diff options
Diffstat (limited to 'drivers/ide/pci/cmd64x.c')
| -rw-r--r-- | drivers/ide/pci/cmd64x.c | 90 |
1 files changed, 27 insertions, 63 deletions
diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c index 77f51ab..61ea96b 100644 --- a/drivers/ide/pci/cmd64x.c +++ b/drivers/ide/pci/cmd64x.c @@ -74,7 +74,7 @@ #define UDIDETCR1 0x7B #define DTPR1 0x7C -#if defined(DISPLAY_CMD64X_TIMINGS) && defined(CONFIG_PROC_FS) +#if defined(DISPLAY_CMD64X_TIMINGS) && defined(CONFIG_IDE_PROC_FS) #include <linux/stat.h> #include <linux/proc_fs.h> @@ -165,7 +165,7 @@ static int cmd64x_get_info (char *buffer, char **addr, off_t offset, int count) return p-buffer; /* => must be less than 4k! */ } -#endif /* defined(DISPLAY_CMD64X_TIMINGS) && defined(CONFIG_PROC_FS) */ +#endif /* defined(DISPLAY_CMD64X_TIMINGS) && defined(CONFIG_IDE_PROC_FS) */ static u8 quantize_timing(int timing, int quant) { @@ -292,55 +292,6 @@ static void cmd64x_tune_drive (ide_drive_t *drive, u8 pio) (void) ide_config_drive_speed(drive, XFER_PIO_0 + pio); } -static u8 cmd64x_ratemask (ide_drive_t *drive) -{ - struct pci_dev *dev = HWIF(drive)->pci_dev; - u8 mode = 0; - - switch(dev->device) { - case PCI_DEVICE_ID_CMD_649: - mode = 3; - break; - case PCI_DEVICE_ID_CMD_648: - mode = 2; - break; - case PCI_DEVICE_ID_CMD_643: - return 0; - - case PCI_DEVICE_ID_CMD_646: - { - unsigned int class_rev = 0; - pci_read_config_dword(dev, - PCI_CLASS_REVISION, &class_rev); - class_rev &= 0xff; - /* - * UltraDMA only supported on PCI646U and PCI646U2, which - * correspond to revisions 0x03, 0x05 and 0x07 respectively. - * Actually, although the CMD tech support people won't - * tell me the details, the 0x03 revision cannot support - * UDMA correctly without hardware modifications, and even - * then it only works with Quantum disks due to some - * hold time assumptions in the 646U part which are fixed - * in the 646U2. - * - * So we only do UltraDMA on revision 0x05 and 0x07 chipsets. - */ - switch(class_rev) { - case 0x07: - case 0x05: - return 1; - case 0x03: - case 0x01: - default: - return 0; - } - } - } - if (!eighty_ninty_three(drive)) - mode = min(mode, (u8)1); - return mode; -} - static int cmd64x_tune_chipset (ide_drive_t *drive, u8 speed) { ide_hwif_t *hwif = HWIF(drive); @@ -348,7 +299,7 @@ static int cmd64x_tune_chipset (ide_drive_t *drive, u8 speed) u8 unit = drive->dn & 0x01; u8 regU = 0, pciU = hwif->channel ? UDIDETCR1 : UDIDETCR0; - speed = ide_rate_filter(cmd64x_ratemask(drive), speed); + speed = ide_rate_filter(drive, speed); if (speed >= XFER_SW_DMA_0) { (void) pci_read_config_byte(dev, pciU, ®U); @@ -403,7 +354,7 @@ static int cmd64x_tune_chipset (ide_drive_t *drive, u8 speed) static int config_chipset_for_dma (ide_drive_t *drive) { - u8 speed = ide_dma_speed(drive, cmd64x_ratemask(drive)); + u8 speed = ide_max_dma_mode(drive); if (!speed) return 0; @@ -597,7 +548,7 @@ static unsigned int __devinit init_chipset_cmd64x(struct pci_dev *dev, const cha (void) pci_write_config_byte(dev, UDIDETCR0, 0xf0); #endif /* CONFIG_PPC */ -#if defined(DISPLAY_CMD64X_TIMINGS) && defined(CONFIG_PROC_FS) +#if defined(DISPLAY_CMD64X_TIMINGS) && defined(CONFIG_IDE_PROC_FS) cmd_devs[n_cmd_devs++] = dev; @@ -605,7 +556,7 @@ static unsigned int __devinit init_chipset_cmd64x(struct pci_dev *dev, const cha cmd64x_proc = 1; ide_pci_create_host_proc("cmd64x", cmd64x_get_info); } -#endif /* DISPLAY_CMD64X_TIMINGS && CONFIG_PROC_FS */ +#endif /* DISPLAY_CMD64X_TIMINGS && CONFIG_IDE_PROC_FS */ return 0; } @@ -644,15 +595,24 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif) hwif->atapi_dma = 1; - hwif->ultra_mask = 0x3f; - hwif->mwdma_mask = 0x07; + hwif->ultra_mask = hwif->cds->udma_mask; + + /* + * UltraDMA only supported on PCI646U and PCI646U2, which + * correspond to revisions 0x03, 0x05 and 0x07 respectively. + * Actually, although the CMD tech support people won't + * tell me the details, the 0x03 revision cannot support + * UDMA correctly without hardware modifications, and even + * then it only works with Quantum disks due to some + * hold time assumptions in the 646U part which are fixed + * in the 646U2. + * + * So we only do UltraDMA on revision 0x05 and 0x07 chipsets. + */ + if (dev->device == PCI_DEVICE_ID_CMD_646 && class_rev < 5) + hwif->ultra_mask = 0x00; - if (dev->device == PCI_DEVICE_ID_CMD_643) - hwif->ultra_mask = 0x80; - if (dev->device == PCI_DEVICE_ID_CMD_646) - hwif->ultra_mask = (class_rev > 0x04) ? 0x07 : 0x80; - if (dev->device == PCI_DEVICE_ID_CMD_648) - hwif->ultra_mask = 0x1f; + hwif->mwdma_mask = 0x07; hwif->ide_dma_check = &cmd64x_config_drive_for_dma; if (!(hwif->udma_four)) @@ -716,6 +676,7 @@ static ide_pci_device_t cmd64x_chipsets[] __devinitdata = { .autodma = AUTODMA, .enablebits = {{0x00,0x00,0x00}, {0x51,0x08,0x08}}, .bootable = ON_BOARD, + .udma_mask = 0x00, /* no udma */ },{ /* 1 */ .name = "CMD646", .init_setup = init_setup_cmd646, @@ -725,6 +686,7 @@ static ide_pci_device_t cmd64x_chipsets[] __devinitdata = { .autodma = AUTODMA, .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}}, .bootable = ON_BOARD, + .udma_mask = 0x07, /* udma0-2 */ },{ /* 2 */ .name = "CMD648", .init_setup = init_setup_cmd64x, @@ -734,6 +696,7 @@ static ide_pci_device_t cmd64x_chipsets[] __devinitdata = { .autodma = AUTODMA, .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}}, .bootable = ON_BOARD, + .udma_mask = 0x1f, /* udma0-4 */ },{ /* 3 */ .name = "CMD649", .init_setup = init_setup_cmd64x, @@ -743,6 +706,7 @@ static ide_pci_device_t cmd64x_chipsets[] __devinitdata = { .autodma = AUTODMA, .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}}, .bootable = ON_BOARD, + .udma_mask = 0x3f, /* udma0-5 */ } }; |