diff options
Diffstat (limited to 'drivers/media/video/gspca/ov519.c')
-rw-r--r-- | drivers/media/video/gspca/ov519.c | 172 |
1 files changed, 129 insertions, 43 deletions
diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c index 057e287..6a01b35 100644 --- a/drivers/media/video/gspca/ov519.c +++ b/drivers/media/video/gspca/ov519.c @@ -36,6 +36,9 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #define MODULE_NAME "ov519" #include <linux/input.h> @@ -134,6 +137,7 @@ enum sensors { SEN_OV7670, SEN_OV76BE, SEN_OV8610, + SEN_OV9600, }; /* Note this is a bit of a hack, but the w9968cf driver needs the code for all @@ -340,6 +344,10 @@ static const unsigned ctrl_dis[] = { (1 << EXPOSURE) | (1 << AUTOGAIN) | (1 << FREQ), +[SEN_OV9600] = ((1 << NCTRL) - 1) /* no control */ + ^ ((1 << EXPOSURE) /* but exposure */ + | (1 << AUTOGAIN)), /* and autogain */ + }; static const struct v4l2_pix_format ov519_vga_mode[] = { @@ -525,6 +533,17 @@ static const struct v4l2_pix_format ovfx2_ov3610_mode[] = { .colorspace = V4L2_COLORSPACE_SRGB, .priv = 0}, }; +static const struct v4l2_pix_format ovfx2_ov9600_mode[] = { + {640, 480, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, + .bytesperline = 640, + .sizeimage = 640 * 480, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1}, + {1280, 1024, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, + .bytesperline = 1280, + .sizeimage = 1280 * 1024, + .colorspace = V4L2_COLORSPACE_SRGB}, +}; /* Registers common to OV511 / OV518 */ #define R51x_FIFO_PSIZE 0x30 /* 2 bytes wide w/ OV518(+) */ @@ -1807,6 +1826,22 @@ static const struct ov_i2c_regvals norm_7660[] = { | OV7670_COM8_AEC}, {0xa1, 0xc8} }; +static const struct ov_i2c_regvals norm_9600[] = { + {0x12, 0x80}, + {0x0c, 0x28}, + {0x11, 0x80}, + {0x13, 0xb5}, + {0x14, 0x3e}, + {0x1b, 0x04}, + {0x24, 0xb0}, + {0x25, 0x90}, + {0x26, 0x94}, + {0x35, 0x90}, + {0x37, 0x07}, + {0x38, 0x08}, + {0x01, 0x8e}, + {0x02, 0x85} +}; /* 7670. Defaults taken from OmniVision provided data, * as provided by Jonathan Corbet of OLPC */ @@ -2139,7 +2174,7 @@ static void reg_w(struct sd *sd, u16 index, u16 value) sd->gspca_dev.usb_buf, 1, 500); leave: if (ret < 0) { - err("reg_w %02x failed %d", index, ret); + pr_err("reg_w %02x failed %d\n", index, ret); sd->gspca_dev.usb_err = ret; return; } @@ -2178,7 +2213,7 @@ static int reg_r(struct sd *sd, u16 index) PDEBUG(D_USBI, "GET %02x 0000 %04x %02x", req, index, ret); } else { - err("reg_r %02x failed %d", index, ret); + pr_err("reg_r %02x failed %d\n", index, ret); sd->gspca_dev.usb_err = ret; } @@ -2203,7 +2238,7 @@ static int reg_r8(struct sd *sd, if (ret >= 0) { ret = sd->gspca_dev.usb_buf[0]; } else { - err("reg_r8 %02x failed %d", index, ret); + pr_err("reg_r8 %02x failed %d\n", index, ret); sd->gspca_dev.usb_err = ret; } @@ -2256,7 +2291,7 @@ static void ov518_reg_w32(struct sd *sd, u16 index, u32 value, int n) 0, index, sd->gspca_dev.usb_buf, n, 500); if (ret < 0) { - err("reg_w32 %02x failed %d", index, ret); + pr_err("reg_w32 %02x failed %d\n", index, ret); sd->gspca_dev.usb_err = ret; } } @@ -2400,9 +2435,12 @@ static int ov518_i2c_r(struct