aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/Makefile2
-rw-r--r--drivers/net/bnx2x.h180
-rw-r--r--drivers/net/bnx2x_init.h7
-rw-r--r--drivers/net/bnx2x_main.c3097
-rw-r--r--drivers/net/bnx2x_reg.h1939
5 files changed, 1826 insertions, 3399 deletions
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 59842a1..87703ff 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -66,7 +66,7 @@ obj-$(CONFIG_FEALNX) += fealnx.o
obj-$(CONFIG_TIGON3) += tg3.o
obj-$(CONFIG_BNX2) += bnx2.o
obj-$(CONFIG_BNX2X) += bnx2x.o
-bnx2x-objs := bnx2x_main.o
+bnx2x-objs := bnx2x_main.o bnx2x_link.o
spidernet-y += spider_net.o spider_net_ethtool.o
obj-$(CONFIG_SPIDER_NET) += spidernet.o sungem_phy.o
obj-$(CONFIG_GELIC_NET) += ps3_gelic.o
diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index 8e68d06..2a13def 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -90,6 +90,12 @@
#define REG_RD_IND(bp, offset) bnx2x_reg_rd_ind(bp, offset)
#define REG_WR_IND(bp, offset, val) bnx2x_reg_wr_ind(bp, offset, val)
+#define REG_RD_DMAE(bp, offset, valp, len32) \
+ do { \
+ bnx2x_read_dmae(bp, offset, len32);\
+ memcpy(valp, bnx2x_sp(bp, wb_data[0]), len32 * 4); \
+ } while (0)
+
#define REG_WR_DMAE(bp, offset, val, len32) \
do { \
memcpy(bnx2x_sp(bp, wb_data[0]), val, len32 * 4); \
@@ -542,11 +548,8 @@ struct bnx2x {
int pm_cap;
int pcie_cap;
- /* Used to synchronize phy accesses */
- spinlock_t phy_lock;
-
- struct work_struct reset_task;
- struct work_struct sp_task;
+ struct work_struct sp_task;
+ struct work_struct reset_task;
struct timer_list timer;
int timer_interval;
@@ -568,6 +571,8 @@ struct bnx2x {
#define CHIP_REV_FPGA 0x0000f000
#define CHIP_REV_IS_SLOW(bp) ((CHIP_REV(bp) == CHIP_REV_EMUL) || \
(CHIP_REV(bp) == CHIP_REV_FPGA))
+#define CHIP_REV_IS_EMUL(bp) (CHIP_REV(bp) == CHIP_REV_EMUL)
+#define CHIP_REV_IS_FPGA(bp) (CHIP_REV(bp) == CHIP_REV_FPGA)
#define CHIP_METAL(bp) (((bp)->chip_id) & 0x00000ff0)
#define CHIP_BOND_ID(bp) (((bp)->chip_id) & 0x0000000f)
@@ -578,84 +583,29 @@ struct bnx2x {
u32 hw_config;
u32 board;
- u32 serdes_config;
- u32 lane_config;
- u32 ext_phy_config;
-#define XGXS_EXT_PHY_TYPE(bp) (bp->ext_phy_config & \
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK)
-#define SERDES_EXT_PHY_TYPE(bp) (bp->ext_phy_config & \
- PORT_HW_CFG_SERDES_EXT_PHY_TYPE_MASK)
-
- u32 speed_cap_mask;
- u32 link_config;
-#define SWITCH_CFG_1G PORT_FEATURE_CON_SWITCH_1G_SWITCH
-#define SWITCH_CFG_10G PORT_FEATURE_CON_SWITCH_10G_SWITCH
-#define SWITCH_CFG_AUTO_DETECT PORT_FEATURE_CON_SWITCH_AUTO_DETECT
-#define SWITCH_CFG_ONE_TIME_DETECT \
- PORT_FEATURE_CON_SWITCH_ONE_TIME_DETECT
-
- u8 ser_lane;
- u8 rx_lane_swap;
- u8 tx_lane_swap;
-
- u8 link_up;
- u8 phy_link_up;
+
+ struct link_params link_params;
+
+ struct link_vars link_vars;
+
+ u32 link_config;
u32 supported;
/* link settings - missing defines */
#define SUPPORTED_2500baseT_Full (1 << 15)
- u32 phy_flags;
-/*#define PHY_SERDES_FLAG 0x1*/
-#define PHY_BMAC_FLAG 0x2
-#define PHY_EMAC_FLAG 0x4
-#define PHY_XGXS_FLAG 0x8
-#define PHY_SGMII_FLAG 0x10
-#define PHY_INT_MODE_MASK_FLAG 0x300
-#define PHY_INT_MODE_AUTO_POLLING_FLAG 0x100
-#define PHY_INT_MODE_LINK_READY_FLAG 0x200
-
u32 phy_addr;
+
+ /* used to synchronize phy accesses */
+ struct mutex phy_mutex;
+
u32 phy_id;
- u32 autoneg;
-#define AUTONEG_CL37 SHARED_HW_CFG_AN_ENABLE_CL37
-#define AUTONEG_CL73 SHARED_HW_CFG_AN_ENABLE_CL73
-#define AUTONEG_BAM SHARED_HW_CFG_AN_ENABLE_BAM
-#define AUTONEG_PARALLEL \
- SHARED_HW_CFG_AN_ENABLE_PARALLEL_DETECTION
-#define AUTONEG_SGMII_FIBER_AUTODET \
- SHARED_HW_CFG_AN_EN_SGMII_FIBER_AUTO_DETECT
-#define AUTONEG_REMOTE_PHY SHARED_HW_CFG_AN_ENABLE_REMOTE_PHY
-
- u32 req_autoneg;
-#define AUTONEG_SPEED 0x1
-#define AUTONEG_FLOW_CTRL 0x2
-
- u32 req_line_speed;
-/* link settings - missing defines */
-#define SPEED_12000 12000
-#define SPEED_12500 12500
-#define SPEED_13000 13000
-#define SPEED_15000 15000
-#define SPEED_16000 16000
-
- u32 req_duplex;
- u32 req_flow_ctrl;
-#define FLOW_CTRL_AUTO PORT_FEATURE_FLOW_CONTROL_AUTO
-#define FLOW_CTRL_TX PORT_FEATURE_FLOW_CONTROL_TX
-#define FLOW_CTRL_RX PORT_FEATURE_FLOW_CONTROL_RX
-#define FLOW_CTRL_BOTH PORT_FEATURE_FLOW_CONTROL_BOTH
-#define FLOW_CTRL_NONE PORT_FEATURE_FLOW_CONTROL_NONE
u32 advertising;
/* link settings - missing defines */
#define ADVERTISED_2500baseT_Full (1 << 15)
- u32 link_status;
- u32 line_speed;
- u32 duplex;
- u32 flow_ctrl;
u32 bc_ver;
@@ -765,6 +715,11 @@ struct bnx2x {
#define DMAE_LEN32_MAX 0x400
+void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32);
+void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr, u32 dst_addr,
+ u32 len32);
+int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode);
+
/* MC hsi */
#define RX_COPY_THRESH 92
@@ -890,91 +845,6 @@ struct bnx2x {
(1 << PARSING_FLAGS_OVER_ETHERNET_PROTOCOL_SHIFT))
-#define MDIO_AN_CL73_OR_37_COMPLETE \
- (MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE | \
- MDIO_GP_STATUS_TOP_AN_STATUS1_CL37_AUTONEG_COMPLETE)
-
-#define GP_STATUS_PAUSE_RSOLUTION_TXSIDE \
- MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_TXSIDE
-#define GP_STATUS_PAUSE_RSOLUTION_RXSIDE \
- MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_RXSIDE
-#define GP_STATUS_SPEED_MASK \
- MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_MASK
-#define GP_STATUS_10M MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10M
-#define GP_STATUS_100M MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_100M
-#define GP_STATUS_1G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G
-#define GP_STATUS_2_5G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_2_5G
-#define GP_STATUS_5G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_5G
-#define GP_STATUS_6G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_6G
-#define GP_STATUS_10G_HIG \
- MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_HIG
-#define GP_STATUS_10G_CX4 \
- MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_CX4
-#define GP_STATUS_12G_HIG \
- MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12G_HIG
-#define GP_STATUS_12_5G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12_5G
-#define GP_STATUS_13G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_13G
-#define GP_STATUS_15G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_15G
-#define GP_STATUS_16G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_16G
-#define GP_STATUS_1G_KX MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G_KX
-#define GP_STATUS_10G_KX4 \
- MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KX4
-
-#define LINK_10THD LINK_STATUS_SPEED_AND_DUPLEX_10THD
-#define LINK_10TFD LINK_STATUS_SPEED_AND_DUPLEX_10TFD
-#define LINK_100TXHD LINK_STATUS_SPEED_AND_DUPLEX_100TXHD
-#define LINK_100T4 LINK_STATUS_SPEED_AND_DUPLEX_100T4
-#define LINK_100TXFD LINK_STATUS_SPEED_AND_DUPLEX_100TXFD
-#define LINK_1000THD LINK_STATUS_SPEED_AND_DUPLEX_1000THD
-#define LINK_1000TFD LINK_STATUS_SPEED_AND_DUPLEX_1000TFD
-#define LINK_1000XFD LINK_STATUS_SPEED_AND_DUPLEX_1000XFD
-#define LINK_2500THD LINK_STATUS_SPEED_AND_DUPLEX_2500THD
-#define LINK_2500TFD LINK_STATUS_SPEED_AND_DUPLEX_2500TFD
-#define LINK_2500XFD LINK_STATUS_SPEED_AND_DUPLEX_2500XFD
-#define LINK_10GTFD LINK_STATUS_SPEED_AND_DUPLEX_10GTFD
-#define LINK_10GXFD LINK_STATUS_SPEED_AND_DUPLEX_10GXFD
-#define LINK_12GTFD LINK_STATUS_SPEED_AND_DUPLEX_12GTFD
-#define LINK_12GXFD LINK_STATUS_SPEED_AND_DUPLEX_12GXFD
-#define LINK_12_5GTFD LINK_STATUS_SPEED_AND_DUPLEX_12_5GTFD
-#define LINK_12_5GXFD LINK_STATUS_SPEED_AND_DUPLEX_12_5GXFD
-#define LINK_13GTFD LINK_STATUS_SPEED_AND_DUPLEX_13GTFD
-#define LINK_13GXFD LINK_STATUS_SPEED_AND_DUPLEX_13GXFD
-#define LINK_15GTFD LINK_STATUS_SPEED_AND_DUPLEX_15GTFD
-#define LINK_15GXFD LINK_STATUS_SPEED_AND_DUPLEX_15GXFD
-#define LINK_16GTFD LINK_STATUS_SPEED_AND_DUPLEX_16GTFD
-#define LINK_16GXFD LINK_STATUS_SPEED_AND_DUPLEX_16GXFD
-
-#define NIG_STATUS_XGXS0_LINK10G \
- NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G
-#define NIG_STATUS_XGXS0_LINK_STATUS \
- NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS
-#define NIG_STATUS_XGXS0_LINK_STATUS_SIZE \
- NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS_SIZE
-#define NIG_STATUS_SERDES0_LINK_STATUS \
- NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_SERDES0_LINK_STATUS
-#define NIG_MASK_MI_INT \
- NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT
-#define NIG_MASK_XGXS0_LINK10G \
- NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK10G
-#define NIG_MASK_XGXS0_LINK_STATUS \
- NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK_STATUS
-#define NIG_MASK_SERDES0_LINK_STATUS \
- NIG_MASK_INTERRUPT_PORT0_REG_MASK_SERDES0_LINK_STATUS
-
-#define XGXS_RESET_BITS \
- (MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_RSTB_HW | \
- MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_IDDQ | \
- MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN | \
- MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN_SD | \
- MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_TXD_FIFO_RSTB)
-
-#define SERDES_RESET_BITS \
- (MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_RSTB_HW | \
- MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_IDDQ | \
- MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN | \
- MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN_SD)
-
-
#define BNX2X_MC_ASSERT_BITS \
(GENERAL_ATTEN_OFFSET(TSTORM_FATAL_ASSERT_ATTENTION_BIT) | \
GENERAL_ATTEN_OFFSET(USTORM_FATAL_ASSERT_ATTENTION_BIT) | \
diff --git a/drivers/net/bnx2x_init.h b/drivers/net/bnx2x_init.h
index 370686e..bb0ee2d 100644
--- a/drivers/net/bnx2x_init.h
+++ b/drivers/net/bnx2x_init.h
@@ -87,10 +87,6 @@ union init_op {
#include "bnx2x_init_values.h"
static void bnx2x_reg_wr_ind(struct bnx2x *bp, u32 addr, u32 val);
-
-static void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr,
- u32 dst_addr, u32 len32);
-
static int bnx2x_gunzip(struct bnx2x *bp, u8 *zbuf, int len);
static void bnx2x_init_str_wr(struct bnx2x *bp, u32 addr, const u32 *data,
@@ -107,9 +103,6 @@ static void bnx2x_init_str_wr(struct bnx2x *bp, u32 addr, const u32 *data,
}
}
-#define INIT_MEM_WR(reg, data, reg_off, len) \
- bnx2x_init_str_wr(bp, reg + reg_off*4, data, len)
-
static void bnx2x_init_ind_wr(struct bnx2x *bp, u32 addr, const u32 *data,
u16 len)
{
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 70cba64..7b547f0 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -61,6 +61,7 @@
#include "bnx2x_reg.h"
#include "bnx2x_fw_defs.h"
#include "bnx2x_hsi.h"
+#include "bnx2x_link.h"
#include "bnx2x.h"
#include "bnx2x_init.h"
@@ -174,7 +175,7 @@ static void bnx2x_post_dmae(struct bnx2x *bp, struct dmae_command *dmae,
REG_WR(bp, dmae_reg_go_c[idx], 1);
}
-static void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr,
+void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr,
u32 dst_addr, u32 len32)
{
struct dmae_command *dmae = &bp->dmae;
@@ -236,8 +237,7 @@ static void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr,
}
}
-#ifdef BNX2X_DMAE_RD
-static void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32)
+void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32)
{
struct dmae_command *dmae = &bp->dmae;
int port = bp->port;
@@ -294,7 +294,6 @@ static void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32)
bp->slowpath->wb_data[2], bp->slowpath->wb_data[3]);
*/
}
-#endif
static int bnx2x_mc_assert(struct bnx2x *bp)
{
@@ -1135,67 +1134,19 @@ static irqreturn_t bnx2x_interrupt(int irq, void *dev_instance)
/* end of fast path */
-/* PHY/MAC */
+
+/* Link */
/*
* General service functions
*/
-static void bnx2x_leds_set(struct bnx2x *bp, unsigned int speed)
-{
- int port = bp->port;
-
- NIG_WR(NIG_REG_LED_MODE_P0 + port*4,
- ((bp->hw_config & SHARED_HW_CFG_LED_MODE_MASK) >>
- SHARED_HW_CFG_LED_MODE_SHIFT));
- NIG_WR(NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 + port*4, 0);
-
- /* Set blinking rate to ~15.9Hz */
- NIG_WR(NIG_REG_LED_CONTROL_BLINK_RATE_P0 + port*4,
- LED_BLINK_RATE_VAL);
- NIG_WR(NIG_REG_LED_CONTROL_BLINK_RATE_ENA_P0 + port*4, 1);
-
- /* On Ax chip versions for speeds less than 10G
- LED scheme is different */
- if ((CHIP_REV(bp) == CHIP_REV_Ax) && (speed < SPEED_10000)) {
- NIG_WR(NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 + port*4, 1);
- NIG_WR(NIG_REG_LED_CONTROL_TRAFFIC_P0 + port*4, 0);
- NIG_WR(NIG_REG_LED_CONTROL_BLINK_TRAFFIC_P0 + port*4, 1);
- }
-}
-
-static void bnx2x_leds_unset(struct bnx2x *bp)
-{
- int port = bp->port;
-
- NIG_WR(NIG_REG_LED_10G_P0 + port*4, 0);
- NIG_WR(NIG_REG_LED_MODE_P0 + port*4, SHARED_HW_CFG_LED_MAC1);
-}
-
-static u32 bnx2x_bits_en(struct bnx2x *bp, u32 reg, u32 bits)
-{
- u32 val = REG_RD(bp, reg);
-
- val |= bits;
- REG_WR(bp, reg, val);
- return val;
-}
-
-static u32 bnx2x_bits_dis(struct bnx2x *bp, u32 reg, u32 bits)
-{
- u32 val = REG_RD(bp, reg);
-
- val &= ~bits;
- REG_WR(bp, reg, val);
- return val;
-}
-
static int bnx2x_hw_lock(struct bnx2x *bp, u32 resource)
{
- u32 cnt;
u32 lock_status;
u32 resource_bit = (1 << resource);
- u8 func = bp->port;
+ u8 port = bp->port;
+ int cnt;
/* Validating that the resource is within range */
if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
@@ -1206,7 +1157,7 @@ static int bnx2x_hw_lock(struct bnx2x *bp, u32 resource)
}
/* Validating that the resource is not already taken */
- lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + func*8);
+ lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + port*8);
if (lock_status & resource_bit) {
DP(NETIF_MSG_HW, "lock_status 0x%x resource_bit 0x%x\n",
lock_status, resource_bit);
@@ -1216,9 +1167,9 @@ static int bnx2x_hw_lock(struct bnx2x *bp, u32 resource)
/* Try for 1 second every 5ms */
for (cnt = 0; cnt < 200; cnt++) {
/* Try to acquire the lock */
- REG_WR(bp, MISC_REG_DRIVER_CONTROL_1 + func*8 + 4,
+ REG_WR(bp, MISC_REG_DRIVER_CONTROL_1 + port*8 + 4,
resource_bit);
- lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + func*8);
+ lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + port*8);
if (lock_status & resource_bit)
return 0;
@@ -1232,7 +1183,7 @@ static int bnx2x_hw_unlock(struct bnx2x *bp, u32 resource)
{
u32 lock_status;
u32 resource_bit = (1 << resource);
- u8 func = bp->port;
+ u8 port = bp->port;
/* Validating that the resource is within range */
if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
@@ -1243,18 +1194,41 @@ static int bnx2x_hw_unlock(struct bnx2x *bp, u32 resource)
}
/* Validating that the resource is currently taken */
- lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + func*8);
+ lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + port*8);
if (!(lock_status & resource_bit)) {
DP(NETIF_MSG_HW, "lock_status 0x%x resource_bit 0x%x\n",
lock_status, resource_bit);
return -EFAULT;
}
- REG_WR(bp, MISC_REG_DRIVER_CONTROL_1 + func*8, resource_bit);
+ REG_WR(bp, MISC_REG_DRIVER_CONTROL_1 + port*8, resource_bit);
return 0;
}
-static int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode)
+/* HW Lock for shared dual port PHYs */
+static void bnx2x_phy_hw_lock(struct bnx2x *bp)
+{
+ u32 ext_phy_type = XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config);
+
+ mutex_lock(&bp->phy_mutex);
+
+ if ((ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072) ||
+ (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073))
+ bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+}
+
+static void bnx2x_phy_hw_unlock(struct bnx2x *bp)
+{
+ u32 ext_phy_type = XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config);
+
+ if ((ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072) ||
+ (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073))
+ bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+
+ mutex_unlock(&bp->phy_mutex);
+}
+
+int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode)
{
/* The GPIO should be swapped if swap register is set and active */
int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) &&
@@ -1353,1281 +1327,45 @@ static int bnx2x_set_spio(struct bnx2x *bp, int spio_num, u32 mode)
return 0;
}
-static int bnx2x_mdio22_write(struct bnx2x *bp, u32 reg, u32 val)
-{
- int port = bp->port;
- u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
- u32 tmp;
- int i, rc;
-
-/* DP(NETIF_MSG_HW, "phy_addr 0x%x reg 0x%x val 0x%08x\n",
- bp->phy_addr, reg, val); */
-
- if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) {
-
- tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
- tmp &= ~EMAC_MDIO_MODE_AUTO_POLL;
- EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, tmp);
- REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
- udelay(40);
- }
-
- tmp = ((bp->phy_addr << 21) | (reg << 16) |
- (val & EMAC_MDIO_COMM_DATA) |
- EMAC_MDIO_COMM_COMMAND_WRITE_22 |
- EMAC_MDIO_COMM_START_BUSY);
- EMAC_WR(EMAC_REG_EMAC_MDIO_COMM, tmp);
-
- for (i = 0; i < 50; i++) {
- udelay(10);
-
- tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM);
- if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) {
- udelay(5);
- break;
- }
- }
-
- if (tmp & EMAC_MDIO_COMM_START_BUSY) {
- BNX2X_ERR("write phy register failed\n");
-
- rc = -EBUSY;
- } else {
- rc = 0;
- }
-
- if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) {
-
- tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
- tmp |= EMAC_MDIO_MODE_AUTO_POLL;
- EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, tmp);
- }
-
- return rc;
-}
-
-static int bnx2x_mdio22_read(struct bnx2x *bp, u32 reg, u32 *ret_val)
-{
- int port = bp->port;
- u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
- u32 val;
- int i, rc;
-
- if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) {
-
- val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
- val &= ~EMAC_MDIO_MODE_AUTO_POLL;
- EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, val);
- REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
- udelay(40);
- }
-
- val = ((bp->phy_addr << 21) | (reg << 16) |
- EMAC_MDIO_COMM_COMMAND_READ_22 |
- EMAC_MDIO_COMM_START_BUSY);
- EMAC_WR(EMAC_REG_EMAC_MDIO_COMM, val);
-
- for (i = 0; i < 50; i++) {
- udelay(10);
-
- val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM);
- if (!(val & EMAC_MDIO_COMM_START_BUSY)) {
- val &= EMAC_MDIO_COMM_DATA;
- break;
- }
- }
-
- if (val & EMAC_MDIO_COMM_START_BUSY) {
- BNX2X_ERR("read phy register failed\n");
-
- *ret_val = 0x0;
- rc = -EBUSY;
- } else {
- *ret_val = val;
- rc = 0;
- }
-
- if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) {
-
- val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
- val |= EMAC_MDIO_MODE_AUTO_POLL;
- EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, val);
- }
-
-/* DP(NETIF_MSG_HW, "phy_addr 0x%x reg 0x%x ret_val 0x%08x\n",
- bp->phy_addr, reg, *ret_val); */
-
- return rc;
-}
-
-static int bnx2x_mdio45_ctrl_write(struct bnx2x *bp, u32 mdio_ctrl,
- u32 phy_addr, u32 reg, u32 addr, u32 val)
-{
- u32 tmp;
- int i, rc = 0;
-
- /* set clause 45 mode, slow down the MDIO clock to 2.5MHz
- * (a value of 49==0x31) and make sure that the AUTO poll is off
- */
- tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
- tmp &= ~(EMAC_MDIO_MODE_AUTO_POLL | EMAC_MDIO_MODE_CLOCK_CNT);
- tmp |= (EMAC_MDIO_MODE_CLAUSE_45 |
- (49 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT));
- REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, tmp);
- REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
- udelay(40);
-
- /* address */
- tmp = ((phy_addr << 21) | (reg << 16) | addr |
- EMAC_MDIO_COMM_COMMAND_ADDRESS |
- EMAC_MDIO_COMM_START_BUSY);
- REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp);
-
- for (i = 0; i < 50; i++) {
- udelay(10);
-
- tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
- if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) {
- udelay(5);
- break;
- }
- }
- if (tmp & EMAC_MDIO_COMM_START_BUSY) {
- BNX2X_ERR("write phy register failed\n");
-
- rc = -EBUSY;
-
- } else {
- /* data */
- tmp = ((phy_addr << 21) | (reg << 16) | val |
- EMAC_MDIO_COMM_COMMAND_WRITE_45 |
- EMAC_MDIO_COMM_START_BUSY);
- REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp);
-
- for (i = 0; i < 50; i++) {
- udelay(10);
-
- tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
- if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) {
- udelay(5);
- break;
- }
- }
-
- if (tmp & EMAC_MDIO_COMM_START_BUSY) {
- BNX2X_ERR("write phy register failed\n");
-
- rc = -EBUSY;
- }
- }
-
- /* unset clause 45 mode, set the MDIO clock to a faster value
- * (0x13 => 6.25Mhz) and restore the AUTO poll if needed
- */
- tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
- tmp &= ~(EMAC_MDIO_MODE_CLAUSE_45 | EMAC_MDIO_MODE_CLOCK_CNT);
- tmp |= (0x13 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT);
- if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG)
- tmp |= EMAC_MDIO_MODE_AUTO_POLL;
- REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, tmp);
-
- return rc;
-}
-
-static int bnx2x_mdio45_write(struct bnx2x *bp, u32 phy_addr, u32 reg,
- u32 addr, u32 val)
-{
- u32 emac_base = bp->port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
-
- return bnx2x_mdio45_ctrl_write(bp, emac_base, phy_addr,
- reg, addr, val);
-}
-
-static int bnx2x_mdio45_ctrl_read(struct bnx2x *bp, u32 mdio_ctrl,
- u32 phy_addr, u32 reg, u32 addr,
- u32 *ret_val)
-{
- u32 val;
- int i, rc = 0;
-
- /* set clause 45 mode, slow down the MDIO clock to 2.5MHz
- * (a value of 49==0x31) and make sure that the AUTO poll is off
- */
- val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
- val &= ~(EMAC_MDIO_MODE_AUTO_POLL | EMAC_MDIO_MODE_CLOCK_CNT);
- val |= (EMAC_MDIO_MODE_CLAUSE_45 |
- (49 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT));
- REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, val);
- REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
- udelay(40);
-
- /* address */
- val = ((phy_addr << 21) | (reg << 16) | addr |
- EMAC_MDIO_COMM_COMMAND_ADDRESS |
- EMAC_MDIO_COMM_START_BUSY);
- REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val);
-
- for (i = 0; i < 50; i++) {
- udelay(10);
-
- val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
- if (!(val & EMAC_MDIO_COMM_START_BUSY)) {
- udelay(5);
- break;
- }
- }
- if (val & EMAC_MDIO_COMM_START_BUSY) {
- BNX2X_ERR("read phy register failed\n");
-
- *ret_val = 0;
- rc = -EBUSY;
-
- } else {
- /* data */
- val = ((phy_addr << 21) | (reg << 16) |
- EMAC_MDIO_COMM_COMMAND_READ_45 |
- EMAC_MDIO_COMM_START_BUSY);
- REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val);
-
- for (i = 0; i < 50; i++) {
- udelay(10);
-
- val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
- if (!(val & EMAC_MDIO_COMM_START_BUSY)) {
- val &= EMAC_MDIO_COMM_DATA;
- break;
- }
- }
-
- if (val & EMAC_MDIO_COMM_START_BUSY) {
- BNX2X_ERR("read phy register failed\n");
-
- val = 0;
- rc = -EBUSY;
- }
-
- *ret_val = val;
- }
-
- /* unset clause 45 mode, set the MDIO clock to a faster value
- * (0x13 => 6.25Mhz) and restore the AUTO poll if needed
- */
- val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
- val &= ~(EMAC_MDIO_MODE_CLAUSE_45 | EMAC_MDIO_MODE_CLOCK_CNT);
- val |= (0x13 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT);
- if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG)
- val |= EMAC_MDIO_MODE_AUTO_POLL;
- REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, val);
-
- return rc;
-}
-
-static int bnx2x_mdio45_read(struct bnx2x *bp, u32 phy_addr, u32 reg,
- u32 addr, u32 *ret_val)
-{
- u32 emac_base = bp->port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
-
- return bnx2x_mdio45_ctrl_read(bp, emac_base, phy_addr,
- reg, addr, ret_val);
-}
-
-static int bnx2x_mdio45_vwrite(struct bnx2x *bp, u32 phy_addr, u32 reg,
- u32 addr, u32 val)
-{
- int i;
- u32 rd_val;
-
- might_sleep();
- for (i = 0; i < 10; i++) {
- bnx2x_mdio45_write(bp, phy_addr, reg, addr, val);
- msleep(5);
- bnx2x_mdio45_read(bp, phy_addr, reg, addr, &rd_val);
- /* if the read value is not the same as the value we wrote,
- we should write it again */
- if (rd_val == val)
- return 0;
- }
- BNX2X_ERR("MDIO write in CL45 failed\n");
- return -EBUSY;
-}
-
-/*
- * link management
- */
-
-static void bnx2x_pause_resolve(struct bnx2x *bp, u32 pause_result)
-{
- switch (pause_result) { /* ASYM P ASYM P */
- case 0xb: /* 1 0 1 1 */
- bp->flow_ctrl = FLOW_CTRL_TX;
- break;
-
- case 0xe: /* 1 1 1 0 */
- bp->flow_ctrl = FLOW_CTRL_RX;
- break;
-
- case 0x5: /* 0 1 0 1 */
- case 0x7: /* 0 1 1 1 */
- case 0xd: /* 1 1 0 1 */
- case 0xf: /* 1 1 1 1 */
- bp->flow_ctrl = FLOW_CTRL_BOTH;
- break;
-
- default:
- break;
- }
-}
-
-static u8 bnx2x_ext_phy_resove_fc(struct bnx2x *bp)
-{
- u32 ext_phy_addr;
- u32 ld_pause; /* local */
- u32 lp_pause; /* link partner */
- u32 an_complete; /* AN complete */
- u32 pause_result;
- u8 ret = 0;
-
- ext_phy_addr = ((bp->ext_phy_config &
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
-
- /* read twice */
- bnx2x_mdio45_read(bp, ext_phy_addr,
- EXT_PHY_KR_AUTO_NEG_DEVAD,
- EXT_PHY_KR_STATUS, &an_complete);
- bnx2x_mdio45_read(bp, ext_phy_addr,
- EXT_PHY_KR_AUTO_NEG_DEVAD,
- EXT_PHY_KR_STATUS, &an_complete);
-
- if (an_complete & EXT_PHY_KR_AUTO_NEG_COMPLETE) {
- ret = 1;
- bnx2x_mdio45_read(bp, ext_phy_addr,
- EXT_PHY_KR_AUTO_NEG_DEVAD,
- EXT_PHY_KR_AUTO_NEG_ADVERT, &ld_pause);
- bnx2x_mdio45_read(bp, ext_phy_addr,
- EXT_PHY_KR_AUTO_NEG_DEVAD,
- EXT_PHY_KR_LP_AUTO_NEG, &lp_pause);
- pause_result = (ld_pause &
- EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_MASK) >> 8;
- pause_result |= (lp_pause &
- EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_MASK) >> 10;
- DP(NETIF_MSG_LINK, "Ext PHY pause result 0x%x \n",
- pause_result);
- bnx2x_pause_resolve(bp, pause_result);
- }
- return ret;
-}
-
-static void bnx2x_flow_ctrl_resolve(struct bnx2x *bp, u32 gp_status)
-{
- u32 ld_pause; /* local driver */
- u32 lp_pause; /* link partner */
- u32 pause_result;
-
- bp->flow_ctrl = 0;
-
- /* resolve from gp_status in case of AN complete and not sgmii */
- if ((bp->req_autoneg & AUTONEG_FLOW_CTRL) &&
- (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) &&
- (!(bp->phy_flags & PHY_SGMII_FLAG)) &&
- (XGXS_EXT_PHY_TYPE(bp) == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT)) {
-
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_COMBO_IEEE0);
- bnx2x_mdio22_read(bp, MDIO_COMBO_IEEE0_AUTO_NEG_ADV,
- &ld_pause);
- bnx2x_mdio22_read(bp,
- MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1,
- &lp_pause);
- pause_result = (ld_pause &
- MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK)>>5;
- pause_result |= (lp_pause &
- MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK)>>7;
- DP(NETIF_MSG_LINK, "pause_result 0x%x\n", pause_result);
- bnx2x_pause_resolve(bp, pause_result);
- } else if (!(bp->req_autoneg & AUTONEG_FLOW_CTRL) ||
- !(bnx2x_ext_phy_resove_fc(bp))) {
- /* forced speed */
- if (bp->req_autoneg & AUTONEG_FLOW_CTRL) {
- switch (bp->req_flow_ctrl) {
- case FLOW_CTRL_AUTO:
- if (bp->dev->mtu <= 4500)
- bp->flow_ctrl = FLOW_CTRL_BOTH;
- else
- bp->flow_ctrl = FLOW_CTRL_TX;
- break;
-
- case FLOW_CTRL_TX:
- bp->flow_ctrl = FLOW_CTRL_TX;
- break;
-
- case FLOW_CTRL_RX:
- if (bp->dev->mtu <= 4500)
- bp->flow_ctrl = FLOW_CTRL_RX;
- break;
-
- case FLOW_CTRL_BOTH:
- if (bp->dev->mtu <= 4500)
- bp->flow_ctrl = FLOW_CTRL_BOTH;
- else
- bp->flow_ctrl = FLOW_CTRL_TX;
- break;
-
- case FLOW_CTRL_NONE:
- default:
- break;
- }
- } else { /* forced mode */
- switch (bp->req_flow_ctrl) {
- case FLOW_CTRL_AUTO:
