aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ixgbe
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ixgbe')
-rw-r--r--drivers/net/ixgbe/ixgbe.h7
-rw-r--r--drivers/net/ixgbe/ixgbe_82599.c112
-rw-r--r--drivers/net/ixgbe/ixgbe_ethtool.c22
-rw-r--r--drivers/net/ixgbe/ixgbe_fcoe.c40
-rw-r--r--drivers/net/ixgbe/ixgbe_main.c68
-rw-r--r--drivers/net/ixgbe/ixgbe_type.h4
6 files changed, 186 insertions, 67 deletions
diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h
index 19e94ee..79c35ae 100644
--- a/drivers/net/ixgbe/ixgbe.h
+++ b/drivers/net/ixgbe/ixgbe.h
@@ -204,14 +204,17 @@ enum ixgbe_ring_f_enum {
#define IXGBE_MAX_FDIR_INDICES 64
#ifdef IXGBE_FCOE
#define IXGBE_MAX_FCOE_INDICES 8
+#define MAX_RX_QUEUES (IXGBE_MAX_FDIR_INDICES + IXGBE_MAX_FCOE_INDICES)
+#define MAX_TX_QUEUES (IXGBE_MAX_FDIR_INDICES + IXGBE_MAX_FCOE_INDICES)
+#else
+#define MAX_RX_QUEUES IXGBE_MAX_FDIR_INDICES
+#define MAX_TX_QUEUES IXGBE_MAX_FDIR_INDICES
#endif /* IXGBE_FCOE */
struct ixgbe_ring_feature {
int indices;
int mask;
} ____cacheline_internodealigned_in_smp;
-#define MAX_RX_QUEUES 128
-#define MAX_TX_QUEUES 128
#define MAX_RX_PACKET_BUFFERS ((adapter->flags & IXGBE_FLAG_DCB_ENABLED) \
? 8 : 1)
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index 1f30e16..12fc0e7 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -39,6 +39,9 @@
#define IXGBE_82599_MC_TBL_SIZE 128
#define IXGBE_82599_VFT_TBL_SIZE 128
+void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
+void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
+void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
ixgbe_link_speed speed,
bool autoneg,
@@ -68,7 +71,15 @@ static void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw)
if (hw->phy.multispeed_fiber) {
/* Set up dual speed SFP+ support */
mac->ops.setup_link = &ixgbe_setup_mac_link_multispeed_fiber;
+ mac->ops.disable_tx_laser =
+ &ixgbe_disable_tx_laser_multispeed_fiber;
+ mac->ops.enable_tx_laser =
+ &ixgbe_enable_tx_laser_multispeed_fiber;
+ mac->ops.flap_tx_laser = &ixgbe_flap_tx_laser_multispeed_fiber;
} else {
+ mac->ops.disable_tx_laser = NULL;
+ mac->ops.enable_tx_laser = NULL;
+ mac->ops.flap_tx_laser = NULL;
if ((mac->ops.get_media_type(hw) ==
ixgbe_media_type_backplane) &&
(hw->phy.smart_speed == ixgbe_smart_speed_auto ||
@@ -412,6 +423,67 @@ s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw,
return status;
}
+ /**
+ * ixgbe_disable_tx_laser_multispeed_fiber - Disable Tx laser
+ * @hw: pointer to hardware structure
+ *
+ * The base drivers may require better control over SFP+ module
+ * PHY states. This includes selectively shutting down the Tx
+ * laser on the PHY, effectively halting physical link.
+ **/
+void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
+{
+ u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
+
+ /* Disable tx laser; allow 100us to go dark per spec */
+ esdp_reg |= IXGBE_ESDP_SDP3;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+ IXGBE_WRITE_FLUSH(hw);
+ udelay(100);
+}
+
+/**
+ * ixgbe_enable_tx_laser_multispeed_fiber - Enable Tx laser
+ * @hw: pointer to hardware structure
+ *
+ * The base drivers may require better control over SFP+ module
+ * PHY states. This includes selectively turning on the Tx
+ * laser on the PHY, effectively starting physical link.
