diff options
Diffstat (limited to 'arch/arm/mach-ep93xx')
21 files changed, 196 insertions, 1139 deletions
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig index 3a08b18..97a2493 100644 --- a/arch/arm/mach-ep93xx/Kconfig +++ b/arch/arm/mach-ep93xx/Kconfig @@ -182,6 +182,13 @@ config MACH_TS72XX Say 'Y' here if you want your kernel to support the Technologic Systems TS-72xx board. +config MACH_VISION_EP9307 + bool "Support Vision Engraving Systems EP9307 SoM" + depends on EP93XX_SDCE0_PHYS_OFFSET + help + Say 'Y' here if you want your kernel to support the + Vision Engraving Systems EP9307 SoM. + choice prompt "Select a UART for early kernel messages" diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile index 33ee2c8..574209d 100644 --- a/arch/arm/mach-ep93xx/Makefile +++ b/arch/arm/mach-ep93xx/Makefile @@ -1,11 +1,13 @@ # # Makefile for the linux kernel. # -obj-y := core.o clock.o dma-m2p.o gpio.o +obj-y := core.o clock.o obj-m := obj-n := obj- := +obj-$(CONFIG_EP93XX_DMA) += dma.o + obj-$(CONFIG_MACH_ADSSPHERE) += adssphere.o obj-$(CONFIG_MACH_EDB93XX) += edb93xx.o obj-$(CONFIG_MACH_GESBC9312) += gesbc9312.o @@ -13,3 +15,4 @@ obj-$(CONFIG_MACH_MICRO9) += micro9.o obj-$(CONFIG_MACH_SIM_ONE) += simone.o obj-$(CONFIG_MACH_SNAPPER_CL15) += snappercl15.o obj-$(CONFIG_MACH_TS72XX) += ts72xx.o +obj-$(CONFIG_MACH_VISION_EP9307)+= vision_ep9307.o diff --git a/arch/arm/mach-ep93xx/Makefile.boot b/arch/arm/mach-ep93xx/Makefile.boot index 0ad33f1..d3113a7 100644 --- a/arch/arm/mach-ep93xx/Makefile.boot +++ b/arch/arm/mach-ep93xx/Makefile.boot @@ -1,14 +1,14 @@ - zreladdr-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) := 0x00008000 + zreladdr-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) += 0x00008000 params_phys-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) := 0x00000100 - zreladdr-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) := 0xc0008000 + zreladdr-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) += 0xc0008000 params_phys-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) := 0xc0000100 - zreladdr-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET) := 0xd0008000 + zreladdr-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET) += 0xd0008000 params_phys-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET) := 0xd0000100 - zreladdr-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET) := 0xe0008000 + zreladdr-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET) += 0xe0008000 params_phys-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET) := 0xe0000100 - zreladdr-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET) := 0xf0008000 + zreladdr-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET) += 0xf0008000 params_phys-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET) := 0xf0000100 diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c index 61b98ce..0713448 100644 --- a/arch/arm/mach-ep93xx/adssphere.c +++ b/arch/arm/mach-ep93xx/adssphere.c @@ -33,7 +33,7 @@ static void __init adssphere_init_machine(void) MACHINE_START(ADSSPHERE, "ADS Sphere board") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 6659a0d..2432a6b 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -33,11 +33,13 @@ #include <linux/i2c.h> #include <linux/i2c-gpio.h> #include <linux/spi/spi.h> +#include <linux/export.h> #include <mach/hardware.h> #include <mach/fb.h> #include <mach/ep93xx_keypad.h> #include <mach/ep93xx_spi.h> +#include <mach/gpio-ep93xx.h> #include <asm/mach/map.h> #include <asm/mach/time.h> @@ -174,14 +176,10 @@ struct sys_timer ep93xx_timer = { /************************************************************************* * EP93xx IRQ handling *************************************************************************/ -extern void ep93xx_gpio_init_irq(void); - void __init ep93xx_init_irq(void) { vic_init(EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0); vic_init(EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0); - - ep93xx_gpio_init_irq(); } @@ -241,6 +239,24 @@ unsigned int ep93xx_chip_revision(void) } /************************************************************************* + * EP93xx GPIO + *************************************************************************/ +static struct resource ep93xx_gpio_resource[] = { + { + .start = EP93XX_GPIO_PHYS_BASE, + .end = EP93XX_GPIO_PHYS_BASE + 0xcc - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device ep93xx_gpio_device = { + .name = "gpio-ep93xx", + .id = -1, + .num_resources = ARRAY_SIZE(ep93xx_gpio_resource), + .resource = ep93xx_gpio_resource, +}; + +/************************************************************************* * EP93xx peripheral handling *************************************************************************/ #define EP93XX_UART_MCR_OFFSET (0x0100) @@ -492,11 +508,15 @@ static struct resource ep93xx_spi_resources[] = { }, }; +static u64 ep93xx_spi_dma_mask = DMA_BIT_MASK(32); + static struct platform_device ep93xx_spi_device = { .name = "ep93xx-spi", .id = 0, .dev = { - .platform_data = &ep93xx_spi_master_data, + .platform_data = &ep93xx_spi_master_data, + .coherent_dma_mask = DMA_BIT_MASK(32), + .dma_mask = &ep93xx_spi_dma_mask, }, .num_resources = ARRAY_SIZE(ep93xx_spi_resources), .resource = ep93xx_spi_resources, @@ -870,14 +890,13 @@ void __init ep93xx_register_ac97(void) platform_device_register(&ep93xx_pcm_device); } -extern void ep93xx_gpio_init(void); - void __init ep93xx_init_devices(void) { /* Disallow access to MaverickCrunch initially */ ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA); - ep93xx_gpio_init(); + /* Get the GPIO working early, other devices need it */ + platform_device_register(&ep93xx_gpio_device); amba_device_register(&uart1_device, &iomem_resource); amba_device_register(&uart2_device, &iomem_resource); diff --git a/arch/arm/mach-ep93xx/dma-m2p.c b/arch/arm/mach-ep93xx/dma-m2p.c deleted file mode 100644 index a696d35..0000000 --- a/arch/arm/mach-ep93xx/dma-m2p.c +++ /dev/null @@ -1,411 +0,0 @@ -/* - * arch/arm/mach-ep93xx/dma-m2p.c - * M2P DMA handling for Cirrus EP93xx chips. - * - * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> - * Copyright (C) 2006 Applied Data Systems - * - * Copyright (C) 2009 Ryan Mallon <ryan@bluewatersys.