aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/networking/phy.txt13
-rw-r--r--drivers/net/au1000_eth.c3
-rw-r--r--drivers/net/fs_enet/fs_enet-main.c3
-rw-r--r--drivers/net/gianfar.c39
-rw-r--r--drivers/net/gianfar.h3
-rw-r--r--drivers/net/phy/phy_device.c29
-rw-r--r--include/linux/phy.h26
7 files changed, 93 insertions, 23 deletions
diff --git a/Documentation/networking/phy.txt b/Documentation/networking/phy.txt
index 29ccae4..0bc95ea 100644
--- a/Documentation/networking/phy.txt
+++ b/Documentation/networking/phy.txt
@@ -1,7 +1,7 @@
-------
PHY Abstraction Layer
-(Updated 2005-07-21)
+(Updated 2006-11-30)
Purpose
@@ -97,11 +97,12 @@ Letting the PHY Abstraction Layer do Everything
Next, you need to know the device name of the PHY connected to this device.
The name will look something like, "phy0:0", where the first number is the
- bus id, and the second is the PHY's address on that bus.
+ bus id, and the second is the PHY's address on that bus. Typically,
+ the bus is responsible for making its ID unique.
Now, to connect, just call this function:
- phydev = phy_connect(dev, phy_name, &adjust_link, flags);
+ phydev = phy_connect(dev, phy_name, &adjust_link, flags, interface);
phydev is a pointer to the phy_device structure which represents the PHY. If
phy_connect is successful, it will return the pointer. dev, here, is the
@@ -115,6 +116,10 @@ Letting the PHY Abstraction Layer do Everything
This is useful if the system has put hardware restrictions on
the PHY/controller, of which the PHY needs to be aware.
+ interface is a u32 which specifies the connection type used
+ between the controller and the PHY. Examples are GMII, MII,
+ RGMII, and SGMII. For a full list, see include/linux/phy.h
+
Now just make sure that phydev->supported and phydev->advertising have any
values pruned from them which don't make sense for your controller (a 10/100
controller may be connected to a gigabit capable PHY, so you would need to
@@ -191,7 +196,7 @@ Doing it all yourself
start, or disables then frees them for stop.
struct phy_device * phy_attach(struct net_device *dev, const char *phy_id,
- u32 flags);
+ u32 flags, phy_interface_t interface);
Attaches a network device to a particular PHY, binding the PHY to a generic
driver if none was found during bus initialization. Passes in
diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index 7db3c8a..f0b6879 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -360,7 +360,8 @@ static int mii_probe (struct net_device *dev)
BUG_ON(!phydev);
BUG_ON(phydev->attached_dev);
- phydev = phy_connect(dev, phydev->dev.bus_id, &au1000_adjust_link, 0);
+ phydev = phy_connect(dev, phydev->dev.bus_id, &au1000_adjust_link, 0,
+ PHY_INTERFACE_MODE_MII);
if (IS_ERR(phydev)) {
printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
index cb39587..889d3a1 100644
--- a/drivers/net/fs_enet/fs_enet-main.c
+++ b/drivers/net/fs_enet/fs_enet-main.c
@@ -779,7 +779,8 @@ static int fs_init_phy(struct net_device *dev)
fep->oldspeed = 0;
fep->oldduplex = -1;
if(fep->fpi->bus_id)
- phydev = phy_connect(dev, fep->fpi->bus_id, &fs_adjust_link, 0);
+ phydev = phy_connect(dev, fep->fpi->bus_id, &fs_adjust_link, 0,
+ PHY_INTERFACE_MODE_MII);
else {
printk("No phy bus ID specified in BSP code\n");
return -EINVAL;
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 6bf18c8..baa3514 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -9,7 +9,7 @@
* Author: Andy Fleming
* Maintainer: Kumar Gala
*
- * Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
+ * Copyright (c) 2002-2006 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -398,6 +398,38 @@ static int gfar_remove(struct platform_device *pdev)
}
+/* Reads the controller's registers to determine what interface
+ * connects it to the PHY.
+ */
+static phy_interface_t gfar_get_interface(struct net_device *dev)
+{
+ struct gfar_private *priv = netdev_priv(dev);
+ u32 ecntrl = gfar_read(&priv->regs->ecntrl);
+
+ if (ecntrl & ECNTRL_SGMII_MODE)
+ return PHY_INTERFACE_MODE_SGMII;
+
+ if (ecntrl & ECNTRL_TBI_MODE) {
+ if (ecntrl & ECNTRL_REDUCED_MODE)
+ return PHY_INTERFACE_MODE_RTBI;
+ else
+ return PHY_INTERFACE_MODE_TBI;
+ }
+
+ if (ecntrl & ECNTRL_REDUCED_MODE) {
+ if (ecntrl & ECNTRL_REDUCED_MII_MODE)
+ return PHY_INTERFACE_MODE_RMII;
+ else
+ return PHY_INTERFACE_MODE_RGMII;
+ }
+
+ if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT)
+ return PHY_INTERFACE_MODE_GMII;
+
+ return PHY_INTERFACE_MODE_MII;
+}
+
+
/* Initializes driver's PHY state, and attaches to the PHY.
* Returns 0 on success.