+ **/
+void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
+{
+ u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
+
+ /* Enable tx laser; allow 100ms to light up */
+ esdp_reg &= ~IXGBE_ESDP_SDP3;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+ IXGBE_WRITE_FLUSH(hw);
+ msleep(100);
+}
+
+/**
+ * ixgbe_flap_tx_laser_multispeed_fiber - Flap Tx laser
+ * @hw: pointer to hardware structure
+ *
+ * When the driver changes the link speeds that it can support,
+ * it sets autotry_restart to true to indicate that we need to
+ * initiate a new autotry session with the link partner. To do
+ * so, we set the speed then disable and re-enable the tx laser, to
+ * alert the link partner that it also needs to restart autotry on its
+ * end. This is consistent with true clause 37 autoneg, which also
+ * involves a loss of signal.
+ **/
+void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
+{
+ hw_dbg(hw, "ixgbe_flap_tx_laser_multispeed_fiber\n");
+
+ if (hw->mac.autotry_restart) {
+ ixgbe_disable_tx_laser_multispeed_fiber(hw);
+ ixgbe_enable_tx_laser_multispeed_fiber(hw);
+ hw->mac.autotry_restart = false;
+ }
+}
+
/**
* ixgbe_setup_mac_link_multispeed_fiber - Set MAC link speed
* @hw: pointer to hardware structure
@@ -440,16 +512,6 @@ s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
speed &= phy_link_speed;
/*
- * When the driver changes the link speeds that it can support,
- * it sets autotry_restart to true to indicate that we need to
- * initiate a new autotry session with the link partner. To do
- * so, we set the speed then disable and re-enable the tx laser, to
- * alert the link partner that it also needs to restart autotry on its
- * end. This is consistent with true clause 37 autoneg, which also
- * involves a loss of signal.
- */
-
- /*
* Try each speed one by one, highest priority first. We do this in
* software because 10gb fiber doesn't support speed autonegotiation.
*/
@@ -466,6 +528,7 @@ s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
/* Set the module link speed */
esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5);
IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+ IXGBE_WRITE_FLUSH(hw);
/* Allow module to change analog characteristics (1G->10G) */
msleep(40);
@@ -478,19 +541,7 @@ s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
return status;
/* Flap the tx laser if it has not already been done */
- if (hw->mac.autotry_restart) {
- /* Disable tx laser; allow 100us to go dark per spec */
- esdp_reg |= IXGBE_ESDP_SDP3;
- IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
- udelay(100);
-
- /* Enable tx laser; allow 2ms to light up per spec */
- esdp_reg &= ~IXGBE_ESDP_SDP3;
- IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
- msleep(2);
-
- hw->mac.autotry_restart = false;
- }
+ hw->mac.ops.flap_tx_laser(hw);
/*
* Wait for the controller to acquire link. Per IEEE 802.3ap,
@@ -525,6 +576,7 @@ s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
esdp_reg &= ~IXGBE_ESDP_SDP5;
esdp_reg |= IXGBE_ESDP_SDP5_DIR;
IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+ IXGBE_WRITE_FLUSH(hw);
/* Allow module to change analog characteristics (10G->1G) */
msleep(40);
@@ -537,19 +589,7 @@ s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
return status;
/* Flap the tx laser if it has not already been done */
- if (hw->mac.autotry_restart) {
- /* Disable tx laser; allow 100us to go dark per spec */
