aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/w1/masters/ds249018
-rw-r--r--Documentation/w1/w1.generic18
-rw-r--r--Documentation/w1/w1.netlink98
-rw-r--r--drivers/w1/Kconfig14
-rw-r--r--drivers/w1/Makefile4
-rw-r--r--drivers/w1/masters/Kconfig27
-rw-r--r--drivers/w1/masters/Makefile7
-rw-r--r--drivers/w1/masters/ds2482.c24
-rw-r--r--drivers/w1/masters/ds2490.c (renamed from drivers/w1/masters/dscore.c)434
-rw-r--r--drivers/w1/masters/ds_w1_bridge.c174
-rw-r--r--drivers/w1/masters/dscore.h166
-rw-r--r--drivers/w1/slaves/Kconfig2
-rw-r--r--drivers/w1/slaves/w1_ds2433.c21
-rw-r--r--drivers/w1/slaves/w1_smem.c1
-rw-r--r--drivers/w1/slaves/w1_therm.c13
-rw-r--r--drivers/w1/w1.c263
-rw-r--r--drivers/w1/w1.h41
-rw-r--r--drivers/w1/w1_family.c18
-rw-r--r--drivers/w1/w1_family.h3
-rw-r--r--drivers/w1/w1_int.c16
-rw-r--r--drivers/w1/w1_io.c31
-rw-r--r--drivers/w1/w1_io.h3
-rw-r--r--drivers/w1/w1_netlink.c219
-rw-r--r--drivers/w1/w1_netlink.h35
-rw-r--r--include/linux/connector.h5
-rw-r--r--include/linux/netlink.h2
26 files changed, 909 insertions, 748 deletions
diff --git a/Documentation/w1/masters/ds2490 b/Documentation/w1/masters/ds2490
new file mode 100644
index 0000000..44a4918
--- /dev/null
+++ b/Documentation/w1/masters/ds2490
@@ -0,0 +1,18 @@
+Kernel driver ds2490
+====================
+
+Supported chips:
+ * Maxim DS2490 based
+
+Author: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+
+
+Description
+-----------
+
+The Maixm/Dallas Semiconductor DS2490 is a chip
+which allows to build USB <-> W1 bridges.
+
+DS9490(R) is a USB <-> W1 bus master device
+which has 0x81 family ID integrated chip and DS2490
+low-level operational chip.
diff --git a/Documentation/w1/w1.generic b/Documentation/w1/w1.generic
index f937fbe..4c6509d 100644
--- a/Documentation/w1/w1.generic
+++ b/Documentation/w1/w1.generic
@@ -27,8 +27,19 @@ When a w1 master driver registers with the w1 subsystem, the following occurs:
When a device is found on the bus, w1 core checks if driver for it's family is
loaded. If so, the family driver is attached to the slave.
-If there is no driver for the family, a simple sysfs entry is created
-for the slave device.
+If there is no driver for the family, default one is assigned, which allows to perform
+almost any kind of operations. Each logical operation is a transaction
+in nature, which can contain several (two or one) low-level operations.
+Let's see how one can read EEPROM context:
+1. one must write control buffer, i.e. buffer containing command byte
+and two byte address. At this step bus is reset and appropriate device
+is selected using either W1_SKIP_ROM or W1_MATCH_ROM command.
+Then provided control buffer is being written to the wire.
+2. reading. This will issue reading eeprom response.
+
+It is possible that between 1. and 2. w1 master thread will reset bus for searching
+and slave device will be even removed, but in this case 0xff will
+be read, since no device was selected.
W1 device families
@@ -89,4 +100,5 @@ driver - (standard) symlink to the w1 driver
name - the device name, usually the same as the directory name
w1_slave - (optional) a binary file whose meaning depends on the
family driver
-
+rw - (optional) created for slave devices which do not have
+ appropriate family driver. Allows to read/write binary data.
diff --git a/Documentation/w1/w1.netlink b/Documentation/w1/w1.netlink
new file mode 100644
index 0000000..3640c7c
--- /dev/null
+++ b/Documentation/w1/w1.netlink
@@ -0,0 +1,98 @@
+Userspace communication protocol over connector [1].
+
+
+Message types.
+=============
+
+There are three types of messages between w1 core and userspace:
+1. Events. They are generated each time new master or slave device found
+ either due to automatic or requested search.
+2. Userspace commands. Includes read/write and search/alarm search comamnds.
+3. Replies to userspace commands.
+
+
+Protocol.
+========
+
+[struct cn_msg] - connector header. It's length field is equal to size of the attached data.
+[struct w1_netlink_msg] - w1 netlink header.
+ __u8 type - message type.
+ W1_SLAVE_ADD/W1_SLAVE_REMOVE - slave add/remove events.
+ W1_MASTER_ADD/W1_MASTER_REMOVE - master add/remove events.
+ W1_MASTER_CMD - userspace command for bus master device (search/alarm search).
+ W1_SLAVE_CMD - userspace command for slave device (read/write/ search/alarm search
+ for bus master device where given slave device found).
+ __u8 res - reserved
+ __u16 len - size of attached to this header data.
+ union {
+ __u8 id; - slave unique device id
+ struct w1_mst {
+ __u32 id; - master's id.
+ __u32 res; - reserved
+ } mst;
+ } id;
+
+[strucrt w1_netlink_cmd] - command for gived master or slave device.
+ __u8 cmd - command opcode.
+ W1_CMD_READ - read command.
+ W1_CMD_WRITE - write command.
+ W1_CMD_SEARCH - search command.
+ W1_CMD_ALARM_SEARCH - alarm search command.
+ __u8 res - reserved
+ __u16 len - length of data for this command.
+ For read command data must be allocated like for write command.
+ __u8 data[0] - data for this command.
+
+
+Each connector message can include one or more w1_netlink_msg with zero of more attached w1_netlink_cmd messages.
+
+For event messages there are no w1_netlink_cmd embedded structures, only connector header
+and w1_netlink_msg strucutre with "len" field being zero and filled type (one of event types)
+and id - either 8 bytes of slave unique id in host order, or master's id, which is assigned
+to bus master device when it is added to w1 core.
+
+Currently replies to userspace commands are only generated for read command request.
+One reply is generated exactly for one w1_netlink_cmd read request.
+Replies are not combined when sent - i.e. typical reply messages looks like the following:
+[cn_msg][w1_netlink_msg][w1_netlink_cmd]
+cn_msg.len = sizeof(struct w1_netlink_msg) + sizeof(struct w1_netlink_cmd) + cmd->len;
+w1_netlink_msg.len = sizeof(struct w1_netlink_cmd) + cmd->len;
+w1_netlink_cmd.len = cmd->len;
+
+
+Operation steps in w1 core when new command is received.
+=======================================================
+
+When new message (w1_netlink_msg) is received w1 core detects if it is master of slave request,
+according to w1_netlink_msg.type field.
+Then master or slave device is searched for.
+When found, master device (requested or those one on where slave device is found) is locked.
+If slave command is requested, then reset/select procedure is started to select given device.
+
+Then all requested in w1_netlink_msg operations are performed one by one.
+If command requires reply (like read command) it is sent on command completion.
+
+When all commands (w1_netlink_cmd) are processed muster device is unlocked
+and next w1_netlink_msg header processing started.
+
+
+Connector [1] specific documentation.
+====================================
+
+Each connector message includes two u32 fields as "address".
+w1 uses CN_W1_IDX and CN_W1_VAL defined in include/linux/connector.h header.
+Each message also includes sequence and acknowledge numbers.
+Sequence number for event messages is appropriate bus master sequence number increased with
+each event message sent "through" this master.
+Sequence number for userspace requests is set by userspace application.
+Sequence number for reply is the same as was in request, and
+acknowledge number is set to seq+1.
+
+
+Additional documantion, source code examples.
+============================================
+
+1. Documentation/connector
+2. http://tservice.net.ru/~s0mbre/archive/w1
+This archive includes userspace application w1d.c which
+uses read/write/search commands for all master/slave devices found on the bus.
diff --git a/drivers/w1/Kconfig b/drivers/w1/Kconfig
index 5e61ed5..f2d9a08 100644
--- a/drivers/w1/Kconfig
+++ b/drivers/w1/Kconfig
@@ -3,7 +3,7 @@ menu "Dallas's 1-wire bus"
config W1
tristate "Dallas's 1-wire support"
---help---
- Dallas's 1-wire bus is useful to connect slow 1-pin devices
+ Dallas' 1-wire bus is useful to connect slow 1-pin devices
such as iButtons and thermal sensors.
If you want W1 support, you should say Y here.
@@ -11,6 +11,18 @@ config W1
This W1 support can also be built as a module. If so, the module
will be called wire.ko.
+config W1_CON
+ depends on CONNECTOR && W1
+ bool "Userspace communication over connector"
+ default y
+ --- help ---
+ This allows to communicate with userspace using connector [Documentation/connector].
+ There are three types of messages between w1 core and userspace:
+ 1. Events. They are generated each time new master or slave device found
+ either due to automatic or requested search.
+ 2. Userspace commands. Includes read/write and search/alarm search comamnds.
+ 3. Replies to userspace commands.
+
source drivers/w1/masters/Kconfig
source drivers/w1/slaves/Kconfig
diff --git a/drivers/w1/Makefile b/drivers/w1/Makefile
index 0c2aa22..93845a2 100644
--- a/drivers/w1/Makefile
+++ b/drivers/w1/Makefile
@@ -2,10 +2,6 @@
# Makefile for the Dallas's 1-wire bus.
#
-ifneq ($(CONFIG_NET), y)
-EXTRA_CFLAGS += -DNETLINK_DISABLED
-endif
-
ifeq ($(CONFIG_W1_DS2433_CRC), y)
EXTRA_CFLAGS += -DCONFIG_W1_F23_CRC
endif
diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
index c6bad4d..2fb4255 100644
--- a/drivers/w1/masters/Kconfig
+++ b/drivers/w1/masters/Kconfig
@@ -15,24 +15,15 @@ config W1_MASTER_MATROX
This support is also available as a module. If so, the module
will be called matrox_w1.ko.
-config W1_MASTER_DS9490
- tristate "DS9490R transport layer driver"
- depends on W1 && USB
- help
- Say Y here if you want to have a driver for DS9490R UWB <-> W1 bridge.
-
- This support is also available as a module. If so, the module
- will be called ds9490r.ko.
-
-config W1_MASTER_DS9490_BRIDGE
- tristate "DS9490R USB <-> W1 transport layer for 1-wire"
- depends on W1_MASTER_DS9490
- help
- Say Y here if you want to communicate with your 1-wire devices
- using DS9490R USB bridge.
-
- This support is also available as a module. If so, the module
- will be called ds_w1_bridge.ko.
+config W1_MASTER_DS2490
+ tristate "DS2490 USB <-> W1 transport layer for 1-wire"
+ depends on W1 && USB
+ help
+ Say Y here if you want to have a driver for DS2490 based USB <-> W1 bridges,
+ for example DS9490*.
