aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/can/sja1000
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/can/sja1000')
-rw-r--r--drivers/net/can/sja1000/Kconfig14
-rw-r--r--drivers/net/can/sja1000/Makefile2
-rw-r--r--drivers/net/can/sja1000/plx_pci.c8
-rw-r--r--drivers/net/can/sja1000/sja1000.c34
-rw-r--r--drivers/net/can/sja1000/sja1000.h5
-rw-r--r--drivers/net/can/sja1000/sja1000_of_platform.c34
6 files changed, 61 insertions, 36 deletions
diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig
index 6fdc031..fe9e64d 100644
--- a/drivers/net/can/sja1000/Kconfig
+++ b/drivers/net/can/sja1000/Kconfig
@@ -29,6 +29,13 @@ config CAN_SJA1000_OF_PLATFORM
OpenFirmware bindings, e.g. if you have a PowerPC based system
you may want to enable this option.
+config CAN_EMS_PCMCIA
+ tristate "EMS CPC-CARD Card"
+ depends on PCMCIA
+ ---help---
+ This driver is for the one or two channel CPC-CARD cards from
+ EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
+
config CAN_EMS_PCI
tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card"
depends on PCI
@@ -37,6 +44,13 @@ config CAN_EMS_PCI
CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
(http://www.ems-wuensche.de).
+config CAN_PEAK_PCI
+ tristate "PEAK PCAN PCI/PCIe Cards"
+ depends on PCI
+ ---help---
+ This driver is for the PCAN PCI/PCIe cards (1, 2, 3 or 4 channels)
+ from PEAK Systems (http://www.peak-system.com).
+
config CAN_KVASER_PCI
tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
depends on PCI
diff --git a/drivers/net/can/sja1000/Makefile b/drivers/net/can/sja1000/Makefile
index 2c591eb..0604f24 100644
--- a/drivers/net/can/sja1000/Makefile
+++ b/drivers/net/can/sja1000/Makefile
@@ -6,8 +6,10 @@ obj-$(CONFIG_CAN_SJA1000) += sja1000.o
obj-$(CONFIG_CAN_SJA1000_ISA) += sja1000_isa.o
obj-$(CONFIG_CAN_SJA1000_PLATFORM) += sja1000_platform.o
obj-$(CONFIG_CAN_SJA1000_OF_PLATFORM) += sja1000_of_platform.o
+obj-$(CONFIG_CAN_EMS_PCMCIA) += ems_pcmcia.o
obj-$(CONFIG_CAN_EMS_PCI) += ems_pci.o
obj-$(CONFIG_CAN_KVASER_PCI) += kvaser_pci.o
+obj-$(CONFIG_CAN_PEAK_PCI) += peak_pci.o
obj-$(CONFIG_CAN_PLX_PCI) += plx_pci.o
obj-$(CONFIG_CAN_TSCAN1) += tscan1.o
diff --git a/drivers/net/can/sja1000/plx_pci.c b/drivers/net/can/sja1000/plx_pci.c
index 231385b..c31c2d6 100644
--- a/drivers/net/can/sja1000/plx_pci.c
+++ b/drivers/net/can/sja1000/plx_pci.c
@@ -309,7 +309,7 @@ static inline int plx_pci_check_sja1000(const struct sja1000_priv *priv)
*/
if ((priv->read_reg(priv, REG_CR) & REG_CR_BASICCAN_INITIAL_MASK) ==
REG_CR_BASICCAN_INITIAL &&
- (priv->read_reg(priv, REG_SR) == REG_SR_BASICCAN_INITIAL) &&
+ (priv->read_reg(priv, SJA1000_REG_SR) == REG_SR_BASICCAN_INITIAL) &&
(priv->read_reg(priv, REG_IR) == REG_IR_BASICCAN_INITIAL))
flag = 1;
@@ -321,7 +321,7 @@ static inline int plx_pci_check_sja1000(const struct sja1000_priv *priv)
* See states on p. 23 of the Datasheet.
