aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial/imx.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial/imx.c')
-rw-r--r--drivers/tty/serial/imx.c1380
1 files changed, 1380 insertions, 0 deletions
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
new file mode 100644
index 0000000..dfcf4b1
--- /dev/null
+++ b/drivers/tty/serial/imx.c
@@ -0,0 +1,1380 @@
+/*
+ * linux/drivers/serial/imx.c
+ *
+ * Driver for Motorola IMX serial ports
+ *
+ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *
+ * Author: Sascha Hauer <sascha@saschahauer.de>
+ * Copyright (C) 2004 Pengutronix
+ *
+ * Copyright (C) 2009 emlix GmbH
+ * Author: Fabian Godehardt (added IrDA support for iMX)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * [29-Mar-2005] Mike Lee
+ * Added hardware handshake
+ */
+
+#if defined(CONFIG_SERIAL_IMX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/platform_device.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/rational.h>
+#include <linux/slab.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
+
+/* Register definitions */
+#define URXD0 0x0 /* Receiver Register */
+#define URTX0 0x40 /* Transmitter Register */
+#define UCR1 0x80 /* Control Register 1 */
+#define UCR2 0x84 /* Control Register 2 */
+#define UCR3 0x88 /* Control Register 3 */
+#define UCR4 0x8c /* Control Register 4 */
+#define UFCR 0x90 /* FIFO Control Register */
+#define USR1 0x94 /* Status Register 1 */
+#define USR2 0x98 /* Status Register 2 */
+#define UESC 0x9c /* Escape Character Register */
+#define UTIM 0xa0 /* Escape Timer Register */
+#define UBIR 0xa4 /* BRM Incremental Register */
+#define UBMR 0xa8 /* BRM Modulator Register */
+#define UBRC 0xac /* Baud Rate Count Register */
+#define MX2_ONEMS 0xb0 /* One Millisecond register */
+#define UTS (cpu_is_mx1() ? 0xd0 : 0xb4) /* UART Test Register */
+
+/* UART Control Register Bit Fields.*/
+#define URXD_CHARRDY (1<<15)
+#define URXD_ERR (1<<14)
+#define URXD_OVRRUN (1<<13)
+#define URXD_FRMERR (1<<12)
+#define URXD_BRK (1<<11)
+#define URXD_PRERR (1<<10)
+#define UCR1_ADEN (1<<15) /* Auto dectect interrupt */
+#define UCR1_ADBR (1<<14) /* Auto detect baud rate */
+#define UCR1_TRDYEN (1<<13) /* Transmitter ready interrupt enable */
+#define UCR1_IDEN (1<<12) /* Idle condition interrupt */
+#define UCR1_RRDYEN (1<<9) /* Recv ready interrupt enable */
+#define UCR1_RDMAEN (1<<8) /* Recv ready DMA enable */
+#define UCR1_IREN (1<<7) /* Infrared interface enable */
+#define UCR1_TXMPTYEN (1<<6) /* Transimitter empty interrupt enable */
+#define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */
+#define UCR1_SNDBRK (1<<4) /* Send break */
+#define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */
+#define MX1_UCR1_UARTCLKEN (1<<2) /* UART clock enabled, mx1 only */
+#define UCR1_DOZE (1<<1) /* Doze */
+#define UCR1_UARTEN (1<<0) /* UART enabled */
+#define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */
+#define UCR2_IRTS (1<<14) /* Ignore RTS pin */
+#define UCR2_CTSC (1<<13) /* CTS pin control */
+#define UCR2_CTS (1<<12) /* Clear to send */
+#define UCR2_ESCEN (1<<11) /* Escape enable */
+#define UCR2_PREN (1<<8) /* Parity enable */
+#define UCR2_PROE (1<<7) /* Parity odd/even */
+#define UCR2_STPB (1<<6) /* Stop */
+#define UCR2_WS (1<<5) /* Word size */
+#define UCR2_RTSEN (1<<4) /* Request to send interrupt enable */
+#define UCR2_TXEN (1<<2) /* Transmitter enabled */
+#define UCR2_RXEN (1<<1) /* Receiver enabled */
+#define UCR2_SRST (1<<0) /* SW reset */
+#define UCR3_DTREN (1<<13) /* DTR interrupt enable */
+#define UCR3_PARERREN (1<<12) /* Parity enable */
+#define UCR3_FRAERREN (1<<11) /* Frame error interrupt enable */
+#define UCR3_DSR (1<<10) /* Data set ready */
+#define UCR3_DCD (1<<9) /* Data carrier detect */
+#define UCR3_RI (1<<8) /* Ring indicator */
+#define UCR3_TIMEOUTEN (1<<7) /* Timeout interrupt enable */
+#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */
+#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */
+#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */
+#define MX1_UCR3_REF25 (1<<3) /* Ref freq 25 MHz, only on mx1 */
+#define MX1_UCR3_REF30 (1<<2) /* Ref Freq 30 MHz, only on mx1 */
+#define MX2_UCR3_RXDMUXSEL (1<<2) /* RXD Muxed Input Select, on mx2/mx3 */
+#define UCR3_INVT (1<<1) /* Inverted Infrared transmission */