+
+ This support is also available as a module. If so, the module
+ will be called ds2490.ko.
config W1_MASTER_DS2482
tristate "Maxim DS2482 I2C to 1-Wire bridge"
diff --git a/drivers/w1/masters/Makefile b/drivers/w1/masters/Makefile
index 1f3c8b9..4cee256 100644
--- a/drivers/w1/masters/Makefile
+++ b/drivers/w1/masters/Makefile
@@ -3,11 +3,6 @@
#
obj-$(CONFIG_W1_MASTER_MATROX) += matrox_w1.o
-
-obj-$(CONFIG_W1_MASTER_DS9490) += ds9490r.o
-ds9490r-objs := dscore.o
-
-obj-$(CONFIG_W1_MASTER_DS9490_BRIDGE) += ds_w1_bridge.o
-
+obj-$(CONFIG_W1_MASTER_DS2490) += ds2490.o
obj-$(CONFIG_W1_MASTER_DS2482) += ds2482.o
diff --git a/drivers/w1/masters/ds2482.c b/drivers/w1/masters/ds2482.c
index d1cacd2..af492cc 100644
--- a/drivers/w1/masters/ds2482.c
+++ b/drivers/w1/masters/ds2482.c
@@ -125,7 +125,7 @@ struct ds2482_w1_chan {
struct ds2482_data {
struct i2c_client client;
- struct semaphore access_lock;
+ struct mutex access_lock;
/* 1-wire interface(s) */
int w1_count; /* 1 or 8 */
@@ -265,7 +265,7 @@ static u8 ds2482_w1_touch_bit(void *data, u8 bit)
struct ds2482_data *pdev = pchan->pdev;
int status = -1;
- down(&pdev->access_lock);
+ mutex_lock(&pdev->access_lock);
/* Select the channel */
ds2482_wait_1wire_idle(pdev);
@@ -277,7 +277,7 @@ static u8 ds2482_w1_touch_bit(void *data, u8 bit)
bit ? 0xFF : 0))
status = ds2482_wait_1wire_idle(pdev);
- up(&pdev->access_lock);
+ mutex_unlock(&pdev->access_lock);
return (status & DS2482_REG_STS_SBR) ? 1 : 0;
}
@@ -297,7 +297,7 @@ static u8 ds2482_w1_triplet(void *data, u8 dbit)
struct ds2482_data *pdev = pchan->pdev;
int status = (3 << 5);
- down(&pdev->access_lock);
+ mutex_lock(&pdev->access_lock);
/* Select the channel */
ds2482_wait_1wire_idle(pdev);
@@ -309,7 +309,7 @@ static u8 ds2482_w1_triplet(void *data, u8 dbit)
dbit ? 0xFF : 0))
status = ds2482_wait_1wire_idle(pdev);
- up(&pdev->access_lock);
+ mutex_unlock(&pdev->access_lock);
/* Decode the status */
return (status >> 5);
@@ -326,7 +326,7 @@ static void ds2482_w1_write_byte(void *data, u8 byte)
struct ds2482_w1_chan *pchan = data;
struct ds2482_data *pdev = pchan->pdev;
- down(&pdev->access_lock);
+ mutex_lock(&pdev->access_lock);
/* Select the channel */
ds2482_wait_1wire_idle(pdev);
@@ -336,7 +336,7 @@ static void ds2482_w1_write_byte(void *data, u8 byte)
/* Send the write byte command */
ds2482_send_cmd_data(pdev, DS2482_CMD_1WIRE_WRITE_BYTE, byte);
- up(&pdev->access_lock);
+ mutex_unlock(&pdev->access_lock);
}
/**
@@ -351,7 +351,7 @@ static u8 ds2482_w1_read_byte(void *data)
struct ds2482_data *pdev = pchan->pdev;
int result;
- down(&pdev->access_lock);
+ mutex_lock(&pdev->access_lock);
/* Select the channel */
ds2482_wait_1wire_idle(pdev);
@@ -370,7 +370,7 @@ static u8 ds2482_w1_read_byte(void *data)
/* Read the data byte */
result = i2c_smbus_read_byte(&pdev->client);
- up(&pdev->access_lock);
+ mutex_unlock(&pdev->access_lock);
return result;
}
@@ -389,7 +389,7 @@ static u8 ds2482_w1_reset_bus(void *data)
int err;
u8 retval = 1;
- down(&pdev->access_lock);
+ mutex_lock(&pdev->access_lock);
/* Select the channel */
ds2482_wait_1wire_idle(pdev);
@@ -409,7 +409,7 @@ static u8 ds2482_w1_reset_bus(void *data)
0xF0);
}
- up(&pdev->access_lock);
+ mutex_unlock(&pdev->access_lock);
return retval;
}
@@ -482,7 +482,7 @@ static int ds2482_detect(struct i2c_adapter *adapter, int address, int kind)
snprintf(new_client->name, sizeof(new_client->name), "ds2482-%d00",
data->w1_count);
- init_MUTEX(&data->access_lock);
+ mutex_init(&data->access_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
diff --git a/drivers/w1/masters/dscore.c b/drivers/w1/masters/ds2490.c
index 2cf7776..299e274 100644
--- a/drivers/w1/masters/dscore.c
+++ b/drivers/w1/masters/ds2490.c
@@ -24,7 +24,136 @@
#include <linux/mod_devicetable.h>
#include <linux/usb.h>
-#include "dscore.h"
+#include "../w1_int.h"
+#include "../w1.h"
+
+/* COMMAND TYPE CODES */
+#define CONTROL_CMD 0x00
+#define COMM_CMD 0x01
+#define MODE_CMD 0x02
+
+/* CONTROL COMMAND CODES */
+#define CTL_RESET_DEVICE 0x0000
+#define CTL_START_EXE 0x0001
+#define CTL_RESUME_EXE 0x0002
+#define CTL_HALT_EXE_IDLE 0x0003
+#define CTL_HALT_EXE_DONE 0x0004
+#define CTL_FLUSH_COMM_CMDS 0x0007
+#define CTL_FLUSH_RCV_BUFFER 0x0008
+#define CTL_FLUSH_XMT_BUFFER 0x0009
+#define CTL_GET_COMM_CMDS 0x000A
+
+/* MODE COMMAND CODES */
+#define MOD_PULSE_EN 0x0000
+#define MOD_SPEED_CHANGE_EN 0x0001
+#define MOD_1WIRE_SPEED 0x0002
+#define MOD_STRONG_PU_DURATION 0x0003
+#define MOD_PULLDOWN_SLEWRATE 0x0004
+#define MOD_PROG_PULSE_DURATION 0x0005
+#define MOD_WRITE1_LOWTIME 0x0006
+#define MOD_DSOW0_TREC 0x0007
+
+/* COMMUNICATION COMMAND CODES */
+#define COMM_ERROR_ESCAPE 0x0601
+#define COMM_SET_DURATION 0x0012
+#define COMM_BIT_IO 0x0020
+#define COMM_PULSE 0x0030
+#define COMM_1_WIRE_RESET 0x0042
+#define COMM_BYTE_IO 0x0052
+#define COMM_MATCH_ACCESS 0x0064
+#define COMM_BLOCK_IO 0x0074
+#define COMM_READ_STRAIGHT 0x0080
+#define COMM_DO_RELEASE 0x6092
+#define COMM_SET_PATH 0x00A2
+#define COMM_WRITE_SRAM_PAGE 0x00B2
+#define COMM_WRITE_EPROM 0x00C4
+#define COMM_READ_CRC_PROT_PAGE 0x00D4
+#define COMM_READ_REDIRECT_PAGE_CRC 0x21E4
+#define COMM_SEARCH_ACCESS 0x00F4
+
+/* Communication command bits */
+#define COMM_TYPE 0x0008
+#define COMM_SE 0x0008
+#define COMM_D 0x0008
+#define COMM_Z 0x0008
+#define COMM_CH 0x0008
+#define COMM_SM 0x0008
+#define COMM_R 0x0008
+#define COMM_IM 0x0001
+
+#define COMM_PS 0x4000
+#define COMM_PST 0x4000
+#define COMM_CIB 0x4000
+#define COMM_RTS 0x4000
+#define COMM_DT 0x2000
+#define COMM_SPU 0x1000
+#define COMM_F 0x0800
+#define COMM_NTP 0x0400
+#define COMM_ICP 0x0200
+#define COMM_RST 0x0100
+
+#define PULSE_PROG 0x01
+#define PULSE_SPUE 0x02
+
+#define BRANCH_MAIN 0xCC
+#define BRANCH_AUX 0x33
+
+/*
+ * Duration of the strong pull-up pulse in milliseconds.
+ */
+#define PULLUP_PULSE_DURATION 750
+
+/* Status flags */
+#define ST_SPUA 0x01 /* Strong Pull-up is active */
+#define ST_PRGA 0x02 /* 12V programming pulse is being generated */
+#define ST_12VP 0x04 /* external 12V programming voltage is present */
+#define ST_PMOD 0x08 /* DS2490 powered from USB and external sources */
+#define ST_HALT 0x10 /* DS2490 is currently halted */
+#define ST_IDLE 0x20 /* DS2490 is currently idle */
+#define ST_EPOF 0x80
+
+#define SPEED_NORMAL 0x00
+#define SPEED_FLEXIBLE 0x01
+#define SPEED_OVERDRIVE 0x02
+
+#define NUM_EP 4
+#define EP_CONTROL 0
+#define EP_STATUS 1
+#define EP_DATA_OUT 2
+#define EP_DATA_IN 3
+
+struct ds_device
+{
+ struct list_head ds_entry;
+
+ struct usb_device *udev;
+ struct usb_interface *intf;
+
+ int ep[NUM_EP];
+
+ struct w1_bus_master master;
+};
+
+struct ds_status
+{
+ u8 enable;
+ u8 speed;
+ u8 pullup_dur;
+ u8 ppuls_dur;
+ u8 pulldown_slew;
+ u8 write1_time;
+ u8 write0_time;
+ u8 reserved0;
+ u8 status;
+ u8 command0;
+ u8 command1;
+ u8 command_buffer_status;
+ u8 data_out_buffer_status;
+ u8 data_in_buffer_status;
+ u8 reserved1;
+ u8 reserved2;
+
+};
static struct usb_device_id ds_id_table [] = {
{ USB_DEVICE(0x04fa, 0x2490) },
@@ -35,21 +164,12 @@ MODULE_DEVICE_TABLE(usb, ds_id_table);
static int ds_probe(struct usb_interface *, const struct usb_device_id *);
static void ds_disconnect(struct usb_interface *);
-int ds_touch_bit(struct ds_device *, u8, u8 *);
-int ds_read_byte(struct ds_device *, u8 *);
-int ds_read_bit(struct ds_device *, u8 *);
-int ds_write_byte(struct ds_device *, u8);
-int ds_write_bit(struct ds_device *, u8);
-static int ds_start_pulse(struct ds_device *, int);
-int ds_reset(struct ds_device *, struct ds_status *);
-struct ds_device * ds_get_device(void);
-void ds_put_device(struct ds_device *);
-
static inline void ds_dump_status(unsigned char *, unsigned char *, int);
static int ds_send_control(struct ds_device *, u16, u16);
-static int ds_send_control_mode(struct ds_device *, u16, u16);
static int ds_send_control_cmd(struct ds_device *, u16, u16);
+static LIST_HEAD(ds_devices);
+static DEFINE_MUTEX(ds_mutex);
static struct usb_driver ds_driver = {
.name = "DS9490R",
@@ -58,20 +178,6 @@ static struct usb_driver ds_driver = {
.id_table = ds_id_table,
};
-static struct ds_device *ds_dev;
-
-struct ds_device * ds_get_device(void)
-{
- if (ds_dev)
- atomic_inc(&ds_dev->refcnt);
- return ds_dev;
-}
-
-void ds_put_device(struct ds_device *dev)
-{
- atomic_dec(&dev->refcnt);
-}
-
static int ds_send_control_cmd(struct ds_device *dev, u16 value, u16 index)
{
int err;
@@ -86,7 +192,7 @@ static int ds_send_control_cmd(struct ds_device *dev, u16 value, u16 index)
return err;
}
-
+#if 0
static int ds_send_control_mode(struct ds_device *dev, u16 value, u16 index)
{
int err;
@@ -101,7 +207,7 @@ static int ds_send_control_mode(struct ds_device *dev, u16 value, u16 index)
return err;
}
-
+#endif
static int ds_send_control(struct ds_device *dev, u16 value, u16 index)
{
int err;
@@ -324,7 +430,7 @@ static int ds_wait_status(struct ds_device *dev, struct ds_status *st)
return 0;
}
-int ds_reset(struct ds_device *dev, struct ds_status *st)
+static int ds_reset(struct ds_device *dev, struct ds_status *st)
{
int err;
@@ -345,7 +451,7 @@ int ds_reset(struct ds_device *dev, struct ds_status *st)
}
#if 0
-int ds_set_speed(struct ds_device *dev, int speed)
