diff options
| -rw-r--r-- | drivers/ata/pata_sis.c | 20 |
1 files changed, 9 insertions, 11 deletions
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index 9a829a7..66bd0e8 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -2,6 +2,7 @@ * pata_sis.c - SiS ATA driver * * (C) 2005 Red Hat <alan@redhat.com> + * (C) 2007 Bartlomiej Zolnierkiewicz * * Based upon linux/drivers/ide/pci/sis5513.c * Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org> @@ -35,7 +36,7 @@ #include "sis.h" #define DRV_NAME "pata_sis" -#define DRV_VERSION "0.5.1" +#define DRV_VERSION "0.5.2" struct sis_chipset { u16 device; /* PCI host ID */ @@ -237,7 +238,7 @@ static void sis_old_set_piomode (struct ata_port *ap, struct ata_device *adev) } /** - * sis_100_set_pioode - Initialize host controller PATA PIO timings + * sis_100_set_piomode - Initialize host controller PATA PIO timings * @ap: Port whose timings we are configuring * @adev: Device we are configuring for. * @@ -262,7 +263,7 @@ static void sis_100_set_piomode (struct ata_port *ap, struct ata_device *adev) } /** - * sis_133_set_pioode - Initialize host controller PATA PIO timings + * sis_133_set_piomode - Initialize host controller PATA PIO timings * @ap: Port whose timings we are configuring * @adev: Device we are configuring for. * @@ -334,7 +335,7 @@ static void sis_old_set_dmamode (struct ata_port *ap, struct ata_device *adev) int drive_pci = sis_old_port_base(adev); u16 timing; - const u16 mwdma_bits[] = { 0x707, 0x202, 0x202 }; + const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 }; const u16 udma_bits[] = { 0xE000, 0xC000, 0xA000 }; pci_read_config_word(pdev, drive_pci, &timing); @@ -342,15 +343,15 @@ static void sis_old_set_dmamode (struct ata_port *ap, struct ata_device *adev) if (adev->dma_mode < XFER_UDMA_0) { /* bits 3-0 hold recovery timing bits 8-10 active timing and the higer bits are dependant on the device */ - timing &= ~ 0x870F; + timing &= ~0x870F; timing |= mwdma_bits[speed]; - pci_write_config_word(pdev, drive_pci, timing); } else { /* Bit 15 is UDMA on/off, bit 13-14 are cycle time */ speed = adev->dma_mode - XFER_UDMA_0; timing &= ~0x6000; timing |= udma_bits[speed]; } + pci_write_config_word(pdev, drive_pci, timing); } /** @@ -373,7 +374,7 @@ static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev) int drive_pci = sis_old_port_base(adev); u16 timing; - const u16 mwdma_bits[] = { 0x707, 0x202, 0x202 }; + const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 }; const u16 udma_bits[] = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000}; pci_read_config_word(pdev, drive_pci, &timing); @@ -432,8 +433,7 @@ static void sis_100_set_dmamode (struct ata_port *ap, struct ata_device *adev) * @adev: Device to program * * Set UDMA/MWDMA mode for device, in host controller PCI config space. - * Handles early SiS 961 bridges. Supports MWDMA as well unlike - * the old ide/pci driver. + * Handles early SiS 961 bridges. * * LOCKING: * None (inherited from caller). @@ -467,8 +467,6 @@ static void sis_133_early_set_dmamode (struct ata_port *ap, struct ata_device *a * @adev: Device to program * * Set UDMA/MWDMA mode for device, in host controller PCI config space. - * Handles early SiS 961 bridges. Supports MWDMA as well unlike - * the old ide/pci driver. * * LOCKING: * None (inherited from caller). |