- DP(NETIF_MSG_LINK, "req_flow_ctrl 0x%x while"
- " req_autoneg 0x%x\n",
- bp->req_flow_ctrl, bp->req_autoneg);
- break;
-
- case FLOW_CTRL_TX:
- case FLOW_CTRL_RX:
- case FLOW_CTRL_BOTH:
- bp->flow_ctrl = bp->req_flow_ctrl;
- break;
-
- case FLOW_CTRL_NONE:
- default:
- break;
- }
- }
- }
- DP(NETIF_MSG_LINK, "flow_ctrl 0x%x\n", bp->flow_ctrl);
-}
-
-static void bnx2x_link_settings_status(struct bnx2x *bp, u32 gp_status)
-{
- bp->link_status = 0;
-
- if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS) {
- DP(NETIF_MSG_LINK, "phy link up\n");
-
- bp->phy_link_up = 1;
- bp->link_status |= LINK_STATUS_LINK_UP;
-
- if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS)
- bp->duplex = DUPLEX_FULL;
- else
- bp->duplex = DUPLEX_HALF;
-
- bnx2x_flow_ctrl_resolve(bp, gp_status);
-
- switch (gp_status & GP_STATUS_SPEED_MASK) {
- case GP_STATUS_10M:
- bp->line_speed = SPEED_10;
- if (bp->duplex == DUPLEX_FULL)
- bp->link_status |= LINK_10TFD;
- else
- bp->link_status |= LINK_10THD;
- break;
-
- case GP_STATUS_100M:
- bp->line_speed = SPEED_100;
- if (bp->duplex == DUPLEX_FULL)
- bp->link_status |= LINK_100TXFD;
- else
- bp->link_status |= LINK_100TXHD;
- break;
-
- case GP_STATUS_1G:
- case GP_STATUS_1G_KX:
- bp->line_speed = SPEED_1000;
- if (bp->duplex == DUPLEX_FULL)
- bp->link_status |= LINK_1000TFD;
- else
- bp->link_status |= LINK_1000THD;
- break;
-
- case GP_STATUS_2_5G:
- bp->line_speed = SPEED_2500;
- if (bp->duplex == DUPLEX_FULL)
- bp->link_status |= LINK_2500TFD;
- else
- bp->link_status |= LINK_2500THD;
- break;
-
- case GP_STATUS_5G:
- case GP_STATUS_6G:
- BNX2X_ERR("link speed unsupported gp_status 0x%x\n",
- gp_status);
- break;
-
- case GP_STATUS_10G_KX4:
- case GP_STATUS_10G_HIG:
- case GP_STATUS_10G_CX4:
- bp->line_speed = SPEED_10000;
- bp->link_status |= LINK_10GTFD;
- break;
-
- case GP_STATUS_12G_HIG:
- bp->line_speed = SPEED_12000;
- bp->link_status |= LINK_12GTFD;
- break;
-
- case GP_STATUS_12_5G:
- bp->line_speed = SPEED_12500;
- bp->link_status |= LINK_12_5GTFD;
- break;
-
- case GP_STATUS_13G:
- bp->line_speed = SPEED_13000;
- bp->link_status |= LINK_13GTFD;
- break;
-
- case GP_STATUS_15G:
- bp->line_speed = SPEED_15000;
- bp->link_status |= LINK_15GTFD;
- break;
-
- case GP_STATUS_16G:
- bp->line_speed = SPEED_16000;
- bp->link_status |= LINK_16GTFD;
- break;
-
- default:
- BNX2X_ERR("link speed unsupported gp_status 0x%x\n",
- gp_status);
- break;
- }
-
- bp->link_status |= LINK_STATUS_SERDES_LINK;
-
- if (bp->req_autoneg & AUTONEG_SPEED) {
- bp->link_status |= LINK_STATUS_AUTO_NEGOTIATE_ENABLED;
-
- if (gp_status & MDIO_AN_CL73_OR_37_COMPLETE)
- bp->link_status |=
- LINK_STATUS_AUTO_NEGOTIATE_COMPLETE;
-
- if (bp->autoneg & AUTONEG_PARALLEL)
- bp->link_status |=
- LINK_STATUS_PARALLEL_DETECTION_USED;
- }
-
- if (bp->flow_ctrl & FLOW_CTRL_TX)
- bp->link_status |= LINK_STATUS_TX_FLOW_CONTROL_ENABLED;
-
- if (bp->flow_ctrl & FLOW_CTRL_RX)
- bp->link_status |= LINK_STATUS_RX_FLOW_CONTROL_ENABLED;
-
- } else { /* link_down */
- DP(NETIF_MSG_LINK, "phy link down\n");
-
- bp->phy_link_up = 0;
-
- bp->line_speed = 0;
- bp->duplex = DUPLEX_FULL;
- bp->flow_ctrl = 0;
- }
-
- DP(NETIF_MSG_LINK, "gp_status 0x%x phy_link_up %d\n"
- DP_LEVEL " line_speed %d duplex %d flow_ctrl 0x%x"
- " link_status 0x%x\n",
- gp_status, bp->phy_link_up, bp->line_speed, bp->duplex,
- bp->flow_ctrl, bp->link_status);
-}
-
-static void bnx2x_link_int_ack(struct bnx2x *bp, int is_10g)
-{
- int port = bp->port;
-
- /* first reset all status
- * we assume only one line will be change at a time */
- bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
- (NIG_STATUS_XGXS0_LINK10G |
- NIG_STATUS_XGXS0_LINK_STATUS |
- NIG_STATUS_SERDES0_LINK_STATUS));
- if (bp->phy_link_up) {
- if (is_10g) {
- /* Disable the 10G link interrupt
- * by writing 1 to the status register
- */
- DP(NETIF_MSG_LINK, "10G XGXS phy link up\n");
- bnx2x_bits_en(bp,
- NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
- NIG_STATUS_XGXS0_LINK10G);
-
- } else if (bp->phy_flags & PHY_XGXS_FLAG) {
- /* Disable the link interrupt
- * by writing 1 to the relevant lane
- * in the status register
- */
- DP(NETIF_MSG_LINK, "1G XGXS phy link up\n");
- bnx2x_bits_en(bp,
- NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
- ((1 << bp->ser_lane) <<
- NIG_STATUS_XGXS0_LINK_STATUS_SIZE));
-
- } else { /* SerDes */
- DP(NETIF_MSG_LINK, "SerDes phy link up\n");
- /* Disable the link interrupt
- * by writing 1 to the status register
- */
- bnx2x_bits_en(bp,
- NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
- NIG_STATUS_SERDES0_LINK_STATUS);
- }
-
- } else { /* link_down */
- }
-}
-
-static int bnx2x_ext_phy_is_link_up(struct bnx2x *bp)
+static void bnx2x_calc_fc_adv(struct bnx2x *bp)
{
- u32 ext_phy_type;
- u32 ext_phy_addr;
- u32 val1 = 0, val2;
- u32 rx_sd, pcs_status;
-
- if (bp->phy_flags & PHY_XGXS_FLAG) {
- ext_phy_addr = ((bp->ext_phy_config &
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
-
- ext_phy_type = XGXS_EXT_PHY_TYPE(bp);
- switch (ext_phy_type) {
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
- DP(NETIF_MSG_LINK, "XGXS Direct\n");
- val1 = 1;
- break;
-
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
- DP(NETIF_MSG_LINK, "XGXS 8705\n");
- bnx2x_mdio45_read(bp, ext_phy_addr,
- EXT_PHY_OPT_WIS_DEVAD,
- EXT_PHY_OPT_LASI_STATUS, &val1);
- DP(NETIF_MSG_LINK, "8705 LASI status 0x%x\n", val1);
-
- bnx2x_mdio45_read(bp, ext_phy_addr,
- EXT_PHY_OPT_WIS_DEVAD,
- EXT_PHY_OPT_LASI_STATUS, &val1);
- DP(NETIF_MSG_LINK, "8705 LASI status 0x%x\n", val1);
-
- bnx2x_mdio45_read(bp, ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_PMD_RX_SD, &rx_sd);
- DP(NETIF_MSG_LINK, "8705 rx_sd 0x%x\n", rx_sd);
- val1 = (rx_sd & 0x1);
- break;
-
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
- DP(NETIF_MSG_LINK, "XGXS 8706\n");
- bnx2x_mdio45_read(bp, ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_LASI_STATUS, &val1);
- DP(NETIF_MSG_LINK, "8706 LASI status 0x%x\n", val1);
-
- bnx2x_mdio45_read(bp, ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_LASI_STATUS, &val1);
- DP(NETIF_MSG_LINK, "8706 LASI status 0x%x\n", val1);
-
- bnx2x_mdio45_read(bp, ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_PMD_RX_SD, &rx_sd);
- bnx2x_mdio45_read(bp, ext_phy_addr,
- EXT_PHY_OPT_PCS_DEVAD,
- EXT_PHY_OPT_PCS_STATUS, &pcs_status);
- bnx2x_mdio45_read(bp, ext_phy_addr,
- EXT_PHY_AUTO_NEG_DEVAD,
- EXT_PHY_OPT_AN_LINK_STATUS, &val2);
-
- DP(NETIF_MSG_LINK, "8706 rx_sd 0x%x"
- " pcs_status 0x%x 1Gbps link_status 0x%x 0x%x\n",
- rx_sd, pcs_status, val2, (val2 & (1<<1)));
- /* link is up if both bit 0 of pmd_rx_sd and
- * bit 0 of pcs_status are set, or if the autoneg bit
- 1 is set
- */
- val1 = ((rx_sd & pcs_status & 0x1) || (val2 & (1<<1)));
- break;
-
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
- bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO);
-
- /* clear the interrupt LASI status register */
- bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
- ext_phy_addr,
- EXT_PHY_KR_PCS_DEVAD,
- EXT_PHY_KR_LASI_STATUS, &val2);
- bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
- ext_phy_addr,
- EXT_PHY_KR_PCS_DEVAD,
- EXT_PHY_KR_LASI_STATUS, &val1);
- DP(NETIF_MSG_LINK, "KR LASI status 0x%x->0x%x\n",
- val2, val1);
- /* Check the LASI */
- bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
- ext_phy_addr,
- EXT_PHY_KR_PMA_PMD_DEVAD,
- 0x9003, &val2);
- bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
- ext_phy_addr,
- EXT_PHY_KR_PMA_PMD_DEVAD,
- 0x9003, &val1);
- DP(NETIF_MSG_LINK, "KR 0x9003 0x%x->0x%x\n",
- val2, val1);
- /* Check the link status */
- bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
- ext_phy_addr,
- EXT_PHY_KR_PCS_DEVAD,
- EXT_PHY_KR_PCS_STATUS, &val2);
- DP(NETIF_MSG_LINK, "KR PCS status 0x%x\n", val2);
- /* Check the link status on 1.1.2 */
- bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
- ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_KR_STATUS, &val2);
- bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
- ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_KR_STATUS, &val1);
- DP(NETIF_MSG_LINK,
- "KR PMA status 0x%x->0x%x\n", val2, val1);
- val1 = ((val1 & 4) == 4);
- /* If 1G was requested assume the link is up */
- if (!(bp->req_autoneg & AUTONEG_SPEED) &&
- (bp->req_line_speed == SPEED_1000))
- val1 = 1;
- bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_8072_MDIO);
- break;
-
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
- bnx2x_mdio45_read(bp, ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_LASI_STATUS, &val2);
- bnx2x_mdio45_read(bp, ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_LASI_STATUS, &val1);
- DP(NETIF_MSG_LINK,
- "10G-base-T LASI status 0x%x->0x%x\n", val2, val1);
- bnx2x_mdio45_read(bp, ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_KR_STATUS, &val2);
- bnx2x_mdio45_read(bp, ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_KR_STATUS, &val1);
- DP(NETIF_MSG_LINK,
- "10G-base-T PMA status 0x%x->0x%x\n", val2, val1);
- val1 = ((val1 & 4) == 4);
- /* if link is up
- * print the AN outcome of the SFX7101 PHY
- */
- if (val1) {
- bnx2x_mdio45_read(bp, ext_phy_addr,
- EXT_PHY_KR_AUTO_NEG_DEVAD,
- 0x21, &val2);
- DP(NETIF_MSG_LINK,
- "SFX7101 AN status 0x%x->%s\n", val2,
- (val2 & (1<<14)) ? "Master" : "Slave");
- }
- break;
-
- default:
- DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n",
- bp->ext_phy_config);
- val1 = 0;
- break;
- }
-
- } else { /* SerDes */
- ext_phy_type = SERDES_EXT_PHY_TYPE(bp);
- switch (ext_phy_type) {
- case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT:
- DP(NETIF_MSG_LINK, "SerDes Direct\n");
- val1 = 1;
- break;
-
- case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482:
- DP(NETIF_MSG_LINK, "SerDes 5482\n");
- val1 = 1;
- break;
-
- default:
- DP(NETIF_MSG_LINK, "BAD SerDes ext_phy_config 0x%x\n",
- bp->ext_phy_config);
- val1 = 0;
- break;
- }
- }
-
- return val1;
-}
-
-static void bnx2x_bmac_enable(struct bnx2x *bp, int is_lb)
-{
- int port = bp->port;
- u32 bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM :
- NIG_REG_INGRESS_BMAC0_MEM;
- u32 wb_write[2];
- u32 val;
-
- DP(NETIF_MSG_LINK, "enabling BigMAC\n");
- /* reset and unreset the BigMac */
- REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
- (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
- msleep(5);
- REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
- (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
-
- /* enable access for bmac registers */
- NIG_WR(NIG_REG_BMAC0_REGS_OUT_EN + port*4, 0x1);
-
- /* XGXS control */
- wb_write[0] = 0x3c;
- wb_write[1] = 0;
- REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_BMAC_XGXS_CONTROL,
- wb_write, 2);
-
- /* tx MAC SA */
- wb_write[0] = ((bp->dev->dev_addr[2] << 24) |
- (bp->dev->dev_addr[3] << 16) |
- (bp->dev->dev_addr[4] << 8) |
- bp->dev->dev_addr[5]);
- wb_write[1] = ((bp->dev->dev_addr[0] << 8) |
- bp->dev->dev_addr[1]);
- REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_TX_SOURCE_ADDR,
- wb_write, 2);
-
- /* tx control */
- val = 0xc0;
- if (bp->flow_ctrl & FLOW_CTRL_TX)
- val |= 0x800000;
- wb_write[0] = val;
- wb_write[1] = 0;
- REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_TX_CONTROL, wb_write, 2);
-
- /* set tx mtu */
- wb_write[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD; /* -CRC */
- wb_write[1] = 0;
- REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_TX_MAX_SIZE, wb_write, 2);
-
- /* mac control */
- val = 0x3;
- if (is_lb) {
- val |= 0x4;
- DP(NETIF_MSG_LINK, "enable bmac loopback\n");
- }
- wb_write[0] = val;
- wb_write[1] = 0;
- REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL,
- wb_write, 2);
-
- /* rx control set to don't strip crc */
- val = 0x14;
- if (bp->flow_ctrl & FLOW_CTRL_RX)
- val |= 0x20;
- wb_write[0] = val;
- wb_write[1] = 0;
- REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_CONTROL, wb_write, 2);
-
- /* set rx mtu */
- wb_write[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD;
- wb_write[1] = 0;
- REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_MAX_SIZE, wb_write, 2);
-
- /* set cnt max size */
- wb_write[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD; /* -VLAN */
- wb_write[1] = 0;
- REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_CNT_MAX_SIZE,
- wb_write, 2);
-
- /* configure safc */
- wb_write[0] = 0x1000200;
- wb_write[1] = 0;
- REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_LLFC_MSG_FLDS,
- wb_write, 2);
-
- /* fix for emulation */
- if (CHIP_REV(bp) == CHIP_REV_EMUL) {
- wb_write[0] = 0xf000;
- wb_write[1] = 0;
- REG_WR_DMAE(bp,
- bmac_addr + BIGMAC_REGISTER_TX_PAUSE_THRESHOLD,
- wb_write, 2);
- }
-
- /* reset old bmac stats */
- memset(&bp->old_bmac, 0, sizeof(struct bmac_stats));
-
- NIG_WR(NIG_REG_XCM0_OUT_EN + port*4, 0x0);
-
- /* select XGXS */
- NIG_WR(NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 0x1);
- NIG_WR(NIG_REG_XGXS_LANE_SEL_P0 + port*4, 0x0);
-
- /* disable the NIG in/out to the emac */
- NIG_WR(NIG_REG_EMAC0_IN_EN + port*4, 0x0);
- NIG_WR(NIG_REG_EMAC0_PAUSE_OUT_EN + port*4, 0x0);
- NIG_WR(NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0x0);
-
- /* enable the NIG in/out to the bmac */
- NIG_WR(NIG_REG_EGRESS_EMAC0_PORT + port*4, 0x0);
-
- NIG_WR(NIG_REG_BMAC0_IN_EN + port*4, 0x1);
- val = 0;
- if (bp->flow_ctrl & FLOW_CTRL_TX)
- val = 1;
- NIG_WR(NIG_REG_BMAC0_PAUSE_OUT_EN + port*4, val);
- NIG_WR(NIG_REG_BMAC0_OUT_EN + port*4, 0x1);
-
- bp->phy_flags |= PHY_BMAC_FLAG;
-
- bp->stats_state = STATS_STATE_ENABLE;
-}
-
-static void bnx2x_bmac_rx_disable(struct bnx2x *bp)
-{
- int port = bp->port;
- u32 bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM :
- NIG_REG_INGRESS_BMAC0_MEM;
- u32 wb_write[2];
-
- /* Only if the bmac is out of reset */
- if (REG_RD(bp, MISC_REG_RESET_REG_2) &
- (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)) {
- /* Clear Rx Enable bit in BMAC_CONTROL register */
-#ifdef BNX2X_DMAE_RD
- bnx2x_read_dmae(bp, bmac_addr +
- BIGMAC_REGISTER_BMAC_CONTROL, 2);
- wb_write[0] = *bnx2x_sp(bp, wb_data[0]);
- wb_write[1] = *bnx2x_sp(bp, wb_data[1]);
-#else
- wb_write[0] = REG_RD(bp,
- bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL);
- wb_write[1] = REG_RD(bp,
- bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL + 4);
-#endif
- wb_write[0] &= ~BMAC_CONTROL_RX_ENABLE;
- REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL,
- wb_write, 2);
- msleep(1);
- }
-}
-
-static void bnx2x_emac_enable(struct bnx2x *bp)
-{
- int port = bp->port;
- u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
- u32 val;
- int timeout;
-
- DP(NETIF_MSG_LINK, "enabling EMAC\n");
- /* reset and unreset the emac core */
- REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
- (MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE << port));
- msleep(5);
- REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
- (MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE << port));
-
- /* enable emac and not bmac */
- NIG_WR(NIG_REG_EGRESS_EMAC0_PORT + port*4, 1);
-
- /* for paladium */
- if (CHIP_REV(bp) == CHIP_REV_EMUL) {
- /* Use lane 1 (of lanes 0-3) */
- NIG_WR(NIG_REG_XGXS_LANE_SEL_P0 + port*4, 1);
- NIG_WR(NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 1);
- }
- /* for fpga */
- else if (CHIP_REV(bp) == CHIP_REV_FPGA) {
- /* Use lane 1 (of lanes 0-3) */
- NIG_WR(NIG_REG_XGXS_LANE_SEL_P0 + port*4, 1);
- NIG_WR(NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 0);
- }
- /* ASIC */
- else {
- if (bp->phy_flags & PHY_XGXS_FLAG) {
- DP(NETIF_MSG_LINK, "XGXS\n");
- /* select the master lanes (out of 0-3) */
- NIG_WR(NIG_REG_XGXS_LANE_SEL_P0 + port*4,
- bp->ser_lane);
- /* select XGXS */
- NIG_WR(NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 1);
-
- } else { /* SerDes */
- DP(NETIF_MSG_LINK, "SerDes\n");
- /* select SerDes */
- NIG_WR(NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 0);
- }
- }
-
- /* enable emac */
- NIG_WR(NIG_REG_NIG_EMAC0_EN + port*4, 1);
-
- /* init emac - use read-modify-write */
- /* self clear reset */
- val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE);
- EMAC_WR(EMAC_REG_EMAC_MODE, (val | EMAC_MODE_RESET));
-
- timeout = 200;
- while (val & EMAC_MODE_RESET) {
- val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE);
- DP(NETIF_MSG_LINK, "EMAC reset reg is %u\n", val);
- if (!timeout) {
- BNX2X_ERR("EMAC timeout!\n");
- break;
- }
- timeout--;
- }
-
- /* reset tx part */
- EMAC_WR(EMAC_REG_EMAC_TX_MODE, EMAC_TX_MODE_RESET);
-
- timeout = 200;
- while (val & EMAC_TX_MODE_RESET) {
- val = REG_RD(bp, emac_base + EMAC_REG_EMAC_TX_MODE);
- DP(NETIF_MSG_LINK, "EMAC reset reg is %u\n", val);
- if (!timeout) {
- BNX2X_ERR("EMAC timeout!\n");
- break;
- }
- timeout--;
- }
-
- if (CHIP_REV_IS_SLOW(bp)) {
- /* config GMII mode */
- val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE);
- EMAC_WR(EMAC_REG_EMAC_MODE, (val | EMAC_MODE_PORT_GMII));
-
- } else { /* ASIC */
- /* pause enable/disable */
- bnx2x_bits_dis(bp, emac_base + EMAC_REG_EMAC_RX_MODE,
- EMAC_RX_MODE_FLOW_EN);
- if (bp->flow_ctrl & FLOW_CTRL_RX)
- bnx2x_bits_en(bp, emac_base + EMAC_REG_EMAC_RX_MODE,
- EMAC_RX_MODE_FLOW_EN);
-
- bnx2x_bits_dis(bp, emac_base + EMAC_REG_EMAC_TX_MODE,
- EMAC_TX_MODE_EXT_PAUSE_EN);
- if (bp->flow_ctrl & FLOW_CTRL_TX)
- bnx2x_bits_en(bp, emac_base + EMAC_REG_EMAC_TX_MODE,
- EMAC_TX_MODE_EXT_PAUSE_EN);
- }
-
- /* KEEP_VLAN_TAG, promiscuous */
- val = REG_RD(bp, emac_base + EMAC_REG_EMAC_RX_MODE);
- val |= EMAC_RX_MODE_KEEP_VLAN_TAG | EMAC_RX_MODE_PROMISCUOUS;
- EMAC_WR(EMAC_REG_EMAC_RX_MODE, val);
-
- /* identify magic packets */
- val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE);
- EMAC_WR(EMAC_REG_EMAC_MODE, (val | EMAC_MODE_MPKT));
-
- /* enable emac for jumbo packets */
- EMAC_WR(EMAC_REG_EMAC_RX_MTU_SIZE,
- (EMAC_RX_MTU_SIZE_JUMBO_ENA |
- (ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD))); /* -VLAN */
-
- /* strip CRC */
- NIG_WR(NIG_REG_NIG_INGRESS_EMAC0_NO_CRC + port*4, 0x1);
-
- val = ((bp->dev->dev_addr[0] << 8) |
- bp->dev->dev_addr[1]);
- EMAC_WR(EMAC_REG_EMAC_MAC_MATCH, val);
-
- val = ((bp->dev->dev_addr[2] << 24) |
- (bp->dev->dev_addr[3] << 16) |
- (bp->dev->dev_addr[4] << 8) |
- bp->dev->dev_addr[5]);
- EMAC_WR(EMAC_REG_EMAC_MAC_MATCH + 4, val);
-
- /* disable the NIG in/out to the bmac */
- NIG_WR(NIG_REG_BMAC0_IN_EN + port*4, 0x0);
- NIG_WR(NIG_REG_BMAC0_PAUSE_OUT_EN + port*4, 0x0);
- NIG_WR(NIG_REG_BMAC0_OUT_EN + port*4, 0x0);
-
- /* enable the NIG in/out to the emac */
- NIG_WR(NIG_REG_EMAC0_IN_EN + port*4, 0x1);
- val = 0;
- if (bp->flow_ctrl & FLOW_CTRL_TX)
- val = 1;
- NIG_WR(NIG_REG_EMAC0_PAUSE_OUT_EN + port*4, val);
- NIG_WR(NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0x1);
-
- if (CHIP_REV(bp) == CHIP_REV_FPGA) {
- /* take the BigMac out of reset */
- REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
- (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
-
- /* enable access for bmac registers */
- NIG_WR(NIG_REG_BMAC0_REGS_OUT_EN + port*4, 0x1);
- }
-
- bp->phy_flags |= PHY_EMAC_FLAG;
-
- bp->stats_state = STATS_STATE_ENABLE;
-}
-
-static void bnx2x_emac_program(struct bnx2x *bp)
-{
- u16 mode = 0;
- int port = bp->port;
-
- DP(NETIF_MSG_LINK, "setting link speed & duplex\n");
- bnx2x_bits_dis(bp, GRCBASE_EMAC0 + port*0x400 + EMAC_REG_EMAC_MODE,
- (EMAC_MODE_25G_MODE |
- EMAC_MODE_PORT_MII_10M |
- EMAC_MODE_HALF_DUPLEX));
- switch (bp->line_speed) {
- case SPEED_10:
- mode |= EMAC_MODE_PORT_MII_10M;
+ switch (bp->link_vars.ieee_fc) {
+ case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE:
+ bp->advertising &= ~(ADVERTISED_Asym_Pause |
+ ADVERTISED_Pause);
break;
-
- case SPEED_100:
- mode |= EMAC_MODE_PORT_MII;
+ case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH:
+ bp->advertising |= (ADVERTISED_Asym_Pause |
+ ADVERTISED_Pause);
break;
-
- case SPEED_1000:
- mode |= EMAC_MODE_PORT_GMII;
- break;
-
- case SPEED_2500:
- mode |= (EMAC_MODE_25G_MODE | EMAC_MODE_PORT_GMII);
+ case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC:
+ bp->advertising |= ADVERTISED_Asym_Pause;
break;
-
default:
- /* 10G not valid for EMAC */
- BNX2X_ERR("Invalid line_speed 0x%x\n", bp->line_speed);
+ bp->advertising &= ~(ADVERTISED_Asym_Pause |
+ ADVERTISED_Pause);
break;
}
-
- if (bp->duplex == DUPLEX_HALF)
- mode |= EMAC_MODE_HALF_DUPLEX;
- bnx2x_bits_en(bp, GRCBASE_EMAC0 + port*0x400 + EMAC_REG_EMAC_MODE,
- mode);
-
- bnx2x_leds_set(bp, bp->line_speed);
-}
-
-static void bnx2x_set_sgmii_tx_driver(struct bnx2x *bp)
-{
- u32 lp_up2;
- u32 tx_driver;
-
- /* read precomp */
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_OVER_1G);
- bnx2x_mdio22_read(bp, MDIO_OVER_1G_LP_UP2, &lp_up2);
-
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_TX0);
- bnx2x_mdio22_read(bp, MDIO_TX0_TX_DRIVER, &tx_driver);
-
- /* bits [10:7] at lp_up2, positioned at [15:12] */
- lp_up2 = (((lp_up2 & MDIO_OVER_1G_LP_UP2_PREEMPHASIS_MASK) >>
- MDIO_OVER_1G_LP_UP2_PREEMPHASIS_SHIFT) <<
- MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT);
-
- if ((lp_up2 != 0) &&
- (lp_up2 != (tx_driver & MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK))) {
- /* replace tx_driver bits [15:12] */
- tx_driver &= ~MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK;
- tx_driver |= lp_up2;
- bnx2x_mdio22_write(bp, MDIO_TX0_TX_DRIVER, tx_driver);
- }
-}
-
-static void bnx2x_pbf_update(struct bnx2x *bp)
-{
- int port = bp->port;
- u32 init_crd, crd;
- u32 count = 1000;
- u32 pause = 0;
-
- /* disable port */
- REG_WR(bp, PBF_REG_DISABLE_NEW_TASK_PROC_P0 + port*4, 0x1);
-
- /* wait for init credit */
- init_crd = REG_RD(bp, PBF_REG_P0_INIT_CRD + port*4);
- crd = REG_RD(bp, PBF_REG_P0_CREDIT + port*8);
- DP(NETIF_MSG_LINK, "init_crd 0x%x crd 0x%x\n", init_crd, crd);
-
- while ((init_crd != crd) && count) {
- msleep(5);
-
- crd = REG_RD(bp, PBF_REG_P0_CREDIT + port*8);
- count--;
- }
- crd = REG_RD(bp, PBF_REG_P0_CREDIT + port*8);
- if (init_crd != crd)
- BNX2X_ERR("BUG! init_crd 0x%x != crd 0x%x\n", init_crd, crd);
-
- if (bp->flow_ctrl & FLOW_CTRL_RX)
- pause = 1;
- REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, pause);
- if (pause) {
- /* update threshold */
- REG_WR(bp, PBF_REG_P0_ARB_THRSH + port*4, 0);
- /* update init credit */
- init_crd = 778; /* (800-18-4) */
-
- } else {
- u32 thresh = (ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD)/16;
-
- /* update threshold */
- REG_WR(bp, PBF_REG_P0_ARB_THRSH + port*4, thresh);
- /* update init credit */
- switch (bp->line_speed) {
- case SPEED_10:
- case SPEED_100:
- case SPEED_1000:
- init_crd = thresh + 55 - 22;
- break;
-
- case SPEED_2500:
- init_crd = thresh + 138 - 22;
- break;
-
- case SPEED_10000:
- init_crd = thresh + 553 - 22;
- break;
-
- default:
- BNX2X_ERR("Invalid line_speed 0x%x\n",
- bp->line_speed);
- break;
- }
- }
- REG_WR(bp, PBF_REG_P0_INIT_CRD + port*4, init_crd);
- DP(NETIF_MSG_LINK, "PBF updated to speed %d credit %d\n",
- bp->line_speed, init_crd);
-
- /* probe the credit changes */
- REG_WR(bp, PBF_REG_INIT_P0 + port*4, 0x1);
- msleep(5);
- REG_WR(bp, PBF_REG_INIT_P0 + port*4, 0x0);
-
- /* enable port */
- REG_WR(bp, PBF_REG_DISABLE_NEW_TASK_PROC_P0 + port*4, 0x0);
-}
-
-static void bnx2x_update_mng(struct bnx2x *bp)
-{
- if (!nomcp)
- SHMEM_WR(bp, port_mb[bp->port].link_status,
- bp->link_status);
}
static void bnx2x_link_report(struct bnx2x *bp)
{
- if (bp->link_up) {
- netif_carrier_on(bp->dev);
+ if (bp->link_vars.link_up) {
+ if (bp->state == BNX2X_STATE_OPEN)
+ netif_carrier_on(bp->dev);
printk(KERN_INFO PFX "%s NIC Link is Up, ", bp->dev->name);
- printk("%d Mbps ", bp->line_speed);
+ printk("%d Mbps ", bp->link_vars.line_speed);
- if (bp->duplex == DUPLEX_FULL)
+ if (bp->link_vars.duplex == DUPLEX_FULL)
printk("full duplex");
else
printk("half duplex");
- if (bp->flow_ctrl) {
- if (bp->flow_ctrl & FLOW_CTRL_RX) {
+ if (bp->link_vars.flow_ctrl != FLOW_CTRL_NONE) {
+ if (bp->link_vars.flow_ctrl & FLOW_CTRL_RX) {
printk(", receive ");
- if (bp->flow_ctrl & FLOW_CTRL_TX)
+ if (bp->link_vars.flow_ctrl & FLOW_CTRL_TX)
printk("& transmit ");
} else {
printk(", transmit ");
@@ -2638,1318 +1376,78 @@ static void bnx2x_link_report(struct bnx2x *bp)
} else { /* link_down */
netif_carrier_off(bp->dev);
- printk(KERN_INFO PFX "%s NIC Link is Down\n", bp->dev->name);
- }
-}
-
-static void bnx2x_link_up(struct bnx2x *bp)
-{
- int port = bp->port;
-
- /* PBF - link up */
- bnx2x_pbf_update(bp);
-
- /* disable drain */
- NIG_WR(NIG_REG_EGRESS_DRAIN0_MODE + port*4, 0);
-
- /* update shared memory */
- bnx2x_update_mng(bp);
-
- /* indicate link up */
- bnx2x_link_report(bp);
-}
-
-static void bnx2x_link_down(struct bnx2x *bp)
-{
- int port = bp->port;
-
- /* notify stats */
- if (bp->stats_state != STATS_STATE_DISABLE) {
- bp->stats_state = STATS_STATE_STOP;
- DP(BNX2X_MSG_STATS, "stats_state - STOP\n");
- }
-
- /* indicate no mac active */
- bp->phy_flags &= ~(PHY_BMAC_FLAG | PHY_EMAC_FLAG);
-
- /* update shared memory */
- bnx2x_update_mng(bp);
-
- /* activate nig drain */
- NIG_WR(NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1);
-
- /* reset BigMac */
- bnx2x_bmac_rx_disable(bp);
- REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
- (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
-
- /* indicate link down */
- bnx2x_link_report(bp);
-}
-
-static void bnx2x_init_mac_stats(struct bnx2x *bp);
-
-/* This function is called upon link interrupt */
-static void bnx2x_link_update(struct bnx2x *bp)
-{
- int port = bp->port;
- int i;
- u32 gp_status;
- int link_10g;
-
- DP(NETIF_MSG_LINK, "port %x, %s, int_status 0x%x,"
- " int_mask 0x%x, saved_mask 0x%x, MI_INT %x, SERDES_LINK %x,"
- " 10G %x, XGXS_LINK %x\n", port,
- (bp->phy_flags & PHY_XGXS_FLAG)? "XGXS":"SerDes",
- REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4),
- REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4), bp->nig_mask,
- REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port*0x18),
- REG_RD(bp, NIG_REG_SERDES0_STATUS_LINK_STATUS + port*0x3c),
- REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68),
- REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68)
- );
-
- might_sleep();
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_GP_STATUS);
- /* avoid fast toggling */
- for (i = 0; i < 10; i++) {
- msleep(10);
- bnx2x_mdio22_read(bp, MDIO_GP_STATUS_TOP_AN_STATUS1,
- &gp_status);
+ printk(KERN_ERR PFX "%s NIC Link is Down\n", bp->dev->name);
}
-
- bnx2x_link_settings_status(bp, gp_status);
-
- /* anything 10 and over uses the bmac */
- link_10g = ((bp->line_speed >= SPEED_10000) &&
- (bp->line_speed <= SPEED_16000));
-
- bnx2x_link_int_ack(bp, link_10g);
-
- /* link is up only if both local phy and external phy are up */
- bp->link_up = (bp->phy_link_up && bnx2x_ext_phy_is_link_up(bp));
- if (bp->link_up) {
- if (link_10g) {
- bnx2x_bmac_enable(bp, 0);
- bnx2x_leds_set(bp, SPEED_10000);
-
- } else {
- bnx2x_emac_enable(bp);
- bnx2x_emac_program(bp);
-
- /* AN complete? */
- if (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) {
- if (!(bp->phy_flags & PHY_SGMII_FLAG))
- bnx2x_set_sgmii_tx_driver(bp);
- }
- }
- bnx2x_link_up(bp);
-
- } else { /* link down */
- bnx2x_leds_unset(bp);
- bnx2x_link_down(bp);
- }
-
- bnx2x_init_mac_stats(bp);
}
-/*
- * Init service functions
- */
-
-static void bnx2x_set_aer_mmd(struct bnx2x *bp)
+static u8 bnx2x_initial_phy_init(struct bnx2x *bp)
{
- u16 offset = (bp->phy_flags & PHY_XGXS_FLAG) ?