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ - -/* - * On the EP93xx chip the following peripherals my be allocated to the 10 - * Memory to Internal Peripheral (M2P) channels (5 transmit + 5 receive). - * - * I2S contains 3 Tx and 3 Rx DMA Channels - * AAC contains 3 Tx and 3 Rx DMA Channels - * UART1 contains 1 Tx and 1 Rx DMA Channels - * UART2 contains 1 Tx and 1 Rx DMA Channels - * UART3 contains 1 Tx and 1 Rx DMA Channels - * IrDA contains 1 Tx and 1 Rx DMA Channels - * - * SSP and IDE use the Memory to Memory (M2M) channels and are not covered - * with this implementation. - */ - -#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt - -#include <linux/kernel.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <linux/io.h> - -#include <mach/dma.h> -#include <mach/hardware.h> - -#define M2P_CONTROL 0x00 -#define M2P_CONTROL_STALL_IRQ_EN (1 << 0) -#define M2P_CONTROL_NFB_IRQ_EN (1 << 1) -#define M2P_CONTROL_ERROR_IRQ_EN (1 << 3) -#define M2P_CONTROL_ENABLE (1 << 4) -#define M2P_INTERRUPT 0x04 -#define M2P_INTERRUPT_STALL (1 << 0) -#define M2P_INTERRUPT_NFB (1 << 1) -#define M2P_INTERRUPT_ERROR (1 << 3) -#define M2P_PPALLOC 0x08 -#define M2P_STATUS 0x0c -#define M2P_REMAIN 0x14 -#define M2P_MAXCNT0 0x20 -#define M2P_BASE0 0x24 -#define M2P_MAXCNT1 0x30 -#define M2P_BASE1 0x34 - -#define STATE_IDLE 0 /* Channel is inactive. */ -#define STATE_STALL 1 /* Channel is active, no buffers pending. */ -#define STATE_ON 2 /* Channel is active, one buffer pending. */ -#define STATE_NEXT 3 /* Channel is active, two buffers pending. */ - -struct m2p_channel { - char *name; - void __iomem *base; - int irq; - - struct clk *clk; - spinlock_t lock; - - void *client; - unsigned next_slot:1; - struct ep93xx_dma_buffer *buffer_xfer; - struct ep93xx_dma_buffer *buffer_next; - struct list_head buffers_pending; -}; - -static struct m2p_channel m2p_rx[] = { - {"m2p1", EP93XX_DMA_BASE + 0x0040, IRQ_EP93XX_DMAM2P1}, - {"m2p3", EP93XX_DMA_BASE + 0x00c0, IRQ_EP93XX_DMAM2P3}, - {"m2p5", EP93XX_DMA_BASE + 0x0200, IRQ_EP93XX_DMAM2P5}, - {"m2p7", EP93XX_DMA_BASE + 0x0280, IRQ_EP93XX_DMAM2P7}, - {"m2p9", EP93XX_DMA_BASE + 0x0300, IRQ_EP93XX_DMAM2P9}, - {NULL}, -}; - -static struct m2p_channel m2p_tx[] = { - {"m2p0", EP93XX_DMA_BASE + 0x0000, IRQ_EP93XX_DMAM2P0}, - {"m2p2", EP93XX_DMA_BASE + 0x0080, IRQ_EP93XX_DMAM2P2}, - {"m2p4", EP93XX_DMA_BASE + 0x0240, IRQ_EP93XX_DMAM2P4}, - {"m2p6", EP93XX_DMA_BASE + 0x02c0, IRQ_EP93XX_DMAM2P6}, - {"m2p8", EP93XX_DMA_BASE + 0x0340, IRQ_EP93XX_DMAM2P8}, - {NULL}, -}; - -static void feed_buf(struct m2p_channel *ch, struct ep93xx_dma_buffer *buf) -{ - if (ch->next_slot == 0) { - writel(buf->size, ch->base + M2P_MAXCNT0); - writel(buf->bus_addr, ch->base + M2P_BASE0); - } else { - writel(buf->size, ch->base + M2P_MAXCNT1); - writel(buf->bus_addr, ch->base + M2P_BASE1); - } - ch->next_slot ^= 1; -} - -static void choose_buffer_xfer(struct m2p_channel *ch) -{ - struct ep93xx_dma_buffer *buf; - - ch->buffer_xfer = NULL; - if (!list_empty(&ch->buffers_pending)) { - buf = list_entry(ch->buffers_pending.next, - struct ep93xx_dma_buffer, list); - list_del(&buf->list); - feed_buf(ch, buf); - ch->buffer_xfer = buf; - } -} - -static void choose_buffer_next(struct m2p_channel *ch) -{ - struct ep93xx_dma_buffer *buf; - - ch->buffer_next = NULL; - if (!list_empty(&ch->buffers_pending)) { - buf = list_entry(ch->buffers_pending.next, - struct ep93xx_dma_buffer, list); - list_del(&buf->list); - feed_buf(ch, buf); - ch->buffer_next = buf; - } -} - -static inline void m2p_set_control(struct m2p_channel *ch, u32 v) -{ - /* - * The control register must be read immediately after being written so - * that the internal state machine is correctly updated. See the ep93xx - * users' guide for details. - */ - writel(v, ch->base + M2P_CONTROL); - readl(ch->base + M2P_CONTROL); -} - -static inline int m2p_channel_state(struct m2p_channel *ch) -{ - return (readl(ch->base + M2P_STATUS) >> 4) & 0x3; -} - -static irqreturn_t m2p_irq(int irq, void *dev_id) -{ - struct m2p_channel *ch = dev_id; - struct ep93xx_dma_m2p_client *cl; - u32 irq_status, v; - int error = 0; - - cl = ch->client; - - spin_lock(&ch->lock); - irq_status = readl(ch->base + M2P_INTERRUPT); - - if (irq_status & M2P_INTERRUPT_ERROR) { - writel(M2P_INTERRUPT_ERROR, ch->base + M2P_INTERRUPT); - error = 1; - } - - if ((irq_status & (M2P_INTERRUPT_STALL | M2P_INTERRUPT_NFB)) == 0) { - spin_unlock(&ch->lock); - return IRQ_NONE; - } - - switch (m2p_channel_state(ch)) { - case STATE_IDLE: - pr_crit("dma interrupt without a dma buffer\n"); - BUG(); - break; - - case STATE_STALL: - cl->buffer_finished(cl->cookie, ch->buffer_xfer, 0, error); - if (ch->buffer_next != NULL) { - cl->buffer_finished(cl->cookie, ch->buffer_next, - 0, error); - } - choose_buffer_xfer(ch); - choose_buffer_next(ch); - if (ch->buffer_xfer != NULL) - cl->buffer_started(cl->cookie, ch->buffer_xfer); - break; - - case STATE_ON: - cl->buffer_finished(cl->cookie, ch->buffer_xfer, 0, error); - ch->buffer_xfer = ch->buffer_next; - choose_buffer_next(ch); - cl->buffer_started(cl->cookie, ch->buffer_xfer); - break; - - case STATE_NEXT: - pr_crit("dma interrupt while next\n"); - BUG(); - break; - } - - v = readl(ch->base + M2P_CONTROL) & ~(M2P_CONTROL_STALL_IRQ_EN | - M2P_CONTROL_NFB_IRQ_EN); - if (ch->buffer_xfer != NULL) - v |= M2P_CONTROL_STALL_IRQ_EN; - if (ch->buffer_next != NULL) - v |= M2P_CONTROL_NFB_IRQ_EN; - m2p_set_control(ch, v); - - spin_unlock(&ch->lock); - return IRQ_HANDLED; -} - -static struct m2p_channel *find_free_channel(struct ep93xx_dma_m2p_client *cl) -{ - struct m2p_channel *ch; - int i; - - if (cl->flags & EP93XX_DMA_M2P_RX) - ch = m2p_rx; - else - ch = m2p_tx; - - for (i = 0; ch[i].base; i++) { - struct ep93xx_dma_m2p_client *client; - - client = ch[i].client; - if (client != NULL) { - int port; - - port = cl->flags & EP93XX_DMA_M2P_PORT_MASK; - if (port == (client->flags & - EP93XX_DMA_M2P_PORT_MASK)) { - pr_warning("DMA channel already used by %s\n", - cl->name ? : "unknown client"); - return ERR_PTR(-EBUSY); - } - } - } - - for (i = 0; ch[i].base; i++) { - if (ch[i].client == NULL) - return ch + i; - } - - pr_warning("No free DMA channel for %s\n", - cl->name ? : "unknown client"); - return ERR_PTR(-ENODEV); -} - -static void channel_enable(struct m2p_channel *ch) -{ - struct ep93xx_dma_m2p_client *cl = ch->client; - u32 v; - - clk_enable(ch->clk); - - v = cl->flags & EP93XX_DMA_M2P_PORT_MASK; - writel(v, ch->base + M2P_PPALLOC); - - v = cl->flags & EP93XX_DMA_M2P_ERROR_MASK; - v |= M2P_CONTROL_ENABLE | M2P_CONTROL_ERROR_IRQ_EN; - m2p_set_control(ch, v); -} - -static void channel_disable(struct m2p_channel *ch) -{ - u32 v; - - v = readl(ch->base + M2P_CONTROL); - v &= ~(M2P_CONTROL_STALL_IRQ_EN | M2P_CONTROL_NFB_IRQ_EN); - m2p_set_control(ch, v); - - while (m2p_channel_state(ch) >= STATE_ON) - cpu_relax(); - - m2p_set_control(ch, 0x0); - - while (m2p_channel_state(ch) == STATE_STALL) - cpu_relax(); - - clk_disable(ch->clk); -} - -int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *cl) -{ - struct m2p_channel *ch; - int err; - - ch = find_free_channel(cl); - if (IS_ERR(ch)) - return PTR_ERR(ch); - - err = request_irq(ch->irq, m2p_irq, 0, cl->name ? : "dma-m2p", ch); - if (err) - return err; - - ch->client = cl; - ch->next_slot = 0; - ch->buffer_xfer = NULL; - ch->buffer_next = NULL; - INIT_LIST_HEAD(&ch->buffers_pending); - - cl->channel = ch; - - channel_enable(ch); - - return 0; -} -EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_client_register); - -void ep93xx_dma_m2p_client_unregister(struct ep93xx_dma_m2p_client *cl) -{ - struct m2p_channel *ch = cl->channel; - - channel_disable(ch); - free_irq(ch->irq, ch); - ch->client = NULL; -} -EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_client_unregister); - -void ep93xx_dma_m2p_submit(struct ep93xx_dma_m2p_client *cl, - struct ep93xx_dma_buffer *buf) -{ - struct m2p_channel *ch = cl->channel; - unsigned long flags; - u32 v; - - spin_lock_irqsave(&ch->lock, flags); - v = readl(ch->base + M2P_CONTROL); - if (ch->buffer_xfer == NULL) { - ch->buffer_xfer = buf; - feed_buf(ch, buf); - cl->buffer_started(cl->cookie, buf); - - v |= M2P_CONTROL_STALL_IRQ_EN; - m2p_set_control(ch, v); - - } else if (ch->buffer_next == NULL) { - ch->buffer_next = buf; - feed_buf(ch, buf); - - v |= M2P_CONTROL_NFB_IRQ_EN; - m2p_set_control(ch, v); - } else { - list_add_tail(&buf->list, &ch->buffers_pending); - } - spin_unlock_irqrestore(&ch->lock, flags); -} -EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_submit); - -void ep93xx_dma_m2p_submit_recursive(struct ep93xx_dma_m2p_client *cl, - struct ep93xx_dma_buffer *buf) -{ - struct m2p_channel *ch = cl->channel; - - list_add_tail(&buf->list, &ch->buffers_pending); -} -EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_submit_recursive); - -void ep93xx_dma_m2p_flush(struct ep93xx_dma_m2p_client *cl) -{ - struct m2p_channel *ch = cl->channel; - - channel_disable(ch); - ch->next_slot = 0; - ch->buffer_xfer = NULL; - ch->buffer_next = NULL; - INIT_LIST_HEAD(&ch->buffers_pending); - channel_enable(ch); -} -EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_flush); - -static int init_channel(struct m2p_channel *ch) -{ - ch->clk = clk_get(NULL, ch->name); - if (IS_ERR(ch->clk)) - return PTR_ERR(ch->clk); - - spin_lock_init(&ch->lock); - ch->client = NULL; - - return 0; -} - -static int __init ep93xx_dma_m2p_init(void) -{ - int i; - int ret; - - for (i = 0; m2p_rx[i].base; i++) { - ret = init_channel(m2p_rx + i); - if (ret) - return ret; - } - - for (i = 0; m2p_tx[i].base; i++) { - ret = init_channel(m2p_tx + i); - if (ret) - return ret; - } - - pr_info("M2P DMA subsystem initialized\n"); - return 0; -} -arch_initcall(ep93xx_dma_m2p_init); diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index 9969bb1..70ef8c5 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -37,6 +37,7 @@ #include <mach/hardware.h> #include <mach/fb.h> #include <mach/ep93xx_spi.h> +#include <mach/gpio-ep93xx.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -159,6 +160,11 @@ static void __init edb93xx_register_spi(void) /************************************************************************* * EDB93xx I2S *************************************************************************/ +static struct platform_device edb93xx_audio_device = { + .name = "edb93xx-audio", + .id = -1, +}; + static int __init edb93xx_has_audio(void) { return (machine_is_edb9301() || machine_is_edb9302() || @@ -170,6 +176,7 @@ static void __init edb93xx_register_i2s(void) { if (edb93xx_has_audio()) { ep93xx_register_i2s(); + platform_device_register(&edb93xx_audio_device); } } @@ -240,7 +247,7 @@ static void __init edb93xx_init_machine(void) #ifdef CONFIG_MACH_EDB9301 MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board") /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */ - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, @@ -251,7 +258,7 @@ MACHINE_END #ifdef CONFIG_MACH_EDB9302 MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board") /* Maintainer: George Kashperko <george@chas.com.ua> */ - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, @@ -262,7 +269,7 @@ MACHINE_END #ifdef CONFIG_MACH_EDB9302A MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, @@ -273,7 +280,7 @@ MACHINE_END #ifdef CONFIG_MACH_EDB9307 MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board") /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */ - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, @@ -284,7 +291,7 @@ MACHINE_END #ifdef CONFIG_MACH_EDB9307A MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board") /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */ - .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, @@ -295,7 +302,7 @@ MACHINE_END #ifdef CONFIG_MACH_EDB9312 MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board") /* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */ - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, @@ -306,7 +313,7 @@ MACHINE_END #ifdef CONFIG_MACH_EDB9315 MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, @@ -317,7 +324,7 @@ MACHINE_END #ifdef CONFIG_MACH_EDB9315A MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c index 9bd3152..45ee205 100644 --- a/arch/arm/mach-ep93xx/gesbc9312.c +++ b/arch/arm/mach-ep93xx/gesbc9312.c @@ -33,7 +33,7 @@ static void __init gesbc9312_init_machine(void) MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c deleted file mode 100644 index 415dce3..0000000 --- a/arch/arm/mach-ep93xx/gpio.c +++ /dev/null @@ -1,410 +0,0 @@ -/* - * linux/arch/arm/mach-ep93xx/gpio.c - * - * Generic EP93xx GPIO handling - * - * Copyright (c) 2008 Ryan Mallon <ryan@bluewatersys.com> - * - * Based on code originally from: - * linux/arch/arm/mach-ep93xx/core.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/seq_file.