + int rc = 1; + + spin_lock_bh(&ep->ex_lock); + if (ep->state & (FC_EX_RST_CLEANUP | FC_EX_DONE)) + goto unlock; + + e_stat = ep->esb_stat; + if (e_stat & ESB_ST_COMPLETE) { + ep->esb_stat = e_stat & ~ESB_ST_REC_QUAL; + if (e_stat & ESB_ST_REC_QUAL) + fc_exch_rrq(ep); + spin_unlock_bh(&ep->ex_lock); + goto done; + } else { + resp = ep->resp; + arg = ep->arg; + ep->resp = NULL; + if (e_stat & ESB_ST_ABNORMAL) + rc = fc_exch_done_locked(ep); + spin_unlock_bh(&ep->ex_lock); + if (!rc) + fc_exch_mgr_delete_ep(ep); + if (resp) + resp(sp, ERR_PTR(-FC_EX_TIMEOUT), arg); + fc_seq_exch_abort(sp, 2 * ep->r_a_tov); + goto done; + } +unlock: + spin_unlock_bh(&ep->ex_lock); +done: + /* + * This release matches the hold taken when the timer was set. + */ + fc_exch_release(ep); +} + +/* + * Allocate a sequence. + * + * We don't support multiple originated sequences on the same exchange. + * By implication, any previously originated sequence on this exchange + * is complete, and we reallocate the same sequence. + */ +static struct fc_seq *fc_seq_alloc(struct fc_exch *ep, u8 seq_id) +{ + struct fc_seq *sp; + + sp = &ep->seq; + sp->ssb_stat = 0; + sp->cnt = 0; + sp->id = seq_id; + return sp; +} + +/* + * fc_em_alloc_xid - returns an xid based on request type + * @lp : ptr to associated lport + * @fp : ptr to the assocated frame + * + * check the associated fc_fsp_pkt to get scsi command type and + * command direction to decide from which range this exch id + * will be allocated from. + * + * Returns : 0 or an valid xid + */ +static u16 fc_em_alloc_xid(struct fc_exch_mgr *mp, const struct fc_frame *fp) +{ + u16 xid, min, max; + u16 *plast; + struct fc_exch *ep = NULL; + + if (mp->max_read) { + if (fc_frame_is_read(fp)) { + min = mp->min_xid; + max = mp->max_read; + plast = &mp->last_read; + } else { + min = mp->max_read + 1; + max = mp->max_xid; + plast = &mp->last_xid; + } + } else { + min = mp->min_xid; + max = mp->max_xid; + plast = &mp->last_xid; + } + xid = *plast; + do { + xid = (xid == max) ? min : xid + 1; + ep = mp->exches[xid - mp->min_xid]; + } while ((ep != NULL) && (xid != *plast)); + + if (unlikely(ep)) + xid = 0; + else + *plast = xid; + + return xid; +} + +/* + * fc_exch_alloc - allocate an exchange. + * @mp : ptr to the exchange manager + * @xid: input xid + * + * if xid is supplied zero then assign next free exchange ID + * from exchange manager, otherwise use supplied xid. + * Returns with exch lock held. + */ +struct fc_exch *fc_exch_alloc(struct fc_exch_mgr *mp, + struct fc_frame *fp, u16 xid) +{ + struct fc_exch *ep; + + /* allocate memory for exchange */ + ep = mempool_alloc(mp->ep_pool, GFP_ATOMIC); + if (!ep) { + atomic_inc(&mp->stats.no_free_exch); + goto out; + } + memset(ep, 0, sizeof(*ep)); + + spin_lock_bh(&mp->em_lock); + /* alloc xid if input xid 0 */ + if (!xid) { + /* alloc a new xid */ + xid = fc_em_alloc_xid(mp, fp); + if (!xid) { + printk(KERN_ERR "fc_em_alloc_xid() failed\n"); + goto err; + } + } + + fc_exch_hold(ep); /* hold for exch in mp */ + spin_lock_init(&ep->ex_lock); + /* + * Hold exch lock for caller to prevent fc_exch_reset() + * from releasing exch while fc_exch_alloc() caller is + * still working on exch. + */ + spin_lock_bh(&ep->ex_lock); + + mp->exches[xid - mp->min_xid] = ep; + list_add_tail(&ep->ex_list, &mp->ex_list); + fc_seq_alloc(ep, ep->seq_id++); + mp->total_exches++; + spin_unlock_bh(&mp->em_lock); + + /* + * update exchange + */ + ep->oxid = ep->xid = xid; + ep->em = mp; + ep->lp = mp->lp; + ep->f_ctl = FC_FC_FIRST_SEQ; /* next seq is first seq */ + ep->rxid = FC_XID_UNKNOWN; + ep->class = mp->class; + INIT_DELAYED_WORK(&ep->timeout_work, fc_exch_timeout); +out: + return ep; +err: + spin_unlock_bh(&mp->em_lock); + atomic_inc(&mp->stats.no_free_exch_xid); + mempool_free(ep, mp->ep_pool); + return NULL; +} +EXPORT_SYMBOL(fc_exch_alloc); + +/* + * Lookup and hold an exchange. + */ +static struct fc_exch *fc_exch_find(struct fc_exch_mgr *mp, u16 xid) +{ + struct fc_exch *ep = NULL; + + if ((xid >= mp->min_xid) && (xid <= mp->max_xid)) { + spin_lock_bh(&mp->em_lock); + ep = mp->exches[xid - mp->min_xid]; + if (ep) { + fc_exch_hold(ep); + WARN_ON(ep->xid != xid); + } + spin_unlock_bh(&mp->em_lock); + } + return ep; +} + +void fc_exch_done(struct fc_seq *sp) +{ + struct fc_exch *ep = fc_seq_exch(sp); + int rc; + + spin_lock_bh(&ep->ex_lock); + rc = fc_exch_done_locked(ep); + spin_unlock_bh(&ep->ex_lock); + if (!rc) + fc_exch_mgr_delete_ep(ep); +} +EXPORT_SYMBOL(fc_exch_done); + +/* + * Allocate a new exchange as responder. + * Sets the responder ID in the frame header. + */ +static struct fc_exch *fc_exch_resp(struct fc_exch_mgr *mp, struct fc_frame *fp) +{ + struct fc_exch *ep; + struct fc_frame_header *fh; + u16 rxid; + + ep = mp->lp->tt.exch_get(mp->lp, fp); + if (ep) { + ep->class = fc_frame_class(fp); + + /* + * Set EX_CTX indicating we're responding on this exchange. + */ + ep->f_ctl |= FC_FC_EX_CTX; /* we're responding */ + ep->f_ctl &= ~FC_FC_FIRST_SEQ; /* not new */ + fh = fc_frame_header_get(fp); + ep->sid = ntoh24(fh->fh_d_id); + ep->did = ntoh24(fh->fh_s_id); + ep->oid = ep->did; + + /* + * Allocated exchange has placed the XID in the + * originator field. Move it to the responder field, + * and set the originator XID from the frame. + */ + ep->rxid = ep->xid; + ep->oxid = ntohs(fh->fh_ox_id); + ep->esb_stat |= ESB_ST_RESP | ESB_ST_SEQ_INIT; + if ((ntoh24(fh->fh_f_ctl) & FC_FC_SEQ_INIT) == 0) + ep->esb_stat &= ~ESB_ST_SEQ_INIT; + + /* + * Set the responder ID in the frame header. + * The old one should've been 0xffff. + * If it isn't, don't assign one. + * Incoming basic link service frames may specify + * a referenced RX_ID. + */ + if (fh->fh_type != FC_TYPE_BLS) { + rxid = ntohs(fh->fh_rx_id); + WARN_ON(rxid != FC_XID_UNKNOWN); + fh->fh_rx_id = htons(ep->rxid); + } + fc_exch_hold(ep); /* hold for caller */ + spin_unlock_bh(&ep->ex_lock); /* lock from exch_get */ + } + return ep; +} + +/* + * Find a sequence for receive where the other end is originating the sequence. + * If fc_pf_rjt_reason is FC_RJT_NONE then this function will have a hold + * on the ep that should be released by the caller. + */ +static enum fc_pf_rjt_reason +fc_seq_lookup_recip(struct fc_exch_mgr *mp, struct fc_frame *fp) +{ + struct fc_frame_header *fh = fc_frame_header_get(fp); + struct fc_exch *ep = NULL; + struct fc_seq *sp = NULL; + enum fc_pf_rjt_reason reject = FC_RJT_NONE; + u32 f_ctl; + u16 xid; + + f_ctl = ntoh24(fh->fh_f_ctl); + WARN_ON((f_ctl & FC_FC_SEQ_CTX) != 0); + + /* + * Lookup or create the exchange if we will be creating the sequence. + */ + if (f_ctl & FC_FC_EX_CTX) { + xid = ntohs(fh->fh_ox_id); /* we originated exch */ + ep = fc_exch_find(mp, xid); + if (!ep) { + atomic_inc(&mp->stats.xid_not_found); + reject = FC_RJT_OX_ID; + goto out; + } + if (ep->rxid == FC_XID_UNKNOWN) + ep->rxid = ntohs(fh->fh_rx_id); + else if (ep->rxid != ntohs(fh->fh_rx_id)) { + reject = FC_RJT_OX_ID; + goto rel; + } + } else { + xid = ntohs(fh->fh_rx_id); /* we are the responder */ + + /* + * Special case for MDS issuing an ELS TEST with a + * bad rxid of 0. + * XXX take this out once we do the proper reject. + */ + if (xid == 0 && fh->fh_r_ctl == FC_RCTL_ELS_REQ && + fc_frame_payload_op(fp) == ELS_TEST) { + fh->fh_rx_id = htons(FC_XID_UNKNOWN); + xid = FC_XID_UNKNOWN; + } + + /* + * new sequence - find the exchange + */ + ep = fc_exch_find(mp, xid); + if ((f_ctl & FC_FC_FIRST_SEQ) && fc_sof_is_init(fr_sof(fp))) { + if (ep) { + atomic_inc(&mp->stats.xid_busy); + reject = FC_RJT_RX_ID; + goto rel; + } + ep = fc_exch_resp(mp, fp); + if (!ep) { + reject = FC_RJT_EXCH_EST; /* XXX */ + goto out; + } + xid = ep->xid; /* get our XID */ + } else if (!ep) { + atomic_inc(&mp->stats.xid_not_found); + reject = FC_RJT_RX_ID; /* XID not found */ + goto out; + } + } + + /* + * At this point, we have the exchange held. + * Find or create the sequence. + */ + if (fc_sof_is_init(fr_sof(fp))) { + sp = fc_seq_start_next(&ep->seq); + if (!sp) { + reject = FC_RJT_SEQ_XS; /* exchange shortage */ + goto rel; + } + sp->id = fh->fh_seq_id; + sp->ssb_stat |= SSB_ST_RESP; + } else { + sp = &ep->seq; + if (sp->id != fh->fh_seq_id) { + atomic_inc(&mp->stats.seq_not_found); + reject = FC_RJT_SEQ_ID; /* sequence/exch should exist */ + goto rel; + } + } + WARN_ON(ep != fc_seq_exch(sp)); + + if (f_ctl & FC_FC_SEQ_INIT) + ep->esb_stat |= ESB_ST_SEQ_INIT; + + fr_seq(fp) = sp; +out: + return reject; +rel: + fc_exch_done(&ep->seq); + fc_exch_release(ep); /* hold from fc_exch_find/fc_exch_resp */ + return reject; +} + +/* + * Find the sequence for a frame being received. + * We originated the sequence, so it should be found. + * We may or may not have originated the exchange. + * Does not hold the sequence for the caller. + */ +static struct fc_seq *fc_seq_lookup_orig(struct fc_exch_mgr *mp, + struct fc_frame *fp) +{ + struct fc_frame_header *fh = fc_frame_header_get(fp); + struct fc_exch *ep; + struct fc_seq *sp = NULL; + u32 f_ctl; + u16 xid; + + f_ctl = ntoh24(fh->fh_f_ctl); + WARN_ON((f_ctl & FC_FC_SEQ_CTX) != FC_FC_SEQ_CTX); + xid = ntohs((f_ctl & FC_FC_EX_CTX) ? fh->fh_ox_id : fh->fh_rx_id); + ep = fc_exch_find(mp, xid); + if (!ep) + return NULL; + if (ep->seq.id == fh->fh_seq_id) { + /* + * Save the RX_ID if we didn't previously know it. + */ + sp = &ep->seq; + if ((f_ctl & FC_FC_EX_CTX) != 0 && + ep->rxid == FC_XID_UNKNOWN) { + ep->rxid = ntohs(fh->fh_rx_id); + } + } + fc_exch_release(ep); + return sp; +} + +/* + * Set addresses for an exchange. + * Note this must be done before the first sequence of the exchange is sent. + */ +static void fc_exch_set_addr(struct fc_exch *ep, + u32 orig_id, u32 resp_id) +{ + ep->oid = orig_id; + if (ep->esb_stat & ESB_ST_RESP) { + ep->sid = resp_id; + ep->did = orig_id; + } else { + ep->sid = orig_id; + ep->did = resp_id; + } +} + +static struct fc_seq *fc_seq_start_next_locked(struct fc_seq *sp) +{ + struct fc_exch *ep = fc_seq_exch(sp); + + sp = fc_seq_alloc(ep, ep->seq_id++); + FC_DEBUG_EXCH("exch %4x f_ctl %6x seq %2x\n", + ep->xid, ep->f_ctl, sp->id); + return sp; +} +/* + * Allocate a new sequence on the same exchange as the supplied sequence. + * This will never return NULL. + */ +struct fc_seq *fc_seq_start_next(struct fc_seq *sp) +{ + struct fc_exch *ep = fc_seq_exch(sp); + + spin_lock_bh(&ep->ex_lock); + WARN_ON((ep->esb_stat & ESB_ST_COMPLETE) != 0); + sp = fc_seq_start_next_locked(sp); + spin_unlock_bh(&ep->ex_lock); + + return sp; +} +EXPORT_SYMBOL(fc_seq_start_next); + +int fc_seq_send(struct fc_lport *lp, struct fc_seq *sp, struct fc_frame *fp) +{ + struct fc_exch *ep; + struct fc_frame_header *fh = fc_frame_header_get(fp); + int error; + u32 f_ctl; + + ep = fc_seq_exch(sp); + WARN_ON((ep->esb_stat & ESB_ST_SEQ_INIT) != ESB_ST_SEQ_INIT); + + f_ctl = ntoh24(fh->fh_f_ctl); + fc_exch_setup_hdr(ep, fp, f_ctl); + + /* + * update sequence count if this frame is carrying + * multiple FC frames when sequence offload is enabled + * by LLD. + */ + if (fr_max_payload(fp)) + sp->cnt += DIV_ROUND_UP((fr_len(fp) - sizeof(*fh)), + fr_max_payload(fp)); + else + sp->cnt++; + + /* + * Send the frame. + */ + error = lp->tt.frame_send(lp, fp); + + /* + * Update the exchange and sequence flags, + * assuming all frames for the sequence have been sent. + * We can only be called to send once for each sequence. + */ + spin_lock_bh(&ep->ex_lock); + ep->f_ctl = f_ctl & ~FC_FC_FIRST_SEQ; /* not first seq */ + if (f_ctl & (FC_FC_END_SEQ | FC_FC_SEQ_INIT)) + ep->esb_stat &= ~ESB_ST_SEQ_INIT; + spin_unlock_bh(&ep->ex_lock); + return error; +} +EXPORT_SYMBOL(fc_seq_send); + +void fc_seq_els_rsp_send(struct fc_seq *sp, enum fc_els_cmd els_cmd, + struct fc_seq_els_data *els_data) +{ + switch (els_cmd) { + case ELS_LS_RJT: + fc_seq_ls_rjt(sp, els_data->reason, els_data->explan); + break; + case ELS_LS_ACC: + fc_seq_ls_acc(sp); + break; + case ELS_RRQ: + fc_exch_els_rrq(sp, els_data->fp); + break; + case ELS_REC: + fc_exch_els_rec(sp, els_data->fp); + break; + default: + FC_DBG("Invalid ELS CMD:%x\n", els_cmd); + } +} +EXPORT_SYMBOL(fc_seq_els_rsp_send); + +/* + * Send a sequence, which is also the last sequence in the exchange. + */ +static void fc_seq_send_last(struct fc_seq *sp, struct fc_frame *fp, + enum fc_rctl rctl, enum fc_fh_type fh_type) +{ + u32 f_ctl; + struct fc_exch *ep = fc_seq_exch(sp); + + f_ctl = FC_FC_LAST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT; + f_ctl |= ep->f_ctl; + fc_fill_fc_hdr(fp, rctl, ep->did, ep->sid, fh_type, f_ctl, 0); + fc_seq_send(ep->lp, sp, fp); +} + +/* + * Send ACK_1 (or equiv.) indicating we received something. + * The frame we're acking is supplied. + */ +static void fc_seq_send_ack(struct fc_seq *sp, const struct fc_frame *rx_fp) +{ + struct fc_frame *fp; + struct fc_frame_header *rx_fh; + struct fc_frame_header *fh; + struct fc_exch *ep = fc_seq_exch(sp); + struct fc_lport *lp = ep->lp; + unsigned int f_ctl; + + /* + * Don't send ACKs for class 3. + */ + if (fc_sof_needs_ack(fr_sof(rx_fp))) { + fp = fc_frame_alloc(lp, 0); + if (!fp) + return; + + fh = fc_frame_header_get(fp); + fh->fh_r_ctl = FC_RCTL_ACK_1; + fh->fh_type = FC_TYPE_BLS; + + /* + * Form f_ctl by inverting EX_CTX and SEQ_CTX (bits 23, 22). + * Echo FIRST_SEQ, LAST_SEQ, END_SEQ, END_CONN, SEQ_INIT. + * Bits 9-8 are meaningful (retransmitted or unidirectional). + * Last ACK uses bits 7-6 (continue sequence), + * bits 5-4 are meaningful (what kind of ACK to use). + */ + rx_fh = fc_frame_header_get(rx_fp); + f_ctl = ntoh24(rx_fh->fh_f_ctl); + f_ctl &= FC_FC_EX_CTX | FC_FC_SEQ_CTX | + FC_FC_FIRST_SEQ | FC_FC_LAST_SEQ | + FC_FC_END_SEQ | FC_FC_END_CONN | FC_FC_SEQ_INIT | + FC_FC_RETX_SEQ | FC_FC_UNI_TX; + f_ctl ^= FC_FC_EX_CTX | FC_FC_SEQ_CTX; + hton24(fh->fh_f_ctl, f_ctl); + + fc_exch_setup_hdr(ep, fp, f_ctl); + fh->fh_seq_id = rx_fh->fh_seq_id; + fh->fh_seq_cnt = rx_fh->fh_seq_cnt; + fh->fh_parm_offset = htonl(1); /* ack single frame */ + + fr_sof(fp) = fr_sof(rx_fp); + if (f_ctl & FC_FC_END_SEQ) + fr_eof(fp) = FC_EOF_T; + else + fr_eof(fp) = FC_EOF_N; + + (void) lp->tt.frame_send(lp, fp); + } +} + +/* + * Send BLS Reject. + * This is for rejecting BA_ABTS only. + */ +static void +fc_exch_send_ba_rjt(struct fc_frame *rx_fp, enum fc_ba_rjt_reason reason, + enum fc_ba_rjt_explan explan) +{ + struct fc_frame *fp; + struct fc_frame_header *rx_fh; + struct fc_frame_header *fh; + struct fc_ba_rjt *rp; + struct fc_lport *lp; + unsigned int f_ctl; + + lp = fr_dev(rx_fp); + fp = fc_frame_alloc(lp, sizeof(*rp)); + if (!fp) + return; + fh = fc_frame_header_get(fp); + rx_fh = fc_frame_header_get(rx_fp); + + memset(fh, 0, sizeof(*fh) + sizeof(*rp)); + + rp = fc_frame_payload_get(fp, sizeof(*rp)); + rp->br_reason = reason; + rp->br_explan = explan; + + /* + * seq_id, cs_ctl, df_ctl and param/offset are zero. + */ + memcpy(fh->fh_s_id, rx_fh->fh_d_id, 3); + memcpy(fh->fh_d_id, rx_fh->fh_s_id, 3); + fh->fh_ox_id = rx_fh->fh_rx_id; + fh->fh_rx_id = rx_fh->fh_ox_id; + fh->fh_seq_cnt = rx_fh->fh_seq_cnt; + fh->fh_r_ctl = FC_RCTL_BA_RJT; + fh->fh_type = FC_TYPE_BLS; + + /* + * Form f_ctl by inverting EX_CTX and SEQ_CTX (bits 23, 22). + * Echo FIRST_SEQ, LAST_SEQ, END_SEQ, END_CONN, SEQ_INIT. + * Bits 9-8 are meaningful (retransmitted or unidirectional). + * Last ACK uses bits 7-6 (continue sequence), + * bits 5-4 are meaningful (what kind of ACK to use). + * Always set LAST_SEQ, END_SEQ. + */ + f_ctl = ntoh24(rx_fh->fh_f_ctl); + f_ctl &= FC_FC_EX_CTX | FC_FC_SEQ_CTX | + FC_FC_END_CONN | FC_FC_SEQ_INIT | + FC_FC_RETX_SEQ | FC_FC_UNI_TX; + f_ctl ^= FC_FC_EX_CTX | FC_FC_SEQ_CTX; + f_ctl |= FC_FC_LAST_SEQ | FC_FC_END_SEQ; + f_ctl &= ~FC_FC_FIRST_SEQ; + hton24(fh->fh_f_ctl, f_ctl); + + fr_sof(fp) = fc_sof_class(fr_sof(rx_fp)); + fr_eof(fp) = FC_EOF_T; + if (fc_sof_needs_ack(fr_sof(fp))) + fr_eof(fp) = FC_EOF_N; + + (void) lp->tt.frame_send(lp, fp); +} + +/* + * Handle an incoming ABTS. This would be for target mode usually, + * but could be due to lost FCP transfer ready, confirm or RRQ. + * We always handle this as an exchange abort, ignoring the parameter. + */ +static void fc_exch_recv_abts(struct fc_exch *ep, struct fc_frame *rx_fp) +{ + struct fc_frame *fp; + struct fc_ba_acc *ap; + struct fc_frame_header *fh; + struct fc_seq *sp; + + if (!ep) + goto reject; + spin_lock_bh(&ep->ex_lock); + if (ep->esb_stat & ESB_ST_COMPLETE) { + spin_unlock_bh(&ep->ex_lock); + goto reject; + } + if (!(ep->esb_stat & ESB_ST_REC_QUAL)) + fc_exch_hold(ep); /* hold for REC_QUAL */ + ep->esb_stat |= ESB_ST_ABNORMAL | ESB_ST_REC_QUAL; + fc_exch_timer_set_locked(ep, ep->r_a_tov); + + fp = fc_frame_alloc(ep->lp, sizeof(*ap)); + if (!fp) { + spin_unlock_bh(&ep->ex_lock); + goto free; + } + fh = fc_frame_header_get(fp); + ap = fc_frame_payload_get(fp, sizeof(*ap)); + memset(ap, 0, sizeof(*ap)); + sp = &ep->seq; + ap->ba_high_seq_cnt = htons(0xffff); + if (sp->ssb_stat & SSB_ST_RESP) { + ap->ba_seq_id = sp->id; + ap->ba_seq_id_val = FC_BA_SEQ_ID_VAL; + ap->ba_high_seq_cnt = fh->fh_seq_cnt; + ap->ba_low_seq_cnt = htons(sp->cnt); + } + sp = fc_seq_start_next(sp); + spin_unlock_bh(&ep->ex_lock); + fc_seq_send_last(sp, fp, FC_RCTL_BA_ACC, FC_TYPE_BLS); + fc_frame_free(rx_fp); + return; + +reject: + fc_exch_send_ba_rjt(rx_fp, FC_BA_RJT_UNABLE, FC_BA_RJT_INV_XID); +free: + fc_frame_free(rx_fp); +} + +/* + * Handle receive where the other end is originating the sequence. + */ +static void fc_exch_recv_req(struct fc_lport *lp, struct fc_exch_mgr *mp, + struct fc_frame *fp) +{ + struct fc_frame_header *fh = fc_frame_header_get(fp); + struct fc_seq *sp = NULL; + struct fc_exch *ep = NULL; + enum fc_sof sof; + enum fc_eof eof; + u32 f_ctl; + enum fc_pf_rjt_reason reject; + + fr_seq(fp) = NULL; + reject = fc_seq_lookup_recip(mp, fp); + if (reject == FC_RJT_NONE) { + sp = fr_seq(fp); /* sequence will be held */ + ep = fc_seq_exch(sp); + sof = fr_sof(fp); + eof = fr_eof(fp); + f_ctl = ntoh24(fh->fh_f_ctl); + fc_seq_send_ack(sp, fp); + + /* + * Call the receive function. + * + * The receive function may allocate a new sequence + * over the old one, so we shouldn't change the + * sequence after this. + * + * The frame will be freed by the receive function. + * If new exch resp handler is valid then call that + * first. + */ + if (ep->resp) + ep->resp(sp, fp, ep->arg); + else + lp->tt.lport_recv(lp, sp, fp); + fc_exch_release(ep); /* release from lookup */ + } else { + FC_DEBUG_EXCH("exch/seq lookup failed: reject %x\n", reject); + fc_frame_free(fp); + } +} + +/* + * Handle receive where the other end is originating the sequence in + * response to our exchange. + */ +static void fc_exch_recv_seq_resp(struct fc_exch_mgr *mp, struct fc_frame *fp) +{ + struct fc_frame_header *fh = fc_frame_header_get(fp); + struct fc_seq *sp; + struct fc_exch *ep; + enum fc_sof sof; + u32 f_ctl; + void (*resp)(struct fc_seq *, struct fc_frame *fp, void *arg); + void *ex_resp_arg; + int rc; + + ep = fc_exch_find(mp, ntohs(fh->fh_ox_id)); + if (!ep) { + atomic_inc(&mp->stats.xid_not_found); + goto out; + } + if (ep->rxid == FC_XID_UNKNOWN) + ep->rxid = ntohs(fh->fh_rx_id); + if (ep->sid != 0 && ep->sid != ntoh24(fh->fh_d_id)) { + atomic_inc(&mp->stats.xid_not_found); + goto rel; + } + if (ep->did != ntoh24(fh->fh_s_id) && + ep->did != FC_FID_FLOGI) { + atomic_inc(&mp->stats.xid_not_found); + goto rel; + } + sof = fr_sof(fp); + if (fc_sof_is_init(sof)) { + sp = fc_seq_start_next(&ep->seq); + sp->id = fh->fh_seq_id; + sp->ssb_stat |= SSB_ST_RESP; + } else { + sp = &ep->seq; + if (sp->id != fh->fh_seq_id) { + atomic_inc(&mp->stats.seq_not_found); + goto rel; + } + } + f_ctl = ntoh24(fh->fh_f_ctl); + fr_seq(fp) = sp; + if (f_ctl & FC_FC_SEQ_INIT) + ep->esb_stat |= ESB_ST_SEQ_INIT; + + if (fc_sof_needs_ack(sof)) + fc_seq_send_ack(sp, fp); + resp = ep->resp; + ex_resp_arg = ep->arg; + + if (fh->fh_type != FC_TYPE_FCP && fr_eof(fp) == FC_EOF_T && + (f_ctl & (FC_FC_LAST_SEQ | FC_FC_END_SEQ)) == + (FC_FC_LAST_SEQ | FC_FC_END_SEQ)) { + spin_lock_bh(&ep->ex_lock); + rc = fc_exch_done_locked(ep); + WARN_ON(fc_seq_exch(sp) != ep); + spin_unlock_bh(&ep->ex_lock); + if (!rc) + fc_exch_mgr_delete_ep(ep); + } + + /* + * Call the receive function. + * The sequence is held (has a refcnt) for us, + * but not for the receive function. + * + * The receive function may allocate a new sequence + * over the old one, so we shouldn't change the + * sequence after this. + * + * The frame will be freed by the receive function. + * If new exch resp handler is valid then call that + * first. + */ + if (resp) + resp(sp, fp, ex_resp_arg); + else + fc_frame_free(fp); + fc_exch_release(ep); + return; +rel: + fc_exch_release(ep); +out: + fc_frame_free(fp); +} + +/* + * Handle receive for a sequence where other end is responding to our sequence. + */ +static void fc_exch_recv_resp(struct fc_exch_mgr *mp, struct fc_frame *fp) +{ + struct fc_seq *sp; + + sp = fc_seq_lookup_orig(mp, fp); /* doesn't hold sequence */ + if (!sp) { + atomic_inc(&mp->stats.xid_not_found); + FC_DEBUG_EXCH("seq lookup failed\n"); + } else { + atomic_inc(&mp->stats.non_bls_resp); + FC_DEBUG_EXCH("non-BLS response to sequence"); + } + fc_frame_free(fp); +} + +/* + * Handle the response to an ABTS for exchange or sequence. + * This can be BA_ACC or BA_RJT. + */ +static void fc_exch_abts_resp(struct fc_exch *ep, struct fc_frame *fp) +{ + void (*resp)(struct fc_seq *, struct fc_frame *fp, void *arg); + void *ex_resp_arg; + struct fc_frame_header *fh; + struct fc_ba_acc *ap; + struct fc_seq *sp; + u16 low; + u16 high; + int rc = 1, has_rec = 0; + + fh = fc_frame_header_get(fp); + FC_DEBUG_EXCH("exch: BLS rctl %x - %s\n", + fh->fh_r_ctl, fc_exch_rctl_name(fh->fh_r_ctl)); + + if (cancel_delayed_work_sync(&ep->timeout_work)) + fc_exch_release(ep); /* release from pending timer hold */ + + spin_lock_bh(&ep->ex_lock); + switch (fh->fh_r_ctl) { + case FC_RCTL_BA_ACC: + ap = fc_frame_payload_get(fp, sizeof(*ap)); + if (!ap) + break; + + /* + * Decide whether to establish a Recovery Qualifier. + * We do this if there is a non-empty SEQ_CNT range and + * SEQ_ID is the same as the one we aborted. + */ + low = ntohs(ap->ba_low_seq_cnt); + high = ntohs(ap->ba_high_seq_cnt); + if ((ep->esb_stat & ESB_ST_REC_QUAL) == 0 && + (ap->ba_seq_id_val != FC_BA_SEQ_ID_VAL || + ap->ba_seq_id == ep->seq_id) && low != high) { + ep->esb_stat |= ESB_ST_REC_QUAL; + fc_exch_hold(ep); /* hold for recovery qualifier */ + has_rec = 1; + } + break; + case FC_RCTL_BA_RJT: + break; + default: + break; + } + + resp = ep->resp; + ex_resp_arg = ep->arg; + + /* do we need to do some other checks here. Can we reuse more of + * fc_exch_recv_seq_resp + */ + sp = &ep->seq; + /* + * do we want to check END_SEQ as well as LAST_SEQ here? + */ + if (ep->fh_type != FC_TYPE_FCP && + ntoh24(fh->fh_f_ctl) & FC_FC_LAST_SEQ) + rc = fc_exch_done_locked(ep); + spin_unlock_bh(&ep->ex_lock); + if (!rc) + fc_exch_mgr_delete_ep(ep); + + if (resp) + resp(sp, fp, ex_resp_arg); + else + fc_frame_free(fp); + + if (has_rec) + fc_exch_timer_set(ep, ep->r_a_tov); + +} + +/* + * Receive BLS sequence. + * This is always a sequence initiated by the remote side. + * We may be either the originator or recipient of the exchange. + */ +static void fc_exch_recv_bls(struct fc_exch_mgr *mp, struct fc_frame *fp) +{ + struct fc_frame_header *fh; + struct fc_exch *ep; + u32 f_ctl; + + fh = fc_frame_header_get(fp); + f_ctl = ntoh24(fh->fh_f_ctl); + fr_seq(fp) = NULL; + + ep = fc_exch_find(mp, (f_ctl & FC_FC_EX_CTX) ? + ntohs(fh->fh_ox_id) : ntohs(fh->fh_rx_id)); + if (ep && (f_ctl & FC_FC_SEQ_INIT)) { + spin_lock_bh(&ep->ex_lock); + ep->esb_stat |= ESB_ST_SEQ_INIT; + spin_unlock_bh(&ep->ex_lock); + } + if (f_ctl & FC_FC_SEQ_CTX) { + /* + * A response to a sequence we initiated. + * This should only be ACKs for class 2 or F. + */ + switch (fh->fh_r_ctl) { + case FC_RCTL_ACK_1: + case FC_RCTL_ACK_0: + break; + default: + FC_DEBUG_EXCH("BLS rctl %x - %s received", + fh->fh_r_ctl, + fc_exch_rctl_name(fh->fh_r_ctl)); + break; + } + fc_frame_free(fp); + } else { + switch (fh->fh_r_ctl) { + case FC_RCTL_BA_RJT: + case FC_RCTL_BA_ACC: + if (ep) + fc_exch_abts_resp(ep, fp); + else + fc_frame_free(fp); + break; + case FC_RCTL_BA_ABTS: + fc_exch_recv_abts(ep, fp); + break; + default: /* ignore junk */ + fc_frame_free(fp); + break; + } + } + if (ep) + fc_exch_release(ep); /* release hold taken by fc_exch_find */ +} + +/* + * Accept sequence with LS_ACC. + * If this fails due to allocation or transmit congestion, assume the + * originator will repeat the sequence. + */ +static void fc_seq_ls_acc(struct fc_seq *req_sp) +{ + struct fc_seq *sp; + struct fc_els_ls_acc *acc; + struct fc_frame *fp; + + sp = fc_seq_start_next(req_sp); + fp = fc_frame_alloc(fc_seq_exch(sp)->lp, sizeof(*acc)); + if (fp) { + acc = fc_frame_payload_get(fp, sizeof(*acc)); + memset(acc, 0, sizeof(*acc)); + acc->la_cmd = ELS_LS_ACC; + fc_seq_send_last(sp, fp, FC_RCTL_ELS_REP, FC_TYPE_ELS); + } +} + +/* + * Reject sequence with ELS LS_RJT. + * If this fails due to allocation or transmit congestion, assume the + * originator will repeat the sequence. + */ +static void fc_seq_ls_rjt(struct fc_seq *req_sp, enum fc_els_rjt_reason reason, + enum fc_els_rjt_explan explan) +{ + struct fc_seq *sp; + struct fc_els_ls_rjt *rjt; + struct fc_frame *fp; + + sp = fc_seq_start_next(req_sp); + fp = fc_frame_alloc(fc_seq_exch(sp)->lp, sizeof(*rjt)); + if (fp) { + rjt = fc_frame_payload_get(fp, sizeof(*rjt)); + memset(rjt, 0, sizeof(*rjt)); + rjt->er_cmd = ELS_LS_RJT; + rjt->er_reason = reason; + rjt->er_explan = explan; + fc_seq_send_last(sp, fp, FC_RCTL_ELS_REP, FC_TYPE_ELS); + } +} + +static void fc_exch_reset(struct fc_exch *ep) +{ + struct fc_seq *sp; + void (*resp)(struct fc_seq *, struct fc_frame *, void *); + void *arg; + int rc = 1; + + spin_lock_bh(&ep->ex_lock); + ep->state |= FC_EX_RST_CLEANUP; + /* + * we really want to call del_timer_sync, but cannot due + * to the lport calling with the lport lock held (some resp + * functions can also grab the lport lock which could cause + * a deadlock). + */ + if (cancel_delayed_work(&ep->timeout_work)) + atomic_dec(&ep->ex_refcnt); /* drop hold for timer */ + resp = ep->resp; + ep->resp = NULL; + if (ep->esb_stat & ESB_ST_REC_QUAL) + atomic_dec(&ep->ex_refcnt); /* drop hold for rec_qual */ + ep->esb_stat &= ~ESB_ST_REC_QUAL; + arg = ep->arg; + sp = &ep->seq; + rc = fc_exch_done_locked(ep); + spin_unlock_bh(&ep->ex_lock); + if (!rc) + fc_exch_mgr_delete_ep(ep); + + if (resp) + resp(sp, ERR_PTR(-FC_EX_CLOSED), arg); +} + +/* + * Reset an exchange manager, releasing all sequences and exchanges. + * If sid is non-zero, reset only exchanges we source from that FID. + * If did is non-zero, reset only exchanges destined to that FID. + */ +void fc_exch_mgr_reset(struct fc_exch_mgr *mp, u32 sid, u32 did) +{ + struct fc_exch *ep; + struct fc_exch *next; + + spin_lock_bh(&mp->em_lock); +restart: + list_for_each_entry_safe(ep, next, &mp->ex_list, ex_list) { + if ((sid == 0 || sid == ep->sid) && + (did == 0 || did == ep->did)) { + fc_exch_hold(ep); + spin_unlock_bh(&mp->em_lock); + + fc_exch_reset(ep); + + fc_exch_release(ep); + spin_lock_bh(&mp->em_lock); + + /* + * must restart loop incase while lock was down + * multiple eps were released. + */ + goto restart; + } + } + spin_unlock_bh(&mp->em_lock); +} +EXPORT_SYMBOL(fc_exch_mgr_reset); + +/* + * Handle incoming ELS REC - Read Exchange Concise. + * Note that the requesting port may be different than the S_ID in the request. + */ +static void fc_exch_els_rec(struct fc_seq *sp, struct fc_frame *rfp) +{ + struct fc_frame *fp; + struct fc_exch *ep; + struct fc_exch_mgr *em; + struct fc_els_rec *rp; + struct fc_els_rec_acc *acc; + enum fc_els_rjt_reason reason = ELS_RJT_LOGIC; + enum fc_els_rjt_explan explan; + u32 sid; + u16 rxid; + u16 oxid; + + rp = fc_frame_payload_get(rfp, sizeof(*rp)); + explan = ELS_EXPL_INV_LEN; + if (!rp) + goto reject; + sid = ntoh24(rp->rec_s_id); + rxid = ntohs(rp->rec_rx_id); + oxid = ntohs(rp->rec_ox_id); + + /* + * Currently it's hard to find the local S_ID from the exchange + * manager. This will eventually be fixed, but for now it's easier + * to lookup the subject exchange twice, once as if we were + * the initiator, and then again if we weren't. + */ + em = fc_seq_exch(sp)->em; + ep = fc_exch_find(em, oxid); + explan = ELS_EXPL_OXID_RXID; + if (ep && ep->oid == sid) { + if (ep->rxid != FC_XID_UNKNOWN && + rxid != FC_XID_UNKNOWN && + ep->rxid != rxid) + goto rel; + } else { + if (ep) + fc_exch_release(ep); + ep = NULL; + if (rxid != FC_XID_UNKNOWN) + ep = fc_exch_find(em, rxid); + if (!ep) + goto reject; + } + + fp = fc_frame_alloc(fc_seq_exch(sp)->lp, sizeof(*acc)); + if (!fp) { + fc_exch_done(sp); + goto out; + } + sp = fc_seq_start_next(sp); + acc = fc_frame_payload_get(fp, sizeof(*acc)); + memset(acc, 0, sizeof(*acc)); + acc->reca_cmd = ELS_LS_ACC; + acc->reca_ox_id = rp->rec_ox_id; + memcpy(acc->reca_ofid, rp->rec_s_id, 3); + acc->reca_rx_id = htons(ep->rxid); + if (ep->sid == ep->oid) + hton24(acc->reca_rfid, ep->did); + else + hton24(acc->reca_rfid, ep->sid); + acc->reca_fc4value = htonl(ep->seq.rec_data); + acc->reca_e_stat = htonl(ep->esb_stat & (ESB_ST_RESP | + ESB_ST_SEQ_INIT | + ESB_ST_COMPLETE)); + sp = fc_seq_start_next(sp); + fc_seq_send_last(sp, fp, FC_RCTL_ELS_REP, FC_TYPE_ELS); +out: + fc_exch_release(ep); + fc_frame_free(rfp); + return; + +rel: + fc_exch_release(ep); +reject: + fc_seq_ls_rjt(sp, reason, explan); + fc_frame_free(rfp); +} + +/* + * Handle response from RRQ. + * Not much to do here, really. + * Should report errors. + * + * TODO: fix error handler. + */ +static void fc_exch_rrq_resp(struct fc_seq *sp, struct fc_frame *fp, void *arg) +{ + struct fc_exch *aborted_ep = arg; + unsigned int op; + + if (IS_ERR(fp)) { + int err = PTR_ERR(fp); + + if (err == -FC_EX_CLOSED) + goto cleanup; + FC_DBG("Cannot process RRQ, because of frame error %d\n", err); + return; + } + + op = fc_frame_payload_op(fp); + fc_frame_free(fp); + + switch (op) { + case ELS_LS_RJT: + FC_DBG("LS_RJT for RRQ"); + /* fall through */ + case ELS_LS_ACC: + goto cleanup; + default: + FC_DBG("unexpected response op %x for RRQ", op); + return; + } + +cleanup: + fc_exch_done(&aborted_ep->seq); + /* drop hold for rec qual */ + fc_exch_release(aborted_ep); +} + +/* + * Send ELS RRQ - Reinstate Recovery Qualifier. + * This tells the remote port to stop blocking the use of + * the exchange and the seq_cnt range. + */ +static void fc_exch_rrq(struct fc_exch *ep) +{ + struct fc_lport *lp; + struct fc_els_rrq *rrq; + struct fc_frame *fp; + struct fc_seq *rrq_sp; + u32 did; + + lp = ep->lp; + + fp = fc_frame_alloc(lp, sizeof(*rrq)); + if (!fp) + return; + rrq = fc_frame_payload_get(fp, sizeof(*rrq)); + memset(rrq, 0, sizeof(*rrq)); + rrq->rrq_cmd = ELS_RRQ; + hton24(rrq->rrq_s_id, ep->sid); + rrq->rrq_ox_id = htons(ep->oxid); + rrq->rrq_rx_id = htons(ep->rxid); + + did = ep->did; + if (ep->esb_stat & ESB_ST_RESP) + did = ep->sid; + + fc_fill_fc_hdr(fp, FC_RCTL_ELS_REQ, did, + fc_host_port_id(lp->host), FC_TYPE_ELS, + FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0); + + rrq_sp = fc_exch_seq_send(lp, fp, fc_exch_rrq_resp, NULL, ep, + lp->e_d_tov); + if (!rrq_sp) { + ep->esb_stat |= ESB_ST_REC_QUAL; + fc_exch_timer_set_locked(ep, ep->r_a_tov); + return; + } +} + + +/* + * Handle incoming ELS RRQ - Reset Recovery Qualifier. + */ +static void fc_exch_els_rrq(struct fc_seq *sp, struct fc_frame *fp) +{ + struct fc_exch *ep; /* request or subject exchange */ + struct fc_els_rrq *rp; + u32 sid; + u16 xid; + enum fc_els_rjt_explan explan; + + rp = fc_frame_payload_get(fp, sizeof(*rp)); + explan = ELS_EXPL_INV_LEN; + if (!rp) + goto reject; + + /* + * lookup subject exchange. + */ + ep = fc_seq_exch(sp); + sid = ntoh24(rp->rrq_s_id); /* subject source */ + xid = ep->did == sid ? ntohs(rp->rrq_ox_id) : ntohs(rp->rrq_rx_id); + ep = fc_exch_find(ep->em, xid); + + explan = ELS_EXPL_OXID_RXID; + if (!ep) + goto reject; + spin_lock_bh(&ep->ex_lock); + if (ep->oxid != ntohs(rp->rrq_ox_id)) + goto unlock_reject; + if (ep->rxid != ntohs(rp->rrq_rx_id) && + ep->rxid != FC_XID_UNKNOWN) + goto unlock_reject; + explan = ELS_EXPL_SID; + if (ep->sid != sid) + goto unlock_reject; + + /* + * Clear Recovery Qualifier state, and cancel timer if complete. + */ + if (ep->esb_stat & ESB_ST_REC_QUAL) { + ep->esb_stat &= ~ESB_ST_REC_QUAL; + atomic_dec(&ep->ex_refcnt); /* drop hold for rec qual */ + } + if (ep->esb_stat & ESB_ST_COMPLETE) { + if (cancel_delayed_work(&ep->timeout_work)) + atomic_dec(&ep->ex_refcnt); /* drop timer hold */ + } + + spin_unlock_bh(&ep->ex_lock); + + /* + * Send LS_ACC. + */ + fc_seq_ls_acc(sp); + fc_frame_free(fp); + return; + +unlock_reject: + spin_unlock_bh(&ep->ex_lock); + fc_exch_release(ep); /* drop hold from fc_exch_find */ +reject: + fc_seq_ls_rjt(sp, ELS_RJT_LOGIC, explan); + fc_frame_free(fp); +} + +struct fc_exch_mgr *fc_exch_mgr_alloc(struct fc_lport *lp, + enum fc_class class, + u16 min_xid, u16 max_xid) +{ + struct fc_exch_mgr *mp; + size_t len; + + if (max_xid <= min_xid || min_xid == 0 || max_xid == FC_XID_UNKNOWN) { + FC_DBG("Invalid min_xid 0x:%x and max_xid 0x:%x\n", + min_xid, max_xid); + return NULL; + } + + /* + * Memory need for EM + */ +#define xid_ok(i, m1, m2) (((i) >= (m1)) && ((i) <= (m2))) + len = (max_xid - min_xid + 1) * (sizeof(struct fc_exch *)); + len += sizeof(struct fc_exch_mgr); + + mp = kzalloc(len, GFP_ATOMIC); + if (!mp) + return NULL; + + mp->class = class; + mp->total_exches = 0; + mp->exches = (struct fc_exch **)(mp + 1); + mp->lp = lp; + /* adjust em exch xid range for offload */ + mp->min_xid = min_xid; + mp->max_xid = max_xid; + mp->last_xid = min_xid - 1; + mp->max_read = 0; + mp->last_read = 0; + if (lp->lro_enabled && xid_ok(lp->lro_xid, min_xid, max_xid)) { + mp->max_read = lp->lro_xid; + mp->last_read = min_xid - 1; + mp->last_xid = mp->max_read; + } else { + /* disable lro if no xid control over read */ + lp->lro_enabled = 0; + } + + INIT_LIST_HEAD(&mp->ex_list); + spin_lock_init(&mp->em_lock); + + mp->ep_pool = mempool_create_slab_pool(2, fc_em_cachep); + if (!mp->ep_pool) + goto free_mp; + + return mp; + +free_mp: + kfree(mp); + return NULL; +} +EXPORT_SYMBOL(fc_exch_mgr_alloc); + +void fc_exch_mgr_free(struct fc_exch_mgr *mp) +{ + WARN_ON(!mp); + /* + * The total exch count must be zero + * before freeing exchange manager. + */ + WARN_ON(mp->total_exches != 0); + mempool_destroy(mp->ep_pool); + kfree(mp); +} +EXPORT_SYMBOL(fc_exch_mgr_free); + +struct fc_exch *fc_exch_get(struct fc_lport *lp, struct fc_frame *fp) +{ + if (!lp || !lp->emp) + return NULL; + + return fc_exch_alloc(lp->emp, fp, 0); +} +EXPORT_SYMBOL(fc_exch_get); + +struct fc_seq *fc_exch_seq_send(struct fc_lport *lp, + struct fc_frame *fp, + void (*resp)(struct fc_seq *, + struct fc_frame *fp, + void *arg), + void (*destructor)(struct fc_seq *, void *), + void *arg, u32 timer_msec) +{ + struct fc_exch *ep; + struct fc_seq *sp = NULL; + struct fc_frame_header *fh; + int rc = 1; + + ep = lp->tt.exch_get(lp, fp); + if (!ep) { + fc_frame_free(fp); + return NULL; + } + ep->esb_stat |= ESB_ST_SEQ_INIT; + fh = fc_frame_header_get(fp); + fc_exch_set_addr(ep, ntoh24(fh->fh_s_id), ntoh24(fh->fh_d_id)); + ep->resp = resp; + ep->destructor = destructor; + ep->arg = arg; + ep->r_a_tov = FC_DEF_R_A_TOV; + ep->lp = lp; + sp = &ep->seq; + + ep->fh_type = fh->fh_type; /* save for possbile timeout handling */ + ep->f_ctl = ntoh24(fh->fh_f_ctl); + fc_exch_setup_hdr(ep, fp, ep->f_ctl); + sp->cnt++; + + if (unlikely(lp->tt.frame_send(lp, fp))) + goto err; + + if (timer_msec) + fc_exch_timer_set_locked(ep, timer_msec); + ep->f_ctl &= ~FC_FC_FIRST_SEQ; /* not first seq */ + + if (ep->f_ctl & FC_FC_SEQ_INIT) + ep->esb_stat &= ~ESB_ST_SEQ_INIT; + spin_unlock_bh(&ep->ex_lock); + return sp; +err: + rc = fc_exch_done_locked(ep); + spin_unlock_bh(&ep->ex_lock); + if (!rc) + fc_exch_mgr_delete_ep(ep); + return NULL; +} +EXPORT_SYMBOL(fc_exch_seq_send); + +/* + * Receive a frame + */ +void fc_exch_recv(struct fc_lport *lp, struct fc_exch_mgr *mp, + struct fc_frame *fp) +{ + struct fc_frame_header *fh = fc_frame_header_get(fp); + u32 f_ctl; + + /* lport lock ? */ + if (!lp || !mp || (lp->state == LPORT_ST_NONE)) { + FC_DBG("fc_lport or EM is not allocated and configured"); + fc_frame_free(fp); + return; + } + + /* + * If frame is marked invalid, just drop it. + */ + f_ctl = ntoh24(fh->fh_f_ctl); + switch (fr_eof(fp)) { + case FC_EOF_T: + if (f_ctl & FC_FC_END_SEQ) + skb_trim(fp_skb(fp), fr_len(fp) - FC_FC_FILL(f_ctl)); + /* fall through */ + case FC_EOF_N: + if (fh->fh_type == FC_TYPE_BLS) + fc_exch_recv_bls(mp, fp); + else if ((f_ctl & (FC_FC_EX_CTX | FC_FC_SEQ_CTX)) == + FC_FC_EX_CTX) + fc_exch_recv_seq_resp(mp, fp); + else if (f_ctl & FC_FC_SEQ_CTX) + fc_exch_recv_resp(mp, fp); + else + fc_exch_recv_req(lp, mp, fp); + break; + default: + FC_DBG("dropping invalid frame (eof %x)", fr_eof(fp)); + fc_frame_free(fp); + break; + } +} +EXPORT_SYMBOL(fc_exch_recv); + +int fc_exch_init(struct fc_lport *lp) +{ + if (!lp->tt.exch_get) { + /* + * exch_put() should be NULL if + * exch_get() is NULL + */ + WARN_ON(lp->tt.exch_put); + lp->tt.exch_get = fc_exch_get; + } + + if (!lp->tt.seq_start_next) + lp->tt.seq_start_next = fc_seq_start_next; + + if (!lp->tt.exch_seq_send) + lp->tt.exch_seq_send = fc_exch_seq_send; + + if (!lp->tt.seq_send) + lp->tt.seq_send = fc_seq_send; + + if (!lp->tt.seq_els_rsp_send) + lp->tt.seq_els_rsp_send = fc_seq_els_rsp_send; + + if (!lp->tt.exch_done) + lp->tt.exch_done = fc_exch_done; + + if (!lp->tt.exch_mgr_reset) + lp->tt.exch_mgr_reset = fc_exch_mgr_reset; + + if (!lp->tt.seq_exch_abort) + lp->tt.seq_exch_abort = fc_seq_exch_abort; + + return 0; +} +EXPORT_SYMBOL(fc_exch_init); + +int fc_setup_exch_mgr(void) +{ + fc_em_cachep = kmem_cache_create("libfc_em", sizeof(struct fc_exch), + 0, SLAB_HWCACHE_ALIGN, NULL); + if (!fc_em_cachep) + return -ENOMEM; + return 0; +} + +void fc_destroy_exch_mgr(void) +{ + kmem_cache_destroy(fc_em_cachep); +} diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c new file mode 100644 index 0000000..404e63f --- /dev/null +++ b/drivers/scsi/libfc/fc_fcp.c @@ -0,0 +1,2131 @@ +/* + * Copyright(c) 2007 Intel Corporation. All rights reserved. + * Copyright(c) 2008 Red Hat, Inc. All rights reserved. + * Copyright(c) 2008 Mike Christie + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Maintained at www.Open-FCoE.org + */ + +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/spinlock.h> +#include <linux/scatterlist.h> +#include <linux/err.h> +#include <linux/crc32.h> + +#include <scsi/scsi_tcq.h> +#include <scsi/scsi.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_cmnd.h> + +#include <scsi/fc/fc_fc2.h> + +#include <scsi/libfc.h> +#include <scsi/fc_encode.h> + +MODULE_AUTHOR("Open-FCoE.org"); +MODULE_DESCRIPTION("libfc"); +MODULE_LICENSE("GPL"); + +static int fc_fcp_debug; + +#define FC_DEBUG_FCP(fmt...) \ + do { \ + if (fc_fcp_debug) \ + FC_DBG(fmt); \ + } while (0) + +static struct kmem_cache *scsi_pkt_cachep; + +/* SRB state definitions */ +#define FC_SRB_FREE 0 /* cmd is free */ +#define FC_SRB_CMD_SENT (1 << 0) /* cmd has been sent */ +#define FC_SRB_RCV_STATUS (1 << 1) /* response has arrived */ +#define FC_SRB_ABORT_PENDING (1 << 2) /* cmd abort sent to device */ +#define FC_SRB_ABORTED (1 << 3) /* abort acknowleged */ +#define FC_SRB_DISCONTIG (1 << 4) /* non-sequential data recvd */ +#define FC_SRB_COMPL (1 << 5) /* fc_io_compl has been run */ +#define FC_SRB_FCP_PROCESSING_TMO (1 << 6) /* timer function processing */ +#define FC_SRB_NOMEM (1 << 7) /* dropped to out of mem */ + +#define FC_SRB_READ (1 << 1) +#define FC_SRB_WRITE (1 << 0) + +/* + * The SCp.ptr should be tested and set under the host lock. NULL indicates + * that the command has been retruned to the scsi layer. + */ +#define CMD_SP(Cmnd) ((struct fc_fcp_pkt *)(Cmnd)->SCp.ptr) +#define CMD_ENTRY_STATUS(Cmnd) ((Cmnd)->SCp.have_data_in) +#define CMD_COMPL_STATUS(Cmnd) ((Cmnd)->SCp.this_residual) +#define CMD_SCSI_STATUS(Cmnd) ((Cmnd)->SCp.Status) +#define CMD_RESID_LEN(Cmnd) ((Cmnd)->SCp.buffers_residual) + +struct fc_fcp_internal { + mempool_t *scsi_pkt_pool; + struct list_head scsi_pkt_queue; + u8 throttled; +}; + +#define fc_get_scsi_internal(x) ((struct fc_fcp_internal *)(x)->scsi_priv) + +/* + * function prototypes + * FC scsi I/O related functions + */ +static void fc_fcp_recv_data(struct fc_fcp_pkt *, struct fc_frame *); +static void fc_fcp_recv(struct fc_seq *, struct fc_frame *, void *); +static void fc_fcp_resp(struct fc_fcp_pkt *, struct fc_frame *); +static void fc_fcp_complete_locked(struct fc_fcp_pkt *); +static void fc_tm_done(struct fc_seq *, struct fc_frame *, void *); +static void fc_fcp_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp); +static void fc_timeout_error(struct fc_fcp_pkt *); +static void fc_fcp_timeout(unsigned long data); +static void fc_fcp_rec(struct fc_fcp_pkt *); +static void fc_fcp_rec_error(struct fc_fcp_pkt *, struct fc_frame *); +static void fc_fcp_rec_resp(struct fc_seq *, struct fc_frame *, void *); +static void fc_io_compl(struct fc_fcp_pkt *); + +static void fc_fcp_srr(struct fc_fcp_pkt *, enum fc_rctl, u32); +static void fc_fcp_srr_resp(struct fc_seq *, struct fc_frame *, void *); +static void fc_fcp_srr_error(struct fc_fcp_pkt *, struct fc_frame *); + +/* + * command status codes + */ +#define FC_COMPLETE 0 +#define FC_CMD_ABORTED 1 +#define FC_CMD_RESET 2 +#define FC_CMD_PLOGO 3 +#define FC_SNS_RCV 4 +#define FC_TRANS_ERR 5 +#define FC_DATA_OVRRUN 6 +#define FC_DATA_UNDRUN 7 +#define FC_ERROR 8 +#define FC_HRD_ERROR 9 +#define FC_CMD_TIME_OUT 10 + +/* + * Error recovery timeout values. + */ +#define FC_SCSI_ER_TIMEOUT (10 * HZ) +#define FC_SCSI_TM_TOV (10 * HZ) +#define FC_SCSI_REC_TOV (2 * HZ) +#define FC_HOST_RESET_TIMEOUT (30 * HZ) + +#define FC_MAX_ERROR_CNT 5 +#define FC_MAX_RECOV_RETRY 3 + +#define FC_FCP_DFLT_QUEUE_DEPTH 32 + +/** + * fc_fcp_pkt_alloc - allocation routine for scsi_pkt packet + * @lp: fc lport struct + * @gfp: gfp flags for allocation + * + * This is used by upper layer scsi driver. + * Return Value : scsi_pkt structure or null on allocation failure. + * Context : call from process context. no locking required. + */ +static struct fc_fcp_pkt *fc_fcp_pkt_alloc(struct fc_lport *lp, gfp_t gfp) +{ + struct fc_fcp_internal *si = fc_get_scsi_internal(lp); + struct fc_fcp_pkt *fsp; + + fsp = mempool_alloc(si->scsi_pkt_pool, gfp); + if (fsp) { + memset(fsp, 0, sizeof(*fsp)); + fsp->lp = lp; + atomic_set(&fsp->ref_cnt, 1); + init_timer(&fsp->timer); + INIT_LIST_HEAD(&fsp->list); + spin_lock_init(&fsp->scsi_pkt_lock); + } + return fsp; +} + +/** + * fc_fcp_pkt_release - release hold on scsi_pkt packet + * @fsp: fcp packet struct + * + * This is used by upper layer scsi driver. + * Context : call from process and interrupt context. + * no locking required + */ +static void fc_fcp_pkt_release(struct fc_fcp_pkt *fsp) +{ + if (atomic_dec_and_test(&fsp->ref_cnt)) { + struct fc_fcp_internal *si = fc_get_scsi_internal(fsp->lp); + + mempool_free(fsp, si->scsi_pkt_pool); + } +} + +static void fc_fcp_pkt_hold(struct fc_fcp_pkt *fsp) +{ + atomic_inc(&fsp->ref_cnt); +} + +/** + * fc_fcp_pkt_destory - release hold on scsi_pkt packet + * + * @seq: exchange sequence + * @fsp: fcp packet struct + * + * Release hold on scsi_pkt packet set to keep scsi_pkt + * till EM layer exch resource is not freed. + * Context : called from from EM layer. + * no locking required + */ +static void fc_fcp_pkt_destroy(struct fc_seq *seq, void *fsp) +{ + fc_fcp_pkt_release(fsp); +} + +/** + * fc_fcp_lock_pkt - lock a packet and get a ref to it. + * @fsp: fcp packet + * + * We should only return error if we return a command to scsi-ml before + * getting a response. This can happen in cases where we send a abort, but + * do not wait for the response and the abort and command can be passing + * each other on the wire/network-layer. + * + * Note: this function locks the packet and gets a reference to allow + * callers to call the completion function while the lock is held and + * not have to worry about the packets refcount. + * + * TODO: Maybe we should just have callers grab/release the lock and + * have a function that they call to verify the fsp and grab a ref if + * needed. + */ +static inline int fc_fcp_lock_pkt(struct fc_fcp_pkt *fsp) +{ + spin_lock_bh(&fsp->scsi_pkt_lock); + if (fsp->state & FC_SRB_COMPL) { + spin_unlock_bh(&fsp->scsi_pkt_lock); + return -EPERM; + } + + fc_fcp_pkt_hold(fsp); + return 0; +} + +static inline void fc_fcp_unlock_pkt(struct fc_fcp_pkt *fsp) +{ + spin_unlock_bh(&fsp->scsi_pkt_lock); + fc_fcp_pkt_release(fsp); +} + +static void fc_fcp_timer_set(struct fc_fcp_pkt *fsp, unsigned long delay) +{ + if (!(fsp->state & FC_SRB_COMPL)) + mod_timer(&fsp->timer, jiffies + delay); +} + +static int fc_fcp_send_abort(struct fc_fcp_pkt *fsp) +{ + if (!fsp->seq_ptr) + return -EINVAL; + + fsp->state |= FC_SRB_ABORT_PENDING; + return fsp->lp->tt.seq_exch_abort(fsp->seq_ptr, 0); +} + +/* + * Retry command. + * An abort isn't needed. + */ +static void fc_fcp_retry_cmd(struct fc_fcp_pkt *fsp) +{ + if (fsp->seq_ptr) { + fsp->lp->tt.exch_done(fsp->seq_ptr); + fsp->seq_ptr = NULL; + } + + fsp->state &= ~FC_SRB_ABORT_PENDING; + fsp->io_status = SUGGEST_RETRY << 24; + fsp->status_code = FC_ERROR; + fc_fcp_complete_locked(fsp); +} + +/* + * Receive SCSI data from target. + * Called after receiving solicited data. + */ +static void fc_fcp_recv_data(struct fc_fcp_pkt *fsp, struct fc_frame *fp) +{ + struct scsi_cmnd *sc = fsp->cmd; + struct fc_lport *lp = fsp->lp; + struct fcoe_dev_stats *stats; + struct fc_frame_header *fh; + size_t start_offset; + size_t offset; + u32 crc; + u32 copy_len = 0; + size_t len; + void *buf; + struct scatterlist *sg; + size_t remaining; + + fh = fc_frame_header_get(fp); + offset = ntohl(fh->fh_parm_offset); + start_offset = offset; + len = fr_len(fp) - sizeof(*fh); + buf = fc_frame_payload_get(fp, 0); + + if (offset + len > fsp->data_len) { + /* + * this should never happen + */ + if ((fr_flags(fp) & FCPHF_CRC_UNCHECKED) && + fc_frame_crc_check(fp)) + goto crc_err; + FC_DEBUG_FCP("data received past end. len %zx offset %zx " + "data_len %x\n", len, offset, fsp->data_len); + fc_fcp_retry_cmd(fsp); + return; + } + if (offset != fsp->xfer_len) + fsp->state |= FC_SRB_DISCONTIG; + + crc = 0; + if (fr_flags(fp) & FCPHF_CRC_UNCHECKED) + crc = crc32(~0, (u8 *) fh, sizeof(*fh)); + + sg = scsi_sglist(sc); + remaining = len; + + while (remaining > 0 && sg) { + size_t off; + void *page_addr; + size_t sg_bytes; + + if (offset >= sg->length) { + offset -= sg->length; + sg = sg_next(sg); + continue; + } + sg_bytes = min(remaining, sg->length - offset); + + /* + * The scatterlist item may be bigger than PAGE_SIZE, + * but we are limited to mapping PAGE_SIZE at a time. + */ + off = offset + sg->offset; + sg_bytes = min(sg_bytes, (size_t) + (PAGE_SIZE - (off & ~PAGE_MASK))); + page_addr = kmap_atomic(sg_page(sg) + (off >> PAGE_SHIFT), + KM_SOFTIRQ0); + if (!page_addr) + break; /* XXX panic? */ + + if (fr_flags(fp) & FCPHF_CRC_UNCHECKED) + crc = crc32(crc, buf, sg_bytes); + memcpy((char *)page_addr + (off & ~PAGE_MASK), buf, + sg_bytes); + + kunmap_atomic(page_addr, KM_SOFTIRQ0); + buf += sg_bytes; + offset += sg_bytes; + remaining -= sg_bytes; + copy_len += sg_bytes; + } + + if (fr_flags(fp) & FCPHF_CRC_UNCHECKED) { + buf = fc_frame_payload_get(fp, 0); + if (len % 4) { + crc = crc32(crc, buf + len, 4 - (len % 4)); + len += 4 - (len % 4); + } + + if (~crc != le32_to_cpu(fr_crc(fp))) { +crc_err: + stats = lp->dev_stats[smp_processor_id()]; + stats->ErrorFrames++; + if (stats->InvalidCRCCount++ < 5) + FC_DBG("CRC error on data frame\n"); + /* + * Assume the frame is total garbage. + * We may have copied it over the good part + * of the buffer. + * If so, we need to retry the entire operation. + * Otherwise, ignore it. + */ + if (fsp->state & FC_SRB_DISCONTIG) + fc_fcp_retry_cmd(fsp); + return; + } + } + + if (fsp->xfer_contig_end == start_offset) + fsp->xfer_contig_end += copy_len; + fsp->xfer_len += copy_len; + + /* + * In the very rare event that this data arrived after the response + * and completes the transfer, call the completion handler. + */ + if (unlikely(fsp->state & FC_SRB_RCV_STATUS) && + fsp->xfer_len == fsp->data_len - fsp->scsi_resid) + fc_fcp_complete_locked(fsp); +} + +/* + * fc_fcp_send_data - Send SCSI data to target. + * @fsp: ptr to fc_fcp_pkt + * @sp: ptr to this sequence + * @offset: starting offset for this data request + * @seq_blen: the burst length for this data request + * + * Called after receiving a Transfer Ready data descriptor. + * if LLD is capable of seq offload then send down seq_blen + * size of data in single frame, otherwise send multiple FC + * frames of max FC frame payload supported by target port. + * + * Returns : 0 for success. + */ +static int fc_fcp_send_data(struct fc_fcp_pkt *fsp, struct fc_seq *seq, + size_t offset, size_t seq_blen) +{ + struct fc_exch *ep; + struct scsi_cmnd *sc; + struct scatterlist *sg; + struct fc_frame *fp = NULL; + struct fc_lport *lp = fsp->lp; + size_t remaining; + size_t t_blen; + size_t tlen; + size_t sg_bytes; + size_t frame_offset, fh_parm_offset; + int error; + void *data = NULL; + void *page_addr; + int using_sg = lp->sg_supp; + u32 f_ctl; + + WARN_ON(seq_blen <= 0); + if (unlikely(offset + seq_blen > fsp->data_len)) { + /* this should never happen */ + FC_DEBUG_FCP("xfer-ready past end. seq_blen %zx offset %zx\n", + seq_blen, offset); + fc_fcp_send_abort(fsp); + return 0; + } else if (offset != fsp->xfer_len) { + /* Out of Order Data Request - no problem, but unexpected. */ + FC_DEBUG_FCP("xfer-ready non-contiguous. " + "seq_blen %zx offset %zx\n", seq_blen, offset); + } + + /* + * if LLD is capable of seq_offload then set transport + * burst length (t_blen) to seq_blen, otherwise set t_blen + * to max FC frame payload previously set in fsp->max_payload. + */ + t_blen = lp->seq_offload ? seq_blen : fsp->max_payload; + WARN_ON(t_blen < FC_MIN_MAX_PAYLOAD); + if (t_blen > 512) + t_blen &= ~(512 - 1); /* round down to block size */ + WARN_ON(t_blen < FC_MIN_MAX_PAYLOAD); /* won't go below 256 */ + sc = fsp->cmd; + + remaining = seq_blen; + fh_parm_offset = frame_offset = offset; + tlen = 0; + seq = lp->tt.seq_start_next(seq); + f_ctl = FC_FC_REL_OFF; + WARN_ON(!seq); + + /* + * If a get_page()/put_page() will fail, don't use sg lists + * in the fc_frame structure. + * + * The put_page() may be long after the I/O has completed + * in the case of FCoE, since the network driver does it + * via free_skb(). See the test in free_pages_check(). + * + * Test this case with 'dd </dev/zero >/dev/st0 bs=64k'. + */ + if (using_sg) { + for (sg = scsi_sglist(sc); sg; sg = sg_next(sg)) { + if (page_count(sg_page(sg)) == 0 || + (sg_page(sg)->flags & (1 << PG_lru | + 1 << PG_private | + 1 << PG_locked | + 1 << PG_active | + 1 << PG_slab | + 1 << PG_swapcache | + 1 << PG_writeback | + 1 << PG_reserved | + 1 << PG_buddy))) { + using_sg = 0; + break; + } + } + } + sg = scsi_sglist(sc); + + while (remaining > 0 && sg) { + if (offset >= sg->length) { + offset -= sg->length; + sg = sg_next(sg); + continue; + } + if (!fp) { + tlen = min(t_blen, remaining); + + /* + * TODO. Temporary workaround. fc_seq_send() can't + * handle odd lengths in non-linear skbs. + * This will be the final fragment only. + */ + if (tlen % 4) + using_sg = 0; + if (using_sg) { + fp = _fc_frame_alloc(lp, 0); + if (!fp) + return -ENOMEM; + } else { + fp = fc_frame_alloc(lp, tlen); + if (!fp) + return -ENOMEM; + + data = (void *)(fr_hdr(fp)) + + sizeof(struct fc_frame_header); + } + fh_parm_offset = frame_offset; + fr_max_payload(fp) = fsp->max_payload; + } + sg_bytes = min(tlen, sg->length - offset); + if (using_sg) { + WARN_ON(skb_shinfo(fp_skb(fp))->nr_frags > + FC_FRAME_SG_LEN); + get_page(sg_page(sg)); + skb_fill_page_desc(fp_skb(fp), + skb_shinfo(fp_skb(fp))->nr_frags, + sg_page(sg), sg->offset + offset, + sg_bytes); + fp_skb(fp)->data_len += sg_bytes; + fr_len(fp) += sg_bytes; + fp_skb(fp)->truesize += PAGE_SIZE; + } else { + size_t off = offset + sg->offset; + + /* + * The scatterlist item may be bigger than PAGE_SIZE, + * but we must not cross pages inside the kmap. + */ + sg_bytes = min(sg_bytes, (size_t) (PAGE_SIZE - + (off & ~PAGE_MASK))); + page_addr = kmap_atomic(sg_page(sg) + + (off >> PAGE_SHIFT), + KM_SOFTIRQ0); + memcpy(data, (char *)page_addr + (off & ~PAGE_MASK), + sg_bytes); + kunmap_atomic(page_addr, KM_SOFTIRQ0); + data += sg_bytes; + } + offset += sg_bytes; + frame_offset += sg_bytes; + tlen -= sg_bytes; + remaining -= sg_bytes; + + if (tlen) + continue; + + /* + * Send sequence with transfer sequence initiative in case + * this is last FCP frame of the sequence. + */ + if (remaining == 0) + f_ctl |= FC_FC_SEQ_INIT | FC_FC_END_SEQ; + + ep = fc_seq_exch(seq); + fc_fill_fc_hdr(fp, FC_RCTL_DD_SOL_DATA, ep->did, ep->sid, + FC_TYPE_FCP, f_ctl, fh_parm_offset); + + /* + * send fragment using for a sequence. + */ + error = lp->tt.seq_send(lp, seq, fp); + if (error) { + WARN_ON(1); /* send error should be rare */ + fc_fcp_retry_cmd(fsp); + return 0; + } + fp = NULL; + } + fsp->xfer_len += seq_blen; /* premature count? */ + return 0; +} + +static void fc_fcp_abts_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp) +{ + int ba_done = 1; + struct fc_ba_rjt *brp; + struct fc_frame_header *fh; + + fh = fc_frame_header_get(fp); + switch (fh->fh_r_ctl) { + case FC_RCTL_BA_ACC: + break; + case FC_RCTL_BA_RJT: + brp = fc_frame_payload_get(fp, sizeof(*brp)); + if (brp && brp->br_reason == FC_BA_RJT_LOG_ERR) + break; + /* fall thru */ + default: + /* + * we will let the command timeout + * and scsi-ml recover in this case, + * therefore cleared the ba_done flag. + */ + ba_done = 0; + } + + if (ba_done) { + fsp->state |= FC_SRB_ABORTED; + fsp->state &= ~FC_SRB_ABORT_PENDING; + + if (fsp->wait_for_comp) + complete(&fsp->tm_done); + else + fc_fcp_complete_locked(fsp); + } +} + +/* + * fc_fcp_reduce_can_queue - drop can_queue + * @lp: lport to drop queueing for + * + * If we are getting memory allocation failures, then we may + * be trying to execute too many commands. We let the running + * commands complete or timeout, then try again with a reduced + * can_queue. Eventually we will hit the point where we run + * on all reserved structs. + */ +static void fc_fcp_reduce_can_queue(struct fc_lport *lp) +{ + struct fc_fcp_internal *si = fc_get_scsi_internal(lp); + unsigned long flags; + int can_queue; + + spin_lock_irqsave(lp->host->host_lock, flags); + if (si->throttled) + goto done; + si->throttled = 1; + + can_queue = lp->host->can_queue; + can_queue >>= 1; + if (!can_queue) + can_queue = 1; + lp->host->can_queue = can_queue; + shost_printk(KERN_ERR, lp->host, "Could not allocate frame.