+static int ds_set_speed(struct ds_device *dev, int speed)
{
int err;
@@ -395,7 +501,7 @@ static int ds_start_pulse(struct ds_device *dev, int delay)
return err;
}
-int ds_touch_bit(struct ds_device *dev, u8 bit, u8 *tbit)
+static int ds_touch_bit(struct ds_device *dev, u8 bit, u8 *tbit)
{
int err, count;
struct ds_status st;
@@ -427,7 +533,7 @@ int ds_touch_bit(struct ds_device *dev, u8 bit, u8 *tbit)
return 0;
}
-int ds_write_bit(struct ds_device *dev, u8 bit)
+static int ds_write_bit(struct ds_device *dev, u8 bit)
{
int err;
struct ds_status st;
@@ -441,7 +547,7 @@ int ds_write_bit(struct ds_device *dev, u8 bit)
return 0;
}
-int ds_write_byte(struct ds_device *dev, u8 byte)
+static int ds_write_byte(struct ds_device *dev, u8 byte)
{
int err;
struct ds_status st;
@@ -464,26 +570,7 @@ int ds_write_byte(struct ds_device *dev, u8 byte)
return !(byte == rbyte);
}
-int ds_read_bit(struct ds_device *dev, u8 *bit)
-{
- int err;
-
- err = ds_send_control_mode(dev, MOD_PULSE_EN, PULSE_SPUE);
- if (err)
- return err;
-
- err = ds_send_control(dev, COMM_BIT_IO | COMM_IM | COMM_SPU | COMM_D, 0);
- if (err)
- return err;
-
- err = ds_recv_data(dev, bit, sizeof(*bit));
- if (err < 0)
- return err;
-
- return 0;
-}
-
-int ds_read_byte(struct ds_device *dev, u8 *byte)
+static int ds_read_byte(struct ds_device *dev, u8 *byte)
{
int err;
struct ds_status st;
@@ -501,7 +588,7 @@ int ds_read_byte(struct ds_device *dev, u8 *byte)
return 0;
}
-int ds_read_block(struct ds_device *dev, u8 *buf, int len)
+static int ds_read_block(struct ds_device *dev, u8 *buf, int len)
{
struct ds_status st;
int err;
@@ -527,7 +614,7 @@ int ds_read_block(struct ds_device *dev, u8 *buf, int len)
return err;
}
-int ds_write_block(struct ds_device *dev, u8 *buf, int len)
+static int ds_write_block(struct ds_device *dev, u8 *buf, int len)
{
int err;
struct ds_status st;
@@ -555,7 +642,7 @@ int ds_write_block(struct ds_device *dev, u8 *buf, int len)
#if 0
-int ds_search(struct ds_device *dev, u64 init, u64 *buf, u8 id_number, int conditional_search)
+static int ds_search(struct ds_device *dev, u64 init, u64 *buf, u8 id_number, int conditional_search)
{
int err;
u16 value, index;
@@ -584,7 +671,7 @@ int ds_search(struct ds_device *dev, u64 init, u64 *buf, u8 id_number, int condi
return err/8;
}
-int ds_match_access(struct ds_device *dev, u64 init)
+static int ds_match_access(struct ds_device *dev, u64 init)
{
int err;
struct ds_status st;
@@ -604,7 +691,7 @@ int ds_match_access(struct ds_device *dev, u64 init)
return 0;
}
-int ds_set_path(struct ds_device *dev, u64 init)
+static int ds_set_path(struct ds_device *dev, u64 init)
{
int err;
struct ds_status st;
@@ -630,45 +717,156 @@ int ds_set_path(struct ds_device *dev, u64 init)
#endif /* 0 */
+static u8 ds9490r_touch_bit(void *data, u8 bit)
+{
+ u8 ret;
+ struct ds_device *dev = data;
+
+ if (ds_touch_bit(dev, bit, &ret))
+ return 0;
+
+ return ret;
+}
+
+static void ds9490r_write_bit(void *data, u8 bit)
+{
+ struct ds_device *dev = data;
+
+ ds_write_bit(dev, bit);
+}
+
+static void ds9490r_write_byte(void *data, u8 byte)
+{
+ struct ds_device *dev = data;
+
+ ds_write_byte(dev, byte);
+}
+
+static u8 ds9490r_read_bit(void *data)
+{
+ struct ds_device *dev = data;
+ int err;
+ u8 bit = 0;
+
+ err = ds_touch_bit(dev, 1, &bit);
+ if (err)
+ return 0;
+
+ return bit & 1;
+}
+
+static u8 ds9490r_read_byte(void *data)
+{
+ struct ds_device *dev = data;
+ int err;
+ u8 byte = 0;
+
+ err = ds_read_byte(dev, &byte);
+ if (err)
+ return 0;
+
+ return byte;
+}
+
+static void ds9490r_write_block(void *data, const u8 *buf, int len)
+{
+ struct ds_device *dev = data;
+
+ ds_write_block(dev, (u8 *)buf, len);
+}
+
+static u8 ds9490r_read_block(void *data, u8 *buf, int len)
+{
+ struct ds_device *dev = data;
+ int err;
+
+ err = ds_read_block(dev, buf, len);
+ if (err < 0)
+ return 0;
+
+ return len;
+}
+
+static u8 ds9490r_reset(void *data)
+{
+ struct ds_device *dev = data;
+ struct ds_status st;
+ int err;
+
+ memset(&st, 0, sizeof(st));
+
+ err = ds_reset(dev, &st);
+ if (err)
+ return 1;
+
+ return 0;
+}
+
+static int ds_w1_init(struct ds_device *dev)
+{
+ memset(&dev->master, 0, sizeof(struct w1_bus_master));
+
+ dev->master.data = dev;
+ dev->master.touch_bit = &ds9490r_touch_bit;
+ dev->master.read_bit = &ds9490r_read_bit;
+ dev->master.write_bit = &ds9490r_write_bit;
+ dev->master.read_byte = &ds9490r_read_byte;
+ dev->master.write_byte = &ds9490r_write_byte;
+ dev->master.read_block = &ds9490r_read_block;
+ dev->master.write_block = &ds9490r_write_block;
+ dev->master.reset_bus = &ds9490r_reset;
+
+ return w1_add_master_device(&dev->master);
+}
+
+static void ds_w1_fini(struct ds_device *dev)
+{
+ w1_remove_master_device(&dev->master);
+}
+
static int ds_probe(struct usb_interface *intf,
const struct usb_device_id *udev_id)
{
struct usb_device *udev = interface_to_usbdev(intf);
struct usb_endpoint_descriptor *endpoint;
struct usb_host_interface *iface_desc;
+ struct ds_device *dev;
int i, err;
- ds_dev = kmalloc(sizeof(struct ds_device), GFP_KERNEL);
- if (!ds_dev) {
+ dev = kmalloc(sizeof(struct ds_device), GFP_KERNEL);
+ if (!dev) {
printk(KERN_INFO "Failed to allocate new DS9490R structure.\n");
return -ENOMEM;
}
+ dev->udev = usb_get_dev(udev);
+ if (!dev->udev) {
+ err = -ENOMEM;
+ goto err_out_free;
+ }
+ memset(dev->ep, 0, sizeof(dev->ep));
- ds_dev->udev = usb_get_dev(udev);
- usb_set_intfdata(intf, ds_dev);
+ usb_set_intfdata(intf, dev);
- err = usb_set_interface(ds_dev->udev, intf->altsetting[0].desc.bInterfaceNumber, 3);
+ err = usb_set_interface(dev->udev, intf->altsetting[0].desc.bInterfaceNumber, 3);
if (err) {
printk(KERN_ERR "Failed to set alternative setting 3 for %d interface: err=%d.\n",
intf->altsetting[0].desc.bInterfaceNumber, err);
- return err;
+ goto err_out_clear;
}
- err = usb_reset_configuration(ds_dev->udev);
+ err = usb_reset_configuration(dev->udev);
if (err) {
printk(KERN_ERR "Failed to reset configuration: err=%d.\n", err);
- return err;
+ goto err_out_clear;
}
iface_desc = &intf->altsetting[0];
if (iface_desc->desc.bNumEndpoints != NUM_EP-1) {
printk(KERN_INFO "Num endpoints=%d. It is not DS9490R.\n", iface_desc->desc.bNumEndpoints);
- return -ENODEV;
+ err = -EINVAL;
+ goto err_out_clear;
}
- atomic_set(&ds_dev->refcnt, 0);
- memset(ds_dev->ep, 0, sizeof(ds_dev->ep));
-
/*
* This loop doesn'd show control 0 endpoint,
* so we will fill only 1-3 endpoints entry.
@@ -676,54 +874,31 @@ static int ds_probe(struct usb_interface *intf,
for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
endpoint = &iface_desc->endpoint[i].desc;
- ds_dev->ep[i+1] = endpoint->bEndpointAddress;
-
+ dev->ep[i+1] = endpoint->bEndpointAddress;
+#if 0
printk("%d: addr=%x, size=%d, dir=%s, type=%x\n",
i, endpoint->bEndpointAddress, le16_to_cpu(endpoint->wMaxPacketSize),
(endpoint->bEndpointAddress & USB_DIR_IN)?"IN":"OUT",
endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK);
+#endif
}
-#if 0
- {
- int err, i;
- u64 buf[3];
- u64 init=0xb30000002078ee81ull;
- struct ds_status st;
-
- ds_reset(ds_dev, &st);
- err = ds_search(ds_dev, init, buf, 3, 0);
- if (err < 0)
- return err;
- for (i=0; i<err; ++i)
- printk("%d: %llx\n", i, buf[i]);
-
- printk("Resetting...\n");
- ds_reset(ds_dev, &st);
- printk("Setting path for %llx.\n", init);
- err = ds_set_path(ds_dev, init);
- if (err)
- return err;
- printk("Calling MATCH_ACCESS.\n");
- err = ds_match_access(ds_dev, init);
- if (err)
- return err;
-
- printk("Searching the bus...\n");
- err = ds_search(ds_dev, init, buf, 3, 0);
-
- printk("ds_search() returned %d\n", err);
-
- if (err < 0)
- return err;
- for (i=0; i<err; ++i)
- printk("%d: %llx\n", i, buf[i]);
+ err = ds_w1_init(dev);
+ if (err)
+ goto err_out_clear;
- return 0;
- }
-#endif
+ mutex_lock(&ds_mutex);
+ list_add_tail(&dev->ds_entry, &ds_devices);
+ mutex_unlock(&ds_mutex);
return 0;
+
+err_out_clear:
+ usb_set_intfdata(intf, NULL);
+ usb_put_dev(dev->udev);
+err_out_free:
+ kfree(dev);
+ return err;
}
static void ds_disconnect(struct usb_interface *intf)
@@ -731,19 +906,19 @@ static void ds_disconnect(struct usb_interface *intf)
struct ds_device *dev;
dev = usb_get_intfdata(intf);
- usb_set_intfdata(intf, NULL);
+ if (!dev)
+ return;
- while (atomic_read(&dev->refcnt)) {
- printk(KERN_INFO "Waiting for DS to become free: refcnt=%d.\n",
- atomic_read(&dev->refcnt));
+ mutex_lock(&ds_mutex);
+ list_del(&dev->ds_entry);
+ mutex_unlock(&ds_mutex);
- if (msleep_interruptible(1000))
- flush_signals(current);
- }
+ ds_w1_fini(dev);
+
+ usb_set_intfdata(intf, NULL);
usb_put_dev(dev->udev);
kfree(dev);
- ds_dev = NULL;
}
static int ds_init(void)
@@ -769,27 +944,4 @@ module_exit(ds_fini);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>");
-
-EXPORT_SYMBOL(ds_touch_bit);
-EXPORT_SYMBOL(ds_read_byte);
-EXPORT_SYMBOL(ds_read_bit);
-EXPORT_SYMBOL(ds_read_block);
-EXPORT_SYMBOL(ds_write_byte);
-EXPORT_SYMBOL(ds_write_bit);
-EXPORT_SYMBOL(ds_write_block);
-EXPORT_SYMBOL(ds_reset);
-EXPORT_SYMBOL(ds_get_device);
-EXPORT_SYMBOL(ds_put_device);
-
-/*
- * This functions can be used for EEPROM programming,
- * when driver will be included into mainline this will
- * require uncommenting.