+#define UCR3_BPEN (1<<0) /* Preset registers enable */
+#define UCR4_CTSTL_SHF 10 /* CTS trigger level shift */
+#define UCR4_CTSTL_MASK 0x3F /* CTS trigger is 6 bits wide */
+#define UCR4_INVR (1<<9) /* Inverted infrared reception */
+#define UCR4_ENIRI (1<<8) /* Serial infrared interrupt enable */
+#define UCR4_WKEN (1<<7) /* Wake interrupt enable */
+#define UCR4_REF16 (1<<6) /* Ref freq 16 MHz */
+#define UCR4_IRSC (1<<5) /* IR special case */
+#define UCR4_TCEN (1<<3) /* Transmit complete interrupt enable */
+#define UCR4_BKEN (1<<2) /* Break condition interrupt enable */
+#define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */
+#define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */
+#define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */
+#define UFCR_RFDIV (7<<7) /* Reference freq divider mask */
+#define UFCR_RFDIV_REG(x) (((x) < 7 ? 6 - (x) : 6) << 7)
+#define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */
+#define USR1_PARITYERR (1<<15) /* Parity error interrupt flag */
+#define USR1_RTSS (1<<14) /* RTS pin status */
+#define USR1_TRDY (1<<13) /* Transmitter ready interrupt/dma flag */
+#define USR1_RTSD (1<<12) /* RTS delta */
+#define USR1_ESCF (1<<11) /* Escape seq interrupt flag */
+#define USR1_FRAMERR (1<<10) /* Frame error interrupt flag */
+#define USR1_RRDY (1<<9) /* Receiver ready interrupt/dma flag */
+#define USR1_TIMEOUT (1<<7) /* Receive timeout interrupt status */
+#define USR1_RXDS (1<<6) /* Receiver idle interrupt flag */
+#define USR1_AIRINT (1<<5) /* Async IR wake interrupt flag */
+#define USR1_AWAKE (1<<4) /* Aysnc wake interrupt flag */
+#define USR2_ADET (1<<15) /* Auto baud rate detect complete */
+#define USR2_TXFE (1<<14) /* Transmit buffer FIFO empty */
+#define USR2_DTRF (1<<13) /* DTR edge interrupt flag */
+#define USR2_IDLE (1<<12) /* Idle condition */
+#define USR2_IRINT (1<<8) /* Serial infrared interrupt flag */
+#define USR2_WAKE (1<<7) /* Wake */
+#define USR2_RTSF (1<<4) /* RTS edge interrupt flag */
+#define USR2_TXDC (1<<3) /* Transmitter complete */
+#define USR2_BRCD (1<<2) /* Break condition */
+#define USR2_ORE (1<<1) /* Overrun error */
+#define USR2_RDR (1<<0) /* Recv data ready */
+#define UTS_FRCPERR (1<<13) /* Force parity error */
+#define UTS_LOOP (1<<12) /* Loop tx and rx */
+#define UTS_TXEMPTY (1<<6) /* TxFIFO empty */
+#define UTS_RXEMPTY (1<<5) /* RxFIFO empty */
+#define UTS_TXFULL (1<<4) /* TxFIFO full */
+#define UTS_RXFULL (1<<3) /* RxFIFO full */
+#define UTS_SOFTRST (1<<0) /* Software reset */
+
+/* We've been assigned a range on the "Low-density serial ports" major */
+#define SERIAL_IMX_MAJOR 207
+#define MINOR_START 16
+#define DEV_NAME "ttymxc"
+#define MAX_INTERNAL_IRQ MXC_INTERNAL_IRQS
+
+/*
+ * This determines how often we check the modem status signals
+ * for any change. They generally aren't connected to an IRQ
+ * so we have to poll them. We also check immediately before
+ * filling the TX fifo incase CTS has been dropped.
+ */
+#define MCTRL_TIMEOUT (250*HZ/1000)
+
+#define DRIVER_NAME "IMX-uart"
+
+#define UART_NR 8
+
+struct imx_port {
+ struct uart_port port;
+ struct timer_list timer;
+ unsigned int old_status;
+ int txirq,rxirq,rtsirq;
+ unsigned int have_rtscts:1;
+ unsigned int use_irda:1;
+ unsigned int irda_inv_rx:1;
+ unsigned int irda_inv_tx:1;
+ unsigned short trcv_delay; /* transceiver delay */
+ struct clk *clk;
+};
+
+#ifdef CONFIG_IRDA
+#define USE_IRDA(sport) ((sport)->use_irda)
+#else
+#define USE_IRDA(sport) (0)
+#endif
+
+/*
+ * Handle any change of modem status signal since we were last called.
+ */
+static void imx_mctrl_check(struct imx_port *sport)
+{
+ unsigned int status, changed;
+
+ status = sport->port.ops->get_mctrl(&sport->port);
+ changed = status ^ sport->old_status;
+
+ if (changed == 0)
+ return;
+
+ sport->old_status = status;
+
+ if (changed & TIOCM_RI)
+ sport->port.icount.rng++;
+ if (changed & TIOCM_DSR)
+ sport->port.icount.dsr++;
+ if (changed & TIOCM_CAR)
+ uart_handle_dcd_change(&sport->port, status & TIOCM_CAR);
+ if (changed & TIOCM_CTS)
+ uart_handle_cts_change(&sport->port, status & TIOCM_CTS);
+
+ wake_up_interruptible(&sport->port.state->port.delta_msr_wait);
+}
+
+/*
+ * This is our per-port timeout handler, for checking the
+ * modem status signals.
