diff options
Diffstat (limited to 'drivers/net/ixgbe/ixgbe_x540.c')
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_x540.c | 43 |
1 files changed, 28 insertions, 15 deletions
diff --git a/drivers/net/ixgbe/ixgbe_x540.c b/drivers/net/ixgbe/ixgbe_x540.c index f2518b0..f47e93f 100644 --- a/drivers/net/ixgbe/ixgbe_x540.c +++ b/drivers/net/ixgbe/ixgbe_x540.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2010 Intel Corporation. + Copyright(c) 1999 - 2011 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -31,7 +31,6 @@ #include "ixgbe.h" #include "ixgbe_phy.h" -//#include "ixgbe_mbx.h" #define IXGBE_X540_MAX_TX_QUEUES 128 #define IXGBE_X540_MAX_RX_QUEUES 128 @@ -110,12 +109,9 @@ static s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw) * Prevent the PCI-E bus from from hanging by disabling PCI-E master * access and verify no pending requests before reset */ - status = ixgbe_disable_pcie_master(hw); - if (status != 0) { - status = IXGBE_ERR_MASTER_REQUESTS_PENDING; - hw_dbg(hw, "PCI-E Master disable polling has failed.\n"); - } + ixgbe_disable_pcie_master(hw); +mac_reset_top: /* * Issue global reset to the MAC. Needs to be SW reset if link is up. * If link reset is used when link is up, it might reset the PHY when @@ -148,6 +144,19 @@ static s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw) hw_dbg(hw, "Reset polling failed to complete.\n"); } + /* + * Double resets are required for recovery from certain error + * conditions. Between resets, it is necessary to stall to allow time + * for any pending HW events to complete. We use 1usec since that is + * what is needed for ixgbe_disable_pcie_master(). The second reset + * then clears out any effects of those events. + */ + if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) { + hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED; + udelay(1); + goto mac_reset_top; + } + /* Clear PF Reset Done bit so PF/VF Mail Ops can work */ ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT); ctrl_ext |= IXGBE_CTRL_EXT_PFRSTD; @@ -191,7 +200,7 @@ static s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw) * clear the multicast table. Also reset num_rar_entries to 128, * since we modify this value when programming the SAN MAC address. */ - hw->mac.num_rar_entries = 128; + hw->mac.num_rar_entries = IXGBE_X540_MAX_TX_QUEUES; hw->mac.ops.init_rx_addrs(hw); /* Store the permanent mac address */ @@ -242,8 +251,11 @@ static u32 ixgbe_get_supported_physical_layer_X540(struct ixgbe_hw *hw) } /** - * ixgbe_init_eeprom_params_X540 - Initialize EEPROM params - * @hw: pointer to hardware structure + * ixgbe_init_eeprom_params_X540 - Initialize EEPROM params + * @hw: pointer to hardware structure + * + * Initializes the EEPROM parameters ixgbe_eeprom_info within the + * ixgbe_hw struct in order to set up EEPROM access. **/ static s32 ixgbe_init_eeprom_params_X540(struct ixgbe_hw *hw) { @@ -262,7 +274,7 @@ static s32 ixgbe_init_eeprom_params_X540(struct ixgbe_hw *hw) IXGBE_EEPROM_WORD_SIZE_SHIFT); hw_dbg(hw, "Eeprom params: type = %d, size = %d\n", - eeprom->type, eeprom->word_size); + eeprom->type, eeprom->word_size); } return 0; @@ -278,7 +290,7 @@ static s32 ixgbe_read_eerd_X540(struct ixgbe_hw *hw, u16 offset, u16 *data) { s32 status; - if (ixgbe_acquire_swfw_sync_X540(hw, IXGBE_GSSR_EEP_SM) == 0) + if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0) status = ixgbe_read_eerd_generic(hw, offset, data); else status = IXGBE_ERR_SWFW_SYNC; @@ -311,7 +323,7 @@ static s32 ixgbe_write_eewr_X540(struct ixgbe_hw *hw, u16 offset, u16 data) (data << IXGBE_EEPROM_RW_REG_DATA) | IXGBE_EEPROM_RW_REG_START; - if (ixgbe_acquire_swfw_sync_X540(hw, IXGBE_GSSR_EEP_SM) == 0) { + if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0) { status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE); if (status != 0) { hw_dbg(hw, "Eeprom write EEWR timed out\n"); @@ -676,7 +688,6 @@ static struct ixgbe_mac_operations mac_ops_X540 = { .set_vmdq = &ixgbe_set_vmdq_generic, .clear_vmdq = &ixgbe_clear_vmdq_generic, .init_rx_addrs = &ixgbe_init_rx_addrs_generic, - .update_uc_addr_list = &ixgbe_update_uc_addr_list_generic, .update_mc_addr_list = &ixgbe_update_mc_addr_list_generic, .enable_mc = &ixgbe_enable_mc_generic, .disable_mc = &ixgbe_disable_mc_generic, @@ -687,6 +698,8 @@ static struct ixgbe_mac_operations mac_ops_X540 = { .setup_sfp = NULL, .set_mac_anti_spoofing = &ixgbe_set_mac_anti_spoofing, .set_vlan_anti_spoofing = &ixgbe_set_vlan_anti_spoofing, + .acquire_swfw_sync = &ixgbe_acquire_swfw_sync_X540, + .release_swfw_sync = &ixgbe_release_swfw_sync_X540, }; static struct ixgbe_eeprom_operations eeprom_ops_X540 = { @@ -702,7 +715,7 @@ static struct ixgbe_phy_operations phy_ops_X540 = { .identify = &ixgbe_identify_phy_generic, .identify_sfp = &ixgbe_identify_sfp_module_generic, .init = NULL, - .reset = &ixgbe_reset_phy_generic, + .reset = NULL, .read_reg = &ixgbe_read_phy_reg_generic, .write_reg = &ixgbe_write_phy_reg_generic, .setup_link = &ixgbe_setup_phy_link_generic, |