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/irq.h> - -#include <mach/hardware.h> - -/************************************************************************* - * Interrupt handling for EP93xx on-chip GPIOs - *************************************************************************/ -static unsigned char gpio_int_unmasked[3]; -static unsigned char gpio_int_enabled[3]; -static unsigned char gpio_int_type1[3]; -static unsigned char gpio_int_type2[3]; -static unsigned char gpio_int_debounce[3]; - -/* Port ordering is: A B F */ -static const u8 int_type1_register_offset[3] = { 0x90, 0xac, 0x4c }; -static const u8 int_type2_register_offset[3] = { 0x94, 0xb0, 0x50 }; -static const u8 eoi_register_offset[3] = { 0x98, 0xb4, 0x54 }; -static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x58 }; -static const u8 int_debounce_register_offset[3] = { 0xa8, 0xc4, 0x64 }; - -static void ep93xx_gpio_update_int_params(unsigned port) -{ - BUG_ON(port > 2); - - __raw_writeb(0, EP93XX_GPIO_REG(int_en_register_offset[port])); - - __raw_writeb(gpio_int_type2[port], - EP93XX_GPIO_REG(int_type2_register_offset[port])); - - __raw_writeb(gpio_int_type1[port], - EP93XX_GPIO_REG(int_type1_register_offset[port])); - - __raw_writeb(gpio_int_unmasked[port] & gpio_int_enabled[port], - EP93XX_GPIO_REG(int_en_register_offset[port])); -} - -static inline void ep93xx_gpio_int_mask(unsigned line) -{ - gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7)); -} - -static void ep93xx_gpio_int_debounce(unsigned int irq, bool enable) -{ - int line = irq_to_gpio(irq); - int port = line >> 3; - int port_mask = 1 << (line & 7); - - if (enable) - gpio_int_debounce[port] |= port_mask; - else - gpio_int_debounce[port] &= ~port_mask; - - __raw_writeb(gpio_int_debounce[port], - EP93XX_GPIO_REG(int_debounce_register_offset[port])); -} - -static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - unsigned char status; - int i; - - status = __raw_readb(EP93XX_GPIO_A_INT_STATUS); - for (i = 0; i < 8; i++) { - if (status & (1 << i)) { - int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_A(0)) + i; - generic_handle_irq(gpio_irq); - } - } - - status = __raw_readb(EP93XX_GPIO_B_INT_STATUS); - for (i = 0; i < 8; i++) { - if (status & (1 << i)) { - int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i; - generic_handle_irq(gpio_irq); - } - } -} - -static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - /* - * map discontiguous hw irq range to continuous sw irq range: - * - * IRQ_EP93XX_GPIO{0..7}MUX -> gpio_to_irq(EP93XX_GPIO_LINE_F({0..7}) - */ - int port_f_idx = ((irq + 1) & 7) ^ 4; /* {19..22,47..50} -> {0..7} */ - int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_F(0)) + port_f_idx; - - generic_handle_irq(gpio_irq); -} - -static void ep93xx_gpio_irq_ack(struct irq_data *d) -{ - int line = irq_to_gpio(d->irq); - int port = line >> 3; - int port_mask = 1 << (line & 7); - - if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) { - gpio_int_type2[port] ^= port_mask; /* switch edge direction */ - ep93xx_gpio_update_int_params(port); - } - - __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port])); -} - -static void ep93xx_gpio_irq_mask_ack(struct irq_data *d) -{ - int line = irq_to_gpio(d->irq); - int port = line >> 3; - int port_mask = 1 << (line & 7); - - if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) - gpio_int_type2[port] ^= port_mask; /* switch edge direction */ - - gpio_int_unmasked[port] &= ~port_mask; - ep93xx_gpio_update_int_params(port); - - __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port])); -} - -static void ep93xx_gpio_irq_mask(struct irq_data *d) -{ - int line = irq_to_gpio(d->irq); - int port = line >> 3; - - gpio_int_unmasked[port] &= ~(1 << (line & 7)); - ep93xx_gpio_update_int_params(port); -} - -static void ep93xx_gpio_irq_unmask(struct irq_data *d) -{ - int line = irq_to_gpio(d->irq); - int port = line >> 3; - - gpio_int_unmasked[port] |= 1 << (line & 7); - ep93xx_gpio_update_int_params(port); -} - -/* - * gpio_int_type1 controls whether the interrupt is level (0) or - * edge (1) triggered, while gpio_int_type2 controls whether it - * triggers on low/falling (0) or high/rising (1). - */ -static int ep93xx_gpio_irq_type(struct irq_data *d, unsigned int type) -{ - const int gpio = irq_to_gpio(d->irq); - const int port = gpio >> 3; - const int port_mask = 1 << (gpio & 7); - irq_flow_handler_t handler; - - gpio_direction_input(gpio); - - switch (type) { - case IRQ_TYPE_EDGE_RISING: - gpio_int_type1[port] |= port_mask; - gpio_int_type2[port] |= port_mask; - handler = handle_edge_irq; - break; - case IRQ_TYPE_EDGE_FALLING: - gpio_int_type1[port] |= port_mask; - gpio_int_type2[port] &= ~port_mask; - handler = handle_edge_irq; - break; - case IRQ_TYPE_LEVEL_HIGH: - gpio_int_type1[port] &= ~port_mask; - gpio_int_type2[port] |= port_mask; - handler = handle_level_irq; - break; - case IRQ_TYPE_LEVEL_LOW: - gpio_int_type1[port] &= ~port_mask; - gpio_int_type2[port] &= ~port_mask; - handler = handle_level_irq; - break; - case IRQ_TYPE_EDGE_BOTH: - gpio_int_type1[port] |= port_mask; - /* set initial polarity based on current input level */ - if (gpio_get_value(gpio)) - gpio_int_type2[port] &= ~port_mask; /* falling */ - else - gpio_int_type2[port] |= port_mask; /* rising */ - handler = handle_edge_irq; - break; - default: - pr_err("failed to set irq type %d for gpio %d\n", type, gpio); - return -EINVAL; - } - - __irq_set_handler_locked(d->irq, handler); - - gpio_int_enabled[port] |= port_mask; - - ep93xx_gpio_update_int_params(port); - - return 0; -} - -static struct irq_chip ep93xx_gpio_irq_chip = { - .name = "GPIO", - .irq_ack = ep93xx_gpio_irq_ack, - .irq_mask_ack = ep93xx_gpio_irq_mask_ack, - .irq_mask = ep93xx_gpio_irq_mask, - .irq_unmask = ep93xx_gpio_irq_unmask, - .irq_set_type = ep93xx_gpio_irq_type, -}; - -void __init ep93xx_gpio_init_irq(void) -{ - int gpio_irq; - - for (gpio_irq = gpio_to_irq(0); - gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) { - irq_set_chip_and_handler(gpio_irq, &ep93xx_gpio_irq_chip, - handle_level_irq); - set_irq_flags(gpio_irq, IRQF_VALID); - } - - irq_set_chained_handler(IRQ_EP93XX_GPIO_AB, - ep93xx_gpio_ab_irq_handler); - irq_set_chained_handler(IRQ_EP93XX_GPIO0MUX, - ep93xx_gpio_f_irq_handler); - irq_set_chained_handler(IRQ_EP93XX_GPIO1MUX, - ep93xx_gpio_f_irq_handler); - irq_set_chained_handler(IRQ_EP93XX_GPIO2MUX, - ep93xx_gpio_f_irq_handler); - irq_set_chained_handler(IRQ_EP93XX_GPIO3MUX, - ep93xx_gpio_f_irq_handler); - irq_set_chained_handler(IRQ_EP93XX_GPIO4MUX, - ep93xx_gpio_f_irq_handler); - irq_set_chained_handler(IRQ_EP93XX_GPIO5MUX, - ep93xx_gpio_f_irq_handler); - irq_set_chained_handler(IRQ_EP93XX_GPIO6MUX, - ep93xx_gpio_f_irq_handler); - irq_set_chained_handler(IRQ_EP93XX_GPIO7MUX, - ep93xx_gpio_f_irq_handler); -} - - -/************************************************************************* - * gpiolib interface for EP93xx on-chip GPIOs - *************************************************************************/ -struct ep93xx_gpio_chip { - struct gpio_chip chip; - - void __iomem *data_reg; - void __iomem *data_dir_reg; -}; - -#define to_ep93xx_gpio_chip(c) container_of(c, struct ep93xx_gpio_chip, chip) - -static int ep93xx_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -{ - struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); - unsigned long flags; - u8 v; - - local_irq_save(flags); - v = __raw_readb(ep93xx_chip->data_dir_reg); - v &= ~(1 << offset); - __raw_writeb(v, ep93xx_chip->data_dir_reg); - local_irq_restore(flags); - - return 0; -} - -static int ep93xx_gpio_direction_output(struct gpio_chip *chip, - unsigned offset, int val) -{ - struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); - unsigned long flags; - int line; - u8 v; - - local_irq_save(flags); - - /* Set the value */ - v = __raw_readb(ep93xx_chip->data_reg); - if (val) - v |= (1 << offset); - else - v &= ~(1 << offset); - __raw_writeb(v, ep93xx_chip->data_reg); - - /* Drive as an output */ - line = chip->base + offset; - if (line <= EP93XX_GPIO_LINE_MAX_IRQ) { - /* Ports A/B/F */ - ep93xx_gpio_int_mask(line); - ep93xx_gpio_update_int_params(line >> 3); - } - - v = __raw_readb(ep93xx_chip->data_dir_reg); - v |= (1 << offset); - __raw_writeb(v, ep93xx_chip->data_dir_reg); - - local_irq_restore(flags); - - return 0; -} - -static int ep93xx_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); - - return !!(__raw_readb(ep93xx_chip->data_reg) & (1 << offset)); -} - -static void ep93xx_gpio_set(struct gpio_chip *chip, unsigned offset, int val) -{ - struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); - unsigned long flags; - u8 v; - - local_irq_save(flags); - v = __raw_readb(ep93xx_chip->data_reg); - if (val) - v |= (1 << offset); - else - v &= ~(1 << offset); - __raw_writeb(v, ep93xx_chip->data_reg); - local_irq_restore(flags); -} - -static int ep93xx_gpio_set_debounce(struct gpio_chip *chip, - unsigned offset, unsigned debounce) -{ - int gpio = chip->base + offset; - int irq = gpio_to_irq(gpio); - - if (irq < 0) - return -EINVAL; - - ep93xx_gpio_int_debounce(irq, debounce ? true : false); - - return 0; -} - -#define EP93XX_GPIO_BANK(name, dr, ddr, base_gpio) \ - { \ - .chip = { \ - .label = name, \ - .direction_input = ep93xx_gpio_direction_input, \ - .direction_output = ep93xx_gpio_direction_output, \ - .get = ep93xx_gpio_get, \ - .set = ep93xx_gpio_set, \ - .base = base_gpio, \ - .ngpio = 8, \ - }, \ - .data_reg = EP93XX_GPIO_REG(dr), \ - .data_dir_reg = EP93XX_GPIO_REG(ddr), \ - } - -static struct ep93xx_gpio_chip ep93xx_gpio_banks[] = { - EP93XX_GPIO_BANK("A", 0x00, 0x10, 0), - EP93XX_GPIO_BANK("B", 0x04, 0x14, 8), - EP93XX_GPIO_BANK("C", 0x08, 0x18, 40), - EP93XX_GPIO_BANK("D", 0x0c, 0x1c, 24), - EP93XX_GPIO_BANK("E", 0x20, 0x24, 32), - EP93XX_GPIO_BANK("F", 0x30, 0x34, 16), - EP93XX_GPIO_BANK("G", 0x38, 0x3c, 48), - EP93XX_GPIO_BANK("H", 0x40, 0x44, 56), -}; - -void __init ep93xx_gpio_init(void) -{ - int i; - - /* Set Ports C, D, E, G, and H for GPIO use */ - ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS | - EP93XX_SYSCON_DEVCFG_GONK | - EP93XX_SYSCON_DEVCFG_EONIDE | - EP93XX_SYSCON_DEVCFG_GONIDE | - EP93XX_SYSCON_DEVCFG_HONIDE); - - for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++) { - struct gpio_chip *chip = &ep93xx_gpio_banks[i].chip; - - /* - * Ports A, B, and F support input debouncing when - * used as interrupts. - */ - if (!strcmp(chip->label, "A") || - !strcmp(chip->label, "B") || - !strcmp(chip->label, "F")) - chip->set_debounce = ep93xx_gpio_set_debounce; - - gpiochip_add(chip); - } -} diff --git a/arch/arm/mach-ep93xx/include/mach/clkdev.h b/arch/arm/mach-ep93xx/include/mach/clkdev.h deleted file mode 100644 index 50cb991..0000000 --- a/arch/arm/mach-ep93xx/include/mach/clkdev.h +++ /dev/null @@ -1,11 +0,0 @@ -/* - * arch/arm/mach-ep93xx/include/mach/clkdev.h - */ - -#ifndef __ASM_MACH_CLKDEV_H -#define __ASM_MACH_CLKDEV_H - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do { } while (0) - -#endif diff --git a/arch/arm/mach-ep93xx/include/mach/debug-macro.S b/arch/arm/mach-ep93xx/include/mach/debug-macro.S index b25bc907..af54e43 100644 --- a/arch/arm/mach-ep93xx/include/mach/debug-macro.S +++ b/arch/arm/mach-ep93xx/include/mach/debug-macro.S @@ -11,7 +11,7 @@ */ #include <mach/ep93xx-regs.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =EP93XX_APB_PHYS_BASE @ Physical base ldr \rv, =EP93XX_APB_VIRT_BASE @ virtual base orr \rp, \rp, #0x000c0000 diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h index 5e31b2b..46d4d87 100644 --- a/arch/arm/mach-ep93xx/include/mach/dma.h +++ b/arch/arm/mach-ep93xx/include/mach/dma.h @@ -1,149 +1,93 @@ -/** - * DOC: EP93xx DMA M2P memory to peripheral and peripheral to memory engine - * - * The EP93xx DMA M2P subsystem handles DMA transfers between memory and - * peripherals. DMA M2P channels are available for audio, UARTs and IrDA. - * See chapter 10 of the EP93xx users guide for full details on the DMA M2P - * engine. - * - * See sound/soc/ep93xx/ep93xx-pcm.c for an example use of the DMA M2P code. - * - */ - #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H -#include <linux/list.h> #include <linux/types.h> +#include <linux/dmaengine.h> +#include <linux/dma-mapping.h> -/** - * struct ep93xx_dma_buffer - Information about a buffer to be transferred - * using the DMA M2P engine +/* + * M2P channels. * - * @list: Entry in DMA buffer list - * @bus_addr: Physical address of the buffer - * @size: Size of the buffer in bytes + * Note that these values are also directly used for setting the PPALLOC + * register. */ -struct ep93xx_dma_buffer { - struct list_head list; - u32 bus_addr; - u16 size; -}; +#define EP93XX_DMA_I2S1 0 +#define EP93XX_DMA_I2S2 1 +#define EP93XX_DMA_AAC1 2 +#define EP93XX_DMA_AAC2 3 +#define EP93XX_DMA_AAC3 4 +#define EP93XX_DMA_I2S3 5 +#define EP93XX_DMA_UART1 6 +#define EP93XX_DMA_UART2 7 +#define EP93XX_DMA_UART3 8 +#define EP93XX_DMA_IRDA 9 +/* M2M channels */ +#define EP93XX_DMA_SSP 10 +#define EP93XX_DMA_IDE 11 /** - * struct ep93xx_dma_m2p_client - Information about a DMA M2P client - * - * @name: Unique name for this client - * @flags: Client flags - * @cookie: User data to pass to callback functions - * @buffer_started: Non NULL function to call when a transfer is started. - * The arguments are the user data cookie and the DMA - * buffer which is starting. - * @buffer_finished: Non NULL function to call when a transfer is