- (bp->phy_addr + bp->ser_lane) : 0;
+ u8 rc;
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_AER_BLOCK);
- bnx2x_mdio22_write(bp, MDIO_AER_BLOCK_AER_REG, 0x3800 + offset);
-}
+ /* Initialize link parameters structure variables */
+ bp->link_params.mtu = bp->dev->mtu;
-static void bnx2x_set_master_ln(struct bnx2x *bp)
-{
- u32 new_master_ln;
-
- /* set the master_ln for AN */
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_XGXS_BLOCK2);
- bnx2x_mdio22_read(bp, MDIO_XGXS_BLOCK2_TEST_MODE_LANE,
- &new_master_ln);
- bnx2x_mdio22_write(bp, MDIO_XGXS_BLOCK2_TEST_MODE_LANE,
- (new_master_ln | bp->ser_lane));
-}
-
-static void bnx2x_reset_unicore(struct bnx2x *bp)
-{
- u32 mii_control;
- int i;
-
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_COMBO_IEEE0);
- bnx2x_mdio22_read(bp, MDIO_COMBO_IEEE0_MII_CONTROL, &mii_control);
- /* reset the unicore */
- bnx2x_mdio22_write(bp, MDIO_COMBO_IEEE0_MII_CONTROL,
- (mii_control | MDIO_COMBO_IEEO_MII_CONTROL_RESET));
-
- /* wait for the reset to self clear */
- for (i = 0; i < MDIO_ACCESS_TIMEOUT; i++) {
- udelay(5);
-
- /* the reset erased the previous bank value */
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_COMBO_IEEE0);
- bnx2x_mdio22_read(bp, MDIO_COMBO_IEEE0_MII_CONTROL,
- &mii_control);
-
- if (!(mii_control & MDIO_COMBO_IEEO_MII_CONTROL_RESET)) {
- udelay(5);
- return;
- }
- }
-
- BNX2X_ERR("BUG! %s (0x%x) is still in reset!\n",
- (bp->phy_flags & PHY_XGXS_FLAG)? "XGXS":"SerDes",
- bp->phy_addr);
-}
-
-static void bnx2x_set_swap_lanes(struct bnx2x *bp)
-{
- /* Each two bits represents a lane number:
- No swap is 0123 => 0x1b no need to enable the swap */
-
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_XGXS_BLOCK2);
- if (bp->rx_lane_swap != 0x1b) {
- bnx2x_mdio22_write(bp, MDIO_XGXS_BLOCK2_RX_LN_SWAP,
- (bp->rx_lane_swap |
- MDIO_XGXS_BLOCK2_RX_LN_SWAP_ENABLE |
- MDIO_XGXS_BLOCK2_RX_LN_SWAP_FORCE_ENABLE));
- } else {
- bnx2x_mdio22_write(bp, MDIO_XGXS_BLOCK2_RX_LN_SWAP, 0);
- }
-
- if (bp->tx_lane_swap != 0x1b) {
- bnx2x_mdio22_write(bp, MDIO_XGXS_BLOCK2_TX_LN_SWAP,
- (bp->tx_lane_swap |
- MDIO_XGXS_BLOCK2_TX_LN_SWAP_ENABLE));
- } else {
- bnx2x_mdio22_write(bp, MDIO_XGXS_BLOCK2_TX_LN_SWAP, 0);
- }
-}
-
-static void bnx2x_set_parallel_detection(struct bnx2x *bp)
-{
- u32 control2;
-
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_SERDES_DIGITAL);
- bnx2x_mdio22_read(bp, MDIO_SERDES_DIGITAL_A_1000X_CONTROL2,
- &control2);
-
- if (bp->autoneg & AUTONEG_PARALLEL) {
- control2 |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN;
- } else {
- control2 &= ~MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN;
- }
- bnx2x_mdio22_write(bp, MDIO_SERDES_DIGITAL_A_1000X_CONTROL2,
- control2);
-
- if (bp->phy_flags & PHY_XGXS_FLAG) {
- DP(NETIF_MSG_LINK, "XGXS\n");
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_10G_PARALLEL_DETECT);
-
- bnx2x_mdio22_write(bp,
- MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK,
- MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK_CNT);
-
- bnx2x_mdio22_read(bp,
- MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL,
- &control2);
-
- if (bp->autoneg & AUTONEG_PARALLEL) {
- control2 |=
- MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN;
- } else {
- control2 &=
- ~MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN;
- }
- bnx2x_mdio22_write(bp,
- MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL,
- control2);
-
- /* Disable parallel detection of HiG */
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_XGXS_BLOCK2);
- bnx2x_mdio22_write(bp, MDIO_XGXS_BLOCK2_UNICORE_MODE_10G,
- MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS |
- MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS);
- }
-}
-
-static void bnx2x_set_autoneg(struct bnx2x *bp)
-{
- u32 reg_val;
-
- /* CL37 Autoneg */
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_COMBO_IEEE0);
- bnx2x_mdio22_read(bp, MDIO_COMBO_IEEE0_MII_CONTROL, &reg_val);
- if ((bp->req_autoneg & AUTONEG_SPEED) &&
- (bp->autoneg & AUTONEG_CL37)) {
- /* CL37 Autoneg Enabled */
- reg_val |= MDIO_COMBO_IEEO_MII_CONTROL_AN_EN;
- } else {
- /* CL37 Autoneg Disabled */
- reg_val &= ~(MDIO_COMBO_IEEO_MII_CONTROL_AN_EN |
- MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN);
- }
- bnx2x_mdio22_write(bp, MDIO_COMBO_IEEE0_MII_CONTROL, reg_val);
-
- /* Enable/Disable Autodetection */
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_SERDES_DIGITAL);
- bnx2x_mdio22_read(bp, MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, &reg_val);
- reg_val &= ~MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_SIGNAL_DETECT_EN;
-
- if ((bp->req_autoneg & AUTONEG_SPEED) &&
- (bp->autoneg & AUTONEG_SGMII_FIBER_AUTODET)) {
- reg_val |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET;
- } else {
- reg_val &= ~MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET;
- }
- bnx2x_mdio22_write(bp, MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, reg_val);
-
- /* Enable TetonII and BAM autoneg */
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_BAM_NEXT_PAGE);
- bnx2x_mdio22_read(bp, MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL,
- &reg_val);
- if ((bp->req_autoneg & AUTONEG_SPEED) &&
- (bp->autoneg & AUTONEG_CL37) && (bp->autoneg & AUTONEG_BAM)) {
- /* Enable BAM aneg Mode and TetonII aneg Mode */
- reg_val |= (MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE |
- MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN);
- } else {
- /* TetonII and BAM Autoneg Disabled */
- reg_val &= ~(MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE |
- MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN);
- }
- bnx2x_mdio22_write(bp, MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL,
- reg_val);
-
- /* Enable Clause 73 Aneg */
- if ((bp->req_autoneg & AUTONEG_SPEED) &&
- (bp->autoneg & AUTONEG_CL73)) {
- /* Enable BAM Station Manager */
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_CL73_USERB0);
- bnx2x_mdio22_write(bp, MDIO_CL73_USERB0_CL73_BAM_CTRL1,
- (MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_EN |
- MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_STATION_MNGR_EN |
- MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_NP_AFTER_BP_EN));
-
- /* Merge CL73 and CL37 aneg resolution */
- bnx2x_mdio22_read(bp, MDIO_CL73_USERB0_CL73_BAM_CTRL3,
- &reg_val);
- bnx2x_mdio22_write(bp, MDIO_CL73_USERB0_CL73_BAM_CTRL3,
- (reg_val |
- MDIO_CL73_USERB0_CL73_BAM_CTRL3_USE_CL73_HCD_MR));
-
- /* Set the CL73 AN speed */
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_CL73_IEEEB1);
- bnx2x_mdio22_read(bp, MDIO_CL73_IEEEB1_AN_ADV2, &reg_val);
- /* In the SerDes we support only the 1G.
- In the XGXS we support the 10G KX4
- but we currently do not support the KR */
- if (bp->phy_flags & PHY_XGXS_FLAG) {
- DP(NETIF_MSG_LINK, "XGXS\n");
- /* 10G KX4 */
- reg_val |= MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4;
- } else {
- DP(NETIF_MSG_LINK, "SerDes\n");
- /* 1000M KX */
- reg_val |= MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX;
- }
- bnx2x_mdio22_write(bp, MDIO_CL73_IEEEB1_AN_ADV2, reg_val);
-
- /* CL73 Autoneg Enabled */
- reg_val = MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN;
- } else {
- /* CL73 Autoneg Disabled */
- reg_val = 0;
- }
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_CL73_IEEEB0);
- bnx2x_mdio22_write(bp, MDIO_CL73_IEEEB0_CL73_AN_CONTROL, reg_val);
-}
-
-/* program SerDes, forced speed */
-static void bnx2x_program_serdes(struct bnx2x *bp)
-{
- u32 reg_val;
-
- /* program duplex, disable autoneg */
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_COMBO_IEEE0);
- bnx2x_mdio22_read(bp, MDIO_COMBO_IEEE0_MII_CONTROL, &reg_val);
- reg_val &= ~(MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX |
- MDIO_COMBO_IEEO_MII_CONTROL_AN_EN);
- if (bp->req_duplex == DUPLEX_FULL)
- reg_val |= MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX;
- bnx2x_mdio22_write(bp, MDIO_COMBO_IEEE0_MII_CONTROL, reg_val);
-
- /* program speed
- - needed only if the speed is greater than 1G (2.5G or 10G) */
- if (bp->req_line_speed > SPEED_1000) {
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_SERDES_DIGITAL);
- bnx2x_mdio22_read(bp, MDIO_SERDES_DIGITAL_MISC1, &reg_val);
- /* clearing the speed value before setting the right speed */
- reg_val &= ~MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_MASK;
- reg_val |= (MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_156_25M |
- MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL);
- if (bp->req_line_speed == SPEED_10000)
- reg_val |=
- MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_CX4;
- bnx2x_mdio22_write(bp, MDIO_SERDES_DIGITAL_MISC1, reg_val);
- }
-}
-
-static void bnx2x_set_brcm_cl37_advertisment(struct bnx2x *bp)
-{
- u32 val = 0;
-
- /* configure the 48 bits for BAM AN */
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_OVER_1G);
-
- /* set extended capabilities */
- if (bp->advertising & ADVERTISED_2500baseX_Full)
- val |= MDIO_OVER_1G_UP1_2_5G;
- if (bp->advertising & ADVERTISED_10000baseT_Full)
- val |= MDIO_OVER_1G_UP1_10G;
- bnx2x_mdio22_write(bp, MDIO_OVER_1G_UP1, val);
-
- bnx2x_mdio22_write(bp, MDIO_OVER_1G_UP3, 0);
-}
-
-static void bnx2x_set_ieee_aneg_advertisment(struct bnx2x *bp)
-{
- u32 an_adv;
-
- /* for AN, we are always publishing full duplex */
- an_adv = MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX;
-
- /* resolve pause mode and advertisement
- * Please refer to Table 28B-3 of the 802.3ab-1999 spec */
- if (bp->req_autoneg & AUTONEG_FLOW_CTRL) {
- switch (bp->req_flow_ctrl) {
- case FLOW_CTRL_AUTO:
- if (bp->dev->mtu <= 4500) {
- an_adv |=
- MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
- bp->advertising |= (ADVERTISED_Pause |
- ADVERTISED_Asym_Pause);
- } else {
- an_adv |=
- MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
- bp->advertising |= ADVERTISED_Asym_Pause;
- }
- break;
-
- case FLOW_CTRL_TX:
- an_adv |=
- MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
- bp->advertising |= ADVERTISED_Asym_Pause;
- break;
-
- case FLOW_CTRL_RX:
- if (bp->dev->mtu <= 4500) {
- an_adv |=
- MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
- bp->advertising |= (ADVERTISED_Pause |
- ADVERTISED_Asym_Pause);
- } else {
- an_adv |=
- MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
- bp->advertising &= ~(ADVERTISED_Pause |
- ADVERTISED_Asym_Pause);
- }
- break;
-
- case FLOW_CTRL_BOTH:
- if (bp->dev->mtu <= 4500) {
- an_adv |=
- MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
- bp->advertising |= (ADVERTISED_Pause |
- ADVERTISED_Asym_Pause);
- } else {
- an_adv |=
- MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
- bp->advertising |= ADVERTISED_Asym_Pause;
- }
- break;
-
- case FLOW_CTRL_NONE:
- default:
- an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
- bp->advertising &= ~(ADVERTISED_Pause |
- ADVERTISED_Asym_Pause);
- break;
- }
- } else { /* forced mode */
- switch (bp->req_flow_ctrl) {
- case FLOW_CTRL_AUTO:
- DP(NETIF_MSG_LINK, "req_flow_ctrl 0x%x while"
- " req_autoneg 0x%x\n",
- bp->req_flow_ctrl, bp->req_autoneg);
- break;
-
- case FLOW_CTRL_TX:
- an_adv |=
- MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
- bp->advertising |= ADVERTISED_Asym_Pause;
- break;
-
- case FLOW_CTRL_RX:
- case FLOW_CTRL_BOTH:
- an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
- bp->advertising |= (ADVERTISED_Pause |
- ADVERTISED_Asym_Pause);
- break;
-
- case FLOW_CTRL_NONE:
- default:
- an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
- bp->advertising &= ~(ADVERTISED_Pause |
- ADVERTISED_Asym_Pause);
- break;
- }
- }
-
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_COMBO_IEEE0);
- bnx2x_mdio22_write(bp, MDIO_COMBO_IEEE0_AUTO_NEG_ADV, an_adv);
-}
-
-static void bnx2x_restart_autoneg(struct bnx2x *bp)
-{
- if (bp->autoneg & AUTONEG_CL73) {
- /* enable and restart clause 73 aneg */
- u32 an_ctrl;
-
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_CL73_IEEEB0);
- bnx2x_mdio22_read(bp, MDIO_CL73_IEEEB0_CL73_AN_CONTROL,
- &an_ctrl);
- bnx2x_mdio22_write(bp, MDIO_CL73_IEEEB0_CL73_AN_CONTROL,
- (an_ctrl |
- MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN |
- MDIO_CL73_IEEEB0_CL73_AN_CONTROL_RESTART_AN));
-
- } else {
- /* Enable and restart BAM/CL37 aneg */
- u32 mii_control;
-
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_COMBO_IEEE0);
- bnx2x_mdio22_read(bp, MDIO_COMBO_IEEE0_MII_CONTROL,
- &mii_control);
- bnx2x_mdio22_write(bp, MDIO_COMBO_IEEE0_MII_CONTROL,
- (mii_control |
- MDIO_COMBO_IEEO_MII_CONTROL_AN_EN |
- MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN));
- }
-}
-
-static void bnx2x_initialize_sgmii_process(struct bnx2x *bp)
-{
- u32 control1;
-
- /* in SGMII mode, the unicore is always slave */
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_SERDES_DIGITAL);
- bnx2x_mdio22_read(bp, MDIO_SERDES_DIGITAL_A_1000X_CONTROL1,
- &control1);
- control1 |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_INVERT_SIGNAL_DETECT;
- /* set sgmii mode (and not fiber) */
- control1 &= ~(MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_FIBER_MODE |
- MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET |
- MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_MSTR_MODE);
- bnx2x_mdio22_write(bp, MDIO_SERDES_DIGITAL_A_1000X_CONTROL1,
- control1);
-
- /* if forced speed */
- if (!(bp->req_autoneg & AUTONEG_SPEED)) {
- /* set speed, disable autoneg */
- u32 mii_control;
-
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_COMBO_IEEE0);
- bnx2x_mdio22_read(bp, MDIO_COMBO_IEEE0_MII_CONTROL,
- &mii_control);
- mii_control &= ~(MDIO_COMBO_IEEO_MII_CONTROL_AN_EN |
- MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK |
- MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX);
-
- switch (bp->req_line_speed) {
- case SPEED_100:
- mii_control |=
- MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_100;
- break;
- case SPEED_1000:
- mii_control |=
- MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_1000;
- break;
- case SPEED_10:
- /* there is nothing to set for 10M */
- break;
- default:
- /* invalid speed for SGMII */
- DP(NETIF_MSG_LINK, "Invalid req_line_speed 0x%x\n",
- bp->req_line_speed);
- break;
- }
-
- /* setting the full duplex */
- if (bp->req_duplex == DUPLEX_FULL)
- mii_control |=
- MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX;
- bnx2x_mdio22_write(bp, MDIO_COMBO_IEEE0_MII_CONTROL,
- mii_control);
-
- } else { /* AN mode */
- /* enable and restart AN */
- bnx2x_restart_autoneg(bp);
- }
-}
-
-static void bnx2x_link_int_enable(struct bnx2x *bp)
-{
- int port = bp->port;
- u32 ext_phy_type;
- u32 mask;
-
- /* setting the status to report on link up
- for either XGXS or SerDes */
- bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
- (NIG_STATUS_XGXS0_LINK10G |
- NIG_STATUS_XGXS0_LINK_STATUS |
- NIG_STATUS_SERDES0_LINK_STATUS));
-
- if (bp->phy_flags & PHY_XGXS_FLAG) {
- mask = (NIG_MASK_XGXS0_LINK10G |
- NIG_MASK_XGXS0_LINK_STATUS);
- DP(NETIF_MSG_LINK, "enabled XGXS interrupt\n");
- ext_phy_type = XGXS_EXT_PHY_TYPE(bp);
- if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) &&
- (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) &&
- (ext_phy_type !=
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN)) {
- mask |= NIG_MASK_MI_INT;
- DP(NETIF_MSG_LINK, "enabled external phy int\n");
- }
-
- } else { /* SerDes */
- mask = NIG_MASK_SERDES0_LINK_STATUS;
- DP(NETIF_MSG_LINK, "enabled SerDes interrupt\n");
- ext_phy_type = SERDES_EXT_PHY_TYPE(bp);
- if ((ext_phy_type !=
- PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT) &&
- (ext_phy_type !=
- PORT_HW_CFG_SERDES_EXT_PHY_TYPE_NOT_CONN)) {
- mask |= NIG_MASK_MI_INT;
- DP(NETIF_MSG_LINK, "enabled external phy int\n");
- }
- }
- bnx2x_bits_en(bp,
- NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
- mask);
- DP(NETIF_MSG_LINK, "port %x, %s, int_status 0x%x,"
- " int_mask 0x%x, MI_INT %x, SERDES_LINK %x,"
- " 10G %x, XGXS_LINK %x\n", port,
- (bp->phy_flags & PHY_XGXS_FLAG)? "XGXS":"SerDes",
- REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4),
- REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4),
- REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port*0x18),
- REG_RD(bp, NIG_REG_SERDES0_STATUS_LINK_STATUS + port*0x3c),
- REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68),
- REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68)
- );
-}
-
-static void bnx2x_bcm8072_external_rom_boot(struct bnx2x *bp)
-{
- u32 ext_phy_addr = ((bp->ext_phy_config &
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
- u32 fw_ver1, fw_ver2;
-
- /* Need to wait 200ms after reset */
- msleep(200);
- /* Boot port from external ROM
- * Set ser_boot_ctl bit in the MISC_CTRL1 register
- */
- bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
- EXT_PHY_KR_PMA_PMD_DEVAD,
- EXT_PHY_KR_MISC_CTRL1, 0x0001);
-
- /* Reset internal microprocessor */
- bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
- EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_GEN_CTRL,
- EXT_PHY_KR_ROM_RESET_INTERNAL_MP);
- /* set micro reset = 0 */
- bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
- EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_GEN_CTRL,
- EXT_PHY_KR_ROM_MICRO_RESET);
- /* Reset internal microprocessor */
- bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
- EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_GEN_CTRL,
- EXT_PHY_KR_ROM_RESET_INTERNAL_MP);
- /* wait for 100ms for code download via SPI port */
- msleep(100);
-
- /* Clear ser_boot_ctl bit */
- bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
- EXT_PHY_KR_PMA_PMD_DEVAD,
- EXT_PHY_KR_MISC_CTRL1, 0x0000);
- /* Wait 100ms */
- msleep(100);
-
- /* Print the PHY FW version */
- bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, ext_phy_addr,
- EXT_PHY_KR_PMA_PMD_DEVAD,
- 0xca19, &fw_ver1);
- bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, ext_phy_addr,
- EXT_PHY_KR_PMA_PMD_DEVAD,
- 0xca1a, &fw_ver2);
- DP(NETIF_MSG_LINK,
- "8072 FW version 0x%x:0x%x\n", fw_ver1, fw_ver2);
-}
-
-static void bnx2x_bcm8072_force_10G(struct bnx2x *bp)
-{
- u32 ext_phy_addr = ((bp->ext_phy_config &
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
-
- /* Force KR or KX */
- bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
- EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_CTRL,
- 0x2040);
- bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
- EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_CTRL2,
- 0x000b);
- bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
- EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_PMD_CTRL,
- 0x0000);
- bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
- EXT_PHY_KR_AUTO_NEG_DEVAD, EXT_PHY_KR_CTRL,
- 0x0000);
-}
-
-static void bnx2x_ext_phy_init(struct bnx2x *bp)
-{
- u32 ext_phy_type;
- u32 ext_phy_addr;
- u32 cnt;
- u32 ctrl;
- u32 val = 0;
-
- if (bp->phy_flags & PHY_XGXS_FLAG) {
- ext_phy_addr = ((bp->ext_phy_config &
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
-
- ext_phy_type = XGXS_EXT_PHY_TYPE(bp);
- /* Make sure that the soft reset is off (expect for the 8072:
- * due to the lock, it will be done inside the specific
- * handling)
- */
- if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) &&
- (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) &&
- (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN) &&
- (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072)) {
- /* Wait for soft reset to get cleared upto 1 sec */
- for (cnt = 0; cnt < 1000; cnt++) {
- bnx2x_mdio45_read(bp, ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_CNTL, &ctrl);
- if (!(ctrl & (1<<15)))
- break;
- msleep(1);
- }
- DP(NETIF_MSG_LINK,
- "control reg 0x%x (after %d ms)\n", ctrl, cnt);
- }
-
- switch (ext_phy_type) {
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
- DP(NETIF_MSG_LINK, "XGXS Direct\n");
- break;
-
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
- DP(NETIF_MSG_LINK, "XGXS 8705\n");
-
- bnx2x_mdio45_vwrite(bp, ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_PMD_MISC_CNTL,
- 0x8288);
- bnx2x_mdio45_vwrite(bp, ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_PHY_IDENTIFIER,
- 0x7fbf);
- bnx2x_mdio45_vwrite(bp, ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_CMU_PLL_BYPASS,
- 0x0100);
- bnx2x_mdio45_vwrite(bp, ext_phy_addr,
- EXT_PHY_OPT_WIS_DEVAD,
- EXT_PHY_OPT_LASI_CNTL, 0x1);
- break;
-
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
- DP(NETIF_MSG_LINK, "XGXS 8706\n");
-
- if (!(bp->req_autoneg & AUTONEG_SPEED)) {
- /* Force speed */
- if (bp->req_line_speed == SPEED_10000) {
- DP(NETIF_MSG_LINK,
- "XGXS 8706 force 10Gbps\n");
- bnx2x_mdio45_vwrite(bp, ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_PMD_DIGITAL_CNT,
- 0x400);
- } else {
- /* Force 1Gbps */
- DP(NETIF_MSG_LINK,
- "XGXS 8706 force 1Gbps\n");
-
- bnx2x_mdio45_vwrite(bp, ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_CNTL,
- 0x0040);
-
- bnx2x_mdio45_vwrite(bp, ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_CNTL2,
- 0x000D);
- }
+ bnx2x_phy_hw_lock(bp);
+ rc = bnx2x_phy_init(&bp->link_params, &bp->link_vars);
+ bnx2x_phy_hw_unlock(bp);
- /* Enable LASI */
- bnx2x_mdio45_vwrite(bp, ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_LASI_CNTL,
- 0x1);
- } else {
- /* AUTONEG */
- /* Allow CL37 through CL73 */
- DP(NETIF_MSG_LINK, "XGXS 8706 AutoNeg\n");
- bnx2x_mdio45_vwrite(bp, ext_phy_addr,
- EXT_PHY_AUTO_NEG_DEVAD,
- EXT_PHY_OPT_AN_CL37_CL73,
- 0x040c);
-
- /* Enable Full-Duplex advertisment on CL37 */
- bnx2x_mdio45_vwrite(bp, ext_phy_addr,
- EXT_PHY_AUTO_NEG_DEVAD,
- EXT_PHY_OPT_AN_CL37_FD,
- 0x0020);
- /* Enable CL37 AN */
- bnx2x_mdio45_vwrite(bp, ext_phy_addr,
- EXT_PHY_AUTO_NEG_DEVAD,
- EXT_PHY_OPT_AN_CL37_AN,
- 0x1000);
- /* Advertise 10G/1G support */
- if (bp->advertising &
- ADVERTISED_1000baseT_Full)
- val = (1<<5);
- if (bp->advertising &
- ADVERTISED_10000baseT_Full)
- val |= (1<<7);
-
- bnx2x_mdio45_vwrite(bp, ext_phy_addr,
- EXT_PHY_AUTO_NEG_DEVAD,
- EXT_PHY_OPT_AN_ADV, val);
- /* Enable LASI */
- bnx2x_mdio45_vwrite(bp, ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_LASI_CNTL,
- 0x1);
-
- /* Enable clause 73 AN */
- bnx2x_mdio45_write(bp, ext_phy_addr,
- EXT_PHY_AUTO_NEG_DEVAD,
- EXT_PHY_OPT_CNTL,
- 0x1200);
- }
- break;
-
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
- bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO);
- /* Wait for soft reset to get cleared upto 1 sec */
- for (cnt = 0; cnt < 1000; cnt++) {
- bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
- ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_CNTL, &ctrl);
- if (!(ctrl & (1<<15)))
- break;
- msleep(1);
- }
- DP(NETIF_MSG_LINK,
- "8072 control reg 0x%x (after %d ms)\n",
- ctrl, cnt);
-
- bnx2x_bcm8072_external_rom_boot(bp);
- DP(NETIF_MSG_LINK, "Finshed loading 8072 KR ROM\n");
-
- /* enable LASI */
- bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
- ext_phy_addr,
- EXT_PHY_KR_PMA_PMD_DEVAD,
- 0x9000, 0x0400);
- bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
- ext_phy_addr,
- EXT_PHY_KR_PMA_PMD_DEVAD,
- EXT_PHY_KR_LASI_CNTL, 0x0004);
-
- /* If this is forced speed, set to KR or KX
- * (all other are not supported)
- */
- if (!(bp->req_autoneg & AUTONEG_SPEED)) {
- if (bp->req_line_speed == SPEED_10000) {
- bnx2x_bcm8072_force_10G(bp);
- DP(NETIF_MSG_LINK,
- "Forced speed 10G on 8072\n");
- /* unlock */
- bnx2x_hw_unlock(bp,
- HW_LOCK_RESOURCE_8072_MDIO);
- break;
- } else
- val = (1<<5);
- } else {
-
- /* Advertise 10G/1G support */
- if (bp->advertising &
- ADVERTISED_1000baseT_Full)
- val = (1<<5);
- if (bp->advertising &
- ADVERTISED_10000baseT_Full)
- val |= (1<<7);
- }
- bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
- ext_phy_addr,
- EXT_PHY_KR_AUTO_NEG_DEVAD,
- 0x11, val);
- /* Add support for CL37 ( passive mode ) I */
- bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
- ext_phy_addr,
- EXT_PHY_KR_AUTO_NEG_DEVAD,
- 0x8370, 0x040c);
- /* Add support for CL37 ( passive mode ) II */
- bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
- ext_phy_addr,
- EXT_PHY_KR_AUTO_NEG_DEVAD,
- 0xffe4, 0x20);
- /* Add support for CL37 ( passive mode ) III */
- bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
- ext_phy_addr,
- EXT_PHY_KR_AUTO_NEG_DEVAD,
- 0xffe0, 0x1000);
- /* Restart autoneg */
- msleep(500);
- bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
- ext_phy_addr,
- EXT_PHY_KR_AUTO_NEG_DEVAD,
- EXT_PHY_KR_CTRL, 0x1200);
- DP(NETIF_MSG_LINK, "8072 Autoneg Restart: "
- "1G %ssupported 10G %ssupported\n",
- (val & (1<<5)) ? "" : "not ",
- (val & (1<<7)) ? "" : "not ");
-
- /* unlock */
- bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_8072_MDIO);
- break;
-
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
- DP(NETIF_MSG_LINK,
- "Setting the SFX7101 LASI indication\n");
- bnx2x_mdio45_vwrite(bp, ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_LASI_CNTL, 0x1);
- DP(NETIF_MSG_LINK,
- "Setting the SFX7101 LED to blink on traffic\n");
- bnx2x_mdio45_vwrite(bp, ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- 0xC007, (1<<3));
-
- /* read modify write pause advertizing */
- bnx2x_mdio45_read(bp, ext_phy_addr,
- EXT_PHY_KR_AUTO_NEG_DEVAD,
- EXT_PHY_KR_AUTO_NEG_ADVERT, &val);
- val &= ~EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_BOTH;
- /* Please refer to Table 28B-3 of 802.3ab-1999 spec. */
- if (bp->advertising & ADVERTISED_Pause)
- val |= EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE;
-
- if (bp->advertising & ADVERTISED_Asym_Pause) {
- val |=
- EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_ASYMMETRIC;
- }
- DP(NETIF_MSG_LINK, "SFX7101 AN advertize 0x%x\n", val);
- bnx2x_mdio45_vwrite(bp, ext_phy_addr,
- EXT_PHY_KR_AUTO_NEG_DEVAD,
- EXT_PHY_KR_AUTO_NEG_ADVERT, val);
- /* Restart autoneg */
- bnx2x_mdio45_read(bp, ext_phy_addr,
- EXT_PHY_KR_AUTO_NEG_DEVAD,
- EXT_PHY_KR_CTRL, &val);
- val |= 0x200;
- bnx2x_mdio45_write(bp, ext_phy_addr,
- EXT_PHY_KR_AUTO_NEG_DEVAD,
- EXT_PHY_KR_CTRL, val);
- break;
-
- default:
- BNX2X_ERR("BAD XGXS ext_phy_config 0x%x\n",
- bp->ext_phy_config);
- break;
- }
-
- } else { /* SerDes */
-/* ext_phy_addr = ((bp->ext_phy_config &
- PORT_HW_CFG_SERDES_EXT_PHY_ADDR_MASK) >>
- PORT_HW_CFG_SERDES_EXT_PHY_ADDR_SHIFT);
-*/
- ext_phy_type = SERDES_EXT_PHY_TYPE(bp);
- switch (ext_phy_type) {
- case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT:
- DP(NETIF_MSG_LINK, "SerDes Direct\n");
- break;
-
- case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482:
- DP(NETIF_MSG_LINK, "SerDes 5482\n");
- break;
-
- default:
- DP(NETIF_MSG_LINK, "BAD SerDes ext_phy_config 0x%x\n",
- bp->ext_phy_config);
- break;
- }
- }
-}
-
-static void bnx2x_ext_phy_reset(struct bnx2x *bp)
-{
- u32 ext_phy_type;
- u32 ext_phy_addr = ((bp->ext_phy_config &
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
- u32 board = (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK);
-
- /* The PHY reset is controled by GPIO 1
- * Give it 1ms of reset pulse
