diff options
Diffstat (limited to 'drivers/gpu/mali400/r3p2/mali/common/mali_dlbu.c')
-rw-r--r-- | drivers/gpu/mali400/r3p2/mali/common/mali_dlbu.c | 217 |
1 files changed, 217 insertions, 0 deletions
diff --git a/drivers/gpu/mali400/r3p2/mali/common/mali_dlbu.c b/drivers/gpu/mali400/r3p2/mali/common/mali_dlbu.c new file mode 100644 index 0000000..0181663 --- /dev/null +++ b/drivers/gpu/mali400/r3p2/mali/common/mali_dlbu.c @@ -0,0 +1,217 @@ +/* + * Copyright (C) 2012 ARM Limited. All rights reserved. + * + * This program is free software and is provided to you under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation, and any use by you of this program is subject to the terms of such GNU licence. + * + * A copy of the licence is included with the program, and can also be obtained from Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include "mali_dlbu.h" +#include "mali_memory.h" +#include "mali_pp.h" +#include "mali_group.h" +#include "mali_osk.h" +#include "mali_hw_core.h" + +/** + * Size of DLBU registers in bytes + */ +#define MALI_DLBU_SIZE 0x400 + +u32 mali_dlbu_phys_addr = 0; +static mali_io_address mali_dlbu_cpu_addr = 0; + +/** + * DLBU register numbers + * Used in the register read/write routines. + * See the hardware documentation for more information about each register + */ +typedef enum mali_dlbu_register { + MALI_DLBU_REGISTER_MASTER_TLLIST_PHYS_ADDR = 0x0000, /**< Master tile list physical base address; + 31:12 Physical address to the page used for the DLBU + 0 DLBU enable - set this bit to 1 enables the AXI bus + between PPs and L2s, setting to 0 disables the router and + no further transactions are sent to DLBU */ + MALI_DLBU_REGISTER_MASTER_TLLIST_VADDR = 0x0004, /**< Master tile list virtual base address; + 31:12 Virtual address to the page used for the DLBU */ + MALI_DLBU_REGISTER_TLLIST_VBASEADDR = 0x0008, /**< Tile list virtual base address; + 31:12 Virtual address to the tile list. This address is used when + calculating the call address sent to PP.*/ + MALI_DLBU_REGISTER_FB_DIM = 0x000C, /**< Framebuffer dimension; + 23:16 Number of tiles in Y direction-1 + 7:0 Number of tiles in X direction-1 */ + MALI_DLBU_REGISTER_TLLIST_CONF = 0x0010, /**< Tile list configuration; + 29:28 select the size of each allocated block: 0=128 bytes, 1=256, 2=512, 3=1024 + 21:16 2^n number of tiles to be binned to one tile list in Y direction + 5:0 2^n number of tiles to be binned to one tile list in X direction */ + MALI_DLBU_REGISTER_START_TILE_POS = 0x0014, /**< Start tile positions; + 31:24 start position in Y direction for group 1 + 23:16 start position in X direction for group 1 + 15:8 start position in Y direction for group 0 + 7:0 start position in X direction for group 0 */ + MALI_DLBU_REGISTER_PP_ENABLE_MASK = 0x0018, /**< PP enable mask; + 7 enable PP7 for load balancing + 6 enable PP6 for load balancing + 5 enable PP5 for load balancing + 4 enable PP4 for load balancing + 3 enable PP3 for load balancing + 2 enable PP2 for load balancing + 1 enable PP1 for load balancing + 0 enable PP0 for load balancing */ +} mali_dlbu_register; + +typedef enum +{ + PP0ENABLE = 0, + PP1ENABLE, + PP2ENABLE, + PP3ENABLE, + PP4ENABLE, + PP5ENABLE, + PP6ENABLE, + PP7ENABLE +} mali_dlbu_pp_enable; + +struct mali_dlbu_core +{ + struct mali_hw_core hw_core; /**< Common for all HW cores */ + u32 pp_cores_mask; /**< This is a mask for the PP cores whose operation will be controlled by LBU + see MALI_DLBU_REGISTER_PP_ENABLE_MASK register */ +}; + +_mali_osk_errcode_t mali_dlbu_initialize(void) +{ + + MALI_DEBUG_PRINT(2, ("Mali DLBU: Initializing\n")); + + if (_MALI_OSK_ERR_OK == mali_mmu_get_table_page(&mali_dlbu_phys_addr, &mali_dlbu_cpu_addr)) + { + MALI_SUCCESS; + } + + return _MALI_OSK_ERR_FAULT; +} + +void mali_dlbu_terminate(void) +{ + MALI_DEBUG_PRINT(3, ("Mali DLBU: terminating\n")); + + mali_mmu_release_table_page(mali_dlbu_phys_addr); +} + +struct mali_dlbu_core *mali_dlbu_create(const _mali_osk_resource_t * resource) +{ + struct mali_dlbu_core *core = NULL; + + MALI_DEBUG_PRINT(2, ("Mali DLBU: Creating Mali dynamic load balancing unit: %s\n", resource->description)); + + core = _mali_osk_malloc(sizeof(struct mali_dlbu_core)); + if (NULL != core) + { + if (_MALI_OSK_ERR_OK == mali_hw_core_create(&core->hw_core, resource, MALI_DLBU_SIZE)) + { + core->pp_cores_mask = 0; + if (_MALI_OSK_ERR_OK == mali_dlbu_reset(core)) + { + return core; + } + MALI_PRINT_ERROR(("Failed to reset DLBU %s\n", core->hw_core.description)); + mali_hw_core_delete(&core->hw_core); + } + + _mali_osk_free(core); + } + else + { + MALI_PRINT_ERROR(("Mali DLBU: Failed to allocate memory for DLBU core\n")); + } + + return NULL; +} + +void mali_dlbu_delete(struct mali_dlbu_core *dlbu) +{ + MALI_DEBUG_ASSERT_POINTER(dlbu); + + mali_dlbu_reset(dlbu); + mali_hw_core_delete(&dlbu->hw_core); + _mali_osk_free(dlbu); +} + +_mali_osk_errcode_t mali_dlbu_reset(struct mali_dlbu_core *dlbu) +{ + u32 dlbu_registers[7]; + _mali_osk_errcode_t err = _MALI_OSK_ERR_FAULT; + MALI_DEBUG_ASSERT_POINTER(dlbu); + + MALI_DEBUG_PRINT(4, ("Mali DLBU: mali_dlbu_reset: %s\n", dlbu->hw_core.description)); + + dlbu_registers[0] = mali_dlbu_phys_addr | 1; /* bit 0 enables the whole core */ + dlbu_registers[1] = MALI_DLBU_VIRT_ADDR; + dlbu_registers[2] = 0; + dlbu_registers[3] = 0; + dlbu_registers[4] = 0; + dlbu_registers[5] = 0; + dlbu_registers[6] = dlbu->pp_cores_mask; + + /* write reset values to core registers */ + mali_hw_core_register_write_array_relaxed(&dlbu->hw_core, MALI_DLBU_REGISTER_MASTER_TLLIST_PHYS_ADDR, dlbu_registers, 7); + + err = _MALI_OSK_ERR_OK; + + return err; +} + +void mali_dlbu_update_mask(struct mali_dlbu_core *dlbu) +{ + MALI_DEBUG_ASSERT_POINTER(dlbu); + + mali_hw_core_register_write(&dlbu->hw_core, MALI_DLBU_REGISTER_PP_ENABLE_MASK, dlbu->pp_cores_mask); +} + +void mali_dlbu_add_group(struct mali_dlbu_core *dlbu, struct mali_group *group) +{ + struct mali_pp_core *pp_core; + u32 bcast_id; + + MALI_DEBUG_ASSERT_POINTER( dlbu ); + MALI_DEBUG_ASSERT_POINTER( group ); + + pp_core = mali_group_get_pp_core(group); + bcast_id = mali_pp_core_get_bcast_id(pp_core); + + dlbu->pp_cores_mask |= bcast_id; + MALI_DEBUG_PRINT(3, ("Mali DLBU: Adding core[%d] New mask= 0x%02x\n", bcast_id , dlbu->pp_cores_mask)); +} + +/* Remove a group from the DLBU */ +void mali_dlbu_remove_group(struct mali_dlbu_core *dlbu, struct mali_group *group) +{ + struct mali_pp_core *pp_core; + u32 bcast_id; + + MALI_DEBUG_ASSERT_POINTER( dlbu ); + MALI_DEBUG_ASSERT_POINTER( group ); + + pp_core = mali_group_get_pp_core(group); + bcast_id = mali_pp_core_get_bcast_id(pp_core); + + dlbu->pp_cores_mask &= ~bcast_id; + MALI_DEBUG_PRINT(3, ("Mali DLBU: Removing core[%d] New mask= 0x%02x\n", bcast_id, dlbu->pp_cores_mask)); +} + +/* Configure the DLBU for \a job. This needs to be done before the job is started on the groups in the DLBU. */ +void mali_dlbu_config_job(struct mali_dlbu_core *dlbu, struct mali_pp_job *job) +{ + u32 *registers; + MALI_DEBUG_ASSERT(job); + registers = mali_pp_job_get_dlbu_registers(job); + MALI_DEBUG_PRINT(4, ("Mali DLBU: Starting job\n")); + + /* Writing 4 registers: + * DLBU registers except the first two (written once at DLBU initialisation / reset) and the PP_ENABLE_MASK register */ + mali_hw_core_register_write_array_relaxed(&dlbu->hw_core, MALI_DLBU_REGISTER_TLLIST_VBASEADDR, registers, 4); + +} |