\n" + "Reducing can_queue to %d.\n", can_queue); +done: + spin_unlock_irqrestore(lp->host->host_lock, flags); +} + +/* + * exch mgr calls this routine to process scsi + * exchanges. + * + * Return : None + * Context : called from Soft IRQ context + * can not called holding list lock + */ +static void fc_fcp_recv(struct fc_seq *seq, struct fc_frame *fp, void *arg) +{ + struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg; + struct fc_lport *lp; + struct fc_frame_header *fh; + struct fcp_txrdy *dd; + u8 r_ctl; + int rc = 0; + + if (IS_ERR(fp)) + goto errout; + + fh = fc_frame_header_get(fp); + r_ctl = fh->fh_r_ctl; + lp = fsp->lp; + + if (!(lp->state & LPORT_ST_READY)) + goto out; + if (fc_fcp_lock_pkt(fsp)) + goto out; + fsp->last_pkt_time = jiffies; + + if (fh->fh_type == FC_TYPE_BLS) { + fc_fcp_abts_resp(fsp, fp); + goto unlock; + } + + if (fsp->state & (FC_SRB_ABORTED | FC_SRB_ABORT_PENDING)) + goto unlock; + + if (r_ctl == FC_RCTL_DD_DATA_DESC) { + /* + * received XFER RDY from the target + * need to send data to the target + */ + WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED); + dd = fc_frame_payload_get(fp, sizeof(*dd)); + WARN_ON(!dd); + + rc = fc_fcp_send_data(fsp, seq, + (size_t) ntohl(dd->ft_data_ro), + (size_t) ntohl(dd->ft_burst_len)); + if (!rc) + seq->rec_data = fsp->xfer_len; + else if (rc == -ENOMEM) + fsp->state |= FC_SRB_NOMEM; + } else if (r_ctl == FC_RCTL_DD_SOL_DATA) { + /* + * received a DATA frame + * next we will copy the data to the system buffer + */ + WARN_ON(fr_len(fp) < sizeof(*fh)); /* len may be 0 */ + fc_fcp_recv_data(fsp, fp); + seq->rec_data = fsp->xfer_contig_end; + } else if (r_ctl == FC_RCTL_DD_CMD_STATUS) { + WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED); + + fc_fcp_resp(fsp, fp); + } else { + FC_DBG("unexpected frame. r_ctl %x\n", r_ctl); + } +unlock: + fc_fcp_unlock_pkt(fsp); +out: + fc_frame_free(fp); +errout: + if (IS_ERR(fp)) + fc_fcp_error(fsp, fp); + else if (rc == -ENOMEM) + fc_fcp_reduce_can_queue(lp); +} + +static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp) +{ + struct fc_frame_header *fh; + struct fcp_resp *fc_rp; + struct fcp_resp_ext *rp_ex; + struct fcp_resp_rsp_info *fc_rp_info; + u32 plen; + u32 expected_len; + u32 respl = 0; + u32 snsl = 0; + u8 flags = 0; + + plen = fr_len(fp); + fh = (struct fc_frame_header *)fr_hdr(fp); + if (unlikely(plen < sizeof(*fh) + sizeof(*fc_rp))) + goto len_err; + plen -= sizeof(*fh); + fc_rp = (struct fcp_resp *)(fh + 1); + fsp->cdb_status = fc_rp->fr_status; + flags = fc_rp->fr_flags; + fsp->scsi_comp_flags = flags; + expected_len = fsp->data_len; + + if (unlikely((flags & ~FCP_CONF_REQ) || fc_rp->fr_status)) { + rp_ex = (void *)(fc_rp + 1); + if (flags & (FCP_RSP_LEN_VAL | FCP_SNS_LEN_VAL)) { + if (plen < sizeof(*fc_rp) + sizeof(*rp_ex)) + goto len_err; + fc_rp_info = (struct fcp_resp_rsp_info *)(rp_ex + 1); + if (flags & FCP_RSP_LEN_VAL) { + respl = ntohl(rp_ex->fr_rsp_len); + if (respl != sizeof(*fc_rp_info)) + goto len_err; + if (fsp->wait_for_comp) { + /* Abuse cdb_status for rsp code */ + fsp->cdb_status = fc_rp_info->rsp_code; + complete(&fsp->tm_done); + /* + * tmfs will not have any scsi cmd so + * exit here + */ + return; + } else + goto err; + } + if (flags & FCP_SNS_LEN_VAL) { + snsl = ntohl(rp_ex->fr_sns_len); + if (snsl > SCSI_SENSE_BUFFERSIZE) + snsl = SCSI_SENSE_BUFFERSIZE; + memcpy(fsp->cmd->sense_buffer, + (char *)fc_rp_info + respl, snsl); + } + } + if (flags & (FCP_RESID_UNDER | FCP_RESID_OVER)) { + if (plen < sizeof(*fc_rp) + sizeof(rp_ex->fr_resid)) + goto len_err; + if (flags & FCP_RESID_UNDER) { + fsp->scsi_resid = ntohl(rp_ex->fr_resid); + /* + * The cmnd->underflow is the minimum number of + * bytes that must be transfered for this + * command. Provided a sense condition is not + * present, make sure the actual amount + * transferred is at least the underflow value + * or fail. + */ + if (!(flags & FCP_SNS_LEN_VAL) && + (fc_rp->fr_status == 0) && + (scsi_bufflen(fsp->cmd) - + fsp->scsi_resid) < fsp->cmd->underflow) + goto err; + expected_len -= fsp->scsi_resid; + } else { + fsp->status_code = FC_ERROR; + } + } + } + fsp->state |= FC_SRB_RCV_STATUS; + + /* + * Check for missing or extra data frames. + */ + if (unlikely(fsp->xfer_len != expected_len)) { + if (fsp->xfer_len < expected_len) { + /* + * Some data may be queued locally, + * Wait a at least one jiffy to see if it is delivered. + * If this expires without data, we may do SRR. + */ + fc_fcp_timer_set(fsp, 2); + return; + } + fsp->status_code = FC_DATA_OVRRUN; + FC_DBG("tgt %6x xfer len %zx greater than expected len %x. " + "data len %x\n", + fsp->rport->port_id, + fsp->xfer_len, expected_len, fsp->data_len); + } + fc_fcp_complete_locked(fsp); + return; + +len_err: + FC_DBG("short FCP response. flags 0x%x len %u respl %u snsl %u\n", + flags, fr_len(fp), respl, snsl); +err: + fsp->status_code = FC_ERROR; + fc_fcp_complete_locked(fsp); +} + +/** + * fc_fcp_complete_locked - complete processing of a fcp packet + * @fsp: fcp packet + * + * This function may sleep if a timer is pending. The packet lock must be + * held, and the host lock must not be held. + */ +static void fc_fcp_complete_locked(struct fc_fcp_pkt *fsp) +{ + struct fc_lport *lp = fsp->lp; + struct fc_seq *seq; + struct fc_exch *ep; + u32 f_ctl; + + if (fsp->state & FC_SRB_ABORT_PENDING) + return; + + if (fsp->state & FC_SRB_ABORTED) { + if (!fsp->status_code) + fsp->status_code = FC_CMD_ABORTED; + } else { + /* + * Test for transport underrun, independent of response + * underrun status. + */ + if (fsp->xfer_len < fsp->data_len && !fsp->io_status && + (!(fsp->scsi_comp_flags & FCP_RESID_UNDER) || + fsp->xfer_len < fsp->data_len - fsp->scsi_resid)) { + fsp->status_code = FC_DATA_UNDRUN; + fsp->io_status = SUGGEST_RETRY << 24; + } + } + + seq = fsp->seq_ptr; + if (seq) { + fsp->seq_ptr = NULL; + if (unlikely(fsp->scsi_comp_flags & FCP_CONF_REQ)) { + struct fc_frame *conf_frame; + struct fc_seq *csp; + + csp = lp->tt.seq_start_next(seq); + conf_frame = fc_frame_alloc(fsp->lp, 0); + if (conf_frame) { + f_ctl = FC_FC_SEQ_INIT; + f_ctl |= FC_FC_LAST_SEQ | FC_FC_END_SEQ; + ep = fc_seq_exch(seq); + fc_fill_fc_hdr(conf_frame, FC_RCTL_DD_SOL_CTL, + ep->did, ep->sid, + FC_TYPE_FCP, f_ctl, 0); + lp->tt.seq_send(lp, csp, conf_frame); + } + } + lp->tt.exch_done(seq); + } + fc_io_compl(fsp); +} + +static void fc_fcp_cleanup_cmd(struct fc_fcp_pkt *fsp, int error) +{ + struct fc_lport *lp = fsp->lp; + + if (fsp->seq_ptr) { + lp->tt.exch_done(fsp->seq_ptr); + fsp->seq_ptr = NULL; + } + fsp->status_code = error; +} + +/** + * fc_fcp_cleanup_each_cmd - run fn on each active command + * @lp: logical port + * @id: target id + * @lun: lun + * @error: fsp status code + * + * If lun or id is -1, they are ignored. + */ +static void fc_fcp_cleanup_each_cmd(struct fc_lport *lp, unsigned int id, + unsigned int lun, int error) +{ + struct fc_fcp_internal *si = fc_get_scsi_internal(lp); + struct fc_fcp_pkt *fsp; + struct scsi_cmnd *sc_cmd; + unsigned long flags; + + spin_lock_irqsave(lp->host->host_lock, flags); +restart: + list_for_each_entry(fsp, &si->scsi_pkt_queue, list) { + sc_cmd = fsp->cmd; + if (id != -1 && scmd_id(sc_cmd) != id) + continue; + + if (lun != -1 && sc_cmd->device->lun != lun) + continue; + + fc_fcp_pkt_hold(fsp); + spin_unlock_irqrestore(lp->host->host_lock, flags); + + if (!fc_fcp_lock_pkt(fsp)) { + fc_fcp_cleanup_cmd(fsp, error); + fc_io_compl(fsp); + fc_fcp_unlock_pkt(fsp); + } + + fc_fcp_pkt_release(fsp); + spin_lock_irqsave(lp->host->host_lock, flags); + /* + * while we dropped the lock multiple pkts could + * have been released, so we have to start over. + */ + goto restart; + } + spin_unlock_irqrestore(lp->host->host_lock, flags); +} + +static void fc_fcp_abort_io(struct fc_lport *lp) +{ + fc_fcp_cleanup_each_cmd(lp, -1, -1, FC_HRD_ERROR); +} + +/** + * fc_fcp_pkt_send - send a fcp packet to the lower level. + * @lp: fc lport + * @fsp: fc packet. + * + * This is called by upper layer protocol. + * Return : zero for success and -1 for failure + * Context : called from queuecommand which can be called from process + * or scsi soft irq. + * Locks : called with the host lock and irqs disabled. + */ +static int fc_fcp_pkt_send(struct fc_lport *lp, struct fc_fcp_pkt *fsp) +{ + struct fc_fcp_internal *si = fc_get_scsi_internal(lp); + int rc; + + fsp->cmd->SCp.ptr = (char *)fsp; + fsp->cdb_cmd.fc_dl = htonl(fsp->data_len); + fsp->cdb_cmd.fc_flags = fsp->req_flags & ~FCP_CFL_LEN_MASK; + + int_to_scsilun(fsp->cmd->device->lun, + (struct scsi_lun *)fsp->cdb_cmd.fc_lun); + memcpy(fsp->cdb_cmd.fc_cdb, fsp->cmd->cmnd, fsp->cmd->cmd_len); + list_add_tail(&fsp->list, &si->scsi_pkt_queue); + + spin_unlock_irq(lp->host->host_lock); + rc = lp->tt.fcp_cmd_send(lp, fsp, fc_fcp_recv); + spin_lock_irq(lp->host->host_lock); + if (rc) + list_del(&fsp->list); + + return rc; +} + +static int fc_fcp_cmd_send(struct fc_lport *lp, struct fc_fcp_pkt *fsp, + void (*resp)(struct fc_seq *, + struct fc_frame *fp, + void *arg)) +{ + struct fc_frame *fp; + struct fc_seq *seq; + struct fc_rport *rport; + struct fc_rport_libfc_priv *rp; + const size_t len = sizeof(fsp->cdb_cmd); + int rc = 0; + + if (fc_fcp_lock_pkt(fsp)) + return 0; + + fp = fc_frame_alloc(lp, sizeof(fsp->cdb_cmd)); + if (!fp) { + rc = -1; + goto unlock; + } + + memcpy(fc_frame_payload_get(fp, len), &fsp->cdb_cmd, len); + fr_cmd(fp) = fsp->cmd; + rport = fsp->rport; + fsp->max_payload = rport->maxframe_size; + rp = rport->dd_data; + + fc_fill_fc_hdr(fp, FC_RCTL_DD_UNSOL_CMD, rport->port_id, + fc_host_port_id(rp->local_port->host), FC_TYPE_FCP, + FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0); + + seq = lp->tt.exch_seq_send(lp, fp, resp, fc_fcp_pkt_destroy, fsp, 0); + if (!seq) { + fc_frame_free(fp); + rc = -1; + goto unlock; + } + fsp->last_pkt_time = jiffies; + fsp->seq_ptr = seq; + fc_fcp_pkt_hold(fsp); /* hold for fc_fcp_pkt_destroy */ + + setup_timer(&fsp->timer, fc_fcp_timeout, (unsigned long)fsp); + fc_fcp_timer_set(fsp, + (fsp->tgt_flags & FC_RP_FLAGS_REC_SUPPORTED) ? + FC_SCSI_REC_TOV : FC_SCSI_ER_TIMEOUT); +unlock: + fc_fcp_unlock_pkt(fsp); + return rc; +} + +/* + * transport error handler + */ +static void fc_fcp_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp) +{ + int error = PTR_ERR(fp); + + if (fc_fcp_lock_pkt(fsp)) + return; + + switch (error) { + case -FC_EX_CLOSED: + fc_fcp_retry_cmd(fsp); + goto unlock; + default: + FC_DBG("unknown error %ld\n", PTR_ERR(fp)); + } + /* + * clear abort pending, because the lower layer + * decided to force completion. + */ + fsp->state &= ~FC_SRB_ABORT_PENDING; + fsp->status_code = FC_CMD_PLOGO; + fc_fcp_complete_locked(fsp); +unlock: + fc_fcp_unlock_pkt(fsp); +} + +/* + * Scsi abort handler- calls to send an abort + * and then wait for abort completion + */ +static int fc_fcp_pkt_abort(struct fc_lport *lp, struct fc_fcp_pkt *fsp) +{ + int rc = FAILED; + + if (fc_fcp_send_abort(fsp)) + return FAILED; + + init_completion(&fsp->tm_done); + fsp->wait_for_comp = 1; + + spin_unlock_bh(&fsp->scsi_pkt_lock); + rc = wait_for_completion_timeout(&fsp->tm_done, FC_SCSI_TM_TOV); + spin_lock_bh(&fsp->scsi_pkt_lock); + fsp->wait_for_comp = 0; + + if (!rc) { + FC_DBG("target abort cmd failed\n"); + rc = FAILED; + } else if (fsp->state & FC_SRB_ABORTED) { + FC_DBG("target abort cmd passed\n"); + rc = SUCCESS; + fc_fcp_complete_locked(fsp); + } + + return rc; +} + +/* + * Retry LUN reset after resource allocation failed. + */ +static void fc_lun_reset_send(unsigned long data) +{ + struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data; + struct fc_lport *lp = fsp->lp; + if (lp->tt.fcp_cmd_send(lp, fsp, fc_tm_done)) { + if (fsp->recov_retry++ >= FC_MAX_RECOV_RETRY) + return; + if (fc_fcp_lock_pkt(fsp)) + return; + setup_timer(&fsp->timer, fc_lun_reset_send, (unsigned long)fsp); + fc_fcp_timer_set(fsp, FC_SCSI_REC_TOV); + fc_fcp_unlock_pkt(fsp); + } +} + +/* + * Scsi device reset handler- send a LUN RESET to the device + * and wait for reset reply + */ +static int fc_lun_reset(struct fc_lport *lp, struct fc_fcp_pkt *fsp, + unsigned int id, unsigned int lun) +{ + int rc; + + fsp->cdb_cmd.fc_dl = htonl(fsp->data_len); + fsp->cdb_cmd.fc_tm_flags = FCP_TMF_LUN_RESET; + int_to_scsilun(lun, (struct scsi_lun *)fsp->cdb_cmd.fc_lun); + + fsp->wait_for_comp = 1; + init_completion(&fsp->tm_done); + + fc_lun_reset_send((unsigned long)fsp); + + /* + * wait for completion of reset + * after that make sure all commands are terminated + */ + rc = wait_for_completion_timeout(&fsp->tm_done, FC_SCSI_TM_TOV); + + spin_lock_bh(&fsp->scsi_pkt_lock); + fsp->state |= FC_SRB_COMPL; + spin_unlock_bh(&fsp->scsi_pkt_lock); + + del_timer_sync(&fsp->timer); + + spin_lock_bh(&fsp->scsi_pkt_lock); + if (fsp->seq_ptr) { + lp->tt.exch_done(fsp->seq_ptr); + fsp->seq_ptr = NULL; + } + fsp->wait_for_comp = 0; + spin_unlock_bh(&fsp->scsi_pkt_lock); + + if (!rc) { + FC_DBG("lun reset failed\n"); + return FAILED; + } + + /* cdb_status holds the tmf's rsp code */ + if (fsp->cdb_status != FCP_TMF_CMPL) + return FAILED; + + FC_DBG("lun reset to lun %u completed\n", lun); + fc_fcp_cleanup_each_cmd(lp, id, lun, FC_CMD_ABORTED); + return SUCCESS; +} + +/* + * Task Managment response handler + */ +static void fc_tm_done(struct fc_seq *seq, struct fc_frame *fp, void *arg) +{ + struct fc_fcp_pkt *fsp = arg; + struct fc_frame_header *fh; + + if (IS_ERR(fp)) { + /* + * If there is an error just let it timeout or wait + * for TMF to be aborted if it timedout. + * + * scsi-eh will escalate for when either happens. + */ + return; + } + + if (fc_fcp_lock_pkt(fsp)) + return; + + /* + * raced with eh timeout handler. + */ + if (!fsp->seq_ptr || !fsp->wait_for_comp) { + spin_unlock_bh(&fsp->scsi_pkt_lock); + return; + } + + fh = fc_frame_header_get(fp); + if (fh->fh_type != FC_TYPE_BLS) + fc_fcp_resp(fsp, fp); + fsp->seq_ptr = NULL; + fsp->lp->tt.exch_done(seq); + fc_frame_free(fp); + fc_fcp_unlock_pkt(fsp); +} + +static void fc_fcp_cleanup(struct fc_lport *lp) +{ + fc_fcp_cleanup_each_cmd(lp, -1, -1, FC_ERROR); +} + +/* + * fc_fcp_timeout: called by OS timer function. + * + * The timer has been inactivated and must be reactivated if desired + * using fc_fcp_timer_set(). + * + * Algorithm: + * + * If REC is supported, just issue it, and return. The REC exchange will + * complete or time out, and recovery can continue at that point. + * + * Otherwise, if the response has been received without all the data, + * it has been ER_TIMEOUT since the response was received. + * + * If the response has not been received, + * we see if data was received recently. If it has been, we continue waiting, + * otherwise, we abort the command. + */ +static void fc_fcp_timeout(unsigned long data) +{ + struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data; + struct fc_rport *rport = fsp->rport; + struct fc_rport_libfc_priv *rp = rport->dd_data; + + if (fc_fcp_lock_pkt(fsp)) + return; + + if (fsp->cdb_cmd.fc_tm_flags) + goto unlock; + + fsp->state |= FC_SRB_FCP_PROCESSING_TMO; + + if (rp->flags & FC_RP_FLAGS_REC_SUPPORTED) + fc_fcp_rec(fsp); + else if (time_after_eq(fsp->last_pkt_time + (FC_SCSI_ER_TIMEOUT / 2), + jiffies)) + fc_fcp_timer_set(fsp, FC_SCSI_ER_TIMEOUT); + else if (fsp->state & FC_SRB_RCV_STATUS) + fc_fcp_complete_locked(fsp); + else + fc_timeout_error(fsp); + fsp->state &= ~FC_SRB_FCP_PROCESSING_TMO; +unlock: + fc_fcp_unlock_pkt(fsp); +} + +/* + * Send a REC ELS request + */ +static void fc_fcp_rec(struct fc_fcp_pkt *fsp) +{ + struct fc_lport *lp; + struct fc_frame *fp; + struct fc_rport *rport; + struct fc_rport_libfc_priv *rp; + + lp = fsp->lp; + rport = fsp->rport; + rp = rport->dd_data; + if (!fsp->seq_ptr || rp->rp_state != RPORT_ST_READY) { + fsp->status_code = FC_HRD_ERROR; + fsp->io_status = SUGGEST_RETRY << 24; + fc_fcp_complete_locked(fsp); + return; + } + fp = fc_frame_alloc(lp, sizeof(struct fc_els_rec)); + if (!fp) + goto retry; + + fr_seq(fp) = fsp->seq_ptr; + fc_fill_fc_hdr(fp, FC_RCTL_ELS_REQ, rport->port_id, + fc_host_port_id(rp->local_port->host), FC_TYPE_ELS, + FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0); + if (lp->tt.elsct_send(lp, rport, fp, ELS_REC, fc_fcp_rec_resp, + fsp, jiffies_to_msecs(FC_SCSI_REC_TOV))) { + fc_fcp_pkt_hold(fsp); /* hold while REC outstanding */ + return; + } + fc_frame_free(fp); +retry: + if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY) + fc_fcp_timer_set(fsp, FC_SCSI_REC_TOV); + else + fc_timeout_error(fsp); +} + +/* + * Receive handler for REC ELS frame + * if it is a reject then let the scsi layer to handle + * the timeout. if it is a LS_ACC then if the io was not completed + * then set the timeout and return otherwise complete the exchange + * and tell the scsi layer to restart the I/O. + */ +static void fc_fcp_rec_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg) +{ + struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg; + struct fc_els_rec_acc *recp; + struct fc_els_ls_rjt *rjt; + u32 e_stat; + u8 opcode; + u32 offset; + enum dma_data_direction data_dir; + enum fc_rctl r_ctl; + struct fc_rport_libfc_priv *rp; + + if (IS_ERR(fp)) { + fc_fcp_rec_error(fsp, fp); + return; + } + + if (fc_fcp_lock_pkt(fsp)) + goto out; + + fsp->recov_retry = 0; + opcode = fc_frame_payload_op(fp); + if (opcode == ELS_LS_RJT) { + rjt = fc_frame_payload_get(fp, sizeof(*rjt)); + switch (rjt->er_reason) { + default: + FC_DEBUG_FCP("device %x unexpected REC reject " + "reason %d expl %d\n", + fsp->rport->port_id, rjt->er_reason, + rjt->er_explan); + /* fall through */ + case ELS_RJT_UNSUP: + FC_DEBUG_FCP("device does not support REC\n"); + rp = fsp->rport->dd_data; + /* + * if we do not spport RECs or got some bogus + * reason then resetup timer so we check for + * making progress. + */ + rp->flags &= ~FC_RP_FLAGS_REC_SUPPORTED; + fc_fcp_timer_set(fsp, FC_SCSI_ER_TIMEOUT); + break; + case ELS_RJT_LOGIC: + case ELS_RJT_UNAB: + /* + * If no data transfer, the command frame got dropped + * so we just retry. If data was transferred, we + * lost the response but the target has no record, + * so we abort and retry. + */ + if (rjt->er_explan == ELS_EXPL_OXID_RXID && + fsp->xfer_len == 0) { + fc_fcp_retry_cmd(fsp); + break; + } + fc_timeout_error(fsp); + break; + } + } else if (opcode == ELS_LS_ACC) { + if (fsp->state & FC_SRB_ABORTED) + goto unlock_out; + + data_dir = fsp->cmd->sc_data_direction; + recp = fc_frame_payload_get(fp, sizeof(*recp)); + offset = ntohl(recp->reca_fc4value); + e_stat = ntohl(recp->reca_e_stat); + + if (e_stat & ESB_ST_COMPLETE) { + + /* + * The exchange is complete. + * + * For output, we must've lost the response. + * For input, all data must've been sent. + * We lost may have lost the response + * (and a confirmation was requested) and maybe + * some data. + * + * If all data received, send SRR + * asking for response. If partial data received, + * or gaps, SRR requests data at start of gap. + * Recovery via SRR relies on in-order-delivery. + */ + if (data_dir == DMA_TO_DEVICE) { + r_ctl = FC_RCTL_DD_CMD_STATUS; + } else if (fsp->xfer_contig_end == offset) { + r_ctl = FC_RCTL_DD_CMD_STATUS; + } else { + offset = fsp->xfer_contig_end; + r_ctl = FC_RCTL_DD_SOL_DATA; + } + fc_fcp_srr(fsp, r_ctl, offset); + } else if (e_stat & ESB_ST_SEQ_INIT) { + + /* + * The remote port has the initiative, so just + * keep waiting for it to complete. + */ + fc_fcp_timer_set(fsp, FC_SCSI_REC_TOV); + } else { + + /* + * The exchange is incomplete, we have seq. initiative. + * Lost response with requested confirmation, + * lost confirmation, lost transfer ready or + * lost write data. + * + * For output, if not all data was received, ask + * for transfer ready to be repeated. + * + * If we received or sent all the data, send SRR to + * request response. + * + * If we lost a response, we may have lost some read + * data as well. + */ + r_ctl = FC_RCTL_DD_SOL_DATA; + if (data_dir == DMA_TO_DEVICE) { + r_ctl = FC_RCTL_DD_CMD_STATUS; + if (offset < fsp->data_len) + r_ctl = FC_RCTL_DD_DATA_DESC; + } else if (offset == fsp->xfer_contig_end) { + r_ctl = FC_RCTL_DD_CMD_STATUS; + } else if (fsp->xfer_contig_end < offset) { + offset = fsp->xfer_contig_end; + } + fc_fcp_srr(fsp, r_ctl, offset); + } + } +unlock_out: + fc_fcp_unlock_pkt(fsp); +out: + fc_fcp_pkt_release(fsp); /* drop hold for outstanding REC */ + fc_frame_free(fp); +} + +/* + * Handle error response or timeout for REC exchange. + */ +static void fc_fcp_rec_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp) +{ + int error = PTR_ERR(fp); + + if (fc_fcp_lock_pkt(fsp)) + goto out; + + switch (error) { + case -FC_EX_CLOSED: + fc_fcp_retry_cmd(fsp); + break; + + default: + FC_DBG("REC %p fid %x error unexpected error %d\n", + fsp, fsp->rport->port_id, error); + fsp->status_code = FC_CMD_PLOGO; + /* fall through */ + + case -FC_EX_TIMEOUT: + /* + * Assume REC or LS_ACC was lost. + * The exchange manager will have aborted REC, so retry. + */ + FC_DBG("REC fid %x error error %d retry %d/%d\n", + fsp->rport->port_id, error, fsp->recov_retry, + FC_MAX_RECOV_RETRY); + if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY) + fc_fcp_rec(fsp); + else + fc_timeout_error(fsp); + break; + } + fc_fcp_unlock_pkt(fsp); +out: + fc_fcp_pkt_release(fsp); /* drop hold for outstanding REC */ +} + +/* + * Time out error routine: + * abort's the I/O close the exchange and + * send completion notification to scsi layer + */ +static void fc_timeout_error(struct fc_fcp_pkt *fsp) +{ + fsp->status_code = FC_CMD_TIME_OUT; + fsp->cdb_status = 0; + fsp->io_status = 0; + /* + * if this fails then we let the scsi command timer fire and + * scsi-ml escalate. + */ + fc_fcp_send_abort(fsp); +} + +/* + * Sequence retransmission request. + * This is called after receiving status but insufficient data, or + * when expecting status but the request has timed out. + */ +static void fc_fcp_srr(struct fc_fcp_pkt *fsp, enum fc_rctl r_ctl, u32 offset) +{ + struct fc_lport *lp = fsp->lp; + struct fc_rport *rport; + struct fc_rport_libfc_priv *rp; + struct fc_exch *ep = fc_seq_exch(fsp->seq_ptr); + struct fc_seq *seq; + struct fcp_srr *srr; + struct fc_frame *fp; + u8 cdb_op; + + rport = fsp->rport; + rp = rport->dd_data; + cdb_op = fsp->cdb_cmd.fc_cdb[0]; + + if (!