*/
@@ -409,6 +441,7 @@ static int init_phy(struct net_device *dev)
SUPPORTED_1000baseT_Full : 0;
struct phy_device *phydev;
char phy_id[BUS_ID_SIZE];
+ phy_interface_t interface;
priv->oldlink = 0;
priv->oldspeed = 0;
@@ -416,7 +449,9 @@ static int init_phy(struct net_device *dev)
snprintf(phy_id, BUS_ID_SIZE, PHY_ID_FMT, priv->einfo->bus_id, priv->einfo->phy_id);
- phydev = phy_connect(dev, phy_id, &adjust_link, 0);
+ interface = gfar_get_interface(dev);
+
+ phydev = phy_connect(dev, phy_id, &adjust_link, 0, interface);
if (IS_ERR(phydev)) {
printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h
index 9e81a50..39e9e32 100644
--- a/drivers/net/gianfar.h
+++ b/drivers/net/gianfar.h
@@ -160,7 +160,10 @@ extern const char gfar_driver_version[];
#define ECNTRL_INIT_SETTINGS 0x00001000
#define ECNTRL_TBI_MODE 0x00000020
+#define ECNTRL_REDUCED_MODE 0x00000010
#define ECNTRL_R100 0x00000008
+#define ECNTRL_REDUCED_MII_MODE 0x00000004
+#define ECNTRL_SGMII_MODE 0x00000002
#define MRBLR_INIT_SETTINGS DEFAULT_RX_BUFFER_SIZE
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 2a08b2b..b01fc70 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -59,6 +59,7 @@ struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id)
dev->duplex = -1;
dev->pause = dev->asym_pause = 0;
dev->link = 1;
+ dev->interface = PHY_INTERFACE_MODE_GMII;
dev->autoneg = AUTONEG_ENABLE;
@@ -137,11 +138,12 @@ void phy_prepare_link(struct phy_device *phydev,
* the desired functionality.
*/
struct phy_device * phy_connect(struct net_device *dev, const char *phy_id,
- void (*handler)(struct net_device *), u32 flags)
+ void (*handler)(struct net_device *), u32 flags,
+ u32 interface)
{
struct phy_device *phydev;
- phydev = phy_attach(dev, phy_id, flags);
+ phydev = phy_attach(dev, phy_id, flags, interface);
if (IS_ERR(phydev))
return phydev;
@@ -186,7 +188,7 @@ static int phy_compare_id(struct device *dev, void *data)
}
struct phy_device *phy_attach(struct net_device *dev,
- const char *phy_id, u32 flags)
+ const char *phy_id, u32 flags, u32 interface)
{
struct bus_type *bus = &mdio_bus_type;
struct phy_device *phydev;
@@ -231,6 +233,20 @@ struct phy_device *phy_attach(struct net_device *dev,
phydev->dev_flags = flags;
+ phydev->interface = interface;
+
+ /* Do initial configuration here, now that
+ * we have certain key parameters
+ * (dev_flags and interface) */
+ if (phydev->drv->config_init) {
+ int err;
+
+ err = phydev->drv->config_init(phydev);
+
+ if (err < 0)
+ return ERR_PTR(err);
+ }
+
return phydev;
}
EXPORT_SYMBOL(phy_attach);
@@ -612,13 +628,8 @@ static int phy_probe(struct device *dev)
spin_unlock(&phydev->lock);
- if (err < 0)
- return err;
-
- if (phydev->drv->config_init)
- err = phydev->drv->config_init(phydev);
-
return err;
+
}
static int phy_remove(struct device *dev)
diff --git a/include/linux/phy.h b/include/linux/phy.h
index ce8bc80..edd4c88 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -47,15 +47,26 @@
#define PHY_HAS_INTERRUPT 0x00000001
#define PHY_HAS_MAGICANEG 0x00000002
+/* Interface Mode definitions */
+typedef enum {
+ PHY_INTERFACE_MODE_MII,
+ PHY_INTERFACE_MODE_GMII,
+ PHY_INTERFACE_MODE_SGMII,
+ PHY_INTERFACE_MODE_TBI,
+ PHY_INTERFACE_MODE_RMII,
+ PHY_INTERFACE_MODE_RGMII,
+ PHY_INTERFACE_MODE_RTBI
+} phy_interface_t;
+
#define MII_BUS_MAX 4
-#define PHY_INIT_TIMEOUT 100000
+#define PHY_INIT_TIMEOUT 100000
#define PHY_STATE_TIME 1
#define PHY_FORCE_TIMEOUT 10
#define PHY_AN_TIMEOUT 10
-#define PHY_MAX_ADDR 32
+#define PHY_MAX_ADDR 32
/* Used when trying to connect to a specific phy (mii bus id:phy device id) */
#define PHY_ID_FMT "%x:%02x"
@@ -87,8 +98,8 @@ struct mii_bus {
int *irq;
};
-#define PHY_INTERRUPT_DISABLED 0x0
-#define PHY_INTERRUPT_ENABLED 0x80000000
+#define PHY_INTERRUPT_DISABLED 0x0
+#define PHY_INTERRUPT_ENABLED 0x80000000
/* PHY state machine states:
*
@@ -230,6 +241,8 @@ struct phy_device {
u32 dev_flags;
+ phy_interface_t interface;
+
/* Bus address of the PHY (0-32) */
int addr;
@@ -345,9 +358,10 @@ struct phy_device* get_phy_device(struct mii_bus *bus, int addr);
int phy_clear_interrupt(struct phy_device *phydev);
int phy_config_interrupt(struct phy_device *phydev, u32 interrupts);
struct phy_device * phy_attach(struct net_device *dev,
- const char *phy_id, u32 flags);
+ const char *phy_id, u32 flags, phy_interface_t interface);
struct phy_device * phy_connect(struct net_device *dev, const char *phy_id,
- void (*handler)(struct net_device *), u32 flags);
+ void (*handler)(struct net_device *), u32 flags,
+ phy_interface_t interface);
void phy_disconnect(struct phy_device *phydev);
void phy_detach(struct phy_device *phydev);
void phy_start(struct phy_device *phydev);