completed. - * The arguments are the user data cookie, the DMA buffer - * which has completed, and a boolean flag indicating if - * the transfer had an error. + * struct ep93xx_dma_data - configuration data for the EP93xx dmaengine + * @port: peripheral which is requesting the channel + * @direction: TX/RX channel + * @name: optional name for the channel, this is displayed in /proc/interrupts + * + * This information is passed as private channel parameter in a filter + * function. Note that this is only needed for slave/cyclic channels. For + * memcpy channels %NULL data should be passed. */ -struct ep93xx_dma_m2p_client { - char *name; - u8 flags; - void *cookie; - void (*buffer_started)(void *cookie, - struct ep93xx_dma_buffer *buf); - void (*buffer_finished)(void *cookie, - struct ep93xx_dma_buffer *buf, - int bytes, int error); - - /* private: Internal use only */ - void *channel; +struct ep93xx_dma_data { + int port; + enum dma_data_direction direction; + const char *name; }; -/* DMA M2P ports */ -#define EP93XX_DMA_M2P_PORT_I2S1 0x00 -#define EP93XX_DMA_M2P_PORT_I2S2 0x01 -#define EP93XX_DMA_M2P_PORT_AAC1 0x02 -#define EP93XX_DMA_M2P_PORT_AAC2 0x03 -#define EP93XX_DMA_M2P_PORT_AAC3 0x04 -#define EP93XX_DMA_M2P_PORT_I2S3 0x05 -#define EP93XX_DMA_M2P_PORT_UART1 0x06 -#define EP93XX_DMA_M2P_PORT_UART2 0x07 -#define EP93XX_DMA_M2P_PORT_UART3 0x08 -#define EP93XX_DMA_M2P_PORT_IRDA 0x09 -#define EP93XX_DMA_M2P_PORT_MASK 0x0f - -/* DMA M2P client flags */ -#define EP93XX_DMA_M2P_TX 0x00 /* Memory to peripheral */ -#define EP93XX_DMA_M2P_RX 0x10 /* Peripheral to memory */ - -/* - * DMA M2P client error handling flags. See the EP93xx users guide - * documentation on the DMA M2P CONTROL register for more details - */ -#define EP93XX_DMA_M2P_ABORT_ON_ERROR 0x20 /* Abort on peripheral error */ -#define EP93XX_DMA_M2P_IGNORE_ERROR 0x40 /* Ignore peripheral errors */ -#define EP93XX_DMA_M2P_ERROR_MASK 0x60 /* Mask of error bits */ - /** - * ep93xx_dma_m2p_client_register - Register a client with the DMA M2P - * subsystem - * - * @m2p: Client information to register - * returns 0 on success - * - * The DMA M2P subsystem allocates a channel and an interrupt line for the DMA - * client + * struct ep93xx_dma_chan_data - platform specific data for a DMA channel + * @name: name of the channel, used for getting the right clock for the channel + * @base: mapped registers + * @irq: interrupt number used by this channel */ -int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *m2p); +struct ep93xx_dma_chan_data { + const char *name; + void __iomem *base; + int irq; +}; /** - * ep93xx_dma_m2p_client_unregister - Unregister a client from the DMA M2P - * subsystem - * - * @m2p: Client to unregister + * struct ep93xx_dma_platform_data - platform data for the dmaengine driver + * @channels: array of channels which are passed to the driver + * @num_channels: number of channels in the array * - * Any transfers currently in progress will be completed in hardware, but - * ignored in software. + * This structure is passed to the DMA engine driver via platform data. For + * M2P channels, contract is that even channels are for TX and odd for RX. + * There is no requirement for the M2M channels. */ -void ep93xx_dma_m2p_client_unregister(struct ep93xx_dma_m2p_client *m2p); +struct ep93xx_dma_platform_data { + struct ep93xx_dma_chan_data *channels; + size_t num_channels; +}; -/** - * ep93xx_dma_m2p_submit - Submit a DMA M2P transfer - * - * @m2p: DMA Client to submit the transfer on - * @buf: DMA Buffer to submit - * - * If the current or next transfer positions are free on the M2P client then - * the transfer is started immediately. If not, the transfer is added to the - * list of pending transfers. This function must not be called from the - * buffer_finished callback for an M2P channel. - * - */ -void ep93xx_dma_m2p_submit(struct ep93xx_dma_m2p_client *m2p, - struct ep93xx_dma_buffer *buf); +static inline bool ep93xx_dma_chan_is_m2p(struct dma_chan *chan) +{ + return !strcmp(dev_name(chan->device->dev), "ep93xx-dma-m2p"); +} /** - * ep93xx_dma_m2p_submit_recursive - Put a DMA transfer on the pending list - * for an M2P channel + * ep93xx_dma_chan_direction - returns direction the channel can be used + * @chan: channel * - * @m2p: DMA Client to submit the transfer on - * @buf: DMA Buffer to submit - * - * This function must only be called from the buffer_finished callback for an - * M2P channel. It is commonly used to add the next transfer in a chained list - * of DMA transfers. + * This function can be used in filter functions to find out whether the + * channel supports given DMA direction. Only M2P channels have such + * limitation, for M2M channels the direction is configurable. */ -void ep93xx_dma_m2p_submit_recursive(struct ep93xx_dma_m2p_client *m2p, - struct ep93xx_dma_buffer *buf); +static inline enum dma_data_direction +ep93xx_dma_chan_direction(struct dma_chan *chan) +{ + if (!ep93xx_dma_chan_is_m2p(chan)) + return DMA_NONE; -/** - * ep93xx_dma_m2p_flush - Flush all pending transfers on a DMA M2P client - * - * @m2p: DMA client to flush transfers on - * - * Any transfers currently in progress will be completed in hardware, but - * ignored in software. - * - */ -void ep93xx_dma_m2p_flush(struct ep93xx_dma_m2p_client *m2p); + /* even channels are for TX, odd for RX */ + return (chan->chan_id % 2 == 0) ? DMA_TO_DEVICE : DMA_FROM_DEVICE; +} #endif /* __ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h index 9ac4d10..c4a7b84 100644 --- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h +++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h @@ -98,6 +98,7 @@ #define EP93XX_SECURITY_BASE EP93XX_APB_IOMEM(0x00030000) +#define EP93XX_GPIO_PHYS_BASE EP93XX_APB_PHYS(0x00040000) #define EP93XX_GPIO_BASE EP93XX_APB_IOMEM(0x00040000) #define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x)) #define EP93XX_GPIO_F_INT_STATUS EP93XX_GPIO_REG(0x5c) diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h b/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h index 0a37961..9bb63ac 100644 --- a/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h +++ b/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h @@ -7,9 +7,11 @@ struct spi_device; * struct ep93xx_spi_info - EP93xx specific SPI descriptor * @num_chipselect: number of chip selects on this board, must be * at least one + * @use_dma: use DMA for the transfers */ struct ep93xx_spi_info { int num_chipselect; + bool use_dma; }; /** diff --git