sd *sd, u8 reg) /* Initiate 2-byte write cycle */ reg_w(sd, R518_I2C_CTL, 0x03); + reg_r8(sd, R518_I2C_CTL); /* Initiate 2-byte read cycle */ reg_w(sd, R518_I2C_CTL, 0x05); + reg_r8(sd, R518_I2C_CTL); + value = reg_r(sd, R51x_I2C_DATA); PDEBUG(D_USBI, "ov518_i2c_r %02x %02x", reg, value); return value; @@ -2422,7 +2460,7 @@ static void ovfx2_i2c_w(struct sd *sd, u8 reg, u8 value) (u16) value, (u16) reg, NULL, 0, 500); if (ret < 0) { - err("ovfx2_i2c_w %02x failed %d", reg, ret); + pr_err("ovfx2_i2c_w %02x failed %d\n", reg, ret); sd->gspca_dev.usb_err = ret; } @@ -2446,7 +2484,7 @@ static int ovfx2_i2c_r(struct sd *sd, u8 reg) ret = sd->gspca_dev.usb_buf[0]; PDEBUG(D_USBI, "ovfx2_i2c_r %02x %02x", reg, ret); } else { - err("ovfx2_i2c_r %02x failed %d", reg, ret); + pr_err("ovfx2_i2c_r %02x failed %d\n", reg, ret); sd->gspca_dev.usb_err = ret; } @@ -2686,13 +2724,13 @@ static void write_i2c_regvals(struct sd *sd, * ***************************************************************************/ -/* This initializes the OV2x10 / OV3610 / OV3620 */ +/* This initializes the OV2x10 / OV3610 / OV3620 / OV9600 */ static void ov_hires_configure(struct sd *sd) { int high, low; if (sd->bridge != BRIDGE_OVFX2) { - err("error hires sensors only supported with ovfx2"); + pr_err("error hires sensors only supported with ovfx2\n"); return; } @@ -2702,19 +2740,32 @@ static void ov_hires_configure(struct sd *sd) high = i2c_r(sd, 0x0a); low = i2c_r(sd, 0x0b); /* info("%x, %x", high, low); */ - if (high == 0x96 && low == 0x40) { - PDEBUG(D_PROBE, "Sensor is an OV2610"); - sd->sensor = SEN_OV2610; - } else if (high == 0x96 && low == 0x41) { - PDEBUG(D_PROBE, "Sensor is an OV2610AE"); - sd->sensor = SEN_OV2610AE; - } else if (high == 0x36 && (low & 0x0f) == 0x00) { - PDEBUG(D_PROBE, "Sensor is an OV3610"); - sd->sensor = SEN_OV3610; - } else { - err("Error unknown sensor type: %02x%02x", - high, low); + switch (high) { + case 0x96: + switch (low) { + case 0x40: + PDEBUG(D_PROBE, "Sensor is a OV2610"); + sd->sensor = SEN_OV2610; + return; + case 0x41: + PDEBUG(D_PROBE, "Sensor is a OV2610AE"); + sd->sensor = SEN_OV2610AE; + return; + case 0xb1: + PDEBUG(D_PROBE, "Sensor is a OV9600"); + sd->sensor = SEN_OV9600; + return; + } + break; + case 0x36: + if ((low & 0x0f) == 0x00) { + PDEBUG(D_PROBE, "Sensor is a OV3610"); + sd->sensor = SEN_OV3610; + return; + } + break; } + pr_err("Error unknown sensor type: %02x%02x\n", high, low); } /* This initializes the OV8110, OV8610 sensor. The OV8110 uses @@ -2735,7 +2786,7 @@ static void ov8xx0_configure(struct sd *sd) if ((rc & 3) == 1) sd->sensor = SEN_OV8610; else - err("Unknown image sensor version: %d", rc & 3); + pr_err("Unknown image sensor version: %d\n", rc & 3); } /* This initializes the OV7610, OV7620, or OV76BE sensor. The OV76BE uses @@ -2792,8 +2843,8 @@ static void ov7xx0_configure(struct sd *sd) if (high == 0x76) { switch (low) { case 0x30: - err("Sensor is an OV7630/OV7635"); - err("7630 is not supported by this driver"); + pr_err("Sensor is an OV7630/OV7635\n"); + pr_err("7630 is not supported by this driver\n"); return; case 0x40: PDEBUG(D_PROBE, "Sensor is an OV7645"); @@ -2810,7 +2861,6 @@ static void ov7xx0_configure(struct sd *sd) case 0x60: PDEBUG(D_PROBE, "Sensor is a OV7660"); sd->sensor = SEN_OV7660; - sd->invert_led = 0; break; default: PDEBUG(D_PROBE, "Unknown sensor: 0x76%x", low); @@ -2821,7 +2871,7 @@ static void ov7xx0_configure(struct sd *sd) sd->sensor = SEN_OV7620; } } else { - err("Unknown image sensor version: %d", rc & 3); + pr_err("Unknown image sensor version: %d\n", rc & 3); } } @@ -2844,8 +2894,7 @@ static void ov6xx0_configure(struct sd *sd) switch (rc) { case 0x00: sd->sensor = SEN_OV6630; - warn("WARNING: Sensor is an OV66308. Your camera may have"); - warn("been misdetected in previous driver versions."); + pr_warn("WARNING: Sensor is an OV66308. Your camera may have been misdetected in previous driver versions.\n"); break; case 0x01: sd->sensor = SEN_OV6620; @@ -2861,11 +2910,10 @@ static void ov6xx0_configure(struct sd *sd) break; case 0x90: sd->sensor = SEN_OV6630; - warn("WARNING: Sensor is an OV66307. Your camera may have"); - warn("been misdetected in previous driver versions."); + pr_warn("WARNING: Sensor is an OV66307. Your camera may have been misdetected in previous driver versions.\n"); break; default: - err("FATAL: Unknown sensor version: 0x%02x", rc); + pr_err("FATAL: Unknown sensor version: 0x%02x\n", rc); return; } @@ -3289,7 +3337,6 @@ static int sd_config(struct gspca_dev *gspca_dev, case BRIDGE_OV519: cam->cam_mode = ov519_vga_mode; cam->nmodes = ARRAY_SIZE(ov519_vga_mode); - sd->invert_led = !sd->invert_led; break; case BRIDGE_OVFX2: cam->cam_mode = ov519_vga_mode; @@ -3359,7 +3406,7 @@ static int sd_init(struct gspca_dev *gspca_dev) } else if (init_ov_sensor(sd, OV_HIRES_SID) >= 0) { ov_hires_configure(sd); } else { - err("Can't determine sensor slave IDs"); + pr_err("Can't determine sensor slave IDs\n"); goto error; } @@ -3400,6 +3447,10 @@ static int sd_init(struct gspca_dev *gspca_dev) cam->cam_mode = ovfx2_ov3610_mode; cam->nmodes = ARRAY_SIZE(ovfx2_ov3610_mode); break; + case SEN_OV9600: + cam->cam_mode = ovfx2_ov9600_mode; + cam->nmodes = ARRAY_SIZE(ovfx2_ov9600_mode); + break; default: if (sd->sif) { cam->cam_mode = ov519_sif_mode; @@ -3497,6 +3548,12 @@ static int sd_init(struct gspca_dev *gspca_dev) case SEN_OV8610: write_i2c_regvals(sd, norm_8610, ARRAY_SIZE(norm_8610)); break; + case SEN_OV9600: + write_i2c_regvals(sd, norm_9600, ARRAY_SIZE(norm_9600)); + + /* enable autoexpo */ +/* i2c_w_mask(sd, 0x13, 0x05, 0x05); */ + break; } return gspca_dev->usb_err; error: @@ -3534,7 +3591,7 @@ static void ov511_mode_init_regs(struct sd *sd) intf = usb_ifnum_to_if(sd->gspca_dev.dev, sd->gspca_dev.iface); alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt); if (!alt) { - err("Couldn't get altsetting"); + pr_err("Couldn't get altsetting\n"); sd->gspca_dev.usb_err = -EIO; return; } @@ -3657,7 +3714,7 @@ static void ov518_mode_init_regs(struct sd *sd) intf = usb_ifnum_to_if(sd->gspca_dev.dev, sd->gspca_dev.iface); alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt); if (!alt) { - err("Couldn't get altsetting"); + pr_err("Couldn't get