diff options
Diffstat (limited to 'drivers/gpu/mali400/r3p2/mali/regs/mali_gp_regs.h')
| -rw-r--r-- | drivers/gpu/mali400/r3p2/mali/regs/mali_gp_regs.h | 173 |
1 files changed, 173 insertions, 0 deletions
diff --git a/drivers/gpu/mali400/r3p2/mali/regs/mali_gp_regs.h b/drivers/gpu/mali400/r3p2/mali/regs/mali_gp_regs.h new file mode 100644 index 0000000..c204901 --- /dev/null +++ b/drivers/gpu/mali400/r3p2/mali/regs/mali_gp_regs.h @@ -0,0 +1,173 @@ +/* + * Copyright (C) 2010, 2012 ARM Limited. All rights reserved. + * + * This program is free software and is provided to you under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation, and any use by you of this program is subject to the terms of such GNU licence. + * + * A copy of the licence is included with the program, and can also be obtained from Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#ifndef _MALIGP2_CONROL_REGS_H_ +#define _MALIGP2_CONROL_REGS_H_ + +/** + * These are the different geometry processor control registers. + * Their usage is to control and monitor the operation of the + * Vertex Shader and the Polygon List Builder in the geometry processor. + * Addresses are in 32-bit word relative sizes. + * @see [P0081] "Geometry Processor Data Structures" for details + */ + +typedef enum { + MALIGP2_REG_ADDR_MGMT_VSCL_START_ADDR = 0x00, + MALIGP2_REG_ADDR_MGMT_VSCL_END_ADDR = 0x04, + MALIGP2_REG_ADDR_MGMT_PLBUCL_START_ADDR = 0x08, + MALIGP2_REG_ADDR_MGMT_PLBUCL_END_ADDR = 0x0c, + MALIGP2_REG_ADDR_MGMT_PLBU_ALLOC_START_ADDR = 0x10, + MALIGP2_REG_ADDR_MGMT_PLBU_ALLOC_END_ADDR = 0x14, + MALIGP2_REG_ADDR_MGMT_CMD = 0x20, + MALIGP2_REG_ADDR_MGMT_INT_RAWSTAT = 0x24, + MALIGP2_REG_ADDR_MGMT_INT_CLEAR = 0x28, + MALIGP2_REG_ADDR_MGMT_INT_MASK = 0x2C, + MALIGP2_REG_ADDR_MGMT_INT_STAT = 0x30, + MALIGP2_REG_ADDR_MGMT_WRITE_BOUND_LOW = 0x34, + MALIGP2_REG_ADDR_MGMT_PERF_CNT_0_ENABLE = 0x3C, + MALIGP2_REG_ADDR_MGMT_PERF_CNT_1_ENABLE = 0x40, + MALIGP2_REG_ADDR_MGMT_PERF_CNT_0_SRC = 0x44, + MALIGP2_REG_ADDR_MGMT_PERF_CNT_1_SRC = 0x48, + MALIGP2_REG_ADDR_MGMT_PERF_CNT_0_VALUE = 0x4C, + MALIGP2_REG_ADDR_MGMT_PERF_CNT_1_VALUE = 0x50, + MALIGP2_REG_ADDR_MGMT_STATUS = 0x68, + MALIGP2_REG_ADDR_MGMT_VERSION = 0x6C, + MALIGP2_REG_ADDR_MGMT_VSCL_START_ADDR_READ = 0x80, + MALIGP2_REG_ADDR_MGMT_PLBCL_START_ADDR_READ = 