diff options
Diffstat (limited to 'drivers/scsi/sata_via.c')
-rw-r--r-- | drivers/scsi/sata_via.c | 38 |
1 files changed, 21 insertions, 17 deletions
diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c index 80e291a..b3ecdbe 100644 --- a/drivers/scsi/sata_via.c +++ b/drivers/scsi/sata_via.c @@ -41,6 +41,7 @@ #include <linux/init.h> #include <linux/blkdev.h> #include <linux/delay.h> +#include <linux/device.h> #include "scsi.h" #include <scsi/scsi_host.h> #include <linux/libata.h> @@ -259,15 +260,15 @@ static void svia_configure(struct pci_dev *pdev) u8 tmp8; pci_read_config_byte(pdev, PCI_INTERRUPT_LINE, &tmp8); - printk(KERN_INFO DRV_NAME "(%s): routed to hard irq line %d\n", - pci_name(pdev), + dev_printk(KERN_INFO, &pdev->dev, "routed to hard irq line %d\n", (int) (tmp8 & 0xf0) == 0xf0 ? 0 : tmp8 & 0x0f); /* make sure SATA channels are enabled */ pci_read_config_byte(pdev, SATA_CHAN_ENAB, &tmp8); if ((tmp8 & ALL_PORTS) != ALL_PORTS) { - printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channels (0x%x)\n", - pci_name(pdev), (int) tmp8); + dev_printk(KERN_DEBUG, &pdev->dev, + "enabling SATA channels (0x%x)\n", + (int) tmp8); tmp8 |= ALL_PORTS; pci_write_config_byte(pdev, SATA_CHAN_ENAB, tmp8); } @@ -275,8 +276,9 @@ static void svia_configure(struct pci_dev *pdev) /* make sure interrupts for each channel sent to us */ pci_read_config_byte(pdev, SATA_INT_GATE, &tmp8); if ((tmp8 & ALL_PORTS) != ALL_PORTS) { - printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channel interrupts (0x%x)\n", - pci_name(pdev), (int) tmp8); + dev_printk(KERN_DEBUG, &pdev->dev, + "enabling SATA channel interrupts (0x%x)\n", + (int) tmp8); tmp8 |= ALL_PORTS; pci_write_config_byte(pdev, SATA_INT_GATE, tmp8); } @@ -284,8 +286,9 @@ static void svia_configure(struct pci_dev *pdev) /* make sure native mode is enabled */ pci_read_config_byte(pdev, SATA_NATIVE_MODE, &tmp8); if ((tmp8 & NATIVE_MODE_ALL) != NATIVE_MODE_ALL) { - printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channel native mode (0x%x)\n", - pci_name(pdev), (int) tmp8); + dev_printk(KERN_DEBUG, &pdev->dev, + "enabling SATA channel native mode (0x%x)\n", + (int) tmp8); tmp8 |= NATIVE_MODE_ALL; pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8); } @@ -303,7 +306,7 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) u8 tmp8; if (!printed_version++) - printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); + dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); rc = pci_enable_device(pdev); if (rc) @@ -318,8 +321,9 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (board_id == vt6420) { pci_read_config_byte(pdev, SATA_PATA_SHARING, &tmp8); if (tmp8 & SATA_2DEV) { - printk(KERN_ERR DRV_NAME "(%s): SATA master/slave not supported (0x%x)\n", - pci_name(pdev), (int) tmp8); + dev_printk(KERN_ERR, &pdev->dev, + "SATA master/slave not supported (0x%x)\n", + (int) tmp8); rc = -EIO; goto err_out_regions; } @@ -332,10 +336,11 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) for (i = 0; i < ARRAY_SIZE(svia_bar_sizes); i++) if ((pci_resource_start(pdev, i) == 0) || (pci_resource_len(pdev, i) < bar_sizes[i])) { - printk(KERN_ERR DRV_NAME "(%s): invalid PCI BAR %u (sz 0x%lx, val 0x%lx)\n", - pci_name(pdev), i, - pci_resource_start(pdev, i), - pci_resource_len(pdev, i)); + dev_printk(KERN_ERR, &pdev->dev, + "invalid PCI BAR %u (sz 0x%lx, val 0x%lx)\n", + i, + pci_resource_start(pdev, i), + pci_resource_len(pdev, i)); rc = -ENODEV; goto err_out_regions; } @@ -353,8 +358,7 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) probe_ent = vt6421_init_probe_ent(pdev); if (!probe_ent) { - printk(KERN_ERR DRV_NAME "(%s): out of memory\n", - pci_name(pdev)); + dev_printk(KERN_ERR, &pdev->dev, "out of memory\n"); rc = -ENOMEM; goto err_out_regions; } |