- */
- if ((board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1002G) &&
- (board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1003G)) {
- bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
- MISC_REGISTERS_GPIO_OUTPUT_LOW);
- msleep(1);
- bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
- MISC_REGISTERS_GPIO_OUTPUT_HIGH);
- }
-
- if (bp->phy_flags & PHY_XGXS_FLAG) {
- ext_phy_type = XGXS_EXT_PHY_TYPE(bp);
- switch (ext_phy_type) {
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
- DP(NETIF_MSG_LINK, "XGXS Direct\n");
- break;
-
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
- DP(NETIF_MSG_LINK, "XGXS 8705/8706\n");
- bnx2x_mdio45_write(bp, ext_phy_addr,
- EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_CNTL, 0xa040);
- break;
-
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
- DP(NETIF_MSG_LINK, "XGXS 8072\n");
- bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO);
- bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
- ext_phy_addr,
- EXT_PHY_KR_PMA_PMD_DEVAD,
- 0, 1<<15);
- bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_8072_MDIO);
- break;
-
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
- DP(NETIF_MSG_LINK, "XGXS SFX7101\n");
- break;
-
- default:
- DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n",
- bp->ext_phy_config);
- break;
- }
-
- } else { /* SerDes */
- ext_phy_type = SERDES_EXT_PHY_TYPE(bp);
- switch (ext_phy_type) {
- case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT:
- DP(NETIF_MSG_LINK, "SerDes Direct\n");
- break;
-
- case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482:
- DP(NETIF_MSG_LINK, "SerDes 5482\n");
- break;
+ if (bp->link_vars.link_up)
+ bnx2x_link_report(bp);
- default:
- DP(NETIF_MSG_LINK, "BAD SerDes ext_phy_config 0x%x\n",
- bp->ext_phy_config);
- break;
- }
- }
+ bnx2x_calc_fc_adv(bp);
+ return rc;
}
-static void bnx2x_link_initialize(struct bnx2x *bp)
+static void bnx2x_link_set(struct bnx2x *bp)
{
- int port = bp->port;
-
- /* disable attentions */
- bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
- (NIG_MASK_XGXS0_LINK_STATUS |
- NIG_MASK_XGXS0_LINK10G |
- NIG_MASK_SERDES0_LINK_STATUS |
- NIG_MASK_MI_INT));
-
- /* Activate the external PHY */
- bnx2x_ext_phy_reset(bp);
-
- bnx2x_set_aer_mmd(bp);
-
- if (bp->phy_flags & PHY_XGXS_FLAG)
- bnx2x_set_master_ln(bp);
-
- /* reset the SerDes and wait for reset bit return low */
- bnx2x_reset_unicore(bp);
-
- bnx2x_set_aer_mmd(bp);
-
- /* setting the masterLn_def again after the reset */
- if (bp->phy_flags & PHY_XGXS_FLAG) {
- bnx2x_set_master_ln(bp);
- bnx2x_set_swap_lanes(bp);
- }
-
- /* Set Parallel Detect */
- if (bp->req_autoneg & AUTONEG_SPEED)
- bnx2x_set_parallel_detection(bp);
-
- if (bp->phy_flags & PHY_XGXS_FLAG) {
- if (bp->req_line_speed &&
- bp->req_line_speed < SPEED_1000) {
- bp->phy_flags |= PHY_SGMII_FLAG;
- } else {
- bp->phy_flags &= ~PHY_SGMII_FLAG;
- }
- }
-
- if (!(bp->phy_flags & PHY_SGMII_FLAG)) {
- u16 bank, rx_eq;
-
- rx_eq = ((bp->serdes_config &
- PORT_HW_CFG_SERDES_RX_DRV_EQUALIZER_MASK) >>
- PORT_HW_CFG_SERDES_RX_DRV_EQUALIZER_SHIFT);
-
- DP(NETIF_MSG_LINK, "setting rx eq to %d\n", rx_eq);
- for (bank = MDIO_REG_BANK_RX0; bank <= MDIO_REG_BANK_RX_ALL;
- bank += (MDIO_REG_BANK_RX1 - MDIO_REG_BANK_RX0)) {
- MDIO_SET_REG_BANK(bp, bank);
- bnx2x_mdio22_write(bp, MDIO_RX0_RX_EQ_BOOST,
- ((rx_eq &
- MDIO_RX0_RX_EQ_BOOST_EQUALIZER_CTRL_MASK) |
- MDIO_RX0_RX_EQ_BOOST_OFFSET_CTRL));
- }
-
- /* forced speed requested? */
- if (!(bp->req_autoneg & AUTONEG_SPEED)) {
- DP(NETIF_MSG_LINK, "not SGMII, no AN\n");
-
- /* disable autoneg */
- bnx2x_set_autoneg(bp);
-
- /* program speed and duplex */
- bnx2x_program_serdes(bp);
-
- } else { /* AN_mode */
- DP(NETIF_MSG_LINK, "not SGMII, AN\n");
-
- /* AN enabled */
- bnx2x_set_brcm_cl37_advertisment(bp);
-
- /* program duplex & pause advertisement (for aneg) */
- bnx2x_set_ieee_aneg_advertisment(bp);
-
- /* enable autoneg */
- bnx2x_set_autoneg(bp);
-
- /* enable and restart AN */
- bnx2x_restart_autoneg(bp);
- }
-
- } else { /* SGMII mode */
- DP(NETIF_MSG_LINK, "SGMII\n");
-
- bnx2x_initialize_sgmii_process(bp);
- }
-
- /* init ext phy and enable link state int */
- bnx2x_ext_phy_init(bp);
+ bnx2x_phy_hw_lock(bp);
+ bnx2x_phy_init(&bp->link_params, &bp->link_vars);
+ bnx2x_phy_hw_unlock(bp);
- /* enable the interrupt */
- bnx2x_link_int_enable(bp);
+ bnx2x_calc_fc_adv(bp);
}
-static void bnx2x_phy_deassert(struct bnx2x *bp)
+static void bnx2x__link_reset(struct bnx2x *bp)
{
- int port = bp->port;
- u32 val;
-
- if (bp->phy_flags & PHY_XGXS_FLAG) {
- DP(NETIF_MSG_LINK, "XGXS\n");
- val = XGXS_RESET_BITS;
-
- } else { /* SerDes */
- DP(NETIF_MSG_LINK, "SerDes\n");
- val = SERDES_RESET_BITS;
- }
-
- val = val << (port*16);
-
- /* reset and unreset the SerDes/XGXS */
- REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR, val);
- msleep(5);
- REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_SET, val);
+ bnx2x_phy_hw_lock(bp);
+ bnx2x_link_reset(&bp->link_params, &bp->link_vars);
+ bnx2x_phy_hw_unlock(bp);
}
-static int bnx2x_phy_init(struct bnx2x *bp)
+static u8 bnx2x_link_test(struct bnx2x *bp)
{
- DP(NETIF_MSG_LINK, "started\n");
- if (CHIP_REV(bp) == CHIP_REV_FPGA) {
- bp->phy_flags |= PHY_EMAC_FLAG;
- bp->link_up = 1;
- bp->line_speed = SPEED_10000;
- bp->duplex = DUPLEX_FULL;
- NIG_WR(NIG_REG_EGRESS_DRAIN0_MODE + bp->port*4, 0);
- bnx2x_emac_enable(bp);
- bnx2x_link_report(bp);
- return 0;
+ u8 rc;
- } else if (CHIP_REV(bp) == CHIP_REV_EMUL) {
- bp->phy_flags |= PHY_BMAC_FLAG;
- bp->link_up = 1;
- bp->line_speed = SPEED_10000;
- bp->duplex = DUPLEX_FULL;
- NIG_WR(NIG_REG_EGRESS_DRAIN0_MODE + bp->port*4, 0);
- bnx2x_bmac_enable(bp, 0);
- bnx2x_link_report(bp);
- return 0;
+ bnx2x_phy_hw_lock(bp);
+ rc = bnx2x_test_link(&bp->link_params, &bp->link_vars);
+ bnx2x_phy_hw_unlock(bp);
- } else {
- bnx2x_phy_deassert(bp);
- bnx2x_link_initialize(bp);
- }
-
- return 0;
+ return rc;
}
-static void bnx2x_link_reset(struct bnx2x *bp)
+/* This function is called upon link interrupt */
+static void bnx2x_link_attn(struct bnx2x *bp)
{
- int port = bp->port;
- u32 board = (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK);
-
- /* update shared memory */
- bp->link_status = 0;
- bnx2x_update_mng(bp);
-
- /* disable attentions */
- bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
- (NIG_MASK_XGXS0_LINK_STATUS |
- NIG_MASK_XGXS0_LINK10G |
- NIG_MASK_SERDES0_LINK_STATUS |
- NIG_MASK_MI_INT));
-
- /* activate nig drain */
- NIG_WR(NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1);
-
- /* disable nig egress interface */
- NIG_WR(NIG_REG_BMAC0_OUT_EN + port*4, 0);
- NIG_WR(NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0);
-
- /* Stop BigMac rx */
- bnx2x_bmac_rx_disable(bp);
-
- /* disable emac */
- NIG_WR(NIG_REG_NIG_EMAC0_EN + port*4, 0);
-
- msleep(10);
+ bnx2x_phy_hw_lock(bp);
+ bnx2x_link_update(&bp->link_params, &bp->link_vars);
+ bnx2x_phy_hw_unlock(bp);
- /* The PHY reset is controled by GPIO 1
- * Hold it as output low
- */
- if ((board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1002G) &&
- (board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1003G)) {
- bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
- MISC_REGISTERS_GPIO_OUTPUT_LOW);
- DP(NETIF_MSG_LINK, "reset external PHY\n");
- }
-
- /* reset the SerDes/XGXS */
- REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR,
- (0x1ff << (port*16)));
-
- /* reset BigMac */
- REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
- (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
-
- /* disable nig ingress interface */
- NIG_WR(NIG_REG_BMAC0_IN_EN + port*4, 0);
- NIG_WR(NIG_REG_EMAC0_IN_EN + port*4, 0);
-
- /* set link down */
- bp->link_up = 0;
+ /* indicate link status */
+ bnx2x_link_report(bp);
}
-#ifdef BNX2X_XGXS_LB
-static void bnx2x_set_xgxs_loopback(struct bnx2x *bp, int is_10g)
+static void bnx2x__link_status_update(struct bnx2x *bp)
{
- int port = bp->port;
-
- if (is_10g) {
- u32 md_devad;
-
- DP(NETIF_MSG_LINK, "XGXS 10G loopback enable\n");
-
- /* change the uni_phy_addr in the nig */
- REG_RD(bp, (NIG_REG_XGXS0_CTRL_MD_DEVAD + port*0x18),
- &md_devad);
- NIG_WR(NIG_REG_XGXS0_CTRL_MD_DEVAD + port*0x18, 0x5);
-
- /* change the aer mmd */
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_AER_BLOCK);
- bnx2x_mdio22_write(bp, MDIO_AER_BLOCK_AER_REG, 0x2800);
-
- /* config combo IEEE0 control reg for loopback */
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_CL73_IEEEB0);
- bnx2x_mdio22_write(bp, MDIO_CL73_IEEEB0_CL73_AN_CONTROL,
- 0x6041);
-
- /* set aer mmd back */
- bnx2x_set_aer_mmd(bp);
-
- /* and md_devad */
- NIG_WR(NIG_REG_XGXS0_CTRL_MD_DEVAD + port*0x18, md_devad);
-
- } else {
- u32 mii_control;
+ if (bp->state != BNX2X_STATE_OPEN)
+ return;
- DP(NETIF_MSG_LINK, "XGXS 1G loopback enable\n");
+ bnx2x_link_status_update(&bp->link_params, &bp->link_vars);
- MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_COMBO_IEEE0);
- bnx2x_mdio22_read(bp, MDIO_COMBO_IEEE0_MII_CONTROL,
- &mii_control);
- bnx2x_mdio22_write(bp, MDIO_COMBO_IEEE0_MII_CONTROL,
- (mii_control |
- MDIO_COMBO_IEEO_MII_CONTROL_LOOPBACK));
- }
+ /* indicate link status */
+ bnx2x_link_report(bp);
}
-#endif
-/* end of PHY/MAC */
+/* end of Link */
/* slow path */
@@ -4113,7 +1611,7 @@ static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted)
bp->nig_mask = REG_RD(bp, nig_int_mask_addr);
REG_WR(bp, nig_int_mask_addr, 0);
- bnx2x_link_update(bp);
+ bnx2x_link_attn(bp);
/* handle unicore attn? */
}
@@ -4196,14 +1694,14 @@ static inline void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn)
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
MISC_REGISTERS_GPIO_OUTPUT_LOW);
/* mark the failure */
- bp->ext_phy_config &=
+ bp->link_params.ext_phy_config &=
~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK;
- bp->ext_phy_config |=
+ bp->link_params.ext_phy_config |=
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE;
SHMEM_WR(bp,
dev_info.port_hw_config[port].
external_phy_config,
- bp->ext_phy_config);
+ bp->link_params.ext_phy_config);
/* log the failure */
printk(KERN_ERR PFX "Fan Failure on Network"
" Controller %s has caused the driver to"
@@ -4580,7 +2078,7 @@ static void bnx2x_init_mac_stats(struct bnx2x *bp)
#endif
(port ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0));
- if (bp->link_up)
+ if (bp->link_vars.link_up)
opcode |= (DMAE_CMD_C_DST_GRC | DMAE_CMD_C_ENABLE);
dmae = bnx2x_sp(bp, dmae[bp->executer_idx++]);
@@ -4593,7 +2091,7 @@ static void bnx2x_init_mac_stats(struct bnx2x *bp)
dmae->dst_addr_hi = 0;
dmae->len = (offsetof(struct bnx2x_eth_stats, mac_stx_end) -
sizeof(u32)) >> 2;
- if (bp->link_up) {
+ if (bp->link_vars.link_up) {
dmae->comp_addr_lo = dmae_reg_go_c[loader_idx] >> 2;
dmae->comp_addr_hi = 0;
dmae->comp_val = 1;
@@ -4604,7 +2102,7 @@ static void bnx2x_init_mac_stats(struct bnx2x *bp)
}
}
- if (!bp->link_up) {
+ if (!bp->link_vars.link_up) {
/* no need to collect statistics in link down */
return;
}
@@ -4619,7 +2117,7 @@ static void bnx2x_init_mac_stats(struct bnx2x *bp)
#endif
(port ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0));
- if (bp->phy_flags & PHY_BMAC_FLAG) {
+ if (bp->link_vars.mac_type == MAC_TYPE_BMAC) {
mac_addr = (port ? NIG_REG_INGRESS_BMAC1_MEM :
NIG_REG_INGRESS_BMAC0_MEM);
@@ -4656,7 +2154,7 @@ static void bnx2x_init_mac_stats(struct bnx2x *bp)
dmae->comp_addr_hi = 0;
dmae->comp_val = 1;
- } else if (bp->phy_flags & PHY_EMAC_FLAG) {
+ } else if (bp->link_vars.mac_type == MAC_TYPE_EMAC) {
mac_addr = (port ? GRCBASE_EMAC1 : GRCBASE_EMAC0);
@@ -5099,10 +2597,10 @@ static void bnx2x_update_stats(struct bnx2x *bp)
if (!bnx2x_update_storm_stats(bp)) {
- if (bp->phy_flags & PHY_BMAC_FLAG) {
+ if (bp->link_vars.mac_type == MAC_TYPE_BMAC) {
bnx2x_update_bmac_stats(bp);
- } else if (bp->phy_flags & PHY_EMAC_FLAG) {
+ } else if (bp->link_vars.mac_type == MAC_TYPE_EMAC) {
bnx2x_update_emac_stats(bp);
} else { /* unreached */
@@ -6568,7 +4066,7 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode)
break;
}
- bnx2x_link_reset(bp);
+ bnx2x__link_reset(bp);
/* Reset PCIE errors for debug */
REG_WR(bp, 0x2114, 0xffffffff);
@@ -7210,7 +4708,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int req_irq)
bnx2x_set_mac_addr(bp);
- bnx2x_phy_init(bp);
+ bnx2x_initial_phy_init(bp);
/* Start fast path */
if (req_irq) { /* IRQ is only requested from bnx2x_open */
@@ -7435,7 +4933,7 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int free_irq)
}
unload_error:
- bnx2x_link_reset(bp);
+ bnx2x__link_reset(bp);
if (!nomcp)
reset_code = bnx2x_fw_command(bp, reset_code);
@@ -7477,13 +4975,12 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg)
int port = bp->port;
u32 ext_phy_type;
- bp->phy_flags = 0;
-
switch (switch_cfg) {
case SWITCH_CFG_1G:
BNX2X_DEV_INFO("switch_cfg 0x%x (1G)\n", switch_cfg);
- ext_phy_type = SERDES_EXT_PHY_TYPE(bp);
+ ext_phy_type =
+ SERDES_EXT_PHY_TYPE(bp->link_params.ext_phy_config);
switch (ext_phy_type) {
case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT:
BNX2X_DEV_INFO("ext_phy_type 0x%x (Direct)\n",
@@ -7505,8 +5002,6 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg)
BNX2X_DEV_INFO("ext_phy_type 0x%x (5482)\n",
ext_phy_type);
- bp->phy_flags |= PHY_SGMII_FLAG;
-
bp->supported |= (SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
@@ -7521,7 +5016,7 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg)
default:
BNX2X_ERR("NVRAM config error. "
"BAD SerDes ext_phy_config 0x%x\n",
- bp->ext_phy_config);
+ bp->link_params.ext_phy_config);
return;
}
@@ -7533,9 +5028,8 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg)
case SWITCH_CFG_10G:
BNX2X_DEV_INFO("switch_cfg 0x%x (10G)\n", switch_cfg);
- bp->phy_flags |= PHY_XGXS_FLAG;
-
- ext_phy_type = XGXS_EXT_PHY_TYPE(bp);
+ ext_phy_type =
+ XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config);
switch (ext_phy_type) {
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
BNX2X_DEV_INFO("ext_phy_type 0x%x (Direct)\n",
@@ -7588,6 +5082,19 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg)
SUPPORTED_Asym_Pause);
break;
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
+ BNX2X_DEV_INFO("ext_phy_type 0x%x (8073)\n",
+ ext_phy_type);
+
+ bp->supported |= (SUPPORTED_10000baseT_Full |
+ SUPPORTED_2500baseX_Full |
+ SUPPORTED_1000baseT_Full |
+ SUPPORTED_FIBRE |
+ SUPPORTED_Autoneg |
+ SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause);
+ break;
+
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
BNX2X_DEV_INFO("ext_phy_type 0x%x (SFX7101)\n",
ext_phy_type);
@@ -7599,10 +5106,15 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg)
SUPPORTED_Asym_Pause);
break;
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE:
+ BNX2X_ERR("XGXS PHY Failure detected 0x%x\n",
+ bp->link_params.ext_phy_config);
+ break;
+
default:
BNX2X_ERR("NVRAM config error. "
"BAD XGXS ext_phy_config 0x%x\n",
- bp->ext_phy_config);
+ bp->link_params.ext_phy_config);
return;
}
@@ -7610,17 +5122,6 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg)
port*0x18);
BNX2X_DEV_INFO("phy_addr 0x%x\n", bp->phy_addr);
- bp->ser_lane = ((bp->lane_config &
- PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >>
- PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT);
- bp->rx_lane_swap = ((bp->lane_config &
- PORT_HW_CFG_LANE_SWAP_CFG_RX_MASK) >>
- PORT_HW_CFG_LANE_SWAP_CFG_RX_SHIFT);
- bp->tx_lane_swap = ((bp->lane_config &
- PORT_HW_CFG_LANE_SWAP_CFG_TX_MASK) >>
- PORT_HW_CFG_LANE_SWAP_CFG_TX_SHIFT);
- BNX2X_DEV_INFO("rx_lane_swap 0x%x tx_lane_swap 0x%x\n",
- bp->rx_lane_swap, bp->tx_lane_swap);
break;
default:
@@ -7628,32 +5129,36 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg)
bp->link_config);
return;
}
+ bp->link_params.phy_addr = bp->phy_addr;
/* mask what we support according to speed_cap_mask */
- if (!(bp->speed_cap_mask &
- PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF))
+ if (!(bp->link_params.speed_cap_mask &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF))
bp->supported &= ~SUPPORTED_10baseT_Half;
- if (!(bp->speed_cap_mask &
- PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL))
+ if (!(bp->link_params.speed_cap_mask &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL))
bp->supported &= ~SUPPORTED_10baseT_Full;
- if (!(bp->speed_cap_mask &
- PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF))
+ if (!(bp->link_params.speed_cap_mask &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF))
bp->supported &= ~SUPPORTED_100baseT_Half;
- if (!(bp->speed_cap_mask &
- PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL))
+ if (!(bp->link_params.speed_cap_mask &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL))
bp->supported &= ~SUPPORTED_100baseT_Full;
- if (!(bp->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_1G))
+ if (!(bp->link_params.speed_cap_mask &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_1G))
bp->supported &= ~(SUPPORTED_1000baseT_Half |
SUPPORTED_1000baseT_Full);
- if (!(bp->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G))
+ if (!(bp->link_params.speed_cap_mask &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G))
bp->supported &= ~SUPPORTED_2500baseX_Full;
- if (!(bp->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G))
+ if (!(bp->link_params.speed_cap_mask &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_10G))
bp->supported &= ~SUPPORTED_10000baseT_Full;
BNX2X_DEV_INFO("supported 0x%x\n", bp->supported);
@@ -7661,20 +5166,23 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg)
static void bnx2x_link_settings_requested(struct bnx2x *bp)
{
- bp->req_autoneg = 0;
- bp->req_duplex = DUPLEX_FULL;
+ bp->link_params.req_duplex = DUPLEX_FULL;
switch (bp->link_config & PORT_FEATURE_LINK_SPEED_MASK) {
case PORT_FEATURE_LINK_SPEED_AUTO:
if (bp->supported & SUPPORTED_Autoneg) {
- bp->req_autoneg |= AUTONEG_SPEED;
- bp->req_line_speed = 0;
+ bp->link_params.req_line_speed = SPEED_AUTO_NEG;
bp->advertising = bp->supported;
} else {
- if (XGXS_EXT_PHY_TYPE(bp) ==
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) {
+ u32 ext_phy_type =
+ XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config);
+
+ if ((ext_phy_type ==
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) ||
+ (ext_phy_type ==
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706)) {
/* force 10G, no AN */
- bp->req_line_speed = SPEED_10000;
+ bp->link_params.req_line_speed = SPEED_10000;
bp->advertising =
(ADVERTISED_10000baseT_Full |
ADVERTISED_FIBRE);
@@ -7690,86 +5198,92 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
case PORT_FEATURE_LINK_SPEED_10M_FULL:
if (bp->supported & SUPPORTED_10baseT_Full) {
- bp->req_line_speed = SPEED_10;
+ bp->link_params.req_line_speed = SPEED_10;
bp->advertising = (ADVERTISED_10baseT_Full |
ADVERTISED_TP);
} else {
BNX2X_ERR("NVRAM config error. "
"Invalid link_config 0x%x"
" speed_cap_mask 0x%x\n",
- bp->link_config, bp->speed_cap_mask);
+ bp->link_config,
+ bp->link_params.speed_cap_mask);
return;
}
break;
case PORT_FEATURE_LINK_SPEED_10M_HALF:
if (bp->supported & SUPPORTED_10baseT_Half) {
- bp->req_line_speed = SPEED_10;
- bp->req_duplex = DUPLEX_HALF;
+ bp->link_params.req_line_speed = SPEED_10;
+ bp->link_params.req_duplex = DUPLEX_HALF;
bp->advertising = (ADVERTISED_10baseT_Half |
ADVERTISED_TP);
} else {
BNX2X_ERR("NVRAM config error. "
"Invalid link_config 0x%x"
" speed_cap_mask 0x%x\n",
- bp->link_config, bp->speed_cap_mask);
+ bp->link_config,
+ bp->link_params.speed_cap_mask);
return;
}
break;
case PORT_FEATURE_LINK_SPEED_100M_FULL:
if (bp->supported & SUPPORTED_100baseT_Full) {
- bp->req_line_speed = SPEED_100;
+ bp->link_params.req_line_speed = SPEED_100;
bp->advertising = (ADVERTISED_100baseT_Full |
ADVERTISED_TP);
} else {
BNX2X_ERR("NVRAM config error. "
"Invalid link_config 0x%x"
" speed_cap_mask 0x%x\n",
- bp->link_config, bp->speed_cap_mask);
+ bp->link_config,
+ bp->link_params.speed_cap_mask);
return;
}
break;
case PORT_FEATURE_LINK_SPEED_100M_HALF:
if (bp->supported & SUPPORTED_100baseT_Half) {
- bp->req_line_speed = SPEED_100;
- bp->req_duplex = DUPLEX_HALF;
+ bp->link_params.req_line_speed = SPEED_100;
+ bp->link_params.req_duplex = DUPLEX_HALF;
bp->advertising = (ADVERTISED_100baseT_Half |
ADVERTISED_TP);
} else {
BNX2X_ERR("NVRAM config error. "
"Invalid link_config 0x%x"
" speed_cap_mask 0x%x\n",
- bp->link_config, bp->speed_cap_mask);
+ bp->link_config,
+ bp->link_params.speed_cap_mask);
return;
}
break;
case PORT_FEATURE_LINK_SPEED_1G:
if (bp->supported & SUPPORTED_1000baseT_Full) {
- bp->req_line_speed = SPEED_1000;
+ bp->link_params.req_line_speed = SPEED_1000;
bp->advertising = (ADVERTISED_1000baseT_Full |
ADVERTISED_TP);
} else {
BNX2X_ERR("NVRAM config error. "
"Invalid link_config 0x%x"
" speed_cap_mask 0x%x\n",
- bp->link_config, bp->speed_cap_mask);
+ bp->link_config,
+ bp->link_params.speed_cap_mask);
return;
}
break;
case PORT_FEATURE_LINK_SPEED_2_5G:
if (bp->supported & SUPPORTED_2500baseX_Full) {
- bp->req_line_speed = SPEED_2500;
+ bp->link_params.req_line_speed = SPEED_2500;
bp->advertising = (ADVERTISED_2500baseX_Full |
ADVERTISED_TP);
} else {
BNX2X_ERR("NVRAM config error. "
"Invalid link_config 0x%x"
" speed_cap_mask 0x%x\n",
- bp->link_config, bp->speed_cap_mask);
+ bp->link_config,
+ bp->link_params.speed_cap_mask);
return;
}
break;
@@ -7778,14 +5292,15 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
case PORT_FEATURE_LINK_SPEED_10G_KX4:
case PORT_FEATURE_LINK_SPEED_10G_KR:
if (bp->supported & SUPPORTED_10000baseT_Full) {
- bp->req_line_speed = SPEED_10000;
+ bp->link_params.req_line_speed = SPEED_10000;
bp->advertising = (ADVERTISED_10000baseT_Full |
ADVERTISED_FIBRE);
} else {
BNX2X_ERR("NVRAM config error. "
"Invalid link_config 0x%x"
" speed_cap_mask 0x%x\n",
- bp->link_config, bp->speed_cap_mask);
+ bp->link_config,
+ bp->link_params.speed_cap_mask);
return;
}
break;
@@ -7794,30 +5309,28 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
BNX2X_ERR("NVRAM config error. "
"BAD link speed link_config 0x%x\n",
bp->link_config);
- bp->req_autoneg |= AUTONEG_SPEED;
- bp->req_line_speed = 0;
+ bp->link_params.req_line_speed = SPEED_AUTO_NEG;
bp->advertising = bp->supported;
break;
}
- BNX2X_DEV_INFO("req_line_speed %d req_duplex %d\n",
- bp->req_line_speed, bp->req_duplex);
- bp->req_flow_ctrl = (bp->link_config &
+ bp->link_params.req_flow_ctrl = (bp->link_config &
PORT_FEATURE_FLOW_CONTROL_MASK);
- if ((bp->req_flow_ctrl == FLOW_CTRL_AUTO) &&
- (bp->supported & SUPPORTED_Autoneg))
- bp->req_autoneg |= AUTONEG_FLOW_CTRL;
+ if ((bp->link_params.req_flow_ctrl == FLOW_CTRL_AUTO) &&
+ (!bp->supported & SUPPORTED_Autoneg))
+ bp->link_params.req_flow_ctrl = FLOW_CTRL_NONE;
- BNX2X_DEV_INFO("req_autoneg 0x%x req_flow_ctrl 0x%x"
+ BNX2X_DEV_INFO("req_line_speed %d req_duplex %d req_flow_ctrl 0x%x"
" advertising 0x%x\n",
- bp->req_autoneg, bp->req_flow_ctrl, bp->advertising);
+ bp->link_params.req_line_speed,
+ bp->link_params.req_duplex,
+ bp->link_params.req_flow_ctrl, bp->advertising);
}
static void bnx2x_get_hwinfo(struct bnx2x *bp)
{
u32 val, val2, val3, val4, id;
int port = bp->port;
- u32 switch_cfg;
bp->shmem_base = REG_RD(bp, MISC_REG_SHARED_MEM_ADDR);
BNX2X_DEV_INFO("shmem offset is %x\n", bp->shmem_base);
@@ -7835,6 +5348,8 @@ static void bnx2x_get_hwinfo(struct bnx2x *bp)
bp->chip_id = id;
BNX2X_DEV_INFO("chip ID is %x\n", id);
+ bp->link_params.bp = bp;
+
if (!bp->shmem_base || (bp->shmem_base != 0xAF900)) {
BNX2X_DEV_INFO("MCP not active\n");
nomcp = 1;
@@ -7851,35 +5366,32 @@ static void bnx2x_get_hwinfo(struct bnx2x *bp)
bp->hw_config = SHMEM_RD(bp, dev_info.shared_hw_config.config);
bp->board = SHMEM_RD(bp, dev_info.shared_hw_config.board);
- bp->serdes_config =
+ bp->link_params.serdes_config =
SHMEM_RD(bp, dev_info.port_hw_config[port].serdes_config);
- bp->lane_config =
+ bp->link_params.lane_config =
SHMEM_RD(bp, dev_info.port_hw_config[port].lane_config);
- bp->ext_phy_config =
+ bp->link_params.ext_phy_config =
SHMEM_RD(bp,
dev_info.port_hw_config[port].external_phy_config);
- bp->speed_cap_mask =
+ bp->link_params.speed_cap_mask =
SHMEM_RD(bp,
dev_info.port_hw_config[port].speed_capability_mask);
bp->link_config =
SHMEM_RD(bp, dev_info.port_feature_config[port].link_config);
- BNX2X_DEV_INFO("hw_config (%08x) board (%08x) serdes_config (%08x)\n"
- KERN_INFO " lane_config (%08x) ext_phy_config (%08x)\n"
- KERN_INFO " speed_cap_mask (%08x) link_config (%08x)"
- " fw_seq (%08x)\n",
- bp->hw_config, bp->board, bp->serdes_config,
- bp->lane_config, bp->ext_phy_config,
- bp->speed_cap_mask, bp->link_config, bp->fw_seq);
-
- switch_cfg = (bp->link_config & PORT_FEATURE_CONNECTED_SWITCH_MASK);
- bnx2x_link_settings_supported(bp, switch_cfg);
+ BNX2X_DEV_INFO("serdes_config (%08x) lane_config (%08x)\n"
+ KERN_INFO " ext_phy_config (%08x) speed_cap_mask (%08x)"
+ " link_config (%08x)\n",
+ bp->link_params.serdes_config,
+ bp->link_params.lane_config,
+ bp->link_params.ext_phy_config,
+ bp->link_params.speed_cap_mask,
+ bp->link_config);
- bp->autoneg = (bp->hw_config & SHARED_HW_CFG_AN_ENABLE_MASK);
- /* for now disable cl73 */
- bp->autoneg &= ~SHARED_HW_CFG_AN_ENABLE_CL73;
- BNX2X_DEV_INFO("autoneg 0x%x\n", bp->autoneg);
+ bp->link_params.switch_cfg = (bp->link_config &
+ PORT_FEATURE_CONNECTED_SWITCH_MASK);
+ bnx2x_link_settings_supported(bp, bp->link_params.switch_cfg);
bnx2x_link_settings_requested(bp);
@@ -7891,8 +5403,9 @@ static void bnx2x_get_hwinfo(struct bnx2x *bp)
bp->dev->dev_addr[3] = (u8)(val >> 16 & 0xff);
bp->dev->dev_addr[4] = (u8)(val >> 8 & 0xff);
bp->dev->dev_addr[5] = (u8)(val & 0xff);
+ memcpy(bp->link_params.mac_addr, bp->dev->dev_addr, ETH_ALEN);
+ memcpy(bp->dev->perm_addr, bp->dev->dev_addr, ETH_ALEN);
- memcpy(bp->dev->perm_addr, bp->dev->dev_addr, 6);
val = SHMEM_RD(bp, dev_info.shared_hw_config.part_num);
@@ -7945,21 +5458,23 @@ static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
cmd->advertising = bp->advertising;
if (netif_carrier_ok(dev)) {
- cmd->speed = bp->line_speed;
- cmd->duplex = bp->duplex;
+ cmd->speed = bp->link_vars.line_speed;
+ cmd->duplex = bp->link_vars.duplex;
} else {
- cmd->speed = bp->req_line_speed;
- cmd->duplex = bp->req_duplex;
+ cmd->speed = bp->link_params.req_line_speed;
+ cmd->duplex = bp->link_params.req_duplex;
}
- if (bp->phy_flags & PHY_XGXS_FLAG) {
- u32 ext_phy_type = XGXS_EXT_PHY_TYPE(bp);
+ if (bp->link_params.switch_cfg == SWITCH_CFG_10G) {
+ u32 ext_phy_type =
+ XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config);
switch (ext_phy_type) {
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
cmd->port = PORT_FIBRE;
break;
@@ -7967,9 +5482,15 @@ static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
cmd->port = PORT_TP;
break;
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE:
+ BNX2X_ERR("XGXS PHY Failure detected 0x%x\n",
+ bp->link_params.ext_phy_config);
+ break;
+
default:
DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n",
- bp->ext_phy_config);
+ bp->link_params.ext_phy_config);