- esdp_reg |= IXGBE_ESDP_SDP3;
- IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
- udelay(100);
-
- /* Enable tx laser; allow 2ms to light up per spec */
- esdp_reg &= ~IXGBE_ESDP_SDP3;
- IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
- msleep(2);
-
- hw->mac.autotry_restart = false;
- }
+ hw->mac.ops.flap_tx_laser(hw);
/* Wait for the link partner to also set speed */
msleep(100);
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index 7949a44..8f461d5 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -29,6 +29,7 @@
#include <linux/types.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/netdevice.h>
#include <linux/ethtool.h>
@@ -1853,6 +1854,26 @@ static void ixgbe_diag_test(struct net_device *netdev,
if (ixgbe_link_test(adapter, &data[4]))
eth_test->flags |= ETH_TEST_FL_FAILED;
+ if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
+ int i;
+ for (i = 0; i < adapter->num_vfs; i++) {
+ if (adapter->vfinfo[i].clear_to_send) {
+ netdev_warn(netdev, "%s",
+ "offline diagnostic is not "
+ "supported when VFs are "
+ "present\n");
+ data[0] = 1;
+ data[1] = 1;
+ data[2] = 1;
+ data[3] = 1;
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+ clear_bit(__IXGBE_TESTING,
+ &adapter->state);
+ goto skip_ol_tests;
+ }
+ }
+ }
+
if (if_running)
/* indicate we're in test mode */
dev_close(netdev);
@@ -1908,6 +1929,7 @@ skip_loopback:
clear_bit(__IXGBE_TESTING, &adapter->state);
}
+skip_ol_tests:
msleep_interruptible(4 * 1000);
}
diff --git a/drivers/net/ixgbe/ixgbe_fcoe.c b/drivers/net/ixgbe/ixgbe_fcoe.c
index 4123dec..6493049 100644
--- a/drivers/net/ixgbe/ixgbe_fcoe.c
+++ b/drivers/net/ixgbe/ixgbe_fcoe.c
@@ -31,6 +31,7 @@
#include "ixgbe_dcb_82599.h"
#endif /* CONFIG_IXGBE_DCB */
#include <linux/if_ether.h>
+#include <linux/gfp.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <scsi/fc/fc_fs.h>
@@ -202,6 +203,15 @@ int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid,
addr = sg_dma_address(sg);
len = sg_dma_len(sg);
while (len) {
+ /* max number of buffers allowed in one DDP context */
+ if (j >= IXGBE_BUFFCNT_MAX) {
+ netif_err(adapter, drv, adapter->netdev,
+ "xid=%x:%d,%d,%d:addr=%llx "
+ "not enough descriptors\n",
+ xid, i, j, dmacount, (u64)addr);
+ goto out_noddp_free;
+ }
+
/* get the offset of length of current buffer */
thisoff = addr & ((dma_addr_t)bufflen - 1);
thislen = min((bufflen - thisoff), len);
@@ -227,20 +237,13 @@ int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid,
len -= thislen;
addr += thislen;
j++;
- /* max number of buffers allowed in one DDP context */
- if (j > IXGBE_BUFFCNT_MAX) {
- DPRINTK(DRV, ERR, "xid=%x:%d,%d,%d:addr=%llx "
- "not enough descriptors\n",
- xid, i, j, dmacount, (u64)addr);
- goto out_noddp_free;
- }
}
}
/* only the last buffer may have non-full bufflen */
lastsize = thisoff + thislen;
fcbuff = (IXGBE_FCBUFF_4KB << IXGBE_FCBUFF_BUFFSIZE_SHIFT);
- fcbuff |= (j << IXGBE_FCBUFF_BUFFCNT_SHIFT);
+ fcbuff |= ((j & 0xff) << IXGBE_FCBUFF_BUFFCNT_SHIFT);
fcbuff |= (firstoff << IXGBE_FCBUFF_OFFSET_SHIFT);
fcbuff |= (IXGBE_FCBUFF_VALID);
@@ -520,6 +523,9 @@ void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter)
/* Enable L2 eth type filter for FCoE */
IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_FCOE),
(ETH_P_FCOE | IXGBE_ETQF_FCOE | IXGBE_ETQF_FILTER_EN));
+ /* Enable L2 eth type filter for FIP */
+ IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_FIP),
