diff options
Diffstat (limited to 'arch/blackfin/mach-bf548/boards')
| -rw-r--r-- | arch/blackfin/mach-bf548/boards/cm_bf548.c | 22 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf548/boards/ezkit.c | 58 |
2 files changed, 65 insertions, 15 deletions
diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c index ce934ee..24192aa 100644 --- a/arch/blackfin/mach-bf548/boards/cm_bf548.c +++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c @@ -36,11 +36,8 @@ #include <linux/spi/flash.h> #include <linux/irq.h> #include <linux/interrupt.h> -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) #include <linux/usb/musb.h> -#endif #include <asm/bfin5xx_spi.h> -#include <asm/cplb.h> #include <asm/dma.h> #include <asm/gpio.h> #include <asm/nand.h> @@ -175,6 +172,7 @@ static struct resource bfin_uart_resources[] = { { .start = 0xFFC03100, .end = 0xFFC031FF, + .flags = IORESOURCE_MEM, }, #endif }; @@ -268,6 +266,16 @@ static struct resource musb_resources[] = { }, }; +static struct musb_hdrc_config musb_config = { + .multipoint = 0, + .dyn_fifo = 0, + .soft_con = 1, + .dma = 1, + .num_eps = 7, + .dma_channels = 7, + .gpio_vrsel = GPIO_PH6, +}; + static struct musb_hdrc_platform_data musb_plat = { #if defined(CONFIG_USB_MUSB_OTG) .mode = MUSB_OTG, @@ -276,7 +284,7 @@ static struct musb_hdrc_platform_data musb_plat = { #elif defined(CONFIG_USB_GADGET_MUSB_HDRC) .mode = MUSB_PERIPHERAL, #endif - .multipoint = 0, + .config = &musb_config, }; static u64 musb_dmamask = ~(u32)0; @@ -321,12 +329,12 @@ static struct mtd_partition partition_info[] = { { .name = "linux kernel(nand)", .offset = 0, - .size = 4 * SIZE_1M, + .size = 4 * 1024 * 1024, }, { .name = "file system(nand)", - .offset = 4 * SIZE_1M, - .size = (256 - 4) * SIZE_1M, + .offset = 4 * 1024 * 1024, + .size = (256 - 4) * 1024 * 1024, }, }; diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index 3935769..5288187 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -38,11 +38,8 @@ #include <linux/irq.h> #include <linux/i2c.h> #include <linux/interrupt.h> -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) #include <linux/usb/musb.h> -#endif #include <asm/bfin5xx_spi.h> -#include <asm/cplb.h> #include <asm/dma.h> #include <asm/gpio.h> #include <asm/nand.h> @@ -186,6 +183,37 @@ static struct platform_device bf54x_kpad_device = { }; #endif +#if defined(CONFIG_JOYSTICK_BFIN_ROTARY) || defined(CONFIG_JOYSTICK_BFIN_ROTARY_MODULE) +#include <asm/bfin_rotary.h> + +static struct bfin_rotary_platform_data bfin_rotary_data = { + /*.rotary_up_key = KEY_UP,*/ + /*.rotary_down_key = KEY_DOWN,*/ + .rotary_rel_code = REL_WHEEL, + .rotary_button_key = KEY_ENTER, + .debounce = 10, /* 0..17 */ + .mode = ROT_QUAD_ENC | ROT_DEBE, +}; + +static struct resource bfin_rotary_resources[] = { + { + .start = IRQ_CNT, + .end = IRQ_CNT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_rotary_device = { + .name = "bfin-rotary", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_rotary_resources), + .resource = bfin_rotary_resources, + .dev = { + .platform_data = &bfin_rotary_data, + }, +}; +#endif + #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) static struct platform_device rtc_device = { .name = "rtc-bfin", @@ -314,6 +342,16 @@ static struct resource musb_resources[] = { }, }; +static struct musb_hdrc_config musb_config = { + .multipoint = 0, + .dyn_fifo = 0, + .soft_con = 1, + .dma = 1, + .num_eps = 7, + .dma_channels = 7, + .gpio_vrsel = GPIO_PE7, +}; + static struct musb_hdrc_platform_data musb_plat = { #if defined(CONFIG_USB_MUSB_OTG) .mode = MUSB_OTG, @@ -322,7 +360,7 @@ static struct musb_hdrc_platform_data musb_plat = { #elif defined(CONFIG_USB_GADGET_MUSB_HDRC) .mode = MUSB_PERIPHERAL, #endif - .multipoint = 0, + .config = &musb_config, }; static u64 musb_dmamask = ~(u32)0; @@ -367,7 +405,7 @@ static struct mtd_partition partition_info[] = { { .name = "linux kernel(nand)", .offset = 0, - .size = 4 * SIZE_1M, + .size = 4 * 1024 * 1024, }, { .name = "file system(nand)", @@ -424,7 +462,7 @@ static struct mtd_partition ezkit_partitions[] = { .offset = 0, }, { .name = "linux kernel(nor)", - .size = 0x1C0000, + .size = 0x400000, .offset = MTDPART_OFS_APPEND, }, { .name = "file system(nor)", @@ -441,7 +479,7 @@ static struct physmap_flash_data ezkit_flash_data = { static struct resource ezkit_flash_resource = { .start = 0x20000000, - .end = 0x20ffffff, + .end = 0x21ffffff, .flags = IORESOURCE_MEM, }; @@ -551,7 +589,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad7877", .platform_data = &bfin_ad7877_ts_info, - .irq = IRQ_PJ11, + .irq = IRQ_PJ11, /* newer boards (Rev 1.4+) use IRQ_PB4 */ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 2, @@ -810,6 +848,10 @@ static struct platform_device *ezkit_devices[] __initdata = { &bf54x_kpad_device, #endif +#if defined(CONFIG_JOYSTICK_BFIN_ROTARY) || defined(CONFIG_JOYSTICK_BFIN_ROTARY_MODULE) + &bfin_rotary_device, +#endif + #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) &i2c_bfin_twi0_device, #if !defined(CONFIG_BF542) |