diff options
Diffstat (limited to 'drivers/media/video/em28xx/em28xx-cards.c')
| -rw-r--r-- | drivers/media/video/em28xx/em28xx-cards.c | 34 |
1 files changed, 34 insertions, 0 deletions
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 791ab2c..e425111 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -1087,6 +1087,20 @@ struct em28xx_board em28xx_boards[] = { .amux = EM28XX_AMUX_LINE_IN, } }, }, + [EM2874_BOARD_PINNACLE_PCTV_80E] = { + .name = "Pinnacle PCTV HD Mini", + .vchannels = 0, + .tuner_type = TUNER_ABSENT, + .has_dvb = 1, + .decoder = EM28XX_NODECODER, +#ifdef DJH_DEBUG + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = EM28XX_AMUX_LINE_IN, + } }, +#endif + }, }; const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); @@ -1180,6 +1194,8 @@ struct usb_device_id em28xx_id_table [] = { .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO }, { USB_DEVICE(0x2304, 0x0227), .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO }, + { USB_DEVICE(0x2304, 0x023f), + .driver_info = EM2874_BOARD_PINNACLE_PCTV_80E }, { USB_DEVICE(0x0413, 0x6023), .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII }, { USB_DEVICE(0x093b, 0xa005), @@ -1255,6 +1271,17 @@ static struct em28xx_reg_seq em2882_terratec_hybrid_xs_digital[] = { { -1, -1, -1, -1}, }; +/* Pinnacle PCTV HD Mini (80e) GPIOs + 0-5: not used + 6: demod reset, active low + 7: LED on, active high */ +static struct em28xx_reg_seq em2874_pinnacle_80e_digital[] = { + {EM28XX_R06_I2C_CLK, 0x45, 0xff, 10}, /*400 KHz*/ + {EM2874_R80_GPIO, 0x80, 0xff, 100},/*Demod reset*/ + {EM2874_R80_GPIO, 0xc0, 0xff, 10}, + { -1, -1, -1, -1}, +}; + /* * EEPROM hash table for devices with generic USB IDs */ @@ -1518,6 +1545,13 @@ void em28xx_pre_card_setup(struct em28xx *dev) /* enables audio for that device */ em28xx_write_regs_req(dev, 0x00, 0x08, "\xfd", 1); break; + + case EM2874_BOARD_PINNACLE_PCTV_80E: + /* Set 400 KHz clock */ + em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x45", 1); + + dev->digital_gpio = em2874_pinnacle_80e_digital; + break; } em28xx_gpio_set(dev, dev->tun_analog_gpio); |