+ (ETH_P_FIP | IXGBE_ETQF_FILTER_EN));
if (adapter->ring_feature[RING_F_FCOE].indices) {
/* Use multiple rx queues for FCoE by redirection table */
for (i = 0; i < IXGBE_FCRETA_SIZE; i++) {
@@ -530,6 +536,12 @@ void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter)
}
IXGBE_WRITE_REG(hw, IXGBE_FCRECTL, IXGBE_FCRECTL_ENA);
IXGBE_WRITE_REG(hw, IXGBE_ETQS(IXGBE_ETQF_FILTER_FCOE), 0);
+ fcoe_i = f->mask;
+ fcoe_i &= IXGBE_FCRETA_ENTRY_MASK;
+ fcoe_q = adapter->rx_ring[fcoe_i]->reg_idx;
+ IXGBE_WRITE_REG(hw, IXGBE_ETQS(IXGBE_ETQF_FILTER_FIP),
+ IXGBE_ETQS_QUEUE_EN |
+ (fcoe_q << IXGBE_ETQS_RX_QUEUE_SHIFT));
} else {
/* Use single rx queue for FCoE */
fcoe_i = f->mask;
@@ -539,6 +551,12 @@ void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter)
IXGBE_ETQS_QUEUE_EN |
(fcoe_q << IXGBE_ETQS_RX_QUEUE_SHIFT));
}
+ /* send FIP frames to the first FCoE queue */
+ fcoe_i = f->mask;
+ fcoe_q = adapter->rx_ring[fcoe_i]->reg_idx;
+ IXGBE_WRITE_REG(hw, IXGBE_ETQS(IXGBE_ETQF_FILTER_FIP),
+ IXGBE_ETQS_QUEUE_EN |
+ (fcoe_q << IXGBE_ETQS_RX_QUEUE_SHIFT));
IXGBE_WRITE_REG(hw, IXGBE_FCRXCTRL,
IXGBE_FCRXCTRL_FCOELLI |
@@ -614,9 +632,9 @@ int ixgbe_fcoe_enable(struct net_device *netdev)
netdev->vlan_features |= NETIF_F_FSO;
netdev->vlan_features |= NETIF_F_FCOE_MTU;
netdev->fcoe_ddp_xid = IXGBE_FCOE_DDP_MAX - 1;
- netdev_features_change(netdev);
ixgbe_init_interrupt_scheme(adapter);
+ netdev_features_change(netdev);
if (netif_running(netdev))
netdev->netdev_ops->ndo_open(netdev);
@@ -660,11 +678,11 @@ int ixgbe_fcoe_disable(struct net_device *netdev)
netdev->vlan_features &= ~NETIF_F_FSO;
netdev->vlan_features &= ~NETIF_F_FCOE_MTU;
netdev->fcoe_ddp_xid = 0;
- netdev_features_change(netdev);
ixgbe_cleanup_fcoe(adapter);
-
ixgbe_init_interrupt_scheme(adapter);
+ netdev_features_change(netdev);
+
if (netif_running(netdev))
netdev->netdev_ops->ndo_open(netdev);
rc = 0;
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 684af37..6c00ee4 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -36,6 +36,7 @@
#include <linux/tcp.h>
#include <linux/pkt_sched.h>
#include <linux/ipv6.h>
+#include <linux/slab.h>
#include <net/checksum.h>
#include <net/ip6_checksum.h>
#include <linux/ethtool.h>
@@ -935,10 +936,12 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
if (skb->prev)
skb = ixgbe_transform_rsc_queue(skb, &(rx_ring->rsc_count));
if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) {
- if (IXGBE_RSC_CB(skb)->dma)
+ if (IXGBE_RSC_CB(skb)->dma) {
pci_unmap_single(pdev, IXGBE_RSC_CB(skb)->dma,
rx_ring->rx_buf_len,
PCI_DMA_FROMDEVICE);
+ IXGBE_RSC_CB(skb)->dma = 0;
+ }
if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED)
rx_ring->rsc_count += skb_shinfo(skb)->nr_frags;
else
@@ -2979,6 +2982,10 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
else
ixgbe_configure_msi_and_legacy(adapter);
+ /* enable the optics */
+ if (hw->phy.multispeed_fiber)
+ hw->mac.ops.enable_tx_laser(hw);
+
clear_bit(__IXGBE_DOWN, &adapter->state);
ixgbe_napi_enable_all(adapter);
@@ -3054,6 +3061,14 @@ void ixgbe_reinit_locked(struct ixgbe_adapter *adapter)
while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state))
msleep(1);
ixgbe_down(adapter);
+ /*
+ * If SR-IOV enabled then wait a bit before bringing the adapter
+ * back up to give the VFs time to respond to the reset. The
+ * two second wait is based upon the watchdog timer cycle in
+ * the VF driver.