- */
-#if 0
-EXPORT_SYMBOL(ds_start_pulse);
-EXPORT_SYMBOL(ds_set_speed);
-EXPORT_SYMBOL(ds_detect);
-EXPORT_SYMBOL(ds_stop_pulse);
-EXPORT_SYMBOL(ds_search);
-#endif
+MODULE_DESCRIPTION("DS2490 USB <-> W1 bus master driver (DS9490*)");
diff --git a/drivers/w1/masters/ds_w1_bridge.c b/drivers/w1/masters/ds_w1_bridge.c
deleted file mode 100644
index 5d30783..0000000
--- a/drivers/w1/masters/ds_w1_bridge.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * ds_w1_bridge.c
- *
- * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-
-#include "../w1.h"
-#include "../w1_int.h"
-#include "dscore.h"
-
-static struct ds_device *ds_dev;
-static struct w1_bus_master *ds_bus_master;
-
-static u8 ds9490r_touch_bit(void *data, u8 bit)
-{
- u8 ret;
- struct ds_device *dev = data;
-
- if (ds_touch_bit(dev, bit, &ret))
- return 0;
-
- return ret;
-}
-
-static void ds9490r_write_bit(void *data, u8 bit)
-{
- struct ds_device *dev = data;
-
- ds_write_bit(dev, bit);
-}
-
-static void ds9490r_write_byte(void *data, u8 byte)
-{
- struct ds_device *dev = data;
-
- ds_write_byte(dev, byte);
-}
-
-static u8 ds9490r_read_bit(void *data)
-{
- struct ds_device *dev = data;
- int err;
- u8 bit = 0;
-
- err = ds_touch_bit(dev, 1, &bit);
- if (err)
- return 0;
- //err = ds_read_bit(dev, &bit);
- //if (err)
- // return 0;
-
- return bit & 1;
-}
-
-static u8 ds9490r_read_byte(void *data)
-{
- struct ds_device *dev = data;
- int err;
- u8 byte = 0;
-
- err = ds_read_byte(dev, &byte);
- if (err)
- return 0;
-
- return byte;
-}
-
-static void ds9490r_write_block(void *data, const u8 *buf, int len)
-{
- struct ds_device *dev = data;
-
- ds_write_block(dev, (u8 *)buf, len);
-}
-
-static u8 ds9490r_read_block(void *data, u8 *buf, int len)
-{
- struct ds_device *dev = data;
- int err;
-
- err = ds_read_block(dev, buf, len);
- if (err < 0)
- return 0;
-
- return len;
-}
-
-static u8 ds9490r_reset(void *data)
-{
- struct ds_device *dev = data;
- struct ds_status st;
- int err;
-
- memset(&st, 0, sizeof(st));
-
- err = ds_reset(dev, &st);
- if (err)
- return 1;
-
- return 0;
-}
-
-static int __devinit ds_w1_init(void)
-{
- int err;
-
- ds_bus_master = kmalloc(sizeof(*ds_bus_master), GFP_KERNEL);
- if (!ds_bus_master) {
- printk(KERN_ERR "Failed to allocate DS9490R USB<->W1 bus_master structure.\n");
- return -ENOMEM;
- }
-
- ds_dev = ds_get_device();
- if (!ds_dev) {
- printk(KERN_ERR "DS9490R is not registered.\n");
- err = -ENODEV;
- goto err_out_free_bus_master;
- }
-
- memset(ds_bus_master, 0, sizeof(*ds_bus_master));
-
- ds_bus_master->data = ds_dev;
- ds_bus_master->touch_bit = &ds9490r_touch_bit;
- ds_bus_master->read_bit = &ds9490r_read_bit;
- ds_bus_master->write_bit = &ds9490r_write_bit;
- ds_bus_master->read_byte = &ds9490r_read_byte;
- ds_bus_master->write_byte = &ds9490r_write_byte;
- ds_bus_master->read_block = &ds9490r_read_block;
- ds_bus_master->write_block = &ds9490r_write_block;
- ds_bus_master->reset_bus = &ds9490r_reset;
-
- err = w1_add_master_device(ds_bus_master);
- if (err)
- goto err_out_put_device;
-
- return 0;
-
-err_out_put_device:
- ds_put_device(ds_dev);
-err_out_free_bus_master:
- kfree(ds_bus_master);
-
- return err;
-}
-
-static void __devexit ds_w1_fini(void)
-{
- w1_remove_master_device(ds_bus_master);
- ds_put_device(ds_dev);
- kfree(ds_bus_master);
-}
-
-module_init(ds_w1_init);
-module_exit(ds_w1_fini);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>");
diff --git a/drivers/w1/masters/dscore.h b/drivers/w1/masters/dscore.h
deleted file mode 100644
index 6cf5671..0000000
--- a/drivers/w1/masters/dscore.h
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * dscore.h
- *
- * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __DSCORE_H
-#define __DSCORE_H
-
-#include <linux/usb.h>
-#include <asm/atomic.h>
-
-/* COMMAND TYPE CODES */
-#define CONTROL_CMD 0x00
-#define COMM_CMD 0x01
-#define MODE_CMD 0x02
-
-/* CONTROL COMMAND CODES */
-#define CTL_RESET_DEVICE 0x0000
-#define CTL_START_EXE 0x0001
-#define CTL_RESUME_EXE 0x0002
-#define CTL_HALT_EXE_IDLE 0x0003
-#define CTL_HALT_EXE_DONE 0x0004
-#define CTL_FLUSH_COMM_CMDS 0x0007
-#define CTL_FLUSH_RCV_BUFFER 0x0008
-#define CTL_FLUSH_XMT_BUFFER 0x0009
-#define CTL_GET_COMM_CMDS 0x000A
-
-/* MODE COMMAND CODES */
-#define MOD_PULSE_EN 0x0000
-#define MOD_SPEED_CHANGE_EN 0x0001
-#define MOD_1WIRE_SPEED 0x0002
-#define MOD_STRONG_PU_DURATION 0x0003
-#define MOD_PULLDOWN_SLEWRATE 0x0004
-#define MOD_PROG_PULSE_DURATION 0x0005
-#define MOD_WRITE1_LOWTIME 0x0006
-#define MOD_DSOW0_TREC 0x0007
-
-/* COMMUNICATION COMMAND CODES */
-#define COMM_ERROR_ESCAPE 0x0601
-#define COMM_SET_DURATION 0x0012
-#define COMM_BIT_IO 0x0020
-#define COMM_PULSE 0x0030
-#define COMM_1_WIRE_RESET 0x0042
-#define COMM_BYTE_IO 0x0052
-#define COMM_MATCH_ACCESS 0x0064
-#define COMM_BLOCK_IO 0x0074
-#define COMM_READ_STRAIGHT 0x0080
-#define COMM_DO_RELEASE 0x6092
-#define COMM_SET_PATH 0x00A2
-#define COMM_WRITE_SRAM_PAGE 0x00B2
-#define COMM_WRITE_EPROM 0x00C4
-#define COMM_READ_CRC_PROT_PAGE 0x00D4
-#define COMM_READ_REDIRECT_PAGE_CRC 0x21E4
-#define COMM_SEARCH_ACCESS 0x00F4
-
-/* Communication command bits */
-#define COMM_TYPE 0x0008
-#define COMM_SE 0x0008
-#define COMM_D 0x0008
-#define COMM_Z 0x0008
-#define COMM_CH 0x0008
-#define COMM_SM 0x0008
-#define COMM_R 0x0008
-#define COMM_IM 0x0001
-
-#define COMM_PS 0x4000
-#define COMM_PST 0x4000
-#define COMM_CIB 0x4000
-#define COMM_RTS 0x4000
-#define COMM_DT 0x2000
-#define COMM_SPU 0x1000
-#define COMM_F 0x0800
-#define COMM_NTP 0x0400
-#define COMM_ICP 0x0200
-#define COMM_RST 0x0100
-
-#define PULSE_PROG 0x01
-#define PULSE_SPUE 0x02
-
-#define BRANCH_MAIN 0xCC
-#define BRANCH_AUX 0x33
-
-/*
- * Duration of the strong pull-up pulse in milliseconds.
- */
-#define PULLUP_PULSE_DURATION 750
-
-/* Status flags */
-#define ST_SPUA 0x01 /* Strong Pull-up is active */
-#define ST_PRGA 0x02 /* 12V programming pulse is being generated */
-#define ST_12VP 0x04 /* external 12V programming voltage is present */
-#define ST_PMOD 0x08 /* DS2490 powered from USB and external sources */
-#define ST_HALT 0x10 /* DS2490 is currently halted */
-#define ST_IDLE 0x20 /* DS2490 is currently idle */
-#define ST_EPOF 0x80
-
-#define SPEED_NORMAL 0x00
-#define SPEED_FLEXIBLE 0x01
-#define SPEED_OVERDRIVE 0x02
-
-#define NUM_EP 4
-#define EP_CONTROL 0
-#define EP_STATUS 1
-#define EP_DATA_OUT 2
-#define EP_DATA_IN 3
-
-struct ds_device
-{
- struct usb_device *udev;
- struct usb_interface *intf;
-
- int ep[NUM_EP];
-
- atomic_t refcnt;
-};
-
-struct ds_status
-{
- u8 enable;
- u8 speed;
- u8 pullup_dur;
- u8 ppuls_dur;
- u8 pulldown_slew;
- u8 write1_time;
- u8 write0_time;
- u8 reserved0;
- u8 status;
- u8 command0;
- u8 command1;
- u8 command_buffer_status;
- u8 data_out_buffer_status;
- u8 data_in_buffer_status;
- u8 reserved1;
- u8 reserved2;
-
-};
-
-int ds_touch_bit(struct ds_device *, u8, u8 *);
-int ds_read_byte(struct ds_device *, u8 *);
-int ds_read_bit(struct ds_device *, u8 *);
-int ds_write_byte(struct ds_device *, u8);
-int ds_write_bit(struct ds_device *, u8);
-int ds_reset(struct ds_device *, struct ds_status *);
-struct ds_device * ds_get_device(void);
-void ds_put_device(struct ds_device *);
-int ds_write_block(struct ds_device *, u8 *, int);
-int ds_read_block(struct ds_device *, u8 *, int);
-
-#endif /* __DSCORE_H */
-
diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig
index f9d4c91..d18d642 100644
--- a/drivers/w1/slaves/Kconfig
+++ b/drivers/w1/slaves/Kconfig
@@ -28,7 +28,7 @@ config W1_SLAVE_DS2433
config W1_SLAVE_DS2433_CRC
bool "Protect DS2433 data with a CRC16"
- depends on W1_DS2433
+ depends on W1_SLAVE_DS2433
select CRC16
help
Say Y here to protect DS2433 data with a CRC16.