+ */
+static void imx_timeout(unsigned long data)
+{
+ struct imx_port *sport = (struct imx_port *)data;
+ unsigned long flags;
+
+ if (sport->port.state) {
+ spin_lock_irqsave(&sport->port.lock, flags);
+ imx_mctrl_check(sport);
+ spin_unlock_irqrestore(&sport->port.lock, flags);
+
+ mod_timer(&sport->timer, jiffies + MCTRL_TIMEOUT);
+ }
+}
+
+/*
+ * interrupts disabled on entry
+ */
+static void imx_stop_tx(struct uart_port *port)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+ unsigned long temp;
+
+ if (USE_IRDA(sport)) {
+ /* half duplex - wait for end of transmission */
+ int n = 256;
+ while ((--n > 0) &&
+ !(readl(sport->port.membase + USR2) & USR2_TXDC)) {
+ udelay(5);
+ barrier();
+ }
+ /*
+ * irda transceiver - wait a bit more to avoid
+ * cutoff, hardware dependent
+ */
+ udelay(sport->trcv_delay);
+
+ /*
+ * half duplex - reactivate receive mode,
+ * flush receive pipe echo crap
+ */
+ if (readl(sport->port.membase + USR2) & USR2_TXDC) {
+ temp = readl(sport->port.membase + UCR1);
+ temp &= ~(UCR1_TXMPTYEN | UCR1_TRDYEN);
+ writel(temp, sport->port.membase + UCR1);
+
+ temp = readl(sport->port.membase + UCR4);
+ temp &= ~(UCR4_TCEN);
+ writel(temp, sport->port.membase + UCR4);
+
+ while (readl(sport->port.membase + URXD0) &
+ URXD_CHARRDY)
+ barrier();
+
+ temp = readl(sport->port.membase + UCR1);
+ temp |= UCR1_RRDYEN;
+ writel(temp, sport->port.membase + UCR1);
+
+ temp = readl(sport->port.membase + UCR4);
+ temp |= UCR4_DREN;
+ writel(temp, sport->port.membase + UCR4);
+ }
+ return;
+ }
+
+ temp = readl(sport->port.membase + UCR1);
+ writel(temp & ~UCR1_TXMPTYEN, sport->port.membase + UCR1);
+}
+
+/*
+ * interrupts disabled on entry
+ */
+static void imx_stop_rx(struct uart_port *port)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+ unsigned long temp;
+
+ temp = readl(sport->port.membase + UCR2);
+ writel(temp &~ UCR2_RXEN, sport->port.membase + UCR2);
+}
+
+/*
+ * Set the modem control timer to fire immediately.
+ */
+static void imx_enable_ms(struct uart_port *port)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+
+ mod_timer(&sport->timer, jiffies);
+}
+
+static inline void imx_transmit_buffer(struct imx_port *sport)
+{
+ struct circ_buf *xmit = &sport->port.state->xmit;
+
+ while (!uart_circ_empty(xmit) &&
+ !(readl(sport->port.membase + UTS) & UTS_TXFULL)) {
+ /* send xmit->buf[xmit->tail]
+ * out the port here */
+ writel(xmit->buf[xmit->tail], sport->port.membase + URTX0);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ sport->port.icount.tx++;
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&sport->port);
+
+ if (uart_circ_empty(xmit))
+ imx_stop_tx(&sport->port);
+}
+
+/*
+ * interrupts disabled on entry
+ */
+static void imx_start_tx(struct uart_port *port)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+ unsigned long temp;
+
+ if (USE_IRDA(sport)) {
+ /* half duplex in IrDA mode; have to disable receive mode */
+ temp = readl(sport->port.membase + UCR4);
+ temp &= ~(UCR4_DREN);
+ writel(temp, sport->port.membase + UCR4);
+
+ temp = readl(sport->port.membase + UCR1);
+ temp &= ~(UCR1_RRDYEN);
+ writel(temp, sport->port.membase + UCR1);
+ }
+
+ temp = readl(sport->port.membase + UCR1);
+ writel(temp | UCR1_TXMPTYEN, sport->port.membase + UCR1);
+
+ if (USE_IRDA(sport)) {
+ temp = readl(sport->port.membase + UCR1);
+ temp |= UCR1_TRDYEN;
+ writel(temp, sport->port.membase + UCR1);
+
+ temp = readl(sport->port.membase + UCR4);
+ temp |= UCR4_TCEN;
+ writel(temp, sport->port.membase + UCR4);
+ }
+
+ if (readl(sport->port.membase + UTS) & UTS_TXEMPTY)
+ imx_transmit_buffer(sport);
+}
+
+static irqreturn_t imx_rtsint(int irq, void *dev_id)
+{
+ struct imx_port *sport = dev_id;
+ unsigned int val = readl(sport->port.membase + USR1) & USR1_RTSS;
+ unsigned long flags;
+
+ spin_lock_irqsave(&sport->port.lock, flags);
+
+ writel(USR1_RTSD, sport->port.membase + USR1);
+ uart_handle_cts_change(&sport->port, !!val);
+ wake_up_interruptible(&sport->port.state->port.delta_msr_wait);
+
+ spin_unlock_irqrestore(&sport->port.lock, flags);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t imx_txint(int irq, void *dev_id)
+{
+ struct imx_port *sport = dev_id;
+ struct circ_buf *xmit = &sport->port.state->xmit;
+ unsigned long flags;
+
+ spin_lock_irqsave(&sport->port.lock,flags);
+ if (sport->port.x_char)
+ {
+ /* Send next char */
+ writel(sport->port.x_char, sport->port.membase + URTX0);
+ goto out;
+ }
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) {
+ imx_stop_tx(&sport->port);
+ goto out;
+ }
+
+ imx_transmit_buffer(sport);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&sport->port);
+
+out:
+ spin_unlock_irqrestore(&sport->port.lock,flags);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t imx_rxint(int irq, void *dev_id)