altsetting\n"); sd->gspca_dev.usb_err = -EIO; return; } @@ -4085,6 +4142,33 @@ static void mode_init_ov_sensor_regs(struct sd *sd) i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20); i2c_w_mask(sd, 0x12, 0x04, 0x06); /* AWB: 1 Test pattern: 0 */ break; + case SEN_OV9600: { + const struct ov_i2c_regvals *vals; + static const struct ov_i2c_regvals sxga_15[] = { + {0x11, 0x80}, {0x14, 0x3e}, {0x24, 0x85}, {0x25, 0x75} + }; + static const struct ov_i2c_regvals sxga_7_5[] = { + {0x11, 0x81}, {0x14, 0x3e}, {0x24, 0x85}, {0x25, 0x75} + }; + static const struct ov_i2c_regvals vga_30[] = { + {0x11, 0x81}, {0x14, 0x7e}, {0x24, 0x70}, {0x25, 0x60} + }; + static const struct ov_i2c_regvals vga_15[] = { + {0x11, 0x83}, {0x14, 0x3e}, {0x24, 0x80}, {0x25, 0x70} + }; + + /* frame rates: + * 15fps / 7.5 fps for 1280x1024 + * 30fps / 15fps for 640x480 + */ + i2c_w_mask(sd, 0x12, qvga ? 0x40 : 0x00, 0x40); + if (qvga) + vals = sd->frame_rate < 30 ? vga_15 : vga_30; + else + vals = sd->frame_rate < 15 ? sxga_7_5 : sxga_15; + write_i2c_regvals(sd, vals, ARRAY_SIZE(sxga_15)); + return; + } default: return; } @@ -4120,6 +4204,7 @@ static void set_ov_sensor_window(struct sd *sd) case SEN_OV2610AE: case SEN_OV3610: case SEN_OV7670: + case SEN_OV9600: mode_init_ov_sensor_regs(sd); return; case SEN_OV7660: @@ -4919,23 +5004,24 @@ static const struct sd_desc sd_desc = { /* -- module initialisation -- */ static const struct usb_device_id device_table[] = { {USB_DEVICE(0x041e, 0x4003), .driver_info = BRIDGE_W9968CF }, - {USB_DEVICE(0x041e, 0x4052), .driver_info = BRIDGE_OV519 }, + {USB_DEVICE(0x041e, 0x4052), + .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED }, {USB_DEVICE(0x041e, 0x405f), .driver_info = BRIDGE_OV519 }, {USB_DEVICE(0x041e, 0x4060), .driver_info = BRIDGE_OV519 }, {USB_DEVICE(0x041e, 0x4061), .driver_info = BRIDGE_OV519 }, - {USB_DEVICE(0x041e, 0x4064), - .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED }, + {USB_DEVICE(0x041e, 0x4064), .driver_info = BRIDGE_OV519 }, {USB_DEVICE(0x041e, 0x4067), .driver_info = BRIDGE_OV519 }, - {USB_DEVICE(0x041e, 0x4068), + {USB_DEVICE(0x041e, 0x4068), .driver_info = BRIDGE_OV519 }, + {USB_DEVICE(0x045e, 0x028c), .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED }, - {USB_DEVICE(0x045e, 0x028c), .driver_info = BRIDGE_OV519 }, {USB_DEVICE(0x054c, 0x0154), .driver_info = BRIDGE_OV519 }, - {USB_DEVICE(0x054c, 0x0155), - .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED }, + {USB_DEVICE(0x054c, 0x0155), .driver_info = BRIDGE_OV519 }, {USB_DEVICE(0x05a9, 0x0511), .driver_info = BRIDGE_OV511 }, {USB_DEVICE(0x05a9, 0x0518), .driver_info = BRIDGE_OV518 }, - {USB_DEVICE(0x05a9, 0x0519), .driver_info = BRIDGE_OV519 }, - {USB_DEVICE(0x05a9, 0x0530), .driver_info = BRIDGE_OV519 }, + {USB_DEVICE(0x05a9, 0x0519), + .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED }, + {USB_DEVICE(0x05a9, 0x0530), + .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED }, {USB_DEVICE(0x05a9, 0x2800), .driver_info = BRIDGE_OVFX2 }, {USB_DEVICE(0x05a9, 0x4519), .driver_info = BRIDGE_OV519 }, {USB_DEVICE(0x05a9, 0x8519), .driver_info = BRIDGE_OV519 }, |