aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/iwlwifi/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/iwlwifi/Kconfig')
-rw-r--r--drivers/net/wireless/iwlwifi/Kconfig169
1 files changed, 100 insertions, 69 deletions
diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig
index 8d52a26..74243fe 100644
--- a/drivers/net/wireless/iwlwifi/Kconfig
+++ b/drivers/net/wireless/iwlwifi/Kconfig
@@ -1,107 +1,95 @@
-config IWLWIFI
- bool "Intel Wireless WiFi Link Drivers"
- depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
+config IWL4965
+ tristate "Intel Wireless WiFi 4965AGN"
+ depends on m && PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
select FW_LOADER
- default n
- ---help---
- Select to enable drivers based on the iwlwifi project. This
- project provides a common foundation for Intel's wireless
- drivers designed to use the mac80211 subsystem.
-
- See <file:Documentation/networking/README.iwlwifi> for
- information on the capabilities currently enabled in this
- driver and for tips for debugging issues and problems.
-
-config IWLWIFI_DEBUG
- bool "Enable full debugging output in iwlwifi drivers"
- depends on IWLWIFI
- default y
+ default m
---help---
- This option will enable debug tracing output for the iwlwifi
- drivers.
+ Select to build the driver supporting the:
- This will result in the kernel module being ~100k larger. You can
- control which debug output is sent to the kernel log by setting the
- value in
+ Intel Wireless WiFi Link 4965AGN
- /sys/bus/pci/drivers/${DRIVER}/debug_level
+ This driver uses the kernel's mac80211 subsystem.
- This entry will only exist if this option is enabled.
+ See <file:Documentation/networking/README.iwlwifi> for
+ information on the capabilities currently enabled in this
+ driver and for tips for debugging any issues or problems.
- To set a value, simply echo an 8-byte hex value to the same file:
+ In order to use this driver, you will need a microcode (uCode)
+ image for it. You can obtain the microcode from:
- % echo 0x43fff > /sys/bus/pci/drivers/${DRIVER}/debug_level
+ <http://intellinuxwireless.org/>.
- You can find the list of debug mask values in:
- drivers/net/wireless/mac80211/iwlwifi/iwl-debug.h
+ See the above referenced README.iwlwifi for information on where
+ to install the microcode images.
- If this is your first time using this driver, you should say Y here
- as the debug information can assist others in helping you resolve
- any problems you may encounter.
+ If you want to compile the driver as a module ( = code which can be
+ inserted in and remvoed from the running kernel whenever you want),
+ say M here and read <file:Documentation/kbuild/modules.txt>. The
+ module will be called iwl4965.ko.
-config IWLWIFI_SENSITIVITY
- bool "Enable Sensitivity Calibration in iwlwifi drivers"
- depends on IWLWIFI
+config IWL4965_QOS
+ bool "Enable Wireless QoS in iwl4965 driver"
+ depends on IWL4965
default y
---help---
- This option will enable sensitivity calibration for the iwlwifi
- drivers.
+ This option will enable wireless quality of service (QoS) for the
+ iw4965 driver.
-config IWLWIFI_SPECTRUM_MEASUREMENT
- bool "Enable Spectrum Measurement in iwlwifi drivers"
- depends on IWLWIFI
+config IWL4965_SPECTRUM_MEASUREMENT
+ bool "Enable Spectrum Measurement in iw4965 driver"
+ depends on IWL4965
default y
---help---
- This option will enable spectrum measurement for the iwlwifi drivers.
+ This option will enable spectrum measurement for the iwl4965 driver.
-config IWLWIFI_QOS
- bool "Enable Wireless QoS in iwlwifi drivers"
- depends on IWLWIFI
+config IWL4965_SENSITIVITY
+ bool "Enable Sensitivity Calibration in iwl4965 driver"
+ depends on IWL4965
default y
---help---
- This option will enable wireless quality of service (QoS) for the
- iwlwifi drivers.
+ This option will enable sensitivity calibration for the iwl4965
+ driver.