+ break;
}
} else
cmd->port = PORT_TP;
@@ -7977,7 +5498,7 @@ static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
cmd->phy_address = bp->phy_addr;
cmd->transceiver = XCVR_INTERNAL;
- if (bp->req_autoneg & AUTONEG_SPEED)
+ if (bp->link_params.req_line_speed == SPEED_AUTO_NEG)
cmd->autoneg = AUTONEG_ENABLE;
else
cmd->autoneg = AUTONEG_DISABLE;
@@ -8018,9 +5539,8 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
/* advertise the requested speed and duplex if supported */
cmd->advertising &= bp->supported;
- bp->req_autoneg |= AUTONEG_SPEED;
- bp->req_line_speed = 0;
- bp->req_duplex = DUPLEX_FULL;
+ bp->link_params.req_line_speed = SPEED_AUTO_NEG;
+ bp->link_params.req_duplex = DUPLEX_FULL;
bp->advertising |= (ADVERTISED_Autoneg | cmd->advertising);
} else { /* forced speed */
@@ -8126,34 +5646,45 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
return -EINVAL;
}
- bp->req_autoneg &= ~AUTONEG_SPEED;
- bp->req_line_speed = cmd->speed;
- bp->req_duplex = cmd->duplex;
+ bp->link_params.req_line_speed = cmd->speed;
+ bp->link_params.req_duplex = cmd->duplex;
bp->advertising = advertising;
}
- DP(NETIF_MSG_LINK, "req_autoneg 0x%x req_line_speed %d\n"
+ DP(NETIF_MSG_LINK, "req_line_speed %d\n"
DP_LEVEL " req_duplex %d advertising 0x%x\n",
- bp->req_autoneg, bp->req_line_speed, bp->req_duplex,
+ bp->link_params.req_line_speed, bp->link_params.req_duplex,
bp->advertising);
bnx2x_stop_stats(bp);
- bnx2x_link_initialize(bp);
+ bnx2x_link_set(bp);
return 0;
}
+#define PHY_FW_VER_LEN 10
+
static void bnx2x_get_drvinfo(struct net_device *dev,
struct ethtool_drvinfo *info)
{
struct bnx2x *bp = netdev_priv(dev);
+ char phy_fw_ver[PHY_FW_VER_LEN];
strcpy(info->driver, DRV_MODULE_NAME);
strcpy(info->version, DRV_MODULE_VERSION);
- snprintf(info->fw_version, 32, "%d.%d.%d:%d (BC VER %x)",
+
+ phy_fw_ver[0] = '\0';
+ bnx2x_phy_hw_lock(bp);
+ bnx2x_get_ext_phy_fw_version(&bp->link_params,
+ (bp->state != BNX2X_STATE_CLOSED),
+ phy_fw_ver, PHY_FW_VER_LEN);
+ bnx2x_phy_hw_unlock(bp);
+
+ snprintf(info->fw_version, 32, "%d.%d.%d:%d BC:%x%s%s",
BCM_5710_FW_MAJOR_VERSION, BCM_5710_FW_MINOR_VERSION,
- BCM_5710_FW_REVISION_VERSION, BCM_5710_FW_COMPILE_FLAGS,
- bp->bc_ver);
+ BCM_5710_FW_REVISION_VERSION,
+ BCM_5710_FW_COMPILE_FLAGS, bp->bc_ver,
+ ((phy_fw_ver[0] != '\0')? " PHY:":""), phy_fw_ver);
strcpy(info->bus_info, pci_name(bp->pdev));
info->n_stats = BNX2X_NUM_STATS;
info->testinfo_len = BNX2X_NUM_TESTS;
@@ -8221,7 +5752,7 @@ static int bnx2x_nway_reset(struct net_device *dev)
}
bnx2x_stop_stats(bp);
- bnx2x_link_initialize(bp);
+ bnx2x_link_set(bp);
return 0;
}
@@ -8605,7 +6136,22 @@ static int bnx2x_set_eeprom(struct net_device *dev,
/* parameters already validated in ethtool_set_eeprom */
- rc = bnx2x_nvram_write(bp, eeprom->offset, eebuf, eeprom->len);
+ /* If the magic number is PHY (0x00504859) upgrade the PHY FW */
+ if (eeprom->magic == 0x00504859) {
+
+ bnx2x_phy_hw_lock(bp);
+ rc = bnx2x_flash_download(bp, bp->port,
+ bp->link_params.ext_phy_config,
+ (bp->state != BNX2X_STATE_CLOSED),
+ eebuf, eeprom->len);
+ rc |= bnx2x_link_reset(&bp->link_params,
+ &bp->link_vars);
+ rc |= bnx2x_phy_init(&bp->link_params,
+ &bp->link_vars);
+ bnx2x_phy_hw_unlock(bp);
+
+ } else
+ rc = bnx2x_nvram_write(bp, eeprom->offset, eebuf, eeprom->len);
return rc;
}
@@ -8691,10 +6237,13 @@ static void bnx2x_get_pauseparam(struct net_device *dev,
{
struct bnx2x *bp = netdev_priv(dev);
- epause->autoneg =
- ((bp->req_autoneg & AUTONEG_FLOW_CTRL) == AUTONEG_FLOW_CTRL);
- epause->rx_pause = ((bp->flow_ctrl & FLOW_CTRL_RX) == FLOW_CTRL_RX);
- epause->tx_pause = ((bp->flow_ctrl & FLOW_CTRL_TX) == FLOW_CTRL_TX);
+ epause->autoneg = (bp->link_params.req_flow_ctrl == FLOW_CTRL_AUTO) &&
+ (bp->link_params.req_line_speed == SPEED_AUTO_NEG);
+
+ epause->rx_pause = ((bp->link_vars.flow_ctrl & FLOW_CTRL_RX) ==
+ FLOW_CTRL_RX);
+ epause->tx_pause = ((bp->link_vars.flow_ctrl & FLOW_CTRL_TX) ==
+ FLOW_CTRL_TX);
DP(NETIF_MSG_LINK, "ethtool_pauseparam: cmd %d\n"
DP_LEVEL " autoneg %d rx_pause %d tx_pause %d\n",
@@ -8710,32 +6259,31 @@ static int bnx2x_set_pauseparam(struct net_device *dev,
DP_LEVEL " autoneg %d rx_pause %d tx_pause %d\n",
epause->cmd, epause->autoneg, epause->rx_pause, epause->tx_pause);
- if (epause->autoneg) {
- if (!(bp->supported & SUPPORTED_Autoneg)) {
- DP(NETIF_MSG_LINK, "Aotoneg not supported\n");
- return -EINVAL;
- }
-
- bp->req_autoneg |= AUTONEG_FLOW_CTRL;
- } else
- bp->req_autoneg &= ~AUTONEG_FLOW_CTRL;
-
- bp->req_flow_ctrl = FLOW_CTRL_AUTO;
+ bp->link_params.req_flow_ctrl = FLOW_CTRL_AUTO;
if (epause->rx_pause)
- bp->req_flow_ctrl |= FLOW_CTRL_RX;
+ bp->link_params.req_flow_ctrl |= FLOW_CTRL_RX;
+
if (epause->tx_pause)
- bp->req_flow_ctrl |= FLOW_CTRL_TX;
+ bp->link_params.req_flow_ctrl |= FLOW_CTRL_TX;
- if (!(bp->req_autoneg & AUTONEG_FLOW_CTRL) &&
- (bp->req_flow_ctrl == FLOW_CTRL_AUTO))
- bp->req_flow_ctrl = FLOW_CTRL_NONE;
+ if (bp->link_params.req_flow_ctrl == FLOW_CTRL_AUTO)
+ bp->link_params.req_flow_ctrl = FLOW_CTRL_NONE;
- DP(NETIF_MSG_LINK, "req_autoneg 0x%x req_flow_ctrl 0x%x\n",
- bp->req_autoneg, bp->req_flow_ctrl);
+ if (epause->autoneg) {
+ if (!(bp->supported & SUPPORTED_Autoneg)) {
+ DP(NETIF_MSG_LINK, "Autoneg not supported\n");
+ return -EINVAL;
+ }
+
+ if (bp->link_params.req_line_speed == SPEED_AUTO_NEG)
+ bp->link_params.req_flow_ctrl = FLOW_CTRL_AUTO;
+ }
+ DP(NETIF_MSG_LINK,
+ "req_flow_ctrl 0x%x\n", bp->link_params.req_flow_ctrl);
bnx2x_stop_stats(bp);
- bnx2x_link_initialize(bp);
+ bnx2x_link_set(bp);
return 0;
}
@@ -8943,18 +6491,25 @@ static int bnx2x_phys_id(struct net_device *dev, u32 data)
data = 2;
for (i = 0; i < (data * 2); i++) {
- if ((i % 2) == 0) {
- bnx2x_leds_set(bp, SPEED_1000);
- } else {
- bnx2x_leds_unset(bp);
- }
+ if ((i % 2) == 0)
+ bnx2x_set_led(bp, bp->port, LED_MODE_OPER, SPEED_1000,
+ bp->link_params.hw_led_mode,
+ bp->link_params.chip_id);
+ else
+ bnx2x_set_led(bp, bp->port, LED_MODE_OFF, 0,
+ bp->link_params.hw_led_mode,
+ bp->link_params.chip_id);
+
msleep_interruptible(500);
if (signal_pending(current))
break;
}
- if (bp->link_up)
- bnx2x_leds_set(bp, bp->line_speed);
+ if (bp->link_vars.link_up)
+ bnx2x_set_led(bp, bp->port, LED_MODE_OPER,
+ bp->link_vars.line_speed,
+ bp->link_params.hw_led_mode,
+ bp->link_params.chip_id);
return 0;
}
@@ -9470,7 +7025,7 @@ static int bnx2x_change_mac_addr(struct net_device *dev, void *p)
return 0;
}
-/* Called with rtnl_lock */
+/* called with rtnl_lock */
static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
struct mii_ioctl_data *data = if_mii(ifr);
@@ -9482,19 +7037,19 @@ static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
data->phy_id = bp->phy_addr;
/* fallthrough */
+
case SIOCGMIIREG: {
- u32 mii_regval;
+ u16 mii_regval;
- spin_lock_bh(&bp->phy_lock);
- if (bp->state == BNX2X_STATE_OPEN) {
- err = bnx2x_mdio22_read(bp, data->reg_num & 0x1f,
- &mii_regval);
+ if (!netif_running(dev))
+ return -EAGAIN;
- data->val_out = mii_regval;
- } else {
- err = -EAGAIN;
- }
- spin_unlock_bh(&bp->phy_lock);
+ mutex_lock(&bp->phy_mutex);
+ err = bnx2x_cl45_read(bp, bp->port, 0, bp->phy_addr,
+ DEFAULT_PHY_DEV_ADDR,
+ (data->reg_num & 0x1f), &mii_regval);
+ data->val_out = mii_regval;
+ mutex_unlock(&bp->phy_mutex);
return err;
}
@@ -9502,14 +7057,14 @@ static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
if (!capable(CAP_NET_ADMIN))
return -EPERM;
- spin_lock_bh(&bp->phy_lock);
- if (bp->state == BNX2X_STATE_OPEN) {
- err = bnx2x_mdio22_write(bp, data->reg_num & 0x1f,
- data->val_in);
- } else {
- err = -EAGAIN;
- }
- spin_unlock_bh(&bp->phy_lock);
+ if (!netif_running(dev))
+ return -EAGAIN;
+
+ mutex_lock(&bp->phy_mutex);
+ err = bnx2x_cl45_write(bp, bp->port, 0, bp->phy_addr,
+ DEFAULT_PHY_DEV_ADDR,
+ (data->reg_num & 0x1f), data->val_in);
+ mutex_unlock(&bp->phy_mutex);
return err;
default:
@@ -9682,8 +7237,6 @@ static int __devinit bnx2x_init_board(struct pci_dev *pdev,
bp->dev = dev;
bp->pdev = pdev;
- spin_lock_init(&bp->phy_lock);
-
INIT_WORK(&bp->reset_task, bnx2x_reset_task);
INIT_WORK(&bp->sp_task, bnx2x_sp_task);
diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h
index 5a1aa0b..8707c0d 100644
--- a/drivers/net/bnx2x_reg.h
+++ b/drivers/net/bnx2x_reg.h
@@ -72,6 +72,8 @@
#define CCM_REG_CCM_INT_MASK 0xd01e4
/* [R 11] Interrupt register #0 read */
#define CCM_REG_CCM_INT_STS 0xd01d8
+/* [R 27] Parity register #0 read */
+#define CCM_REG_CCM_PRTY_STS 0xd01e8
/* [RW 3] The size of AG context region 0 in REG-pairs. Designates the MS
REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
Is used to determine the number of the AG context REG-pairs written back;
@@ -190,25 +192,20 @@
weight 8 (the most prioritised); 1 stands for weight 1(least
prioritised); 2 stands for weight 2; tc. */
#define CCM_REG_PBF_WEIGHT 0xd00ac
-/* [RW 6] The physical queue number of queue number 1 per port index. */
#define CCM_REG_PHYS_QNUM1_0 0xd0134
#define CCM_REG_PHYS_QNUM1_1 0xd0138
-/* [RW 6] The physical queue number of queue number 2 per port index. */
#define CCM_REG_PHYS_QNUM2_0 0xd013c
#define CCM_REG_PHYS_QNUM2_1 0xd0140
-/* [RW 6] The physical queue number of queue number 3 per port index. */
#define CCM_REG_PHYS_QNUM3_0 0xd0144
-/* [RW 6] The physical queue number of queue number 0 with QOS equal 0 port
- index 0. */
+#define CCM_REG_PHYS_QNUM3_1 0xd0148
#define CCM_REG_QOS_PHYS_QNUM0_0 0xd0114
#define CCM_REG_QOS_PHYS_QNUM0_1 0xd0118
-/* [RW 6] The physical queue number of queue number 0 with QOS equal 1 port
- index 0. */
#define CCM_REG_QOS_PHYS_QNUM1_0 0xd011c
#define CCM_REG_QOS_PHYS_QNUM1_1 0xd0120
-/* [RW 6] The physical queue number of queue number 0 with QOS equal 2 port
- index 0. */
#define CCM_REG_QOS_PHYS_QNUM2_0 0xd0124
+#define CCM_REG_QOS_PHYS_QNUM2_1 0xd0128
+#define CCM_REG_QOS_PHYS_QNUM3_0 0xd012c
+#define CCM_REG_QOS_PHYS_QNUM3_1 0xd0130
/* [RW 1] STORM - CM Interface enable. If 0 - the valid input is
disregarded; acknowledge output is deasserted; all other signals are
treated as usual; if 1 - normal activity. */
@@ -253,6 +250,7 @@
mechanism. The fields are: [5:0] - message length; [12:6] - message
pointer; 18:13] - next pointer. */
#define CCM_REG_XX_DESCR_TABLE 0xd0300
+#define CCM_REG_XX_DESCR_TABLE_SIZE 36
/* [R 7] Used to read the value of XX protection Free counter. */
#define CCM_REG_XX_FREE 0xd0184
/* [RW 6] Initial value for the credit counter; responsible for fulfilling
@@ -296,6 +294,8 @@
/* [WB 24] MATT ram access. each entry has the following
format:{RegionLength[11:0]; egionOffset[11:0]} */
#define CDU_REG_MATT 0x101100
+/* [RW 1] when this bit is set the CDU operates in e1hmf mode */
+#define CDU_REG_MF_MODE 0x101050
/* [R 1] indication the initializing the activity counter by the hardware
was done. */
#define CFC_REG_AC_INIT_DONE 0x104078
@@ -330,6 +330,9 @@
field allows changing the priorities of the weighted-round-robin arbiter
which selects which CFC load client should be served next */
#define CFC_REG_LCREQ_WEIGHTS 0x104084
+/* [RW 16] Link List ram access; data = {prev_lcid; ext_lcid} */
+#define CFC_REG_LINK_LIST 0x104c00
+#define CFC_REG_LINK_LIST_SIZE 256
/* [R 1] indication the initializing the link list by the hardware was done. */
#define CFC_REG_LL_INIT_DONE 0x104074
/* [R 9] Number of allocated LCIDs which are at empty state */
@@ -342,6 +345,45 @@
#define CFC_REG_NUM_LCIDS_LEAVING 0x104018
/* [RW 8] The event id for aggregated interrupt 0 */
#define CSDM_REG_AGG_INT_EVENT_0 0xc2038
+#define CSDM_REG_AGG_INT_EVENT_1 0xc203c
+#define CSDM_REG_AGG_INT_EVENT_10 0xc2060
+#define CSDM_REG_AGG_INT_EVENT_11 0xc2064
+#define CSDM_REG_AGG_INT_EVENT_12 0xc2068
+#define CSDM_REG_AGG_INT_EVENT_13 0xc206c
+#define CSDM_REG_AGG_INT_EVENT_14 0xc2070
+#define CSDM_REG_AGG_INT_EVENT_15 0xc2074
+#define CSDM_REG_AGG_INT_EVENT_16 0xc2078
+#define CSDM_REG_AGG_INT_EVENT_17 0xc207c
+#define CSDM_REG_AGG_INT_EVENT_18 0xc2080
+#define CSDM_REG_AGG_INT_EVENT_19 0xc2084
+#define CSDM_REG_AGG_INT_EVENT_2 0xc2040
+#define CSDM_REG_AGG_INT_EVENT_20 0xc2088
+#define CSDM_REG_AGG_INT_EVENT_21 0xc208c
+#define CSDM_REG_AGG_INT_EVENT_22 0xc2090
+#define CSDM_REG_AGG_INT_EVENT_23 0xc2094
+#define CSDM_REG_AGG_INT_EVENT_24 0xc2098
+#define CSDM_REG_AGG_INT_EVENT_25 0xc209c
+#define CSDM_REG_AGG_INT_EVENT_26 0xc20a0
+#define CSDM_REG_AGG_INT_EVENT_27 0xc20a4
+#define CSDM_REG_AGG_INT_EVENT_28 0xc20a8
+#define CSDM_REG_AGG_INT_EVENT_29 0xc20ac
+#define CSDM_REG_AGG_INT_EVENT_3 0xc2044
+#define CSDM_REG_AGG_INT_EVENT_30 0xc20b0
+#define CSDM_REG_AGG_INT_EVENT_31 0xc20b4
+#define CSDM_REG_AGG_INT_EVENT_4 0xc2048
+/* [RW 1] The T bit for aggregated interrupt 0 */
+#define CSDM_REG_AGG_INT_T_0 0xc20b8
+#define CSDM_REG_AGG_INT_T_1 0xc20bc
+#define CSDM_REG_AGG_INT_T_10 0xc20e0
+#define CSDM_REG_AGG_INT_T_11 0xc20e4
+#define CSDM_REG_AGG_INT_T_12 0xc20e8
+#define CSDM_REG_AGG_INT_T_13 0xc20ec
+#define CSDM_REG_AGG_INT_T_14 0xc20f0
+#define CSDM_REG_AGG_INT_T_15 0xc20f4
+#define CSDM_REG_AGG_INT_T_16 0xc20f8
+#define CSDM_REG_AGG_INT_T_17 0xc20fc
+#define CSDM_REG_AGG_INT_T_18 0xc2100
+#define CSDM_REG_AGG_INT_T_19 0xc2104
/* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
#define CSDM_REG_CFC_RSP_START_ADDR 0xc2008
/* [RW 16] The maximum value of the competion counter #0 */
@@ -358,6 +400,9 @@
/* [RW 32] Interrupt mask register #0 read/write */
#define CSDM_REG_CSDM_INT_MASK_0 0xc229c
#define CSDM_REG_CSDM_INT_MASK_1 0xc22ac
+/* [R 32] Interrupt register #0 read */
+#define CSDM_REG_CSDM_INT_STS_0 0xc2290
+#define CSDM_REG_CSDM_INT_STS_1 0xc22a0
/* [RW 11] Parity mask register #0 read/write */
#define CSDM_REG_CSDM_PRTY_MASK 0xc22bc
/* [R 11] Parity register #0 read */
@@ -443,6 +488,9 @@
/* [RW 32] Interrupt mask register #0 read/write */
#define CSEM_REG_CSEM_INT_MASK_0 0x200110
#define CSEM_REG_CSEM_INT_MASK_1 0x200120
+/* [R 32] Interrupt register #0 read */
+#define CSEM_REG_CSEM_INT_STS_0 0x200104
+#define CSEM_REG_CSEM_INT_STS_1 0x200114
/* [RW 32] Parity mask register #0 read/write */
#define CSEM_REG_CSEM_PRTY_MASK_0 0x200130
#define CSEM_REG_CSEM_PRTY_MASK_1 0x200140
@@ -453,9 +501,8 @@
#define CSEM_REG_ENABLE_OUT 0x2000a8
/* [RW 32] This address space contains all registers and memories that are
placed in SEM_FAST block. The SEM_FAST registers are described in
- appendix B. In order to access the SEM_FAST registers the base address
- CSEM_REGISTERS_FAST_MEMORY (Offset: 0x220000) should be added to each
- SEM_FAST register offset. */
+ appendix B. In order to access the sem_fast registers the base address
+ ~fast_memory.fast_memory should be added to eachsem_fast register offset. */
#define CSEM_REG_FAST_MEMORY 0x220000
/* [RW 1] Disables input messages from FIC0 May be updated during run_time
by the microcode */
@@ -466,6 +513,7 @@
/* [RW 15] Interrupt table Read and write access to it is not possible in
the middle of the work */
#define CSEM_REG_INT_TABLE 0x200400
+#define CSEM_REG_INT_TABLE_SIZE 256
/* [ST 24] Statistics register. The number of messages that entered through
FIC0 */
#define CSEM_REG_MSG_NUM_FIC0 0x200000
@@ -630,6 +678,8 @@
#define DORQ_REG_AGG_CMD3 0x17006c
/* [RW 28] UCM Header. */
#define DORQ_REG_CMHEAD_RX 0x170050
+/* [RW 32] Doorbell address for RBC doorbells (function 0). */
+#define DORQ_REG_DB_ADDR0 0x17008c
/* [RW 5] Interrupt mask register #0 read/write */
#define DORQ_REG_DORQ_INT_MASK 0x170180
/* [R 5] Interrupt register #0 read */
@@ -690,75 +740,33 @@
#define HC_CONFIG_0_REG_SINGLE_ISR_EN_0 (0x1<<1)
#define HC_REG_AGG_INT_0 0x108050
#define HC_REG_AGG_INT_1 0x108054
-/* [RW 16] attention bit and attention acknowledge bits status for port 0
- and 1 according to the following address map: addr 0 - attn_bit_0; addr 1
- - attn_ack_bit_0; addr 2 - attn_bit_1; addr 3 - attn_ack_bit_1; */
#define HC_REG_ATTN_BIT 0x108120
-/* [RW 16] attn bits status index for attn bit msg; addr 0 - function 0;
- addr 1 - functin 1 */
#define HC_REG_ATTN_IDX 0x108100
-/* [RW 32] port 0 lower 32 bits address field for attn messag. */
#define HC_REG_ATTN_MSG0_ADDR_L 0x108018
-/* [RW 32] port 1 lower 32 bits address field for attn messag. */
#define HC_REG_ATTN_MSG1_ADDR_L 0x108020
-/* [RW 8] status block number for attn bit msg - function 0; */
#define HC_REG_ATTN_NUM_P0 0x108038
-/* [RW 8] status block number for attn bit msg - function 1 */
#define HC_REG_ATTN_NUM_P1 0x10803c
#define HC_REG_CONFIG_0 0x108000
#define HC_REG_CONFIG_1 0x108004
+#define HC_REG_FUNC_NUM_P0 0x1080ac
+#define HC_REG_FUNC_NUM_P1 0x1080b0
/* [RW 3] Parity mask register #0 read/write */
#define HC_REG_HC_PRTY_MASK 0x1080a0
/* [R 3] Parity register #0 read */
#define HC_REG_HC_PRTY_STS 0x108094
-/* [RW 17] status block interrupt mask; one in each bit means unmask; zerow
- in each bit means mask; bit 0 - default SB; bit 1 - SB_0; bit 2 - SB_1...
- bit 16- SB_15; addr 0 - port 0; addr 1 - port 1 */
#define HC_REG_INT_MASK 0x108108
-/* [RW 16] port 0 attn bit condition monitoring; each bit that is set will
- lock a change fron 0 to 1 in the corresponding attention signals that
- comes from the AEU */
#define HC_REG_LEADING_EDGE_0 0x108040
#define HC_REG_LEADING_EDGE_1 0x108048
-/* [RW 16] all producer and consumer of port 0 according to the following
- addresses; U_prod: 0-15; C_prod: 16-31; U_cons: 32-47; C_cons:48-63;
- Defoult_prod: U/C/X/T/Attn-64/65/66/67/68; Defoult_cons:
- U/C/X/T/Attn-69/70/71/72/73 */
#define HC_REG_P0_PROD_CONS 0x108200
-/* [RW 16] all producer and consumer of port 1according to the following
- addresses; U_prod: 0-15; C_prod: 16-31; U_cons: 32-47; C_cons:48-63;
- Defoult_prod: U/C/X/T/Attn-64/65/66/67/68; Defoult_cons:
- U/C/X/T/Attn-69/70/71/72/73 */
#define HC_REG_P1_PROD_CONS 0x108400
-/* [W 1] This register is write only and has 4 addresses as follow: 0 =
- clear all PBA bits port 0; 1 = clear all pending interrupts request
- port0; 2 = clear all PBA bits port 1; 3 = clear all pending interrupts
- request port1; here is no meaning for the data in this register */
#define HC_REG_PBA_COMMAND 0x108140
#define HC_REG_PCI_CONFIG_0 0x108010
#define HC_REG_PCI_CONFIG_1 0x108014
-/* [RW 24] all counters acording to the following address: LSB: 0=read; 1=
- read_clear; 0-71 = HW counters (the inside order is the same as the
- interrupt table in the spec); 72-219 = SW counters 1 (stops after first
- consumer upd) the inside order is: 72-103 - U_non_default_p0; 104-135
- C_non_defaul_p0; 36-145 U/C/X/T/Attn_default_p0; 146-177
- U_non_default_p1; 178-209 C_non_defaul_p1; 10-219 U/C/X/T/Attn_default_p1
- ; 220-367 = SW counters 2 (stops when prod=cons) the inside order is:
- 220-251 - U_non_default_p0; 252-283 C_non_defaul_p0; 84-293
- U/C/X/T/Attn_default_p0; 294-325 U_non_default_p1; 326-357
- C_non_defaul_p1; 58-367 U/C/X/T/Attn_default_p1 ; 368-515 = mailbox
- counters; (the inside order of the mailbox counter is 368-431 U and C
- non_default_p0; 432-441 U/C/X/T/Attn_default_p0; 442-505 U and C
- non_default_p1; 506-515 U/C/X/T/Attn_default_p1) */
#define HC_REG_STATISTIC_COUNTERS 0x109000
-/* [RW 16] port 0 attn bit condition monitoring; each bit that is set will
- lock a change fron 1 to 0 in the corresponding attention signals that
- comes from the AEU */
#define HC_REG_TRAILING_EDGE_0 0x108044
#define HC_REG_TRAILING_EDGE_1 0x10804c
#define HC_REG_UC_RAM_ADDR_0 0x108028
#define HC_REG_UC_RAM_ADDR_1 0x108030
-/* [RW 16] ustorm address for coalesc now message */
#define HC_REG_USTORM_ADDR_FOR_COALESCE 0x108068
#define HC_REG_VQID_0 0x108008
#define HC_REG_VQID_1 0x10800c
@@ -883,14 +891,16 @@
rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP Latched
ump_tx_parity; [31] MCP Latched scpad_parity; */
#define MISC_REG_AEU_AFTER_INVERT_4_MCP 0xa458
-/* [W 11] write to this register results with the clear of the latched
+/* [W 14] write to this register results with the clear of the latched
signals; one in d0 clears RBCR latch; one in d1 clears RBCT latch; one in
d2 clears RBCN latch; one in d3 clears RBCU latch; one in d4 clears RBCP
latch; one in d5 clears GRC Latched timeout attention; one in d6 clears
GRC Latched reserved access attention; one in d7 clears Latched
rom_parity; one in d8 clears Latched ump_rx_parity; one in d9 clears
- Latched ump_tx_parity; one in d10 clears Latched scpad_parity; read from
- this register return zero */
+ Latched ump_tx_parity; one in d10 clears Latched scpad_parity (both
+ ports); one in d11 clears pxpv_misc_mps_attn; one in d12 clears
+ pxp_misc_exp_rom_attn0; one in d13 clears pxp_misc_exp_rom_attn1; read
+ from this register return zero */
#define MISC_REG_AEU_CLR_LATCH_SIGNAL 0xa45c
/* [RW 32] first 32b for enabling the output for function 0 output0. mapped
as follows: [0] NIG attention for function0; [1] NIG attention for
@@ -907,7 +917,11 @@
TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */
#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0 0xa06c
#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_1 0xa07c
+#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_2 0xa08c
#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_3 0xa09c
+#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_5 0xa0bc
+#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_6 0xa0cc
+#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_7 0xa0dc
/* [RW 32] first 32b for enabling the output for function 1 output0. mapped
as follows: [0] NIG attention for function0; [1] NIG attention for
function1; [2] GPIO1 function 1; [3] GPIO2 function 1; [4] GPIO3 function
@@ -923,9 +937,13 @@
TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */
#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 0xa10c
#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_1 0xa11c
+#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_2 0xa12c
#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_3 0xa13c
-/* [RW 32] first 32b for enabling the output for close the gate nig 0.
- mapped as follows: [0] NIG attention for function0; [1] NIG attention for
+#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_5 0xa15c
+#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_6 0xa16c
+#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_7 0xa17c
+/* [RW 32] first 32b for enabling the output for close the gate nig. mapped
+ as follows: [0] NIG attention for function0; [1] NIG attention for
function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function
0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8]
GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
@@ -939,8 +957,8 @@
TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */
#define MISC_REG_AEU_ENABLE1_NIG_0 0xa0ec
#define MISC_REG_AEU_ENABLE1_NIG_1 0xa18c
-/* [RW 32] first 32b for enabling the output for close the gate pxp 0.
- mapped as follows: [0] NIG attention for function0; [1] NIG attention for
+/* [RW 32] first 32b for enabling the output for close the gate pxp. mapped
+ as follows: [0] NIG attention for function0; [1] NIG attention for
function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function
0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8]
GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
@@ -984,34 +1002,34 @@
interrupt; */
#define MISC_REG_AEU_ENABLE2_FUNC_1_OUT_0 0xa110
#define MISC_REG_AEU_ENABLE2_FUNC_1_OUT_1 0xa120
-/* [RW 32] second 32b for enabling the output for close the gate nig 0.
- mapped as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt;
- [2] QM Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5]
- Timers Hw interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8]
- XCM Parity error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11]
- XSEMI Hw interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw
- interrupt; [14] NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI
- core Parity error; [17] Vaux PCI core Hw interrupt; [18] Debug Parity
- error; [19] Debug Hw interrupt; [20] USDM Parity error; [21] USDM Hw
- interrupt; [22] UCM Parity error; [23] UCM Hw interrupt; [24] USEMI
- Parity error; [25] USEMI Hw interrupt; [26] UPB Parity error; [27] UPB Hw
- interrupt; [28] CSDM Parity error; [29] CSDM Hw interrupt; [30] CCM
- Parity error; [31] CCM Hw interrupt; */
+/* [RW 32] second 32b for enabling the output for close the gate nig. mapped
+ as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
+ Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
+ interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity
+ error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw
+ interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14]
+ NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error;
+ [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw
+ interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM
+ Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI
+ Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM
+ Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw
+ interrupt; */
#define MISC_REG_AEU_ENABLE2_NIG_0 0xa0f0
#define MISC_REG_AEU_ENABLE2_NIG_1 0xa190
-/* [RW 32] second 32b for enabling the output for close the gate pxp 0.
- mapped as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt;
- [2] QM Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5]
- Timers Hw interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8]
- XCM Parity error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11]
- XSEMI Hw interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw
- interrupt; [14] NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI
- core Parity error; [17] Vaux PCI core Hw interrupt; [18] Debug Parity
- error; [19] Debug Hw interrupt; [20] USDM Parity error; [21] USDM Hw
- interrupt; [22] UCM Parity error; [23] UCM Hw interrupt; [24] USEMI
- Parity error; [25] USEMI Hw interrupt; [26] UPB Parity error; [27] UPB Hw
- interrupt; [28] CSDM Parity error; [29] CSDM Hw interrupt; [30] CCM
- Parity error; [31] CCM Hw interrupt; */
+/* [RW 32] second 32b for enabling the output for close the gate pxp. mapped
+ as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
+ Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
+ interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity
+ error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw
+ interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14]
+ NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error;
+ [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw
+ interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM
+ Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI
+ Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM
+ Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw
+ interrupt; */
#define MISC_REG_AEU_ENABLE2_PXP_0 0xa100
#define MISC_REG_AEU_ENABLE2_PXP_1 0xa1a0
/* [RW 32] third 32b for enabling the output for function 0 output0. mapped
@@ -1044,34 +1062,34 @@
attn1; */
#define MISC_REG_AEU_ENABLE3_FUNC_1_OUT_0 0xa114
#define MISC_REG_AEU_ENABLE3_FUNC_1_OUT_1 0xa124
-/* [RW 32] third 32b for enabling the output for close the gate nig 0.