+ */
+ if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)
+ msleep(2000);
ixgbe_up(adapter);
clear_bit(__IXGBE_RESETTING, &adapter->state);
}
@@ -3126,10 +3141,12 @@ static void ixgbe_clean_rx_ring(struct ixgbe_adapter *adapter,
rx_buffer_info->skb = NULL;
do {
struct sk_buff *this = skb;
- if (IXGBE_RSC_CB(this)->dma)
+ if (IXGBE_RSC_CB(this)->dma) {
pci_unmap_single(pdev, IXGBE_RSC_CB(this)->dma,
rx_ring->rx_buf_len,
PCI_DMA_FROMDEVICE);
+ IXGBE_RSC_CB(this)->dma = 0;
+ }
skb = skb->prev;
dev_kfree_skb(this);
} while (skb);
@@ -3230,15 +3247,21 @@ void ixgbe_down(struct ixgbe_adapter *adapter)
/* signal that we are down to the interrupt handler */
set_bit(__IXGBE_DOWN, &adapter->state);
+ /* power down the optics */
+ if (hw->phy.multispeed_fiber)
+ hw->mac.ops.disable_tx_laser(hw);
+
/* disable receive for all VFs and wait one second */
if (adapter->num_vfs) {
- for (i = 0 ; i < adapter->num_vfs; i++)
- adapter->vfinfo[i].clear_to_send = 0;
-
/* ping all the active vfs to let them know we are going down */
ixgbe_ping_all_vfs(adapter);
+
/* Disable all VFTE/VFRE TX/RX */
ixgbe_disable_tx_rx(adapter);
+
+ /* Mark all the VFs as inactive */
+ for (i = 0 ; i < adapter->num_vfs; i++)
+ adapter->vfinfo[i].clear_to_send = 0;
}
/* disable receives */
@@ -5018,6 +5041,7 @@ static void ixgbe_multispeed_fiber_task(struct work_struct *work)
autoneg = hw->phy.autoneg_advertised;
if ((!autoneg) && (hw->mac.ops.get_link_capabilities))
hw->mac.ops.get_link_capabilities(hw, &autoneg, &negotiation);
+ hw->mac.autotry_restart = false;
if (hw->mac.ops.setup_link)
hw->mac.ops.setup_link(hw, autoneg, negotiation, true);
adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE;
@@ -5633,7 +5657,8 @@ static u16 ixgbe_select_queue(struct net_device *dev, struct sk_buff *skb)
#ifdef IXGBE_FCOE
if ((adapter->flags & IXGBE_FLAG_FCOE_ENABLED) &&
- (skb->protocol == htons(ETH_P_FCOE))) {
+ ((skb->protocol == htons(ETH_P_FCOE)) ||
+ (skb->protocol == htons(ETH_P_FIP)))) {
txq &= (adapter->ring_feature[RING_F_FCOE].indices - 1);
txq += adapter->ring_feature[RING_F_FCOE].mask;
return txq;
@@ -5680,18 +5705,25 @@ static netdev_tx_t ixgbe_xmit_frame(struct sk_buff *skb,
tx_ring = adapter->tx_ring[skb->queue_mapping];
- if ((adapter->flags & IXGBE_FLAG_FCOE_ENABLED) &&
- (skb->protocol == htons(ETH_P_FCOE))) {
- tx_flags |= IXGBE_TX_FLAGS_FCOE;
#ifdef IXGBE_FCOE
+ if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
#ifdef CONFIG_IXGBE_DCB
- tx_flags &= ~(IXGBE_TX_FLAGS_VLAN_PRIO_MASK
- << IXGBE_TX_FLAGS_VLAN_SHIFT);