diff --git a/drivers/w1/slaves/w1_ds2433.c b/drivers/w1/slaves/w1_ds2433.c
index fb118be..2ac238f 100644
--- a/drivers/w1/slaves/w1_ds2433.c
+++ b/drivers/w1/slaves/w1_ds2433.c
@@ -22,7 +22,6 @@
#endif
#include "../w1.h"
-#include "../w1_io.h"
#include "../w1_int.h"
#include "../w1_family.h"
@@ -106,11 +105,7 @@ static ssize_t w1_f23_read_bin(struct kobject *kobj, char *buf, loff_t off,
if ((count = w1_f23_fix_count(off, count, W1_EEPROM_SIZE)) == 0)
return 0;
- atomic_inc(&sl->refcnt);
- if (down_interruptible(&sl->master->mutex)) {
- count = 0;
- goto out_dec;
- }
+ mutex_lock(&sl->master->mutex);
#ifdef CONFIG_W1_F23_CRC
@@ -141,9 +136,7 @@ static ssize_t w1_f23_read_bin(struct kobject *kobj, char *buf, loff_t off,
#endif /* CONFIG_W1_F23_CRC */
out_up:
- up(&sl->master->mutex);
-out_dec:
- atomic_dec(&sl->refcnt);
+ mutex_unlock(&sl->master->mutex);
return count;
}
@@ -232,11 +225,7 @@ static ssize_t w1_f23_write_bin(struct kobject *kobj, char *buf, loff_t off,
}
#endif /* CONFIG_W1_F23_CRC */
- atomic_inc(&sl->refcnt);
- if (down_interruptible(&sl->master->mutex)) {
- count = 0;
- goto out_dec;
- }
+ mutex_lock(&sl->master->mutex);
/* Can only write data to one page at a time */
idx = 0;
@@ -254,9 +243,7 @@ static ssize_t w1_f23_write_bin(struct kobject *kobj, char *buf, loff_t off,
}
out_up:
- up(&sl->master->mutex);
-out_dec:
- atomic_dec(&sl->refcnt);
+ mutex_unlock(&sl->master->mutex);
return count;
}
diff --git a/drivers/w1/slaves/w1_smem.c b/drivers/w1/slaves/w1_smem.c
index c6d3be5..cc8c02e 100644
--- a/drivers/w1/slaves/w1_smem.c
+++ b/drivers/w1/slaves/w1_smem.c
@@ -28,7 +28,6 @@
#include <linux/types.h>
#include "../w1.h"
-#include "../w1_io.h"
#include "../w1_int.h"
#include "../w1_family.h"
diff --git a/drivers/w1/slaves/w1_therm.c b/drivers/w1/slaves/w1_therm.c
index 536d16d..5372cfc 100644
--- a/drivers/w1/slaves/w1_therm.c
+++ b/drivers/w1/slaves/w1_therm.c
@@ -29,7 +29,6 @@
#include <linux/delay.h>
#include "../w1.h"
-#include "../w1_io.h"
#include "../w1_int.h"
#include "../w1_family.h"
@@ -166,12 +165,7 @@ static ssize_t w1_therm_read_bin(struct kobject *kobj, char *buf, loff_t off, si
u8 rom[9], crc, verdict;
int i, max_trying = 10;
- atomic_inc(&sl->refcnt);
- smp_mb__after_atomic_inc();
- if (down_interruptible(&sl->master->mutex)) {
- count = 0;
- goto out_dec;
- }
+ mutex_lock(&sl->master->mutex);
if (off > W1_SLAVE_DATA_SIZE) {
count = 0;
@@ -234,10 +228,7 @@ static ssize_t w1_therm_read_bin(struct kobject *kobj, char *buf, loff_t off, si
count += sprintf(buf + count, "t=%d\n", w1_convert_temp(rom, sl->family->fid));
out:
- up(&dev->mutex);
-out_dec:
- smp_mb__before_atomic_inc();
- atomic_dec(&sl->refcnt);
+ mutex_unlock(&dev->mutex);
return count;
}
diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c
index a698b51..de3e979 100644
--- a/drivers/w1/w1.c
+++ b/drivers/w1/w1.c
@@ -35,7 +35,6 @@
#include <asm/atomic.h>
#include "w1.h"
-#include "w1_io.h"
#include "w1_log.h"
#include "w1_int.h"
#include "w1_family.h"
@@ -55,7 +54,7 @@ module_param_named(control_timeout, w1_control_timeout, int, 0);
module_param_named(max_slave_count, w1_max_slave_count, int, 0);
module_param_named(slave_ttl, w1_max_slave_ttl, int, 0);
-DEFINE_SPINLOCK(w1_mlock);
+DEFINE_MUTEX(w1_mlock);
LIST_HEAD(w1_masters);
static struct task_struct *w1_control_thread;
@@ -75,8 +74,6 @@ static void w1_master_release(struct device *dev)
struct w1_master *md = dev_to_w1_master(dev);
dev_dbg(dev, "%s: Releasing %s.\n", __func__, md->name);
-
- dev_fini_netlink(md);
memset(md, 0, sizeof(struct w1_master) + sizeof(struct w1_bus_master));
kfree(md);
}
@@ -85,10 +82,10 @@ static void w1_slave_release(struct device *dev)
{
struct w1_slave *sl = dev_to_w1_slave(dev);
- dev_dbg(dev, "%s: Releasing %s.\n", __func__, sl->name);
+ printk("%s: Releasing %s.\n", __func__, sl->name);
while (atomic_read(&sl->refcnt)) {
- dev_dbg(dev, "Waiting for %s to become free: refcnt=%d.\n",
+ printk("Waiting for %s to become free: refcnt=%d.\n",
sl->name, atomic_read(&sl->refcnt));
if (msleep_interruptible(1000))
flush_signals(current);
@@ -111,7 +108,6 @@ static ssize_t w1_slave_read_id(struct kobject *kobj, char *buf, loff_t off, siz
{
struct w1_slave *sl = kobj_to_w1_slave(kobj);
- atomic_inc(&sl->refcnt);
if (off > 8) {
count = 0;
} else {
@@ -120,7 +116,6 @@ static ssize_t w1_slave_read_id(struct kobject *kobj, char *buf, loff_t off, siz
memcpy(buf, (u8 *)&sl->reg_num, count);
}
- atomic_dec(&sl->refcnt);
return count;
}
@@ -139,7 +134,63 @@ static struct bin_attribute w1_slave_attr_bin_id = {
};
/* Default family */
-static struct w1_family w1_default_family;
+
+static ssize_t w1_default_write(struct kobject *kobj, char *buf, loff_t off, size_t count)
+{
+ struct w1_slave *sl = kobj_to_w1_slave(kobj);
+
+ mutex_lock(&sl->master->mutex);
+ if (w1_reset_select_slave(sl)) {
+ count = 0;
+ goto out_up;
+ }
+
+ w1_write_block(sl->master, buf, count);
+
+out_up:
+ mutex_unlock(&sl->master->mutex);
+ return count;
+}
+
+static ssize_t w1_default_read(struct kobject *kobj, char *buf, loff_t off, size_t count)
+{
+ struct w1_slave *sl = kobj_to_w1_slave(kobj);
+
+ mutex_lock(&sl->master->mutex);
+ w1_read_block(sl->master, buf, count);
+ mutex_unlock(&sl->master->mutex);
+ return count;
+}
+
+static struct bin_attribute w1_default_attr = {
+ .attr = {
+ .name = "rw",
+ .mode = S_IRUGO | S_IWUSR,
+ .owner = THIS_MODULE,
+ },
+ .size = PAGE_SIZE,
+ .read = w1_default_read,
+ .write = w1_default_write,
+};
+
+static int w1_default_add_slave(struct w1_slave *sl)
+{
+ return sysfs_create_bin_file(&sl->dev.kobj, &w1_default_attr);
+}
+
+static void w1_default_remove_slave(struct w1_slave *sl)
+{
+ sysfs_remove_bin_file(&sl->dev.kobj, &w1_default_attr);
+}
+
+static struct w1_family_ops w1_default_fops = {
+ .add_slave = w1_default_add_slave,
+ .remove_slave = w1_default_remove_slave,
+};
+
+static struct w1_family w1_default_family = {
+ .fops = &w1_default_fops,
+};
static int w1_uevent(struct device *dev, char **envp, int num_envp, char *buffer, int buffer_size);
@@ -183,12 +234,9 @@ static ssize_t w1_master_attribute_show_name(struct device *dev, struct device_a
struct w1_master *md = dev_to_w1_master(dev);
ssize_t count;
- if (down_interruptible (&md->mutex))
- return -EBUSY;
-
+ mutex_lock(&md->mutex);
count = sprintf(buf, "%s\n", md->name);
-
- up(&md->mutex);
+ mutex_unlock(&md->mutex);
return count;
}
@@ -199,12 +247,9 @@ static ssize_t w1_master_attribute_store_search(struct device * dev,
{
struct w1_master *md = dev_to_w1_master(dev);
- if (down_interruptible (&md->mutex))
- return -EBUSY;
-
+ mutex_lock(&md->mutex);
md->search_count = simple_strtol(buf, NULL, 0);
-
- up(&md->mutex);
+ mutex_unlock(&md->mutex);
return count;
}
@@ -216,12 +261,9 @@ static ssize_t w1_master_attribute_show_search(struct device *dev,
struct w1_master *md = dev_to_w1_master(dev);
ssize_t count;
- if (down_interruptible (&md->mutex))
- return -EBUSY;
-
+ mutex_lock(&md->mutex);
count = sprintf(buf, "%d\n", md->search_count);
-
- up(&md->mutex);
+ mutex_unlock(&md->mutex);
return count;
}
@@ -231,12 +273,9 @@ static ssize_t w1_master_attribute_show_pointer(struct device *dev, struct devic
struct w1_master *md = dev_to_w1_master(dev);
ssize_t count;
- if (down_interruptible(&md->mutex))
- return -EBUSY;
-
+ mutex_lock(&md->mutex);
count = sprintf(buf, "0x%p\n", md->bus_master);
-
- up(&md->mutex);
+ mutex_unlock(&md->mutex);
return count;
}
@@ -252,12 +291,9 @@ static ssize_t w1_master_attribute_show_max_slave_count(struct device *dev, stru
struct w1_master *md = dev_to_w1_master(dev);
ssize_t count;
- if (down_interruptible(&md->mutex))
- return -EBUSY;
-
+ mutex_lock(&md->mutex);
count = sprintf(buf, "%d\n", md->max_slave_count);
-
- up(&md->mutex);
+ mutex_unlock(&md->mutex);
return count;
}
@@ -266,12 +302,9 @@ static ssize_t w1_master_attribute_show_attempts(struct device *dev, struct devi
struct w1_master *md = dev_to_w1_master(dev);
ssize_t count;
- if (down_interruptible(&md->mutex))
- return -EBUSY;
-
+ mutex_lock(&md->mutex);
count = sprintf(buf, "%lu\n", md->attempts);
-
- up(&md->mutex);
+ mutex_unlock(&md->mutex);
return count;
}
@@ -280,12 +313,9 @@ static ssize_t w1_master_attribute_show_slave_count(struct device *dev, struct d
struct w1_master *md = dev_to_w1_master(dev);
