aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/bcmdhd/dhd_sec_feature.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/bcmdhd/dhd_sec_feature.h')
-rw-r--r--drivers/net/wireless/bcmdhd/dhd_sec_feature.h120
1 files changed, 120 insertions, 0 deletions
diff --git a/drivers/net/wireless/bcmdhd/dhd_sec_feature.h b/drivers/net/wireless/bcmdhd/dhd_sec_feature.h
new file mode 100644
index 0000000..071340e
--- /dev/null
+++ b/drivers/net/wireless/bcmdhd/dhd_sec_feature.h
@@ -0,0 +1,120 @@
+/*
+ * Header file describing the internal (inter-module) DHD interfaces.
+ *
+ * Provides type definitions and function prototypes used to link the
+ * DHD OS, bus, and protocol modules.
+ *
+ * Copyright (C) 1999-2012, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: dhd_sec_feature.h 309548 2012-01-20 01:13:08Z $
+ */
+
+/* PROJECTS */
+
+#if defined(CONFIG_MACH_SAMSUNG_ESPRESSO)\
+ || defined(CONFIG_MACH_SAMSUNG_ESPRESSO_10)
+#define READ_MACADDR
+#define HW_OOB
+#endif
+
+/* Q1 also uses this feature */
+#if defined(CONFIG_MACH_U1) || defined(CONFIG_MACH_TRATS)
+#ifdef CONFIG_MACH_Q1_BD
+#define HW_OOB
+#endif
+#define USE_CID_CHECK
+#define WRITE_MACADDR
+#endif
+
+#ifdef CONFIG_ARCH_MSM7X30
+#define HW_OOB
+#define READ_MACADDR
+#endif
+
+#ifdef CONFIG_MACH_GC1
+#undef USE_CID_CHECK
+#define READ_MACADDR
+#endif
+
+#ifdef CONFIG_MACH_P10
+#define READ_MACADDR
+#endif
+
+#ifdef CONFIG_ARCH_MSM8960
+#undef WIFI_TURNOFF_DELAY
+#define WIFI_TURNOFF_DELAY 200
+#endif
+
+/* REGION CODE */
+
+#if (WLAN_REGION_CODE >= 100) && (WLAN_REGION_CODE < 200) /*EUR*/
+#if (WLAN_REGION_CODE == 101) /*EUR ORG*/
+;/* GAN LITE NAT KEEPALIVE FILTER */
+#define GAN_LITE_NAT_KEEPALIVE_FILTER
+#endif
+#endif
+
+#if (WLAN_REGION_CODE >= 200) && (WLAN_REGION_CODE < 300) /* KOR */
+#undef USE_INITIAL_2G_SCAN_ORG
+#ifndef ROAM_ENABLE
+#define ROAM_ENABLE
+#endif
+#ifndef ROAM_API
+#define ROAM_API
+#endif
+#ifndef ROAM_CHANNEL_CACHE
+#define ROAM_CHANNEL_CACHE
+#endif
+#ifndef OKC_SUPPORT
+#define OKC_SUPPORT
+#endif
+
+
+#undef WRITE_MACADDR
+#undef READ_MACADDR
+#ifdef CONFIG_BCM4334
+#define READ_MACADDR
+#else
+#define RDWR_MACADDR
+#endif
+
+#if (WLAN_REGION_CODE == 201) /* SKT */
+#endif
+
+#if (WLAN_REGION_CODE == 202) /* KTT */
+#define VLAN_MODE_OFF
+#define KEEP_ALIVE_PACKET_PERIOD_30_SEC
+#define FULL_ROAMING_SCAN_PERIOD_60_SEC
+#endif
+
+#if (WLAN_REGION_CODE == 203) /* LGT */
+#endif
+#endif
+
+#if (WLAN_REGION_CODE >= 300) && (WLAN_REGION_CODE < 400) /* CHN */
+#define BCMWAPI_WPI
+#define BCMWAPI_WAI
+#endif
+
+#if !defined(READ_MACADDR) && !defined(WRITE_MACADDR) && !defined(RDWR_KORICS_MACADDR) && !defined(RDWR_MACADDR)
+#define GET_MAC_FROM_OTP
+#endif
+