diff options
Diffstat (limited to 'drivers/sensor/yas_pcb_test.h')
| -rw-r--r-- | drivers/sensor/yas_pcb_test.h | 106 |
1 files changed, 106 insertions, 0 deletions
diff --git a/drivers/sensor/yas_pcb_test.h b/drivers/sensor/yas_pcb_test.h new file mode 100644 index 0000000..40d9dbd --- /dev/null +++ b/drivers/sensor/yas_pcb_test.h @@ -0,0 +1,106 @@ +/* + * Copyright (c) 2010-2011 Yamaha Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +/* + * File yas_pcb_test.h + * Date 2013/1/22 + * Revision 1.4.3 + */ + +#ifndef __YAS_PCB_TEST_H__ +#define __YAS_PCB_TEST_H__ + +#include "yas_types.h" + +/* extra */ +#define YAS_PCBTEST_EXTRA + +/* error code */ +#define YAS_PCB_NO_ERROR (0) +#define YAS_PCB_ERROR_I2C (-1) +#define YAS_PCB_ERROR_POWER (-2) +#define YAS_PCB_ERROR_TEST_ORDER (-3) +#define YAS_PCB_ERROR_INTERRUPT (-4) +#define YAS_PCB_ERROR_BUSY (-5) +#define YAS_PCB_ERROR_OVERFLOW (-6) +#define YAS_PCB_ERROR_UNDERFLOW (-7) +#define YAS_PCB_ERROR_DIRCALC (-8) +#define YAS_PCB_ERROR_NOT_SUPPORTED (-9) +#define YAS_PCB_ERROR_CALREG (-10) +#define YAS_PCB_ERROR_ARG (-128) + +/* addr */ +#define YAS_PCB_ADDR_SLAVE (0x2E) + +#define YAS_PCB_ADDR_ID (0x80) +#define YAS_PCB_ADDR_COIL (0x81) +#define YAS_PCB_ADDR_MEASURE_COMMAND (0x82) +#define YAS_PCB_ADDR_CONFIG (0x83) +#define YAS_PCB_ADDR_MEASURE_INTERVAL (0x84) +#define YAS_PCB_ADDR_OFFSET (0x85) +#define YAS_PCB_ADDR_TEST1 (0x88) +#define YAS_PCB_ADDR_TEST2 (0x89) +#define YAS_PCB_ADDR_CAL (0x90) +#define YAS_PCB_ADDR_MEASURE_DATA (0xB0) + +/* V Core */ +#define YAS_VCORE (18) +#define YAS_PCB_NOISE_OVERFLOW (6000) +#define YAS_PCB_NOISE_UNDERFLOW (2000) +#define YAS_PCB_NOISE_INTERVAL (50) + +struct yas_pcb_test_callback { + int (*power_on)(void); + int (*power_off)(void); + int (*i2c_open)(void); + int (*i2c_close)(void); + int (*i2c_write)(uint8_t, uint8_t, const uint8_t *, int); + int (*i2c_read)(uint8_t, uint8_t, uint8_t *, int); + void (*msleep)(int); + int (*read_intpin)(int *); +}; + +struct yas_pcb_test { + int (*power_on_and_device_check)(int *); + int (*initialization)(void); + int (*offset_control_measurement_and_set_offset_register) + (int *, int *, int *); + int (*direction_measurement)(int *); + int (*sensitivity_measurement_of_magnetic_sensor_by_test_coil) + (int *, int *); + int (*magnetic_field_level_check)(int *, int *, int *); + int (*noise_level_check)(int *, int *, int *); + int (*power_off)(void); + struct yas_pcb_test_callback callback; +}; + +/* prototype functions */ +#ifdef __cplusplus +extern "C" { +#endif + +int yas_pcb_test_init(struct yas_pcb_test *); + +#ifdef __cplusplus +} +#endif + +#endif /* ! __YAS_PCB_TEST_H__ */ + +/* end of file */ |