(rp->flags & FC_RP_FLAGS_RETRY) || rp->rp_state != RPORT_ST_READY) + goto retry; /* shouldn't happen */ + fp = fc_frame_alloc(lp, sizeof(*srr)); + if (!fp) + goto retry; + + srr = fc_frame_payload_get(fp, sizeof(*srr)); + memset(srr, 0, sizeof(*srr)); + srr->srr_op = ELS_SRR; + srr->srr_ox_id = htons(ep->oxid); + srr->srr_rx_id = htons(ep->rxid); + srr->srr_r_ctl = r_ctl; + srr->srr_rel_off = htonl(offset); + + fc_fill_fc_hdr(fp, FC_RCTL_ELS4_REQ, rport->port_id, + fc_host_port_id(rp->local_port->host), FC_TYPE_FCP, + FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0); + + seq = lp->tt.exch_seq_send(lp, fp, fc_fcp_srr_resp, NULL, + fsp, jiffies_to_msecs(FC_SCSI_REC_TOV)); + if (!seq) { + fc_frame_free(fp); + goto retry; + } + fsp->recov_seq = seq; + fsp->xfer_len = offset; + fsp->xfer_contig_end = offset; + fsp->state &= ~FC_SRB_RCV_STATUS; + fc_fcp_pkt_hold(fsp); /* hold for outstanding SRR */ + return; +retry: + fc_fcp_retry_cmd(fsp); +} + +/* + * Handle response from SRR. + */ +static void fc_fcp_srr_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg) +{ + struct fc_fcp_pkt *fsp = arg; + struct fc_frame_header *fh; + + if (IS_ERR(fp)) { + fc_fcp_srr_error(fsp, fp); + return; + } + + if (fc_fcp_lock_pkt(fsp)) + goto out; + + fh = fc_frame_header_get(fp); + /* + * BUG? fc_fcp_srr_error calls exch_done which would release + * the ep. But if fc_fcp_srr_error had got -FC_EX_TIMEOUT, + * then fc_exch_timeout would be sending an abort. The exch_done + * call by fc_fcp_srr_error would prevent fc_exch.c from seeing + * an abort response though. + */ + if (fh->fh_type == FC_TYPE_BLS) { + fc_fcp_unlock_pkt(fsp); + return; + } + + fsp->recov_seq = NULL; + switch (fc_frame_payload_op(fp)) { + case ELS_LS_ACC: + fsp->recov_retry = 0; + fc_fcp_timer_set(fsp, FC_SCSI_REC_TOV); + break; + case ELS_LS_RJT: + default: + fc_timeout_error(fsp); + break; + } + fc_fcp_unlock_pkt(fsp); + fsp->lp->tt.exch_done(seq); +out: + fc_frame_free(fp); + fc_fcp_pkt_release(fsp); /* drop hold for outstanding SRR */ +} + +static void fc_fcp_srr_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp) +{ + if (fc_fcp_lock_pkt(fsp)) + goto out; + fsp->lp->tt.exch_done(fsp->recov_seq); + fsp->recov_seq = NULL; + switch (PTR_ERR(fp)) { + case -FC_EX_TIMEOUT: + if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY) + fc_fcp_rec(fsp); + else + fc_timeout_error(fsp); + break; + case -FC_EX_CLOSED: /* e.g., link failure */ + /* fall through */ + default: + fc_fcp_retry_cmd(fsp); + break; + } + fc_fcp_unlock_pkt(fsp); +out: + fc_fcp_pkt_release(fsp); /* drop hold for outstanding SRR */ +} + +static inline int fc_fcp_lport_queue_ready(struct fc_lport *lp) +{ + /* lock ? */ + return (lp->state == LPORT_ST_READY) && (lp->link_status & FC_LINK_UP); +} + +/** + * fc_queuecommand - The queuecommand function of the scsi template + * @cmd: struct scsi_cmnd to be executed + * @done: Callback function to be called when cmd is completed + * + * this is the i/o strategy routine, called by the scsi layer + * this routine is called with holding the host_lock. + */ +int fc_queuecommand(struct scsi_cmnd *sc_cmd, void (*done)(struct scsi_cmnd *)) +{ + struct fc_lport *lp; + struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device)); + struct fc_fcp_pkt *fsp; + struct fc_rport_libfc_priv *rp; + int rval; + int rc = 0; + struct fcoe_dev_stats *stats; + + lp = shost_priv(sc_cmd->device->host); + + rval = fc_remote_port_chkready(rport); + if (rval) { + sc_cmd->result = rval; + done(sc_cmd); + goto out; + } + + if (!*(struct fc_remote_port **)rport->dd_data) { + /* + * rport is transitioning from blocked/deleted to + * online + */ + sc_cmd->result = DID_IMM_RETRY << 16; + done(sc_cmd); + goto out; + } + + rp = rport->dd_data; + + if (!fc_fcp_lport_queue_ready(lp)) { + rc = SCSI_MLQUEUE_HOST_BUSY; + goto out; + } + + fsp = fc_fcp_pkt_alloc(lp, GFP_ATOMIC); + if (fsp == NULL) { + rc = SCSI_MLQUEUE_HOST_BUSY; + goto out; + } + + /* + * build the libfc request pkt + */ + fsp->cmd = sc_cmd; /* save the cmd */ + fsp->lp = lp; /* save the softc ptr */ + fsp->rport = rport; /* set the remote port ptr */ + sc_cmd->scsi_done = done; + + /* + * set up the transfer length + */ + fsp->data_len = scsi_bufflen(sc_cmd); + fsp->xfer_len = 0; + + /* + * setup the data direction + */ + stats = lp->dev_stats[smp_processor_id()]; + if (sc_cmd->sc_data_direction == DMA_FROM_DEVICE) { + fsp->req_flags = FC_SRB_READ; + stats->InputRequests++; + stats->InputMegabytes = fsp->data_len; + } else if (sc_cmd->sc_data_direction == DMA_TO_DEVICE) { + fsp->req_flags = FC_SRB_WRITE; + stats->OutputRequests++; + stats->OutputMegabytes = fsp->data_len; + } else { + fsp->req_flags = 0; + stats->ControlRequests++; + } + + fsp->tgt_flags = rp->flags; + + init_timer(&fsp->timer); + fsp->timer.data = (unsigned long)fsp; + + /* + * send it to the lower layer + * if we get -1 return then put the request in the pending + * queue. + */ + rval = fc_fcp_pkt_send(lp, fsp); + if (rval != 0) { + fsp->state = FC_SRB_FREE; + fc_fcp_pkt_release(fsp); + rc = SCSI_MLQUEUE_HOST_BUSY; + } +out: + return rc; +} +EXPORT_SYMBOL(fc_queuecommand); + +/** + * fc_io_compl - Handle responses for completed commands + * @fsp: scsi packet + * + * Translates a error to a Linux SCSI error. + * + * The fcp packet lock must be held when calling. + */ +static void fc_io_compl(struct fc_fcp_pkt *fsp) +{ + struct fc_fcp_internal *si; + struct scsi_cmnd *sc_cmd; + struct fc_lport *lp; + unsigned long flags; + + fsp->state |= FC_SRB_COMPL; + if (!(fsp->state & FC_SRB_FCP_PROCESSING_TMO)) { + spin_unlock_bh(&fsp->scsi_pkt_lock); + del_timer_sync(&fsp->timer); + spin_lock_bh(&fsp->scsi_pkt_lock); + } + + lp = fsp->lp; + si = fc_get_scsi_internal(lp); + spin_lock_irqsave(lp->host->host_lock, flags); + if (!fsp->cmd) { + spin_unlock_irqrestore(lp->host->host_lock, flags); + return; + } + + /* + * if a command timed out while we had to try and throttle IO + * and it is now getting cleaned up, then we are about to + * try again so clear the throttled flag incase we get more + * time outs. + */ + if (si->throttled && fsp->state & FC_SRB_NOMEM) + si->throttled = 0; + + sc_cmd = fsp->cmd; + fsp->cmd = NULL; + + if (!sc_cmd->SCp.ptr) { + spin_unlock_irqrestore(lp->host->host_lock, flags); + return; + } + + CMD_SCSI_STATUS(sc_cmd) = fsp->cdb_status; + switch (fsp->status_code) { + case FC_COMPLETE: + if (fsp->cdb_status == 0) { + /* + * good I/O status + */ + sc_cmd->result = DID_OK << 16; + if (fsp->scsi_resid) + CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid; + } else if (fsp->cdb_status == QUEUE_FULL) { + struct scsi_device *tmp_sdev; + struct scsi_device *sdev = sc_cmd->device; + + shost_for_each_device(tmp_sdev, sdev->host) { + if (tmp_sdev->id != sdev->id) + continue; + + if (tmp_sdev->queue_depth > 1) { + scsi_track_queue_full(tmp_sdev, + tmp_sdev-> + queue_depth - 1); + } + } + sc_cmd->result = (DID_OK << 16) | fsp->cdb_status; + } else { + /* + * transport level I/O was ok but scsi + * has non zero status + */ + sc_cmd->result = (DID_OK << 16) | fsp->cdb_status; + } + break; + case FC_ERROR: + sc_cmd->result = DID_ERROR << 16; + break; + case FC_DATA_UNDRUN: + if (fsp->cdb_status == 0) { + /* + * scsi status is good but transport level + * underrun. for read it should be an error?? + */ + sc_cmd->result = (DID_OK << 16) | fsp->cdb_status; + } else { + /* + * scsi got underrun, this is an error + */ + CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid; + sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status; + } + break; + case FC_DATA_OVRRUN: + /* + * overrun is an error + */ + sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status; + break; + case FC_CMD_ABORTED: + sc_cmd->result = (DID_ABORT << 16) | fsp->io_status; + break; + case FC_CMD_TIME_OUT: + sc_cmd->result = (DID_BUS_BUSY << 16) | fsp->io_status; + break; + case FC_CMD_RESET: + sc_cmd->result = (DID_RESET << 16); + break; + case FC_HRD_ERROR: + sc_cmd->result = (DID_NO_CONNECT << 16); + break; + default: + sc_cmd->result = (DID_ERROR << 16); + break; + } + + list_del(&fsp->list); + sc_cmd->SCp.ptr = NULL; + sc_cmd->scsi_done(sc_cmd); + spin_unlock_irqrestore(lp->host->host_lock, flags); + + /* release ref from initial allocation in queue command */ + fc_fcp_pkt_release(fsp); +} + +/** + * fc_fcp_complete - complete processing of a fcp packet + * @fsp: fcp packet + * + * This function may sleep if a fsp timer is pending. + * The host lock must not be held by caller. + */ +void fc_fcp_complete(struct fc_fcp_pkt *fsp) +{ + if (fc_fcp_lock_pkt(fsp)) + return; + + fc_fcp_complete_locked(fsp); + fc_fcp_unlock_pkt(fsp); +} +EXPORT_SYMBOL(fc_fcp_complete); + +/** + * fc_eh_abort - Abort a command...from scsi host template + * @sc_cmd: scsi command to abort + * + * send ABTS to the target device and wait for the response + * sc_cmd is the pointer to the command to be aborted. + */ +int fc_eh_abort(struct scsi_cmnd *sc_cmd) +{ + struct fc_fcp_pkt *fsp; + struct fc_lport *lp; + int rc = FAILED; + unsigned long flags; + + lp = shost_priv(sc_cmd->device->host); + if (lp->state != LPORT_ST_READY) + return rc; + else if (!(lp->link_status & FC_LINK_UP)) + return rc; + + spin_lock_irqsave(lp->host->host_lock, flags); + fsp = CMD_SP(sc_cmd); + if (!fsp) { + /* command completed while scsi eh was setting up */ + spin_unlock_irqrestore(lp->host->host_lock, flags); + return SUCCESS; + } + /* grab a ref so the fsp and sc_cmd cannot be relased from under us */ + fc_fcp_pkt_hold(fsp); + spin_unlock_irqrestore(lp->host->host_lock, flags); + + if (fc_fcp_lock_pkt(fsp)) { + /* completed while we were waiting for timer to be deleted */ + rc = SUCCESS; + goto release_pkt; + } + + rc = fc_fcp_pkt_abort(lp, fsp); + fc_fcp_unlock_pkt(fsp); + +release_pkt: + fc_fcp_pkt_release(fsp); + return rc; +} +EXPORT_SYMBOL(fc_eh_abort); + +/** + * fc_eh_device_reset: Reset a single LUN + * @sc_cmd: scsi command + * + * Set from scsi host template to send tm cmd to the target and wait for the + * response. + */ +int fc_eh_device_reset(struct scsi_cmnd *sc_cmd) +{ + struct fc_lport *lp; + struct fc_fcp_pkt *fsp; + struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device)); + int rc = FAILED; + struct fc_rport_libfc_priv *rp; + int rval; + + rval = fc_remote_port_chkready(rport); + if (rval) + goto out; + + rp = rport->dd_data; + lp = shost_priv(sc_cmd->device->host); + + if (lp->state != LPORT_ST_READY) + return rc; + + fsp = fc_fcp_pkt_alloc(lp, GFP_NOIO); + if (fsp == NULL) { + FC_DBG("could not allocate scsi_pkt\n"); + sc_cmd->result = DID_NO_CONNECT << 16; + goto out; + } + + /* + * Build the libfc request pkt. Do not set the scsi cmnd, because + * the sc passed in is not setup for execution like when sent + * through the queuecommand callout. + */ + fsp->lp = lp; /* save the softc ptr */ + fsp->rport = rport; /* set the remote port ptr */ + + /* + * flush outstanding commands + */ + rc = fc_lun_reset(lp, fsp, scmd_id(sc_cmd), sc_cmd->device->lun); + fsp->state = FC_SRB_FREE; + fc_fcp_pkt_release(fsp); + +out: + return rc; +} +EXPORT_SYMBOL(fc_eh_device_reset); + +/** + * fc_eh_host_reset - The reset function will reset the ports on the host. + * @sc_cmd: scsi command + */ +int fc_eh_host_reset(struct scsi_cmnd *sc_cmd) +{ + struct Scsi_Host *shost = sc_cmd->device->host; + struct fc_lport *lp = shost_priv(shost); + unsigned long wait_tmo; + + lp->tt.lport_reset(lp); + wait_tmo = jiffies + FC_HOST_RESET_TIMEOUT; + while (!fc_fcp_lport_queue_ready(lp) && time_before(jiffies, wait_tmo)) + msleep(1000); + + if (fc_fcp_lport_queue_ready(lp)) { + shost_printk(KERN_INFO, shost, "Host reset succeeded.\n"); + return SUCCESS; + } else { + shost_printk(KERN_INFO, shost, "Host reset failed. " + "lport not ready.\n"); + return FAILED; + } +} +EXPORT_SYMBOL(fc_eh_host_reset); + +/** + * fc_slave_alloc - configure queue depth + * @sdev: scsi device + * + * Configures queue depth based on host's cmd_per_len. If not set + * then we use the libfc default. + */ +int fc_slave_alloc(struct scsi_device *sdev) +{ + struct fc_rport *rport = starget_to_rport(scsi_target(sdev)); + int queue_depth; + + if (!rport || fc_remote_port_chkready(rport)) + return -ENXIO; + + if (sdev->tagged_supported) { + if (sdev->host->hostt->cmd_per_lun) + queue_depth = sdev->host->hostt->cmd_per_lun; + else + queue_depth = FC_FCP_DFLT_QUEUE_DEPTH; + scsi_activate_tcq(sdev, queue_depth); + } + return 0; +} +EXPORT_SYMBOL(fc_slave_alloc); + +int fc_change_queue_depth(struct scsi_device *sdev, int qdepth) +{ + scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth); + return sdev->queue_depth; +} +EXPORT_SYMBOL(fc_change_queue_depth); + +int fc_change_queue_type(struct scsi_device *sdev, int tag_type) +{ + if (sdev->tagged_supported) { + scsi_set_tag_type(sdev, tag_type); + if (tag_type) + scsi_activate_tcq(sdev, sdev->queue_depth); + else + scsi_deactivate_tcq(sdev, sdev->queue_depth); + } else + tag_type = 0; + + return tag_type; +} +EXPORT_SYMBOL(fc_change_queue_type); + +void fc_fcp_destroy(struct fc_lport *lp) +{ + struct fc_fcp_internal *si = fc_get_scsi_internal(lp); + + if (!list_empty(&si->scsi_pkt_queue)) + printk(KERN_ERR "Leaked scsi packets.\n"); + + mempool_destroy(si->scsi_pkt_pool); + kfree(si); + lp->scsi_priv = NULL; +} +EXPORT_SYMBOL(fc_fcp_destroy); + +int fc_fcp_init(struct fc_lport *lp) +{ + int rc; + struct fc_fcp_internal *si; + + if (!lp->tt.fcp_cmd_send) + lp->tt.fcp_cmd_send = fc_fcp_cmd_send; + + if (!lp->tt.fcp_cleanup) + lp->tt.fcp_cleanup = fc_fcp_cleanup; + + if (!lp->tt.fcp_abort_io) + lp->tt.fcp_abort_io = fc_fcp_abort_io; + + si = kzalloc(sizeof(struct fc_fcp_internal), GFP_KERNEL); + if (!si) + return -ENOMEM; + lp->scsi_priv = si; + INIT_LIST_HEAD(&si->scsi_pkt_queue); + + si->scsi_pkt_pool = mempool_create_slab_pool(2, scsi_pkt_cachep); + if (!si->scsi_pkt_pool) { + rc = -ENOMEM; + goto free_internal; + } + return 0; + +free_internal: + kfree(si); + return rc; +} +EXPORT_SYMBOL(fc_fcp_init); + +static int __init libfc_init(void) +{ + int rc; + + scsi_pkt_cachep = kmem_cache_create("libfc_fcp_pkt", + sizeof(struct fc_fcp_pkt), + 0, SLAB_HWCACHE_ALIGN, NULL); + if (scsi_pkt_cachep == NULL) { + FC_DBG("Unable to allocate SRB cache...module load failed!"); + return -ENOMEM; + } + + rc = fc_setup_exch_mgr(); + if (rc) + goto destroy_pkt_cache; + + rc = fc_setup_rport(); + if (rc) + goto destroy_em; + + return rc; +destroy_em: + fc_destroy_exch_mgr(); +destroy_pkt_cache: + kmem_cache_destroy(scsi_pkt_cachep); + return rc; +} + +static void __exit libfc_exit(void) +{ + kmem_cache_destroy(scsi_pkt_cachep); + fc_destroy_exch_mgr(); + fc_destroy_rport(); +} + +module_init(libfc_init); +module_exit(libfc_exit); diff --git a/drivers/scsi/libfc/fc_frame.c b/drivers/scsi/libfc/fc_frame.c new file mode 100644 index 0000000..63fe00c --- /dev/null +++ b/drivers/scsi/libfc/fc_frame.c @@ -0,0 +1,89 @@ +/* + * Copyright(c) 2007 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Maintained at www.Open-FCoE.org + */ + +/* + * Frame allocation. + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/skbuff.h> +#include <linux/crc32.h> + +#include <scsi/fc_frame.h> + +/* + * Check the CRC in a frame. + */ +u32 fc_frame_crc_check(struct fc_frame *fp) +{ + u32 crc; + u32 error; + const u8 *bp; + unsigned int len; + + WARN_ON(!fc_frame_is_linear(fp)); + fr_flags(fp) &= ~FCPHF_CRC_UNCHECKED; + len = (fr_len(fp) + 3) & ~3; /* round up length to include fill */ + bp = (const u8 *) fr_hdr(fp); + crc = ~crc32(~0, bp, len); + error = crc ^ fr_crc(fp); + return error; +} +EXPORT_SYMBOL(fc_frame_crc_check); + +/* + * Allocate a frame intended to be sent via fcoe_xmit. + * Get an sk_buff for the frame and set the length. + */ +struct fc_frame *__fc_frame_alloc(size_t len) +{ + struct fc_frame *fp; + struct sk_buff *skb; + + WARN_ON((len % sizeof(u32)) != 0); + len += sizeof(struct fc_frame_header); + skb = dev_alloc_skb(len + FC_FRAME_HEADROOM + FC_FRAME_TAILROOM); + if (!skb) + return NULL; + fp = (struct fc_frame *) skb; + fc_frame_init(fp); + skb_reserve(skb, FC_FRAME_HEADROOM); + skb_put(skb, len); + return fp; +} +EXPORT_SYMBOL(__fc_frame_alloc); + + +struct fc_frame *fc_frame_alloc_fill(struct fc_lport *lp, size_t payload_len) +{ + struct fc_frame *fp; + size_t fill; + + fill = payload_len % 4; + if (fill != 0) + fill = 4 - fill; + fp = __fc_frame_alloc(payload_len + fill); + if (fp) { + memset((char *) fr_hdr(fp) + payload_len, 0, fill); + /* trim is OK, we just allocated it so there are no fragments */ + skb_trim(fp_skb(fp), + payload_len + sizeof(struct fc_frame_header)); + } + return fp; +} diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c new file mode 100644 index 0000000..0b9bdb1 --- /dev/null +++ b/drivers/scsi/libfc/fc_lport.c @@ -0,0 +1,1604 @@ +/* + * Copyright(c) 2007 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Maintained at www.Open-FCoE.org + */ + +/* + * PORT LOCKING NOTES + * + * These comments only apply to the 'port code' which consists of the lport, + * disc and rport blocks. + * + * MOTIVATION + * + * The lport, disc and rport blocks all have mutexes that are used to protect + * those objects. The main motivation for these locks is to prevent from + * having an lport reset just before we send a frame. In that scenario the + * lport's FID would get set to zero and then we'd send a frame with an + * invalid SID. We also need to ensure that states don't change unexpectedly + * while processing another state. + * + * HEIRARCHY + * + * The following heirarchy defines the locking rules. A greater lock + * may be held before acquiring a lesser lock, but a lesser lock should never + * be held while attempting to acquire a greater lock. Here is the heirarchy- + * + * lport > disc, lport > rport, disc > rport + * + * CALLBACKS + * + * The callbacks cause complications with this scheme. There is a callback + * from the rport (to either lport or disc) and a callback from disc + * (to the lport). + * + * As rports exit the rport state machine a callback is made to the owner of + * the rport to notify success or failure. Since the callback is likely to + * cause the lport or disc to grab its lock we cannot hold the rport lock + * while making the callback. To ensure that the rport is not free'd while + * processing the callback the rport callbacks are serialized through a + * single-threaded workqueue. An rport would never be free'd while in a + * callback handler becuase no other rport work in this queue can be executed + * at the same time. + * + * When discovery succeeds or fails a callback is made to the lport as + * notification. Currently, succesful discovery causes the lport to take no + * action. A failure will cause the lport to reset. There is likely a circular + * locking problem with this implementation. + */ + +/* + * LPORT LOCKING + * + * The critical sections protected by the lport's mutex are quite broad and + * may be improved upon in the future. The lport code and its locking doesn't + * influence the I/O path, so excessive locking doesn't penalize I/O + * performance. + * + * The strategy is to lock whenever processing a request or response. Note + * that every _enter_* function corresponds to a state change. They generally + * change the lports state and then send a request out on the wire. We lock + * before calling any of these functions to protect that state change. This + * means that the entry points into the lport block manage the locks while + * the state machine can transition between states (i.e. _enter_* functions) + * while always staying protected. + * + * When handling responses we also hold the lport mutex broadly. When the + * lport receives the response frame it locks the mutex and then calls the + * appropriate handler for the particuar response. Generally a response will + * trigger a state change and so the lock must already be held. + * + * Retries also have to consider the locking. The retries occur from a work + * context and the work function will lock the lport and then retry the state + * (i.e. _enter_* function). + */ + +#include <linux/timer.h> +#include <asm/unaligned.h> + +#include <scsi/fc/fc_gs.h> + +#include <scsi/libfc.h> +#include <scsi/fc_encode.h> + +/* Fabric IDs to use for point-to-point mode, chosen on whims. */ +#define FC_LOCAL_PTP_FID_LO 0x010101 +#define FC_LOCAL_PTP_FID_HI 0x010102 + +#define DNS_DELAY 3 /* Discovery delay after RSCN (in seconds)*/ + +static int fc_lport_debug; + +#define FC_DEBUG_LPORT(fmt...) \ + do { \ + if (fc_lport_debug) \ + FC_DBG(fmt); \ + } while (0) + +static void fc_lport_error(struct fc_lport *, struct fc_frame *); + +static void fc_lport_enter_reset(struct fc_lport *); +static void fc_lport_enter_flogi(struct fc_lport *); +static void fc_lport_enter_dns(struct fc_lport *); +static void fc_lport_enter_rpn_id(struct fc_lport *); +static void fc_lport_enter_rft_id(struct fc_lport *); +static void fc_lport_enter_scr(struct fc_lport *); +static void fc_lport_enter_ready(struct fc_lport *); +static void fc_lport_enter_logo(struct fc_lport *); + +static const char *fc_lport_state_names[] = { + [LPORT_ST_NONE] = "none", + [LPORT_ST_FLOGI] = "FLOGI", + [LPORT_ST_DNS] = "dNS", + [LPORT_ST_RPN_ID] = "RPN_ID", + [LPORT_ST_RFT_ID] = "RFT_ID", + [LPORT_ST_SCR] = "SCR", + [LPORT_ST_READY] = "Ready", + [LPORT_ST_LOGO] = "LOGO", + [LPORT_ST_RESET] = "reset", +}; + +static int fc_frame_drop(struct fc_lport *lport, struct fc_frame *fp) +{ + fc_frame_free(fp); + return 0; +} + +/** + * fc_lport_rport_callback - Event handler for rport events + * @lport: The lport which is receiving the event + * @rport: The rport which the event has occured on + * @event: The event that occured + * + * Locking Note: The rport lock should not be held when calling + * this function. + */ +static void fc_lport_rport_callback(struct fc_lport *lport, + struct fc_rport *rport, + enum fc_rport_event event) +{ + FC_DEBUG_LPORT("Received a %d event for port (%6x)\n", event, + rport->port_id); + + switch (event) { + case RPORT_EV_CREATED: + if (rport->port_id == FC_FID_DIR_SERV) { + mutex_lock(&lport->lp_mutex); + if (lport->state == LPORT_ST_DNS) { + lport->dns_rp = rport; + fc_lport_enter_rpn_id(lport); + } else { + FC_DEBUG_LPORT("Received an CREATED event on " + "port (%6x) for the directory " + "server, but the lport is not " + "in the DNS state, it's in the " + "%d state", rport->port_id, + lport->state); + lport->tt.rport_logoff(rport); + } + mutex_unlock(&lport->lp_mutex); + } else + FC_DEBUG_LPORT("Received an event for port (%6x) " + "which is not the directory server\n", + rport->port_id); + break; + case RPORT_EV_LOGO: + case RPORT_EV_FAILED: + case RPORT_EV_STOP: + if (rport->port_id == FC_FID_DIR_SERV) { + mutex_lock(&lport->lp_mutex); + lport->dns_rp = NULL; + mutex_unlock(&lport->lp_mutex); + + } else + FC_DEBUG_LPORT("Received an event for port (%6x) " + "which is not the directory server\n", + rport->port_id); + break; + case RPORT_EV_NONE: + break; + } +} + +/** + * fc_lport_state - Return a string which represents the lport's state + * @lport: The lport whose state is to converted to a string + */ +static const char *fc_lport_state(struct fc_lport *lport) +{ + const char *cp; + + cp = fc_lport_state_names[lport->state]; + if (!cp) + cp = "unknown"; + return cp; +} + +/** + * fc_lport_ptp_setup - Create an rport for point-to-point mode + * @lport: The lport to attach the ptp rport to + * @fid: The FID of the ptp rport + * @remote_wwpn: The WWPN of the ptp rport + * @remote_wwnn: The WWNN of the ptp rport + */ +static void fc_lport_ptp_setup(struct fc_lport *lport, + u32 remote_fid, u64 remote_wwpn, + u64 remote_wwnn) +{ + struct fc_disc_port dp; + + dp.lp = lport; + dp.ids.port_id = remote_fid; + dp.ids.port_name = remote_wwpn; + dp.ids.node_name = remote_wwnn; + dp.ids.roles = FC_RPORT_ROLE_UNKNOWN; + + if (lport->ptp_rp) { + lport->tt.rport_logoff(lport->ptp_rp); + lport->ptp_rp = NULL; + } + + lport->ptp_rp = fc_rport_rogue_create(&dp); + + lport->tt.rport_login(lport->ptp_rp); + + fc_lport_enter_ready(lport); +} + +void fc_get_host_port_type(struct Scsi_Host *shost) +{ + /* TODO - currently just NPORT */ + fc_host_port_type(shost) = FC_PORTTYPE_NPORT; +} +EXPORT_SYMBOL(fc_get_host_port_type); + +void fc_get_host_port_state(struct Scsi_Host *shost) +{ + struct fc_lport *lp = shost_priv(shost); + + if ((lp->link_status & FC_LINK_UP) == FC_LINK_UP) + fc_host_port_state(shost) = FC_PORTSTATE_ONLINE; + else + fc_host_port_state(shost) = FC_PORTSTATE_OFFLINE; +} +EXPORT_SYMBOL(fc_get_host_port_state); + +void fc_get_host_speed(struct Scsi_Host *shost) +{ + struct fc_lport *lport = shost_priv(shost); + + fc_host_speed(shost) = lport->link_speed; +} +EXPORT_SYMBOL(fc_get_host_speed); + +struct fc_host_statistics *fc_get_host_stats(struct Scsi_Host *shost) +{ + int i; + struct fc_host_statistics *fcoe_stats; + struct fc_lport *lp = shost_priv(shost); + struct timespec v0, v1; + + fcoe_stats = &lp->host_stats; + memset(fcoe_stats, 0, sizeof(struct fc_host_statistics)); + + jiffies_to_timespec(jiffies, &v0); + jiffies_to_timespec(lp->boot_time, &v1); + fcoe_stats->seconds_since_last_reset = (v0.tv_sec - v1.tv_sec); + + for_each_online_cpu(i) { + struct fcoe_dev_stats *stats = lp->dev_stats[i]; + if (stats == NULL) + continue; + fcoe_stats->tx_frames += stats->TxFrames; + fcoe_stats->tx_words += stats->TxWords; + fcoe_stats->rx_frames += stats->RxFrames; + fcoe_stats->rx_words += stats->RxWords; + fcoe_stats->error_frames += stats->ErrorFrames; + fcoe_stats->invalid_crc_count += stats->InvalidCRCCount; + fcoe_stats->fcp_input_requests += stats->InputRequests; + fcoe_stats->fcp_output_requests += stats->OutputRequests; + fcoe_stats->fcp_control_requests += stats->ControlRequests; + fcoe_stats->fcp_input_megabytes += stats->InputMegabytes; + fcoe_stats->fcp_output_megabytes += stats->OutputMegabytes; + fcoe_stats->link_failure_count += stats->LinkFailureCount; + } + fcoe_stats->lip_count = -1; + fcoe_stats->nos_count = -1; + fcoe_stats->loss_of_sync_count = -1; + fcoe_stats->loss_of_signal_count = -1; + fcoe_stats->prim_seq_protocol_err_count = -1; + fcoe_stats->dumped_frames = -1; + return fcoe_stats; +} +EXPORT_SYMBOL(fc_get_host_stats); + +/* + * Fill in FLOGI command for request. + */ +static void +fc_lport_flogi_fill(struct fc_lport *lport, struct fc_els_flogi *flogi, + unsigned int op) +{ + struct fc_els_csp *sp; + struct fc_els_cssp *cp; + + memset(flogi, 0, sizeof(*flogi)); + flogi->fl_cmd = (u8) op; + put_unaligned_be64(lport->wwpn, &flogi->fl_wwpn); + put_unaligned_be64(lport->wwnn, &flogi->fl_wwnn); + sp = &flogi->fl_csp; + sp->sp_hi_ver = 0x20; + sp->sp_lo_ver = 0x20; + sp->sp_bb_cred = htons(10); /* this gets set by gateway */ + sp->sp_bb_data = htons((u16) lport->mfs); + cp = &flogi->fl_cssp[3 - 1]; /* class 3 parameters */ + cp->cp_class = htons(FC_CPC_VALID | FC_CPC_SEQ); + if (op != ELS_FLOGI) { + sp->sp_features = htons(FC_SP_FT_CIRO); + sp->sp_tot_seq = htons(255); /* seq. we accept */ + sp->sp_rel_off = htons(0x1f); + sp->sp_e_d_tov = htonl(lport->e_d_tov); + + cp->cp_rdfs = htons((u16) lport->mfs); + cp->cp_con_seq = htons(255); + cp->cp_open_seq = 1; + } +} + +/* + * Add a supported FC-4 type. + */ +static void fc_lport_add_fc4_type(struct fc_lport *lport, enum fc_fh_type type) +{ + __be32 *mp; + + mp = &lport->fcts.ff_type_map[type / FC_NS_BPW]; + *mp = htonl(ntohl(*mp) | 1UL << (type % FC_NS_BPW)); +} + +/** + * fc_lport_recv_rlir_req - Handle received Registered Link Incident Report. + * @lport: Fibre Channel local port recieving the RLIR + * @sp: current sequence in the RLIR exchange + * @fp: RLIR request frame + * + * Locking Note: The lport lock is exected to be held before calling + * this function. + */ +static void fc_lport_recv_rlir_req(struct fc_seq *sp, struct fc_frame *fp, + struct fc_lport *lport) +{ + FC_DEBUG_LPORT("Received RLIR request while in state %s\n", + fc_lport_state(lport)); + + lport->tt.seq_els_rsp_send(sp, ELS_LS_ACC, NULL); + fc_frame_free(fp); +} + +/** + * fc_lport_recv_echo_req - Handle received ECHO request + * @lport: Fibre Channel local port recieving the ECHO + * @sp: current sequence in the ECHO exchange + * @fp: ECHO request frame + * + * Locking Note: The lport lock is exected to be held before calling + * this function. + */ +static void fc_lport_recv_echo_req(struct fc_seq *sp, struct fc_frame *in_fp, + struct fc_lport *lport) +{ + struct fc_frame *fp; + struct fc_exch *ep = fc_seq_exch(sp); + unsigned int len; + void *pp; + void *dp; + u32 f_ctl; + + FC_DEBUG_LPORT("Received RLIR request while in state %s\n", + fc_lport_state(lport)); + + len = fr_len(in_fp) - sizeof(struct fc_frame_header); + pp = fc_frame_payload_get(in_fp, len); + + if (len < sizeof(__be32)) + len = sizeof(__be32); + + fp = fc_frame_alloc(lport, len); + if (fp) { + dp = fc_frame_payload_get(fp, len); + memcpy(dp, pp, len); + *((u32 *)dp) = htonl(ELS_LS_ACC << 24); + sp = lport->tt.seq_start_next(sp); + f_ctl = FC_FC_EX_CTX | FC_FC_LAST_SEQ | FC_FC_END_SEQ; + fc_fill_fc_hdr(fp, FC_RCTL_ELS_REP, ep->did, ep->sid, + FC_TYPE_ELS, f_ctl, 0); + lport->tt.seq_send(lport, sp, fp); + } + fc_frame_free(in_fp); +} + +/** + * fc_lport_recv_echo_req - Handle received Request Node ID data request + * @lport: Fibre Channel local port recieving the RNID + * @sp: current sequence in the RNID exchange + * @fp: RNID request frame + * + * Locking Note: The lport lock is exected to be held before calling + * this function. + */ +static void fc_lport_recv_rnid_req(struct fc_seq *sp, struct fc_frame *in_fp, + struct fc_lport *lport) +{ + struct fc_frame *fp; + struct fc_exch *ep = fc_seq_exch(sp); + struct fc_els_rnid *req; + struct { + struct fc_els_rnid_resp rnid; + struct fc_els_rnid_cid cid; + struct fc_els_rnid_gen gen; + } *rp; + struct fc_seq_els_data rjt_data; + u8 fmt; + size_t len; + u32 f_ctl; + + FC_DEBUG_LPORT("Received RNID request while in state %s\n", + fc_lport_state(lport)); + + req = fc_frame_payload_get(in_fp, sizeof(*req)); + if (!req) { + rjt_data.fp = NULL; + rjt_data.reason = ELS_RJT_LOGIC; + rjt_data.explan = ELS_EXPL_NONE; + lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &rjt_data); + } else { + fmt = req->rnid_fmt; + len = sizeof(*rp); + if (fmt != ELS_RNIDF_GEN || + ntohl(lport->rnid_gen.rnid_atype) == 0) { + fmt = ELS_RNIDF_NONE; /* nothing to provide */ + len -= sizeof(rp->gen); + } + fp = fc_frame_alloc(lport, len); + if (fp) { + rp = fc_frame_payload_get(fp, len); + memset(rp, 0, len); + rp->rnid.rnid_cmd = ELS_LS_ACC; + rp->rnid.rnid_fmt = fmt; + rp->rnid.rnid_cid_len = sizeof(rp->cid); + rp->cid.rnid_wwpn = htonll(lport->wwpn); + rp->cid.rnid_wwnn = htonll(lport->wwnn); + if (fmt == ELS_RNIDF_GEN) { + rp->rnid.rnid_sid_len = sizeof(rp->gen); + memcpy(&rp->gen, &lport->rnid_gen, + sizeof(rp->gen)); + } + sp = lport->tt.seq_start_next(sp); + f_ctl = FC_FC_EX_CTX | FC_FC_LAST_SEQ; + f_ctl |= FC_FC_END_SEQ | FC_FC_SEQ_INIT; + fc_fill_fc_hdr(fp, FC_RCTL_ELS_REP, ep->did, ep->sid, + FC_TYPE_ELS, f_ctl, 0); + lport->tt.seq_send(lport, sp, fp); + } + } + fc_frame_free(in_fp); +} + +/** + * fc_lport_recv_adisc_req - Handle received Address Discovery Request + * @lport: Fibre Channel local port recieving the ADISC + * @sp: current sequence in the ADISC exchange + * @fp: ADISC request frame + * + * Locking Note: The lport lock is expected to be held before calling + * this function. + */ +static void fc_lport_recv_adisc_req(struct fc_seq *sp, struct fc_frame *in_fp, + struct fc_lport *lport) +{ + struct fc_frame *fp; + struct fc_exch *ep = fc_seq_exch(sp); + struct fc_els_adisc *req, *rp; + struct fc_seq_els_data rjt_data; + size_t len; + u32 f_ctl; + + FC_DEBUG_LPORT("Received ADISC request while in state %s\n", + fc_lport_state(lport)); + + req = fc_frame_payload_get(in_fp, sizeof(*req)); + if (!req) { + rjt_data.fp = NULL; + rjt_data.reason = ELS_RJT_LOGIC; + rjt_data.explan = ELS_EXPL_NONE; + lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &rjt_data); + } else { + len = sizeof(*rp); + fp = fc_frame_alloc(lport, len); + if (fp) { + rp = fc_frame_payload_get(fp, len); + memset(rp, 0, len); + rp->adisc_cmd = ELS_LS_ACC; + rp->adisc_wwpn = htonll(lport->wwpn); + rp->adisc_wwnn = htonll(lport->wwnn); + hton24(rp->adisc_port_id, + fc_host_port_id(lport->host)); + sp = lport->tt.seq_start_next(sp); + f_ctl = FC_FC_EX_CTX | FC_FC_LAST_SEQ; + f_ctl |= FC_FC_END_SEQ | FC_FC_SEQ_INIT; + fc_fill_fc_hdr(fp, FC_RCTL_ELS_REP, ep->did, ep->sid, + FC_TYPE_ELS, f_ctl, 0); + lport->tt.seq_send(lport, sp, fp); + } + } + fc_frame_free(in_fp); +} + +/** + * fc_lport_recv_logo_req - Handle received fabric LOGO request + * @lport: Fibre Channel local port recieving the LOGO + * @sp: current sequence in the LOGO exchange + * @fp: LOGO request frame + * + * Locking Note: The lport lock is exected to be held before calling + * this function. + */ +static void fc_lport_recv_logo_req(struct fc_seq *sp, struct fc_frame *fp, + struct fc_lport *lport) +{ + lport->tt.seq_els_rsp_send(sp, ELS_LS_ACC, NULL); + fc_lport_enter_reset(lport); + fc_frame_free(fp); +} + +/** + * fc_fabric_login - Start the lport state machine + * @lport: The lport that should log into the fabric + * + * Locking Note: This function should not be called + * with the lport lock held. + */ +int fc_fabric_login(struct fc_lport *lport) +{ + int rc = -1; + + mutex_lock(&lport->lp_mutex); + if (lport->state == LPORT_ST_NONE) { + fc_lport_enter_reset(lport); + rc = 0; + } + mutex_unlock(&lport->lp_mutex); + + return rc; +} +EXPORT_SYMBOL(fc_fabric_login); + +/** + * fc_linkup - Handler for transport linkup events + * @lport: The lport whose link is up + */ +void fc_linkup(struct fc_lport *lport) +{ + FC_DEBUG_LPORT("Link is up for port (%6x)\n", + fc_host_port_id(lport->host)); + + mutex_lock(&lport->lp_mutex); + if ((lport->link_status & FC_LINK_UP) != FC_LINK_UP) { + lport->link_status |= FC_LINK_UP; + + if (lport->state == LPORT_ST_RESET) + fc_lport_enter_flogi(lport); + } + mutex_unlock(&lport->lp_mutex); +} +EXPORT_SYMBOL(fc_linkup); + +/** + * fc_linkdown - Handler for transport linkdown events + * @lport: The lport whose link is down + */ +void fc_linkdown(struct fc_lport *lport) +{ + mutex_lock(&lport->lp_mutex); + FC_DEBUG_LPORT("Link is down for port (%6x)\n", + fc_host_port_id(lport->host)); + + if ((lport->link_status & FC_LINK_UP) == FC_LINK_UP) { + lport->link_status &= ~(FC_LINK_UP); + fc_lport_enter_reset(lport); + lport->tt.fcp_cleanup(lport); + } + mutex_unlock(&lport->lp_mutex); +} +EXPORT_SYMBOL(fc_linkdown); + +/** + * fc_pause - Pause the flow of frames + * @lport: The lport to be paused + */ +void fc_pause(struct fc_lport *lport) +{ + mutex_lock(&lport->lp_mutex); + lport->link_status |= FC_PAUSE; + mutex_unlock(&lport->lp_mutex); +} +EXPORT_SYMBOL(fc_pause); + +/** + * fc_unpause - Unpause the flow of frames + * @lport: The lport to be unpaused + */ +void fc_unpause(struct fc_lport *lport) +{ + mutex_lock(&lport->lp_mutex); + lport->link_status &= ~(FC_PAUSE); + mutex_unlock(&lport->lp_mutex); +} +EXPORT_SYMBOL(fc_unpause); + +/** + * fc_fabric_logoff - Logout of the fabric + * @lport: fc_lport pointer to logoff the fabric + * + * Return value: + * 0 for success, -1 for failure + **/ +int fc_fabric_logoff(struct fc_lport *lport) +{ + lport->tt.disc_stop_final(lport); + mutex_lock(&lport->lp_mutex); + fc_lport_enter_logo(lport); + mutex_unlock(&lport->lp_mutex); + return 0; +} +EXPORT_SYMBOL(fc_fabric_logoff); + +/** + * fc_lport_destroy - unregister a fc_lport + * @lport: fc_lport pointer to unregister + * + * Return value: + * None + * Note: + * exit routine for fc_lport instance + * clean-up all the allocated memory + * and free up other system resources. + * + **/ +int fc_lport_destroy(struct fc_lport *lport) +{ + lport->tt.frame_send = fc_frame_drop; + lport->tt.fcp_abort_io(lport); + lport->tt.exch_mgr_reset(lport->emp, 0, 0); + return 0; +} +EXPORT_SYMBOL(fc_lport_destroy); + +/** + * fc_set_mfs - sets up the mfs for the corresponding fc_lport + * @lport: fc_lport pointer to unregister + * @mfs: the new mfs for fc_lport + * + * Set mfs for the given fc_lport to the new mfs. + * + * Return: 0 for success + * + **/ +int fc_set_mfs(struct fc_lport *lport, u32 mfs) +{ + unsigned int old_mfs; + int rc = -EINVAL; + + mutex_lock(&lport->lp_mutex); + + old_mfs = lport->mfs; + + if (mfs >= FC_MIN_MAX_FRAME) { + mfs &= ~3; + if (mfs > FC_MAX_FRAME) + mfs = FC_MAX_FRAME; + mfs -= sizeof(struct fc_frame_header); + lport->mfs = mfs; + rc = 0; + } + + if (!rc && mfs < old_mfs) + fc_lport_enter_reset(lport); + + mutex_unlock(&lport->lp_mutex); + + return rc; +} +EXPORT_SYMBOL(fc_set_mfs); + +/** + * fc_lport_disc_callback - Callback for discovery events + * @lport: FC local port + * @event: The discovery event + */ +void fc_lport_disc_callback(struct fc_lport *lport, enum fc_disc_event event) +{ + switch (event) { + case DISC_EV_SUCCESS: + FC_DEBUG_LPORT("Got a SUCCESS event for port (%6x)\n", + fc_host_port_id(lport->host)); + break; + case DISC_EV_FAILED: + FC_DEBUG_LPORT("Got a FAILED event for port (%6x)\n", + fc_host_port_id(lport->host)); + mutex_lock(&lport->lp_mutex); + fc_lport_enter_reset(lport); + mutex_unlock(&lport->lp_mutex); + break; + case DISC_EV_NONE: + WARN_ON(1); + break; + } +} + +/** + * fc_rport_enter_ready - Enter the ready state and start discovery + * @lport: Fibre Channel local port that is ready + * + * Locking Note: The lport lock is expected to be held before calling + * this routine. + */ +static void fc_lport_enter_ready(struct fc_lport *lport) +{ + FC_DEBUG_LPORT("Port (%6x) entered Ready from state %s\n", + fc_host_port_id(lport->host), fc_lport_state(lport)); + + fc_lport_state_enter(lport, LPORT_ST_READY); + + lport->tt.disc_start(fc_lport_disc_callback, lport); +} + +/** + * fc_lport_recv_flogi_req - Receive a FLOGI request + * @sp_in: The sequence the FLOGI is on + * @rx_fp: The frame the FLOGI is in + * @lport: The lport that recieved the request + * + * A received FLOGI request indicates a point-to-point connection. + * Accept it with the common service parameters indicating our N port. + * Set up to do a PLOGI if we have the higher-number WWPN. + * + * Locking Note: The lport lock is exected to be held before calling + * this function. + */ +static void fc_lport_recv_flogi_req(struct fc_seq *sp_in, + struct fc_frame *rx_fp, + struct fc_lport *lport) +{ + struct fc_frame *fp; + struct fc_frame_header *fh; + struct fc_seq *sp; + struct fc_exch *ep; + struct fc_els_flogi *flp; + struct fc_els_flogi *new_flp; + u64 remote_wwpn; + u32 remote_fid; + u32 local_fid; + u32 f_ctl; + + FC_DEBUG_LPORT("Received FLOGI request while in state %s\n", + fc_lport_state(lport)); + + fh = fc_frame_header_get(rx_fp); + remote_fid = ntoh24(fh->fh_s_id); + flp = fc_frame_payload_get(rx_fp, sizeof(*flp)); + if (!flp) + goto out; + remote_wwpn = get_unaligned_be64(&flp->fl_wwpn); + if (remote_wwpn == lport->wwpn) { + FC_DBG("FLOGI from port with same WWPN %llx " + "possible configuration error\n", remote_wwpn); + goto out; + } + FC_DBG("FLOGI from port WWPN %llx\n", remote_wwpn); + + /* + * XXX what is the right thing to do for FIDs? + * The originator might expect our S_ID to be 0xfffffe. + * But if so, both of us could end up with the same FID. + */ + local_fid = FC_LOCAL_PTP_FID_LO; + if (remote_wwpn < lport->wwpn) { + local_fid = FC_LOCAL_PTP_FID_HI; + if (!remote_fid || remote_fid == local_fid) + remote_fid = FC_LOCAL_PTP_FID_LO; + } else if (!remote_fid) { + remote_fid = FC_LOCAL_PTP_FID_HI; + } + + fc_host_port_id(lport->host) = local_fid; + + fp = fc_frame_alloc(lport, sizeof(*flp)); + if (fp) { + sp = lport->tt.seq_start_next(fr_seq(rx_fp)); + new_flp = fc_frame_payload_get(fp, sizeof(*flp)); + fc_lport_flogi_fill(lport, new_flp, ELS_FLOGI); + new_flp->fl_cmd = (u8) ELS_LS_ACC; + + /* + * Send the response. If this fails, the originator should + * repeat the sequence. + */ + f_ctl = FC_FC_EX_CTX | FC_FC_LAST_SEQ | FC_FC_END_SEQ; + ep = fc_seq_exch(sp); + fc_fill_fc_hdr(fp, FC_RCTL_ELS_REP, ep->did, ep->sid, + FC_TYPE_ELS, f_ctl, 0); + lport->tt.seq_send(lport, sp, fp); + + } else { + fc_lport_error(lport, fp); + } + fc_lport_ptp_setup(lport, remote_fid, remote_wwpn, + get_unaligned_be64(&flp->fl_wwnn)); + + lport->tt.disc_start(fc_lport_disc_callback, lport); + +out: + sp = fr_seq(rx_fp); + fc_frame_free(rx_fp); +} + +/** + * fc_lport_recv_req - The generic lport request handler + * @lport: The lport that received the request + * @sp: The sequence the request is on + * @fp: The frame the request is in + * + * This function will see if the lport handles the request or + * if an rport should handle the request. + * + * Locking Note: This function should not be called with the lport + * lock held becuase it will grab the lock. + */ +static void fc_lport_recv_req(struct fc_lport *lport, struct fc_seq *sp, + struct fc_frame *fp) +{ + struct fc_frame_header *fh = fc_frame_header_get(fp); + void (*recv) (struct fc_seq *, struct fc_frame *, struct fc_lport *); + struct fc_rport *rport; + u32 s_id; + u32 d_id; + struct fc_seq_els_data rjt_data; + + mutex_lock(&lport->lp_mutex); + + /* + * Handle special ELS cases like FLOGI, LOGO, and + * RSCN here. These don't require a session. + * Even if we had a session, it might not be ready. + */ + if (fh->fh_type == FC_TYPE_ELS && fh->fh_r_ctl == FC_RCTL_ELS_REQ) { + /* + * Check opcode. + */ + recv = NULL; + switch (fc_frame_payload_op(fp)) { + case ELS_FLOGI: + recv = fc_lport_recv_flogi_req; + break; + case ELS_LOGO: + fh = fc_frame_header_get(fp); + if (ntoh24(fh->fh_s_id) == FC_FID_FLOGI) + recv = fc_lport_recv_logo_req; + break; + case ELS_RSCN: + recv = lport->tt.disc_recv_req; + break; + case ELS_ECHO: + recv = fc_lport_recv_echo_req; + break; + case ELS_RLIR: + recv = fc_lport_recv_rlir_req; + break; + case ELS_RNID: + recv = fc_lport_recv_rnid_req; + break; + case ELS_ADISC: + recv = fc_lport_recv_adisc_req; + break; + } + + if (recv) + recv(sp, fp, lport); + else { + /* + * Find session. + * If this is a new incoming PLOGI, we won't find it. + */ + s_id = ntoh24(fh->fh_s_id); + d_id = ntoh24(fh->fh_d_id); + + rport = lport->tt.rport_lookup(lport, s_id); + if (rport) + lport->tt.rport_recv_req(sp, fp, rport); + else { + rjt_data.fp = NULL; + rjt_data.reason = ELS_RJT_UNAB; + rjt_data.explan = ELS_EXPL_NONE; + lport->tt.seq_els_rsp_send(sp, + ELS_LS_RJT, + &rjt_data); + fc_frame_free(fp); + } + } + } else { + FC_DBG("dropping invalid frame (eof %x)\n", fr_eof(fp)); + fc_frame_free(fp); + } + mutex_unlock(&lport->lp_mutex); + + /* + * The common exch_done for all request may not be good + * if any request requires longer hold on exhange. XXX + */ + lport->tt.exch_done(sp); +} + +/** + * fc_lport_reset - Reset an lport + * @lport: The lport which should be reset + * + * Locking Note: This functions should not be called with the + * lport lock held. + */ +int fc_lport_reset(struct fc_lport *lport) +{ + mutex_lock(&lport->lp_mutex); + fc_lport_enter_reset(lport); + mutex_unlock(&lport->lp_mutex); + return 0; +} +EXPORT_SYMBOL(fc_lport_reset); + +/** + * fc_rport_enter_reset - Reset the local port + * @lport: Fibre Channel local port to be reset + * + * Locking Note: The lport lock is expected to be held before calling + * this routine. + */ +static void fc_lport_enter_reset(struct fc_lport *lport) +{ + FC_DEBUG_LPORT("Port (%6x) entered RESET state from %s state\n", + fc_host_port_id(lport->host), fc_lport_state(lport)); + + fc_lport_state_enter(lport, LPORT_ST_RESET); + + if (lport->dns_rp) + lport->tt.rport_logoff(lport->dns_rp); + + if (lport->ptp_rp) { + lport->tt.rport_logoff(lport->ptp_rp); + lport->ptp_rp = NULL; + } + + lport->tt.disc_stop(lport); + + lport->tt.exch_mgr_reset(lport->emp, 0, 0); + fc_host_fabric_name(lport->host) = 0; + fc_host_port_id(lport->host) = 0; + + if ((lport->link_status & FC_LINK_UP) == FC_LINK_UP) + fc_lport_enter_flogi(lport); +} + +/** + * fc_lport_error - Handler for any errors + * @lport: The fc_lport object + * @fp: The frame pointer + * + * If the error was caused by a resource allocation failure + * then wait for half a second and retry, otherwise retry + * after the e_d_tov time. + */ +static void fc_lport_error(struct fc_lport *lport, struct fc_frame *fp) +{ + unsigned long delay = 0; + FC_DEBUG_LPORT("Error %ld in state %s, retries %d\n", + PTR_ERR(fp), fc_lport_state(lport), + lport->retry_count); + + if (!fp || PTR_ERR(fp) == -FC_EX_TIMEOUT) { + /* + * Memory allocation failure, or the exchange timed out. + * Retry after delay + */ + if (lport->retry_count < lport->max_retry_count) { + lport->retry_count++; + if (!fp) + delay = msecs_to_jiffies(500); + else + delay = msecs_to_jiffies(lport->e_d_tov); + + schedule_delayed_work(&lport->retry_work, delay); + } else { + switch (lport->state) { + case LPORT_ST_NONE: + case LPORT_ST_READY: + case LPORT_ST_RESET: + case LPORT_ST_RPN_ID: + case LPORT_ST_RFT_ID: + case LPORT_ST_SCR: + case LPORT_ST_DNS: + case LPORT_ST_FLOGI: + case LPORT_ST_LOGO: + fc_lport_enter_reset(lport); + break; + } + } + } +} + +/** + * fc_lport_rft_id_resp - Handle response to Register Fibre + * Channel Types by ID (RPN_ID) request + * @sp: current sequence in RPN_ID exchange + * @fp: response frame + * @lp_arg: Fibre Channel host port instance + * + * Locking Note: This function will be called without the lport lock + * held, but it will lock, call an _enter_* function or fc_lport_error + * and then unlock the lport. + */ +static void fc_lport_rft_id_resp(struct fc_seq *sp, struct fc_frame *fp, + void *lp_arg) +{ + struct fc_lport *lport = lp_arg; + struct fc_frame_header *fh; + struct fc_ct_hdr *ct; + + if (fp == ERR_PTR(-FC_EX_CLOSED)) + return; + + mutex_lock(&lport->lp_mutex); + + FC_DEBUG_LPORT("Received a RFT_ID response\n"); + + if (lport->state != LPORT_ST_RFT_ID) { + FC_DBG("Received a RFT_ID response, but in state %s\n", + fc_lport_state(lport)); + goto out; + } + + if (IS_ERR(fp)) { + fc_lport_error(lport, fp); + goto err; + } + + fh = fc_frame_header_get(fp); + ct = fc_frame_payload_get(fp, sizeof(*ct)); + + if (fh && ct && fh->fh_type == FC_TYPE_CT && + ct->ct_fs_type == FC_FST_DIR && + ct->ct_fs_subtype == FC_NS_SUBTYPE && + ntohs(ct->ct_cmd) == FC_FS_ACC) + fc_lport_enter_scr(lport); + else + fc_lport_error(lport, fp); +out: + fc_frame_free(fp); +err: + mutex_unlock(&lport->lp_mutex); +} + +/** + * fc_lport_rpn_id_resp - Handle response to Register Port + * Name by ID (RPN_ID) request + * @sp: current sequence in RPN_ID exchange + * @fp: response frame + * @lp_arg: Fibre Channel host port instance + * + * Locking Note: This function will be called without the lport lock + * held, but it will lock, call an _enter_* function or fc_lport_error + * and then unlock the lport. + */ +static void fc_lport_rpn_id_resp(struct fc_seq *sp, struct fc_frame *fp, + void *lp_arg) +{ + struct fc_lport *lport = lp_arg; + struct fc_frame_header *fh; + struct fc_ct_hdr *ct; + + if (fp == ERR_PTR(-FC_EX_CLOSED)) + return; + + mutex_lock(&lport->lp_mutex); + + FC_DEBUG_LPORT("Received a RPN_ID response\n"); + + if (lport->state != LPORT_ST_RPN_ID) { + FC_DBG("Received a RPN_ID response, but in state %s\n", + fc_lport_state(lport)); + goto out; + } + + if (IS_ERR(fp)) { + fc_lport_error(lport, fp); + goto err; + } + + fh = fc_frame_header_get(fp); + ct = fc_frame_payload_get(fp, sizeof(*ct)); + if (fh && ct && fh->fh_type == FC_TYPE_CT && + ct->ct_fs_type == FC_FST_DIR && + ct->ct_fs_subtype == FC_NS_SUBTYPE && + ntohs(ct->ct_cmd) == FC_FS_ACC) + fc_lport_enter_rft_id(lport); + else + fc_lport_error(lport, fp); + +out: + fc_frame_free(fp); +err: + mutex_unlock(&lport->lp_mutex); +} + +/** + * fc_lport_scr_resp - Handle response to State Change Register (SCR) request + * @sp: current sequence in SCR exchange + * @fp: response frame + * @lp_arg: Fibre Channel lport port instance that sent the registration request + * + * Locking Note: This function will be called without the lport lock + * held, but it will lock, call an _enter_* function or fc_lport_error + * and then unlock the lport. + */ +static void fc_lport_scr_resp(struct fc_seq *sp, struct fc_frame *fp, + void *lp_arg) +{ + struct fc_lport *lport = lp_arg; + u8 op; + + if (fp == ERR_PTR(-FC_EX_CLOSED)) + return; + + mutex_lock(&lport->lp_mutex); + + FC_DEBUG_LPORT("Received a SCR response\n"); + + if (lport->state != LPORT_ST_SCR) { + FC_DBG("Received a SCR response, but in state %s\n", + fc_lport_state(lport)); + goto out; + } + + if (IS_ERR(fp)) { + fc_lport_error(lport, fp); + goto err; + } + + op = fc_frame_payload_op(fp); + if (op == ELS_LS_ACC) + fc_lport_enter_ready(lport); + else + fc_lport_error(lport, fp); + +out: + fc_frame_free(fp); +err: + mutex_unlock(&lport->lp_mutex); +} + +/** + * fc_lport_enter_scr - Send a State Change Register (SCR) request + * @lport: Fibre Channel local port to register for state changes + * + * Locking Note: The lport lock is expected to be held before calling + * this routine. + */ +static void fc_lport_enter_scr(struct fc_lport *lport) +{ + struct fc_frame *fp; + + FC_DEBUG_LPORT("Port (%6x) entered SCR state from %s state\n", + fc_host_port_id(lport->host), fc_lport_state(lport)); + + fc_lport_state_enter(lport, LPORT_ST_SCR); + + fp = fc_frame_alloc(lport, sizeof(struct fc_els_scr)); + if (!fp) { + fc_lport_error(lport, fp); + return; + } + + if (!lport->tt.elsct_send(lport, NULL, fp, ELS_SCR, + fc_lport_scr_resp, lport, lport->e_d_tov)) + fc_lport_error(lport, fp); +} + +/** + * fc_lport_enter_rft_id - Register FC4-types with the name server + * @lport: Fibre Channel local port to register + * + * Locking Note: The lport lock is expected to be held before calling + * this routine. + */ +static void fc_lport_enter_rft_id(struct fc_lport *lport) +{ + struct fc_frame *fp; + struct fc_ns_fts *lps; + int i; + + FC_DEBUG_LPORT("Port (%6x) entered RFT_ID state from %s state\n", + fc_host_port_id(lport->host), fc_lport_state(lport)); + + fc_lport_state_enter(lport, LPORT_ST_RFT_ID); + + lps = &lport->fcts; + i = sizeof(lps->ff_type_map) / sizeof(lps->ff_type_map[0]); + while (--i >= 0) + if (ntohl(lps->ff_type_map[i]) != 0) + break; + if (i < 0) { + /* nothing to register, move on to SCR */ + fc_lport_enter_scr(lport); + return; + } + + fp = fc_frame_alloc(lport, sizeof(struct fc_ct_hdr) + + sizeof(struct fc_ns_rft)); + if (!fp) { + fc_lport_error(lport, fp); + return; + } + + if (!lport->tt.elsct_send(lport, NULL, fp, FC_NS_RFT_ID, + fc_lport_rft_id_resp, + lport, lport->e_d_tov)) + fc_lport_error(lport, fp); +} + +/** + * fc_rport_enter_rft_id - Register port name with the name server + * @lport: Fibre Channel local port to register + * + * Locking Note: The lport lock is expected to be held before calling + * this routine. + */ +static void fc_lport_enter_rpn_id(struct fc_lport *lport) +{ + struct fc_frame *fp; + + FC_DEBUG_LPORT("Port (%6x) entered RPN_ID state from %s state\n", + fc_host_port_id(lport->host), fc_lport_state(lport)); + + fc_lport_state_enter(lport, LPORT_ST_RPN_ID); + + fp = fc_frame_alloc(lport, sizeof(struct fc_ct_hdr) + + sizeof(struct fc_ns_rn_id)); + if (!fp) { + fc_lport_error(lport, fp); + return; + } + + if (!lport->tt.elsct_send(lport, NULL, fp, FC_NS_RPN_ID, + fc_lport_rpn_id_resp, + lport, lport->e_d_tov)) + fc_lport_error(lport, fp); +} + +static struct fc_rport_operations fc_lport_rport_ops = { + .event_callback = fc_lport_rport_callback, +}; + +/** + * fc_rport_enter_dns - Create a rport to the name server + * @lport: Fibre Channel local port requesting a rport for the name server + * + * Locking Note: The lport lock is expected to be held before calling + * this routine. + */ +static void fc_lport_enter_dns(struct fc_lport *lport) +{ + struct fc_rport *rport; + struct fc_rport_libfc_priv *rdata; + struct fc_disc_port dp; + + dp.ids.port_id = FC_FID_DIR_SERV; + dp.ids.port_name = -1; + dp.ids.node_name = -1; + dp.ids.roles = FC_RPORT_ROLE_UNKNOWN; + dp.lp = lport; + + FC_DEBUG_LPORT("Port (%6x) entered DNS state from %s state\n", + fc_host_port_id(lport->host), fc_lport_state(lport)); + + fc_lport_state_enter(lport, LPORT_ST_DNS); + + rport = fc_rport_rogue_create(&dp); + if (!rport) + goto err; + + rdata = rport->dd_data; + rdata->ops = &fc_lport_rport_ops; + lport->tt.rport_login(rport); + return; + +err: + fc_lport_error(lport, NULL); +} + +/** + * fc_lport_timeout - Handler for the retry_work timer. + * @work: The work struct of the fc_lport + */ +static void fc_lport_timeout(struct work_struct *work) +{ + struct fc_lport *lport = + container_of(work, struct fc_lport, + retry_work.work); + + mutex_lock(&lport->lp_mutex); + + switch (lport->state) { + case LPORT_ST_NONE: + case LPORT_ST_READY: + case LPORT_ST_RESET: + WARN_ON(1); + break; + case LPORT_ST_FLOGI: + fc_lport_enter_flogi(lport); + break; + case LPORT_ST_DNS: + fc_lport_enter_dns(lport); + break; + case LPORT_ST_RPN_ID: + fc_lport_enter_rpn_id(lport); + break; + case LPORT_ST_RFT_ID: + fc_lport_enter_rft_id(lport); + break; + case LPORT_ST_SCR: + fc_lport_enter_scr(lport); + break; + case LPORT_ST_LOGO: + fc_lport_enter_logo(lport); + break; + } + + mutex_unlock(&lport->lp_mutex); +} + +/** + * fc_lport_logo_resp - Handle response to LOGO request + * @sp: current sequence in LOGO exchange + * @fp: response frame + * @lp_arg: Fibre Channel lport port instance that sent the LOGO request + * + * Locking Note: This function will be called without the lport lock + * held, but it will lock, call an _enter_* function or fc_lport_error + * and then unlock the lport. + */ +static void fc_lport_logo_resp(struct fc_seq *sp, struct fc_frame *fp, + void *lp_arg) +{ + struct fc_lport *lport = lp_arg; + u8 op; + + if (fp == ERR_PTR(-FC_EX_CLOSED)) + return; + + mutex_lock(&lport->lp_mutex); + + FC_DEBUG_LPORT("Received