ssize_t count;
- if (down_interruptible(&md->mutex))
- return -EBUSY;
-
+ mutex_lock(&md->mutex);
count = sprintf(buf, "%d\n", md->slave_count);
-
- up(&md->mutex);
+ mutex_unlock(&md->mutex);
return count;
}
@@ -294,8 +324,7 @@ static ssize_t w1_master_attribute_show_slaves(struct device *dev, struct device
struct w1_master *md = dev_to_w1_master(dev);
int c = PAGE_SIZE;
- if (down_interruptible(&md->mutex))
- return -EBUSY;
+ mutex_lock(&md->mutex);
if (md->slave_count == 0)
c -= snprintf(buf + PAGE_SIZE - c, c, "not found.\n");
@@ -310,7 +339,7 @@ static ssize_t w1_master_attribute_show_slaves(struct device *dev, struct device
}
}
- up(&md->mutex);
+ mutex_unlock(&md->mutex);
return PAGE_SIZE - c;
}
@@ -362,7 +391,8 @@ static void w1_destroy_master_attributes(struct w1_master *master)
}
#ifdef CONFIG_HOTPLUG
-static int w1_uevent(struct device *dev, char **envp, int num_envp, char *buffer, int buffer_size)
+static int w1_uevent(struct device *dev, char **envp, int num_envp,
+ char *buffer, int buffer_size)
{
struct w1_master *md = NULL;
struct w1_slave *sl = NULL;
@@ -382,7 +412,8 @@ static int w1_uevent(struct device *dev, char **envp, int num_envp, char *buffer
return -EINVAL;
}
- dev_dbg(dev, "Hotplug event for %s %s, bus_id=%s.\n", event_owner, name, dev->bus_id);
+ dev_dbg(dev, "Hotplug event for %s %s, bus_id=%s.\n",
+ event_owner, name, dev->bus_id);
if (dev->driver != &w1_slave_driver || !sl)
return 0;
@@ -401,7 +432,8 @@ static int w1_uevent(struct device *dev, char **envp, int num_envp, char *buffer
return 0;
};
#else
-static int w1_uevent(struct device *dev, char **envp, int num_envp, char *buffer, int buffer_size)
+static int w1_uevent(struct device *dev, char **envp, int num_envp,
+ char *buffer, int buffer_size)
{
return 0;
}
@@ -425,7 +457,8 @@ static int __w1_attach_slave_device(struct w1_slave *sl)
(unsigned int) sl->reg_num.family,
(unsigned long long) sl->reg_num.id);
- dev_dbg(&sl->dev, "%s: registering %s as %p.\n", __func__, &sl->dev.bus_id[0]);
+ dev_dbg(&sl->dev, "%s: registering %s as %p.\n", __func__,
+ &sl->dev.bus_id[0]);
err = device_register(&sl->dev);
if (err < 0) {
@@ -496,6 +529,7 @@ static int w1_attach_slave_device(struct w1_master *dev, struct w1_reg_num *rn)
sl->master = dev;
set_bit(W1_SLAVE_ACTIVE, (long *)&sl->flags);
+ memset(&msg, 0, sizeof(msg));
memcpy(&sl->reg_num, rn, sizeof(sl->reg_num));
atomic_set(&sl->refcnt, 0);
init_completion(&sl->released);
@@ -526,7 +560,7 @@ static int w1_attach_slave_device(struct w1_master *dev, struct w1_reg_num *rn)
sl->ttl = dev->slave_ttl;
dev->slave_count++;
- memcpy(&msg.id.id, rn, sizeof(msg.id.id));
+ memcpy(msg.id.id, rn, sizeof(msg.id));
msg.type = W1_SLAVE_ADD;
w1_netlink_send(dev, &msg);
@@ -544,7 +578,8 @@ static void w1_slave_detach(struct w1_slave *sl)
if (sl->family->fops && sl->family->fops->remove_slave)
sl->family->fops->remove_slave(sl);
- memcpy(&msg.id.id, &sl->reg_num, sizeof(msg.id.id));
+ memset(&msg, 0, sizeof(msg));
+ memcpy(msg.id.id, &sl->reg_num, sizeof(msg.id));
msg.type = W1_SLAVE_REMOVE;
w1_netlink_send(sl->master, &msg);
@@ -561,7 +596,7 @@ static struct w1_master *w1_search_master(void *data)
struct w1_master *dev;
int found = 0;
- spin_lock_bh(&w1_mlock);
+ mutex_lock(&w1_mlock);
list_for_each_entry(dev, &w1_masters, w1_master_entry) {
if (dev->bus_master->data == data) {
found = 1;
@@ -569,22 +604,69 @@ static struct w1_master *w1_search_master(void *data)
break;
}
}
- spin_unlock_bh(&w1_mlock);
+ mutex_unlock(&w1_mlock);
+
+ return (found)?dev:NULL;
+}
+
+struct w1_master *w1_search_master_id(u32 id)
+{
+ struct w1_master *dev;
+ int found = 0;
+
+ mutex_lock(&w1_mlock);
+ list_for_each_entry(dev, &w1_masters, w1_master_entry) {
+ if (dev->id == id) {
+ found = 1;
+ atomic_inc(&dev->refcnt);
+ break;
+ }
+ }
+ mutex_unlock(&w1_mlock);
return (found)?dev:NULL;
}
+struct w1_slave *w1_search_slave(struct w1_reg_num *id)
+{
+ struct w1_master *dev;
+ struct w1_slave *sl = NULL;
+ int found = 0;
+
+ mutex_lock(&w1_mlock);
+ list_for_each_entry(dev, &w1_masters, w1_master_entry) {
+ mutex_lock(&dev->mutex);
+ list_for_each_entry(sl, &dev->slist, w1_slave_entry) {
+ if (sl->reg_num.family == id->family &&
+ sl->reg_num.id == id->id &&
+ sl->reg_num.crc == id->crc) {
+ found = 1;
+ atomic_inc(&dev->refcnt);
+ atomic_inc(&sl->refcnt);
+ break;
+ }
+ }
+ mutex_unlock(&dev->mutex);
+
+ if (found)
+ break;
+ }
+ mutex_unlock(&w1_mlock);
+
+ return (found)?sl:NULL;
+}
+
void w1_reconnect_slaves(struct w1_family *f)
{
struct w1_master *dev;
- spin_lock_bh(&w1_mlock);
+ mutex_lock(&w1_mlock);
list_for_each_entry(dev, &w1_masters, w1_master_entry) {
dev_dbg(&dev->dev, "Reconnecting slaves in %s into new family %02x.\n",
dev->name, f->fid);
set_bit(W1_MASTER_NEED_RECONNECT, &dev->flags);
}
- spin_unlock_bh(&w1_mlock);
+ mutex_unlock(&w1_mlock);
}
static void w1_slave_found(void *data, u64 rn)
@@ -646,7 +728,7 @@ static void w1_slave_found(void *data, u64 rn)
* @dev The master device to search
* @cb Function to call when a device is found
*/
-void w1_search(struct w1_master *dev, w1_slave_found_callback cb)
+void w1_search(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb)
{
u64 last_rn, rn, tmp64;
int i, slave_count = 0;
@@ -677,7 +759,7 @@ void w1_search(struct w1_master *dev, w1_slave_found_callback cb)
}
/* Start the search */
- w1_write_8(dev, W1_SEARCH);
+ w1_write_8(dev, search_type);
for (i = 0; i < 64; ++i) {
/* Determine the direction/search bit */
if (i == desc_bit)
@@ -739,23 +821,23 @@ static int w1_control(void *data)
if (kthread_should_stop() || test_bit(W1_MASTER_NEED_EXIT, &dev->flags)) {
set_bit(W1_MASTER_NEED_EXIT, &dev->flags);
- spin_lock(&w1_mlock);
+ mutex_lock(&w1_mlock);
list_del(&dev->w1_master_entry);
- spin_unlock(&w1_mlock);
+ mutex_unlock(&w1_mlock);
- down(&dev->mutex);
+ mutex_lock(&dev->mutex);
list_for_each_entry_safe(sl, sln, &dev->slist, w1_slave_entry) {
w1_slave_detach(sl);
}
w1_destroy_master_attributes(dev);
- up(&dev->mutex);
+ mutex_unlock(&dev->mutex);
atomic_dec(&dev->refcnt);
continue;
}
if (test_bit(W1_MASTER_NEED_RECONNECT, &dev->flags)) {
dev_dbg(&dev->dev, "Reconnecting slaves in device %s.\n", dev->name);
- down(&dev->mutex);
+ mutex_lock(&dev->mutex);
list_for_each_entry_safe(sl, sln, &dev->slist, w1_slave_entry) {
if (sl->family->fid == W1_FAMILY_DEFAULT) {
struct w1_reg_num rn;
@@ -768,7 +850,7 @@ static int w1_control(void *data)
}
dev_dbg(&dev->dev, "Reconnecting slaves in device %s has been finished.\n", dev->name);
clear_bit(W1_MASTER_NEED_RECONNECT, &dev->flags);
- up(&dev->mutex);
+ mutex_unlock(&dev->mutex);
}
}
}
@@ -776,10 +858,31 @@ static int w1_control(void *data)
return 0;
}
+void w1_search_process(struct w1_master *dev, u8 search_type)
+{
+ struct w1_slave *sl, *sln;
+
+ list_for_each_entry(sl, &dev->slist, w1_slave_entry)
+ clear_bit(W1_SLAVE_ACTIVE, (long *)&sl->flags);
+
+ w1_search_devices(dev, search_type, w1_slave_found);
+
+ list_for_each_entry_safe(sl, sln, &dev->slist, w1_slave_entry) {
+ if (!test_bit(W1_SLAVE_ACTIVE, (unsigned long *)&sl->flags) && !--sl->ttl) {
+ w1_slave_detach(sl);
+
+ dev->slave_count--;
+ } else if (test_bit(W1_SLAVE_ACTIVE, (unsigned long *)&sl->flags))
+ sl->ttl = dev->slave_ttl;
+ }
+
+ if (dev->search_count > 0)
+ dev->search_count--;
+}
+
int w1_process(void *data)
{
struct w1_master *dev = (struct w1_master *) data;
- struct w1_slave *sl, *sln;
while (!kthread_should_stop() && !test_bit(W1_MASTER_NEED_EXIT, &dev->flags)) {
try_to_freeze();
@@ -794,27 +897,9 @@ int w1_process(void *data)
if (dev->search_count == 0)
continue;
- if (down_interruptible(&dev->mutex))
- continue;
-
- list_for_each_entry(sl, &dev->slist, w1_slave_entry)
- clear_bit(W1_SLAVE_ACTIVE, (long *)&sl->flags);
-
- w1_search_devices(dev, w1_slave_found);
-
- list_for_each_entry_safe(sl, sln, &dev->slist, w1_slave_entry) {
- if (!test_bit(W1_SLAVE_ACTIVE, (unsigned long *)&sl->flags) && !--sl->ttl) {
- w1_slave_detach(sl);
-
- dev->slave_count--;
- } else if (test_bit(W1_SLAVE_ACTIVE, (unsigned long *)&sl->flags))
- sl->ttl = dev->slave_ttl;
- }
-
- if (dev->search_count > 0)
- dev->search_count--;
-
- up(&dev->mutex);
+ mutex_lock(&dev->mutex);
+ w1_search_process(dev, W1_SEARCH);
+ mutex_unlock(&dev->mutex);
}
atomic_dec(&dev->refcnt);