+{
+ struct imx_port *sport = dev_id;
+ unsigned int rx,flg,ignored = 0;
+ struct tty_struct *tty = sport->port.state->port.tty;
+ unsigned long flags, temp;
+
+ spin_lock_irqsave(&sport->port.lock,flags);
+
+ while (readl(sport->port.membase + USR2) & USR2_RDR) {
+ flg = TTY_NORMAL;
+ sport->port.icount.rx++;
+
+ rx = readl(sport->port.membase + URXD0);
+
+ temp = readl(sport->port.membase + USR2);
+ if (temp & USR2_BRCD) {
+ writel(USR2_BRCD, sport->port.membase + USR2);
+ if (uart_handle_break(&sport->port))
+ continue;
+ }
+
+ if (uart_handle_sysrq_char(&sport->port, (unsigned char)rx))
+ continue;
+
+ if (rx & (URXD_PRERR | URXD_OVRRUN | URXD_FRMERR) ) {
+ if (rx & URXD_PRERR)
+ sport->port.icount.parity++;
+ else if (rx & URXD_FRMERR)
+ sport->port.icount.frame++;
+ if (rx & URXD_OVRRUN)
+ sport->port.icount.overrun++;
+
+ if (rx & sport->port.ignore_status_mask) {
+ if (++ignored > 100)
+ goto out;
+ continue;
+ }
+
+ rx &= sport->port.read_status_mask;
+
+ if (rx & URXD_PRERR)
+ flg = TTY_PARITY;
+ else if (rx & URXD_FRMERR)
+ flg = TTY_FRAME;
+ if (rx & URXD_OVRRUN)
+ flg = TTY_OVERRUN;
+
+#ifdef SUPPORT_SYSRQ
+ sport->port.sysrq = 0;
+#endif
+ }
+
+ tty_insert_flip_char(tty, rx, flg);
+ }
+
+out:
+ spin_unlock_irqrestore(&sport->port.lock,flags);
+ tty_flip_buffer_push(tty);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t imx_int(int irq, void *dev_id)
+{
+ struct imx_port *sport = dev_id;
+ unsigned int sts;
+
+ sts = readl(sport->port.membase + USR1);
+
+ if (sts & USR1_RRDY)
+ imx_rxint(irq, dev_id);
+
+ if (sts & USR1_TRDY &&
+ readl(sport->port.membase + UCR1) & UCR1_TXMPTYEN)
+ imx_txint(irq, dev_id);
+
+ if (sts & USR1_RTSD)
+ imx_rtsint(irq, dev_id);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Return TIOCSER_TEMT when transmitter is not busy.
+ */
+static unsigned int imx_tx_empty(struct uart_port *port)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+
+ return (readl(sport->port.membase + USR2) & USR2_TXDC) ? TIOCSER_TEMT : 0;
+}
+
+/*
+ * We have a modem side uart, so the meanings of RTS and CTS are inverted.
+ */
+static unsigned int imx_get_mctrl(struct uart_port *port)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+ unsigned int tmp = TIOCM_DSR | TIOCM_CAR;
+
+ if (readl(sport->port.membase + USR1) & USR1_RTSS)
+ tmp |= TIOCM_CTS;
+
+ if (readl(sport->port.membase + UCR2) & UCR2_CTS)
+ tmp |= TIOCM_RTS;
+
+ return tmp;
+}
+
+static void imx_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+ unsigned long temp;
+
+ temp = readl(sport->port.membase + UCR2) & ~UCR2_CTS;
+
+ if (mctrl & TIOCM_RTS)
+ temp |= UCR2_CTS;
+
+ writel(temp, sport->port.membase + UCR2);
+}
+
+/*
+ * Interrupts always disabled.
+ */
+static void imx_break_ctl(struct uart_port *port, int break_state)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+ unsigned long flags, temp;
+
+ spin_lock_irqsave(&sport->port.lock, flags);
+
+ temp = readl(sport->port.membase + UCR1) & ~UCR1_SNDBRK;
+
+ if ( break_state != 0 )
+ temp |= UCR1_SNDBRK;
+
+ writel(temp, sport->port.membase + UCR1);
+
+ spin_unlock_irqrestore(&sport->port.lock, flags);
+}
+
+#define TXTL 2 /* reset default */
+#define RXTL 1 /* reset default */
+
+static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode)
+{
+ unsigned int val;
+ unsigned int ufcr_rfdiv;
+
+ /* set receiver / transmitter trigger level.
+ * RFDIV is set such way to satisfy requested uartclk value
+ */
+ val = TXTL << 10 | RXTL;
+ ufcr_rfdiv = (clk_get_rate(sport->clk) + sport->port.uartclk / 2)
+ / sport->port.uartclk;
+
+ if(!ufcr_rfdiv)
+ ufcr_rfdiv = 1;
+
+ val |= UFCR_RFDIV_REG(ufcr_rfdiv);
+
+ writel(val, sport->port.membase + UFCR);
+
+ return 0;
+}
+
+/* half the RX buffer size */
+#define CTSTL 16
+
+static int imx_startup(struct uart_port *port)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+ int retval;
+ unsigned long flags, temp;
+
+ imx_setup_ufcr(sport, 0);
+
+ /* disable the DREN bit (Data Ready interrupt enable) before
+ * requesting IRQs
+ */
+ temp = readl(sport->port.membase + UCR4);
+
+ if (USE_IRDA(sport))
+ temp |= UCR4_IRSC;
+
+ /* set the trigger level for CTS */
+ temp &= ~(UCR4_CTSTL_MASK<< UCR4_CTSTL_SHF);
+ temp |= CTSTL<< UCR4_CTSTL_SHF;
+
+ writel(temp & ~UCR4_DREN, sport->port.membase + UCR4);
+
+ if (USE_IRDA(sport)) {
+ /* reset fifo's and state machines */
+ int i = 100;
+ temp = readl(sport->port.membase + UCR2);
+ temp &= ~UCR2_SRST;
+ writel(temp, sport->port.membase + UCR2);
+ while (!(readl(sport->port.membase + UCR2) & UCR2_SRST) &&
+ (--i > 0)) {
+ udelay(1);
+ }
+ }
+
+ /*
+ * Allocate the IRQ(s) i.MX1 has three interrupts whereas later
+ * chips only have one interrupt.