a LOGO response\n"); + + if (lport->state != LPORT_ST_LOGO) { + FC_DBG("Received a LOGO response, but in state %s\n", + fc_lport_state(lport)); + goto out; + } + + if (IS_ERR(fp)) { + fc_lport_error(lport, fp); + goto err; + } + + op = fc_frame_payload_op(fp); + if (op == ELS_LS_ACC) + fc_lport_enter_reset(lport); + else + fc_lport_error(lport, fp); + +out: + fc_frame_free(fp); +err: + mutex_unlock(&lport->lp_mutex); +} + +/** + * fc_rport_enter_logo - Logout of the fabric + * @lport: Fibre Channel local port to be logged out + * + * Locking Note: The lport lock is expected to be held before calling + * this routine. + */ +static void fc_lport_enter_logo(struct fc_lport *lport) +{ + struct fc_frame *fp; + struct fc_els_logo *logo; + + FC_DEBUG_LPORT("Port (%6x) entered LOGO state from %s state\n", + fc_host_port_id(lport->host), fc_lport_state(lport)); + + fc_lport_state_enter(lport, LPORT_ST_LOGO); + + /* DNS session should be closed so we can release it here */ + if (lport->dns_rp) + lport->tt.rport_logoff(lport->dns_rp); + + fp = fc_frame_alloc(lport, sizeof(*logo)); + if (!fp) { + fc_lport_error(lport, fp); + return; + } + + if (!lport->tt.elsct_send(lport, NULL, fp, ELS_LOGO, fc_lport_logo_resp, + lport, lport->e_d_tov)) + fc_lport_error(lport, fp); +} + +/** + * fc_lport_flogi_resp - Handle response to FLOGI request + * @sp: current sequence in FLOGI exchange + * @fp: response frame + * @lp_arg: Fibre Channel lport port instance that sent the FLOGI request + * + * Locking Note: This function will be called without the lport lock + * held, but it will lock, call an _enter_* function or fc_lport_error + * and then unlock the lport. + */ +static void fc_lport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp, + void *lp_arg) +{ + struct fc_lport *lport = lp_arg; + struct fc_frame_header *fh; + struct fc_els_flogi *flp; + u32 did; + u16 csp_flags; + unsigned int r_a_tov; + unsigned int e_d_tov; + u16 mfs; + + if (fp == ERR_PTR(-FC_EX_CLOSED)) + return; + + mutex_lock(&lport->lp_mutex); + + FC_DEBUG_LPORT("Received a FLOGI response\n"); + + if (lport->state != LPORT_ST_FLOGI) { + FC_DBG("Received a FLOGI response, but in state %s\n", + fc_lport_state(lport)); + goto out; + } + + if (IS_ERR(fp)) { + fc_lport_error(lport, fp); + goto err; + } + + fh = fc_frame_header_get(fp); + did = ntoh24(fh->fh_d_id); + if (fc_frame_payload_op(fp) == ELS_LS_ACC && did != 0) { + + FC_DEBUG_LPORT("Assigned fid %x\n", did); + fc_host_port_id(lport->host) = did; + + flp = fc_frame_payload_get(fp, sizeof(*flp)); + if (flp) { + mfs = ntohs(flp->fl_csp.sp_bb_data) & + FC_SP_BB_DATA_MASK; + if (mfs >= FC_SP_MIN_MAX_PAYLOAD && + mfs < lport->mfs) + lport->mfs = mfs; + csp_flags = ntohs(flp->fl_csp.sp_features); + r_a_tov = ntohl(flp->fl_csp.sp_r_a_tov); + e_d_tov = ntohl(flp->fl_csp.sp_e_d_tov); + if (csp_flags & FC_SP_FT_EDTR) + e_d_tov /= 1000000; + if ((csp_flags & FC_SP_FT_FPORT) == 0) { + if (e_d_tov > lport->e_d_tov) + lport->e_d_tov = e_d_tov; + lport->r_a_tov = 2 * e_d_tov; + FC_DBG("Point-to-Point mode\n"); + fc_lport_ptp_setup(lport, ntoh24(fh->fh_s_id), + get_unaligned_be64( + &flp->fl_wwpn), + get_unaligned_be64( + &flp->fl_wwnn)); + } else { + lport->e_d_tov = e_d_tov; + lport->r_a_tov = r_a_tov; + fc_host_fabric_name(lport->host) = + get_unaligned_be64(&flp->fl_wwnn); + fc_lport_enter_dns(lport); + } + } + + if (flp) { + csp_flags = ntohs(flp->fl_csp.sp_features); + if ((csp_flags & FC_SP_FT_FPORT) == 0) { + lport->tt.disc_start(fc_lport_disc_callback, + lport); + } + } + } else { + FC_DBG("bad FLOGI response\n"); + } + +out: + fc_frame_free(fp); +err: + mutex_unlock(&lport->lp_mutex); +} + +/** + * fc_rport_enter_flogi - Send a FLOGI request to the fabric manager + * @lport: Fibre Channel local port to be logged in to the fabric + * + * Locking Note: The lport lock is expected to be held before calling + * this routine. + */ +void fc_lport_enter_flogi(struct fc_lport *lport) +{ + struct fc_frame *fp; + + FC_DEBUG_LPORT("Processing FLOGI state\n"); + + fc_lport_state_enter(lport, LPORT_ST_FLOGI); + + fp = fc_frame_alloc(lport, sizeof(struct fc_els_flogi)); + if (!fp) + return fc_lport_error(lport, fp); + + if (!lport->tt.elsct_send(lport, NULL, fp, ELS_FLOGI, + fc_lport_flogi_resp, lport, lport->e_d_tov)) + fc_lport_error(lport, fp); +} + +/* Configure a fc_lport */ +int fc_lport_config(struct fc_lport *lport) +{ + INIT_DELAYED_WORK(&lport->retry_work, fc_lport_timeout); + mutex_init(&lport->lp_mutex); + + fc_lport_state_enter(lport, LPORT_ST_NONE); + + fc_lport_add_fc4_type(lport, FC_TYPE_FCP); + fc_lport_add_fc4_type(lport, FC_TYPE_CT); + + return 0; +} +EXPORT_SYMBOL(fc_lport_config); + +int fc_lport_init(struct fc_lport *lport) +{ + if (!lport->tt.lport_recv) + lport->tt.lport_recv = fc_lport_recv_req; + + if (!lport->tt.lport_reset) + lport->tt.lport_reset = fc_lport_reset; + + fc_host_port_type(lport->host) = FC_PORTTYPE_NPORT; + fc_host_node_name(lport->host) = lport->wwnn; + fc_host_port_name(lport->host) = lport->wwpn; + fc_host_supported_classes(lport->host) = FC_COS_CLASS3; + memset(fc_host_supported_fc4s(lport->host), 0, + sizeof(fc_host_supported_fc4s(lport->host))); + fc_host_supported_fc4s(lport->host)[2] = 1; + fc_host_supported_fc4s(lport->host)[7] = 1; + + /* This value is also unchanging */ + memset(fc_host_active_fc4s(lport->host), 0, + sizeof(fc_host_active_fc4s(lport->host))); + fc_host_active_fc4s(lport->host)[2] = 1; + fc_host_active_fc4s(lport->host)[7] = 1; + fc_host_maxframe_size(lport->host) = lport->mfs; + fc_host_supported_speeds(lport->host) = 0; + if (lport->link_supported_speeds & FC_PORTSPEED_1GBIT) + fc_host_supported_speeds(lport->host) |= FC_PORTSPEED_1GBIT; + if (lport->link_supported_speeds & FC_PORTSPEED_10GBIT) + fc_host_supported_speeds(lport->host) |= FC_PORTSPEED_10GBIT; + + return 0; +} +EXPORT_SYMBOL(fc_lport_init); diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c new file mode 100644 index 0000000..e780d8c --- /dev/null +++ b/drivers/scsi/libfc/fc_rport.c @@ -0,0 +1,1291 @@ +/* + * Copyright(c) 2007 - 2008 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Maintained at www.Open-FCoE.org + */ + +/* + * RPORT GENERAL INFO + * + * This file contains all processing regarding fc_rports. It contains the + * rport state machine and does all rport interaction with the transport class. + * There should be no other places in libfc that interact directly with the + * transport class in regards to adding and deleting rports. + * + * fc_rport's represent N_Port's within the fabric. + */ + +/* + * RPORT LOCKING + * + * The rport should never hold the rport mutex and then attempt to acquire + * either the lport or disc mutexes. The rport's mutex is considered lesser + * than both the lport's mutex and the disc mutex. Refer to fc_lport.c for + * more comments on the heirarchy. + * + * The locking strategy is similar to the lport's strategy. The lock protects + * the rport's states and is held and released by the entry points to the rport + * block. All _enter_* functions correspond to rport states and expect the rport + * mutex to be locked before calling them. This means that rports only handle + * one request or response at a time, since they're not critical for the I/O + * path this potential over-use of the mutex is acceptable. + */ + +#include <linux/kernel.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/rcupdate.h> +#include <linux/timer.h> +#include <linux/workqueue.h> +#include <asm/unaligned.h> + +#include <scsi/libfc.h> +#include <scsi/fc_encode.h> + +static int fc_rport_debug; + +#define FC_DEBUG_RPORT(fmt...) \ + do { \ + if (fc_rport_debug) \ + FC_DBG(fmt); \ + } while (0) + +struct workqueue_struct *rport_event_queue; + +static void fc_rport_enter_plogi(struct fc_rport *); +static void fc_rport_enter_prli(struct fc_rport *); +static void fc_rport_enter_rtv(struct fc_rport *); +static void fc_rport_enter_ready(struct fc_rport *); +static void fc_rport_enter_logo(struct fc_rport *); + +static void fc_rport_recv_plogi_req(struct fc_rport *, + struct fc_seq *, struct fc_frame *); +static void fc_rport_recv_prli_req(struct fc_rport *, + struct fc_seq *, struct fc_frame *); +static void fc_rport_recv_prlo_req(struct fc_rport *, + struct fc_seq *, struct fc_frame *); +static void fc_rport_recv_logo_req(struct fc_rport *, + struct fc_seq *, struct fc_frame *); +static void fc_rport_timeout(struct work_struct *); +static void fc_rport_error(struct fc_rport *, struct fc_frame *); +static void fc_rport_work(struct work_struct *); + +static const char *fc_rport_state_names[] = { + [RPORT_ST_NONE] = "None", + [RPORT_ST_INIT] = "Init", + [RPORT_ST_PLOGI] = "PLOGI", + [RPORT_ST_PRLI] = "PRLI", + [RPORT_ST_RTV] = "RTV", + [RPORT_ST_READY] = "Ready", + [RPORT_ST_LOGO] = "LOGO", +}; + +static void fc_rport_rogue_destroy(struct device *dev) +{ + struct fc_rport *rport = dev_to_rport(dev); + FC_DEBUG_RPORT("Destroying rogue rport (%6x)\n", rport->port_id); + kfree(rport); +} + +struct fc_rport *fc_rport_rogue_create(struct fc_disc_port *dp) +{ + struct fc_rport *rport; + struct fc_rport_libfc_priv *rdata; + rport = kzalloc(sizeof(*rport) + sizeof(*rdata), GFP_KERNEL); + + if (!rport) + return NULL; + + rdata = RPORT_TO_PRIV(rport); + + rport->dd_data = rdata; + rport->port_id = dp->ids.port_id; + rport->port_name = dp->ids.port_name; + rport->node_name = dp->ids.node_name; + rport->roles = dp->ids.roles; + rport->maxframe_size = FC_MIN_MAX_PAYLOAD; + /* + * Note: all this libfc rogue rport code will be removed for + * upstream so it fine that this is really ugly and hacky right now. + */ + device_initialize(&rport->dev); + rport->dev.release = fc_rport_rogue_destroy; + + mutex_init(&rdata->rp_mutex); + rdata->local_port = dp->lp; + rdata->trans_state = FC_PORTSTATE_ROGUE; + rdata->rp_state = RPORT_ST_INIT; + rdata->event = RPORT_EV_NONE; + rdata->flags = FC_RP_FLAGS_REC_SUPPORTED; + rdata->ops = NULL; + rdata->e_d_tov = dp->lp->e_d_tov; + rdata->r_a_tov = dp->lp->r_a_tov; + INIT_DELAYED_WORK(&rdata->retry_work, fc_rport_timeout); + INIT_WORK(&rdata->event_work, fc_rport_work); + /* + * For good measure, but not necessary as we should only + * add REAL rport to the lport list. + */ + INIT_LIST_HEAD(&rdata->peers); + + return rport; +} + +/** + * fc_rport_state - return a string for the state the rport is in + * @rport: The rport whose state we want to get a string for + */ +static const char *fc_rport_state(struct fc_rport *rport) +{ + const char *cp; + struct fc_rport_libfc_priv *rdata = rport->dd_data; + + cp = fc_rport_state_names[rdata->rp_state]; + if (!cp) + cp = "Unknown"; + return cp; +} + +/** + * fc_set_rport_loss_tmo - Set the remote port loss timeout in seconds. + * @rport: Pointer to Fibre Channel remote port structure + * @timeout: timeout in seconds + */ +void fc_set_rport_loss_tmo(struct fc_rport *rport, u32 timeout) +{ + if (timeout) + rport->dev_loss_tmo = timeout + 5; + else + rport->dev_loss_tmo = 30; +} +EXPORT_SYMBOL(fc_set_rport_loss_tmo); + +/** + * fc_plogi_get_maxframe - Get max payload from the common service parameters + * @flp: FLOGI payload structure + * @maxval: upper limit, may be less than what is in the service parameters + */ +static unsigned int +fc_plogi_get_maxframe(struct fc_els_flogi *flp, unsigned int maxval) +{ + unsigned int mfs; + + /* + * Get max payload from the common service parameters and the + * class 3 receive data field size. + */ + mfs = ntohs(flp->fl_csp.sp_bb_data) & FC_SP_BB_DATA_MASK; + if (mfs >= FC_SP_MIN_MAX_PAYLOAD && mfs < maxval) + maxval = mfs; + mfs = ntohs(flp->fl_cssp[3 - 1].cp_rdfs); + if (mfs >= FC_SP_MIN_MAX_PAYLOAD && mfs < maxval) + maxval = mfs; + return maxval; +} + +/** + * fc_rport_state_enter - Change the rport's state + * @rport: The rport whose state should change + * @new: The new state of the rport + * + * Locking Note: Called with the rport lock held + */ +static void fc_rport_state_enter(struct fc_rport *rport, + enum fc_rport_state new) +{ + struct fc_rport_libfc_priv *rdata = rport->dd_data; + if (rdata->rp_state != new) + rdata->retries = 0; + rdata->rp_state = new; +} + +static void fc_rport_work(struct work_struct *work) +{ + struct fc_rport_libfc_priv *rdata = + container_of(work, struct fc_rport_libfc_priv, event_work); + enum fc_rport_event event; + enum fc_rport_trans_state trans_state; + struct fc_lport *lport = rdata->local_port; + struct fc_rport_operations *rport_ops; + struct fc_rport *rport = PRIV_TO_RPORT(rdata); + + mutex_lock(&rdata->rp_mutex); + event = rdata->event; + rport_ops = rdata->ops; + + if (event == RPORT_EV_CREATED) { + struct fc_rport *new_rport; + struct fc_rport_libfc_priv *new_rdata; + struct fc_rport_identifiers ids; + + ids.port_id = rport->port_id; + ids.roles = rport->roles; + ids.port_name = rport->port_name; + ids.node_name = rport->node_name; + + mutex_unlock(&rdata->rp_mutex); + + new_rport = fc_remote_port_add(lport->host, 0, &ids); + if (new_rport) { + /* + * Switch from the rogue rport to the rport + * returned by the FC class. + */ + new_rport->maxframe_size = rport->maxframe_size; + + new_rdata = new_rport->dd_data; + new_rdata->e_d_tov = rdata->e_d_tov; + new_rdata->r_a_tov = rdata->r_a_tov; + new_rdata->ops = rdata->ops; + new_rdata->local_port = rdata->local_port; + new_rdata->flags = FC_RP_FLAGS_REC_SUPPORTED; + new_rdata->trans_state = FC_PORTSTATE_REAL; + mutex_init(&new_rdata->rp_mutex); + INIT_DELAYED_WORK(&new_rdata->retry_work, + fc_rport_timeout); + INIT_LIST_HEAD(&new_rdata->peers); + INIT_WORK(&new_rdata->event_work, fc_rport_work); + + fc_rport_state_enter(new_rport, RPORT_ST_READY); + } else { + FC_DBG("Failed to create the rport for port " + "(%6x).\n", ids.port_id); + event = RPORT_EV_FAILED; + } + put_device(&rport->dev); + rport = new_rport; + rdata = new_rport->dd_data; + if (rport_ops->event_callback) + rport_ops->event_callback(lport, rport, event); + } else if ((event == RPORT_EV_FAILED) || + (event == RPORT_EV_LOGO) || + (event == RPORT_EV_STOP)) { + trans_state = rdata->trans_state; + mutex_unlock(&rdata->rp_mutex); + if (rport_ops->event_callback) + rport_ops->event_callback(lport, rport, event); + if (trans_state == FC_PORTSTATE_ROGUE) + put_device(&rport->dev); + else + fc_remote_port_delete(rport); + } else + mutex_unlock(&rdata->rp_mutex); +} + +/** + * fc_rport_login - Start the remote port login state machine + * @rport: Fibre Channel remote port + * + * Locking Note: Called without the rport lock held. This + * function will hold the rport lock, call an _enter_* + * function and then unlock the rport. + */ +int fc_rport_login(struct fc_rport *rport) +{ + struct fc_rport_libfc_priv *rdata = rport->dd_data; + + mutex_lock(&rdata->rp_mutex); + + FC_DEBUG_RPORT("Login to port (%6x)\n", rport->port_id); + + fc_rport_enter_plogi(rport); + + mutex_unlock(&rdata->rp_mutex); + + return 0; +} + +/** + * fc_rport_logoff - Logoff and remove an rport + * @rport: Fibre Channel remote port to be removed + * + * Locking Note: Called without the rport lock held. This + * function will hold the rport lock, call an _enter_* + * function and then unlock the rport. + */ +int fc_rport_logoff(struct fc_rport *rport) +{ + struct fc_rport_libfc_priv *rdata = rport->dd_data; + + mutex_lock(&rdata->rp_mutex); + + FC_DEBUG_RPORT("Remove port (%6x)\n", rport->port_id); + + fc_rport_enter_logo(rport); + + /* + * Change the state to NONE so that we discard + * the response. + */ + fc_rport_state_enter(rport, RPORT_ST_NONE); + + mutex_unlock(&rdata->rp_mutex); + + cancel_delayed_work_sync(&rdata->retry_work); + + mutex_lock(&rdata->rp_mutex); + + rdata->event = RPORT_EV_STOP; + queue_work(rport_event_queue, &rdata->event_work); + + mutex_unlock(&rdata->rp_mutex); + + return 0; +} + +/** + * fc_rport_enter_ready - The rport is ready + * @rport: Fibre Channel remote port that is ready + * + * Locking Note: The rport lock is expected to be held before calling + * this routine. + */ +static void fc_rport_enter_ready(struct fc_rport *rport) +{ + struct fc_rport_libfc_priv *rdata = rport->dd_data; + + fc_rport_state_enter(rport, RPORT_ST_READY); + + FC_DEBUG_RPORT("Port (%6x) is Ready\n", rport->port_id); + + rdata->event = RPORT_EV_CREATED; + queue_work(rport_event_queue, &rdata->event_work); +} + +/** + * fc_rport_timeout - Handler for the retry_work timer. + * @work: The work struct of the fc_rport_libfc_priv + * + * Locking Note: Called without the rport lock held. This + * function will hold the rport lock, call an _enter_* + * function and then unlock the rport. + */ +static void fc_rport_timeout(struct work_struct *work) +{ + struct fc_rport_libfc_priv *rdata = + container_of(work, struct fc_rport_libfc_priv, retry_work.work); + struct fc_rport *rport = PRIV_TO_RPORT(rdata); + + mutex_lock(&rdata->rp_mutex); + + switch (rdata->rp_state) { + case RPORT_ST_PLOGI: + fc_rport_enter_plogi(rport); + break; + case RPORT_ST_PRLI: + fc_rport_enter_prli(rport); + break; + case RPORT_ST_RTV: + fc_rport_enter_rtv(rport); + break; + case RPORT_ST_LOGO: + fc_rport_enter_logo(rport); + break; + case RPORT_ST_READY: + case RPORT_ST_INIT: + case RPORT_ST_NONE: + break; + } + + mutex_unlock(&rdata->rp_mutex); + put_device(&rport->dev); +} + +/** + * fc_rport_error - Handler for any errors + * @rport: The fc_rport object + * @fp: The frame pointer + * + * If the error was caused by a resource allocation failure + * then wait for half a second and retry, otherwise retry + * immediately. + * + * Locking Note: The rport lock is expected to be held before + * calling this routine + */ +static void fc_rport_error(struct fc_rport *rport, struct fc_frame *fp) +{ + struct fc_rport_libfc_priv *rdata = rport->dd_data; + unsigned long delay = 0; + + FC_DEBUG_RPORT("Error %ld in state %s, retries %d\n", + PTR_ERR(fp), fc_rport_state(rport), rdata->retries); + + if (!fp || PTR_ERR(fp) == -FC_EX_TIMEOUT) { + /* + * Memory allocation failure, or the exchange timed out. + * Retry after delay + */ + if (rdata->retries < rdata->local_port->max_retry_count) { + rdata->retries++; + if (!fp) + delay = msecs_to_jiffies(500); + get_device(&rport->dev); + schedule_delayed_work(&rdata->retry_work, delay); + } else { + switch (rdata->rp_state) { + case RPORT_ST_PLOGI: + case RPORT_ST_PRLI: + case RPORT_ST_LOGO: + rdata->event = RPORT_EV_FAILED; + queue_work(rport_event_queue, + &rdata->event_work); + break; + case RPORT_ST_RTV: + fc_rport_enter_ready(rport); + break; + case RPORT_ST_NONE: + case RPORT_ST_READY: + case RPORT_ST_INIT: + break; + } + } + } +} + +/** + * fc_rport_plogi_recv_resp - Handle incoming ELS PLOGI response + * @sp: current sequence in the PLOGI exchange + * @fp: response frame + * @rp_arg: Fibre Channel remote port + * + * Locking Note: This function will be called without the rport lock + * held, but it will lock, call an _enter_* function or fc_rport_error + * and then unlock the rport. + */ +static void fc_rport_plogi_resp(struct fc_seq *sp, struct fc_frame *fp, + void *rp_arg) +{ + struct fc_rport *rport = rp_arg; + struct fc_rport_libfc_priv *rdata = rport->dd_data; + struct fc_lport *lport = rdata->local_port; + struct fc_els_flogi *plp; + unsigned int tov; + u16 csp_seq; + u16 cssp_seq; + u8 op; + + mutex_lock(&rdata->rp_mutex); + + FC_DEBUG_RPORT("Received a PLOGI response from port (%6x)\n", + rport->port_id); + + if (rdata->rp_state != RPORT_ST_PLOGI) { + FC_DBG("Received a PLOGI response, but in state %s\n", + fc_rport_state(rport)); + goto out; + } + + if (IS_ERR(fp)) { + fc_rport_error(rport, fp); + goto err; + } + + op = fc_frame_payload_op(fp); + if (op == ELS_LS_ACC && + (plp = fc_frame_payload_get(fp, sizeof(*plp))) != NULL) { + rport->port_name = get_unaligned_be64(&plp->fl_wwpn); + rport->node_name = get_unaligned_be64(&plp->fl_wwnn); + + tov = ntohl(plp->fl_csp.sp_e_d_tov); + if (ntohs(plp->fl_csp.sp_features) & FC_SP_FT_EDTR) + tov /= 1000; + if (tov > rdata->e_d_tov) + rdata->e_d_tov = tov; + csp_seq = ntohs(plp->fl_csp.sp_tot_seq); + cssp_seq = ntohs(plp->fl_cssp[3 - 1].cp_con_seq); + if (cssp_seq < csp_seq) + csp_seq = cssp_seq; + rdata->max_seq = csp_seq; + rport->maxframe_size = + fc_plogi_get_maxframe(plp, lport->mfs); + + /* + * If the rport is one of the well known addresses + * we skip PRLI and RTV and go straight to READY. + */ + if (rport->port_id >= FC_FID_DOM_MGR) + fc_rport_enter_ready(rport); + else + fc_rport_enter_prli(rport); + } else + fc_rport_error(rport, fp); + +out: + fc_frame_free(fp); +err: + mutex_unlock(&rdata->rp_mutex); + put_device(&rport->dev); +} + +/** + * fc_rport_enter_plogi - Send Port Login (PLOGI) request to peer + * @rport: Fibre Channel remote port to send PLOGI to + * + * Locking Note: The rport lock is expected to be held before calling + * this routine. + */ +static void fc_rport_enter_plogi(struct fc_rport *rport) +{ + struct fc_rport_libfc_priv *rdata = rport->dd_data; + struct fc_lport *lport = rdata->local_port; + struct fc_frame *fp; + + FC_DEBUG_RPORT("Port (%6x) entered PLOGI state from %s state\n", + rport->port_id, fc_rport_state(rport)); + + fc_rport_state_enter(rport, RPORT_ST_PLOGI); + + rport->maxframe_size = FC_MIN_MAX_PAYLOAD; + fp = fc_frame_alloc(lport, sizeof(struct fc_els_flogi)); + if (!fp) { + fc_rport_error(rport, fp); + return; + } + rdata->e_d_tov = lport->e_d_tov; + + if (!lport->tt.elsct_send(lport, rport, fp, ELS_PLOGI, + fc_rport_plogi_resp, rport, lport->e_d_tov)) + fc_rport_error(rport, fp); + else + get_device(&rport->dev); +} + +/** + * fc_rport_prli_resp - Process Login (PRLI) response handler + * @sp: current sequence in the PRLI exchange + * @fp: response frame + * @rp_arg: Fibre Channel remote port + * + * Locking Note: This function will be called without the rport lock + * held, but it will lock, call an _enter_* function or fc_rport_error + * and then unlock the rport. + */ +static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp, + void *rp_arg) +{ + struct fc_rport *rport = rp_arg; + struct fc_rport_libfc_priv *rdata = rport->dd_data; + struct { + struct fc_els_prli prli; + struct fc_els_spp spp; + } *pp; + u32 roles = FC_RPORT_ROLE_UNKNOWN; + u32 fcp_parm = 0; + u8 op; + + mutex_lock(&rdata->rp_mutex); + + FC_DEBUG_RPORT("Received a PRLI response from port (%6x)\n", + rport->port_id); + + if (rdata->rp_state != RPORT_ST_PRLI) { + FC_DBG("Received a PRLI response, but in state %s\n", + fc_rport_state(rport)); + goto out; + } + + if (IS_ERR(fp)) { + fc_rport_error(rport, fp); + goto err; + } + + op = fc_frame_payload_op(fp); + if (op == ELS_LS_ACC) { + pp = fc_frame_payload_get(fp, sizeof(*pp)); + if (pp && pp->prli.prli_spp_len >= sizeof(pp->spp)) { + fcp_parm = ntohl(pp->spp.spp_params); + if (fcp_parm & FCP_SPPF_RETRY) + rdata->flags |= FC_RP_FLAGS_RETRY; + } + + rport->supported_classes = FC_COS_CLASS3; + if (fcp_parm & FCP_SPPF_INIT_FCN) + roles |= FC_RPORT_ROLE_FCP_INITIATOR; + if (fcp_parm & FCP_SPPF_TARG_FCN) + roles |= FC_RPORT_ROLE_FCP_TARGET; + + rport->roles = roles; + fc_rport_enter_rtv(rport); + + } else { + FC_DBG("Bad ELS response\n"); + rdata->event = RPORT_EV_FAILED; + queue_work(rport_event_queue, &rdata->event_work); + } + +out: + fc_frame_free(fp); +err: + mutex_unlock(&rdata->rp_mutex); + put_device(&rport->dev); +} + +/** + * fc_rport_logo_resp - Logout (LOGO) response handler + * @sp: current sequence in the LOGO exchange + * @fp: response frame + * @rp_arg: Fibre Channel remote port + * + * Locking Note: This function will be called without the rport lock + * held, but it will lock, call an _enter_* function or fc_rport_error + * and then unlock the rport. + */ +static void fc_rport_logo_resp(struct fc_seq *sp, struct fc_frame *fp, + void *rp_arg) +{ + struct fc_rport *rport = rp_arg; + struct fc_rport_libfc_priv *rdata = rport->dd_data; + u8 op; + + mutex_lock(&rdata->rp_mutex); + + FC_DEBUG_RPORT("Received a LOGO response from port (%6x)\n", + rport->port_id); + + if (IS_ERR(fp)) { + fc_rport_error(rport, fp); + goto err; + } + + if (rdata->rp_state != RPORT_ST_LOGO) { + FC_DEBUG_RPORT("Received a LOGO response, but in state %s\n", + fc_rport_state(rport)); + goto out; + } + + op = fc_frame_payload_op(fp); + if (op == ELS_LS_ACC) { + fc_rport_enter_rtv(rport); + } else { + FC_DBG("Bad ELS response\n"); + rdata->event = RPORT_EV_LOGO; + queue_work(rport_event_queue, &rdata->event_work); + } + +out: + fc_frame_free(fp); +err: + mutex_unlock(&rdata->rp_mutex); + put_device(&rport->dev); +} + +/** + * fc_rport_enter_prli - Send Process Login (PRLI) request to peer + * @rport: Fibre Channel remote port to send PRLI to + * + * Locking Note: The rport lock is expected to be held before calling + * this routine. + */ +static void fc_rport_enter_prli(struct fc_rport *rport) +{ + struct fc_rport_libfc_priv *rdata = rport->dd_data; + struct fc_lport *lport = rdata->local_port; + struct { + struct fc_els_prli prli; + struct fc_els_spp spp; + } *pp; + struct fc_frame *fp; + + FC_DEBUG_RPORT("Port (%6x) entered PRLI state from %s state\n", + rport->port_id, fc_rport_state(rport)); + + fc_rport_state_enter(rport, RPORT_ST_PRLI); + + fp = fc_frame_alloc(lport, sizeof(*pp)); + if (!fp) { + fc_rport_error(rport, fp); + return; + } + + if (!lport->tt.elsct_send(lport, rport, fp, ELS_PRLI, + fc_rport_prli_resp, rport, lport->e_d_tov)) + fc_rport_error(rport, fp); + else + get_device(&rport->dev); +} + +/** + * fc_rport_els_rtv_resp - Request Timeout Value response handler + * @sp: current sequence in the RTV exchange + * @fp: response frame + * @rp_arg: Fibre Channel remote port + * + * Many targets don't seem to support this. + * + * Locking Note: This function will be called without the rport lock + * held, but it will lock, call an _enter_* function or fc_rport_error + * and then unlock the rport. + */ +static void fc_rport_rtv_resp(struct fc_seq *sp, struct fc_frame *fp, + void *rp_arg) +{ + struct fc_rport *rport = rp_arg; + struct fc_rport_libfc_priv *rdata = rport->dd_data; + u8 op; + + mutex_lock(&rdata->rp_mutex); + + FC_DEBUG_RPORT("Received a RTV response from port (%6x)\n", + rport->port_id); + + if (rdata->rp_state != RPORT_ST_RTV) { + FC_DBG("Received a RTV response, but in state %s\n", + fc_rport_state(rport)); + goto out; + } + + if (IS_ERR(fp)) { + fc_rport_error(rport, fp); + goto err; + } + + op = fc_frame_payload_op(fp); + if (op == ELS_LS_ACC) { + struct fc_els_rtv_acc *rtv; + u32 toq; + u32 tov; + + rtv = fc_frame_payload_get(fp, sizeof(*rtv)); + if (rtv) { + toq = ntohl(rtv->rtv_toq); + tov = ntohl(rtv->rtv_r_a_tov); + if (tov == 0) + tov = 1; + rdata->r_a_tov = tov; + tov = ntohl(rtv->rtv_e_d_tov); + if (toq & FC_ELS_RTV_EDRES) + tov /= 1000000; + if (tov == 0) + tov = 1; + rdata->e_d_tov = tov; + } + } + + fc_rport_enter_ready(rport); + +out: + fc_frame_free(fp); +err: + mutex_unlock(&rdata->rp_mutex); + put_device(&rport->dev); +} + +/** + * fc_rport_enter_rtv - Send Request Timeout Value (RTV) request to peer + * @rport: Fibre Channel remote port to send RTV to + * + * Locking Note: The rport lock is expected to be held before calling + * this routine. + */ +static void fc_rport_enter_rtv(struct fc_rport *rport) +{ + struct fc_frame *fp; + struct fc_rport_libfc_priv *rdata = rport->dd_data; + struct fc_lport *lport = rdata->local_port; + + FC_DEBUG_RPORT("Port (%6x) entered RTV state from %s state\n", + rport->port_id, fc_rport_state(rport)); + + fc_rport_state_enter(rport, RPORT_ST_RTV); + + fp = fc_frame_alloc(lport, sizeof(struct fc_els_rtv)); + if (!fp) { + fc_rport_error(rport, fp); + return; + } + + if (!lport->tt.elsct_send(lport, rport, fp, ELS_RTV, + fc_rport_rtv_resp, rport, lport->e_d_tov)) + fc_rport_error(rport, fp); + else + get_device(&rport->dev); +} + +/** + * fc_rport_enter_logo - Send Logout (LOGO) request to peer + * @rport: Fibre Channel remote port to send LOGO to + * + * Locking Note: The rport lock is expected to be held before calling + * this routine. + */ +static void fc_rport_enter_logo(struct fc_rport *rport) +{ + struct fc_rport_libfc_priv *rdata = rport->dd_data; + struct fc_lport *lport = rdata->local_port; + struct fc_frame *fp; + + FC_DEBUG_RPORT("Port (%6x) entered LOGO state from %s state\n", + rport->port_id, fc_rport_state(rport)); + + fc_rport_state_enter(rport, RPORT_ST_LOGO); + + fp = fc_frame_alloc(lport, sizeof(struct fc_els_logo)); + if (!fp) { + fc_rport_error(rport, fp); + return; + } + + if (!lport->tt.elsct_send(lport, rport, fp, ELS_LOGO, + fc_rport_logo_resp, rport, lport->e_d_tov)) + fc_rport_error(rport, fp); + else + get_device(&rport->dev); +} + + +/** + * fc_rport_recv_req - Receive a request from a rport + * @sp: current sequence in the PLOGI exchange + * @fp: response frame + * @rp_arg: Fibre Channel remote port + * + * Locking Note: Called without the rport lock held. This + * function will hold the rport lock, call an _enter_* + * function and then unlock the rport. + */ +void fc_rport_recv_req(struct fc_seq *sp, struct fc_frame *fp, + struct fc_rport *rport) +{ + struct fc_rport_libfc_priv *rdata = rport->dd_data; + struct fc_lport *lport = rdata->local_port; + + struct fc_frame_header *fh; + struct fc_seq_els_data els_data; + u8 op; + + mutex_lock(&rdata->rp_mutex); + + els_data.fp = NULL; + els_data.explan = ELS_EXPL_NONE; + els_data.reason = ELS_RJT_NONE; + + fh = fc_frame_header_get(fp); + + if (fh->fh_r_ctl == FC_RCTL_ELS_REQ && fh->fh_type == FC_TYPE_ELS) { + op = fc_frame_payload_op(fp); + switch (op) { + case ELS_PLOGI: + fc_rport_recv_plogi_req(rport, sp, fp); + break; + case ELS_PRLI: + fc_rport_recv_prli_req(rport, sp, fp); + break; + case ELS_PRLO: + fc_rport_recv_prlo_req(rport, sp, fp); + break; + case ELS_LOGO: + fc_rport_recv_logo_req(rport, sp, fp); + break; + case ELS_RRQ: + els_data.fp = fp; + lport->tt.seq_els_rsp_send(sp, ELS_RRQ, &els_data); + break; + case ELS_REC: + els_data.fp = fp; + lport->tt.seq_els_rsp_send(sp, ELS_REC, &els_data); + break; + default: + els_data.reason = ELS_RJT_UNSUP; + lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &els_data); + break; + } + } + + mutex_unlock(&rdata->rp_mutex); +} + +/** + * fc_rport_recv_plogi_req - Handle incoming Port Login (PLOGI) request + * @rport: Fibre Channel remote port that initiated PLOGI + * @sp: current sequence in the PLOGI exchange + * @fp: PLOGI request frame + * + * Locking Note: The rport lock is exected to be held before calling + * this function. + */ +static void fc_rport_recv_plogi_req(struct fc_rport *rport, + struct fc_seq *sp, struct fc_frame *rx_fp) +{ + struct fc_rport_libfc_priv *rdata = rport->dd_data; + struct fc_lport *lport = rdata->local_port; + struct fc_frame *fp = rx_fp; + struct fc_exch *ep; + struct fc_frame_header *fh; + struct fc_els_flogi *pl; + struct fc_seq_els_data rjt_data; + u32 sid; + u64 wwpn; + u64 wwnn; + enum fc_els_rjt_reason reject = 0; + u32 f_ctl; + rjt_data.fp = NULL; + + fh = fc_frame_header_get(fp); + + FC_DEBUG_RPORT("Received PLOGI request from port (%6x) " + "while in state %s\n", ntoh24(fh->fh_s_id), + fc_rport_state(rport)); + + sid = ntoh24(fh->fh_s_id); + pl = fc_frame_payload_get(fp, sizeof(*pl)); + if (!pl) { + FC_DBG("incoming PLOGI from %x too short\n", sid); + WARN_ON(1); + /* XXX TBD: send reject? */ + fc_frame_free(fp); + return; + } + wwpn = get_unaligned_be64(&pl->fl_wwpn); + wwnn = get_unaligned_be64(&pl->fl_wwnn); + + /* + * If the session was just created, possibly due to the incoming PLOGI, + * set the state appropriately and accept the PLOGI. + * + * If we had also sent a PLOGI, and if the received PLOGI is from a + * higher WWPN, we accept it, otherwise an LS_RJT is sent with reason + * "command already in progress". + * + * XXX TBD: If the session was ready before, the PLOGI should result in + * all outstanding exchanges being reset. + */ + switch (rdata->rp_state) { + case RPORT_ST_INIT: + FC_DEBUG_RPORT("incoming PLOGI from %6x wwpn %llx state INIT " + "- reject\n", sid, wwpn); + reject = ELS_RJT_UNSUP; + break; + case RPORT_ST_PLOGI: + FC_DEBUG_RPORT("incoming PLOGI from %x in PLOGI state %d\n", + sid, rdata->rp_state); + if (wwpn < lport->wwpn) + reject = ELS_RJT_INPROG; + break; + case RPORT_ST_PRLI: + case RPORT_ST_READY: + FC_DEBUG_RPORT("incoming PLOGI from %x in logged-in state %d " + "- ignored for now\n", sid, rdata->rp_state); + /* XXX TBD - should reset */ + break; + case RPORT_ST_NONE: + default: + FC_DEBUG_RPORT("incoming PLOGI from %x in unexpected " + "state %d\n", sid, rdata->rp_state); + break; + } + + if (reject) { + rjt_data.reason = reject; + rjt_data.explan = ELS_EXPL_NONE; + lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &rjt_data); + fc_frame_free(fp); + } else { + fp = fc_frame_alloc(lport, sizeof(*pl)); + if (fp == NULL) { + fp = rx_fp; + rjt_data.reason = ELS_RJT_UNAB; + rjt_data.explan = ELS_EXPL_NONE; + lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &rjt_data); + fc_frame_free(fp); + } else { + sp = lport->tt.seq_start_next(sp); + WARN_ON(!sp); + fc_rport_set_name(rport, wwpn, wwnn); + + /* + * Get session payload size from incoming PLOGI. + */ + rport->maxframe_size = + fc_plogi_get_maxframe(pl, lport->mfs); + fc_frame_free(rx_fp); + fc_plogi_fill(lport, fp, ELS_LS_ACC); + + /* + * Send LS_ACC. If this fails, + * the originator should retry. + */ + f_ctl = FC_FC_EX_CTX | FC_FC_LAST_SEQ; + f_ctl |= FC_FC_END_SEQ | FC_FC_SEQ_INIT; + ep = fc_seq_exch(sp); + fc_fill_fc_hdr(fp, FC_RCTL_ELS_REP, ep->did, ep->sid, + FC_TYPE_ELS, f_ctl, 0); + lport->tt.seq_send(lport, sp, fp); + if (rdata->rp_state == RPORT_ST_PLOGI) + fc_rport_enter_prli(rport); + } + } +} + +/** + * fc_rport_recv_prli_req - Handle incoming Process Login (PRLI) request + * @rport: Fibre Channel remote port that initiated PRLI + * @sp: current sequence in the PRLI exchange + * @fp: PRLI request frame + * + * Locking Note: The rport lock is exected to be held before calling + * this function. + */ +static void fc_rport_recv_prli_req(struct fc_rport *rport, + struct fc_seq *sp, struct fc_frame *rx_fp) +{ + struct fc_rport_libfc_priv *rdata = rport->dd_data; + struct fc_lport *lport = rdata->local_port; + struct fc_exch *ep; + struct fc_frame *fp; + struct fc_frame_header *fh; + struct { + struct fc_els_prli prli; + struct fc_els_spp spp; + } *pp; + struct fc_els_spp *rspp; /* request service param page */ + struct fc_els_spp *spp; /* response spp */ + unsigned int len; + unsigned int plen; + enum fc_els_rjt_reason reason = ELS_RJT_UNAB; + enum fc_els_rjt_explan explan = ELS_EXPL_NONE; + enum fc_els_spp_resp resp; + struct fc_seq_els_data rjt_data; + u32 f_ctl; + u32 fcp_parm; + u32 roles = FC_RPORT_ROLE_UNKNOWN; + rjt_data.fp = NULL; + + fh = fc_frame_header_get(rx_fp); + + FC_DEBUG_RPORT("Received PRLI request from port (%6x) " + "while in state %s\n", ntoh24(fh->fh_s_id), + fc_rport_state(rport)); + + switch (rdata->rp_state) { + case RPORT_ST_PRLI: + case RPORT_ST_READY: + reason = ELS_RJT_NONE; + break; + default: + break; + } + len = fr_len(rx_fp) - sizeof(*fh); + pp = fc_frame_payload_get(rx_fp, sizeof(*pp)); + if (pp == NULL) { + reason = ELS_RJT_PROT; + explan = ELS_EXPL_INV_LEN; + } else { + plen = ntohs(pp->prli.prli_len); + if ((plen % 4) != 0 || plen > len) { + reason = ELS_RJT_PROT; + explan = ELS_EXPL_INV_LEN; + } else if (plen < len) { + len = plen; + } + plen = pp->prli.prli_spp_len; + if ((plen % 4) != 0 || plen < sizeof(*spp) || + plen > len || len < sizeof(*pp)) { + reason = ELS_RJT_PROT; + explan = ELS_EXPL_INV_LEN; + } + rspp = &pp->spp; + } + if (reason != ELS_RJT_NONE || + (fp = fc_frame_alloc(lport, len)) == NULL) { + rjt_data.reason = reason; + rjt_data.explan = explan; + lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &rjt_data); + } else { + sp = lport->tt.seq_start_next(sp); + WARN_ON(!sp); + pp = fc_frame_payload_get(fp, len); + WARN_ON(!pp); + memset(pp, 0, len); + pp->prli.prli_cmd = ELS_LS_ACC; + pp->prli.prli_spp_len = plen; + pp->prli.prli_len = htons(len); + len -= sizeof(struct fc_els_prli); + + /* + * Go through all the service parameter pages and build + * response. If plen indicates longer SPP than standard, + * use that. The entire response has been pre-cleared above. + */ + spp = &pp->spp; + while (len >= plen) { + spp->spp_type = rspp->spp_type; + spp->spp_type_ext = rspp->spp_type_ext; + spp->spp_flags = rspp->spp_flags & FC_SPP_EST_IMG_PAIR; + resp = FC_SPP_RESP_ACK; + if (rspp->spp_flags & FC_SPP_RPA_VAL) + resp = FC_SPP_RESP_NO_PA; + switch (rspp->spp_type) { + case 0: /* common to all FC-4 types */ + break; + case FC_TYPE_FCP: + fcp_parm = ntohl(rspp->spp_params); + if (fcp_parm * FCP_SPPF_RETRY) + rdata->flags |= FC_RP_FLAGS_RETRY; + rport->supported_classes = FC_COS_CLASS3; + if (fcp_parm & FCP_SPPF_INIT_FCN) + roles |= FC_RPORT_ROLE_FCP_INITIATOR; + if (fcp_parm & FCP_SPPF_TARG_FCN) + roles |= FC_RPORT_ROLE_FCP_TARGET; + rport->roles = roles; + + spp->spp_params = + htonl(lport->service_params); + break; + default: + resp = FC_SPP_RESP_INVL; + break; + } + spp->spp_flags |= resp; + len -= plen; + rspp = (struct fc_els_spp *)((char *)rspp + plen); + spp = (struct fc_els_spp *)((char *)spp + plen); + } + + /* + * Send LS_ACC. If this fails, the originator should retry. + */ + f_ctl = FC_FC_EX_CTX | FC_FC_LAST_SEQ; + f_ctl |= FC_FC_END_SEQ | FC_FC_SEQ_INIT; + ep = fc_seq_exch(sp); + fc_fill_fc_hdr(fp, FC_RCTL_ELS_REP, ep->did, ep->sid, + FC_TYPE_ELS, f_ctl, 0); + lport->tt.seq_send(lport, sp, fp); + + /* + * Get lock and re-check state. + */ + switch (rdata->rp_state) { + case RPORT_ST_PRLI: + fc_rport_enter_ready(rport); + break; + case RPORT_ST_READY: + break; + default: + break; + } + } + fc_frame_free(rx_fp); +} + +/** + * fc_rport_recv_prlo_req - Handle incoming Process Logout (PRLO) request + * @rport: Fibre Channel remote port that initiated PRLO + * @sp: current sequence in the PRLO exchange + * @fp: PRLO request frame + * + * Locking Note: The rport lock is exected to be held before calling + * this function. + */ +static void fc_rport_recv_prlo_req(struct fc_rport *rport, struct fc_seq *sp, + struct fc_frame *fp) +{ + struct fc_rport_libfc_priv *rdata = rport->dd_data; + struct fc_lport *lport = rdata->local_port; + + struct fc_frame_header *fh; + struct fc_seq_els_data rjt_data; + + fh = fc_frame_header_get(fp); + + FC_DEBUG_RPORT("Received PRLO request from port (%6x) " + "while in state %s\n", ntoh24(fh->fh_s_id), + fc_rport_state(rport)); + + rjt_data.fp = NULL; + rjt_data.reason = ELS_RJT_UNAB; + rjt_data.explan = ELS_EXPL_NONE; + lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &rjt_data); + fc_frame_free(fp); +} + +/** + * fc_rport_recv_logo_req - Handle incoming Logout (LOGO) request + * @rport: Fibre Channel remote port that initiated LOGO + * @sp: current sequence in the LOGO exchange + * @fp: LOGO request frame + * + * Locking Note: The rport lock is exected to be held before calling + * this function. + */ +static void fc_rport_recv_logo_req(struct fc_rport *rport, struct fc_seq *sp, + struct fc_frame *fp) +{ + struct fc_frame_header *fh; + struct fc_rport_libfc_priv *rdata = rport->dd_data; + struct fc_lport *lport = rdata->local_port; + + fh = fc_frame_header_get(fp); + + FC_DEBUG_RPORT("Received LOGO request from port (%6x) " + "while in state %s\n", ntoh24(fh->fh_s_id), + fc_rport_state(rport)); + + rdata->event = RPORT_EV_LOGO; + queue_work(rport_event_queue, &rdata->event_work); + + lport->tt.seq_els_rsp_send(sp, ELS_LS_ACC, NULL); + fc_frame_free(fp); +} + +static void fc_rport_flush_queue(void) +{ + flush_workqueue(rport_event_queue); +} + + +int fc_rport_init(struct fc_lport *lport) +{ + if (!lport->tt.rport_login) + lport->tt.rport_login = fc_rport_login; + + if (!lport->tt.rport_logoff) + lport->tt.rport_logoff = fc_rport_logoff; + + if (!lport->tt.rport_recv_req) + lport->tt.rport_recv_req = fc_rport_recv_req; + + if (!lport->tt.rport_flush_queue) + lport->tt.rport_flush_queue = fc_rport_flush_queue; + + return 0; +} +EXPORT_SYMBOL(fc_rport_init); + +int fc_setup_rport() +{ + rport_event_queue = create_singlethread_workqueue("fc_rport_eq"); + if (!rport_event_queue) + return -ENOMEM; + return 0; +} +EXPORT_SYMBOL(fc_setup_rport); + +void fc_destroy_rport() +{ + destroy_workqueue(rport_event_queue); +} +EXPORT_SYMBOL(fc_destroy_rport); + +void fc_rport_terminate_io(struct fc_rport *rport) +{ + struct fc_rport_libfc_priv *rdata = rport->dd_data; + struct fc_lport *lport = rdata->local_port; + + lport->tt.exch_mgr_reset(lport->emp, 0, rport->port_id); + lport->tt.exch_mgr_reset(lport->emp, rport->port_id, 0); +} +EXPORT_SYMBOL(fc_rport_terminate_io); diff --git a/include/scsi/fc_encode.h b/include/scsi/fc_encode.h new file mode 100644 index 0000000..6300f55 --- /dev/null +++ b/include/scsi/fc_encode.h @@ -0,0 +1,309 @@ +/* + * Copyright(c) 2008 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Maintained at www.Open-FCoE.org + */ + +#ifndef _FC_ENCODE_H_ +#define _FC_ENCODE_H_ +#include <asm/unaligned.h> + +struct fc_ns_rft { + struct fc_ns_fid fid; /* port ID object */ + struct fc_ns_fts fts; /* FC4-types object */ +}; + +struct fc_ct_req { + struct fc_ct_hdr hdr; + union { + struct fc_ns_gid_ft gid; + struct fc_ns_rn_id rn; + struct fc_ns_rft rft; + } payload; +}; + +/** + * fill FC header fields in specified fc_frame + */ +static inline void fc_fill_fc_hdr(struct fc_frame *fp, enum fc_rctl r_ctl, + u32 did, u32 sid, enum fc_fh_type type, + u32 f_ctl, u32 parm_offset) +{ + struct fc_frame_header *fh; + + fh = fc_frame_header_get(fp); + WARN_ON(r_ctl == 0); + fh->fh_r_ctl = r_ctl; + hton24(fh->fh_d_id, did); + hton24(fh->fh_s_id, sid); + fh->fh_type = type; + hton24(fh->fh_f_ctl, f_ctl); + fh->fh_cs_ctl = 0; + fh->fh_df_ctl = 0; + fh->fh_parm_offset = htonl(parm_offset); +} + +/** + * fc_ct_hdr_fill- fills ct header and reset ct payload + * returns pointer to ct request. + */ +static inline struct fc_ct_req *fc_ct_hdr_fill(const struct fc_frame *fp, + unsigned int op, size_t req_size) +{ + struct fc_ct_req *ct; + size_t ct_plen; + + ct_plen = sizeof(struct fc_ct_hdr) + req_size; + ct = fc_frame_payload_get(fp, ct_plen); + memset(ct, 0, ct_plen); + ct->hdr.ct_rev = FC_CT_REV; + ct->hdr.ct_fs_type = FC_FST_DIR; + ct->hdr.ct_fs_subtype = FC_NS_SUBTYPE; + ct->hdr.ct_cmd = htons((u16) op); + return ct; +} + +/** + * fc_ct_fill - Fill in a name service request frame + */ +static inline int fc_ct_fill(struct fc_lport *lport, struct fc_frame *fp, + unsigned int op, enum fc_rctl *r_ctl, u32 *did, + enum fc_fh_type *fh_type) +{ + struct fc_ct_req *ct; + + switch (op) { + case FC_NS_GPN_FT: + ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_gid_ft)); + ct->payload.gid.fn_fc4_type = FC_TYPE_FCP; + break; + + case FC_NS_RFT_ID: + ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rft)); + hton24(ct->payload.rft.fid.fp_fid, + fc_host_port_id(lport->host)); + ct->payload.rft.fts = lport->fcts; + break; + + case FC_NS_RPN_ID: + ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rn_id)); + hton24(ct->payload.rn.fr_fid.fp_fid, + fc_host_port_id(lport->host)); + ct->payload.rft.fts = lport->fcts; + put_unaligned_be64(lport->wwpn, &ct->payload.rn.fr_wwn); + break; + + default: + FC_DBG("Invalid op code %x \n", op); + return -EINVAL; + } + *r_ctl = FC_RCTL_DD_UNSOL_CTL; + *did = FC_FID_DIR_SERV; + *fh_type = FC_TYPE_CT; + return 0; +} + +/** + * fc_plogi_fill - Fill in plogi request frame + */ +static inline void fc_plogi_fill(struct fc_lport *lport, struct fc_frame *fp, + unsigned int op) +{ + struct fc_els_flogi *plogi; + struct fc_els_csp *csp; + struct fc_els_cssp *cp; + + plogi = fc_frame_payload_get(fp, sizeof(*plogi)); + memset(plogi, 0, sizeof(*plogi)); + plogi->fl_cmd = (u8) op; + put_unaligned_be64(lport->wwpn, &plogi->fl_wwpn); + put_unaligned_be64(lport->wwnn, &plogi->fl_wwnn); + + csp = &plogi->fl_csp; + csp->sp_hi_ver = 0x20; + csp->sp_lo_ver = 0x20; + csp->sp_bb_cred = htons(10); /* this gets set by gateway */ + csp->sp_bb_data = htons((u16) lport->mfs); + cp = &plogi->fl_cssp[3 - 1]; /* class 3 parameters */ + cp->cp_class = htons(FC_CPC_VALID | FC_CPC_SEQ); + csp->sp_features = htons(FC_SP_FT_CIRO); + csp->sp_tot_seq = htons(255); /* seq. we accept */ + csp->sp_rel_off = htons(0x1f); + csp->sp_e_d_tov = htonl(lport->e_d_tov); + + cp->cp_rdfs = htons((u16) lport->mfs); + cp->cp_con_seq = htons(255); + cp->cp_open_seq = 1; +} + +/** + * fc_flogi_fill - Fill in a flogi request frame. + */ +static inline void fc_flogi_fill(struct fc_lport *lport, struct fc_frame *fp) +{ + struct fc_els_csp *sp; + struct fc_els_cssp *cp; + struct fc_els_flogi *flogi; + + flogi = fc_frame_payload_get(fp, sizeof(*flogi)); + memset(flogi, 0, sizeof(*flogi)); + flogi->fl_cmd = (u8) ELS_FLOGI; + put_unaligned_be64(lport->wwpn, &flogi->fl_wwpn); + put_unaligned_be64(lport->wwnn, &flogi->fl_wwnn); + sp = &flogi->fl_csp; + sp->sp_hi_ver = 0x20; + sp->sp_lo_ver = 0x20; + sp->sp_bb_cred = htons(10); /* this gets set by gateway */ + sp->sp_bb_data = htons((u16) lport->mfs); + cp = &flogi->fl_cssp[3 - 1]; /* class 3 parameters */ + cp->cp_class = htons(FC_CPC_VALID | FC_CPC_SEQ); +} + +/** + * fc_logo_fill - Fill in a logo request frame. + */ +static inline void fc_logo_fill(struct fc_lport *lport, struct fc_frame *fp) +{ + struct fc_els_logo *logo; + + logo = fc_frame_payload_get(fp, sizeof(*logo)); + memset(logo, 0, sizeof(*logo)); + logo->fl_cmd = ELS_LOGO; + hton24(logo->fl_n_port_id, fc_host_port_id(lport->host)); + logo->fl_n_port_wwn = htonll(lport->wwpn); +} + +/** + * fc_rtv_fill - Fill in RTV (read timeout value) request frame. + */ +static inline void fc_rtv_fill(struct fc_lport *lport, struct fc_frame *fp) +{ + struct fc_els_rtv *rtv; + + rtv = fc_frame_payload_get(fp, sizeof(*rtv)); + memset(rtv, 0, sizeof(*rtv)); + rtv->rtv_cmd = ELS_RTV; +} + +/** + * fc_rec_fill - Fill in rec request frame + */ +static inline void fc_rec_fill(struct fc_lport *lport, struct fc_frame *fp) +{ + struct fc_els_rec *rec; + struct fc_exch *ep = fc_seq_exch(fr_seq(fp)); + + rec = fc_frame_payload_get(fp, sizeof(*rec)); + memset(rec, 0, sizeof(*rec)); + rec->rec_cmd = ELS_REC; + hton24(rec->rec_s_id, fc_host_port_id(lport->host)); + rec->rec_ox_id = htons(ep->oxid); + rec->rec_rx_id = htons(ep->rxid); +} + +/** + * fc_prli_fill - Fill in prli request frame + */ +static inline void fc_prli_fill(struct fc_lport *lport, struct fc_frame *fp) +{ + struct { + struct fc_els_prli prli; + struct fc_els_spp spp; + } *pp; + + pp = fc_frame_payload_get(fp, sizeof(*pp)); + memset(pp, 0, sizeof(*pp)); + pp->prli.prli_cmd = ELS_PRLI; + pp->prli.prli_spp_len = sizeof(struct fc_els_spp); + pp->prli.prli_len = htons(sizeof(*pp)); + pp->spp.spp_type = FC_TYPE_FCP; + pp->spp.spp_flags = FC_SPP_EST_IMG_PAIR; + pp->spp.spp_params = htonl(lport->service_params); +} + +/** + * fc_scr_fill - Fill in a scr request frame. + */ +static inline void fc_scr_fill(struct fc_lport *lport, struct fc_frame *fp) +{ + struct fc_els_scr *scr; + + scr = fc_frame_payload_get(fp, sizeof(*scr)); + memset(scr, 0, sizeof(*scr)); + scr->scr_cmd = ELS_SCR; + scr->scr_reg_func = ELS_SCRF_FULL; +} + +/** + * fc_els_fill - Fill in an ELS request frame + */ +static inline int fc_els_fill(struct fc_lport *lport, struct fc_rport *rport, + struct fc_frame *fp, unsigned int op, + enum fc_rctl *r_ctl, u32 *did, enum fc_fh_type *fh_type) +{ + switch (op) { + case ELS_PLOGI: + fc_plogi_fill(lport, fp, ELS_PLOGI); + *did = rport->port_id; + break; + + case ELS_FLOGI: + fc_flogi_fill(lport, fp); + *did = FC_FID_FLOGI; + break; + + case ELS_LOGO: + fc_logo_fill(lport, fp); + *did = FC_FID_FLOGI; + /* + * if rport is valid then it + * is port logo, therefore + * set did to rport id. + */ + if (rport) + *did = rport->port_id; + break; + + case ELS_RTV: + fc_rtv_fill(lport, fp); + *did = rport->port_id; + break; + + case ELS_REC: + fc_rec_fill(lport, fp); + *did = rport->port_id; + break; + + case ELS_PRLI: + fc_prli_fill(lport, fp); + *did = rport->port_id; + break; + + case ELS_SCR: + fc_scr_fill(lport, fp); + *did = FC_FID_FCTRL; + break; + + default: + FC_DBG("Invalid op code %x \n", op); + return -EINVAL; + } + + *r_ctl = FC_RCTL_ELS_REQ; + *fh_type = FC_TYPE_ELS; + return 0; +} +#endif /* _FC_ENCODE_H_ */ diff --git a/include/scsi/fc_frame.h b/include/scsi/fc_frame.h new file mode 100644 index 0000000..04d34a7 --- /dev/null +++ b/include/scsi/fc_frame.h @@ -0,0 +1,242 @@ +/* + * Copyright(c) 2007 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Maintained at www.Open-FCoE.org + */ + +#ifndef _FC_FRAME_H_ +#define _FC_FRAME_H_ + +#include <linux/scatterlist.h> +#include <linux/skbuff.h> +#include <scsi/scsi_cmnd.h> + +#include <scsi/fc/fc_fs.h> +#include <scsi/fc/fc_fcp.h> +#include <scsi/fc/fc_encaps.h> + +/* + * The fc_frame interface is used to pass frame data between functions. + * The frame includes the data buffer, length, and SOF / EOF delimiter types. + * A pointer to the port structure of the receiving port is also includeded. + */ + +#define FC_FRAME_HEADROOM 32 /* headroom for VLAN + FCoE headers */ +#define FC_FRAME_TAILROOM 8 /* trailer space for FCoE */ + +/* + * Information about an individual fibre channel frame received or to be sent. + * The buffer may be in up to 4 additional non-contiguous sections, + * but the linear section must hold the frame header. + */ +#define FC_FRAME_SG_LEN 4 /* scatter/gather list maximum length */ + +#define fp_skb(fp) (&((fp)->skb)) +#define fr_hdr(fp) ((fp)->skb.data) +#define fr_len(fp) ((fp)->skb.len) +#define fr_cb(fp) ((struct fcoe_rcv_info *)&((fp)->skb.cb[0])) +#define fr_dev(fp) (fr_cb(fp)->fr_dev) +#define fr_seq(fp) (fr_cb(fp)->fr_seq) +#define fr_sof(fp) (fr_cb(fp)->fr_sof) +#define fr_eof(fp) (fr_cb(fp)->fr_eof) +#define fr_flags(fp) (fr_cb(fp)->fr_flags) +#define fr_max_payload(fp) (fr_cb(fp)->fr_max_payload) +#define fr_cmd(fp) (fr_cb(fp)->fr_cmd) +#define fr_dir(fp) (fr_cmd(fp)->sc_data_direction) +#define fr_crc(fp) (fr_cb(fp)->fr_crc) + +struct fc_frame { + struct sk_buff skb; +}; + +struct fcoe_rcv_info { + struct packet_type *ptype; + struct fc_lport *fr_dev; /* transport layer private pointer */ + struct fc_seq *fr_seq; /* for use with exchange manager */ + struct scsi_cmnd *fr_cmd; /* for use of scsi command */ + u32 fr_crc; + u16 fr_max_payload; /* max FC payload */ + enum fc_sof fr_sof; /* start of frame delimiter */ + enum fc_eof fr_eof; /* end of frame delimiter */ + u8 fr_flags; /* flags - see below */ +}; + + +/* + * Get fc_frame pointer for an skb that's already been imported. + */ +static inline struct fcoe_rcv_info *fcoe_dev_from_skb(const struct sk_buff *skb) +{ + BUILD_BUG_ON(sizeof(struct fcoe_rcv_info) > sizeof(skb->cb)); + return (struct fcoe_rcv_info *) skb->cb; +} + +/* + * fr_flags. + */ +#define FCPHF_CRC_UNCHECKED 0x01 /* CRC not computed, still appended */ + +/* + * Initialize a frame. + * We don't do a complete memset here for performance reasons. + * The caller must set fr_free, fr_hdr, fr_len, fr_sof, and fr_eof eventually. + */ +static inline void fc_frame_init(struct fc_frame *fp) +{ + fr_dev(fp) = NULL; + fr_seq(fp) = NULL; + fr_flags(fp) = 0; +} + +struct fc_frame *fc_frame_alloc_fill(struct fc_lport *, size_t payload_len); + +struct fc_frame *__fc_frame_alloc(size_t payload_len); + +/* + * Get frame for sending via port. + */ +static inline struct fc_frame *_fc_frame_alloc(struct fc_lport *dev, + size_t payload_len) +{ + return __fc_frame_alloc(payload_len); +} + +/* + * Allocate fc_frame structure and buffer. Set the initial length to + * payload_size + sizeof (struct fc_frame_header). + */ +static inline struct fc_frame *fc_frame_alloc(struct fc_lport *dev, size_t len) +{ + struct fc_frame *fp; + + /* + * Note: Since len will often be a constant multiple of 4, + * this check will usually be evaluated and eliminated at compile time. + */ + if ((len % 4) != 0) + fp = fc_frame_alloc_fill(dev, len); + else + fp = _fc_frame_alloc(dev, len); + return fp; +} + +/* + * Free the fc_frame structure and buffer. + */ +static inline void fc_frame_free(struct fc_frame *fp) +{ + kfree_skb(fp_skb(fp)); +} + +static inline int fc_frame_is_linear(struct fc_frame *fp) +{ + return !skb_is_nonlinear(fp_skb(fp)); +} + +/* + * Get frame header from message in fc_frame structure. + * This hides a cast and provides a place to add some checking. + */ +static inline +struct fc_frame_header *fc_frame_header_get(const struct fc_frame *fp) +{ + WARN_ON(fr_len(fp) < sizeof(struct