-config IWLWIFI_HT
- bool "Enable 802.11n HT features in iwlwifi drivers"
+config IWL4965_HT
+ bool "Enable 802.11n HT features in iwl4965 driver"
depends on EXPERIMENTAL
- depends on IWLWIFI && MAC80211_HT
+ depends on IWL4965 && MAC80211_HT
default n
---help---
This option enables IEEE 802.11n High Throughput features
- for the iwlwifi drivers.
+ for the iwl4965 driver.
-config IWL4965
- tristate "Intel Wireless WiFi 4965AGN"
- depends on m && IWLWIFI && EXPERIMENTAL
- default m
+config IWL4965_DEBUG
+ bool "Enable full debugging output in iwl4965 driver"
+ depends on IWL4965
+ default y
---help---
- Select to build the driver supporting the:
+ This option will enable debug tracing output for the iwl4965
+ driver.
- Intel Wireless WiFi Link 4965AGN
+ This will result in the kernel module being ~100k larger. You can
+ control which debug output is sent to the kernel log by setting the
+ value in
- This driver uses the kernel's mac80211 subsystem.
+ /sys/bus/pci/drivers/${DRIVER}/debug_level
- See <file:Documentation/networking/README.iwlwifi> for
- information on the capabilities currently enabled in this
- driver and for tips for debugging any issues or problems.
+ This entry will only exist if this option is enabled.
- In order to use this driver, you will need a microcode (uCode)
- image for it. You can obtain the microcode from:
+ To set a value, simply echo an 8-byte hex value to the same file:
- <http://intellinuxwireless.org/>.
+ % echo 0x43fff > /sys/bus/pci/drivers/${DRIVER}/debug_level
- See the above referenced README.iwlwifi for information on where
- to install the microcode images.
+ You can find the list of debug mask values in:
+ drivers/net/wireless/iwlwifi/iwl-4965-debug.h
- If you want to compile the driver as a module ( = code which can be
- inserted in and remvoed from the running kernel whenever you want),
- say M here and read <file:Documentation/kbuild/modules.txt>. The
- module will be called iwl4965.ko.
+ If this is your first time using this driver, you should say Y here
+ as the debug information can assist others in helping you resolve
+ any problems you may encounter.
config IWL3945
tristate "Intel PRO/Wireless 3945ABG/BG Network Connection"
- depends on m && IWLWIFI && EXPERIMENTAL
+ depends on m && PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
+ select FW_LOADER
default m
---help---
Select to build the driver supporting the:
@@ -126,3 +114,46 @@ config IWL3945
inserted in and remvoed from the running kernel whenever you want),
say M here and read <file:Documentation/kbuild/modules.txt>. The
module will be called iwl3945.ko.
+
+config IWL3945_QOS
+ bool "Enable Wireless QoS in iwl3945 driver"
+ depends on IWL3945
+ default y
+ ---help---
+ This option will enable wireless quality of service (QoS) for the
+ iwl3945 driver.
+
+config IWL3945_SPECTRUM_MEASUREMENT
+ bool "Enable Spectrum Measurement in iwl3945 drivers"
+ depends on IWL3945
+ default y
+ ---help---
+ This option will enable spectrum measurement for the iwl3945 driver.
+
+config IWL3945_DEBUG
+ bool "Enable full debugging output in iwl3945 driver"
+ depends on IWL3945
+ default y
+ ---help---
+ This option will enable debug tracing output for the iwl3945
+ driver.
+
+ This will result in the kernel module being ~100k larger. You can
+ control which debug output is sent to the kernel log by setting the
+ value in
+
+ /sys/bus/pci/drivers/${DRIVER}/debug_level
+
+ This entry will only exist if this option is enabled.
+
+ To set a value, simply echo an 8-byte hex value to the same file:
+
+ % echo 0x43fff > /sys/bus/pci/drivers/${DRIVER}/debug_level
+
+ You can find the list of debug mask values in:
+ drivers/net/wireless/iwlwifi/iwl-3945-debug.h
+
+ If this is your first time using this driver, you should say Y here
+ as the debug information can assist others in helping you resolve
+ any problems you may encounter.
+