a/arch/arm/mach-ep93xx/include/mach/gpio.h b/arch/arm/mach-ep93xx/include/mach/gpio.h index c57152c..40a8c17 100644 --- a/arch/arm/mach-ep93xx/include/mach/gpio.h +++ b/arch/arm/mach-ep93xx/include/mach/gpio.h @@ -1,120 +1 @@ -/* - * arch/arm/mach-ep93xx/include/mach/gpio.h - */ - -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H - -/* GPIO port A. */ -#define EP93XX_GPIO_LINE_A(x) ((x) + 0) -#define EP93XX_GPIO_LINE_EGPIO0 EP93XX_GPIO_LINE_A(0) -#define EP93XX_GPIO_LINE_EGPIO1 EP93XX_GPIO_LINE_A(1) -#define EP93XX_GPIO_LINE_EGPIO2 EP93XX_GPIO_LINE_A(2) -#define EP93XX_GPIO_LINE_EGPIO3 EP93XX_GPIO_LINE_A(3) -#define EP93XX_GPIO_LINE_EGPIO4 EP93XX_GPIO_LINE_A(4) -#define EP93XX_GPIO_LINE_EGPIO5 EP93XX_GPIO_LINE_A(5) -#define EP93XX_GPIO_LINE_EGPIO6 EP93XX_GPIO_LINE_A(6) -#define EP93XX_GPIO_LINE_EGPIO7 EP93XX_GPIO_LINE_A(7) - -/* GPIO port B. */ -#define EP93XX_GPIO_LINE_B(x) ((x) + 8) -#define EP93XX_GPIO_LINE_EGPIO8 EP93XX_GPIO_LINE_B(0) -#define EP93XX_GPIO_LINE_EGPIO9 EP93XX_GPIO_LINE_B(1) -#define EP93XX_GPIO_LINE_EGPIO10 EP93XX_GPIO_LINE_B(2) -#define EP93XX_GPIO_LINE_EGPIO11 EP93XX_GPIO_LINE_B(3) -#define EP93XX_GPIO_LINE_EGPIO12 EP93XX_GPIO_LINE_B(4) -#define EP93XX_GPIO_LINE_EGPIO13 EP93XX_GPIO_LINE_B(5) -#define EP93XX_GPIO_LINE_EGPIO14 EP93XX_GPIO_LINE_B(6) -#define EP93XX_GPIO_LINE_EGPIO15 EP93XX_GPIO_LINE_B(7) - -/* GPIO port C. */ -#define EP93XX_GPIO_LINE_C(x) ((x) + 40) -#define EP93XX_GPIO_LINE_ROW0 EP93XX_GPIO_LINE_C(0) -#define EP93XX_GPIO_LINE_ROW1 EP93XX_GPIO_LINE_C(1) -#define EP93XX_GPIO_LINE_ROW2 EP93XX_GPIO_LINE_C(2) -#define EP93XX_GPIO_LINE_ROW3 EP93XX_GPIO_LINE_C(3) -#define EP93XX_GPIO_LINE_ROW4 EP93XX_GPIO_LINE_C(4) -#define EP93XX_GPIO_LINE_ROW5 EP93XX_GPIO_LINE_C(5) -#define EP93XX_GPIO_LINE_ROW6 EP93XX_GPIO_LINE_C(6) -#define EP93XX_GPIO_LINE_ROW7 EP93XX_GPIO_LINE_C(7) - -/* GPIO port D. */ -#define EP93XX_GPIO_LINE_D(x) ((x) + 24) -#define EP93XX_GPIO_LINE_COL0 EP93XX_GPIO_LINE_D(0) -#define EP93XX_GPIO_LINE_COL1 EP93XX_GPIO_LINE_D(1) -#define EP93XX_GPIO_LINE_COL2 EP93XX_GPIO_LINE_D(2) -#define EP93XX_GPIO_LINE_COL3 EP93XX_GPIO_LINE_D(3) -#define EP93XX_GPIO_LINE_COL4 EP93XX_GPIO_LINE_D(4) -#define EP93XX_GPIO_LINE_COL5 EP93XX_GPIO_LINE_D(5) -#define EP93XX_GPIO_LINE_COL6 EP93XX_GPIO_LINE_D(6) -#define EP93XX_GPIO_LINE_COL7 EP93XX_GPIO_LINE_D(7) - -/* GPIO port E. */ -#define EP93XX_GPIO_LINE_E(x) ((x) + 32) -#define EP93XX_GPIO_LINE_GRLED EP93XX_GPIO_LINE_E(0) -#define EP93XX_GPIO_LINE_RDLED EP93XX_GPIO_LINE_E(1) -#define EP93XX_GPIO_LINE_DIORn EP93XX_GPIO_LINE_E(2) -#define EP93XX_GPIO_LINE_IDECS1n EP93XX_GPIO_LINE_E(3) -#define EP93XX_GPIO_LINE_IDECS2n EP93XX_GPIO_LINE_E(4) -#define EP93XX_GPIO_LINE_IDEDA0 EP93XX_GPIO_LINE_E(5) -#define EP93XX_GPIO_LINE_IDEDA1 EP93XX_GPIO_LINE_E(6) -#define EP93XX_GPIO_LINE_IDEDA2 EP93XX_GPIO_LINE_E(7) - -/* GPIO port F. */ -#define EP93XX_GPIO_LINE_F(x) ((x) + 16) -#define EP93XX_GPIO_LINE_WP EP93XX_GPIO_LINE_F(0) -#define EP93XX_GPIO_LINE_MCCD1 EP93XX_GPIO_LINE_F(1) -#define EP93XX_GPIO_LINE_MCCD2 EP93XX_GPIO_LINE_F(2) -#define EP93XX_GPIO_LINE_MCBVD1 EP93XX_GPIO_LINE_F(3) -#define EP93XX_GPIO_LINE_MCBVD2 EP93XX_GPIO_LINE_F(4) -#define EP93XX_GPIO_LINE_VS1 EP93XX_GPIO_LINE_F(5) -#define EP93XX_GPIO_LINE_READY EP93XX_GPIO_LINE_F(6) -#define EP93XX_GPIO_LINE_VS2 EP93XX_GPIO_LINE_F(7) - -/* GPIO port G. */ -#define EP93XX_GPIO_LINE_G(x) ((x) + 48) -#define EP93XX_GPIO_LINE_EECLK EP93XX_GPIO_LINE_G(0) -#define EP93XX_GPIO_LINE_EEDAT EP93XX_GPIO_LINE_G(1) -#define EP93XX_GPIO_LINE_SLA0 EP93XX_GPIO_LINE_G(2) -#define EP93XX_GPIO_LINE_SLA1 EP93XX_GPIO_LINE_G(3) -#define EP93XX_GPIO_LINE_DD12 EP93XX_GPIO_LINE_G(4) -#define EP93XX_GPIO_LINE_DD13 EP93XX_GPIO_LINE_G(5) -#define EP93XX_GPIO_LINE_DD14 EP93XX_GPIO_LINE_G(6) -#define EP93XX_GPIO_LINE_DD15 EP93XX_GPIO_LINE_G(7) - -/* GPIO port H. */ -#define EP93XX_GPIO_LINE_H(x) ((x) + 56) -#define EP93XX_GPIO_LINE_DD0 EP93XX_GPIO_LINE_H(0) -#define EP93XX_GPIO_LINE_DD1 EP93XX_GPIO_LINE_H(1) -#define EP93XX_GPIO_LINE_DD2 EP93XX_GPIO_LINE_H(2) -#define EP93XX_GPIO_LINE_DD3 EP93XX_GPIO_LINE_H(3) -#define EP93XX_GPIO_LINE_DD4 EP93XX_GPIO_LINE_H(4) -#define EP93XX_GPIO_LINE_DD5 EP93XX_GPIO_LINE_H(5) -#define EP93XX_GPIO_LINE_DD6 EP93XX_GPIO_LINE_H(6) -#define EP93XX_GPIO_LINE_DD7 EP93XX_GPIO_LINE_H(7) - -/* maximum value for gpio line identifiers */ -#define EP93XX_GPIO_LINE_MAX EP93XX_GPIO_LINE_H(7) - -/* maximum value for irq capable line identifiers */ -#define EP93XX_GPIO_LINE_MAX_IRQ EP93XX_GPIO_LINE_F(7) - -/* new generic GPIO API - see Documentation/gpio.txt */ - -#include <asm-generic/gpio.h> - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep - -/* - * Map GPIO A0..A7 (0..7) to irq 64..71, - * B0..B7 (7..15) to irq 72..79, and - * F0..F7 (16..24) to irq 80..87. - */ -#define gpio_to_irq(gpio) \ - (((gpio) <= EP93XX_GPIO_LINE_MAX_IRQ) ? (64 + (gpio)) : -EINVAL) - -#define irq_to_gpio(irq) ((irq) - gpio_to_irq(0)) - -#endif +/* empty */ diff --git a/arch/arm/mach-ep93xx/include/mach/hardware.h b/arch/arm/mach-ep93xx/include/mach/hardware.h index 5a3ce02..4df8428 100644 --- a/arch/arm/mach-ep93xx/include/mach/hardware.h +++ b/arch/arm/mach-ep93xx/include/mach/hardware.h @@ -8,8 +8,6 @@ #include <mach/ep93xx-regs.h> #include <mach/platform.h> -#define pcibios_assign_all_busses() 0 - /* * The EP93xx has two external crystal oscillators. To generate the * required high-frequency clocks, the processor uses two phase-locked- diff --git a/arch/arm/mach-ep93xx/include/mach/ts72xx.h b/arch/arm/mach-ep93xx/include/mach/ts72xx.h index 0eabec6..f1397a1 100644 --- a/arch/arm/mach-ep93xx/include/mach/ts72xx.h +++ b/arch/arm/mach-ep93xx/include/mach/ts72xx.h @@ -6,7 +6,7 @@ * TS72xx memory map: * * virt phys size - * febff000 22000000 4K model number register + * febff000 22000000 4K model number register (bits 0-2) * febfe000 22400000 4K options register * febfd000 22800000 4K options register #2 * febf9000 10800000 4K TS-5620 RTC index register @@ -20,6 +20,9 @@ #define TS72XX_MODEL_TS7200 0x00 #define TS72XX_MODEL_TS7250 0x01 #define TS72XX_MODEL_TS7260 0x02 +#define TS72XX_MODEL_TS7300 0x03 +#define TS72XX_MODEL_TS7400 0x04 +#define TS72XX_MODEL_MASK 0x07 #define TS72XX_OPTIONS_PHYS_BASE 0x22400000 @@ -51,19 +54,34 @@ #ifndef __ASSEMBLY__ +static inline int ts72xx_model(void) +{ + return __raw_readb(TS72XX_MODEL_VIRT_BASE) & TS72XX_MODEL_MASK; +} + static inline int board_is_ts7200(void) { - return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7200; + return