@@ -828,6 +913,8 @@ static int w1_init(void)
printk(KERN_INFO "Driver for 1-wire Dallas network protocol.\n");
+ w1_init_netlink();
+
retval = bus_register(&w1_bus_type);
if (retval) {
printk(KERN_ERR "Failed to register bus. err=%d.\n", retval);
@@ -880,6 +967,8 @@ static void w1_fini(void)
list_for_each_entry(dev, &w1_masters, w1_master_entry)
__w1_remove_master_device(dev);
+ w1_fini_netlink();
+
kthread_stop(w1_control_thread);
driver_unregister(&w1_slave_driver);
diff --git a/drivers/w1/w1.h b/drivers/w1/w1.h
index 5698050..f1df534 100644
--- a/drivers/w1/w1.h
+++ b/drivers/w1/w1.h
@@ -41,10 +41,7 @@ struct w1_reg_num
#include <linux/completion.h>
#include <linux/device.h>
-
-#include <net/sock.h>
-
-#include <asm/semaphore.h>
+#include <linux/mutex.h>
#include "w1_family.h"
@@ -52,7 +49,7 @@ struct w1_reg_num
#define W1_SLAVE_DATA_SIZE 128
#define W1_SEARCH 0xF0
-#define W1_CONDITIONAL_SEARCH 0xEC
+#define W1_ALARM_SEARCH 0xEC
#define W1_CONVERT_TEMP 0x44
#define W1_SKIP_ROM 0xCC
#define W1_READ_SCRATCHPAD 0xBE
@@ -60,7 +57,7 @@ struct w1_reg_num
#define W1_READ_PSUPPLY 0xB4
#define W1_MATCH_ROM 0x55
-#define W1_SLAVE_ACTIVE (1<<0)
+#define W1_SLAVE_ACTIVE 0
struct w1_slave
{
@@ -145,8 +142,8 @@ struct w1_bus_master
*/
u8 (*reset_bus)(void *);
- /** Really nice hardware can handles the ROM searches */
- void (*search)(void *, w1_slave_found_callback);
+ /** Really nice hardware can handles the different types of ROM search */
+ void (*search)(void *, u8, w1_slave_found_callback);
};
#define W1_MASTER_NEED_EXIT 0
@@ -173,19 +170,30 @@ struct w1_master
long flags;
struct task_struct *thread;
- struct semaphore mutex;
+ struct mutex mutex;
struct device_driver *driver;
struct device dev;
struct w1_bus_master *bus_master;
- u32 seq, groups;
- struct sock *nls;
+ u32 seq;
};
int w1_create_master_attributes(struct w1_master *);
-void w1_search(struct w1_master *dev, w1_slave_found_callback cb);
+void w1_search(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb);
+void w1_search_devices(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb);
+struct w1_slave *w1_search_slave(struct w1_reg_num *id);
+void w1_search_process(struct w1_master *dev, u8 search_type);
+struct w1_master *w1_search_master_id(u32 id);
+
+u8 w1_triplet(struct w1_master *dev, int bdir);
+void w1_write_8(struct w1_master *, u8);
+int w1_reset_bus(struct w1_master *);
+u8 w1_calc_crc8(u8 *, int);
+void w1_write_block(struct w1_master *, const u8 *, int);
+u8 w1_read_block(struct w1_master *, u8 *, int);
+int w1_reset_select_slave(struct w1_slave *sl);
static inline struct w1_slave* dev_to_w1_slave(struct device *dev)
{
@@ -202,15 +210,14 @@ static inline struct w1_master* dev_to_w1_master(struct device *dev)
return container_of(dev, struct w1_master, dev);
}
+extern struct device_driver w1_master_driver;
+extern struct device w1_master_device;
extern int w1_max_slave_count;
extern int w1_max_slave_ttl;
-extern spinlock_t w1_mlock;
extern struct list_head w1_masters;
-extern struct device_driver w1_master_driver;
-extern struct device w1_master_device;
+extern struct mutex w1_mlock;
-int w1_process(void *data);
-void w1_reconnect_slaves(struct w1_family *f);
+extern int w1_process(void *);
#endif /* __KERNEL__ */
diff --git a/drivers/w1/w1_family.c b/drivers/w1/w1_family.c
index 0e32c11..a3c95bd 100644
--- a/drivers/w1/w1_family.c
+++ b/drivers/w1/w1_family.c
@@ -107,6 +107,12 @@ struct w1_family * w1_family_registered(u8 fid)
return (ret) ? f : NULL;
}
+static void __w1_family_put(struct w1_family *f)
+{
+ if (atomic_dec_and_test(&f->refcnt))
+ f->need_exit = 1;
+}
+
void w1_family_put(struct w1_family *f)
{
spin_lock(&w1_flock);
@@ -114,19 +120,14 @@ void w1_family_put(struct w1_family *f)
spin_unlock(&w1_flock);
}
-void __w1_family_put(struct w1_family *f)
-{
- if (atomic_dec_and_test(&f->refcnt))
- f->need_exit = 1;
-}
-
+#if 0
void w1_family_get(struct w1_family *f)
{
spin_lock(&w1_flock);
__w1_family_get(f);
spin_unlock(&w1_flock);
-
}
+#endif /* 0 */
void __w1_family_get(struct w1_family *f)
{
@@ -135,8 +136,5 @@ void __w1_family_get(struct w1_family *f)
smp_mb__after_atomic_inc();
}
-EXPORT_SYMBOL(w1_family_get);
-EXPORT_SYMBOL(w1_family_put);
-EXPORT_SYMBOL(w1_family_registered);
EXPORT_SYMBOL(w1_unregister_family);
EXPORT_SYMBOL(w1_register_family);
diff --git a/drivers/w1/w1_family.h b/drivers/w1/w1_family.h
index 2ca0489..1e2ac40 100644
--- a/drivers/w1/w1_family.h
+++ b/drivers/w1/w1_family.h
@@ -57,12 +57,11 @@ struct w1_family
extern spinlock_t w1_flock;
-void w1_family_get(struct w1_family *);
void w1_family_put(struct w1_family *);
void __w1_family_get(struct w1_family *);
-void __w1_family_put(struct w1_family *);
struct w1_family * w1_family_registered(u8);
void w1_unregister_family(struct w1_family *);
int w1_register_family(struct w1_family *);
+void w1_reconnect_slaves(struct w1_family *f);
#endif /* __W1_FAMILY_H */
diff --git a/drivers/w1/w1_int.c b/drivers/w1/w1_int.c
index 68565aa..357a2e0 100644
--- a/drivers/w1/w1_int.c
+++ b/drivers/w1/w1_int.c
@@ -65,7 +65,7 @@ static struct w1_master * w1_alloc_dev(u32 id, int slave_count, int slave_ttl,
atomic_set(&dev->refcnt, 2);
INIT_LIST_HEAD(&dev->slist);
- init_MUTEX(&dev->mutex);
+ mutex_init(&dev->mutex);
memcpy(&dev->dev, device, sizeof(struct device));
snprintf(dev->dev.bus_id, sizeof(dev->dev.bus_id),
@@ -74,16 +74,11 @@ static struct w1_master * w1_alloc_dev(u32 id, int slave_count, int slave_ttl,
dev->driver = driver;
- dev->groups = 1;
dev->seq = 1;
- dev_init_netlink(dev);
err = device_register(&dev->dev);
if (err) {
printk(KERN_ERR "Failed to register master device. err=%d\n", err);
-
- dev_fini_netlink(dev);
-
memset(dev, 0, sizeof(struct w1_master));
kfree(dev);
dev = NULL;
@@ -131,12 +126,12 @@ int w1_add_master_device(struct w1_bus_master *master)
dev->initialized = 1;
- spin_lock(&w1_mlock);
+ mutex_lock(&w1_mlock);
list_add(&dev->w1_master_entry, &w1_masters);
- spin_unlock(&w1_mlock);
+ mutex_unlock(&w1_mlock);
+ memset(&msg, 0, sizeof(msg));
msg.id.mst.id = dev->id;
- msg.id.mst.pid = dev->thread->pid;
msg.type = W1_MASTER_ADD;
w1_netlink_send(dev, &msg);
@@ -153,7 +148,6 @@ err_out_free_dev:
void __w1_remove_master_device(struct w1_master *dev)
{
struct w1_netlink_msg msg;
- pid_t pid = dev->thread->pid;
set_bit(W1_MASTER_NEED_EXIT, &dev->flags);
kthread_stop(dev->thread);
@@ -166,8 +160,8 @@ void __w1_remove_master_device(struct w1_master *dev)
flush_signals(current);
}
+ memset(&msg, 0, sizeof(msg));
msg.id.mst.id = dev->id;
- msg.id.mst.pid = pid;
msg.type = W1_MASTER_REMOVE;
w1_netlink_send(dev, &msg);
diff --git a/drivers/w1/w1_io.c b/drivers/w1/w1_io.c
index f7f7e8b..30b6fbf 100644
--- a/drivers/w1/w1_io.c
+++ b/drivers/w1/w1_io.c
@@ -23,10 +23,10 @@
#include <linux/delay.h>
#include <linux/moduleparam.h>
+#include <linux/module.h>
#include "w1.h"
#include "w1_log.h"
-#include "w1_io.h"
static int w1_delay_parm = 1;
module_param_named(delay_coef, w1_delay_parm, int, 0);
@@ -50,7 +50,7 @@ static u8 w1_crc8_table[] = {
116, 42, 200, 150, 21, 75, 169, 247, 182, 232, 10, 84, 215, 137, 107, 53
};
-void w1_delay(unsigned long tm)
+static void w1_delay(unsigned long tm)
{
udelay(tm * w1_delay_parm);
}
@@ -61,7 +61,7 @@ static u8 w1_read_bit(struct w1_master *dev);
/**
* Generates a write-0 or write-1 cycle and samples the level.
*/
-u8 w1_touch_bit(struct w1_master *dev, int bit)
+static u8 w1_touch_bit(struct w1_master *dev, int bit)
{
if (dev->bus_master->touch_bit)
return dev->bus_master->touch_bit(dev->bus_master->data, bit);
@@ -108,6 +108,7 @@ void w1_write_8(struct w1_master *dev, u8 byte)
for (i = 0; i < 8; ++i)
w1_touch_bit(dev, (byte >> i) & 0x1);
}
+EXPORT_SYMBOL_GPL(w1_write_8);
/**
@@ -176,7 +177,7 @@ u8 w1_triplet(struct w1_master *dev, int bdir)
* @param dev the master device
* @return the byte read
*/
-u8 w1_read_8(struct w1_master * dev)
+static u8 w1_read_8(struct w1_master * dev)
{
int i;
u8 res = 0;
@@ -208,6 +209,7 @@ void w1_write_block(struct w1_master *dev, const u8 *buf, int len)
for (i = 0; i < len; ++i)
w1_write_8(dev, buf[i]);
}
+EXPORT_SYMBOL_GPL(w1_write_block);
/**
* Reads a series of bytes.
@@ -232,6 +234,7 @@ u8 w1_read_block(struct w1_master *dev, u8 *buf, int len)
return ret;
}
+EXPORT_SYMBOL_GPL(w1_read_block);
/**
* Issues a reset bus sequence.
