diff options
Diffstat (limited to 'drivers/gpio/cs5535-gpio.c')
| -rw-r--r-- | drivers/gpio/cs5535-gpio.c | 19 |
1 files changed, 15 insertions, 4 deletions
diff --git a/drivers/gpio/cs5535-gpio.c b/drivers/gpio/cs5535-gpio.c index 599f6c9..d3e55a0 100644 --- a/drivers/gpio/cs5535-gpio.c +++ b/drivers/gpio/cs5535-gpio.c @@ -56,15 +56,26 @@ static struct cs5535_gpio_chip { * registers, see include/linux/cs5535.h. */ -static void errata_outl(u32 val, unsigned long addr) +static void errata_outl(struct cs5535_gpio_chip *chip, u32 val, + unsigned int reg) { + unsigned long addr = chip->base + 0x80 + reg; + /* * According to the CS5536 errata (#36), after suspend * a write to the high bank GPIO register will clear all * non-selected bits; the recommended workaround is a * read-modify-write operation. + * + * Don't apply this errata to the edge status GPIOs, as writing + * to their lower bits will clear them. */ - val |= inl(addr); + if (reg != GPIO_POSITIVE_EDGE_STS && reg != GPIO_NEGATIVE_EDGE_STS) { + if (val & 0xffff) + val |= (inl(addr) & 0xffff); /* ignore the high bits */ + else + val |= (inl(addr) ^ (val >> 16)); + } outl(val, addr); } @@ -76,7 +87,7 @@ static void __cs5535_gpio_set(struct cs5535_gpio_chip *chip, unsigned offset, outl(1 << offset, chip->base + reg); else /* high bank register */ - errata_outl(1 << (offset - 16), chip->base + 0x80 + reg); + errata_outl(chip, 1 << (offset - 16), reg); } void cs5535_gpio_set(unsigned offset, unsigned int reg) @@ -98,7 +109,7 @@ static void __cs5535_gpio_clear(struct cs5535_gpio_chip *chip, unsigned offset, outl(1 << (offset + 16), chip->base + reg); else /* high bank register */ - errata_outl(1 << offset, chip->base + 0x80 + reg); + errata_outl(chip, 1 << offset, reg); } void cs5535_gpio_clear(unsigned offset, unsigned int reg) |