+ */
+ if (sport->txirq > 0) {
+ retval = request_irq(sport->rxirq, imx_rxint, 0,
+ DRIVER_NAME, sport);
+ if (retval)
+ goto error_out1;
+
+ retval = request_irq(sport->txirq, imx_txint, 0,
+ DRIVER_NAME, sport);
+ if (retval)
+ goto error_out2;
+
+ /* do not use RTS IRQ on IrDA */
+ if (!USE_IRDA(sport)) {
+ retval = request_irq(sport->rtsirq, imx_rtsint,
+ (sport->rtsirq < MAX_INTERNAL_IRQ) ? 0 :
+ IRQF_TRIGGER_FALLING |
+ IRQF_TRIGGER_RISING,
+ DRIVER_NAME, sport);
+ if (retval)
+ goto error_out3;
+ }
+ } else {
+ retval = request_irq(sport->port.irq, imx_int, 0,
+ DRIVER_NAME, sport);
+ if (retval) {
+ free_irq(sport->port.irq, sport);
+ goto error_out1;
+ }
+ }
+
+ /*
+ * Finally, clear and enable interrupts
+ */
+ writel(USR1_RTSD, sport->port.membase + USR1);
+
+ temp = readl(sport->port.membase + UCR1);
+ temp |= UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN;
+
+ if (USE_IRDA(sport)) {
+ temp |= UCR1_IREN;
+ temp &= ~(UCR1_RTSDEN);
+ }
+
+ writel(temp, sport->port.membase + UCR1);
+
+ temp = readl(sport->port.membase + UCR2);
+ temp |= (UCR2_RXEN | UCR2_TXEN);
+ writel(temp, sport->port.membase + UCR2);
+
+ if (USE_IRDA(sport)) {
+ /* clear RX-FIFO */
+ int i = 64;
+ while ((--i > 0) &&
+ (readl(sport->port.membase + URXD0) & URXD_CHARRDY)) {
+ barrier();
+ }
+ }
+
+ if (!cpu_is_mx1()) {
+ temp = readl(sport->port.membase + UCR3);
+ temp |= MX2_UCR3_RXDMUXSEL;
+ writel(temp, sport->port.membase + UCR3);
+ }
+
+ if (USE_IRDA(sport)) {
+ temp = readl(sport->port.membase + UCR4);
+ if (sport->irda_inv_rx)
+ temp |= UCR4_INVR;
+ else
+ temp &= ~(UCR4_INVR);
+ writel(temp | UCR4_DREN, sport->port.membase + UCR4);
+
+ temp = readl(sport->port.membase + UCR3);
+ if (sport->irda_inv_tx)
+ temp |= UCR3_INVT;
+ else
+ temp &= ~(UCR3_INVT);
+ writel(temp, sport->port.membase + UCR3);
+ }
+
+ /*
+ * Enable modem status interrupts
+ */
+ spin_lock_irqsave(&sport->port.lock,flags);
+ imx_enable_ms(&sport->port);
+ spin_unlock_irqrestore(&sport->port.lock,flags);
+
+ if (USE_IRDA(sport)) {
+ struct imxuart_platform_data *pdata;
+ pdata = sport->port.dev->platform_data;
+ sport->irda_inv_rx = pdata->irda_inv_rx;
+ sport->irda_inv_tx = pdata->irda_inv_tx;
+ sport->trcv_delay = pdata->transceiver_delay;
+ if (pdata->irda_enable)
+ pdata->irda_enable(1);
+ }
+
+ return 0;
+
+error_out3:
+ if (sport->txirq)
+ free_irq(sport->txirq, sport);
+error_out2:
+ if (sport->rxirq)
+ free_irq(sport->rxirq, sport);
+error_out1:
+ return retval;
+}
+
+static void imx_shutdown(struct uart_port *port)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+ unsigned long temp;
+
+ temp = readl(sport->port.membase + UCR2);
+ temp &= ~(UCR2_TXEN);
+ writel(temp, sport->port.membase + UCR2);
+
+ if (USE_IRDA(sport)) {
+ struct imxuart_platform_data *pdata;
+ pdata = sport->port.dev->platform_data;
+ if (pdata->irda_enable)
+ pdata->irda_enable(0);
+ }
+
+ /*
+ * Stop our timer.
+ */
+ del_timer_sync(&sport->timer);
+
+ /*
+ * Free the interrupts
+ */
+ if (sport->txirq > 0) {
+ if (!USE_IRDA(sport))
+ free_irq(sport->rtsirq, sport);
+ free_irq(sport->txirq, sport);
+ free_irq(sport->rxirq, sport);
+ } else
+ free_irq(sport->port.irq, sport);
+
+ /*
+ * Disable all interrupts, port and break condition.
+ */
+
+ temp = readl(sport->port.membase + UCR1);
+ temp &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN);
+ if (USE_IRDA(sport))
+ temp &= ~(UCR1_IREN);
+
+ writel(temp, sport->port.membase + UCR1);
+}
+
+static void
+imx_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+ unsigned long flags;
+ unsigned int ucr2, old_ucr1, old_txrxen, baud, quot;
+ unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
+ unsigned int div, ufcr;
+ unsigned long num, denom;
+ uint64_t tdiv64;
+
+ /*
+ * If we don't support modem control lines, don't allow
+ * these to be set.
+ */
+ if (0) {
+ termios->c_cflag &= ~(HUPCL | CRTSCTS | CMSPAR);
+ termios->c_cflag |= CLOCAL;
+ }
+
+ /*
+ * We only support CS7 and CS8.