@@ -257,6 +260,7 @@ int w1_reset_bus(struct w1_master *dev)
return result;
}
+EXPORT_SYMBOL_GPL(w1_reset_bus);
u8 w1_calc_crc8(u8 * data, int len)
{
@@ -267,14 +271,15 @@ u8 w1_calc_crc8(u8 * data, int len)
return crc;
}
+EXPORT_SYMBOL_GPL(w1_calc_crc8);
-void w1_search_devices(struct w1_master *dev, w1_slave_found_callback cb)
+void w1_search_devices(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb)
{
dev->attempts++;
if (dev->bus_master->search)
- dev->bus_master->search(dev->bus_master->data, cb);
+ dev->bus_master->search(dev->bus_master->data, search_type, cb);
else
- w1_search(dev, cb);
+ w1_search(dev, search_type, cb);
}
/**
@@ -299,14 +304,4 @@ int w1_reset_select_slave(struct w1_slave *sl)
}
return 0;
}
-
-EXPORT_SYMBOL(w1_touch_bit);
-EXPORT_SYMBOL(w1_write_8);
-EXPORT_SYMBOL(w1_read_8);
-EXPORT_SYMBOL(w1_reset_bus);
-EXPORT_SYMBOL(w1_calc_crc8);
-EXPORT_SYMBOL(w1_delay);
-EXPORT_SYMBOL(w1_read_block);
-EXPORT_SYMBOL(w1_write_block);
-EXPORT_SYMBOL(w1_search_devices);
-EXPORT_SYMBOL(w1_reset_select_slave);
+EXPORT_SYMBOL_GPL(w1_reset_select_slave);
diff --git a/drivers/w1/w1_io.h b/drivers/w1/w1_io.h
index 2328601..9a76d2a 100644
--- a/drivers/w1/w1_io.h
+++ b/drivers/w1/w1_io.h
@@ -24,11 +24,8 @@
#include "w1.h"
-void w1_delay(unsigned long);
-u8 w1_touch_bit(struct w1_master *, int);
u8 w1_triplet(struct w1_master *dev, int bdir);
void w1_write_8(struct w1_master *, u8);
-u8 w1_read_8(struct w1_master *);
int w1_reset_bus(struct w1_master *);
u8 w1_calc_crc8(u8 *, int);
void w1_write_block(struct w1_master *, const u8 *, int);
diff --git a/drivers/w1/w1_netlink.c b/drivers/w1/w1_netlink.c
index 328645d..65c5ebd 100644
--- a/drivers/w1/w1_netlink.c
+++ b/drivers/w1/w1_netlink.c
@@ -21,72 +21,225 @@
#include <linux/skbuff.h>
#include <linux/netlink.h>
+#include <linux/connector.h>
#include "w1.h"
#include "w1_log.h"
#include "w1_netlink.h"
-#ifndef NETLINK_DISABLED
+#if defined(CONFIG_W1_CON) && (defined(CONFIG_CONNECTOR) || (defined(CONFIG_CONNECTOR_MODULE) && defined(CONFIG_W1_MODULE)))
void w1_netlink_send(struct w1_master *dev, struct w1_netlink_msg *msg)
{
- unsigned int size;
- struct sk_buff *skb;
- struct w1_netlink_msg *data;
- struct nlmsghdr *nlh;
+ char buf[sizeof(struct cn_msg) + sizeof(struct w1_netlink_msg)];
+ struct cn_msg *m = (struct cn_msg *)buf;
+ struct w1_netlink_msg *w = (struct w1_netlink_msg *)(m+1);
- if (!dev->nls)
- return;
+ memset(buf, 0, sizeof(buf));
- size = NLMSG_SPACE(sizeof(struct w1_netlink_msg));
+ m->id.idx = CN_W1_IDX;
+ m->id.val = CN_W1_VAL;
- skb = alloc_skb(size, GFP_ATOMIC);
- if (!skb) {
- dev_err(&dev->dev, "skb_alloc() failed.\n");
- return;
- }
+ m->seq = dev->seq++;
+ m->len = sizeof(struct w1_netlink_msg);
+
+ memcpy(w, msg, sizeof(struct w1_netlink_msg));
+
+ cn_netlink_send(m, 0, GFP_KERNEL);
+}
+
+static int w1_process_command_master(struct w1_master *dev, struct cn_msg *msg,
+ struct w1_netlink_msg *hdr, struct w1_netlink_cmd *cmd)
+{
+ dev_dbg(&dev->dev, "%s: %s: cmd=%02x, len=%u.\n",
+ __func__, dev->name, cmd->cmd, cmd->len);
+
+ if (cmd->cmd != W1_CMD_SEARCH && cmd->cmd != W1_CMD_ALARM_SEARCH)
+ return -EINVAL;
+
+ w1_search_process(dev, (cmd->cmd == W1_CMD_ALARM_SEARCH)?W1_ALARM_SEARCH:W1_SEARCH);
+ return 0;
+}
+
+static int w1_send_read_reply(struct w1_slave *sl, struct cn_msg *msg,
+ struct w1_netlink_msg *hdr, struct w1_netlink_cmd *cmd)
+{
+ void *data;
+ struct w1_netlink_msg *h;
+ struct w1_netlink_cmd *c;
+ struct cn_msg *cm;
+ int err;
+
+ data = kzalloc(sizeof(struct cn_msg) +
+ sizeof(struct w1_netlink_msg) +
+ sizeof(struct w1_netlink_cmd) +
+ cmd->len, GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ cm = (struct cn_msg *)(data);
+ h = (struct w1_netlink_msg *)(cm + 1);
+ c = (struct w1_netlink_cmd *)(h + 1);
+
+ memcpy(cm, msg, sizeof(struct cn_msg));
+ memcpy(h, hdr, sizeof(struct w1_netlink_msg));
+ memcpy(c, cmd, sizeof(struct w1_netlink_cmd));
- nlh = NLMSG_PUT(skb, 0, dev->seq++, NLMSG_DONE, size - sizeof(*nlh));
+ cm->ack = msg->seq+1;
+ cm->len = sizeof(struct w1_netlink_msg) + sizeof(struct w1_netlink_cmd) + cmd->len;
- data = (struct w1_netlink_msg *)NLMSG_DATA(nlh);
+ h->len = sizeof(struct w1_netlink_cmd) + cmd->len;
- memcpy(data, msg, sizeof(struct w1_netlink_msg));
+ memcpy(c->data, cmd->data, c->len);
- NETLINK_CB(skb).dst_group = dev->groups;
- netlink_broadcast(dev->nls, skb, 0, dev->groups, GFP_ATOMIC);
+ err = cn_netlink_send(cm, 0, GFP_KERNEL);
-nlmsg_failure:
- return;
+ kfree(data);
+
+ return err;
}
-int dev_init_netlink(struct w1_master *dev)
+static int w1_process_command_slave(struct w1_slave *sl, struct cn_msg *msg,
+ struct w1_netlink_msg *hdr, struct w1_netlink_cmd *cmd)
{
- dev->nls = netlink_kernel_create(NETLINK_W1, 1, NULL, THIS_MODULE);
- if (!dev->nls) {
- printk(KERN_ERR "Failed to create new netlink socket(%u) for w1 master %s.\n",
- NETLINK_W1, dev->dev.bus_id);
+ int err = 0;
+
+ dev_dbg(&sl->master->dev, "%s: %02x.%012llx.%02x: cmd=%02x, len=%u.\n",
+ __func__, sl->reg_num.family, (unsigned long long)sl->reg_num.id, sl->reg_num.crc,
+ cmd->cmd, cmd->len);
+
+ switch (cmd->cmd) {
+ case W1_CMD_READ:
+ w1_read_block(sl->master, cmd->data, cmd->len);
+ w1_send_read_reply(sl, msg, hdr, cmd);
+ break;
+ case W1_CMD_WRITE:
+ w1_write_block(sl->master, cmd->data, cmd->len);
+ break;
+ case W1_CMD_SEARCH:
+ case W1_CMD_ALARM_SEARCH:
+ w1_search_process(sl->master,
+ (cmd->cmd == W1_CMD_ALARM_SEARCH)?W1_ALARM_SEARCH:W1_SEARCH);
+ break;
+ default:
+ err = -1;
+ break;
}
- return 0;
+ return err;
}
-void dev_fini_netlink(struct w1_master *dev)
+static void w1_cn_callback(void *data)
{
- if (dev->nls && dev->nls->sk_socket)
- sock_release(dev->nls->sk_socket);
+ struct cn_msg *msg = data;
+ struct w1_netlink_msg *m = (struct w1_netlink_msg *)(msg + 1);
+ struct w1_netlink_cmd *cmd;
+ struct w1_slave *sl;
+ struct w1_master *dev;
+ int err = 0;
+
+ while (msg->len && !err) {
+ struct w1_reg_num id;
+ u16 mlen = m->len;
+ u8 *cmd_data = m->data;
+
+ dev = NULL;
+ sl = NULL;
+
+ memcpy(&id, m->id.id, sizeof(id));
+#if 0
+ printk("%s: %02x.%012llx.%02x: type=%02x, len=%u.\n",
+ __func__, id.family, (unsigned long long)id.id, id.crc, m->type, m->len);
+#endif
+ if (m->len + sizeof(struct w1_netlink_msg) > msg->len) {
+ err = -E2BIG;
+ break;
+ }
+
+ if (!mlen)
+ goto out_cont;
+
+ if (m->type == W1_MASTER_CMD) {
+ dev = w1_search_master_id(m->id.mst.id);
+ } else if (m->type == W1_SLAVE_CMD) {
+ sl = w1_search_slave(&id);
+ if (sl)
+ dev = sl->master;
+ }
+
+ if (!dev) {
+ err = -ENODEV;
+ goto out_cont;
+ }
+
+ mutex_lock(&dev->mutex);
+
+ if (sl && w1_reset_select_slave(sl)) {
+ err = -ENODEV;
+ goto out_up;
+ }
+
+ while (mlen) {
+ cmd = (struct w1_netlink_cmd *)cmd_data;
+
+ if (cmd->len + sizeof(struct w1_netlink_cmd) > mlen) {
+ err = -E2BIG;
+ break;
+ }
+
+ if (sl)
+ w1_process_command_slave(sl, msg, m, cmd);
+ else
+ w1_process_command_master(dev, msg, m, cmd);
+
+ cmd_data += cmd->len + sizeof(struct w1_netlink_cmd);
+ mlen -= cmd->len + sizeof(struct w1_netlink_cmd);
+ }
+out_up:
+ atomic_dec(&dev->refcnt);
+ if (sl)
+ atomic_dec(&sl->refcnt);
+ mutex_unlock(&dev->mutex);
+out_cont:
+ msg->len -= sizeof(struct w1_netlink_msg) + m->len;
+ m = (struct w1_netlink_msg *)(((u8 *)m) + sizeof(struct w1_netlink_msg) + m->len);
+
+ /*
+ * Let's allow requests for nonexisting devices.
+ */
+ if (err == -ENODEV)
+ err = 0;
+ }
+#if 0
+ if (err) {
+ printk("%s: malformed message. Dropping.\n", __func__);
+ }
+#endif
}
-#else
-#warning Netlink support is disabled. Please compile with NET support enabled.
+int w1_init_netlink(void)
+{
+ struct cb_id w1_id = {.idx = CN_W1_IDX, .val = CN_W1_VAL};
+
+ return cn_add_callback(&w1_id, "w1", &w1_cn_callback);
+}
+
+void w1_fini_netlink(void)
+{
+ struct cb_id w1_id = {.idx = CN_W1_IDX, .val = CN_W1_VAL};
+
+ cn_del_callback(&w1_id);
+}
+#else
void w1_netlink_send(struct w1_master *dev, struct w1_netlink_msg *msg)
{
}
-int dev_init_netlink(struct w1_master *dev)
+int w1_init_netlink(void)
{
return 0;
}
-void dev_fini_netlink(struct w1_master *dev)
+void w1_fini_netlink(void)
{
}
#endif
diff --git a/drivers/w1/w1_netlink.h b/drivers/w1/w1_netlink.h
index eb0c8b3..56122b9 100644
--- a/drivers/w1/w1_netlink.h
+++ b/drivers/w1/w1_netlink.h
@@ -23,6 +23,7 @@
#define __W1_NETLINK_H
#include <asm/types.h>
+#include <linux/connector.h>
#include "w1.h"
@@ -31,29 +32,43 @@ enum w1_netlink_message_types {
W1_SLAVE_REMOVE,
W1_MASTER_ADD,
W1_MASTER_REMOVE,
+ W1_MASTER_CMD,
+ W1_SLAVE_CMD,
};
struct w1_netlink_msg
{
__u8 type;
- __u8 reserved[3];
- union
- {
- struct w1_reg_num id;
- __u64 w1_id;
- struct
- {
+ __u8 reserved;
+ __u16 len;
+ union {
+ __u8 id[8];
+ struct w1_mst {
__u32 id;
- __u32 pid;
+ __u32 res;
} mst;
} id;
+ __u8 data[0];
+};
+
+#define W1_CMD_READ 0x0
+#define W1_CMD_WRITE 0x1
+#define W1_CMD_SEARCH 0x2
+#define W1_CMD_ALARM_SEARCH 0x3
+
+struct w1_netlink_cmd
+{
+ __u8 cmd;
+ __u8 res;
+ __u16 len;
+ __u8 data[0];
};
#ifdef __KERNEL__
void w1_netlink_send(struct w1_master *, struct w1_netlink_msg *);
-int dev_init_netlink(struct w1_master *dev);
-void dev_fini_netlink(struct w1_master *dev);
+int w1_init_netlink(void);
+void w1_fini_netlink(void);
#endif /* __KERNEL__ */
#endif /* __W1_NETLINK_H */
diff --git a/include/linux/connector.h b/include/linux/connector.h
index ad1a22c..4c02119 100644
--- a/include/linux/connector.h
+++ b/include/linux/connector.h
@@ -34,8 +34,11 @@
#define CN_VAL_PROC 0x1
#define CN_IDX_CIFS 0x2
#define CN_VAL_CIFS 0x1
+#define CN_W1_IDX 0x3 /* w1 communication */
+#define CN_W1_VAL 0x1
-#define CN_NETLINK_USERS 1
+
+#define CN_NETLINK_USERS 4
/*
* Maximum connector's message size.
diff --git a/include/linux/netlink.h b/include/linux/netlink.h
index 87b8a57..855b446 100644
--- a/include/linux/netlink.h
+++ b/include/linux/netlink.h
@@ -5,7 +5,7 @@
#include <linux/types.h>
#define NETLINK_ROUTE 0 /* Routing/device hook */
-#define NETLINK_W1 1 /* 1-wire subsystem */
+#define NETLINK_UNUSED 1 /* Unused number */
#define NETLINK_USERSOCK 2 /* Reserved for user mode socket protocols */
#define NETLINK_FIREWALL 3 /* Firewalling hook */
#define NETLINK_INET_DIAG 4 /* INET socket monitoring */
generated by cgit v1.1 at 2024-10-30 18:02:48 +0000