- mapped as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2]
- PXP Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity
- error; [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC
- Hw interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE
- Parity error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13]
- IGU (HC) Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt;
- [16] pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0;
- [20] MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0;
- [23] SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST;
- [26] SW timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers
- attn_3 func1; [29] SW timers attn_4 func1; [30] General attn0; [31]
- General attn1; */
+/* [RW 32] third 32b for enabling the output for close the gate nig. mapped
+ as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP
+ Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error;
+ [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw
+ interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity
+ error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC)
+ Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16]
+ pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20]
+ MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23]
+ SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW
+ timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3
+ func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General
+ attn1; */
#define MISC_REG_AEU_ENABLE3_NIG_0 0xa0f4
#define MISC_REG_AEU_ENABLE3_NIG_1 0xa194
-/* [RW 32] third 32b for enabling the output for close the gate pxp 0.
- mapped as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2]
- PXP Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity
- error; [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC
- Hw interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE
- Parity error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13]
- IGU (HC) Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt;
- [16] pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0;
- [20] MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0;
- [23] SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST;
- [26] SW timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers
- attn_3 func1; [29] SW timers attn_4 func1; [30] General attn0; [31]
- General attn1; */
+/* [RW 32] third 32b for enabling the output for close the gate pxp. mapped
+ as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP
+ Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error;
+ [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw
+ interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity
+ error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC)
+ Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16]
+ pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20]
+ MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23]
+ SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW
+ timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3
+ func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General
+ attn1; */
#define MISC_REG_AEU_ENABLE3_PXP_0 0xa104
#define MISC_REG_AEU_ENABLE3_PXP_1 0xa1a4
/* [RW 32] fourth 32b for enabling the output for function 0 output0.mapped
@@ -1088,6 +1106,10 @@
Latched ump_tx_parity; [31] MCP Latched scpad_parity; */
#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0 0xa078
#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_2 0xa098
+#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_4 0xa0b8
+#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_5 0xa0c8
+#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_6 0xa0d8
+#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_7 0xa0e8
/* [RW 32] fourth 32b for enabling the output for function 1 output0.mapped
as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
@@ -1102,34 +1124,36 @@
Latched ump_tx_parity; [31] MCP Latched scpad_parity; */
#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0 0xa118
#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_2 0xa138
-/* [RW 32] fourth 32b for enabling the output for close the gate nig
- 0.mapped as follows: [0] General attn2; [1] General attn3; [2] General
- attn4; [3] General attn5; [4] General attn6; [5] General attn7; [6]
- General attn8; [7] General attn9; [8] General attn10; [9] General attn11;
- [10] General attn12; [11] General attn13; [12] General attn14; [13]
- General attn15; [14] General attn16; [15] General attn17; [16] General
- attn18; [17] General attn19; [18] General attn20; [19] General attn21;
- [20] Main power interrupt; [21] RBCR Latched attn; [22] RBCT Latched
- attn; [23] RBCN Latched attn; [24] RBCU Latched attn; [25] RBCP Latched
- attn; [26] GRC Latched timeout attention; [27] GRC Latched reserved
- access attention; [28] MCP Latched rom_parity; [29] MCP Latched
- ump_rx_parity; [30] MCP Latched ump_tx_parity; [31] MCP Latched
- scpad_parity; */
+#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_4 0xa158
+#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_5 0xa168
+#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_6 0xa178
+#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_7 0xa188
+/* [RW 32] fourth 32b for enabling the output for close the gate nig.mapped
+ as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
+ General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
+ [7] General attn9; [8] General attn10; [9] General attn11; [10] General
+ attn12; [11] General attn13; [12] General attn14; [13] General attn15;
+ [14] General attn16; [15] General attn17; [16] General attn18; [17]
+ General attn19; [18] General attn20; [19] General attn21; [20] Main power
+ interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
+ Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
+ Latched timeout attention; [27] GRC Latched reserved access attention;
+ [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
+ Latched ump_tx_parity; [31] MCP Latched scpad_parity; */
#define MISC_REG_AEU_ENABLE4_NIG_0 0xa0f8
#define MISC_REG_AEU_ENABLE4_NIG_1 0xa198
-/* [RW 32] fourth 32b for enabling the output for close the gate pxp
- 0.mapped as follows: [0] General attn2; [1] General attn3; [2] General
- attn4; [3] General attn5; [4] General attn6; [5] General attn7; [6]
- General attn8; [7] General attn9; [8] General attn10; [9] General attn11;
- [10] General attn12; [11] General attn13; [12] General attn14; [13]
- General attn15; [14] General attn16; [15] General attn17; [16] General
- attn18; [17] General attn19; [18] General attn20; [19] General attn21;
- [20] Main power interrupt; [21] RBCR Latched attn; [22] RBCT Latched
- attn; [23] RBCN Latched attn; [24] RBCU Latched attn; [25] RBCP Latched
- attn; [26] GRC Latched timeout attention; [27] GRC Latched reserved
- access attention; [28] MCP Latched rom_parity; [29] MCP Latched
- ump_rx_parity; [30] MCP Latched ump_tx_parity; [31] MCP Latched
- scpad_parity; */
+/* [RW 32] fourth 32b for enabling the output for close the gate pxp.mapped
+ as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
+ General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
+ [7] General attn9; [8] General attn10; [9] General attn11; [10] General
+ attn12; [11] General attn13; [12] General attn14; [13] General attn15;
+ [14] General attn16; [15] General attn17; [16] General attn18; [17]
+ General attn19; [18] General attn20; [19] General attn21; [20] Main power
+ interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
+ Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
+ Latched timeout attention; [27] GRC Latched reserved access attention;
+ [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
+ Latched ump_tx_parity; [31] MCP Latched scpad_parity; */
#define MISC_REG_AEU_ENABLE4_PXP_0 0xa108
#define MISC_REG_AEU_ENABLE4_PXP_1 0xa1a8
/* [RW 1] set/clr general attention 0; this will set/clr bit 94 in the aeu
@@ -1148,6 +1172,7 @@
#define MISC_REG_AEU_GENERAL_ATTN_19 0xa04c
#define MISC_REG_AEU_GENERAL_ATTN_10 0xa028
#define MISC_REG_AEU_GENERAL_ATTN_11 0xa02c
+#define MISC_REG_AEU_GENERAL_ATTN_12 0xa030
#define MISC_REG_AEU_GENERAL_ATTN_2 0xa008
#define MISC_REG_AEU_GENERAL_ATTN_20 0xa050
#define MISC_REG_AEU_GENERAL_ATTN_21 0xa054
@@ -1158,6 +1183,7 @@
#define MISC_REG_AEU_GENERAL_ATTN_7 0xa01c
#define MISC_REG_AEU_GENERAL_ATTN_8 0xa020
#define MISC_REG_AEU_GENERAL_ATTN_9 0xa024
+#define MISC_REG_AEU_GENERAL_MASK 0xa61c
/* [RW 32] first 32b for inverting the input for function 0; for each bit:
0= do not invert; 1= invert; mapped as follows: [0] NIG attention for
function0; [1] NIG attention for function1; [2] GPIO1 mcp; [3] GPIO2 mcp;
@@ -1189,10 +1215,29 @@
#define MISC_REG_AEU_INVERTER_2_FUNC_0 0xa230
#define MISC_REG_AEU_INVERTER_2_FUNC_1 0xa240
/* [RW 10] [7:0] = mask 8 attention output signals toward IGU function0;
- [9:8] = mask close the gates signals of function 0 toward PXP [8] and NIG
- [9]. Zero = mask; one = unmask */
+ [9:8] = raserved. Zero = mask; one = unmask */
#define MISC_REG_AEU_MASK_ATTN_FUNC_0 0xa060
#define MISC_REG_AEU_MASK_ATTN_FUNC_1 0xa064
+/* [RW 1] If set a system kill occurred */
+#define MISC_REG_AEU_SYS_KILL_OCCURRED 0xa610
+/* [RW 32] Represent the status of the input vector to the AEU when a system
+ kill occurred. The register is reset in por reset. Mapped as follows: [0]
+ NIG attention for function0; [1] NIG attention for function1; [2] GPIO1
+ mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp; [6] GPIO1 function 1;
+ [7] GPIO2 function 1; [8] GPIO3 function 1; [9] GPIO4 function 1; [10]
+ PCIE glue/PXP VPD event function0; [11] PCIE glue/PXP VPD event
+ function1; [12] PCIE glue/PXP Expansion ROM event0; [13] PCIE glue/PXP
+ Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16] MSI/X indication for
+ mcp; [17] MSI/X indication for function 1; [18] BRB Parity error; [19]
+ BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC
+ Parity error; [23] SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw
+ interrupt; [26] TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI
+ Parity error; [29] TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw
+ interrupt; */
+#define MISC_REG_AEU_SYS_KILL_STATUS_0 0xa600
+#define MISC_REG_AEU_SYS_KILL_STATUS_1 0xa604
+#define MISC_REG_AEU_SYS_KILL_STATUS_2 0xa608
+#define MISC_REG_AEU_SYS_KILL_STATUS_3 0xa60c
/* [R 4] This field indicates the type of the device. '0' - 2 Ports; '1' - 1
Port. */
#define MISC_REG_BOND_ID 0xa400
@@ -1206,8 +1251,80 @@
starts at 0x0 for the A0 tape-out and increments by one for each
all-layer tape-out. */
#define MISC_REG_CHIP_REV 0xa40c
-/* [RW 32] The following driver registers(1..6) represent 6 drivers and 32
- clients. Each client can be controlled by one driver only. One in each
+/* [RW 32] The following driver registers(1...16) represent 16 drivers and
+ 32 clients. Each client can be controlled by one driver only. One in each
+ bit represent that this driver control the appropriate client (Ex: bit 5
+ is set means this driver control client number 5). addr1 = set; addr0 =
+ clear; read from both addresses will give the same result = status. write
+ to address 1 will set a request to control all the clients that their
+ appropriate bit (in the write command) is set. if the client is free (the
+ appropriate bit in all the other drivers is clear) one will be written to
+ that driver register; if the client isn't free the bit will remain zero.
+ if the appropriate bit is set (the driver request to gain control on a
+ client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
+ interrupt will be asserted). write to address 0 will set a request to
+ free all the clients that their appropriate bit (in the write command) is
+ set. if the appropriate bit is clear (the driver request to free a client
+ it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
+ be asserted). */
+#define MISC_REG_DRIVER_CONTROL_10 0xa3e0
+#define MISC_REG_DRIVER_CONTROL_10_SIZE 2
+/* [RW 32] The following driver registers(1...16) represent 16 drivers and
+ 32 clients. Each client can be controlled by one driver only. One in each
+ bit represent that this driver control the appropriate client (Ex: bit 5
+ is set means this driver control client number 5). addr1 = set; addr0 =
+ clear; read from both addresses will give the same result = status. write
+ to address 1 will set a request to control all the clients that their
+ appropriate bit (in the write command) is set. if the client is free (the
+ appropriate bit in all the other drivers is clear) one will be written to
+ that driver register; if the client isn't free the bit will remain zero.
+ if the appropriate bit is set (the driver request to gain control on a
+ client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
+ interrupt will be asserted). write to address 0 will set a request to
+ free all the clients that their appropriate bit (in the write command) is
+ set. if the appropriate bit is clear (the driver request to free a client
+ it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
+ be asserted). */
+#define MISC_REG_DRIVER_CONTROL_11 0xa3e8
+#define MISC_REG_DRIVER_CONTROL_11_SIZE 2
+/* [RW 32] The following driver registers(1...16) represent 16 drivers and
+ 32 clients. Each client can be controlled by one driver only. One in each
+ bit represent that this driver control the appropriate client (Ex: bit 5
+ is set means this driver control client number 5). addr1 = set; addr0 =
+ clear; read from both addresses will give the same result = status. write
+ to address 1 will set a request to control all the clients that their
+ appropriate bit (in the write command) is set. if the client is free (the
+ appropriate bit in all the other drivers is clear) one will be written to
+ that driver register; if the client isn't free the bit will remain zero.
+ if the appropriate bit is set (the driver request to gain control on a
+ client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
+ interrupt will be asserted). write to address 0 will set a request to
+ free all the clients that their appropriate bit (in the write command) is
+ set. if the appropriate bit is clear (the driver request to free a client
+ it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
+ be asserted). */
+#define MISC_REG_DRIVER_CONTROL_12 0xa3f0
+#define MISC_REG_DRIVER_CONTROL_12_SIZE 2
+/* [RW 32] The following driver registers(1...16) represent 16 drivers and
+ 32 clients. Each client can be controlled by one driver only. One in each
+ bit represent that this driver control the appropriate client (Ex: bit 5
+ is set means this driver control client number 5). addr1 = set; addr0 =
+ clear; read from both addresses will give the same result = status. write
+ to address 1 will set a request to control all the clients that their
+ appropriate bit (in the write command) is set. if the client is free (the
+ appropriate bit in all the other drivers is clear) one will be written to
+ that driver register; if the client isn't free the bit will remain zero.
+ if the appropriate bit is set (the driver request to gain control on a
+ client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
+ interrupt will be asserted). write to address 0 will set a request to
+ free all the clients that their appropriate bit (in the write command) is
+ set. if the appropriate bit is clear (the driver request to free a client
+ it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
+ be asserted). */
+#define MISC_REG_DRIVER_CONTROL_13 0xa3f8
+#define MISC_REG_DRIVER_CONTROL_13_SIZE 2
+/* [RW 32] The following driver registers(1...16) represent 16 drivers and
+ 32 clients. Each client can be controlled by one driver only. One in each
bit represent that this driver control the appropriate client (Ex: bit 5
is set means this driver control client number 5). addr1 = set; addr0 =
clear; read from both addresses will give the same result = status. write
@@ -1223,6 +1340,47 @@
it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
be asserted). */
#define MISC_REG_DRIVER_CONTROL_1 0xa510
+#define MISC_REG_DRIVER_CONTROL_14 0xa5e0
+#define MISC_REG_DRIVER_CONTROL_14_SIZE 2
+/* [RW 32] The following driver registers(1...16) represent 16 drivers and
+ 32 clients. Each client can be controlled by one driver only. One in each
+ bit represent that this driver control the appropriate client (Ex: bit 5
+ is set means this driver control client number 5). addr1 = set; addr0 =
+ clear; read from both addresses will give the same result = status. write
+ to address 1 will set a request to control all the clients that their
+ appropriate bit (in the write command) is set. if the client is free (the
+ appropriate bit in all the other drivers is clear) one will be written to
+ that driver register; if the client isn't free the bit will remain zero.
+ if the appropriate bit is set (the driver request to gain control on a
+ client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
+ interrupt will be asserted). write to address 0 will set a request to
+ free all the clients that their appropriate bit (in the write command) is
+ set. if the appropriate bit is clear (the driver request to free a client
+ it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
+ be asserted). */
+#define MISC_REG_DRIVER_CONTROL_15 0xa5e8
+#define MISC_REG_DRIVER_CONTROL_15_SIZE 2
+/* [RW 32] The following driver registers(1...16) represent 16 drivers and
+ 32 clients. Each client can be controlled by one driver only. One in each
+ bit represent that this driver control the appropriate client (Ex: bit 5
+ is set means this driver control client number 5). addr1 = set; addr0 =
+ clear; read from both addresses will give the same result = status. write
+ to address 1 will set a request to control all the clients that their
+ appropriate bit (in the write command) is set. if the client is free (the
+ appropriate bit in all the other drivers is clear) one will be written to
+ that driver register; if the client isn't free the bit will remain zero.
+ if the appropriate bit is set (the driver request to gain control on a
+ client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
+ interrupt will be asserted). write to address 0 will set a request to
+ free all the clients that their appropriate bit (in the write command) is
+ set. if the appropriate bit is clear (the driver request to free a client
+ it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
+ be asserted). */
+#define MISC_REG_DRIVER_CONTROL_16 0xa5f0
+#define MISC_REG_DRIVER_CONTROL_16_SIZE 2
+/* [RW 1] e1hmf for WOL. If clr WOL signal o the PXP will be send on bit 0
+ only. */
+#define MISC_REG_E1HMF_MODE 0xa5f8
/* [RW 32] GPIO. [31-28] FLOAT port 0; [27-24] FLOAT port 0; When any of
these bits is written as a '1'; the corresponding SPIO bit will turn off
it's drivers and become an input. This is the reset state of all GPIO
@@ -1240,6 +1398,18 @@
This is the result value of the pin; not the drive value. Writing these
bits will have not effect. */
#define MISC_REG_GPIO 0xa490
+/* [R 28] this field hold the last information that caused reserved
+ attention. bits [19:0] - address; [22:20] function; [23] reserved;
+ [27:24] the master thatcaused the attention - according to the following
+ encodeing:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 =
+ dbu; 8 = dmae */
+#define MISC_REG_GRC_RSV_ATTN 0xa3c0
+/* [R 28] this field hold the last information that caused timeout
+ attention. bits [19:0] - address; [22:20] function; [23] reserved;
+ [27:24] the master thatcaused the attention - according to the following
+ encodeing:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 =
+ dbu; 8 = dmae */
+#define MISC_REG_GRC_TIMEOUT_ATTN 0xa3c4
/* [RW 1] Setting this bit enables a timer in the GRC block to timeout any
access that does not finish within
~misc_registers_grc_timout_val.grc_timeout_val cycles. When this bit is
@@ -1282,6 +1452,11 @@
#define MISC_REG_MISC_PRTY_MASK 0xa398
/* [R 1] Parity register #0 read */
#define MISC_REG_MISC_PRTY_STS 0xa38c
+#define MISC_REG_NIG_WOL_P0 0xa270
+#define MISC_REG_NIG_WOL_P1 0xa274
+/* [R 1] If set indicate that the pcie_rst_b was asserted without perst
+ assertion */
+#define MISC_REG_PCIE_HOT_RESET 0xa618
/* [RW 32] 32 LSB of storm PLL first register; reset val = 0x 071d2911.
inside order of the bits is: [0] P1 divider[0] (reset value 1); [1] P1
divider[1] (reset value 0); [2] P1 divider[2] (reset value 0); [3] P1
@@ -1303,7 +1478,7 @@
#define MISC_REG_PLL_STORM_CTRL_2 0xa298
#define MISC_REG_PLL_STORM_CTRL_3 0xa29c
#define MISC_REG_PLL_STORM_CTRL_4 0xa2a0
-/* [RW 32] reset reg#1; rite/read one = the specific block is out of reset;
+/* [RW 32] reset reg#2; rite/read one = the specific block is out of reset;
write/read zero = the specific block is in reset; addr 0-wr- the write
value will be written to the register; addr 1-set - one will be written
to all the bits that have the value of one in the data written (bits that
@@ -1311,14 +1486,12 @@
written to all the bits that have the value of one in the data written
(bits that have the value of zero will not be change); addr 3-ignore;
read ignore from all addr except addr 00; inside order of the bits is:
- [0] rst_brb1; [1] rst_prs; [2] rst_src; [3] rst_tsdm; [4] rst_tsem; [5]
- rst_tcm; [6] rst_rbcr; [7] rst_nig; [8] rst_usdm; [9] rst_ucm; [10]
- rst_usem; [11] rst_upb; [12] rst_ccm; [13] rst_csem; [14] rst_csdm; [15]
- rst_rbcu; [16] rst_pbf; [17] rst_qm; [18] rst_tm; [19] rst_dorq; [20]
- rst_xcm; [21] rst_xsdm; [22] rst_xsem; [23] rst_rbct; [24] rst_cdu; [25]
- rst_cfc; [26] rst_pxp; [27] rst_pxpv; [28] rst_rbcp; [29] rst_hc; [30]
- rst_dmae; [31] rst_semi_rtc; */
-#define MISC_REG_RESET_REG_1 0xa580
+ [0] rst_bmac0; [1] rst_bmac1; [2] rst_emac0; [3] rst_emac1; [4] rst_grc;
+ [5] rst_mcp_n_reset_reg_hard_core; [6] rst_ mcp_n_hard_core_rst_b; [7]
+ rst_ mcp_n_reset_cmn_cpu; [8] rst_ mcp_n_reset_cmn_core; [9] rst_rbcn;
+ [10] rst_dbg; [11] rst_misc_core; [12] rst_dbue (UART); [13]
+ Pci_resetmdio_n; [14] rst_emac0_hard_core; [15] rst_emac1_hard_core; 16]
+ rst_pxp_rq_rd_wr; 31:17] reserved */
#define MISC_REG_RESET_REG_2 0xa590
/* [RW 20] 20 bit GRC address where the scratch-pad of the MCP that is
shared with the driver resides */
@@ -1345,7 +1518,7 @@
select VAUX supply. (This is an output pin only; it is not controlled by
the SET and CLR fields; it is controlled by the Main Power SM; the FLOAT
field is not applicable for this pin; only the VALUE fields is relevant -
- it reflects the output value); [3] reserved; [4] spio_4; [5] spio_5; [6]
+ it reflects the output value); [3] port swap [4] spio_4; [5] spio_5; [6]
Bit 0 of UMP device ID select; read by UMP firmware; [7] Bit 1 of UMP
device ID select; read by UMP firmware. */
#define MISC_REG_SPIO 0xa4fc
@@ -1394,8 +1567,9 @@
#define NIG_REG_BRB1_PAUSE_IN_EN 0x100c8
/* [RW 1] output enable for RX BRB1 LP IF */
#define NIG_REG_BRB_LB_OUT_EN 0x10100
-/* [WB_W 72] Debug packet to LP from RBC; Data spelling:[63:0] data; 64]
- error; [67:65]eop_bvalid; [68]eop; [69]sop; [70]port_id; 71]flush */
+/* [WB_W 82] Debug packet to LP from RBC; Data spelling:[63:0] data; 64]
+ error; [67:65]eop_bvalid; [68]eop; [69]sop; [70]port_id; 71]flush;
+ 72:73]-vnic_num; 81:74]-sideband_info */
#define NIG_REG_DEBUG_PACKET_LB 0x10800
/* [RW 1] Input enable for TX Debug packet */
#define NIG_REG_EGRESS_DEBUG_IN_EN 0x100dc
@@ -1409,6 +1583,8 @@
/* [RW 1] MAC configuration for packets of port0. If 1 - all packet outputs
to emac for port0; other way to bmac for port0 */
#define NIG_REG_EGRESS_EMAC0_PORT 0x10058
+/* [RW 32] TX_MNG_FIFO in NIG_TX_PORT0; data[31:0] written in FIFO order. */
+#define NIG_REG_EGRESS_MNG0_FIFO 0x1045c
/* [RW 1] Input enable for TX PBF user packet port0 IF */
#define NIG_REG_EGRESS_PBF0_IN_EN 0x100cc
/* [RW 1] Input enable for TX PBF user packet port1 IF */
@@ -1438,6 +1614,8 @@
#define NIG_REG_INGRESS_EOP_LB_FIFO 0x104e4
/* [RW 1] led 10g for port 0 */
#define NIG_REG_LED_10G_P0 0x10320
+/* [RW 1] led 10g for port 1 */
+#define NIG_REG_LED_10G_P1 0x10324
/* [RW 1] Port0: This bit is set to enable the use of the
~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 field
defined below. If this bit is cleared; then the blink rate will be about
@@ -1470,19 +1648,47 @@
/* [RW 4] led mode for port0: 0 MAC; 1-3 PHY1; 4 MAC2; 5-7 PHY4; 8-MAC3;
9-11PHY7; 12 MAC4; 13-15 PHY10; */
#define NIG_REG_LED_MODE_P0 0x102f0
+#define NIG_REG_LLH0_ACPI_PAT_0_CRC 0x1015c
+#define NIG_REG_LLH0_ACPI_PAT_6_LEN 0x10154
#define NIG_REG_LLH0_BRB1_DRV_MASK 0x10244
+#define NIG_REG_LLH0_BRB1_DRV_MASK_MF 0x16048
/* [RW 1] send to BRB1 if no match on any of RMP rules. */
#define NIG_REG_LLH0_BRB1_NOT_MCP 0x1025c
+/* [RW 2] Determine the classification participants. 0: no classification.1:
+ classification upon VLAN id. 2: classification upon MAC address. 3:
+ classification upon both VLAN id & MAC addr. */
+#define NIG_REG_LLH0_CLS_TYPE 0x16080
/* [RW 32] cm header for llh0 */
#define NIG_REG_LLH0_CM_HEADER 0x1007c
+#define NIG_REG_LLH0_DEST_IP_0_1 0x101dc
+#define NIG_REG_LLH0_DEST_MAC_0_0 0x101c0
+/* [RW 16] destination TCP address 1. The LLH will look for this address in
+ all incoming packets. */
+#define NIG_REG_LLH0_DEST_TCP_0 0x10220
+/* [RW 16] destination UDP address 1 The LLH will look for this address in
+ all incoming packets. */
+#define NIG_REG_LLH0_DEST_UDP_0 0x10214
#define NIG_REG_LLH0_ERROR_MASK 0x1008c
/* [RW 8] event id for llh0 */
#define NIG_REG_LLH0_EVENT_ID 0x10084
+#define NIG_REG_LLH0_FUNC_EN 0x160fc
+#define NIG_REG_LLH0_FUNC_VLAN_ID 0x16100
+/* [RW 1] Determine the IP version to look for in
+ ~nig_registers_llh0_dest_ip_0.llh0_dest_ip_0. 0 - IPv6; 1-IPv4 */
+#define NIG_REG_LLH0_IPV4_IPV6_0 0x10208
+/* [RW 1] t bit for llh0 */
+#define NIG_REG_LLH0_T_BIT 0x10074
+/* [RW 12] VLAN ID 1. In case of VLAN packet the LLH will look for this ID. */
+#define NIG_REG_LLH0_VLAN_ID_0 0x1022c
/* [RW 8] init credit counter for port0 in LLH */
#define NIG_REG_LLH0_XCM_INIT_CREDIT 0x10554
#define NIG_REG_LLH0_XCM_MASK 0x10130
/* [RW 1] send to BRB1 if no match on any of RMP rules. */
#define NIG_REG_LLH1_BRB1_NOT_MCP 0x102dc
+/* [RW 2] Determine the classification participants. 0: no classification.1:
+ classification upon VLAN id. 2: classification upon MAC address. 3:
+ classification upon both VLAN id & MAC addr. */
+#define NIG_REG_LLH1_CLS_TYPE 0x16084
/* [RW 32] cm header for llh1 */
#define NIG_REG_LLH1_CM_HEADER 0x10080
#define NIG_REG_LLH1_ERROR_MASK 0x10090
@@ -1491,13 +1697,26 @@
/* [RW 8] init credit counter for port1 in LLH */
#define NIG_REG_LLH1_XCM_INIT_CREDIT 0x10564
#define NIG_REG_LLH1_XCM_MASK 0x10134
+/* [RW 1] When this bit is set; the LLH will expect all packets to be with
+ e1hov */
+#define NIG_REG_LLH_E1HOV_MODE 0x160d8
+/* [RW 1] When this bit is set; the LLH will classify the packet before
+ sending it to the BRB or calculating WoL on it. */
+#define NIG_REG_LLH_MF_MODE 0x16024
#define NIG_REG_MASK_INTERRUPT_PORT0 0x10330
#define NIG_REG_MASK_INTERRUPT_PORT1 0x10334
/* [RW 1] Output signal from NIG to EMAC0. When set enables the EMAC0 block. */
#define NIG_REG_NIG_EMAC0_EN 0x1003c
+/* [RW 1] Output signal from NIG to EMAC1. When set enables the EMAC1 block. */
+#define NIG_REG_NIG_EMAC1_EN 0x10040
/* [RW 1] Output signal from NIG to TX_EMAC0. When set indicates to the
EMAC0 to strip the CRC from the ingress packets. */
#define NIG_REG_NIG_INGRESS_EMAC0_NO_CRC 0x10044
+/* [R 32] Interrupt register #0 read */
+#define NIG_REG_NIG_INT_STS_0 0x103b0
+#define NIG_REG_NIG_INT_STS_1 0x103c0
+/* [R 32] Parity register #0 read */
+#define NIG_REG_NIG_PRTY_STS 0x103d0
/* [RW 1] Input enable for RX PBF LP IF */
#define NIG_REG_PBF_LB_IN_EN 0x100b4
/* [RW 1] Value of this register will be transmitted to port swap when
@@ -1529,8 +1748,12 @@
#define NIG_REG_XCM0_OUT_EN 0x100f0
/* [RW 1] output enable for RX_XCM1 IF */
#define NIG_REG_XCM1_OUT_EN 0x100f4
+/* [RW 1] control to xgxs - remote PHY in-band MDIO */
+#define NIG_REG_XGXS0_CTRL_EXTREMOTEMDIOST 0x10348
/* [RW 5] control to xgxs - CL45 DEVAD */
#define NIG_REG_XGXS0_CTRL_MD_DEVAD 0x1033c
+/* [RW 1] control to xgxs; 0 - clause 45; 1 - clause 22 */
+#define NIG_REG_XGXS0_CTRL_MD_ST 0x10338
/* [RW 5] control to xgxs - CL22 PHY_ADD and CL45 PRTAD */
#define NIG_REG_XGXS0_CTRL_PHY_ADDR 0x10340
/* [R 1] status from xgxs0 that inputs to interrupt logic of link10g. */
@@ -1658,11 +1881,15 @@
#define PRS_REG_CM_HDR_TYPE_4 0x40088
/* [RW 32] The CM header in case there was not a match on the connection */
#define PRS_REG_CM_NO_MATCH_HDR 0x400b8
+/* [RW 1] Indicates if in e1hov mode. 0=non-e1hov mode; 1=e1hov mode. */
+#define PRS_REG_E1HOV_MODE 0x401c8
/* [RW 8] The 8-bit event ID for a match and packet type 1. Used in packet
start message to TCM. */
#define PRS_REG_EVENT_ID_1 0x40054
#define PRS_REG_EVENT_ID_2 0x40058
#define PRS_REG_EVENT_ID_3 0x4005c
+/* [RW 16] The Ethernet type value for FCoE */
+#define PRS_REG_FCOE_TYPE 0x401d0
/* [RW 8] Context region for flush packet with packet type 0. Used in CFC
load request message. */
#define PRS_REG_FLUSH_REGIONS_TYPE_0 0x40004
@@ -1732,6 +1959,11 @@
#define PXP2_REG_HST_HEADER_FIFO_STATUS 0x120478
#define PXP2_REG_PGL_CONTROL0 0x120490
#define PXP2_REG_PGL_CONTROL1 0x120514
+/* [RW 32] third dword data of expansion rom request. this register is
+ special. reading from it provides a vector outstanding read requests. if
+ a bit is zero it means that a read request on the corresponding tag did
+ not finish yet (not all completions have arrived for it) */
+#define PXP2_REG_PGL_EXP_ROM2 0x120808
/* [RW 32] Inbound interrupt table for CSDM: bits[31:16]-mask;
its[15:0]-address */
#define PXP2_REG_PGL_INT_CSDM_0 0x1204f4
@@ -1775,8 +2007,7 @@
/* [R 1] this bit indicates that a read request was blocked because of
bus_master_en was deasserted */
#define PXP2_REG_PGL_READ_BLOCKED 0x120568
-/* [R 6] debug only */
-#define PXP2_REG_PGL_TXR_CDTS 0x120528
+#define PXP2_REG_PGL_TAGS_LIMIT 0x1205a8
/* [R 18] debug only */
#define PXP2_REG_PGL_TXW_CDTS 0x12052c
/* [R 1] this bit indicates that a write request was blocked because of
@@ -1828,6 +2059,7 @@
#define PXP2_REG_PSWRQ_QM0_L2P 0x120038
#define PXP2_REG_PSWRQ_SRC0_L2P 0x120054
#define PXP2_REG_PSWRQ_TM0_L2P 0x12001c
+#define PXP2_REG_PSWRQ_TSDM0_L2P 0x1200e0
/* [RW 25] Interrupt mask register #0 read/write */
#define PXP2_REG_PXP2_INT_MASK 0x120578
/* [R 25] Interrupt register #0 read */
@@ -2016,8 +2248,12 @@
#define PXP2_REG_RQ_BW_WR_UBOUND29 0x1202a4
/* [RW 7] Bandwidth upper bound for VQ30 */
#define PXP2_REG_RQ_BW_WR_UBOUND30 0x1202a8
+/* [RW 18] external first_mem_addr field in L2P table for CDU module port 0 */
+#define PXP2_REG_RQ_CDU0_EFIRST_MEM_ADDR 0x120008
/* [RW 2] Endian mode for cdu */
#define PXP2_REG_RQ_CDU_ENDIAN_M 0x1201a0
+#define PXP2_REG_RQ_CDU_FIRST_ILT 0x12061c
+#define PXP2_REG_RQ_CDU_LAST_ILT 0x120620
/* [RW 3] page size in L2P table for CDU module; -4k; -8k; -16k; -32k; -64k;
-128k */
#define PXP2_REG_RQ_CDU_P_SIZE 0x120018
@@ -2029,14 +2265,26 @@
/* [RW 1] When '1'; requests will enter input buffers but wont get out
towards the glue */
#define PXP2_REG_RQ_DISABLE_INPUTS 0x120330
+/* [RW 1] 1 - SR will be aligned by 64B; 0 - SR will be aligned by 8B */
+#define PXP2_REG_RQ_DRAM_ALIGN 0x1205b0
+/* [RW 1] If 1 ILT failiue will not result in ELT access; An interrupt will
+ be asserted */
+#define PXP2_REG_RQ_ELT_DISABLE 0x12066c
/* [RW 2] Endian mode for hc */
#define PXP2_REG_RQ_HC_ENDIAN_M 0x1201a8
