aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/platform/x86/asus-laptop.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/platform/x86/asus-laptop.c')
-rw-r--r--drivers/platform/x86/asus-laptop.c1266
1 files changed, 1266 insertions, 0 deletions
diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c
new file mode 100644
index 0000000..8fb8b35
--- /dev/null
+++ b/drivers/platform/x86/asus-laptop.c
@@ -0,0 +1,1266 @@
+/*
+ * asus-laptop.c - Asus Laptop Support
+ *
+ *
+ * Copyright (C) 2002-2005 Julien Lerouge, 2003-2006 Karol Kozimor
+ * Copyright (C) 2006-2007 Corentin Chary
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *
+ * The development page for this driver is located at
+ * http://sourceforge.net/projects/acpi4asus/
+ *
+ * Credits:
+ * Pontus Fuchs - Helper functions, cleanup
+ * Johann Wiesner - Small compile fixes
+ * John Belmonte - ACPI code for Toshiba laptop was a good starting point.
+ * Eric Burghard - LED display support for W1N
+ * Josh Green - Light Sens support
+ * Thomas Tuttle - His first patch for led support was very helpfull
+ * Sam Lin - GPS support
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/err.h>
+#include <linux/proc_fs.h>
+#include <linux/backlight.h>
+#include <linux/fb.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+#include <acpi/acpi_drivers.h>
+#include <acpi/acpi_bus.h>
+#include <asm/uaccess.h>
+
+#define ASUS_LAPTOP_VERSION "0.42"
+
+#define ASUS_HOTK_NAME "Asus Laptop Support"
+#define ASUS_HOTK_CLASS "hotkey"
+#define ASUS_HOTK_DEVICE_NAME "Hotkey"
+#define ASUS_HOTK_FILE "asus-laptop"
+#define ASUS_HOTK_PREFIX "\\_SB.ATKD."
+
+/*
+ * Some events we use, same for all Asus
+ */
+#define ATKD_BR_UP 0x10
+#define ATKD_BR_DOWN 0x20
+#define ATKD_LCD_ON 0x33
+#define ATKD_LCD_OFF 0x34
+
+/*
+ * Known bits returned by \_SB.ATKD.HWRS
+ */
+#define WL_HWRS 0x80
+#define BT_HWRS 0x100
+
+/*
+ * Flags for hotk status
+ * WL_ON and BT_ON are also used for wireless_status()
+ */
+#define WL_ON 0x01 //internal Wifi
+#define BT_ON 0x02 //internal Bluetooth
+#define MLED_ON 0x04 //mail LED
+#define TLED_ON 0x08 //touchpad LED
+#define RLED_ON 0x10 //Record LED
+#define PLED_ON 0x20 //Phone LED
+#define GLED_ON 0x40 //Gaming LED
+#define LCD_ON 0x80 //LCD backlight
+#define GPS_ON 0x100 //GPS
+
+#define ASUS_LOG ASUS_HOTK_FILE ": "
+#define ASUS_ERR KERN_ERR ASUS_LOG
+#define ASUS_WARNING KERN_WARNING ASUS_LOG
+#define ASUS_NOTICE KERN_NOTICE ASUS_LOG
+#define ASUS_INFO KERN_INFO ASUS_LOG
+#define ASUS_DEBUG KERN_DEBUG ASUS_LOG
+
+MODULE_AUTHOR("Julien Lerouge, Karol Kozimor, Corentin Chary");
+MODULE_DESCRIPTION(ASUS_HOTK_NAME);
+MODULE_LICENSE("GPL");
+
+/* WAPF defines the behavior of the Fn+Fx wlan key
+ * The significance of values is yet to be found, but
+ * most of the time:
+ * 0x0 will do nothing
+ * 0x1 will allow to control the device with Fn+Fx key.
+ * 0x4 will send an ACPI event (0x88) while pressing the Fn+Fx key
+ * 0x5 like 0x1 or 0x4
+ * So, if something doesn't work as you want, just try other values =)
+ */
+static uint wapf = 1;
+module_param(wapf, uint, 0644);
+MODULE_PARM_DESC(wapf, "WAPF value");
+
+#define ASUS_HANDLE(object, paths...) \
+ static acpi_handle object##_handle = NULL; \
+ static char *object##_paths[] = { paths }
+
+/* LED */
+ASUS_HANDLE(mled_set, ASUS_HOTK_PREFIX "MLED");
+ASUS_HANDLE(tled_set, ASUS_HOTK_PREFIX "TLED");
+ASUS_HANDLE(rled_set, ASUS_HOTK_PREFIX "RLED"); /* W1JC */
+ASUS_HANDLE(pled_set, ASUS_HOTK_PREFIX "PLED"); /* A7J */
+ASUS_HANDLE(gled_set, ASUS_HOTK_PREFIX "GLED"); /* G1, G2 (probably) */
+
+/* LEDD */
+ASUS_HANDLE(ledd_set, ASUS_HOTK_PREFIX "SLCM");
+
+/* Bluetooth and WLAN
+ * WLED and BLED are not handled like other XLED, because in some dsdt
+ * they also control the WLAN/Bluetooth device.
+ */
+ASUS_HANDLE(wl_switch, ASUS_HOTK_PREFIX "WLED");
+ASUS_HANDLE(bt_switch, ASUS_HOTK_PREFIX "BLED");
+ASUS_HANDLE(wireless_status, ASUS_HOTK_PREFIX "RSTS"); /* All new models */
+
+/* Brightness */
+ASUS_HANDLE(brightness_set, ASUS_HOTK_PREFIX "SPLV");
+ASUS_HANDLE(brightness_get, ASUS_HOTK_PREFIX "GPLV");
+
+/* Backlight */
+ASUS_HANDLE(lcd_switch, "\\_SB.PCI0.SBRG.EC0._Q10", /* All new models */
+ "\\_SB.PCI0.ISA.EC0._Q10", /* A1x */
+ "\\_SB.PCI0.PX40.ECD0._Q10", /* L3C */
+ "\\_SB.PCI0.PX40.EC0.Q10", /* M1A */
+ "\\_SB.PCI0.LPCB.EC0._Q10", /* P30 */
+ "\\_SB.PCI0.LPCB.EC0._Q0E", /* P30/P35 */
+ "\\_SB.PCI0.PX40.Q10", /* S1x */
+ "\\Q10"); /* A2x, L2D, L3D, M2E */
+
+/* Display */
+ASUS_HANDLE(display_set, ASUS_HOTK_PREFIX "SDSP");
+ASUS_HANDLE(display_get, "\\_SB.PCI0.P0P1.VGA.GETD", /* A6B, A6K A6R A7D F3JM L4R M6R A3G
+ M6A M6V VX-1 V6J V6V W3Z */
+ "\\_SB.PCI0.P0P2.VGA.GETD", /* A3E A4K, A4D A4L A6J A7J A8J Z71V M9V
+ S5A M5A z33A W1Jc W2V G1 */
+ "\\_SB.PCI0.P0P3.VGA.GETD", /* A6V A6Q */
+ "\\_SB.PCI0.P0PA.VGA.GETD", /* A6T, A6M */
+ "\\_SB.PCI0.PCI1.VGAC.NMAP", /* L3C */
+ "\\_SB.PCI0.VGA.GETD", /* Z96F */
+ "\\ACTD", /* A2D */
+ "\\ADVG", /* A4G Z71A W1N W5A W5F M2N M3N M5N M6N S1N S5N */
+ "\\DNXT", /* P30 */
+ "\\INFB", /* A2H D1 L2D L3D L3H L2E L5D L5C M1A M2E L4L W3V */
+ "\\SSTE"); /* A3F A6F A3N A3L M6N W3N W6A */
+
+ASUS_HANDLE(ls_switch, ASUS_HOTK_PREFIX "ALSC"); /* Z71A Z71V */
+ASUS_HANDLE(ls_level, ASUS_HOTK_PREFIX "ALSL"); /* Z71A Z71V */
+
+/* GPS */
+/* R2H use different handle for GPS on/off */
+ASUS_HANDLE(gps_on, ASUS_HOTK_PREFIX "SDON"); /* R2H */
+ASUS_HANDLE(gps_off, ASUS_HOTK_PREFIX "SDOF"); /* R2H */
+ASUS_HANDLE(gps_status, ASUS_HOTK_PREFIX "GPST");
+
+/*
+ * This is the main structure, we can use it to store anything interesting
+ * about the hotk device
+ */
+struct asus_hotk {
+ char *name; //laptop name
+ struct acpi_device *device; //the device we are in
+ acpi_handle handle; //the handle of the hotk device
+ char status; //status of the hotk, for LEDs, ...
+ u32 ledd_status; //status of the LED display
+ u8 light_level; //light sensor level
+ u8 light_switch; //light sensor switch value
+ u16 event_count[128]; //count for each event TODO make this better
+};
+
+/*
+ * This header is made available to allow proper configuration given model,
+ * revision number , ... this info cannot go in struct asus_hotk because it is
+ * available before the hotk
+ */
+static struct acpi_table_header *asus_info;
+
+/* The actual device the driver binds to */
+static struct asus_hotk *hotk;
+
+/*
+ * The hotkey driver declaration
+ */
+static const struct acpi_device_id asus_device_ids[] = {
+ {"ATK0100", 0},
+ {"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, asus_device_ids);
+
+static int asus_hotk_add(struct acpi_device *device);
+static int asus_hotk_remove(struct acpi_device *device, int type);
+static struct acpi_driver asus_hotk_driver = {
+ .name = ASUS_HOTK_NAME,
+ .class = ASUS_HOTK_CLASS,
+ .ids = asus_device_ids,
+ .ops = {
+ .add = asus_hotk_add,
+ .remove = asus_hotk_remove,
+ },
+};
+
+/* The backlight device /sys/class/backlight */
+static struct backlight_device *asus_backlight_device;
+
+/*
+ * The backlight class declaration
+ */
+static int read_brightness(struct backlight_device *bd);
+static int update_bl_status(struct backlight_device *bd);
+static struct backlight_ops asusbl_ops = {
+ .get_brightness = read_brightness,
+ .update_status = update_bl_status,
+};
+
+/* These functions actually update the LED's, and are called from a
+ * workqueue. By doing this as separate work rather than when the LED
+ * subsystem asks, we avoid messing with the Asus ACPI stuff during a
+ * potentially bad time, such as a timer interrupt. */
+static struct workqueue_struct *led_workqueue;
+
+#define ASUS_LED(object, ledname) \
+ static void object##_led_set(struct led_classdev *led_cdev, \
+ enum led_brightness value); \
+ static void object##_led_update(struct work_struct *ignored); \
+ static int object##_led_wk; \
+ static DECLARE_WORK(object##_led_work, object##_led_update); \
+ static struct led_classdev object##_led = { \
+ .name = "asus::" ledname, \
+ .brightness_set = object##_led_set, \
+ }
+
+ASUS_LED(mled, "mail");
+ASUS_LED(tled, "touchpad");
+ASUS_LED(rled, "record");
+ASUS_LED(pled, "phone");
+ASUS_LED(gled, "gaming");
+
+/*
+ * This function evaluates an ACPI method, given an int as parameter, the
+ * method is searched within the scope of the handle, can be NULL. The output
+ * of the method is written is output, which can also be NULL
+ *
+ * returns 0 if write is successful, -1 else.
+ */
+static int write_acpi_int(acpi_handle handle, const char *method, int val,
+ struct acpi_buffer *output)
+{
+ struct acpi_object_list params; //list of input parameters (an int here)
+ union acpi_object in_obj; //the only param we use
+ acpi_status status;
+
+ if (!handle)
+ return 0;
+
+ params.count = 1;
+ params.pointer = &in_obj;
+ in_obj.type = ACPI_TYPE_INTEGER;
+ in_obj.integer.value = val;
+
+ status = acpi_evaluate_object(handle, (char *)method, &params, output);
+ if (status == AE_OK)
+ return 0;
+ else
+ return -1;
+}
+
+static int read_wireless_status(int mask)
+{
+ unsigned long long status;
+ acpi_status rv = AE_OK;
+
+ if (!wireless_status_handle)
+ return (hotk->status & mask) ? 1 : 0;
+
+ rv = acpi_evaluate_integer(wireless_status_handle, NULL, NULL, &status);
+ if (ACPI_FAILURE(rv))
+ printk(ASUS_WARNING "Error reading Wireless status\n");
+ else
+ return (status & mask) ? 1 : 0;
+
+ return (hotk->status & mask) ? 1 : 0;
+}
+
+static int read_gps_status(void)
+{
+ unsigned long long status;
+ acpi_status rv = AE_OK;
+
+ rv = acpi_evaluate_integer(gps_status_handle, NULL, NULL, &status);
+ if (ACPI_FAILURE(rv))
+ printk(ASUS_WARNING "Error reading GPS status\n");
+ else
+ return status ? 1 : 0;
+
+ return (hotk->status & GPS_ON) ? 1 : 0;
+}
+
+/* Generic LED functions */
+static int read_status(int mask)
+{
+ /* There is a special method for both wireless devices */
+ if (mask == BT_ON || mask == WL_ON)
+ return read_wireless_status(mask);
+ else if (mask == GPS_ON)
+ return read_gps_status();
+
+ return (hotk->status & mask) ? 1 : 0;
+}
+
+static void write_status(acpi_handle handle, int out, int mask)
+{
+ hotk->status = (out) ? (hotk->status | mask) : (hotk->status & ~mask);
+
+ switch (mask) {
+ case MLED_ON:
+ out = !(out & 0x1);
+ break;
+ case GLED_ON:
+ out = (out & 0x1) + 1;
+ break;
+ case GPS_ON:
+ handle = (out) ? gps_on_handle : gps_off_handle;
+ out = 0x02;
+ break;
+ default:
+ out &= 0x1;
+ break;
+ }
+
+ if (write_acpi_int(handle, NULL, out, NULL))
+ printk(ASUS_WARNING " write failed %x\n", mask);
+}
+
+/* /sys/class/led handlers */
+#define ASUS_LED_HANDLER(object, mask) \
+ static void object##_led_set(struct led_classdev *led_cdev, \
+ enum led_brightness value) \
+ { \
+ object##_led_wk = (value > 0) ? 1 : 0; \
+ queue_work(led_workqueue, &object##_led_work); \
+ } \
+ static void object##_led_update(struct work_struct *ignored) \
+ { \
+ int value = object##_led_wk; \
+ write_status(object##_set_handle, value, (mask)); \
+ }
+
+ASUS_LED_HANDLER(mled, MLED_ON);
+ASUS_LED_HANDLER(pled, PLED_ON);
+ASUS_LED_HANDLER(rled, RLED_ON);
+ASUS_LED_HANDLER(tled, TLED_ON);
+ASUS_LED_HANDLER(gled, GLED_ON);
+
+static int get_lcd_state(void)
+{
+ return read_status(LCD_ON);
+}
+
+static int set_lcd_state(int value)
+{
+ int lcd = 0;
+ acpi_status status = 0;
+
+ lcd = value ? 1 : 0;
+
+ if (lcd == get_lcd_state())
+ return 0;
+
+ if (lcd_switch_handle) {
+ status = acpi_evaluate_object(lcd_switch_handle,
+ NULL, NULL, NULL);
+
+ if (ACPI_FAILURE(status))
+ printk(ASUS_WARNING "Error switching LCD\n");
+ }
+
+ write_status(NULL, lcd, LCD_ON);
+ return 0;
+}
+
+static void lcd_blank(int blank)
+{
+ struct backlight_device *bd = asus_backlight_device;
+
+ if (bd) {
+ bd->props.power = blank;
+ backlight_update_status(bd);
+ }
+}
+
+static int read_brightness(struct backlight_device *bd)
+{
+ unsigned long long value;
+ acpi_status rv = AE_OK;
+
+ rv = acpi_evaluate_integer(brightness_get_handle, NULL, NULL, &value);
+ if (ACPI_FAILURE(rv))
+ printk(ASUS_WARNING "Error reading brightness\n");
+
+ return value;
+}
+
+static int set_brightness(struct backlight_device *bd, int value)
+{
+ int ret = 0;
+
+ value = (0 < value) ? ((15 < value) ? 15 : value) : 0;
+ /* 0 <= value <= 15 */
+
+ if (write_acpi_int(brightness_set_handle, NULL, value, NULL)) {
+ printk(ASUS_WARNING "Error changing brightness\n");
+ ret = -EIO;
+ }
+
+ return ret;
+}
+
+static int update_bl_status(struct backlight_device *bd)
+{
+ int rv;
+ int value = bd->props.brightness;
+
+ rv = set_brightness(bd, value);
+ if (rv)
+ return rv;
+
+ value = (bd->props.power == FB_BLANK_UNBLANK) ? 1 : 0;
+ return set_lcd_state(value);
+}
+
+/*
+ * Platform device handlers
+ */
+
+/*
+ * We write our info in page, we begin at offset off and cannot write more
+ * than count bytes. We set eof to 1 if we handle those 2 values. We return the
+ * number of bytes written in page
+ */
+static ssize_t show_infos(struct device *dev,
+ struct device_attribute *attr, char *page)
+{
+ int len = 0;
+ unsigned long long temp;
+ char buf[16]; //enough for all info
+ acpi_status rv = AE_OK;
+
+ /*
+ * We use the easy way, we don't care of off and count, so we don't set eof
+ * to 1
+ */
+
+ len += sprintf(page, ASUS_HOTK_NAME " " ASUS_LAPTOP_VERSION "\n");
+ len += sprintf(page + len, "Model reference : %s\n", hotk->name);
+ /*
+ * The SFUN method probably allows the original driver to get the list
+ * of features supported by a given model. For now, 0x0100 or 0x0800
+ * bit signifies that the laptop is equipped with a Wi-Fi MiniPCI card.
+ * The significance of others is yet to be found.
+ */
+ rv = acpi_evaluate_integer(hotk->handle, "SFUN", NULL, &temp);
+ if (!ACPI_FAILURE(rv))
+ len += sprintf(page + len, "SFUN value : 0x%04x\n",
+ (uint) temp);
+ /*
+ * Another value for userspace: the ASYM method returns 0x02 for
+ * battery low and 0x04 for battery critical, its readings tend to be
+ * more accurate than those provided by _BST.
+ * Note: since not all the laptops provide this method, errors are
+ * silently ignored.
+ */
+ rv = acpi_evaluate_integer(hotk->handle, "ASYM", NULL, &temp);
+ if (!ACPI_FAILURE(rv))
+ len += sprintf(page + len, "ASYM value : 0x%04x\n",
+ (uint) temp);
+ if (asus_info) {
+ snprintf(buf, 16, "%d", asus_info->length);
+ len += sprintf(page + len, "DSDT length : %s\n", buf);
+ snprintf(buf, 16, "%d", asus_info->checksum);
+ len += sprintf(page + len, "DSDT checksum : %s\n", buf);
+ snprintf(buf, 16, "%d", asus_info->revision);
+ len += sprintf(page + len, "DSDT revision : %s\n", buf);
+ snprintf(buf, 7, "%s", asus_info->oem_id);
+ len += sprintf(page + len, "OEM id : %s\n", buf);
+ snprintf(buf, 9, "%s", asus_info->oem_table_id);
+ len += sprintf(page + len, "OEM table id : %s\n", buf);
+ snprintf(buf, 16, "%x", asus_info->oem_revision);
+ len += sprintf(page + len, "OEM revision : 0x%s\n", buf);
+ snprintf(buf, 5, "%s", asus_info->asl_compiler_id);
+ len += sprintf(page + len, "ASL comp vendor id : %s\n", buf);
+ snprintf(buf, 16, "%x", asus_info->asl_compiler_revision);
+ len += sprintf(page + len, "ASL comp revision : 0x%s\n", buf);
+ }
+
+ return len;
+}
+
+static int parse_arg(const char *buf, unsigned long count, int *val)
+{
+ if (!count)
+ return 0;
+ if (count > 31)
+ return -EINVAL;
+ if (sscanf(buf, "%i", val) != 1)
+ return -EINVAL;
+ return count;
+}
+
+static ssize_t store_status(const char *buf, size_t count,
+ acpi_handle handle, int mask)
+{
+ int rv, value;
+ int out = 0;
+
+ rv = parse_arg(buf, count, &value);
+ if (rv > 0)
+ out = value ? 1 : 0;
+
+ write_status(handle, out, mask);
+
+ return rv;
+}
+
+/*
+ * LEDD display
+ */
+static ssize_t show_ledd(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "0x%08x\n", hotk->ledd_status);
+}
+
+static ssize_t store_ledd(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int rv, value;
+
+ rv = parse_arg(buf, count, &value);
+ if (rv > 0) {
+ if (write_acpi_int(ledd_set_handle, NULL, value, NULL))
+ printk(ASUS_WARNING "LED display write failed\n");
+ else
+ hotk->ledd_status = (u32) value;
+ }
+ return rv;
+}
+
+/*
+ * WLAN
+ */
+static ssize_t show_wlan(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", read_status(WL_ON));
+}
+
+static ssize_t store_wlan(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return store_status(buf, count, wl_switch_handle, WL_ON);
+}
+
+/*
+ * Bluetooth
+ */
+static ssize_t show_bluetooth(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", read_status(BT_ON));
+}
+
+static ssize_t store_bluetooth(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ return store_status(buf, count, bt_switch_handle, BT_ON);
+}
+
+/*
+ * Display
+ */
+static void set_display(int value)
+{
+ /* no sanity check needed for now */
+ if (write_acpi_int(display_set_handle, NULL, value, NULL))
+ printk(ASUS_WARNING "Error setting display\n");
+ return;
+}
+
+static int read_display(void)
+{
+ unsigned long long value = 0;
+ acpi_status rv = AE_OK;
+
+ /* In most of the case, we know how to set the display, but sometime
+ we can't read it */
+ if (display_get_handle) {
+ rv = acpi_evaluate_integer(display_get_handle, NULL,
+ NULL, &value);
+ if (ACPI_FAILURE(rv))
+ printk(ASUS_WARNING "Error reading display status\n");
+ }
+
+ value &= 0x0F; /* needed for some models, shouldn't hurt others */
+
+ return value;
+}
+
+/*
+ * Now, *this* one could be more user-friendly, but so far, no-one has
+ * complained. The significance of bits is the same as in store_disp()
+ */
+static ssize_t show_disp(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", read_display());
+}
+
+/*
+ * Experimental support for display switching. As of now: 1 should activate
+ * the LCD output, 2 should do for CRT, 4 for TV-Out and 8 for DVI.
+ * Any combination (bitwise) of these will suffice. I never actually tested 4
+ * displays hooked up simultaneously, so be warned. See the acpi4asus README
+ * for more info.
+ */
+static ssize_t store_disp(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int rv, value;
+
+ rv = parse_arg(buf, count, &value);
+ if (rv > 0)
+ set_display(value);
+ return rv;
+}
+
+/*
+ * Light Sens
+ */
+static void set_light_sens_switch(int value)
+{
+ if (write_acpi_int(ls_switch_handle, NULL, value, NULL))
+ printk(ASUS_WARNING "Error setting light sensor switch\n");
+ hotk->light_switch = value;
+}
+
+static ssize_t show_lssw(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", hotk->light_switch);
+}
+
+static ssize_t store_lssw(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int rv, value;
+
+ rv = parse_arg(buf, count, &value);
+ if (rv > 0)
+ set_light_sens_switch(value ? 1 : 0);
+
+ return rv;
+}
+
+static void set_light_sens_level(int value)
+{
+ if (write_acpi_int(ls_level_handle, NULL, value, NULL))
+ printk(ASUS_WARNING "Error setting light sensor level\n");
+ hotk->light_level = value;
+}
+
+static ssize_t show_lslvl(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", hotk->light_level);
+}
+
+static ssize_t store_lslvl(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int rv, value;
+
+ rv = parse_arg(buf, count, &value);
+ if (rv > 0) {
+ value = (0 < value) ? ((15 < value) ? 15 : value) : 0;
+ /* 0 <= value <= 15 */
+ set_light_sens_level(value);
+ }
+
+ return rv;
+}
+
+/*
+ * GPS
+ */
+static ssize_t show_gps(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", read_status(GPS_ON));
+}
+
+static ssize_t store_gps(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return store_status(buf, count, NULL, GPS_ON);
+}
+
+static void asus_hotk_notify(acpi_handle handle, u32 event, void *data)
+{
+ /* TODO Find a better way to handle events count. */
+ if (!hotk)
+ return;
+
+ /*
+ * We need to tell the backlight device when the backlight power is
+ * switched
+ */
+ if (event == ATKD_LCD_ON) {
+ write_status(NULL, 1, LCD_ON);
+ lcd_blank(FB_BLANK_UNBLANK);
+ } else if (event == ATKD_LCD_OFF) {
+ write_status(NULL, 0, LCD_ON);
+ lcd_blank(FB_BLANK_POWERDOWN);
+ }
+
+ acpi_bus_generate_proc_event(hotk->device, event,
+ hotk->event_count[event % 128]++);
+
+ return;
+}
+
+#define ASUS_CREATE_DEVICE_ATTR(_name) \
+ struct device_attribute dev_attr_##_name = { \
+ .attr = { \
+ .name = __stringify(_name), \
+ .mode = 0 }, \
+ .show = NULL, \
+ .store = NULL, \
+ }
+
+#define ASUS_SET_DEVICE_ATTR(_name, _mode, _show, _store) \
+ do { \
+ dev_attr_##_name.attr.mode = _mode; \
+ dev_attr_##_name.show = _show; \
+ dev_attr_##_name.store = _store; \
+ } while(0)
+
+static ASUS_CREATE_DEVICE_ATTR(infos);
+static ASUS_CREATE_DEVICE_ATTR(wlan);
+static ASUS_CREATE_DEVICE_ATTR(bluetooth);
+static ASUS_CREATE_DEVICE_ATTR(display);
+static ASUS_CREATE_DEVICE_ATTR(ledd);
+static ASUS_CREATE_DEVICE_ATTR(ls_switch);
+static ASUS_CREATE_DEVICE_ATTR(ls_level);
+static ASUS_CREATE_DEVICE_ATTR(gps);
+
+static struct attribute *asuspf_attributes[] = {
+ &dev_attr_infos.attr,
+ &dev_attr_wlan.attr,
+ &dev_attr_bluetooth.attr,
+ &dev_attr_display.attr,
+ &dev_attr_ledd.attr,
+ &dev_attr_ls_switch.attr,
+ &dev_attr_ls_level.attr,
+ &dev_attr_gps.attr,
+ NULL
+};
+
+static struct attribute_group asuspf_attribute_group = {
+ .attrs = asuspf_attributes
+};
+
+static struct platform_driver asuspf_driver = {
+ .driver = {
+ .name = ASUS_HOTK_FILE,
+ .owner = THIS_MODULE,
+ }
+};
+
+static struct platform_device *asuspf_device;
+
+static void asus_hotk_add_fs(void)
+{
+ ASUS_SET_DEVICE_ATTR(infos, 0444, show_infos, NULL);
+
+ if (wl_switch_handle)
+ ASUS_SET_DEVICE_ATTR(wlan, 0644, show_wlan, store_wlan);
+
+ if (bt_switch_handle)
+ ASUS_SET_DEVICE_ATTR(bluetooth, 0644,
+ show_bluetooth, store_bluetooth);
+
+ if (display_set_handle && display_get_handle)
+ ASUS_SET_DEVICE_ATTR(display, 0644, show_disp, store_disp);
+ else if (display_set_handle)
+ ASUS_SET_DEVICE_ATTR(display, 0200, NULL, store_disp);
+
+ if (ledd_set_handle)
+ ASUS_SET_DEVICE_ATTR(ledd, 0644, show_ledd, store_ledd);
+
+ if (ls_switch_handle && ls_level_handle) {
+ ASUS_SET_DEVICE_ATTR(ls_level, 0644, show_lslvl, store_lslvl);
+ ASUS_SET_DEVICE_ATTR(ls_switch, 0644, show_lssw, store_lssw);
+ }
+
+ if (gps_status_handle && gps_on_handle && gps_off_handle)
+ ASUS_SET_DEVICE_ATTR(gps, 0644, show_gps, store_gps);
+}
+
+static int asus_handle_init(char *name, acpi_handle * handle,
+ char **paths, int num_paths)
+{
+ int i;
+ acpi_status status;
+
+ for (i = 0; i < num_paths; i++) {
+ status = acpi_get_handle(NULL, paths[i], handle);
+ if (ACPI_SUCCESS(status))
+ return 0;
+ }
+
+ *handle = NULL;
+ return -ENODEV;
+}
+
+#define ASUS_HANDLE_INIT(object) \
+ asus_handle_init(#object, &object##_handle, object##_paths, \
+ ARRAY_SIZE(object##_paths))
+
+/*
+ * This function is used to initialize the hotk with right values. In this
+ * method, we can make all the detection we want, and modify the hotk struct
+ */
+static int asus_hotk_get_info(void)
+{
+ struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+ union acpi_object *model = NULL;
+ unsigned long long bsts_result, hwrs_result;
+ char *string = NULL;
+ acpi_status status;
+
+ /*
+ * Get DSDT headers early enough to allow for differentiating between
+ * models, but late enough to allow acpi_bus_register_driver() to fail
+ * before doing anything ACPI-specific. Should we encounter a machine,
+ * which needs special handling (i.e. its hotkey device has a different
+ * HID), this bit will be moved. A global variable asus_info contains
+ * the DSDT header.
+ */
+ status = acpi_get_table(ACPI_SIG_DSDT, 1, &asus_info);
+ if (ACPI_FAILURE(status))
+ printk(ASUS_WARNING "Couldn't get the DSDT table header\n");
+
+ /* We have to write 0 on init this far for all ASUS models */
+ if (write_acpi_int(hotk->handle, "INIT", 0, &buffer)) {
+ printk(ASUS_ERR "Hotkey initialization failed\n");
+ return -ENODEV;
+ }
+
+ /* This needs to be called for some laptops to init properly */
+ status =
+ acpi_evaluate_integer(hotk->handle, "BSTS", NULL, &bsts_result);
+ if (ACPI_FAILURE(status))
+ printk(ASUS_WARNING "Error calling BSTS\n");
+ else if (bsts_result)
+ printk(ASUS_NOTICE "BSTS called, 0x%02x returned\n",
+ (uint) bsts_result);
+
+ /* This too ... */
+ write_acpi_int(hotk->handle, "CWAP", wapf, NULL);
+
+ /*
+ * Try to match the object returned by INIT to the specific model.
+ * Handle every possible object (or the lack of thereof) the DSDT
+ * writers might throw at us. When in trouble, we pass NULL to
+ * asus_model_match() and try something completely different.
+ */
+ if (buffer.pointer) {
+ model = buffer.pointer;
+ switch (model->type) {
+ case ACPI_TYPE_STRING:
+ string = model->string.pointer;
+ break;
+ case ACPI_TYPE_BUFFER:
+ string = model->buffer.pointer;
+ break;
+ default:
+ string = "";
+ break;
+ }
+ }
+ hotk->name = kstrdup(string, GFP_KERNEL);
+ if (!hotk->name)
+ return -ENOMEM;
+
+ if (*string)
+ printk(ASUS_NOTICE " %s model detected\n", string);
+
+ ASUS_HANDLE_INIT(mled_set);
+ ASUS_HANDLE_INIT(tled_set);
+ ASUS_HANDLE_INIT(rled_set);
+ ASUS_HANDLE_INIT(pled_set);
+ ASUS_HANDLE_INIT(gled_set);
+
+ ASUS_HANDLE_INIT(ledd_set);
+
+ /*
+ * The HWRS method return informations about the hardware.
+ * 0x80 bit is for WLAN, 0x100 for Bluetooth.
+ * The significance of others is yet to be found.
+ * If we don't find the method, we assume the device are present.
+ */
+ status =
+ acpi_evaluate_integer(hotk->handle, "HRWS", NULL, &hwrs_result);
+ if (ACPI_FAILURE(status))
+ hwrs_result = WL_HWRS | BT_HWRS;
+
+ if (hwrs_result & WL_HWRS)
+ ASUS_HANDLE_INIT(wl_switch);
+ if (hwrs_result & BT_HWRS)
+ ASUS_HANDLE_INIT(bt_switch);
+
+ ASUS_HANDLE_INIT(wireless_status);
+
+ ASUS_HANDLE_INIT(brightness_set);
+ ASUS_HANDLE_INIT(brightness_get);
+
+ ASUS_HANDLE_INIT(lcd_switch);
+
+ ASUS_HANDLE_INIT(display_set);
+ ASUS_HANDLE_INIT(display_get);
+
+ /* There is a lot of models with "ALSL", but a few get
+ a real light sens, so we need to check it. */
+ if (!ASUS_HANDLE_INIT(ls_switch))
+ ASUS_HANDLE_INIT(ls_level);
+
+ ASUS_HANDLE_INIT(gps_on);
+ ASUS_HANDLE_INIT(gps_off);
+ ASUS_HANDLE_INIT(gps_status);
+
+ kfree(model);
+
+ return AE_OK;
+}
+
+static int asus_hotk_check(void)
+{
+ int result = 0;
+
+ result = acpi_bus_get_status(hotk->device);
+ if (result)
+ return result;
+
+ if (hotk->device->status.present) {
+ result = asus_hotk_get_info();
+ } else {
+ printk(ASUS_ERR "Hotkey device not present, aborting\n");
+ return -EINVAL;
+ }
+
+ return result;
+}
+
+static int asus_hotk_found;
+
+static int asus_hotk_add(struct acpi_device *device)
+{
+ acpi_status status = AE_OK;
+ int result;
+
+ if (!device)
+ return -EINVAL;
+
+ printk(ASUS_NOTICE "Asus Laptop Support version %s\n",
+ ASUS_LAPTOP_VERSION);
+
+ hotk = kzalloc(sizeof(struct asus_hotk), GFP_KERNEL);
+ if (!hotk)
+ return -ENOMEM;
+
+ hotk->handle = device->handle;
+ strcpy(acpi_device_name(device), ASUS_HOTK_DEVICE_NAME);
+ strcpy(acpi_device_class(device), ASUS_HOTK_CLASS);
+ device->driver_data = hotk;
+ hotk->device = device;
+
+ result = asus_hotk_check();
+ if (result)
+ goto end;
+
+ asus_hotk_add_fs();
+
+ /*
+ * We install the handler, it will receive the hotk in parameter, so, we
+ * could add other data to the hotk struct
+ */
+ status = acpi_install_notify_handler(hotk->handle, ACPI_ALL_NOTIFY,
+ asus_hotk_notify, hotk);
+ if (ACPI_FAILURE(status))
+ printk(ASUS_ERR "Error installing notify handler\n");
+
+ asus_hotk_found = 1;
+
+ /* WLED and BLED are on by default */
+ write_status(bt_switch_handle, 1, BT_ON);
+ write_status(wl_switch_handle, 1, WL_ON);
+
+ /* If the h/w switch is off, we need to check the real status */
+ write_status(NULL, read_status(BT_ON), BT_ON);
+ write_status(NULL, read_status(WL_ON), WL_ON);
+
+ /* LCD Backlight is on by default */
+ write_status(NULL, 1, LCD_ON);
+
+ /* LED display is off by default */
+ hotk->ledd_status = 0xFFF;
+
+ /* Set initial values of light sensor and level */
+ hotk->light_switch = 1; /* Default to light sensor disabled */
+ hotk->light_level = 0; /* level 5 for sensor sensitivity */
+
+ if (ls_switch_handle)
+ set_light_sens_switch(hotk->light_switch);
+
+ if (ls_level_handle)
+ set_light_sens_level(hotk->light_level);
+
+ /* GPS is on by default */
+ write_status(NULL, 1, GPS_ON);
+
+ end:
+ if (result) {
+ kfree(hotk->name);
+ kfree(hotk);
+ }
+
+ return result;
+}
+
+static int asus_hotk_remove(struct acpi_device *device, int type)
+{
+ acpi_status status = 0;
+
+ if (!device || !acpi_driver_data(device))
+ return -EINVAL;
+
+ status = acpi_remove_notify_handler(hotk->handle, ACPI_ALL_NOTIFY,
+ asus_hotk_notify);
+ if (ACPI_FAILURE(status))
+ printk(ASUS_ERR "Error removing notify handler\n");
+
+ kfree(hotk->name);
+ kfree(hotk);
+
+ return 0;
+}
+
+static void asus_backlight_exit(void)
+{
+ if (asus_backlight_device)
+ backlight_device_unregister(asus_backlight_device);
+}
+
+#define ASUS_LED_UNREGISTER(object) \
+ if (object##_led.dev) \
+ led_classdev_unregister(&object##_led)
+
+static void asus_led_exit(void)
+{
+ destroy_workqueue(led_workqueue);
+ ASUS_LED_UNREGISTER(mled);
+ ASUS_LED_UNREGISTER(tled);
+ ASUS_LED_UNREGISTER(pled);
+ ASUS_LED_UNREGISTER(rled);
+ ASUS_LED_UNREGISTER(gled);
+}
+
+static void __exit asus_laptop_exit(void)
+{
+ asus_backlight_exit();
+ asus_led_exit();
+
+ acpi_bus_unregister_driver(&asus_hotk_driver);
+ sysfs_remove_group(&asuspf_device->dev.kobj, &asuspf_attribute_group);
+ platform_device_unregister(asuspf_device);
+ platform_driver_unregister(&asuspf_driver);
+}
+
+static int asus_backlight_init(struct device *dev)
+{
+ struct backlight_device *bd;
+
+ if (brightness_set_handle && lcd_switch_handle) {
+ bd = backlight_device_register(ASUS_HOTK_FILE, dev,
+ NULL, &asusbl_ops);
+ if (IS_ERR(bd)) {
+ printk(ASUS_ERR
+ "Could not register asus backlight device\n");
+ asus_backlight_device = NULL;
+ return PTR_ERR(bd);
+ }
+
+ asus_backlight_device = bd;
+
+ bd->props.max_brightness = 15;
+ bd->props.brightness = read_brightness(NULL);
+ bd->props.power = FB_BLANK_UNBLANK;
+ backlight_update_status(bd);
+ }
+ return 0;
+}
+
+static int asus_led_register(acpi_handle handle,
+ struct led_classdev *ldev, struct device *dev)
+{
+ if (!handle)
+ return 0;
+
+ return led_classdev_register(dev, ldev);
+}
+
+#define ASUS_LED_REGISTER(object, device) \
+ asus_led_register(object##_set_handle, &object##_led, device)
+
+static int asus_led_init(struct device *dev)
+{
+ int rv;
+
+ rv = ASUS_LED_REGISTER(mled, dev);
+ if (rv)
+ goto out;
+
+ rv = ASUS_LED_REGISTER(tled, dev);
+ if (rv)
+ goto out1;
+
+ rv = ASUS_LED_REGISTER(rled, dev);
+ if (rv)
+ goto out2;
+
+ rv = ASUS_LED_REGISTER(pled, dev);
+ if (rv)
+ goto out3;
+
+ rv = ASUS_LED_REGISTER(gled, dev);
+ if (rv)
+ goto out4;
+
+ led_workqueue = create_singlethread_workqueue("led_workqueue");
+ if (!led_workqueue)
+ goto out5;
+
+ return 0;
+out5:
+ rv = -ENOMEM;
+ ASUS_LED_UNREGISTER(gled);
+out4:
+ ASUS_LED_UNREGISTER(pled);
+out3:
+ ASUS_LED_UNREGISTER(rled);
+out2:
+ ASUS_LED_UNREGISTER(tled);
+out1:
+ ASUS_LED_UNREGISTER(mled);
+out:
+ return rv;
+}
+
+static int __init asus_laptop_init(void)
+{
+ struct device *dev;
+ int result;
+
+ if (acpi_disabled)
+ return -ENODEV;
+
+ result = acpi_bus_register_driver(&asus_hotk_driver);
+ if (result < 0)
+ return result;
+
+ /*
+ * This is a bit of a kludge. We only want this module loaded
+ * for ASUS systems, but there's currently no way to probe the
+ * ACPI namespace for ASUS HIDs. So we just return failure if
+ * we didn't find one, which will cause the module to be
+ * unloaded.
+ */
+ if (!asus_hotk_found) {
+ acpi_bus_unregister_driver(&asus_hotk_driver);
+ return -ENODEV;
+ }
+
+ dev = acpi_get_physical_device(hotk->device->handle);
+
+ if (!acpi_video_backlight_support()) {
+ result = asus_backlight_init(dev);
+ if (result)
+ goto fail_backlight;
+ } else
+ printk(ASUS_INFO "Brightness ignored, must be controlled by "
+ "ACPI video driver\n");
+
+ result = asus_led_init(dev);
+ if (result)
+ goto fail_led;
+
+ /* Register platform stuff */
+ result = platform_driver_register(&asuspf_driver);
+ if (result)
+ goto fail_platform_driver;
+
+ asuspf_device = platform_device_alloc(ASUS_HOTK_FILE, -1);
+ if (!asuspf_device) {
+ result = -ENOMEM;
+ goto fail_platform_device1;
+ }
+
+ result = platform_device_add(asuspf_device);
+ if (result)
+ goto fail_platform_device2;
+
+ result = sysfs_create_group(&asuspf_device->dev.kobj,
+ &asuspf_attribute_group);
+ if (result)
+ goto fail_sysfs;
+
+ return 0;
+
+ fail_sysfs:
+ platform_device_del(asuspf_device);
+
+ fail_platform_device2:
+ platform_device_put(asuspf_device);
+
+ fail_platform_device1:
+ platform_driver_unregister(&asuspf_driver);
+
+ fail_platform_driver:
+ asus_led_exit();
+
+ fail_led:
+ asus_backlight_exit();
+
+ fail_backlight:
+
+ return result;
+}
+
+module_init(asus_laptop_init);
+module_exit(asus_laptop_exit);