diff options
Diffstat (limited to 'arch/alpha/kernel/core_polaris.c')
-rw-r--r-- | arch/alpha/kernel/core_polaris.c | 203 |
1 files changed, 203 insertions, 0 deletions
diff --git a/arch/alpha/kernel/core_polaris.c b/arch/alpha/kernel/core_polaris.c new file mode 100644 index 0000000..277674a --- /dev/null +++ b/arch/alpha/kernel/core_polaris.c @@ -0,0 +1,203 @@ +/* + * linux/arch/alpha/kernel/core_polaris.c + * + * POLARIS chip-specific code + */ + +#define __EXTERN_INLINE inline +#include <asm/io.h> +#include <asm/core_polaris.h> +#undef __EXTERN_INLINE + +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/sched.h> +#include <linux/init.h> + +#include <asm/ptrace.h> + +#include "proto.h" +#include "pci_impl.h" + +/* + * BIOS32-style PCI interface: + */ + +#define DEBUG_CONFIG 0 + +#if DEBUG_CONFIG +# define DBG_CFG(args) printk args +#else +# define DBG_CFG(args) +#endif + + +/* + * Given a bus, device, and function number, compute resulting + * configuration space address. This is fairly straightforward + * on POLARIS, since the chip itself generates Type 0 or Type 1 + * cycles automatically depending on the bus number (Bus 0 is + * hardwired to Type 0, all others are Type 1. Peer bridges + * are not supported). + * + * All types: + * + * 3 3 3 3|3 3 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 + * 9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0 + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + * |1|1|1|1|1|0|0|1|1|1|1|1|1|1|1|0|B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|x|x| + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + * + * 23:16 bus number (8 bits = 128 possible buses) + * 15:11 Device number (5 bits) + * 10:8 function number + * 7:2 register number + * + * Notes: + * The function number selects which function of a multi-function device + * (e.g., scsi and ethernet). + * + * The register selects a DWORD (32 bit) register offset. Hence it + * doesn't get shifted by 2 bits as we want to "drop" the bottom two + * bits. + */ + +static int +mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where, + unsigned long *pci_addr, u8 *type1) +{ + u8 bus = pbus->number; + + *type1 = (bus == 0) ? 0 : 1; + *pci_addr = (bus << 16) | (device_fn << 8) | (where) | + POLARIS_DENSE_CONFIG_BASE; + + DBG_CFG(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x," + " returning address 0x%p\n" + bus, device_fn, where, *pci_addr)); + + return 0; +} + +static int +polaris_read_config(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 *value) +{ + unsigned long addr; + unsigned char type1; + + if (mk_conf_addr(bus, devfn, where, &addr, &type1)) + return PCIBIOS_DEVICE_NOT_FOUND; + + switch (size) { + case 1: + *value = __kernel_ldbu(*(vucp)addr); + break; + case 2: + *value = __kernel_ldwu(*(vusp)addr); + break; + case 4: + *value = *(vuip)addr; + break; + } + + return PCIBIOS_SUCCESSFUL; +} + + +static int +polaris_write_config(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 value) +{ + unsigned long addr; + unsigned char type1; + + if (mk_conf_addr(bus, devfn, where, &addr, &type1)) + return PCIBIOS_DEVICE_NOT_FOUND; + + switch (size) { + case 1: + __kernel_stb(value, *(vucp)addr); + mb(); + __kernel_ldbu(*(vucp)addr); + break; + case 2: + __kernel_stw(value, *(vusp)addr); + mb(); + __kernel_ldwu(*(vusp)addr); + break; + case 4: + *(vuip)addr = value; + mb(); + *(vuip)addr; + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +struct pci_ops polaris_pci_ops = +{ + .read = polaris_read_config, + .write = polaris_write_config, +}; + +void __init +polaris_init_arch(void) +{ + struct pci_controller *hose; + + /* May need to initialize error reporting (see PCICTL0/1), but + * for now assume that the firmware has done the right thing + * already. + */ +#if 0 + printk("polaris_init_arch(): trusting firmware for setup\n"); +#endif + + /* + * Create our single hose. + */ + + pci_isa_hose = hose = alloc_pci_controller(); + hose->io_space = &ioport_resource; + hose->mem_space = &iomem_resource; + hose->index = 0; + + hose->sparse_mem_base = 0; + hose->dense_mem_base = POLARIS_DENSE_MEM_BASE - IDENT_ADDR; + hose->sparse_io_base = 0; + hose->dense_io_base = POLARIS_DENSE_IO_BASE - IDENT_ADDR; + + hose->sg_isa = hose->sg_pci = NULL; + + /* The I/O window is fixed at 2G @ 2G. */ + __direct_map_base = 0x80000000; + __direct_map_size = 0x80000000; +} + +static inline void +polaris_pci_clr_err(void) +{ + *(vusp)POLARIS_W_STATUS; + /* Write 1's to settable bits to clear errors */ + *(vusp)POLARIS_W_STATUS = 0x7800; + mb(); + *(vusp)POLARIS_W_STATUS; +} + +void +polaris_machine_check(unsigned long vector, unsigned long la_ptr, + struct pt_regs * regs) +{ + /* Clear the error before any reporting. */ + mb(); + mb(); + draina(); + polaris_pci_clr_err(); + wrmces(0x7); + mb(); + + process_mcheck_info(vector, la_ptr, regs, "POLARIS", + mcheck_expected(0)); +} |