+ */
+ while ((termios->c_cflag & CSIZE) != CS7 &&
+ (termios->c_cflag & CSIZE) != CS8) {
+ termios->c_cflag &= ~CSIZE;
+ termios->c_cflag |= old_csize;
+ old_csize = CS8;
+ }
+
+ if ((termios->c_cflag & CSIZE) == CS8)
+ ucr2 = UCR2_WS | UCR2_SRST | UCR2_IRTS;
+ else
+ ucr2 = UCR2_SRST | UCR2_IRTS;
+
+ if (termios->c_cflag & CRTSCTS) {
+ if( sport->have_rtscts ) {
+ ucr2 &= ~UCR2_IRTS;
+ ucr2 |= UCR2_CTSC;
+ } else {
+ termios->c_cflag &= ~CRTSCTS;
+ }
+ }
+
+ if (termios->c_cflag & CSTOPB)
+ ucr2 |= UCR2_STPB;
+ if (termios->c_cflag & PARENB) {
+ ucr2 |= UCR2_PREN;
+ if (termios->c_cflag & PARODD)
+ ucr2 |= UCR2_PROE;
+ }
+
+ /*
+ * Ask the core to calculate the divisor for us.
+ */
+ baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16);
+ quot = uart_get_divisor(port, baud);
+
+ spin_lock_irqsave(&sport->port.lock, flags);
+
+ sport->port.read_status_mask = 0;
+ if (termios->c_iflag & INPCK)
+ sport->port.read_status_mask |= (URXD_FRMERR | URXD_PRERR);
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ sport->port.read_status_mask |= URXD_BRK;
+
+ /*
+ * Characters to ignore
+ */
+ sport->port.ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ sport->port.ignore_status_mask |= URXD_PRERR;
+ if (termios->c_iflag & IGNBRK) {
+ sport->port.ignore_status_mask |= URXD_BRK;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ sport->port.ignore_status_mask |= URXD_OVRRUN;
+ }
+
+ del_timer_sync(&sport->timer);
+
+ /*
+ * Update the per-port timeout.
+ */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ /*
+ * disable interrupts and drain transmitter
+ */
+ old_ucr1 = readl(sport->port.membase + UCR1);
+ writel(old_ucr1 & ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN),
+ sport->port.membase + UCR1);
+
+ while ( !(readl(sport->port.membase + USR2) & USR2_TXDC))
+ barrier();
+
+ /* then, disable everything */
+ old_txrxen = readl(sport->port.membase + UCR2);
+ writel(old_txrxen & ~( UCR2_TXEN | UCR2_RXEN),
+ sport->port.membase + UCR2);
+ old_txrxen &= (UCR2_TXEN | UCR2_RXEN);
+
+ if (USE_IRDA(sport)) {
+ /*
+ * use maximum available submodule frequency to
+ * avoid missing short pulses due to low sampling rate
+ */
+ div = 1;
+ } else {
+ div = sport->port.uartclk / (baud * 16);
+ if (div > 7)
+ div = 7;
+ if (!div)
+ div = 1;
+ }
+
+ rational_best_approximation(16 * div * baud, sport->port.uartclk,
+ 1 << 16, 1 << 16, &num, &denom);
+
+ tdiv64 = sport->port.uartclk;
+ tdiv64 *= num;
+ do_div(tdiv64, denom * 16 * div);
+ tty_termios_encode_baud_rate(termios,
+ (speed_t)tdiv64, (speed_t)tdiv64);
+
+ num -= 1;
+ denom -= 1;
+
+ ufcr = readl(sport->port.membase + UFCR);
+ ufcr = (ufcr & (~UFCR_RFDIV)) | UFCR_RFDIV_REG(div);
+ writel(ufcr, sport->port.membase + UFCR);
+
+ writel(num, sport->port.membase + UBIR);
+ writel(denom, sport->port.membase + UBMR);
+
+ if (!cpu_is_mx1())
+ writel(sport->port.uartclk / div / 1000,
+ sport->port.membase + MX2_ONEMS);
+
+ writel(old_ucr1, sport->port.membase + UCR1);
+
+ /* set the parity, stop bits and data size */
+ writel(ucr2 | old_txrxen, sport->port.membase + UCR2);
+
+ if (UART_ENABLE_MS(&sport->port, termios->c_cflag))
+ imx_enable_ms(&sport->port);
+
+ spin_unlock_irqrestore(&sport->port.lock, flags);
+}
+
+static const char *imx_type(struct uart_port *port)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+
+ return sport->port.type == PORT_IMX ? "IMX" : NULL;
+}
+
+/*
+ * Release the memory region(s) being used by 'port'.
+ */
+static void imx_release_port(struct uart_port *port)
+{
+ struct platform_device *pdev = to_platform_device(port->dev);
+ struct resource *mmres;
+
+ mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(mmres->start, mmres->end - mmres->start + 1);
+}
+
+/*
+ * Request the memory region(s) being used by 'port'.
+ */
+static int imx_request_port(struct uart_port *port)
+{
+ struct platform_device *pdev = to_platform_device(port->dev);
+ struct resource *mmres;
+ void *ret;
+
+ mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mmres)
+ return -ENODEV;
+
+ ret = request_mem_region(mmres->start, mmres->end - mmres->start + 1,
+ "imx-uart");
+
+ return ret ? 0 : -EBUSY;
+}
+
+/*
+ * Configure/autoconfigure the port.
+ */
+static void imx_config_port(struct uart_port *port, int flags)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+
+ if (flags & UART_CONFIG_TYPE &&
+ imx_request_port(&sport->port) == 0)
+ sport->port.type = PORT_IMX;
+}
+
+/*
+ * Verify the new serial_struct (for TIOCSSERIAL).
+ * The only change we allow are to the flags and type, and
+ * even then only between PORT_IMX and PORT_UNKNOWN
+ */
+static int
+imx_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+ int ret = 0;
+
+ if (ser->type != PORT_UNKNOWN && ser->type != PORT_IMX)
+ ret = -EINVAL;
+ if (sport->port.irq != ser->irq)
+ ret = -EINVAL;
+ if (ser->io_type != UPIO_MEM)
+ ret = -EINVAL;
+ if (sport->port.uartclk / 16 != ser->baud_base)
+ ret = -EINVAL;
+ if ((void *)sport->port.mapbase != ser->iomem_base)
+ ret = -EINVAL;
+ if (sport->port.iobase != ser->port)
+ ret = -EINVAL;
+ if (ser->hub6 != 0)
+ ret = -EINVAL;
+ return ret;
+}
+
+static struct uart_ops imx_pops = {
+ .tx_empty = imx_tx_empty,
+ .set_mctrl = imx_set_mctrl,
+ .get_mctrl = imx_get_mctrl,
+ .stop_tx = imx_stop_tx,
+ .start_tx = imx_start_tx,
+ .stop_rx = imx_stop_rx,
+ .enable_ms = imx_enable_ms,
+ .break_ctl = imx_break_ctl,
+ .startup = imx_startup,
+ .shutdown = imx_shutdown,
+ .set_termios = imx_set_termios,
+ .type = imx_type,
+ .release_port = imx_release_port,
+ .request_port = imx_request_port,
+ .config_port = imx_config_port,
+ .verify_port = imx_verify_port,
+};
+
+static struct imx_port *imx_ports[UART_NR];
+
+#ifdef CONFIG_SERIAL_IMX_CONSOLE
+static void imx_console_putchar(struct uart_port *port, int ch)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+
+ while (readl(sport->port.membase + UTS) & UTS_TXFULL)
+ barrier();
+
+ writel(ch, sport->port.membase + URTX0);
+}
+
+/*
+ * Interrupts are disabled on entering
+ */
+static void
+imx_console_write(struct console *co, const char *s, unsigned int count)
+{
+ struct imx_port *sport = imx_ports[co->index];
+ unsigned int old_ucr1, old_ucr2, ucr1;
+
+ /*
+ * First, save UCR1/2 and then disable interrupts
+ */
+ ucr1 = old_ucr1 = readl(sport->port.membase + UCR1);
+ old_ucr2 = readl(sport->port.membase + UCR2);
+
+ if (cpu_is_mx1())
+ ucr1 |= MX1_UCR1_UARTCLKEN;
+ ucr1 |= UCR1_UARTEN;
+ ucr1 &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN);
+
+ writel(ucr1, sport->port.membase + UCR1);
+
+ writel(old_ucr2 | UCR2_TXEN, sport->port.membase + UCR2);
+
+ uart_console_write(&sport->port, s, count, imx_console_putchar);
+
+ /*
+ * Finally, wait for transmitter to become empty
+ * and restore UCR1/2
+ */
+ while (!(readl(sport->port.membase + USR2) & USR2_TXDC));
+
+ writel(old_ucr1, sport->port.membase + UCR1);
+ writel(old_ucr2, sport->port.membase + UCR2);
+}
+
+/*
+ * If the port was already initialised (eg, by a boot loader),
+ * try to determine the current setup.
+ */
+static void __init
+imx_console_get_options(struct imx_port *sport, int *baud,
+ int *parity, int *bits)
+{
+
+ if (readl(sport->port.membase + UCR1) & UCR1_UARTEN) {
+ /* ok, the port was enabled */
+ unsigned int ucr2, ubir,ubmr, uartclk;
+ unsigned int baud_raw;
+ unsigned int ucfr_rfdiv;
+
+ ucr2 = readl(sport->port.membase + UCR2);
+
+ *parity = 'n';
+ if (ucr2 & UCR2_PREN) {
+ if (ucr2 & UCR2_PROE)
+ *parity = 'o';
+ else
+ *parity = 'e';
+ }
+
+ if (ucr2 & UCR2_WS)
+ *bits = 8;
+ else
+ *bits = 7;
+
+ ubir = readl(sport->port.membase + UBIR) & 0xffff;
+ ubmr = readl(sport->port.membase + UBMR) & 0xffff;
+
+ ucfr_rfdiv = (readl(sport->port.membase + UFCR) & UFCR_RFDIV) >> 7;
+ if (ucfr_rfdiv == 6)
+ ucfr_rfdiv = 7;
+ else
+ ucfr_rfdiv = 6 - ucfr_rfdiv;
+
+ uartclk = clk_get_rate(sport->clk);
+ uartclk /= ucfr_rfdiv;
+
+ { /*
+ * The next code provides exact computation of
+ * baud_raw = round(((uartclk/16) * (ubir + 1)) / (ubmr + 1))
+ * without need of float support or long long division,
+ * which would be required to prevent 32bit arithmetic overflow
+ */
+ unsigned int mul = ubir + 1;
+ unsigned int div = 16 * (ubmr + 1);
+ unsigned int rem = uartclk % div;
+
+ baud_raw = (uartclk / div) * mul;
+ baud_raw += (rem * mul + div / 2) / div;
+ *baud = (baud_raw + 50) / 100 * 100;
+ }
+
+ if(*baud != baud_raw)
+ printk(KERN_INFO "Serial: Console IMX rounded baud rate from %d to %d\n",
+ baud_raw, *baud);
+ }
+}
+
+static int __init
+imx_console_setup(struct console *co, char *options)
+{
+ struct imx_port *sport;
+ int baud = 9600;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ /*
+ * Check whether an invalid uart number has been specified, and
+ * if so, search for the first available port that does have
+ * console support.
+ */
+ if (co->index == -1 || co->index >= ARRAY_SIZE(imx_ports))
+ co->index = 0;
+ sport = imx_ports[co->index];
+ if(sport == NULL)
+ return -ENODEV;
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ else
+ imx_console_get_options(sport, &baud, &parity, &bits);
+
+ imx_setup_ufcr(sport, 0);
+
+ return uart_set_options(&sport->port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver imx_reg;
+static struct console imx_console = {
+ .name = DEV_NAME,
+ .write = imx_console_write,
+ .device = uart_console_device,
+ .setup = imx_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &imx_reg,
+};
+
+#define IMX_CONSOLE &imx_console
+#else
+#define IMX_CONSOLE NULL
+#endif
+
+static struct uart_driver imx_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = DRIVER_NAME,
+ .dev_name = DEV_NAME,
+ .major = SERIAL_IMX_MAJOR,
+ .minor = MINOR_START,
+ .nr = ARRAY_SIZE(imx_ports),
+ .cons = IMX_CONSOLE,
+};
+
+static int serial_imx_suspend(struct platform_device *dev, pm_message_t state)
+{
+ struct imx_port *sport = platform_get_drvdata(dev);
+
+ if (sport)
+ uart_suspend_port(&imx_reg, &sport->port);
+
+ return 0;
+}
+
+static int serial_imx_resume(struct platform_device *dev)
+{
+ struct imx_port *sport = platform_get_drvdata(dev);
+
+ if (sport)
+ uart_resume_port(&imx_reg, &sport->port);
+
+ return 0;
+}
+
+static int serial_imx_probe(struct platform_device *pdev)
+{
+ struct imx_port *sport;
+ struct imxuart_platform_data *pdata;
+ void __iomem *base;
+ int ret = 0;
+ struct resource *res;
+
+ sport = kzalloc(sizeof(*sport), GFP_KERNEL);
+ if (!sport)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ ret = -ENODEV;
+ goto free;
+ }
+
+ base = ioremap(res->start, PAGE_SIZE);
+ if (!base) {
+ ret = -ENOMEM;
+ goto free;
+ }
+
+ sport->port.dev = &pdev->dev;
+ sport->port.mapbase = res->start;
+ sport->port.membase = base;
+ sport->port.type = PORT_IMX,
+ sport->port.iotype = UPIO_MEM;
+ sport->port.irq = platform_get_irq(pdev, 0);
+ sport->rxirq = platform_get_irq(pdev, 0);
+ sport->txirq = platform_get_irq(pdev, 1);
+ sport->rtsirq = platform_get_irq(pdev, 2);
+ sport->port.fifosize = 32;
+ sport->port.ops = &imx_pops;
+ sport->port.flags = UPF_BOOT_AUTOCONF;
+ sport->port.line = pdev->id;
+ init_timer(&sport->timer);
+ sport->timer.function = imx_timeout;
+ sport->timer.data = (unsigned long)sport;
+
+ sport->clk = clk_get(&pdev->dev, "uart");
+ if (IS_ERR(sport->clk)) {
+ ret = PTR_ERR(sport->clk);
+ goto unmap;
+ }
+ clk_enable(sport->clk);
+
+ sport->port.uartclk = clk_get_rate(sport->clk);
+
+ imx_ports[pdev->id] = sport;
+
+ pdata = pdev->dev.platform_data;
+ if (pdata && (pdata->flags & IMXUART_HAVE_RTSCTS))
+ sport->have_rtscts = 1;
+
+#ifdef CONFIG_IRDA
+ if (pdata && (pdata->flags & IMXUART_IRDA))
+ sport->use_irda = 1;
+#endif
+
+ if (pdata && pdata->init) {
+ ret = pdata->init(pdev);
+ if (ret)
+ goto clkput;
+ }
+
+ ret = uart_add_one_port(&imx_reg, &sport->port);
+ if (ret)
+ goto deinit;
+ platform_set_drvdata(pdev, &sport->port);
+
+ return 0;
+deinit:
+ if (pdata && pdata->exit)
+ pdata->exit(pdev);
+clkput:
+ clk_put(sport->clk);
+ clk_disable(sport->clk);
+unmap:
+ iounmap(sport->port.membase);
+free:
+ kfree(sport);
+
+ return ret;
+}
+
+static int serial_imx_remove(struct platform_device *pdev)
+{
+ struct imxuart_platform_data *pdata;
+ struct imx_port *sport = platform_get_drvdata(pdev);
+
+ pdata = pdev->dev.platform_data;
+
+ platform_set_drvdata(pdev, NULL);
+
+ if (sport) {
+ uart_remove_one_port(&imx_reg, &sport->port);
+ clk_put(sport->clk);
+ }
+
+ clk_disable(sport->clk);
+
+ if (pdata && pdata->exit)
+ pdata->exit(pdev);
+
+ iounmap(sport->port.membase);
+ kfree(sport);
+
+ return 0;
+}
+
+static struct platform_driver serial_imx_driver = {
+ .probe = serial_imx_probe,
+ .remove = serial_imx_remove,
+
+ .suspend = serial_imx_suspend,
+ .resume = serial_imx_resume,
+ .driver = {
+ .name = "imx-uart",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init imx_serial_init(void)
+{
+ int ret;
+
+ printk(KERN_INFO "Serial: IMX driver\n");
+
+ ret = uart_register_driver(&imx_reg);
+ if (ret)
+ return ret;
+
+ ret = platform_driver_register(&serial_imx_driver);
+ if (ret != 0)
+ uart_unregister_driver(&imx_reg);
+
+ return 0;
+}
+
+static void __exit imx_serial_exit(void)
+{
+ platform_driver_unregister(&serial_imx_driver);
+ uart_unregister_driver(&imx_reg);
+}
+
+module_init(imx_serial_init);
+module_exit(imx_serial_exit);
+
+MODULE_AUTHOR("Sascha Hauer");
+MODULE_DESCRIPTION("IMX generic serial port driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:imx-uart");