+/* [RW 1] when '0' ILT logic will work as in A0; otherwise B0; for back
+ compatibility needs; Note that different registers are used per mode */
+#define PXP2_REG_RQ_ILT_MODE 0x1205b4
/* [WB 53] Onchip address table */
#define PXP2_REG_RQ_ONCHIP_AT 0x122000
+/* [WB 53] Onchip address table - B0 */
+#define PXP2_REG_RQ_ONCHIP_AT_B0 0x128000
/* [RW 13] Pending read limiter threshold; in Dwords */
#define PXP2_REG_RQ_PDR_LIMIT 0x12033c
/* [RW 2] Endian mode for qm */
#define PXP2_REG_RQ_QM_ENDIAN_M 0x120194
+#define PXP2_REG_RQ_QM_FIRST_ILT 0x120634
+#define PXP2_REG_RQ_QM_LAST_ILT 0x120638
/* [RW 3] page size in L2P table for QM module; -4k; -8k; -16k; -32k; -64k;
-128k */
#define PXP2_REG_RQ_QM_P_SIZE 0x120050
@@ -2050,16 +2298,22 @@
#define PXP2_REG_RQ_RD_MBS1 0x120168
/* [RW 2] Endian mode for src */
#define PXP2_REG_RQ_SRC_ENDIAN_M 0x12019c
+#define PXP2_REG_RQ_SRC_FIRST_ILT 0x12063c
+#define PXP2_REG_RQ_SRC_LAST_ILT 0x120640
/* [RW 3] page size in L2P table for SRC module; -4k; -8k; -16k; -32k; -64k;
-128k */
#define PXP2_REG_RQ_SRC_P_SIZE 0x12006c
/* [RW 2] Endian mode for tm */
#define PXP2_REG_RQ_TM_ENDIAN_M 0x120198
+#define PXP2_REG_RQ_TM_FIRST_ILT 0x120644
+#define PXP2_REG_RQ_TM_LAST_ILT 0x120648
/* [RW 3] page size in L2P table for TM module; -4k; -8k; -16k; -32k; -64k;
-128k */
#define PXP2_REG_RQ_TM_P_SIZE 0x120034
/* [R 5] Number of entries in the ufifo; his fifo has l2p completions */
#define PXP2_REG_RQ_UFIFO_NUM_OF_ENTRY 0x12080c
+/* [RW 18] external first_mem_addr field in L2P table for USDM module port 0 */
+#define PXP2_REG_RQ_USDM0_EFIRST_MEM_ADDR 0x120094
/* [R 8] Number of entries occupied by vq 0 in pswrq memory */
#define PXP2_REG_RQ_VQ0_ENTRY_CNT 0x120810
/* [R 8] Number of entries occupied by vq 10 in pswrq memory */
@@ -2130,19 +2384,63 @@
/* [RW 3] Max burst size filed for write requests port 1; 000 - 128B;
001:256B; 010: 512B; */
#define PXP2_REG_RQ_WR_MBS1 0x120164
+/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
+ buffer reaches this number has_payload will be asserted */
+#define PXP2_REG_WR_CDU_MPS 0x1205f0
+/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
+ buffer reaches this number has_payload will be asserted */
+#define PXP2_REG_WR_CSDM_MPS 0x1205d0
+/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
+ buffer reaches this number has_payload will be asserted */
+#define PXP2_REG_WR_DBG_MPS 0x1205e8
+/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
+ buffer reaches this number has_payload will be asserted */
+#define PXP2_REG_WR_DMAE_MPS 0x1205ec
/* [RW 10] if Number of entries in dmae fifo will be higer than this
threshold then has_payload indication will be asserted; the default value
should be equal to &gt; write MBS size! */
#define PXP2_REG_WR_DMAE_TH 0x120368
+/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
+ buffer reaches this number has_payload will be asserted */
+#define PXP2_REG_WR_HC_MPS 0x1205c8
+/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
+ buffer reaches this number has_payload will be asserted */
+#define PXP2_REG_WR_QM_MPS 0x1205dc
+/* [RW 1] 0 - working in A0 mode; - working in B0 mode */
+#define PXP2_REG_WR_REV_MODE 0x120670
+/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
+ buffer reaches this number has_payload will be asserted */
+#define PXP2_REG_WR_SRC_MPS 0x1205e4
+/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
+ buffer reaches this number has_payload will be asserted */
+#define PXP2_REG_WR_TM_MPS 0x1205e0
+/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
+ buffer reaches this number has_payload will be asserted */
+#define PXP2_REG_WR_TSDM_MPS 0x1205d4
/* [RW 10] if Number of entries in usdmdp fifo will be higer than this
threshold then has_payload indication will be asserted; the default value
should be equal to &gt; write MBS size! */
#define PXP2_REG_WR_USDMDP_TH 0x120348
+/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
+ buffer reaches this number has_payload will be asserted */
+#define PXP2_REG_WR_USDM_MPS 0x1205cc
+/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
+ buffer reaches this number has_payload will be asserted */
+#define PXP2_REG_WR_XSDM_MPS 0x1205d8
/* [R 1] debug only: Indication if PSWHST arbiter is idle */
#define PXP_REG_HST_ARB_IS_IDLE 0x103004
/* [R 8] debug only: A bit mask for all PSWHST arbiter clients. '1' means
this client is waiting for the arbiter. */
#define PXP_REG_HST_CLIENTS_WAITING_TO_ARB 0x103008
+/* [R 1] debug only: '1' means this PSWHST is discarding doorbells. This bit
+ should update accoring to 'hst_discard_doorbells' register when the state
+ machine is idle */
+#define PXP_REG_HST_DISCARD_DOORBELLS_STATUS 0x1030a0
+/* [R 6] debug only: A bit mask for all PSWHST internal write clients. '1'
+ means this PSWHST is discarding inputs from this client. Each bit should
+ update accoring to 'hst_discard_internal_writes' register when the state
+ machine is idle. */
+#define PXP_REG_HST_DISCARD_INTERNAL_WRITES_STATUS 0x10309c
/* [WB 160] Used for initialization of the inbound interrupts memory */
#define PXP_REG_HST_INBOUND_INT 0x103800
/* [RW 32] Interrupt mask register #0 read/write */
@@ -2165,18 +2463,25 @@
#define QM_REG_ACTCTRINITVAL_3 0x16804c
/* [RW 32] The base logical address (in bytes) of each physical queue. The
index I represents the physical queue number. The 12 lsbs are ignore and
- considered zero so practically there are only 20 bits in this register. */
+ considered zero so practically there are only 20 bits in this register;
+ queues 63-0 */
#define QM_REG_BASEADDR 0x168900
/* [RW 16] The byte credit cost for each task. This value is for both ports */
#define QM_REG_BYTECRDCOST 0x168234
/* [RW 16] The initial byte credit value for both ports. */
#define QM_REG_BYTECRDINITVAL 0x168238
/* [RW 32] A bit per physical queue. If the bit is cleared then the physical
- queue uses port 0 else it uses port 1. */
+ queue uses port 0 else it uses port 1; queues 31-0 */
#define QM_REG_BYTECRDPORT_LSB 0x168228
/* [RW 32] A bit per physical queue. If the bit is cleared then the physical
- queue uses port 0 else it uses port 1. */
+ queue uses port 0 else it uses port 1; queues 95-64 */
+#define QM_REG_BYTECRDPORT_LSB_EXT_A 0x16e520
+/* [RW 32] A bit per physical queue. If the bit is cleared then the physical
+ queue uses port 0 else it uses port 1; queues 63-32 */
#define QM_REG_BYTECRDPORT_MSB 0x168224
+/* [RW 32] A bit per physical queue. If the bit is cleared then the physical
+ queue uses port 0 else it uses port 1; queues 127-96 */
+#define QM_REG_BYTECRDPORT_MSB_EXT_A 0x16e51c
/* [RW 16] The byte credit value that if above the QM is considered almost
full */
#define QM_REG_BYTECREDITAFULLTHR 0x168094
@@ -2203,7 +2508,7 @@
#define QM_REG_CMINTVOQMASK_6 0x16820c
#define QM_REG_CMINTVOQMASK_7 0x168210
/* [RW 20] The number of connections divided by 16 which dictates the size
- of each queue per port 0 */
+ of each queue which belongs to even function number. */
#define QM_REG_CONNNUM_0 0x168020
/* [R 6] Keep the fill level of the fifo from write client 4 */
#define QM_REG_CQM_WRC_FIFOLVL 0x168018
@@ -2216,74 +2521,179 @@
bypass enable */
#define QM_REG_ENBYPVOQMASK 0x16823c
/* [RW 32] A bit mask per each physical queue. If a bit is set then the
- physical queue uses the byte credit */
+ physical queue uses the byte credit; queues 31-0 */
#define QM_REG_ENBYTECRD_LSB 0x168220
/* [RW 32] A bit mask per each physical queue. If a bit is set then the
- physical queue uses the byte credit */
+ physical queue uses the byte credit; queues 95-64 */
+#define QM_REG_ENBYTECRD_LSB_EXT_A 0x16e518
+/* [RW 32] A bit mask per each physical queue. If a bit is set then the
+ physical queue uses the byte credit; queues 63-32 */
#define QM_REG_ENBYTECRD_MSB 0x16821c
+/* [RW 32] A bit mask per each physical queue. If a bit is set then the
+ physical queue uses the byte credit; queues 127-96 */
+#define QM_REG_ENBYTECRD_MSB_EXT_A 0x16e514
/* [RW 4] If cleared then the secondary interface will not be served by the
RR arbiter */
#define QM_REG_ENSEC 0x1680f0
-/* [RW 32] A bit vector per each physical queue which selects which function
- number to use on PCI access for that queue. */
+/* [RW 32] NA */
#define QM_REG_FUNCNUMSEL_LSB 0x168230
-/* [RW 32] A bit vector per each physical queue which selects which function
- number to use on PCI access for that queue. */
+/* [RW 32] NA */
#define QM_REG_FUNCNUMSEL_MSB 0x16822c
/* [RW 32] A mask register to mask the Almost empty signals which will not
- be use for the almost empty indication to the HW block */
+ be use for the almost empty indication to the HW block; queues 31:0 */
#define QM_REG_HWAEMPTYMASK_LSB 0x168218
/* [RW 32] A mask register to mask the Almost empty signals which will not
- be use for the almost empty indication to the HW block */
+ be use for the almost empty indication to the HW block; queues 95-64 */
+#define QM_REG_HWAEMPTYMASK_LSB_EXT_A 0x16e510
+/* [RW 32] A mask register to mask the Almost empty signals which will not
+ be use for the almost empty indication to the HW block; queues 63:32 */
#define QM_REG_HWAEMPTYMASK_MSB 0x168214
+/* [RW 32] A mask register to mask the Almost empty signals which will not
+ be use for the almost empty indication to the HW block; queues 127-96 */
+#define QM_REG_HWAEMPTYMASK_MSB_EXT_A 0x16e50c
/* [RW 4] The number of outstanding request to CFC */
#define QM_REG_OUTLDREQ 0x168804
/* [RC 1] A flag to indicate that overflow error occurred in one of the
queues. */
#define QM_REG_OVFERROR 0x16805c
-/* [RC 6] the Q were the qverflow occurs */
+/* [RC 7] the Q were the qverflow occurs */
#define QM_REG_OVFQNUM 0x168058
-/* [R 32] Pause state for physical queues 31-0 */
+/* [R 16] Pause state for physical queues 15-0 */
#define QM_REG_PAUSESTATE0 0x168410
-/* [R 32] Pause state for physical queues 64-32 */
+/* [R 16] Pause state for physical queues 31-16 */
#define QM_REG_PAUSESTATE1 0x168414
+/* [R 16] Pause state for physical queues 47-32 */
+#define QM_REG_PAUSESTATE2 0x16e684
+/* [R 16] Pause state for physical queues 63-48 */
+#define QM_REG_PAUSESTATE3 0x16e688
+/* [R 16] Pause state for physical queues 79-64 */
+#define QM_REG_PAUSESTATE4 0x16e68c
+/* [R 16] Pause state for physical queues 95-80 */
+#define QM_REG_PAUSESTATE5 0x16e690
+/* [R 16] Pause state for physical queues 111-96 */
+#define QM_REG_PAUSESTATE6 0x16e694
+/* [R 16] Pause state for physical queues 127-112 */
+#define QM_REG_PAUSESTATE7 0x16e698
/* [RW 2] The PCI attributes field used in the PCI request. */
#define QM_REG_PCIREQAT 0x168054
/* [R 16] The byte credit of port 0 */
#define QM_REG_PORT0BYTECRD 0x168300
/* [R 16] The byte credit of port 1 */
#define QM_REG_PORT1BYTECRD 0x168304
-/* [WB 54] Pointer Table Memory; The mapping is as follow: ptrtbl[53:30]
- read pointer; ptrtbl[29:6] write pointer; ptrtbl[5:4] read bank0;
- ptrtbl[3:2] read bank 1; ptrtbl[1:0] write bank; */
+/* [RW 3] pci function number of queues 15-0 */
+#define QM_REG_PQ2PCIFUNC_0 0x16e6bc
+#define QM_REG_PQ2PCIFUNC_1 0x16e6c0
+#define QM_REG_PQ2PCIFUNC_2 0x16e6c4
+#define QM_REG_PQ2PCIFUNC_3 0x16e6c8
+#define QM_REG_PQ2PCIFUNC_4 0x16e6cc
+#define QM_REG_PQ2PCIFUNC_5 0x16e6d0
+#define QM_REG_PQ2PCIFUNC_6 0x16e6d4
+#define QM_REG_PQ2PCIFUNC_7 0x16e6d8
+/* [WB 54] Pointer Table Memory for queues 63-0; The mapping is as follow:
+ ptrtbl[53:30] read pointer; ptrtbl[29:6] write pointer; ptrtbl[5:4] read
+ bank0; ptrtbl[3:2] read bank 1; ptrtbl[1:0] write bank; */
#define QM_REG_PTRTBL 0x168a00
+/* [WB 54] Pointer Table Memory for queues 127-64; The mapping is as follow:
+ ptrtbl[53:30] read pointer; ptrtbl[29:6] write pointer; ptrtbl[5:4] read
+ bank0; ptrtbl[3:2] read bank 1; ptrtbl[1:0] write bank; */
+#define QM_REG_PTRTBL_EXT_A 0x16e200
/* [RW 2] Interrupt mask register #0 read/write */
#define QM_REG_QM_INT_MASK 0x168444
/* [R 2] Interrupt register #0 read */
#define QM_REG_QM_INT_STS 0x168438
-/* [RW 9] Parity mask register #0 read/write */
+/* [RW 12] Parity mask register #0 read/write */
#define QM_REG_QM_PRTY_MASK 0x168454
-/* [R 9] Parity register #0 read */
+/* [R 12] Parity register #0 read */
#define QM_REG_QM_PRTY_STS 0x168448
/* [R 32] Current queues in pipeline: Queues from 32 to 63 */
#define QM_REG_QSTATUS_HIGH 0x16802c
+/* [R 32] Current queues in pipeline: Queues from 96 to 127 */
+#define QM_REG_QSTATUS_HIGH_EXT_A 0x16e408
/* [R 32] Current queues in pipeline: Queues from 0 to 31 */
#define QM_REG_QSTATUS_LOW 0x168028
-/* [R 24] The number of tasks queued for each queue */
+/* [R 32] Current queues in pipeline: Queues from 64 to 95 */
+#define QM_REG_QSTATUS_LOW_EXT_A 0x16e404
+/* [R 24] The number of tasks queued for each queue; queues 63-0 */
#define QM_REG_QTASKCTR_0 0x168308
+/* [R 24] The number of tasks queued for each queue; queues 127-64 */
+#define QM_REG_QTASKCTR_EXT_A_0 0x16e584
/* [RW 4] Queue tied to VOQ */
#define QM_REG_QVOQIDX_0 0x1680f4
#define QM_REG_QVOQIDX_10 0x16811c
+#define QM_REG_QVOQIDX_100 0x16e49c
+#define QM_REG_QVOQIDX_101 0x16e4a0
+#define QM_REG_QVOQIDX_102 0x16e4a4
+#define QM_REG_QVOQIDX_103 0x16e4a8
+#define QM_REG_QVOQIDX_104 0x16e4ac
+#define QM_REG_QVOQIDX_105 0x16e4b0
+#define QM_REG_QVOQIDX_106 0x16e4b4
+#define QM_REG_QVOQIDX_107 0x16e4b8
+#define QM_REG_QVOQIDX_108 0x16e4bc
+#define QM_REG_QVOQIDX_109 0x16e4c0
+#define QM_REG_QVOQIDX_100 0x16e49c
+#define QM_REG_QVOQIDX_101 0x16e4a0
+#define QM_REG_QVOQIDX_102 0x16e4a4
+#define QM_REG_QVOQIDX_103 0x16e4a8
+#define QM_REG_QVOQIDX_104 0x16e4ac
+#define QM_REG_QVOQIDX_105 0x16e4b0
+#define QM_REG_QVOQIDX_106 0x16e4b4
+#define QM_REG_QVOQIDX_107 0x16e4b8
+#define QM_REG_QVOQIDX_108 0x16e4bc
+#define QM_REG_QVOQIDX_109 0x16e4c0
#define QM_REG_QVOQIDX_11 0x168120
+#define QM_REG_QVOQIDX_110 0x16e4c4
+#define QM_REG_QVOQIDX_111 0x16e4c8
+#define QM_REG_QVOQIDX_112 0x16e4cc
+#define QM_REG_QVOQIDX_113 0x16e4d0
+#define QM_REG_QVOQIDX_114 0x16e4d4
+#define QM_REG_QVOQIDX_115 0x16e4d8
+#define QM_REG_QVOQIDX_116 0x16e4dc
+#define QM_REG_QVOQIDX_117 0x16e4e0
+#define QM_REG_QVOQIDX_118 0x16e4e4
+#define QM_REG_QVOQIDX_119 0x16e4e8
+#define QM_REG_QVOQIDX_110 0x16e4c4
+#define QM_REG_QVOQIDX_111 0x16e4c8
+#define QM_REG_QVOQIDX_112 0x16e4cc
+#define QM_REG_QVOQIDX_113 0x16e4d0
+#define QM_REG_QVOQIDX_114 0x16e4d4
+#define QM_REG_QVOQIDX_115 0x16e4d8
+#define QM_REG_QVOQIDX_116 0x16e4dc
+#define QM_REG_QVOQIDX_117 0x16e4e0
+#define QM_REG_QVOQIDX_118 0x16e4e4
+#define QM_REG_QVOQIDX_119 0x16e4e8
#define QM_REG_QVOQIDX_12 0x168124
+#define QM_REG_QVOQIDX_120 0x16e4ec
+#define QM_REG_QVOQIDX_121 0x16e4f0
+#define QM_REG_QVOQIDX_122 0x16e4f4
+#define QM_REG_QVOQIDX_123 0x16e4f8
+#define QM_REG_QVOQIDX_124 0x16e4fc
+#define QM_REG_QVOQIDX_125 0x16e500
+#define QM_REG_QVOQIDX_126 0x16e504
+#define QM_REG_QVOQIDX_127 0x16e508
+#define QM_REG_QVOQIDX_120 0x16e4ec
+#define QM_REG_QVOQIDX_121 0x16e4f0
+#define QM_REG_QVOQIDX_122 0x16e4f4
+#define QM_REG_QVOQIDX_123 0x16e4f8
+#define QM_REG_QVOQIDX_124 0x16e4fc
+#define QM_REG_QVOQIDX_125 0x16e500
+#define QM_REG_QVOQIDX_126 0x16e504
+#define QM_REG_QVOQIDX_127 0x16e508
#define QM_REG_QVOQIDX_13 0x168128
#define QM_REG_QVOQIDX_14 0x16812c
#define QM_REG_QVOQIDX_15 0x168130
#define QM_REG_QVOQIDX_16 0x168134
#define QM_REG_QVOQIDX_17 0x168138
#define QM_REG_QVOQIDX_21 0x168148
+#define QM_REG_QVOQIDX_22 0x16814c
+#define QM_REG_QVOQIDX_23 0x168150
+#define QM_REG_QVOQIDX_24 0x168154
#define QM_REG_QVOQIDX_25 0x168158
+#define QM_REG_QVOQIDX_26 0x16815c
+#define QM_REG_QVOQIDX_27 0x168160
+#define QM_REG_QVOQIDX_28 0x168164
#define QM_REG_QVOQIDX_29 0x168168
+#define QM_REG_QVOQIDX_30 0x16816c
+#define QM_REG_QVOQIDX_31 0x168170
#define QM_REG_QVOQIDX_32 0x168174
#define QM_REG_QVOQIDX_33 0x168178
#define QM_REG_QVOQIDX_34 0x16817c
@@ -2328,17 +2738,95 @@
#define QM_REG_QVOQIDX_61 0x1681e8
#define QM_REG_QVOQIDX_62 0x1681ec
#define QM_REG_QVOQIDX_63 0x1681f0
+#define QM_REG_QVOQIDX_64 0x16e40c
+#define QM_REG_QVOQIDX_65 0x16e410
+#define QM_REG_QVOQIDX_66 0x16e414
+#define QM_REG_QVOQIDX_67 0x16e418
+#define QM_REG_QVOQIDX_68 0x16e41c
+#define QM_REG_QVOQIDX_69 0x16e420
#define QM_REG_QVOQIDX_60 0x1681e4
#define QM_REG_QVOQIDX_61 0x1681e8
#define QM_REG_QVOQIDX_62 0x1681ec
#define QM_REG_QVOQIDX_63 0x1681f0
+#define QM_REG_QVOQIDX_64 0x16e40c
+#define QM_REG_QVOQIDX_65 0x16e410
+#define QM_REG_QVOQIDX_69 0x16e420
#define QM_REG_QVOQIDX_7 0x168110
+#define QM_REG_QVOQIDX_70 0x16e424
+#define QM_REG_QVOQIDX_71 0x16e428
+#define QM_REG_QVOQIDX_72 0x16e42c
+#define QM_REG_QVOQIDX_73 0x16e430
+#define QM_REG_QVOQIDX_74 0x16e434
+#define QM_REG_QVOQIDX_75 0x16e438
+#define QM_REG_QVOQIDX_76 0x16e43c
+#define QM_REG_QVOQIDX_77 0x16e440
+#define QM_REG_QVOQIDX_78 0x16e444
+#define QM_REG_QVOQIDX_79 0x16e448
+#define QM_REG_QVOQIDX_70 0x16e424
+#define QM_REG_QVOQIDX_71 0x16e428
+#define QM_REG_QVOQIDX_72 0x16e42c
+#define QM_REG_QVOQIDX_73 0x16e430
+#define QM_REG_QVOQIDX_74 0x16e434
+#define QM_REG_QVOQIDX_75 0x16e438
+#define QM_REG_QVOQIDX_76 0x16e43c
+#define QM_REG_QVOQIDX_77 0x16e440
+#define QM_REG_QVOQIDX_78 0x16e444
+#define QM_REG_QVOQIDX_79 0x16e448
#define QM_REG_QVOQIDX_8 0x168114
+#define QM_REG_QVOQIDX_80 0x16e44c
+#define QM_REG_QVOQIDX_81 0x16e450
+#define QM_REG_QVOQIDX_82 0x16e454
+#define QM_REG_QVOQIDX_83 0x16e458
+#define QM_REG_QVOQIDX_84 0x16e45c
+#define QM_REG_QVOQIDX_85 0x16e460
+#define QM_REG_QVOQIDX_86 0x16e464
+#define QM_REG_QVOQIDX_87 0x16e468
+#define QM_REG_QVOQIDX_88 0x16e46c
+#define QM_REG_QVOQIDX_89 0x16e470
+#define QM_REG_QVOQIDX_80 0x16e44c
+#define QM_REG_QVOQIDX_81 0x16e450
+#define QM_REG_QVOQIDX_85 0x16e460
+#define QM_REG_QVOQIDX_86 0x16e464
+#define QM_REG_QVOQIDX_87 0x16e468
+#define QM_REG_QVOQIDX_88 0x16e46c
+#define QM_REG_QVOQIDX_89 0x16e470
#define QM_REG_QVOQIDX_9 0x168118
-/* [R 24] Remaining pause timeout for port 0 */
+#define QM_REG_QVOQIDX_90 0x16e474
+#define QM_REG_QVOQIDX_91 0x16e478
+#define QM_REG_QVOQIDX_92 0x16e47c
+#define QM_REG_QVOQIDX_93 0x16e480
+#define QM_REG_QVOQIDX_94 0x16e484
+#define QM_REG_QVOQIDX_95 0x16e488
+#define QM_REG_QVOQIDX_96 0x16e48c
+#define QM_REG_QVOQIDX_97 0x16e490
+#define QM_REG_QVOQIDX_98 0x16e494
+#define QM_REG_QVOQIDX_99 0x16e498
+#define QM_REG_QVOQIDX_90 0x16e474
+#define QM_REG_QVOQIDX_91 0x16e478
+#define QM_REG_QVOQIDX_92 0x16e47c
+#define QM_REG_QVOQIDX_93 0x16e480
+#define QM_REG_QVOQIDX_94 0x16e484
+#define QM_REG_QVOQIDX_95 0x16e488
+#define QM_REG_QVOQIDX_96 0x16e48c
+#define QM_REG_QVOQIDX_97 0x16e490
+#define QM_REG_QVOQIDX_98 0x16e494
+#define QM_REG_QVOQIDX_99 0x16e498
+/* [R 24] Remaining pause timeout for queues 15-0 */
#define QM_REG_REMAINPAUSETM0 0x168418
-/* [R 24] Remaining pause timeout for port 1 */
+/* [R 24] Remaining pause timeout for queues 31-16 */
#define QM_REG_REMAINPAUSETM1 0x16841c
+/* [R 24] Remaining pause timeout for queues 47-32 */
+#define QM_REG_REMAINPAUSETM2 0x16e69c
+/* [R 24] Remaining pause timeout for queues 63-48 */
+#define QM_REG_REMAINPAUSETM3 0x16e6a0
+/* [R 24] Remaining pause timeout for queues 79-64 */
+#define QM_REG_REMAINPAUSETM4 0x16e6a4
+/* [R 24] Remaining pause timeout for queues 95-80 */
+#define QM_REG_REMAINPAUSETM5 0x16e6a8
+/* [R 24] Remaining pause timeout for queues 111-96 */
+#define QM_REG_REMAINPAUSETM6 0x16e6ac
+/* [R 24] Remaining pause timeout for queues 127-112 */
+#define QM_REG_REMAINPAUSETM7 0x16e6b0
/* [RW 1] Initialization bit command */
#define QM_REG_SOFT_RESET 0x168428
/* [RW 8] The credit cost per every task in the QM. A value per each VOQ */
@@ -2372,44 +2860,103 @@
#define QM_REG_VOQINITCREDIT_4 0x168070
#define QM_REG_VOQINITCREDIT_5 0x168074
/* [RW 1] The port of which VOQ belongs */
+#define QM_REG_VOQPORT_0 0x1682a0
#define QM_REG_VOQPORT_1 0x1682a4
#define QM_REG_VOQPORT_10 0x1682c8
#define QM_REG_VOQPORT_11 0x1682cc
#define QM_REG_VOQPORT_2 0x1682a8
-/* [RW 32] The physical queue number associated with each VOQ */
+/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
#define QM_REG_VOQQMASK_0_LSB 0x168240
-/* [RW 32] The physical queue number associated with each VOQ */
+/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
+#define QM_REG_VOQQMASK_0_LSB_EXT_A 0x16e524
+/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
#define QM_REG_VOQQMASK_0_MSB 0x168244
-/* [RW 32] The physical queue number associated with each VOQ */
+/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
+#define QM_REG_VOQQMASK_0_MSB_EXT_A 0x16e528
+/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
+#define QM_REG_VOQQMASK_10_LSB 0x168290
+/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
+#define QM_REG_VOQQMASK_10_LSB_EXT_A 0x16e574
+/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
+#define QM_REG_VOQQMASK_10_MSB 0x168294
+/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
+#define QM_REG_VOQQMASK_10_MSB_EXT_A 0x16e578
+/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
+#define QM_REG_VOQQMASK_11_LSB 0x168298
+/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
+#define QM_REG_VOQQMASK_11_LSB_EXT_A 0x16e57c
+/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
+#define QM_REG_VOQQMASK_11_MSB 0x16829c
+/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
+#define QM_REG_VOQQMASK_11_MSB_EXT_A 0x16e580
+/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
+#define QM_REG_VOQQMASK_1_LSB 0x168248
+/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
+#define QM_REG_VOQQMASK_1_LSB_EXT_A 0x16e52c
+/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
#define QM_REG_VOQQMASK_1_MSB 0x16824c
-/* [RW 32] The physical queue number associated with each VOQ */
+/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
+#define QM_REG_VOQQMASK_1_MSB_EXT_A 0x16e530
+/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
#define QM_REG_VOQQMASK_2_LSB 0x168250
-/* [RW 32] The physical queue number associated with each VOQ */
+/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
+#define QM_REG_VOQQMASK_2_LSB_EXT_A 0x16e534
+/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
#define QM_REG_VOQQMASK_2_MSB 0x168254
-/* [RW 32] The physical queue number associated with each VOQ */
+/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
+#define QM_REG_VOQQMASK_2_MSB_EXT_A 0x16e538
+/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
#define QM_REG_VOQQMASK_3_LSB 0x168258
-/* [RW 32] The physical queue number associated with each VOQ */
+/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
+#define QM_REG_VOQQMASK_3_LSB_EXT_A 0x16e53c
+/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
+#define QM_REG_VOQQMASK_3_MSB_EXT_A 0x16e540
+/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
#define QM_REG_VOQQMASK_4_LSB 0x168260
-/* [RW 32] The physical queue number associated with each VOQ */
+/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
+#define QM_REG_VOQQMASK_4_LSB_EXT_A 0x16e544
+/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
#define QM_REG_VOQQMASK_4_MSB 0x168264
-/* [RW 32] The physical queue number associated with each VOQ */
+/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
+#define QM_REG_VOQQMASK_4_MSB_EXT_A 0x16e548
+/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
#define QM_REG_VOQQMASK_5_LSB 0x168268
-/* [RW 32] The physical queue number associated with each VOQ */
+/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
+#define QM_REG_VOQQMASK_5_LSB_EXT_A 0x16e54c
+/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
#define QM_REG_VOQQMASK_5_MSB 0x16826c
-/* [RW 32] The physical queue number associated with each VOQ */
+/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
+#define QM_REG_VOQQMASK_5_MSB_EXT_A 0x16e550
+/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
#define QM_REG_VOQQMASK_6_LSB 0x168270
-/* [RW 32] The physical queue number associated with each VOQ */
+/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
+#define QM_REG_VOQQMASK_6_LSB_EXT_A 0x16e554
+/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
#define QM_REG_VOQQMASK_6_MSB 0x168274
-/* [RW 32] The physical queue number associated with each VOQ */
+/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
+#define QM_REG_VOQQMASK_6_MSB_EXT_A 0x16e558
+/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
#define QM_REG_VOQQMASK_7_LSB 0x168278
-/* [RW 32] The physical queue number associated with each VOQ */
+/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
+#define QM_REG_VOQQMASK_7_LSB_EXT_A 0x16e55c
+/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
#define QM_REG_VOQQMASK_7_MSB 0x16827c
-/* [RW 32] The physical queue number associated with each VOQ */
+/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
+#define QM_REG_VOQQMASK_7_MSB_EXT_A 0x16e560
+/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
#define QM_REG_VOQQMASK_8_LSB 0x168280
-/* [RW 32] The physical queue number associated with each VOQ */
+/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
+#define QM_REG_VOQQMASK_8_LSB_EXT_A 0x16e564
+/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
#define QM_REG_VOQQMASK_8_MSB 0x168284
-/* [RW 32] The physical queue number associated with each VOQ */
+/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
+#define QM_REG_VOQQMASK_8_MSB_EXT_A 0x16e568
+/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
#define QM_REG_VOQQMASK_9_LSB 0x168288
+/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
+#define QM_REG_VOQQMASK_9_LSB_EXT_A 0x16e56c
+/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
+#define QM_REG_VOQQMASK_9_MSB_EXT_A 0x16e570
/* [RW 32] Wrr weights */
#define QM_REG_WRRWEIGHTS_0 0x16880c
#define QM_REG_WRRWEIGHTS_1 0x168810
@@ -2431,14 +2978,78 @@
#define QM_REG_WRRWEIGHTS_15 0x168828
#define QM_REG_WRRWEIGHTS_15_SIZE 1
/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_16 0x16e000
+#define QM_REG_WRRWEIGHTS_16_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_17 0x16e004
+#define QM_REG_WRRWEIGHTS_17_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_18 0x16e008
+#define QM_REG_WRRWEIGHTS_18_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_19 0x16e00c
+#define QM_REG_WRRWEIGHTS_19_SIZE 1
+/* [RW 32] Wrr weights */
#define QM_REG_WRRWEIGHTS_10 0x168814
#define QM_REG_WRRWEIGHTS_11 0x168818
#define QM_REG_WRRWEIGHTS_12 0x16881c
#define QM_REG_WRRWEIGHTS_13 0x168820
#define QM_REG_WRRWEIGHTS_14 0x168824
#define QM_REG_WRRWEIGHTS_15 0x168828
+#define QM_REG_WRRWEIGHTS_16 0x16e000
+#define QM_REG_WRRWEIGHTS_17 0x16e004
+#define QM_REG_WRRWEIGHTS_18 0x16e008
+#define QM_REG_WRRWEIGHTS_19 0x16e00c
#define QM_REG_WRRWEIGHTS_2 0x16882c
+#define QM_REG_WRRWEIGHTS_20 0x16e010
+#define QM_REG_WRRWEIGHTS_20_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_21 0x16e014
+#define QM_REG_WRRWEIGHTS_21_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_22 0x16e018
+#define QM_REG_WRRWEIGHTS_22_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_23 0x16e01c
+#define QM_REG_WRRWEIGHTS_23_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_24 0x16e020
+#define QM_REG_WRRWEIGHTS_24_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_25 0x16e024
+#define QM_REG_WRRWEIGHTS_25_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_26 0x16e028
+#define QM_REG_WRRWEIGHTS_26_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_27 0x16e02c
+#define QM_REG_WRRWEIGHTS_27_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_28 0x16e030
+#define QM_REG_WRRWEIGHTS_28_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_29 0x16e034
+#define QM_REG_WRRWEIGHTS_29_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_20 0x16e010
+#define QM_REG_WRRWEIGHTS_21 0x16e014
+#define QM_REG_WRRWEIGHTS_22 0x16e018
+#define QM_REG_WRRWEIGHTS_23 0x16e01c
+#define QM_REG_WRRWEIGHTS_24 0x16e020
+#define QM_REG_WRRWEIGHTS_25 0x16e024
+#define QM_REG_WRRWEIGHTS_26 0x16e028
+#define QM_REG_WRRWEIGHTS_27 0x16e02c
+#define QM_REG_WRRWEIGHTS_28 0x16e030
+#define QM_REG_WRRWEIGHTS_29 0x16e034
#define QM_REG_WRRWEIGHTS_3 0x168830
+#define QM_REG_WRRWEIGHTS_30 0x16e038
+#define QM_REG_WRRWEIGHTS_30_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_31 0x16e03c
+#define QM_REG_WRRWEIGHTS_31_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_30 0x16e038
+#define QM_REG_WRRWEIGHTS_31 0x16e03c
#define QM_REG_WRRWEIGHTS_4 0x168834
#define QM_REG_WRRWEIGHTS_5 0x168838
#define QM_REG_WRRWEIGHTS_6 0x16883c
@@ -2447,6 +3058,70 @@
#define QM_REG_WRRWEIGHTS_9 0x168848
/* [R 6] Keep the fill level of the fifo from write client 1 */
#define QM_REG_XQM_WRC_FIFOLVL 0x168000
+#define BRB1_BRB1_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
+#define BRB1_BRB1_INT_STS_REG_ADDRESS_ERROR_SIZE 0
+#define BRB1_BRB1_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
+#define BRB1_BRB1_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
+#define BRB1_BRB1_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
+#define BRB1_BRB1_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
+#define BRB1_BRB1_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
+#define BRB1_BRB1_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
+#define CCM_CCM_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
+#define CCM_CCM_INT_STS_REG_ADDRESS_ERROR_SIZE 0
+#define CCM_CCM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
+#define CCM_CCM_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
+#define CCM_CCM_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
+#define CCM_CCM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
+#define CCM_CCM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
+#define CCM_CCM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
+#define CDU_CDU_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
+#define CDU_CDU_INT_STS_REG_ADDRESS_ERROR_SIZE 0
+#define CDU_CDU_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
+#define CDU_CDU_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
+#define CDU_CDU_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
+#define CDU_CDU_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
+#define CDU_CDU_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
+#define CDU_CDU_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
+#define CFC_CFC_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
+#define CFC_CFC_INT_STS_REG_ADDRESS_ERROR_SIZE 0
+#define CFC_CFC_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
+#define CFC_CFC_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
+#define CFC_CFC_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
+#define CFC_CFC_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
+#define CFC_CFC_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
+#define CFC_CFC_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
+#define CSDM_CSDM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
+#define CSDM_CSDM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
+#define CSDM_CSDM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
+#define CSDM_CSDM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
+#define CSDM_CSDM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
+#define CSDM_CSDM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
+#define CSDM_CSDM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
+#define CSDM_CSDM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
+#define CSEM_CSEM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
+#define CSEM_CSEM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
+#define CSEM_CSEM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
+#define CSEM_CSEM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