ts72xx_model() == TS72XX_MODEL_TS7200; } static inline int board_is_ts7250(void) { - return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7250; + return ts72xx_model() == TS72XX_MODEL_TS7250; } static inline int board_is_ts7260(void) { - return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7260; + return ts72xx_model() == TS72XX_MODEL_TS7260; +} + +static inline int board_is_ts7300(void) +{ + return ts72xx_model() == TS72XX_MODEL_TS7300; +} + +static inline int board_is_ts7400(void) +{ + return ts72xx_model() == TS72XX_MODEL_TS7400; } static inline int is_max197_installed(void) diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c index 7adea62..e72f736 100644 --- a/arch/arm/mach-ep93xx/micro9.c +++ b/arch/arm/mach-ep93xx/micro9.c @@ -77,7 +77,7 @@ static void __init micro9_init_machine(void) #ifdef CONFIG_MACH_MICRO9H MACHINE_START(MICRO9, "Contec Micro9-High") /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */ - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, @@ -88,7 +88,7 @@ MACHINE_END #ifdef CONFIG_MACH_MICRO9M MACHINE_START(MICRO9M, "Contec Micro9-Mid") /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */ - .boot_params = EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, @@ -99,7 +99,7 @@ MACHINE_END #ifdef CONFIG_MACH_MICRO9L MACHINE_START(MICRO9L, "Contec Micro9-Lite") /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */ - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, @@ -110,7 +110,7 @@ MACHINE_END #ifdef CONFIG_MACH_MICRO9S MACHINE_START(MICRO9S, "Contec Micro9-Slim") /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */ - .boot_params = EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100, + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c index d96dc1c..52e090d 100644 --- a/arch/arm/mach-ep93xx/simone.c +++ b/arch/arm/mach-ep93xx/simone.c @@ -2,7 +2,7 @@ * arch/arm/mach-ep93xx/simone.c * Simplemachines Sim.One support. * - * Copyright (C) 2010 Ryan Mallon <ryan@bluewatersys.com> + * Copyright (C) 2010 Ryan Mallon * * Based on the 2.6.24.7 support: * Copyright (C) 2009 Simplemachines @@ -18,12 +18,12 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/gpio.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> #include <mach/hardware.h> #include <mach/fb.h> +#include <mach/gpio-ep93xx.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -53,6 +53,17 @@ static struct i2c_board_info __initdata simone_i2c_board_info[] = { }, }; +static struct platform_device simone_audio_device = { + .name = "simone-audio", + .id = -1, +}; + +static void __init simone_register_audio(void) +{ + ep93xx_register_ac97(); + platform_device_register(&simone_audio_device); +} + static void __init simone_init_machine(void) { ep93xx_init_devices(); @@ -61,12 +72,12 @@ static void __init simone_init_machine(void) ep93xx_register_fb(&simone_fb_info); ep93xx_register_i2c(&simone_i2c_gpio_data, simone_i2c_board_info, ARRAY_SIZE(simone_i2c_board_info)); - ep93xx_register_ac97(); + simone_register_audio(); } MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board") -/* Maintainer: Ryan Mallon <ryan@bluewatersys.com> */ - .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, + /* Maintainer: Ryan Mallon */ + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c index ac601fe..8121e3a 100644 --- a/arch/arm/mach-ep93xx/snappercl15.c +++ b/arch/arm/mach-ep93xx/snappercl15.c @@ -3,7 +3,7 @@ * Bluewater Systems Snapper CL15 system module * * Copyright (C) 2009 Bluewater Systems Ltd - * Author: Ryan Mallon <ryan@bluewatersys.com> + * Author: Ryan Mallon * * NAND code adapted from driver by: * Andre Renaud <andre@bluewatersys.com> @@ -20,7 +20,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> -#include <linux/gpio.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> #include <linux/fb.h> @@ -30,6 +29,7 @@ #include <mach/hardware.h> #include <mach/fb.h> +#include <mach/gpio-ep93xx.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -150,6 +150,17 @@ static struct ep93xxfb_mach_info __initdata snappercl15_fb_info = { .bpp = 16, }; +static struct platform_device snappercl15_audio_device = { + .name = "snappercl15-audio", + .id = -1, +}; + +static void __init snappercl15_register_audio(void) +{ + ep93xx_register_i2s(); + platform_device_register(&snappercl15_audio_device); +} + static void __init snappercl15_init_machine(void) { ep93xx_init_devices(); @@ -157,13 +168,13 @@ static void __init snappercl15_init_machine(void) ep93xx_register_i2c(&snappercl15_i2c_gpio_data, snappercl15_i2c_data, ARRAY_SIZE(snappercl15_i2c_data)); ep93xx_register_fb(&snappercl15_fb_info); - ep93xx_register_i2s(); + snappercl15_register_audio(); platform_device_register(&snappercl15_nand_device); } MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15") - /* Maintainer: Ryan Mallon <ryan@bluewatersys.com> */ - .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, + /* Maintainer: Ryan Mallon */ + .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c index c2d2cf4..8b2f143 100644 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -116,8 +116,9 @@ static struct mtd_partition ts72xx_nand_parts[] = { .mask_flags = MTD_WRITEABLE, /* force read-only */ }, { .name = "Linux", - .offset = MTDPART_OFS_APPEND, - .size = 0, /* filled in later */ + .offset = MTDPART_OFS_RETAIN, + .size = TS72XX_REDBOOT_PART_SIZE, + /* leave so much for last partition */ }, { .name = "RedBoot", .offset = MTDPART_OFS_APPEND, @@ -126,28 +127,14 @@ static struct mtd_partition ts72xx_nand_parts[] = { }, }; -static void ts72xx_nand_set_parts(uint64_t size, - struct platform_nand_chip *chip) -{ - /* Factory TS-72xx boards only come with 32MiB or 128MiB NAND options */ - if (size == SZ_32M || size == SZ_128M) { - /* Set the "Linux" partition size */ - ts72xx_nand_parts[1].size = size - TS72XX_REDBOOT_PART_SIZE; - - chip->partitions = ts72xx_nand_parts; - chip->nr_partitions = ARRAY_SIZE(ts72xx_nand_parts); - } else { - pr_warning("Unknown nand disk size:%lluMiB\n", size >> 20); - } -} - static struct platform_nand_data ts72xx_nand_data = { .chip = { .nr_chips = 1, .chip_offset = 0, .chip_delay = 15, .part_probe_types = ts72xx_nand_part_probes, - .set_parts = ts72xx_nand_set_parts, + .partitions = ts72xx_nand_parts, + .nr_partitions = ARRAY_SIZE(ts72xx_nand_parts), }, .ctrl = { .cmd_ctrl = ts72xx_nand_hwcontrol, @@ -257,7 +244,7 @@ static void __init ts72xx_init_machine(void) MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .atag_offset = 0x100, .map_io = ts72xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, |