*/
if (priv->read_reg(priv, REG_MOD) == REG_MOD_PELICAN_INITIAL &&
- priv->read_reg(priv, REG_SR) == REG_SR_PELICAN_INITIAL &&
+ priv->read_reg(priv, SJA1000_REG_SR) == REG_SR_PELICAN_INITIAL &&
priv->read_reg(priv, REG_IR) == REG_IR_PELICAN_INITIAL)
return flag;
@@ -408,7 +408,7 @@ static void plx_pci_del_card(struct pci_dev *pdev)
struct sja1000_priv *priv;
int i = 0;
- for (i = 0; i < card->channels; i++) {
+ for (i = 0; i < PLX_PCI_MAX_CHAN; i++) {
dev = card->net_dev[i];
if (!dev)
continue;
@@ -536,7 +536,6 @@ static int __devinit plx_pci_add_card(struct pci_dev *pdev,
if (err) {
dev_err(&pdev->dev, "Registering device failed "
"(err=%d)\n", err);
- free_sja1000dev(dev);
goto failure_cleanup;
}
@@ -549,6 +548,7 @@ static int __devinit plx_pci_add_card(struct pci_dev *pdev,
dev_err(&pdev->dev, "Channel #%d not detected\n",
i + 1);
free_sja1000dev(dev);
+ card->net_dev[i] = NULL;
}
}
diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
index f501bba..568b821 100644
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -40,8 +40,6 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
* DAMAGE.
*
- * Send feedback to <socketcan-users@lists.berlios.de>
- *
*/
#include <linux/module.h>
@@ -93,15 +91,20 @@ static void sja1000_write_cmdreg(struct sja1000_priv *priv, u8 val)
*/
spin_lock_irqsave(&priv->cmdreg_lock, flags);
priv->write_reg(priv, REG_CMR, val);
- priv->read_reg(priv, REG_SR);
+ priv->read_reg(priv, SJA1000_REG_SR);
spin_unlock_irqrestore(&priv->cmdreg_lock, flags);
}
+static int sja1000_is_absent(struct sja1000_priv *priv)
+{
+ return (priv->read_reg(priv, REG_MOD) == 0xFF);
+}
+
static int sja1000_probe_chip(struct net_device *dev)
{
struct sja1000_priv *priv = netdev_priv(dev);
- if (priv->reg_base && (priv->read_reg(priv, 0) == 0xFF)) {
+ if (priv->reg_base && sja1000_is_absent(priv)) {
printk(KERN_INFO "%s: probing @0x%lX failed\n",
DRV_NAME, dev->base_addr);
return 0;
@@ -485,16 +488,19 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id)
uint8_t isrc, status;
int n = 0;
- /* Shared interrupts and IRQ off? */
- if (priv->read_reg(priv, REG_IER) == IRQ_OFF)
- return IRQ_NONE;
-
if (priv->pre_irq)
priv->pre_irq(priv);
+ /* Shared interrupts and IRQ off? */
+ if (priv->read_reg(priv, REG_IER) == IRQ_OFF)
+ goto out;
+
while ((isrc = priv->read_reg(priv, REG_IR)) && (n < SJA1000_MAX_IRQ)) {
- n++;
- status = priv->read_reg(priv, REG_SR);
+
+ status = priv->read_reg(priv, SJA1000_REG_SR);
+ /* check for absent controller due to hw unplug */
+ if (status == 0xFF && sja1000_is_absent(priv))
+ goto out;
if (isrc & IRQ_WUI)
dev_warn(dev->dev.parent, "wakeup interrupt\n");
@@ -510,7 +516,10 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id)
/* receive interrupt */
while (status & SR_RBS) {
sja1000_rx(dev);
- status = priv->read_reg(priv, REG_SR);
+ status = priv->read_reg(priv, SJA1000_REG_SR);
+ /* check for absent controller */
+ if (status == 0xFF && sja1000_is_absent(priv))
+ goto out;
}
}
if (isrc & (IRQ_DOI | IRQ_EI | IRQ_BEI | IRQ_EPI | IRQ_ALI)) {
@@ -518,8 +527,9 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id)
if (sja1000_err(dev, isrc, status))
break;
}
+ n++;
}
-
+out:
if (priv->post_irq)
priv->post_irq(priv);
diff --git a/drivers/net/can/sja1000/sja1000.h b/drivers/net/can/sja1000/sja1000.h
index de8e778..2a79543 100644
--- a/drivers/net/can/sja1000/sja1000.h
+++ b/drivers/net/can/sja1000/sja1000.h
@@ -40,13 +40,12 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
* DAMAGE.
