diff options
Diffstat (limited to 'arch/powerpc')
| -rw-r--r-- | arch/powerpc/kernel/head_fsl_booke.S | 70 | ||||
| -rw-r--r-- | arch/powerpc/platforms/85xx/Makefile | 2 | ||||
| -rw-r--r-- | arch/powerpc/platforms/85xx/smp.c | 104 |
3 files changed, 176 insertions, 0 deletions
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index 2b57605..9a4639c 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -92,6 +92,7 @@ _ENTRY(_start); * if needed */ +_ENTRY(__early_start) /* 1. Find the index of the entry we're executing in */ bl invstr /* Find our address */ invstr: mflr r6 /* Make it accessible */ @@ -348,6 +349,15 @@ skpinv: addi r6,r6,1 /* Increment */ mtspr SPRN_DBSR,r2 #endif +#ifdef CONFIG_SMP + /* Check to see if we're the second processor, and jump + * to the secondary_start code if so + */ + mfspr r24,SPRN_PIR + cmpwi r24,0 + bne __secondary_start +#endif + /* * This is where the main kernel code starts. */ @@ -740,6 +750,9 @@ finish_tlb_load: #else rlwimi r12, r11, 26, 27, 31 /* extract WIMGE from pte */ #endif +#ifdef CONFIG_SMP + ori r12, r12, MAS2_M +#endif mtspr SPRN_MAS2, r12 li r10, (_PAGE_HWEXEC | _PAGE_PRESENT) @@ -1042,6 +1055,63 @@ _GLOBAL(flush_dcache_L1) blr +#ifdef CONFIG_SMP +/* When we get here, r24 needs to hold the CPU # */ + .globl __secondary_start +__secondary_start: + lis r3,__secondary_hold_acknowledge@h + ori r3,r3,__secondary_hold_acknowledge@l + stw r24,0(r3) + + li r3,0 + mr r4,r24 /* Why? */ + bl call_setup_cpu + + lis r3,tlbcam_index@ha + lwz r3,tlbcam_index@l(r3) + mtctr r3 + li r26,0 /* r26 safe? */ + + /* Load each CAM entry */ +1: mr r3,r26 + bl loadcam_entry + addi r26,r26,1 + bdnz 1b + + /* get current_thread_info and current */ + lis r1,secondary_ti@ha + lwz r1,secondary_ti@l(r1) + lwz r2,TI_TASK(r1) + + /* stack */ + addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD + li r0,0 + stw r0,0(r1) + + /* ptr to current thread */ + addi r4,r2,THREAD /* address of our thread_struct */ + mtspr SPRN_SPRG3,r4 + + /* Setup the defaults for TLB entries */ + li r4,(MAS4_TSIZED(BOOKE_PAGESZ_4K))@l + mtspr SPRN_MAS4,r4 + + /* Jump to start_secondary */ + lis r4,MSR_KERNEL@h + ori r4,r4,MSR_KERNEL@l + lis r3,start_secondary@h + ori r3,r3,start_secondary@l + mtspr SPRN_SRR0,r3 + mtspr SPRN_SRR1,r4 + sync + rfi + sync + + .globl __secondary_hold_acknowledge +__secondary_hold_acknowledge: + .long -1 +#endif + /* * We put a few things here that have to be page-aligned. This stuff * goes at the beginning of the data segment, which is page-aligned. diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index cb3054e..f0798c0 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -1,6 +1,8 @@ # # Makefile for the PowerPC 85xx linux kernel. # +obj-$(CONFIG_SMP) += smp.o + obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c new file mode 100644 index 0000000..d652c71 --- /dev/null +++ b/arch/powerpc/platforms/85xx/smp.c @@ -0,0 +1,104 @@ +/* + * Author: Andy Fleming <afleming@freescale.com> + * Kumar Gala <galak@kernel.crashing.org> + * + * Copyright 2006-2008 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/of.h> + +#include <asm/machdep.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/mpic.h> +#include <asm/cacheflush.h> + +#include <sysdev/fsl_soc.h> + +extern volatile unsigned long __secondary_hold_acknowledge; +extern void __early_start(void); + +#define BOOT_ENTRY_ADDR_UPPER 0 +#define BOOT_ENTRY_ADDR_LOWER 1 +#define BOOT_ENTRY_R3_UPPER 2 +#define BOOT_ENTRY_R3_LOWER 3 +#define BOOT_ENTRY_RESV 4 +#define BOOT_ENTRY_PIR 5 +#define BOOT_ENTRY_R6_UPPER 6 +#define BOOT_ENTRY_R6_LOWER 7 +#define NUM_BOOT_ENTRY 8 +#define SIZE_BOOT_ENTRY (NUM_BOOT_ENTRY * sizeof(u32)) + +static void __init +smp_85xx_kick_cpu(int nr) +{ + unsigned long flags; + const u64 *cpu_rel_addr; + __iomem u32 *bptr_vaddr; + struct device_node *np; + int n = 0; + + WARN_ON (nr < 0 || nr >= NR_CPUS); + + pr_debug("smp_85xx_kick_cpu: kick CPU #%d\n", nr); + + local_irq_save(flags); + + np = of_get_cpu_node(nr, NULL); + cpu_rel_addr = of_get_property(np, "cpu-release-addr", NULL); + + if (cpu_rel_addr == NULL) { + printk(KERN_ERR "No cpu-release-addr for cpu %d\n", nr); + return; + } + + /* Map the spin table */ + bptr_vaddr = ioremap(*cpu_rel_addr, SIZE_BOOT_ENTRY); + + out_be32(bptr_vaddr + BOOT_ENTRY_PIR, nr); + out_be32(bptr_vaddr + BOOT_ENTRY_ADDR_LOWER, __pa(__early_start)); + + /* Wait a bit for the CPU to ack. */ + while ((__secondary_hold_acknowledge != nr) && (++n < 1000)) + mdelay(1); + + iounmap(bptr_vaddr); + + local_irq_restore(flags); + + pr_debug("waited %d msecs for CPU #%d.\n", n, nr); +} + +static void __init +smp_85xx_setup_cpu(int cpu_nr) +{ + mpic_setup_this_cpu(); + + /* Clear any pending timer interrupts */ + mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS); + + /* Enable decrementer interrupt */ + mtspr(SPRN_TCR, TCR_DIE); +} + +struct smp_ops_t smp_85xx_ops = { + .message_pass = smp_mpic_message_pass, + .probe = smp_mpic_probe, + .kick_cpu = smp_85xx_kick_cpu, + .setup_cpu = smp_85xx_setup_cpu, +}; + +void __init +mpc85xx_smp_init(void) +{ + smp_ops = &smp_85xx_ops; +} |