0x84, + MALIGP2_CONTR_AXI_BUS_ERROR_STAT = 0x94, + MALIGP2_REGISTER_ADDRESS_SPACE_SIZE = 0x98, +} maligp_reg_addr_mgmt_addr; + +#define MALIGP2_REG_VAL_PERF_CNT_ENABLE 1 + +/** + * Commands to geometry processor. + * @see MALIGP2_CTRL_REG_CMD + */ +typedef enum +{ + MALIGP2_REG_VAL_CMD_START_VS = (1<< 0), + MALIGP2_REG_VAL_CMD_START_PLBU = (1<< 1), + MALIGP2_REG_VAL_CMD_UPDATE_PLBU_ALLOC = (1<< 4), + MALIGP2_REG_VAL_CMD_RESET = (1<< 5), + MALIGP2_REG_VAL_CMD_FORCE_HANG = (1<< 6), + MALIGP2_REG_VAL_CMD_STOP_BUS = (1<< 9), + MALI400GP_REG_VAL_CMD_SOFT_RESET = (1<<10), /* only valid for Mali-300 and later */ +} mgp_contr_reg_val_cmd; + + +/** @defgroup MALIGP2_IRQ + * Interrupt status of geometry processor. + * @see MALIGP2_CTRL_REG_INT_RAWSTAT, MALIGP2_REG_ADDR_MGMT_INT_CLEAR, + * MALIGP2_REG_ADDR_MGMT_INT_MASK, MALIGP2_REG_ADDR_MGMT_INT_STAT + * @{ + */ +#define MALIGP2_REG_VAL_IRQ_VS_END_CMD_LST (1 << 0) +#define MALIGP2_REG_VAL_IRQ_PLBU_END_CMD_LST (1 << 1) +#define MALIGP2_REG_VAL_IRQ_PLBU_OUT_OF_MEM (1 << 2) +#define MALIGP2_REG_VAL_IRQ_VS_SEM_IRQ (1 << 3) +#define MALIGP2_REG_VAL_IRQ_PLBU_SEM_IRQ (1 << 4) +#define MALIGP2_REG_VAL_IRQ_HANG (1 << 5) +#define MALIGP2_REG_VAL_IRQ_FORCE_HANG (1 << 6) +#define MALIGP2_REG_VAL_IRQ_PERF_CNT_0_LIMIT (1 << 7) +#define MALIGP2_REG_VAL_IRQ_PERF_CNT_1_LIMIT (1 << 8) +#define MALIGP2_REG_VAL_IRQ_WRITE_BOUND_ERR (1 << 9) +#define MALIGP2_REG_VAL_IRQ_SYNC_ERROR (1 << 10) +#define MALIGP2_REG_VAL_IRQ_AXI_BUS_ERROR (1 << 11) +#define MALI400GP_REG_VAL_IRQ_AXI_BUS_STOPPED (1 << 12) +#define MALI400GP_REG_VAL_IRQ_VS_INVALID_CMD (1 << 13) +#define MALI400GP_REG_VAL_IRQ_PLB_INVALID_CMD (1 << 14) +#define MALI400GP_REG_VAL_IRQ_RESET_COMPLETED (1 << 19) +#define MALI400GP_REG_VAL_IRQ_SEMAPHORE_UNDERFLOW (1 << 20) +#define MALI400GP_REG_VAL_IRQ_SEMAPHORE_OVERFLOW (1 << 21) +#define MALI400GP_REG_VAL_IRQ_PTR_ARRAY_OUT_OF_BOUNDS (1 << 22) + +/* Mask defining all IRQs in Mali GP */ +#define MALIGP2_REG_VAL_IRQ_MASK_ALL \ + (\ + MALIGP2_REG_VAL_IRQ_VS_END_CMD_LST | \ + MALIGP2_REG_VAL_IRQ_PLBU_END_CMD_LST | \ + MALIGP2_REG_VAL_IRQ_PLBU_OUT_OF_MEM | \ + MALIGP2_REG_VAL_IRQ_VS_SEM_IRQ | \ + MALIGP2_REG_VAL_IRQ_PLBU_SEM_IRQ | \ + MALIGP2_REG_VAL_IRQ_HANG | \ + MALIGP2_REG_VAL_IRQ_FORCE_HANG | \ + MALIGP2_REG_VAL_IRQ_PERF_CNT_0_LIMIT | \ + MALIGP2_REG_VAL_IRQ_PERF_CNT_1_LIMIT | \ + MALIGP2_REG_VAL_IRQ_WRITE_BOUND_ERR | \ + MALIGP2_REG_VAL_IRQ_SYNC_ERROR | \ + MALIGP2_REG_VAL_IRQ_AXI_BUS_ERROR | \ + MALI400GP_REG_VAL_IRQ_AXI_BUS_STOPPED | \ + MALI400GP_REG_VAL_IRQ_VS_INVALID_CMD | \ + MALI400GP_REG_VAL_IRQ_PLB_INVALID_CMD | \ + MALI400GP_REG_VAL_IRQ_RESET_COMPLETED | \ + MALI400GP_REG_VAL_IRQ_SEMAPHORE_UNDERFLOW | \ + MALI400GP_REG_VAL_IRQ_SEMAPHORE_OVERFLOW | \ + MALI400GP_REG_VAL_IRQ_PTR_ARRAY_OUT_OF_BOUNDS) + +/* Mask defining the IRQs in Mali GP which we use */ +#define MALIGP2_REG_VAL_IRQ_MASK_USED \ + (\ + MALIGP2_REG_VAL_IRQ_VS_END_CMD_LST | \ + MALIGP2_REG_VAL_IRQ_PLBU_END_CMD_LST | \ + MALIGP2_REG_VAL_IRQ_PLBU_OUT_OF_MEM | \ + MALIGP2_REG_VAL_IRQ_FORCE_HANG | \ + MALIGP2_REG_VAL_IRQ_WRITE_BOUND_ERR | \ + MALIGP2_REG_VAL_IRQ_SYNC_ERROR | \ + MALIGP2_REG_VAL_IRQ_AXI_BUS_ERROR | \ + MALI400GP_REG_VAL_IRQ_VS_INVALID_CMD | \ + MALI400GP_REG_VAL_IRQ_PLB_INVALID_CMD | \ + MALI400GP_REG_VAL_IRQ_SEMAPHORE_UNDERFLOW | \ + MALI400GP_REG_VAL_IRQ_SEMAPHORE_OVERFLOW | \ + MALI400GP_REG_VAL_IRQ_PTR_ARRAY_OUT_OF_BOUNDS) + +/* Mask defining non IRQs on MaliGP2*/ +#define MALIGP2_REG_VAL_IRQ_MASK_NONE 0 + +/** }@ defgroup MALIGP2_IRQ*/ + +/** @defgroup MALIGP2_STATUS + * The different Status values to the geometry processor. + * @see MALIGP2_CTRL_REG_STATUS + * @{ + */ +#define MALIGP2_REG_VAL_STATUS_VS_ACTIVE 0x0002 +#define MALIGP2_REG_VAL_STATUS_BUS_STOPPED 0x0004 +#define MALIGP2_REG_VAL_STATUS_PLBU_ACTIVE 0x0008 +#define MALIGP2_REG_VAL_STATUS_BUS_ERROR 0x0040 +#define MALIGP2_REG_VAL_STATUS_WRITE_BOUND_ERR 0x0100 +/** }@ defgroup MALIGP2_STATUS*/ + +#define MALIGP2_REG_VAL_STATUS_MASK_ACTIVE (\ + MALIGP2_REG_VAL_STATUS_VS_ACTIVE|\ + MALIGP2_REG_VAL_STATUS_PLBU_ACTIVE) + + +#define MALIGP2_REG_VAL_STATUS_MASK_ERROR (\ + MALIGP2_REG_VAL_STATUS_BUS_ERROR |\ + MALIGP2_REG_VAL_STATUS_WRITE_BOUND_ERR ) + +/* This should be in the top 16 bit of the version register of gp.*/ +#define MALI200_GP_PRODUCT_ID 0xA07 +#define MALI300_GP_PRODUCT_ID 0xC07 +#define MALI400_GP_PRODUCT_ID 0xB07 +#define MALI450_GP_PRODUCT_ID 0xD07 + +/** + * The different sources for instrumented on the geometry processor. + * @see MALIGP2_REG_ADDR_MGMT_PERF_CNT_0_SRC + */ + +enum MALIGP2_cont_reg_perf_cnt_src { + MALIGP2_REG_VAL_PERF_CNT1_SRC_NUMBER_OF_VERTICES_PROCESSED = 0x0a, +}; + +#endif |