*
- * Send feedback to <socketcan-users@lists.berlios.de>
- *
*/
#ifndef SJA1000_DEV_H
#define SJA1000_DEV_H
+#include <linux/irqreturn.h>
#include <linux/can/dev.h>
#include <linux/can/platform/sja1000.h>
@@ -57,7 +56,7 @@
/* SJA1000 registers - manual section 6.4 (Pelican Mode) */
#define REG_MOD 0x00
#define REG_CMR 0x01
-#define REG_SR 0x02
+#define SJA1000_REG_SR 0x02
#define REG_IR 0x03
#define REG_IER 0x04
#define REG_ALC 0x0B
diff --git a/drivers/net/can/sja1000/sja1000_of_platform.c b/drivers/net/can/sja1000/sja1000_of_platform.c
index 9793df6..1ee5f0c 100644
--- a/drivers/net/can/sja1000/sja1000_of_platform.c
+++ b/drivers/net/can/sja1000/sja1000_of_platform.c
@@ -29,7 +29,7 @@
* nxp,external-clock-frequency = <16000000>;
* };
*
- * See "Documentation/powerpc/dts-bindings/can/sja1000.txt" for further
+ * See "Documentation/devicetree/bindings/net/can/sja1000.txt" for further
* information.
*/
@@ -38,6 +38,7 @@
#include <linux/interrupt.h>
#include <linux/netdevice.h>
#include <linux/delay.h>
+#include <linux/io.h>
#include <linux/can/dev.h>
#include <linux/of_platform.h>
@@ -93,8 +94,8 @@ static int __devinit sja1000_ofp_probe(struct platform_device *ofdev)
struct net_device *dev;
struct sja1000_priv *priv;
struct resource res;
- const u32 *prop;
- int err, irq, res_size, prop_size;
+ u32 prop;
+ int err, irq, res_size;
void __iomem *base;
err = of_address_to_resource(np, 0, &res);
@@ -135,27 +136,27 @@ static int __devinit sja1000_ofp_probe(struct platform_device *ofdev)
priv->read_reg = sja1000_ofp_read_reg;
priv->write_reg = sja1000_ofp_write_reg;
- prop = of_get_property(np, "nxp,external-clock-frequency", &prop_size);
- if (prop && (prop_size == sizeof(u32)))
- priv->can.clock.freq = *prop / 2;
+ err = of_property_read_u32(np, "nxp,external-clock-frequency", &prop);
+ if (!err)
+ priv->can.clock.freq = prop / 2;
else
priv->can.clock.freq = SJA1000_OFP_CAN_CLOCK; /* default */
- prop = of_get_property(np, "nxp,tx-output-mode", &prop_size);
- if (prop && (prop_size == sizeof(u32)))
- priv->ocr |= *prop & OCR_MODE_MASK;
+ err = of_property_read_u32(np, "nxp,tx-output-mode", &prop);
+ if (!err)
+ priv->ocr |= prop & OCR_MODE_MASK;
else
priv->ocr |= OCR_MODE_NORMAL; /* default */
- prop = of_get_property(np, "nxp,tx-output-config", &prop_size);
- if (prop && (prop_size == sizeof(u32)))
- priv->ocr |= (*prop << OCR_TX_SHIFT) & OCR_TX_MASK;
+ err = of_property_read_u32(np, "nxp,tx-output-config", &prop);
+ if (!err)
+ priv->ocr |= (prop << OCR_TX_SHIFT) & OCR_TX_MASK;
else
priv->ocr |= OCR_TX0_PULLDOWN; /* default */
- prop = of_get_property(np, "nxp,clock-out-frequency", &prop_size);
- if (prop && (prop_size == sizeof(u32)) && *prop) {
- u32 divider = priv->can.clock.freq * 2 / *prop;
+ err = of_property_read_u32(np, "nxp,clock-out-frequency", &prop);
+ if (!err && prop) {
+ u32 divider = priv->can.clock.freq * 2 / prop;
if (divider > 1)
priv->cdr |= divider / 2 - 1;
@@ -165,8 +166,7 @@ static int __devinit sja1000_ofp_probe(struct platform_device *ofdev)
priv->cdr |= CDR_CLK_OFF; /* default */
}
- prop = of_get_property(np, "nxp,no-comparator-bypass", NULL);
- if (!prop)
+ if (!of_property_read_bool(np, "nxp,no-comparator-bypass"))
priv->cdr |= CDR_CBP; /* default */
priv->irq_flags = IRQF_SHARED;
generated by cgit v1.1 at 2024-04-29 02:09:23 +0000