- tx_flags |= ((adapter->fcoe.up << 13)
- << IXGBE_TX_FLAGS_VLAN_SHIFT);
-#endif
+ /* for FCoE with DCB, we force the priority to what
+ * was specified by the switch */
+ if ((skb->protocol == htons(ETH_P_FCOE)) ||
+ (skb->protocol == htons(ETH_P_FIP))) {
+ tx_flags &= ~(IXGBE_TX_FLAGS_VLAN_PRIO_MASK
+ << IXGBE_TX_FLAGS_VLAN_SHIFT);
+ tx_flags |= ((adapter->fcoe.up << 13)
+ << IXGBE_TX_FLAGS_VLAN_SHIFT);
+ }
#endif
+ /* flag for FCoE offloads */
+ if (skb->protocol == htons(ETH_P_FCOE))
+ tx_flags |= IXGBE_TX_FLAGS_FCOE;
}
+#endif
+
/* four things can cause us to need a context descriptor */
if (skb_is_gso(skb) ||
(skb->ip_summed == CHECKSUM_PARTIAL) ||
@@ -6046,7 +6078,6 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
indices += min_t(unsigned int, num_possible_cpus(),
IXGBE_MAX_FCOE_INDICES);
#endif
- indices = min_t(unsigned int, indices, MAX_TX_QUEUES);
netdev = alloc_etherdev_mq(sizeof(struct ixgbe_adapter), indices);
if (!netdev) {
err = -ENOMEM;
@@ -6230,6 +6261,10 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
goto err_eeprom;
}
+ /* power down the optics */
+ if (hw->phy.multispeed_fiber)
+ hw->mac.ops.disable_tx_laser(hw);
+
init_timer(&adapter->watchdog_timer);
adapter->watchdog_timer.function = &ixgbe_watchdog;
adapter->watchdog_timer.data = (unsigned long)adapter;
@@ -6245,9 +6280,6 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
case IXGBE_DEV_ID_82599_KX4:
adapter->wol = (IXGBE_WUFC_MAG | IXGBE_WUFC_EX |
IXGBE_WUFC_MC | IXGBE_WUFC_BC);
- /* Enable ACPI wakeup in GRC */
- IXGBE_WRITE_REG(hw, IXGBE_GRC,
- (IXGBE_READ_REG(hw, IXGBE_GRC) & ~IXGBE_GRC_APME));
break;
default:
adapter->wol = 0;
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index 2be9074..534affc 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -1298,6 +1298,7 @@
#define IXGBE_ETQF_FILTER_BCN 1
#define IXGBE_ETQF_FILTER_FCOE 2
#define IXGBE_ETQF_FILTER_1588 3
+#define IXGBE_ETQF_FILTER_FIP 4
/* VLAN Control Bit Masks */
#define IXGBE_VLNCTRL_VET 0x0000FFFF /* bits 0-15 */
#define IXGBE_VLNCTRL_CFI 0x10000000 /* bit 28 */
@@ -2397,6 +2398,9 @@ struct ixgbe_mac_operations {
s32 (*enable_rx_dma)(struct ixgbe_hw *, u32);
/* Link */
+ void (*disable_tx_laser)(struct ixgbe_hw *);
+ void (*enable_tx_laser)(struct ixgbe_hw *);
+ void (*flap_tx_laser)(struct ixgbe_hw *);
s32 (*setup_link)(struct ixgbe_hw *, ixgbe_link_speed, bool, bool);
s32 (*check_link)(struct ixgbe_hw *, ixgbe_link_speed *, bool *, bool);
s32 (*get_link_capabilities)(struct ixgbe_hw *, ixgbe_link_speed *,
generated by cgit v1.1 at 2024-09-22 16:57:29 +0000