aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-s5p64x0/include/mach/uncompress.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-s5p64x0/include/mach/uncompress.h')
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/uncompress.h212
1 files changed, 212 insertions, 0 deletions
diff --git a/arch/arm/mach-s5p64x0/include/mach/uncompress.h b/arch/arm/mach-s5p64x0/include/mach/uncompress.h
new file mode 100644
index 0000000..c65b229
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/uncompress.h
@@ -0,0 +1,212 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/uncompress.h
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5P64X0 - uncompress code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/map.h>
+
+/*
+ * cannot use commonly <plat/uncompress.h>
+ * because uart base of S5P6440 and S5P6450 is different
+ */
+
+typedef unsigned int upf_t; /* cannot include linux/serial_core.h */
+
+/* uart setup */
+
+static unsigned int fifo_mask;
+static unsigned int fifo_max;
+
+/* forward declerations */
+
+static void arch_detect_cpu(void);
+
+/* defines for UART registers */
+
+#include <plat/regs-serial.h>
+#include <plat/regs-watchdog.h>
+
+/* working in physical space... */
+#undef S3C2410_WDOGREG
+#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x)))
+
+/* how many bytes we allow into the FIFO at a time in FIFO mode */
+#define FIFO_MAX (14)
+
+static unsigned long uart_base;
+
+static __inline__ void get_uart_base(void)
+{
+ unsigned int chipid;
+
+ chipid = *(const volatile unsigned int __force *) 0xE0100118;
+
+ uart_base = S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT;
+
+ if ((chipid & 0xff000) == 0x50000)
+ uart_base += 0xEC800000;
+ else
+ uart_base += 0xEC000000;
+}
+
+static __inline__ void uart_wr(unsigned int reg, unsigned int val)
+{
+ volatile unsigned int *ptr;
+
+ get_uart_base();
+ ptr = (volatile unsigned int *)(reg + uart_base);
+ *ptr = val;
+}
+
+static __inline__ unsigned int uart_rd(unsigned int reg)
+{
+ volatile unsigned int *ptr;
+
+ get_uart_base();
+ ptr = (volatile unsigned int *)(reg + uart_base);
+ return *ptr;
+}
+
+/*
+ * we can deal with the case the UARTs are being run
+ * in FIFO mode, so that we don't hold up our execution
+ * waiting for tx to happen...
+ */
+
+static void putc(int ch)
+{
+ if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) {
+ int level;
+
+ while (1) {
+ level = uart_rd(S3C2410_UFSTAT);
+ level &= fifo_mask;
+
+ if (level < fifo_max)
+ break;
+ }
+
+ } else {
+ /* not using fifos */
+
+ while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE)
+ barrier();
+ }
+
+ /* write byte to transmission register */
+ uart_wr(S3C2410_UTXH, ch);
+}
+
+static inline void flush(void)
+{
+}
+
+#define __raw_writel(d, ad) \
+ do { \
+ *((volatile unsigned int __force *)(ad)) = (d); \
+ } while (0)
+
+/*
+ * CONFIG_S3C_BOOT_WATCHDOG
+ *
+ * Simple boot-time watchdog setup, to reboot the system if there is
+ * any problem with the boot process
+ */
+
+#ifdef CONFIG_S3C_BOOT_WATCHDOG
+
+#define WDOG_COUNT (0xff00)
+
+static inline void arch_decomp_wdog(void)
+{
+ __raw_writel(WDOG_COUNT, S3C2410_WTCNT);
+}
+
+static void arch_decomp_wdog_start(void)
+{
+ __raw_writel(WDOG_COUNT, S3C2410_WTDAT);
+ __raw_writel(WDOG_COUNT, S3C2410_WTCNT);
+ __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON);
+}
+
+#else
+#define arch_decomp_wdog_start()
+#define arch_decomp_wdog()
+#endif
+
+#ifdef CONFIG_S3C_BOOT_ERROR_RESET
+
+static void arch_decomp_error(const char *x)
+{
+ putstr("\n\n");
+ putstr(x);
+ putstr("\n\n -- System resetting\n");
+
+ __raw_writel(0x4000, S3C2410_WTDAT);
+ __raw_writel(0x4000, S3C2410_WTCNT);
+ __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON);
+
+ while(1);
+}
+
+#define arch_error arch_decomp_error
+#endif
+
+#ifdef CONFIG_S3C_BOOT_UART_FORCE_FIFO
+static inline void arch_enable_uart_fifo(void)
+{
+ u32 fifocon = uart_rd(S3C2410_UFCON);
+
+ if (!(fifocon & S3C2410_UFCON_FIFOMODE)) {
+ fifocon |= S3C2410_UFCON_RESETBOTH;
+ uart_wr(S3C2410_UFCON, fifocon);
+
+ /* wait for fifo reset to complete */
+ while (1) {
+ fifocon = uart_rd(S3C2410_UFCON);
+ if (!(fifocon & S3C2410_UFCON_RESETBOTH))
+ break;
+ }
+ }
+}
+#else
+#define arch_enable_uart_fifo() do { } while(0)
+#endif
+
+static void arch_decomp_setup(void)
+{
+ /*
+ * we may need to setup the uart(s) here if we are not running
+ * on an BAST... the BAST will have left the uarts configured
+ * after calling linux.
+ */
+
+ arch_detect_cpu();
+ arch_decomp_wdog_start();
+
+ /*
+ * Enable the UART FIFOs if they where not enabled and our
+ * configuration says we should turn them on.
+ */
+
+ arch_enable_uart_fifo();
+}
+
+
+
+static void arch_detect_cpu(void)
+{
+ /* we do not need to do any cpu detection here at the moment. */
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */