aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi/cpqfcTSi2c.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/cpqfcTSi2c.c')
-rw-r--r--drivers/scsi/cpqfcTSi2c.c493
1 files changed, 0 insertions, 493 deletions
diff --git a/drivers/scsi/cpqfcTSi2c.c b/drivers/scsi/cpqfcTSi2c.c
deleted file mode 100644
index b38a6a9..0000000
--- a/drivers/scsi/cpqfcTSi2c.c
+++ /dev/null
@@ -1,493 +0,0 @@
-/* Copyright(c) 2000, Compaq Computer Corporation
- * Fibre Channel Host Bus Adapter
- * 64-bit, 66MHz PCI
- * Originally developed and tested on:
- * (front): [chip] Tachyon TS HPFC-5166A/1.2 L2C1090 ...
- * SP# P225CXCBFIEL6T, Rev XC
- * SP# 161290-001, Rev XD
- * (back): Board No. 010008-001 A/W Rev X5, FAB REV X5
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- * Written by Don Zimmerman
-*/
-// These functions control the NVRAM I2C hardware on
-// non-intelligent Fibre Host Adapters.
-// The primary purpose is to read the HBA's NVRAM to get adapter's
-// manufactured WWN to copy into Tachyon chip registers
-// Orignal source author unknown
-
-#include <linux/types.h>
-enum boolean { FALSE, TRUE } ;
-
-
-#ifndef UCHAR
-typedef __u8 UCHAR;
-#endif
-#ifndef BOOLEAN
-typedef __u8 BOOLEAN;
-#endif
-#ifndef USHORT
-typedef __u16 USHORT;
-#endif
-#ifndef ULONG
-typedef __u32 ULONG;
-#endif
-
-
-#include <linux/string.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <asm/io.h> // struct pt_regs for IRQ handler & Port I/O
-
-#include "cpqfcTSchip.h"
-
-static void tl_i2c_tx_byte( void* GPIOout, UCHAR data );
-/*static BOOLEAN tl_write_i2c_page_portion( void* GPIOin, void* GPIOout,
- USHORT startOffset, // e.g. 0x2f for WWN start
- USHORT count,
- UCHAR *buf );
-*/
-
-//
-// Tachlite GPIO2, GPIO3 (I2C) DEFINES
-// The NVRAM chip NM24C03 defines SCL (serial clock) and SDA (serial data)
-// GPIO2 drives SDA, and GPIO3 drives SCL
-//
-// Since Tachlite inverts the state of the GPIO 0-3 outputs, SET writes 0
-// and clear writes 1. The input lines (read in TL status) is NOT inverted
-// This really helps confuse the code and debugging.
-
-#define SET_DATA_HI 0x0
-#define SET_DATA_LO 0x8
-#define SET_CLOCK_HI 0x0
-#define SET_CLOCK_LO 0x4
-
-#define SENSE_DATA_HI 0x8
-#define SENSE_DATA_LO 0x0
-#define SENSE_CLOCK_HI 0x4
-#define SENSE_CLOCK_LO 0x0
-
-#define SLAVE_READ_ADDRESS 0xA1
-#define SLAVE_WRITE_ADDRESS 0xA0
-
-
-static void i2c_delay(ULONG mstime);
-static void tl_i2c_clock_pulse( UCHAR , void* GPIOout);
-static UCHAR tl_read_i2c_data( void* );
-
-
-//-----------------------------------------------------------------------------
-//
-// Name: I2C_RX_ACK
-//
-// This routine receives an acknowledge over the I2C bus.
-//
-//-----------------------------------------------------------------------------
-static unsigned short tl_i2c_rx_ack( void* GPIOin, void* GPIOout )
-{
- unsigned long value;
-
- // do clock pulse, let data line float high
- tl_i2c_clock_pulse( SET_DATA_HI, GPIOout );
-
- // slave must drive data low for acknowledge
- value = tl_read_i2c_data( GPIOin);
- if (value & SENSE_DATA_HI )
- return( FALSE );
-
- return( TRUE );
-}
-//-----------------------------------------------------------------------------
-//
-// Name: READ_I2C_REG
-//
-// This routine reads the I2C control register using the global
-// IO address stored in gpioreg.
-//
-//-----------------------------------------------------------------------------
-static UCHAR tl_read_i2c_data( void* gpioreg )
-{
- return( (UCHAR)(readl( gpioreg ) & 0x08L) ); // GPIO3
-}
-//-----------------------------------------------------------------------------
-//
-// Name: WRITE_I2C_REG
-//
-// This routine writes the I2C control register using the global
-// IO address stored in gpioreg.
-// In Tachlite, we don't want to modify other bits in TL Control reg.
-//
-//-----------------------------------------------------------------------------
-static void tl_write_i2c_reg( void* gpioregOUT, UCHAR value )
-{
- ULONG temp;
-
- // First read the register and clear out the old bits
- temp = readl( gpioregOUT ) & 0xfffffff3L;
-
- // Now or in the new data and send it back out
- writel( temp | value, gpioregOUT);
-}
-//-----------------------------------------------------------------------------
-//
-// Name: I2C_TX_START
-//
-// This routine transmits a start condition over the I2C bus.
-// 1. Set SCL (clock, GPIO2) HIGH, set SDA (data, GPIO3) HIGH,
-// wait 5us to stabilize.
-// 2. With SCL still HIGH, drive SDA low. The low transition marks
-// the start condition to NM24Cxx (the chip)
-// NOTE! In TL control reg., output 1 means chip sees LOW
-//
-//-----------------------------------------------------------------------------
-static unsigned short tl_i2c_tx_start( void* GPIOin, void* GPIOout )
-{
- unsigned short i;
- ULONG value;
-
- if ( !(tl_read_i2c_data(GPIOin) & SENSE_DATA_HI))
- {
- // start with clock high, let data float high
- tl_write_i2c_reg( GPIOout, SET_DATA_HI | SET_CLOCK_HI );
-
- // keep sending clock pulses if slave is driving data line
- for (i = 0; i < 10; i++)
- {
- tl_i2c_clock_pulse( SET_DATA_HI, GPIOout );
-
- if ( tl_read_i2c_data(GPIOin) & SENSE_DATA_HI )
- break;
- }
-
- // if he's still driving data low after 10 clocks, abort
- value = tl_read_i2c_data( GPIOin ); // read status
- if (!(value & 0x08) )
- return( FALSE );
- }
-
-
- // To START, bring data low while clock high
- tl_write_i2c_reg( GPIOout, SET_CLOCK_HI | SET_DATA_LO );
-
- i2c_delay(0);
-
- return( TRUE ); // TX start successful
-}
-//-----------------------------------------------------------------------------
-//
-// Name: I2C_TX_STOP
-//
-// This routine transmits a stop condition over the I2C bus.
-//
-//-----------------------------------------------------------------------------
-
-static unsigned short tl_i2c_tx_stop( void* GPIOin, void* GPIOout )
-{
- int i;
-
- for (i = 0; i < 10; i++)
- {
- // Send clock pulse, drive data line low
- tl_i2c_clock_pulse( SET_DATA_LO, GPIOout );
-
- // To STOP, bring data high while clock high
- tl_write_i2c_reg( GPIOout, SET_DATA_HI | SET_CLOCK_HI );
-
- // Give the data line time to float high
- i2c_delay(0);
-
- // If slave is driving data line low, there's a problem; retry
- if ( tl_read_i2c_data(GPIOin) & SENSE_DATA_HI )
- return( TRUE ); // TX STOP successful!
- }
-
- return( FALSE ); // error
-}
-//-----------------------------------------------------------------------------
-//
-// Name: I2C_TX_uchar
-//
-// This routine transmits a byte across the I2C bus.
-//
-//-----------------------------------------------------------------------------
-static void tl_i2c_tx_byte( void* GPIOout, UCHAR data )
-{
- UCHAR bit;
-
- for (bit = 0x80; bit; bit >>= 1)
- {
- if( data & bit )
- tl_i2c_clock_pulse( (UCHAR)SET_DATA_HI, GPIOout);
- else
- tl_i2c_clock_pulse( (UCHAR)SET_DATA_LO, GPIOout);
- }
-}
-//-----------------------------------------------------------------------------
-//
-// Name: I2C_RX_uchar
-//
-// This routine receives a byte across the I2C bus.
-//
-//-----------------------------------------------------------------------------
-static UCHAR tl_i2c_rx_byte( void* GPIOin, void* GPIOout )
-{
- UCHAR bit;
- UCHAR data = 0;
-
-
- for (bit = 0x80; bit; bit >>= 1) {
- // do clock pulse, let data line float high
- tl_i2c_clock_pulse( SET_DATA_HI, GPIOout );
-
- // read data line
- if ( tl_read_i2c_data( GPIOin) & 0x08 )
- data |= bit;
- }
-
- return (data);
-}
-//*****************************************************************************
-//*****************************************************************************
-// Function: read_i2c_nvram
-// Arguments: UCHAR count number of bytes to read
-// UCHAR *buf area to store the bytes read
-// Returns: 0 - failed
-// 1 - success
-//*****************************************************************************
-//*****************************************************************************
-unsigned long cpqfcTS_ReadNVRAM( void* GPIOin, void* GPIOout , USHORT count,
- UCHAR *buf )
-{
- unsigned short i;
-
- if( !( tl_i2c_tx_start(GPIOin, GPIOout) ))
- return FALSE;
-
- // Select the NVRAM for "dummy" write, to set the address
- tl_i2c_tx_byte( GPIOout , SLAVE_WRITE_ADDRESS );
- if ( !tl_i2c_rx_ack(GPIOin, GPIOout ) )
- return( FALSE );
-
- // Now send the address where we want to start reading
- tl_i2c_tx_byte( GPIOout , 0 );
- if ( !tl_i2c_rx_ack(GPIOin, GPIOout ) )
- return( FALSE );
-
- // Send a repeated start condition and select the
- // slave for reading now.
- if( tl_i2c_tx_start(GPIOin, GPIOout) )
- tl_i2c_tx_byte( GPIOout, SLAVE_READ_ADDRESS );
-
- if ( !tl_i2c_rx_ack(GPIOin, GPIOout) )
- return( FALSE );
-
- // this loop will now read out the data and store it
- // in the buffer pointed to by buf
- for ( i=0; i<count; i++)
- {
- *buf++ = tl_i2c_rx_byte(GPIOin, GPIOout);
-
- // Send ACK by holding data line low for 1 clock
- if ( i < (count-1) )
- tl_i2c_clock_pulse( 0x08, GPIOout );
- else {
- // Don't send ack for final byte
- tl_i2c_clock_pulse( SET_DATA_HI, GPIOout );
- }
- }
-
- tl_i2c_tx_stop(GPIOin, GPIOout);
-
- return( TRUE );
-}
-
-//****************************************************************
-//
-//
-//
-// routines to set and clear the data and clock bits
-//
-//
-//
-//****************************************************************
-
-static void tl_set_clock(void* gpioreg)
-{
- ULONG ret_val;
-
- ret_val = readl( gpioreg );
- ret_val &= 0xffffffFBL; // clear GPIO2 (SCL)
- writel( ret_val, gpioreg);
-}
-
-static void tl_clr_clock(void* gpioreg)
-{
- ULONG ret_val;
-
- ret_val = readl( gpioreg );
- ret_val |= SET_CLOCK_LO;
- writel( ret_val, gpioreg);
-}
-
-//*****************************************************************
-//
-//
-// This routine will advance the clock by one period
-//
-//
-//*****************************************************************
-static void tl_i2c_clock_pulse( UCHAR value, void* GPIOout )
-{
- ULONG ret_val;
-
- // clear the clock bit
- tl_clr_clock( GPIOout );
-
- i2c_delay(0);
-
-
- // read the port to preserve non-I2C bits
- ret_val = readl( GPIOout );
-
- // clear the data & clock bits
- ret_val &= 0xFFFFFFf3;
-
- // write the value passed in...
- // data can only change while clock is LOW!
- ret_val |= value; // the data
- ret_val |= SET_CLOCK_LO; // the clock
- writel( ret_val, GPIOout );
-
- i2c_delay(0);
-
-
- //set clock bit
- tl_set_clock( GPIOout);
-}
-
-
-
-
-//*****************************************************************
-//
-//
-// This routine returns the 64-bit WWN
-//
-//
-//*****************************************************************
-int cpqfcTS_GetNVRAM_data( UCHAR *wwnbuf, UCHAR *buf )
-{
- ULONG len;
- ULONG sub_len;
- ULONG ptr_inc;
- ULONG i;
- ULONG j;
- UCHAR *data_ptr;
- UCHAR z;
- UCHAR name;
- UCHAR sub_name;
- UCHAR done;
- int iReturn=0; // def. 0 offset is failure to find WWN field
-
-
-
- data_ptr = (UCHAR *)buf;
-
- done = FALSE;
- i = 0;
-
- while ( (i < 128) && (!done) )
- {
- z = data_ptr[i];\
- if ( !(z & 0x80) )
- {
- len = 1 + (z & 0x07);
-
- name = (z & 0x78) >> 3;
- if (name == 0x0F)
- done = TRUE;
- }
- else
- {
- name = z & 0x7F;
- len = 3 + data_ptr[i+1] + (data_ptr[i+2] << 8);
-
- switch (name)
- {
- case 0x0D:
- //
- j = i + 3;
- //
- if ( data_ptr[j] == 0x3b ) {
- len = 6;
- break;
- }
-
- while ( j<(i+len) ) {
- sub_name = (data_ptr[j] & 0x3f);
- sub_len = data_ptr[j+1] +
- (data_ptr[j+2] << 8);
- ptr_inc = sub_len + 3;
- switch (sub_name)
- {
- case 0x3C:
- memcpy( wwnbuf, &data_ptr[j+3], 8);
- iReturn = j+3;
- break;
- default:
- break;
- }
- j += ptr_inc;
- }
- break;
- default:
- break;
- }
- }
- //
- i += len;
- } // end while
- return iReturn;
-}
-
-
-
-
-
-// define a short 5 micro sec delay, and longer (ms) delay
-
-static void i2c_delay(ULONG mstime)
-{
- ULONG i;
-
-// NOTE: we only expect to use these delays when reading
-// our adapter's NVRAM, which happens only during adapter reset.
-// Delay technique from "Linux Device Drivers", A. Rubini
-// (1st Ed.) pg 137.
-
-// printk(" delay %lx ", mstime);
- if( mstime ) // ms delay?
- {
- // delay technique
- for( i=0; i < mstime; i++)
- udelay(1000); // 1ms per loop
-
- }
- else // 5 micro sec delay
-
- udelay( 5 ); // micro secs
-
-// printk("done\n");
-}
-
-
-