fc_frame_header)); + return (struct fc_frame_header *) fr_hdr(fp); +} + +/* + * Get frame payload from message in fc_frame structure. + * This hides a cast and provides a place to add some checking. + * The len parameter is the minimum length for the payload portion. + * Returns NULL if the frame is too short. + * + * This assumes the interesting part of the payload is in the first part + * of the buffer for received data. This may not be appropriate to use for + * buffers being transmitted. + */ +static inline void *fc_frame_payload_get(const struct fc_frame *fp, + size_t len) +{ + void *pp = NULL; + + if (fr_len(fp) >= sizeof(struct fc_frame_header) + len) + pp = fc_frame_header_get(fp) + 1; + return pp; +} + +/* + * Get frame payload opcode (first byte) from message in fc_frame structure. + * This hides a cast and provides a place to add some checking. Return 0 + * if the frame has no payload. + */ +static inline u8 fc_frame_payload_op(const struct fc_frame *fp) +{ + u8 *cp; + + cp = fc_frame_payload_get(fp, sizeof(u8)); + if (!cp) + return 0; + return *cp; + +} + +/* + * Get FC class from frame. + */ +static inline enum fc_class fc_frame_class(const struct fc_frame *fp) +{ + return fc_sof_class(fr_sof(fp)); +} + +/* + * Check the CRC in a frame. + * The CRC immediately follows the last data item *AFTER* the length. + * The return value is zero if the CRC matches. + */ +u32 fc_frame_crc_check(struct fc_frame *); + +static inline u8 fc_frame_rctl(const struct fc_frame *fp) +{ + return fc_frame_header_get(fp)->fh_r_ctl; +} + +static inline bool fc_frame_is_cmd(const struct fc_frame *fp) +{ + return fc_frame_rctl(fp) == FC_RCTL_DD_UNSOL_CMD; +} + +static inline bool fc_frame_is_read(const struct fc_frame *fp) +{ + if (fc_frame_is_cmd(fp) && fr_cmd(fp)) + return fr_dir(fp) == DMA_FROM_DEVICE; + return false; +} + +static inline bool fc_frame_is_write(const struct fc_frame *fp) +{ + if (fc_frame_is_cmd(fp) && fr_cmd(fp)) + return fr_dir(fp) == DMA_TO_DEVICE; + return false; +} + +/* + * Check for leaks. + * Print the frame header of any currently allocated frame, assuming there + * should be none at this point. + */ +void fc_frame_leak_check(void); + +#endif /* _FC_FRAME_H_ */ diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h new file mode 100644 index 0000000..9f28763 --- /dev/null +++ b/include/scsi/libfc.h @@ -0,0 +1,938 @@ +/* + * Copyright(c) 2007 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Maintained at www.Open-FCoE.org + */ + +#ifndef _LIBFC_H_ +#define _LIBFC_H_ + +#include <linux/timer.h> +#include <linux/if.h> + +#include <scsi/scsi_transport.h> +#include <scsi/scsi_transport_fc.h> + +#include <scsi/fc/fc_fcp.h> +#include <scsi/fc/fc_ns.h> +#include <scsi/fc/fc_els.h> +#include <scsi/fc/fc_gs.h> + +#include <scsi/fc_frame.h> + +#define LIBFC_DEBUG + +#ifdef LIBFC_DEBUG +/* Log messages */ +#define FC_DBG(fmt, args...) \ + do { \ + printk(KERN_INFO "%s " fmt, __func__, ##args); \ + } while (0) +#else +#define FC_DBG(fmt, args...) +#endif + +/* + * libfc error codes + */ +#define FC_NO_ERR 0 /* no error */ +#define FC_EX_TIMEOUT 1 /* Exchange timeout */ +#define FC_EX_CLOSED 2 /* Exchange closed */ + +/* some helpful macros */ + +#define ntohll(x) be64_to_cpu(x) +#define htonll(x) cpu_to_be64(x) + +#define ntoh24(p) (((p)[0] << 16) | ((p)[1] << 8) | ((p)[2])) + +#define hton24(p, v) do { \ + p[0] = (((v) >> 16) & 0xFF); \ + p[1] = (((v) >> 8) & 0xFF); \ + p[2] = ((v) & 0xFF); \ + } while (0) + +/* + * FC HBA status + */ +#define FC_PAUSE (1 << 1) +#define FC_LINK_UP (1 << 0) + +enum fc_lport_state { + LPORT_ST_NONE = 0, + LPORT_ST_FLOGI, + LPORT_ST_DNS, + LPORT_ST_RPN_ID, + LPORT_ST_RFT_ID, + LPORT_ST_SCR, + LPORT_ST_READY, + LPORT_ST_LOGO, + LPORT_ST_RESET +}; + +enum fc_disc_event { + DISC_EV_NONE = 0, + DISC_EV_SUCCESS, + DISC_EV_FAILED +}; + +enum fc_rport_state { + RPORT_ST_NONE = 0, + RPORT_ST_INIT, /* initialized */ + RPORT_ST_PLOGI, /* waiting for PLOGI completion */ + RPORT_ST_PRLI, /* waiting for PRLI completion */ + RPORT_ST_RTV, /* waiting for RTV completion */ + RPORT_ST_READY, /* ready for use */ + RPORT_ST_LOGO, /* port logout sent */ +}; + +enum fc_rport_trans_state { + FC_PORTSTATE_ROGUE, + FC_PORTSTATE_REAL, +}; + +/** + * struct fc_disc_port - temporary discovery port to hold rport identifiers + * @lp: Fibre Channel host port instance + * @peers: node for list management during discovery and RSCN processing + * @ids: identifiers structure to pass to fc_remote_port_add() + * @rport_work: work struct for starting the rport state machine + */ +struct fc_disc_port { + struct fc_lport *lp; + struct list_head peers; + struct fc_rport_identifiers ids; + struct work_struct rport_work; +}; + +enum fc_rport_event { + RPORT_EV_NONE = 0, + RPORT_EV_CREATED, + RPORT_EV_FAILED, + RPORT_EV_STOP, + RPORT_EV_LOGO +}; + +struct fc_rport_operations { + void (*event_callback)(struct fc_lport *, struct fc_rport *, + enum fc_rport_event); +}; + +/** + * struct fc_rport_libfc_priv - libfc internal information about a remote port + * @local_port: Fibre Channel host port instance + * @rp_state: state tracks progress of PLOGI, PRLI, and RTV exchanges + * @flags: REC and RETRY supported flags + * @max_seq: maximum number of concurrent sequences + * @retries: retry count in current state + * @e_d_tov: error detect timeout value (in msec) + * @r_a_tov: resource allocation timeout value (in msec) + * @rp_mutex: mutex protects rport + * @retry_work: + * @event_callback: Callback for rport READY, FAILED or LOGO + */ +struct fc_rport_libfc_priv { + struct fc_lport *local_port; + enum fc_rport_state rp_state; + u16 flags; + #define FC_RP_FLAGS_REC_SUPPORTED (1 << 0) + #define FC_RP_FLAGS_RETRY (1 << 1) + u16 max_seq; + unsigned int retries; + unsigned int e_d_tov; + unsigned int r_a_tov; + enum fc_rport_trans_state trans_state; + struct mutex rp_mutex; + struct delayed_work retry_work; + enum fc_rport_event event; + struct fc_rport_operations *ops; + struct list_head peers; + struct work_struct event_work; +}; + +#define PRIV_TO_RPORT(x) \ + (struct fc_rport *)((void *)x - sizeof(struct fc_rport)); +#define RPORT_TO_PRIV(x) \ + (struct fc_rport_libfc_priv *)((void *)x + sizeof(struct fc_rport)); + +struct fc_rport *fc_rport_rogue_create(struct fc_disc_port *); + +static inline void fc_rport_set_name(struct fc_rport *rport, u64 wwpn, u64 wwnn) +{ + rport->node_name = wwnn; + rport->port_name = wwpn; +} + +/* + * fcoe stats structure + */ +struct fcoe_dev_stats { + u64 SecondsSinceLastReset; + u64 TxFrames; + u64 TxWords; + u64 RxFrames; + u64 RxWords; + u64 ErrorFrames; + u64 DumpedFrames; + u64 LinkFailureCount; + u64 LossOfSignalCount; + u64 InvalidTxWordCount; + u64 InvalidCRCCount; + u64 InputRequests; + u64 OutputRequests; + u64 ControlRequests; + u64 InputMegabytes; + u64 OutputMegabytes; +}; + +/* + * els data is used for passing ELS respone specific + * data to send ELS response mainly using infomation + * in exchange and sequence in EM layer. + */ +struct fc_seq_els_data { + struct fc_frame *fp; + enum fc_els_rjt_reason reason; + enum fc_els_rjt_explan explan; +}; + +/* + * FCP request structure, one for each scsi cmd request + */ +struct fc_fcp_pkt { + /* + * housekeeping stuff + */ + struct fc_lport *lp; /* handle to hba struct */ + u16 state; /* scsi_pkt state state */ + u16 tgt_flags; /* target flags */ + atomic_t ref_cnt; /* fcp pkt ref count */ + spinlock_t scsi_pkt_lock; /* Must be taken before the host lock + * if both are held at the same time */ + /* + * SCSI I/O related stuff + */ + struct scsi_cmnd *cmd; /* scsi command pointer. set/clear + * under host lock */ + struct list_head list; /* tracks queued commands. access under + * host lock */ + /* + * timeout related stuff + */ + struct timer_list timer; /* command timer */ + struct completion tm_done; + int wait_for_comp; + unsigned long start_time; /* start jiffie */ + unsigned long end_time; /* end jiffie */ + unsigned long last_pkt_time; /* jiffies of last frame received */ + + /* + * scsi cmd and data transfer information + */ + u32 data_len; + /* + * transport related veriables + */ + struct fcp_cmnd cdb_cmd; + size_t xfer_len; + u32 xfer_contig_end; /* offset of end of contiguous xfer */ + u16 max_payload; /* max payload size in bytes */ + + /* + * scsi/fcp return status + */ + u32 io_status; /* SCSI result upper 24 bits */ + u8 cdb_status; + u8 status_code; /* FCP I/O status */ + /* bit 3 Underrun bit 2: overrun */ + u8 scsi_comp_flags; + u32 req_flags; /* bit 0: read bit:1 write */ + u32 scsi_resid; /* residule length */ + + struct fc_rport *rport; /* remote port pointer */ + struct fc_seq *seq_ptr; /* current sequence pointer */ + /* + * Error Processing + */ + u8 recov_retry; /* count of recovery retries */ + struct fc_seq *recov_seq; /* sequence for REC or SRR */ +}; + +/* + * Structure and function definitions for managing Fibre Channel Exchanges + * and Sequences + * + * fc_exch holds state for one exchange and links to its active sequence. + * + * fc_seq holds the state for an individual sequence. + */ + +struct fc_exch_mgr; + +/* + * Sequence. + */ +struct fc_seq { + u8 id; /* seq ID */ + u16 ssb_stat; /* status flags for sequence status block */ + u16 cnt; /* frames sent so far on sequence */ + u32 rec_data; /* FC-4 value for REC */ +}; + +#define FC_EX_DONE (1 << 0) /* ep is completed */ +#define FC_EX_RST_CLEANUP (1 << 1) /* reset is forcing completion */ + +/* + * Exchange. + * + * Locking notes: The ex_lock protects following items: + * state, esb_stat, f_ctl, seq.ssb_stat + * seq_id + * sequence allocation + */ +struct fc_exch { + struct fc_exch_mgr *em; /* exchange manager */ + u32 state; /* internal driver state */ + u16 xid; /* our exchange ID */ + struct list_head ex_list; /* free or busy list linkage */ + spinlock_t ex_lock; /* lock covering exchange state */ + atomic_t ex_refcnt; /* reference counter */ + struct delayed_work timeout_work; /* timer for upper level protocols */ + struct fc_lport *lp; /* fc device instance */ + u16 oxid; /* originator's exchange ID */ + u16 rxid; /* responder's exchange ID */ + u32 oid; /* originator's FCID */ + u32 sid; /* source FCID */ + u32 did; /* destination FCID */ + u32 esb_stat; /* exchange status for ESB */ + u32 r_a_tov; /* r_a_tov from rport (msec) */ + u8 seq_id; /* next sequence ID to use */ + u32 f_ctl; /* F_CTL flags for sequences */ + u8 fh_type; /* frame type */ + enum fc_class class; /* class of service */ + struct fc_seq seq; /* single sequence */ + /* + * Handler for responses to this current exchange. + */ + void (*resp)(struct fc_seq *, struct fc_frame *, void *); + void (*destructor)(struct fc_seq *, void *); + /* + * arg is passed as void pointer to exchange + * resp and destructor handlers + */ + void *arg; +}; +#define fc_seq_exch(sp) container_of(sp, struct fc_exch, seq) + +struct libfc_function_template { + + /** + * Mandatory Fields + * + * These handlers must be implemented by the LLD. + */ + + /* + * Interface to send a FC frame + */ + int (*frame_send)(struct fc_lport *lp, struct fc_frame *fp); + + /** + * Optional Fields + * + * The LLD may choose to implement any of the following handlers. + * If LLD doesn't specify hander and leaves its pointer NULL then + * the default libfc function will be used for that handler. + */ + + /** + * ELS/CT interfaces + */ + + /* + * elsct_send - sends ELS/CT frame + */ + struct fc_seq *(*elsct_send)(struct fc_lport *lport, + struct fc_rport *rport, + struct fc_frame *fp, + unsigned int op, + void (*resp)(struct fc_seq *, + struct fc_frame *fp, + void *arg), + void *arg, u32 timer_msec); + /** + * Exhance Manager interfaces + */ + + /* + * Send the FC frame payload using a new exchange and sequence. + * + * The frame pointer with some of the header's fields must be + * filled before calling exch_seq_send(), those fields are, + * + * - routing control + * - FC port did + * - FC port sid + * - FC header type + * - frame control + * - parameter or relative offset + * + * The exchange response handler is set in this routine to resp() + * function pointer. It can be called in two scenarios: if a timeout + * occurs or if a response frame is received for the exchange. The + * fc_frame pointer in response handler will also indicate timeout + * as error using IS_ERR related macros. + * + * The exchange destructor handler is also set in this routine. + * The destructor handler is invoked by EM layer when exchange + * is about to free, this can be used by caller to free its + * resources along with exchange free. + * + * The arg is passed back to resp and destructor handler. + * + * The timeout value (in msec) for an exchange is set if non zero + * timer_msec argument is specified. The timer is canceled when + * it fires or when the exchange is done. The exchange timeout handler + * is registered by EM layer. + */ + struct fc_seq *(*exch_seq_send)(struct fc_lport *lp, + struct fc_frame *fp, + void (*resp)(struct fc_seq *sp, + struct fc_frame *fp, + void *arg), + void (*destructor)(struct fc_seq *sp, + void *arg), + void *arg, unsigned int timer_msec); + + /* + * send a frame using existing sequence and exchange. + */ + int (*seq_send)(struct fc_lport *lp, struct fc_seq *sp, + struct fc_frame *fp); + + /* + * Send ELS response using mainly infomation + * in exchange and sequence in EM layer. + */ + void (*seq_els_rsp_send)(struct fc_seq *sp, enum fc_els_cmd els_cmd, + struct fc_seq_els_data *els_data); + + /* + * Abort an exchange and sequence. Generally called because of a + * exchange timeout or an abort from the upper layer. + * + * A timer_msec can be specified for abort timeout, if non-zero + * timer_msec value is specified then exchange resp handler + * will be called with timeout error if no response to abort. + */ + int (*seq_exch_abort)(const struct fc_seq *req_sp, + unsigned int timer_msec); + + /* + * Indicate that an exchange/sequence tuple is complete and the memory + * allocated for the related objects may be freed. + */ + void (*exch_done)(struct fc_seq *sp); + + /* + * Assigns a EM and a free XID for an new exchange and then + * allocates a new exchange and sequence pair. + * The fp can be used to determine free XID. + */ + struct fc_exch *(*exch_get)(struct fc_lport *lp, struct fc_frame *fp); + + /* + * Release previously assigned XID by exch_get API. + * The LLD may implement this if XID is assigned by LLD + * in exch_get(). + */ + void (*exch_put)(struct fc_lport *lp, struct fc_exch_mgr *mp, + u16 ex_id); + + /* + * Start a new sequence on the same exchange/sequence tuple. + */ + struct fc_seq *(*seq_start_next)(struct fc_seq *sp); + + /* + * Reset an exchange manager, completing all sequences and exchanges. + * If s_id is non-zero, reset only exchanges originating from that FID. + * If d_id is non-zero, reset only exchanges sending to that FID. + */ + void (*exch_mgr_reset)(struct fc_exch_mgr *, + u32 s_id, u32 d_id); + + void (*rport_flush_queue)(void); + /** + * Local Port interfaces + */ + + /* + * Receive a frame to a local port. + */ + void (*lport_recv)(struct fc_lport *lp, struct fc_seq *sp, + struct fc_frame *fp); + + int (*lport_reset)(struct fc_lport *); + + /** + * Remote Port interfaces + */ + + /* + * Initiates the RP state machine. It is called from the LP module. + * This function will issue the following commands to the N_Port + * identified by the FC ID provided. + * + * - PLOGI + * - PRLI + * - RTV + */ + int (*rport_login)(struct fc_rport *rport); + + /* + * Logoff, and remove the rport from the transport if + * it had been added. This will send a LOGO to the target. + */ + int (*rport_logoff)(struct fc_rport *rport); + + /* + * Recieve a request from a remote port. + */ + void (*rport_recv_req)(struct fc_seq *, struct fc_frame *, + struct fc_rport *); + + struct fc_rport *(*rport_lookup)(const struct fc_lport *, u32); + + /** + * FCP interfaces + */ + + /* + * Send a fcp cmd from fsp pkt. + * Called with the SCSI host lock unlocked and irqs disabled. + * + * The resp handler is called when FCP_RSP received. + * + */ + int (*fcp_cmd_send)(struct fc_lport *lp, struct fc_fcp_pkt *fsp, + void (*resp)(struct fc_seq *, struct fc_frame *fp, + void *arg)); + + /* + * Used at least durring linkdown and reset + */ + void (*fcp_cleanup)(struct fc_lport *lp); + + /* + * Abort all I/O on a local port + */ + void (*fcp_abort_io)(struct fc_lport *lp); + + /** + * Discovery interfaces + */ + + void (*disc_recv_req)(struct fc_seq *, + struct fc_frame *, struct fc_lport *); + + /* + * Start discovery for a local port. + */ + void (*disc_start)(void (*disc_callback)(struct fc_lport *, + enum fc_disc_event), + struct fc_lport *); + + /* + * Stop discovery for a given lport. This will remove + * all discovered rports + */ + void (*disc_stop) (struct fc_lport *); + + /* + * Stop discovery for a given lport. This will block + * until all discovered rports are deleted from the + * FC transport class + */ + void (*disc_stop_final) (struct fc_lport *); +}; + +/* information used by the discovery layer */ +struct fc_disc { + unsigned char retry_count; + unsigned char delay; + unsigned char pending; + unsigned char requested; + unsigned short seq_count; + unsigned char buf_len; + enum fc_disc_event event; + + void (*disc_callback)(struct fc_lport *, + enum fc_disc_event); + + struct list_head rports; + struct fc_lport *lport; + struct mutex disc_mutex; + struct fc_gpn_ft_resp partial_buf; /* partial name buffer */ + struct delayed_work disc_work; +}; + +struct fc_lport { + struct list_head list; + + /* Associations */ + struct Scsi_Host *host; + struct fc_exch_mgr *emp; + struct fc_rport *dns_rp; + struct fc_rport *ptp_rp; + void *scsi_priv; + struct fc_disc disc; + + /* Operational Information */ + struct libfc_function_template tt; + u16 link_status; + enum fc_lport_state state; + unsigned long boot_time; + + struct fc_host_statistics host_stats; + struct fcoe_dev_stats *dev_stats[NR_CPUS]; + u64 wwpn; + u64 wwnn; + u8 retry_count; + + /* Capabilities */ + u32 sg_supp:1; /* scatter gather supported */ + u32 seq_offload:1; /* seq offload supported */ + u32 crc_offload:1; /* crc offload supported */ + u32 lro_enabled:1; /* large receive offload */ + u32 mfs; /* max FC payload size */ + unsigned int service_params; + unsigned int e_d_tov; + unsigned int r_a_tov; + u8 max_retry_count; + u16 link_speed; + u16 link_supported_speeds; + u16 lro_xid; /* max xid for fcoe lro */ + struct fc_ns_fts fcts; /* FC-4 type masks */ + struct fc_els_rnid_gen rnid_gen; /* RNID information */ + + /* Semaphores */ + struct mutex lp_mutex; + + /* Miscellaneous */ + struct delayed_work retry_work; + struct delayed_work disc_work; +}; + +/** + * FC_LPORT HELPER FUNCTIONS + *****************************/ +static inline void *lport_priv(const struct fc_lport *lp) +{ + return (void *)(lp + 1); +} + +static inline int fc_lport_test_ready(struct fc_lport *lp) +{ + return lp->state == LPORT_ST_READY; +} + +static inline void fc_set_wwnn(struct fc_lport *lp, u64 wwnn) +{ + lp->wwnn = wwnn; +} + +static inline void fc_set_wwpn(struct fc_lport *lp, u64 wwnn) +{ + lp->wwpn = wwnn; +} + +static inline void fc_lport_state_enter(struct fc_lport *lp, + enum fc_lport_state state) +{ + if (state != lp->state) + lp->retry_count = 0; + lp->state = state; +} + + +/** + * LOCAL PORT LAYER + *****************************/ +int fc_lport_init(struct fc_lport *lp); + +/* + * Destroy the specified local port by finding and freeing all + * fc_rports associated with it and then by freeing the fc_lport + * itself. + */ +int fc_lport_destroy(struct fc_lport *lp); + +/* + * Logout the specified local port from the fabric + */ +int fc_fabric_logoff(struct fc_lport *lp); + +/* + * Initiate the LP state machine. This handler will use fc_host_attr + * to store the FLOGI service parameters, so fc_host_attr must be + * initialized before calling this handler. + */ +int fc_fabric_login(struct fc_lport *lp); + +/* + * The link is up for the given local port. + */ +void fc_linkup(struct fc_lport *); + +/* + * Link is down for the given local port. + */ +void fc_linkdown(struct fc_lport *); + +/* + * Pause and unpause traffic. + */ +void fc_pause(struct fc_lport *); +void fc_unpause(struct fc_lport *); + +/* + * Configure the local port. + */ +int fc_lport_config(struct fc_lport *); + +/* + * Reset the local port. + */ +int fc_lport_reset(struct fc_lport *); + +/* + * Set the mfs or reset + */ +int fc_set_mfs(struct fc_lport *lp, u32 mfs); + + +/** + * REMOTE PORT LAYER + *****************************/ +int fc_rport_init(struct fc_lport *lp); +void fc_rport_terminate_io(struct fc_rport *rp); + +/** + * DISCOVERY LAYER + *****************************/ +int fc_disc_init(struct fc_lport *lp); + + +/** + * SCSI LAYER + *****************************/ +/* + * Initialize the SCSI block of libfc + */ +int fc_fcp_init(struct fc_lport *); + +/* + * This section provides an API which allows direct interaction + * with the SCSI-ml. Each of these functions satisfies a function + * pointer defined in Scsi_Host and therefore is always called + * directly from the SCSI-ml. + */ +int fc_queuecommand(struct scsi_cmnd *sc_cmd, + void (*done)(struct scsi_cmnd *)); + +/* + * complete processing of a fcp packet + * + * This function may sleep if a fsp timer is pending. + * The host lock must not be held by caller. + */ +void fc_fcp_complete(struct fc_fcp_pkt *fsp); + +/* + * Send an ABTS frame to the target device. The sc_cmd argument + * is a pointer to the SCSI command to be aborted. + */ +int fc_eh_abort(struct scsi_cmnd *sc_cmd); + +/* + * Reset a LUN by sending send the tm cmd to the target. + */ +int fc_eh_device_reset(struct scsi_cmnd *sc_cmd); + +/* + * Reset the host adapter. + */ +int fc_eh_host_reset(struct scsi_cmnd *sc_cmd); + +/* + * Check rport status. + */ +int fc_slave_alloc(struct scsi_device *sdev); + +/* + * Adjust the queue depth. + */ +int fc_change_queue_depth(struct scsi_device *sdev, int qdepth); + +/* + * Change the tag type. + */ +int fc_change_queue_type(struct scsi_device *sdev, int tag_type); + +/* + * Free memory pools used by the FCP layer. + */ +void fc_fcp_destroy(struct fc_lport *); + +/** + * ELS/CT interface + *****************************/ +/* + * Initializes ELS/CT interface + */ +int fc_elsct_init(struct fc_lport *lp); + + +/** + * EXCHANGE MANAGER LAYER + *****************************/ +/* + * Initializes Exchange Manager related + * function pointers in struct libfc_function_template. + */ +int fc_exch_init(struct fc_lport *lp); + +/* + * Allocates an Exchange Manager (EM). + * + * The EM manages exchanges for their allocation and + * free, also allows exchange lookup for received + * frame. + * + * The class is used for initializing FC class of + * allocated exchange from EM. + * + * The min_xid and max_xid will limit new + * exchange ID (XID) within this range for + * a new exchange. + * The LLD may choose to have multiple EMs, + * e.g. one EM instance per CPU receive thread in LLD. + * The LLD can use exch_get() of struct libfc_function_template + * to specify XID for a new exchange within + * a specified EM instance. + * + * The em_idx to uniquely identify an EM instance. + */ +struct fc_exch_mgr *fc_exch_mgr_alloc(struct fc_lport *lp, + enum fc_class class, + u16 min_xid, + u16 max_xid); + +/* + * Free an exchange manager. + */ +void fc_exch_mgr_free(struct fc_exch_mgr *mp); + +/* + * Receive a frame on specified local port and exchange manager. + */ +void fc_exch_recv(struct fc_lport *lp, struct fc_exch_mgr *mp, + struct fc_frame *fp); + +/* + * This function is for exch_seq_send function pointer in + * struct libfc_function_template, see comment block on + * exch_seq_send for description of this function. + */ +struct fc_seq *fc_exch_seq_send(struct fc_lport *lp, + struct fc_frame *fp, + void (*resp)(struct fc_seq *sp, + struct fc_frame *fp, + void *arg), + void (*destructor)(struct fc_seq *sp, + void *arg), + void *arg, u32 timer_msec); + +/* + * send a frame using existing sequence and exchange. + */ +int fc_seq_send(struct fc_lport *lp, struct fc_seq *sp, struct fc_frame *fp); + +/* + * Send ELS response using mainly infomation + * in exchange and sequence in EM layer. + */ +void fc_seq_els_rsp_send(struct fc_seq *sp, enum fc_els_cmd els_cmd, + struct fc_seq_els_data *els_data); + +/* + * This function is for seq_exch_abort function pointer in + * struct libfc_function_template, see comment block on + * seq_exch_abort for description of this function. + */ +int fc_seq_exch_abort(const struct fc_seq *req_sp, unsigned int timer_msec); + +/* + * Indicate that an exchange/sequence tuple is complete and the memory + * allocated for the related objects may be freed. + */ +void fc_exch_done(struct fc_seq *sp); + +/* + * Assigns a EM and XID for a frame and then allocates + * a new exchange and sequence pair. + * The fp can be used to determine free XID. + */ +struct fc_exch *fc_exch_get(struct fc_lport *lp, struct fc_frame *fp); + +/* + * Allocate a new exchange and sequence pair. + * if ex_id is zero then next free exchange id + * from specified exchange manger mp will be assigned. + */ +struct fc_exch *fc_exch_alloc(struct fc_exch_mgr *mp, + struct fc_frame *fp, u16 ex_id); +/* + * Start a new sequence on the same exchange as the supplied sequence. + */ +struct fc_seq *fc_seq_start_next(struct fc_seq *sp); + +/* + * Reset an exchange manager, completing all sequences and exchanges. + * If s_id is non-zero, reset only exchanges originating from that FID. + * If d_id is non-zero, reset only exchanges sending to that FID. + */ +void fc_exch_mgr_reset(struct fc_exch_mgr *, u32 s_id, u32 d_id); + +/* + * Functions for fc_functions_template + */ +void fc_get_host_speed(struct Scsi_Host *shost); +void fc_get_host_port_type(struct Scsi_Host *shost); +void fc_get_host_port_state(struct Scsi_Host *shost); +void fc_set_rport_loss_tmo(struct fc_rport *rport, u32 timeout); +struct fc_host_statistics *fc_get_host_stats(struct Scsi_Host *); + +/* + * module setup functions. + */ +int fc_setup_exch_mgr(void); +void fc_destroy_exch_mgr(void); +int fc_setup_rport(void); +void fc_destroy_rport(void); + +#endif /* _LIBFC_H_ */ |