+#define CSEM_CSEM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
+#define CSEM_CSEM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
+#define CSEM_CSEM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
+#define CSEM_CSEM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
+#define DBG_DBG_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
+#define DBG_DBG_INT_STS_REG_ADDRESS_ERROR_SIZE 0
+#define DBG_DBG_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
+#define DBG_DBG_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
+#define DBG_DBG_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
+#define DBG_DBG_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
+#define DBG_DBG_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
+#define DBG_DBG_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
+#define DMAE_DMAE_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
+#define DMAE_DMAE_INT_STS_REG_ADDRESS_ERROR_SIZE 0
+#define DMAE_DMAE_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
+#define DMAE_DMAE_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
+#define DMAE_DMAE_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
+#define DMAE_DMAE_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
+#define DMAE_DMAE_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
+#define DMAE_DMAE_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
#define DORQ_DORQ_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
#define DORQ_DORQ_INT_STS_REG_ADDRESS_ERROR_SIZE 0
#define DORQ_DORQ_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
@@ -2455,6 +3130,22 @@
#define DORQ_DORQ_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
#define DORQ_DORQ_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
#define DORQ_DORQ_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
+#define HC_HC_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
+#define HC_HC_INT_STS_REG_ADDRESS_ERROR_SIZE 0
+#define HC_HC_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
+#define HC_HC_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
+#define HC_HC_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
+#define HC_HC_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
+#define HC_HC_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
+#define HC_HC_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
+#define MISC_MISC_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
+#define MISC_MISC_INT_STS_REG_ADDRESS_ERROR_SIZE 0
+#define MISC_MISC_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
+#define MISC_MISC_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
+#define MISC_MISC_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
+#define MISC_MISC_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
+#define MISC_MISC_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
+#define MISC_MISC_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
#define NIG_NIG_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
#define NIG_NIG_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
#define NIG_NIG_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
@@ -2463,6 +3154,70 @@
#define NIG_NIG_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
#define NIG_NIG_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
#define NIG_NIG_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
+#define PBF_PBF_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
+#define PBF_PBF_INT_STS_REG_ADDRESS_ERROR_SIZE 0
+#define PBF_PBF_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
+#define PBF_PBF_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
+#define PBF_PBF_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
+#define PBF_PBF_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
+#define PBF_PBF_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
+#define PBF_PBF_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
+#define PB_PB_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
+#define PB_PB_INT_STS_REG_ADDRESS_ERROR_SIZE 0
+#define PB_PB_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
+#define PB_PB_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
+#define PB_PB_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
+#define PB_PB_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
+#define PB_PB_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
+#define PB_PB_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
+#define PRS_PRS_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
+#define PRS_PRS_INT_STS_REG_ADDRESS_ERROR_SIZE 0
+#define PRS_PRS_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
+#define PRS_PRS_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
+#define PRS_PRS_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
+#define PRS_PRS_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
+#define PRS_PRS_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
+#define PRS_PRS_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
+#define PXP2_PXP2_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
+#define PXP2_PXP2_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
+#define PXP2_PXP2_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
+#define PXP2_PXP2_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
+#define PXP2_PXP2_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
+#define PXP2_PXP2_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
+#define PXP2_PXP2_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
+#define PXP2_PXP2_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
+#define PXP_PXP_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
+#define PXP_PXP_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
+#define PXP_PXP_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
+#define PXP_PXP_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
+#define PXP_PXP_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
+#define PXP_PXP_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
+#define PXP_PXP_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
+#define PXP_PXP_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
+#define QM_QM_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
+#define QM_QM_INT_STS_REG_ADDRESS_ERROR_SIZE 0
+#define QM_QM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
+#define QM_QM_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
+#define QM_QM_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
+#define QM_QM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
+#define QM_QM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
+#define QM_QM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
+#define SEM_FAST_SEM_FAST_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
+#define SEM_FAST_SEM_FAST_INT_STS_REG_ADDRESS_ERROR_SIZE 0
+#define SEM_FAST_SEM_FAST_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
+#define SEM_FAST_SEM_FAST_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
+#define SEM_FAST_SEM_FAST_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
+#define SEM_FAST_SEM_FAST_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
+#define SEM_FAST_SEM_FAST_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
+#define SEM_FAST_SEM_FAST_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
+#define SRC_SRC_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
+#define SRC_SRC_INT_STS_REG_ADDRESS_ERROR_SIZE 0
+#define SRC_SRC_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
+#define SRC_SRC_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
+#define SRC_SRC_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
+#define SRC_SRC_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
+#define SRC_SRC_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
+#define SRC_SRC_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
#define TCM_TCM_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
#define TCM_TCM_INT_STS_REG_ADDRESS_ERROR_SIZE 0
#define TCM_TCM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
@@ -2471,6 +3226,78 @@
#define TCM_TCM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
#define TCM_TCM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
#define TCM_TCM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
+#define TM_TM_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
+#define TM_TM_INT_STS_REG_ADDRESS_ERROR_SIZE 0
+#define TM_TM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
+#define TM_TM_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
+#define TM_TM_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
+#define TM_TM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
+#define TM_TM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
+#define TM_TM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
+#define TSDM_TSDM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
+#define TSDM_TSDM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
+#define TSDM_TSDM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
+#define TSDM_TSDM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
+#define TSDM_TSDM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
+#define TSDM_TSDM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
+#define TSDM_TSDM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
+#define TSDM_TSDM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
+#define TSEM_TSEM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
+#define TSEM_TSEM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
+#define TSEM_TSEM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
+#define TSEM_TSEM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
+#define TSEM_TSEM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
+#define TSEM_TSEM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
+#define TSEM_TSEM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
+#define TSEM_TSEM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
+#define UCM_UCM_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
+#define UCM_UCM_INT_STS_REG_ADDRESS_ERROR_SIZE 0
+#define UCM_UCM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
+#define UCM_UCM_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
+#define UCM_UCM_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
+#define UCM_UCM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
+#define UCM_UCM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
+#define UCM_UCM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
+#define USDM_USDM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
+#define USDM_USDM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
+#define USDM_USDM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
+#define USDM_USDM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
+#define USDM_USDM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
+#define USDM_USDM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
+#define USDM_USDM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
+#define USDM_USDM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
+#define USEM_USEM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
+#define USEM_USEM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
+#define USEM_USEM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
+#define USEM_USEM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
+#define USEM_USEM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
+#define USEM_USEM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
+#define USEM_USEM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
+#define USEM_USEM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
+#define XCM_XCM_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
+#define XCM_XCM_INT_STS_REG_ADDRESS_ERROR_SIZE 0
+#define XCM_XCM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
+#define XCM_XCM_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
+#define XCM_XCM_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
+#define XCM_XCM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
+#define XCM_XCM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
+#define XCM_XCM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
+#define XSDM_XSDM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
+#define XSDM_XSDM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
+#define XSDM_XSDM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
+#define XSDM_XSDM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
+#define XSDM_XSDM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
+#define XSDM_XSDM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
+#define XSDM_XSDM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
+#define XSDM_XSDM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
+#define XSEM_XSEM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
+#define XSEM_XSEM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
+#define XSEM_XSEM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
+#define XSEM_XSEM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
+#define XSEM_XSEM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
+#define XSEM_XSEM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
+#define XSEM_XSEM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
+#define XSEM_XSEM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
#define CFC_DEBUG1_REG_WRITE_AC (0x1<<4)
#define CFC_DEBUG1_REG_WRITE_AC_SIZE 4
/* [R 1] debug only: This bit indicates wheter indicates that external
@@ -2483,6 +3310,14 @@
~dbg_registers_debug_target=0 (internal buffer) */
#define DBG_REG_WRAP_ON_INT_BUFFER 0xc128
#define DBG_REG_WRAP_ON_INT_BUFFER_SIZE 1
+#define QM_QM_PRTY_STS_REG_WRBUFF (0x1<<8)
+#define QM_QM_PRTY_STS_REG_WRBUFF_SIZE 8
+#define QM_QM_PRTY_STS_CLR_REG_WRBUFF (0x1<<8)
+#define QM_QM_PRTY_STS_CLR_REG_WRBUFF_SIZE 8
+#define QM_QM_PRTY_STS_WR_REG_WRBUFF (0x1<<8)
+#define QM_QM_PRTY_STS_WR_REG_WRBUFF_SIZE 8
+#define QM_QM_PRTY_MASK_REG_WRBUFF (0x1<<8)
+#define QM_QM_PRTY_MASK_REG_WRBUFF_SIZE 8
/* [RW 32] Wrr weights */
#define QM_REG_WRRWEIGHTS_0 0x16880c
#define QM_REG_WRRWEIGHTS_0_SIZE 1
@@ -2531,20 +3366,67 @@
/* [RW 32] Wrr weights */
#define QM_REG_WRRWEIGHTS_9 0x168848
#define QM_REG_WRRWEIGHTS_9_SIZE 1
-/* [RW 22] Number of free element in the free list of T2 entries - port 0. */
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_16 0x16e000
+#define QM_REG_WRRWEIGHTS_16_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_17 0x16e004
+#define QM_REG_WRRWEIGHTS_17_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_18 0x16e008
+#define QM_REG_WRRWEIGHTS_18_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_19 0x16e00c
+#define QM_REG_WRRWEIGHTS_19_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_20 0x16e010
+#define QM_REG_WRRWEIGHTS_20_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_21 0x16e014
+#define QM_REG_WRRWEIGHTS_21_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_22 0x16e018
+#define QM_REG_WRRWEIGHTS_22_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_23 0x16e01c
+#define QM_REG_WRRWEIGHTS_23_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_24 0x16e020
+#define QM_REG_WRRWEIGHTS_24_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_25 0x16e024
+#define QM_REG_WRRWEIGHTS_25_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_26 0x16e028
+#define QM_REG_WRRWEIGHTS_26_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_27 0x16e02c
+#define QM_REG_WRRWEIGHTS_27_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_28 0x16e030
+#define QM_REG_WRRWEIGHTS_28_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_29 0x16e034
+#define QM_REG_WRRWEIGHTS_29_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_30 0x16e038
+#define QM_REG_WRRWEIGHTS_30_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_31 0x16e03c
+#define QM_REG_WRRWEIGHTS_31_SIZE 1
#define SRC_REG_COUNTFREE0 0x40500
-/* [WB 64] First free element in the free list of T2 entries - port 0. */
+/* [RW 1] If clr the searcher is compatible to E1 A0 - support only two
+ ports. If set the searcher support 8 functions. */
+#define SRC_REG_E1HMF_ENABLE 0x404cc
#define SRC_REG_FIRSTFREE0 0x40510
#define SRC_REG_KEYRSS0_0 0x40408
+#define SRC_REG_KEYRSS0_7 0x40424
#define SRC_REG_KEYRSS1_9 0x40454
-/* [WB 64] Last free element in the free list of T2 entries - port 0. */
#define SRC_REG_LASTFREE0 0x40530
-/* [RW 5] The number of hash bits used for the search (h); Values can be 8
- to 24. */
#define SRC_REG_NUMBER_HASH_BITS0 0x40400
/* [RW 1] Reset internal state machines. */
#define SRC_REG_SOFT_RST 0x4049c
-/* [R 1] Interrupt register #0 read */
+/* [R 3] Interrupt register #0 read */
#define SRC_REG_SRC_INT_STS 0x404ac
/* [RW 3] Parity mask register #0 read/write */
#define SRC_REG_SRC_PRTY_MASK 0x404c8
@@ -2637,11 +3519,14 @@
weight 8 (the most prioritised); 1 stands for weight 1(least
prioritised); 2 stands for weight 2; tc. */
#define TCM_REG_PBF_WEIGHT 0x500b4
-/* [RW 6] The physical queue number 0 per port index. */
#define TCM_REG_PHYS_QNUM0_0 0x500e0
#define TCM_REG_PHYS_QNUM0_1 0x500e4
-/* [RW 6] The physical queue number 1 per port index. */
#define TCM_REG_PHYS_QNUM1_0 0x500e8
+#define TCM_REG_PHYS_QNUM1_1 0x500ec
+#define TCM_REG_PHYS_QNUM2_0 0x500f0
+#define TCM_REG_PHYS_QNUM2_1 0x500f4
+#define TCM_REG_PHYS_QNUM3_0 0x500f8
+#define TCM_REG_PHYS_QNUM3_1 0x500fc
/* [RW 1] Input prs Interface enable. If 0 - the valid input is disregarded;
acknowledge output is deasserted; all other signals are treated as usual;
if 1 - normal activity. */
@@ -2670,6 +3555,8 @@
#define TCM_REG_TCM_INT_MASK 0x501dc
/* [R 11] Interrupt register #0 read */
#define TCM_REG_TCM_INT_STS 0x501d0
+/* [R 27] Parity register #0 read */
+#define TCM_REG_TCM_PRTY_STS 0x501e0
/* [RW 3] The size of AG context region 0 in REG-pairs. Designates the MS
REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
Is used to determine the number of the AG context REG-pairs written back;
@@ -2729,6 +3616,7 @@
mechanism. The fields are: [5:0] - length of the message; 15:6] - message
pointer; 20:16] - next pointer. */
#define TCM_REG_XX_DESCR_TABLE 0x50280
+#define TCM_REG_XX_DESCR_TABLE_SIZE 32
/* [R 6] Use to read the value of XX protection Free counter. */
#define TCM_REG_XX_FREE 0x50178
/* [RW 6] Initial value for the credit counter; responsible for fulfilling
@@ -2780,7 +3668,7 @@
/* [RW 4] Load value for expiration credit cnt. CFC max number of
outstanding load requests for timers (expiration) context loading. */
#define TM_REG_EXP_CRDCNT_VAL 0x164238
-/* [RW 18] Linear0 Max active cid. */
+/* [RW 18] Linear0 Max active cid (in banks of 32 entries). */
#define TM_REG_LIN0_MAX_ACTIVE_CID 0x164048
/* [WB 64] Linear0 phy address. */
#define TM_REG_LIN0_PHY_ADDR 0x164270
@@ -2804,6 +3692,21 @@
#define TM_REG_TM_INT_STS 0x1640f0
/* [RW 8] The event id for aggregated interrupt 0 */
#define TSDM_REG_AGG_INT_EVENT_0 0x42038
+#define TSDM_REG_AGG_INT_EVENT_2 0x42040
+#define TSDM_REG_AGG_INT_EVENT_20 0x42088
+#define TSDM_REG_AGG_INT_EVENT_21 0x4208c
+#define TSDM_REG_AGG_INT_EVENT_22 0x42090
+#define TSDM_REG_AGG_INT_EVENT_23 0x42094
+#define TSDM_REG_AGG_INT_EVENT_24 0x42098
+#define TSDM_REG_AGG_INT_EVENT_25 0x4209c
+#define TSDM_REG_AGG_INT_EVENT_26 0x420a0
+#define TSDM_REG_AGG_INT_EVENT_27 0x420a4
+#define TSDM_REG_AGG_INT_EVENT_28 0x420a8
+#define TSDM_REG_AGG_INT_EVENT_29 0x420ac
+#define TSDM_REG_AGG_INT_EVENT_3 0x42044
+#define TSDM_REG_AGG_INT_EVENT_30 0x420b0
+#define TSDM_REG_AGG_INT_EVENT_31 0x420b4
+#define TSDM_REG_AGG_INT_EVENT_4 0x42048
/* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
#define TSDM_REG_CFC_RSP_START_ADDR 0x42008
/* [RW 16] The maximum value of the competion counter #0 */
@@ -2868,6 +3771,9 @@
/* [RW 32] Interrupt mask register #0 read/write */
#define TSDM_REG_TSDM_INT_MASK_0 0x4229c
#define TSDM_REG_TSDM_INT_MASK_1 0x422ac
+/* [R 32] Interrupt register #0 read */
+#define TSDM_REG_TSDM_INT_STS_0 0x42290
+#define TSDM_REG_TSDM_INT_STS_1 0x422a0
/* [RW 11] Parity mask register #0 read/write */
#define TSDM_REG_TSDM_PRTY_MASK 0x422bc
/* [R 11] Parity register #0 read */
@@ -2908,9 +3814,8 @@
#define TSEM_REG_ENABLE_OUT 0x1800a8
/* [RW 32] This address space contains all registers and memories that are
placed in SEM_FAST block. The SEM_FAST registers are described in
- appendix B. In order to access the SEM_FAST registers the base address
- TSEM_REGISTERS_FAST_MEMORY (Offset: 0x1a0000) should be added to each
- SEM_FAST register offset. */
+ appendix B. In order to access the sem_fast registers the base address
+ ~fast_memory.fast_memory should be added to eachsem_fast register offset. */
#define TSEM_REG_FAST_MEMORY 0x1a0000
/* [RW 1] Disables input messages from FIC0 May be updated during run_time
by the microcode */
@@ -2921,6 +3826,7 @@
/* [RW 15] Interrupt table Read and write access to it is not possible in
the middle of the work */
#define TSEM_REG_INT_TABLE 0x180400
+#define TSEM_REG_INT_TABLE_SIZE 256
/* [ST 24] Statistics register. The number of messages that entered through
FIC0 */
#define TSEM_REG_MSG_NUM_FIC0 0x180000
@@ -2993,6 +3899,9 @@
/* [RW 32] Interrupt mask register #0 read/write */
#define TSEM_REG_TSEM_INT_MASK_0 0x180100
#define TSEM_REG_TSEM_INT_MASK_1 0x180110
+/* [R 32] Interrupt register #0 read */
+#define TSEM_REG_TSEM_INT_STS_0 0x1800f4
+#define TSEM_REG_TSEM_INT_STS_1 0x180104
/* [RW 32] Parity mask register #0 read/write */
#define TSEM_REG_TSEM_PRTY_MASK_0 0x180120
#define TSEM_REG_TSEM_PRTY_MASK_1 0x180130
@@ -3088,12 +3997,15 @@
#define UCM_REG_N_SM_CTX_LD_2 0xe005c
#define UCM_REG_N_SM_CTX_LD_3 0xe0060
#define UCM_REG_N_SM_CTX_LD_4 0xe0064
-/* [RW 6] The physical queue number 0 per port index (CID[23]) */
+#define UCM_REG_N_SM_CTX_LD_5 0xe0068
#define UCM_REG_PHYS_QNUM0_0 0xe0110
#define UCM_REG_PHYS_QNUM0_1 0xe0114
-/* [RW 6] The physical queue number 1 per port index (CID[23]) */
#define UCM_REG_PHYS_QNUM1_0 0xe0118
#define UCM_REG_PHYS_QNUM1_1 0xe011c
+#define UCM_REG_PHYS_QNUM2_0 0xe0120
+#define UCM_REG_PHYS_QNUM2_1 0xe0124
+#define UCM_REG_PHYS_QNUM3_0 0xe0128
+#define UCM_REG_PHYS_QNUM3_1 0xe012c
/* [RW 8] The Event ID for Timers formatting in case of stop done. */
#define UCM_REG_STOP_EVNT_ID 0xe00ac
/* [RC 1] Set when the message length mismatch (relative to last indication)
@@ -3132,6 +4044,8 @@
#define UCM_REG_UCM_INT_MASK 0xe01d4
/* [R 11] Interrupt register #0 read */
#define UCM_REG_UCM_INT_STS 0xe01c8
+/* [R 27] Parity register #0 read */
+#define UCM_REG_UCM_PRTY_STS 0xe01d8
/* [RW 2] The size of AG context region 0 in REG-pairs. Designates the MS
REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
Is used to determine the number of the AG context REG-pairs written back;
@@ -3189,6 +4103,7 @@
mechanism. The fields are:[5:0] - message length; 14:6] - message
pointer; 19:15] - next pointer. */
#define UCM_REG_XX_DESCR_TABLE 0xe0280
+#define UCM_REG_XX_DESCR_TABLE_SIZE 32
/* [R 6] Use to read the XX protection Free counter. */
#define UCM_REG_XX_FREE 0xe016c
/* [RW 6] Initial value for the credit counter; responsible for fulfilling
@@ -3218,6 +4133,21 @@
#define USDM_REG_AGG_INT_EVENT_17 0xc407c
#define USDM_REG_AGG_INT_EVENT_18 0xc4080
#define USDM_REG_AGG_INT_EVENT_19 0xc4084
+#define USDM_REG_AGG_INT_EVENT_2 0xc4040
+#define USDM_REG_AGG_INT_EVENT_20 0xc4088
+#define USDM_REG_AGG_INT_EVENT_21 0xc408c
+#define USDM_REG_AGG_INT_EVENT_22 0xc4090
+#define USDM_REG_AGG_INT_EVENT_23 0xc4094
+#define USDM_REG_AGG_INT_EVENT_24 0xc4098
+#define USDM_REG_AGG_INT_EVENT_25 0xc409c
+#define USDM_REG_AGG_INT_EVENT_26 0xc40a0
+#define USDM_REG_AGG_INT_EVENT_27 0xc40a4
+#define USDM_REG_AGG_INT_EVENT_28 0xc40a8
+#define USDM_REG_AGG_INT_EVENT_29 0xc40ac
+#define USDM_REG_AGG_INT_EVENT_3 0xc4044
+#define USDM_REG_AGG_INT_EVENT_30 0xc40b0
+#define USDM_REG_AGG_INT_EVENT_31 0xc40b4
+#define USDM_REG_AGG_INT_EVENT_4 0xc4048
/* [RW 1] For each aggregated interrupt index whether the mode is normal (0)
or auto-mask-mode (1) */
#define USDM_REG_AGG_INT_MODE_0 0xc41b8
@@ -3298,6 +4228,9 @@
/* [RW 32] Interrupt mask register #0 read/write */
#define USDM_REG_USDM_INT_MASK_0 0xc42a0
#define USDM_REG_USDM_INT_MASK_1 0xc42b0
+/* [R 32] Interrupt register #0 read */
+#define USDM_REG_USDM_INT_STS_0 0xc4294
+#define USDM_REG_USDM_INT_STS_1 0xc42a4
/* [RW 11] Parity mask register #0 read/write */
#define USDM_REG_USDM_PRTY_MASK 0xc42c0
/* [R 11] Parity register #0 read */
@@ -3338,9 +4271,8 @@
#define USEM_REG_ENABLE_OUT 0x3000a8
/* [RW 32] This address space contains all registers and memories that are
placed in SEM_FAST block. The SEM_FAST registers are described in
- appendix B. In order to access the SEM_FAST registers... the base address
- USEM_REGISTERS_FAST_MEMORY (Offset: 0x320000) should be added to each
- SEM_FAST register offset. */
+ appendix B. In order to access the sem_fast registers the base address
+ ~fast_memory.fast_memory should be added to eachsem_fast register offset. */
#define USEM_REG_FAST_MEMORY 0x320000
/* [RW 1] Disables input messages from FIC0 May be updated during run_time
by the microcode */
@@ -3351,6 +4283,7 @@
/* [RW 15] Interrupt table Read and write access to it is not possible in
the middle of the work */
#define USEM_REG_INT_TABLE 0x300400
+#define USEM_REG_INT_TABLE_SIZE 256
/* [ST 24] Statistics register. The number of messages that entered through
FIC0 */
#define USEM_REG_MSG_NUM_FIC0 0x300000
@@ -3423,6 +4356,9 @@
/* [RW 32] Interrupt mask register #0 read/write */
#define USEM_REG_USEM_INT_MASK_0 0x300110
#define USEM_REG_USEM_INT_MASK_1 0x300120
+/* [R 32] Interrupt register #0 read */
+#define USEM_REG_USEM_INT_STS_0 0x300104
+#define USEM_REG_USEM_INT_STS_1 0x300114
/* [RW 32] Parity mask register #0 read/write */
#define USEM_REG_USEM_PRTY_MASK_0 0x300130
#define USEM_REG_USEM_PRTY_MASK_1 0x300140
@@ -3491,11 +4427,8 @@
writes the initial credit value; read returns the current value of the
credit counter. Must be initialized to 64 at start-up. */
#define XCM_REG_FIC1_INIT_CRD 0x20410
-/* [RW 8] The maximum delayed ACK counter value.Must be at least 2. Per port
- value. */
#define XCM_REG_GLB_DEL_ACK_MAX_CNT_0 0x20118
#define XCM_REG_GLB_DEL_ACK_MAX_CNT_1 0x2011c
-/* [RW 28] The delayed ACK timeout in ticks. Per port value. */
#define XCM_REG_GLB_DEL_ACK_TMR_VAL_0 0x20108
#define XCM_REG_GLB_DEL_ACK_TMR_VAL_1 0x2010c
/* [RW 1] Arbitratiojn between Input Arbiter groups: 0 - fair Round-Robin; 1
@@ -3545,6 +4478,7 @@
#define XCM_REG_N_SM_CTX_LD_2 0x20068
#define XCM_REG_N_SM_CTX_LD_3 0x2006c
#define XCM_REG_N_SM_CTX_LD_4 0x20070
+#define XCM_REG_N_SM_CTX_LD_5 0x20074
/* [RW 1] Input pbf Interface enable. If 0 - the valid input is disregarded;
acknowledge output is deasserted; all other signals are treated as usual;
if 1 - normal activity. */
@@ -3556,6 +4490,8 @@
weight 8 (the most prioritised); 1 stands for weight 1(least
prioritised); 2 stands for weight 2; tc. */
#define XCM_REG_PBF_WEIGHT 0x200d0
+#define XCM_REG_PHYS_QNUM3_0 0x20100
+#define XCM_REG_PHYS_QNUM3_1 0x20104
/* [RW 8] The Event ID for Timers formatting in case of stop done. */
#define XCM_REG_STOP_EVNT_ID 0x200b8
/* [RC 1] Set at message length mismatch (relative to last indication) at
@@ -3603,53 +4539,17 @@
weight 8 (the most prioritised); 1 stands for weight 1(least
prioritised); 2 stands for weight 2; tc. */
#define XCM_REG_USEM_WEIGHT 0x200c8
-/* [RW 2] DA counter command; used in case of window update doorbell.The
- first index stands for the value DaEnable of that connection. The second
- index stands for port number. */
#define XCM_REG_WU_DA_CNT_CMD00 0x201d4
-/* [RW 2] DA counter command; used in case of window update doorbell.The
- first index stands for the value DaEnable of that connection. The second
- index stands for port number. */
#define XCM_REG_WU_DA_CNT_CMD01 0x201d8
-/* [RW 2] DA counter command; used in case of window update doorbell.The
- first index stands for the value DaEnable of that connection. The second
- index stands for port number. */
#define XCM_REG_WU_DA_CNT_CMD10 0x201dc
-/* [RW 2] DA counter command; used in case of window update doorbell.The
- first index stands for the value DaEnable of that connection. The second
- index stands for port number. */
#define XCM_REG_WU_DA_CNT_CMD11 0x201e0
-/* [RW 8] DA counter update value used in case of window update doorbell.The
- first index stands for the value DaEnable of that connection. The second
- index stands for port number. */
#define XCM_REG_WU_DA_CNT_UPD_VAL00 0x201e4
-/* [RW 8] DA counter update value; used in case of window update
- doorbell.The first index stands for the value DaEnable of that
- connection. The second index stands for port number. */
#define XCM_REG_WU_DA_CNT_UPD_VAL01 0x201e8
-/* [RW 8] DA counter update value; used in case of window update
- doorbell.The first index stands for the value DaEnable of that
- connection. The second index stands for port number. */
#define XCM_REG_WU_DA_CNT_UPD_VAL10 0x201ec
-/* [RW 8] DA counter update value; used in case of window update
- doorbell.The first index stands for the value DaEnable of that
- connection. The second index stands for port number. */
#define XCM_REG_WU_DA_CNT_UPD_VAL11 0x201f0
-/* [RW 1] DA timer command; used in case of window update doorbell.The first
- index stands for the value DaEnable of that connection. The second index
- stands for port number. */
#define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00 0x201c4
-/* [RW 1] DA timer command; used in case of window update doorbell.The first
- index stands for the value DaEnable of that connection. The second index
- stands for port number. */
#define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01 0x201c8
-/* [RW 1] DA timer command; used in case of window update doorbell.The first
- index stands for the value DaEnable of that connection. The second index
- stands for port number. */
#define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD10 0x201cc
-/* [RW 1] DA timer command; used in case of window update doorbell.The first
- index stands for the value DaEnable of that connection. The second index
- stands for port number. */
#define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD11 0x201d0
/* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded;
acknowledge output is deasserted; all other signals are treated as usual;
@@ -3659,6 +4559,8 @@
#define XCM_REG_XCM_INT_MASK 0x202b4
/* [R 14] Interrupt register #0 read */
#define XCM_REG_XCM_INT_STS 0x202a8
+/* [R 30] Parity register #0 read */
+#define XCM_REG_XCM_PRTY_STS 0x202b8
/* [RW 4] The size of AG context region 0 in REG-pairs. Designates the MS
REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
Is used to determine the number of the AG context REG-pairs written back;
@@ -3715,6 +4617,7 @@
mechanism. The fields are: [5:0] - message length; 11:6] - message
pointer; 16:12] - next pointer. */
#define XCM_REG_XX_DESCR_TABLE 0x20480
+#define XCM_REG_XX_DESCR_TABLE_SIZE 32
/* [R 6] Used to read the XX protection Free counter. */
#define XCM_REG_XX_FREE 0x20240
/* [RW 6] Initial value for the credit counter; responsible for fulfilling
@@ -3728,7 +4631,7 @@
#define XCM_REG_XX_MSG_NUM 0x20428
/* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */
#define XCM_REG_XX_OVFL_EVNT_ID 0x20058
-/* [RW 15] Indirect access to the XX table of the XX protection mechanism.
+/* [RW 16] Indirect access to the XX table of the XX protection mechanism.
The fields are:[4:0] - tail pointer; 9:5] - Link List size; 14:10] -
header pointer. */
#define XCM_REG_XX_TABLE 0x20500
@@ -3745,6 +4648,9 @@
#define XSDM_REG_AGG_INT_EVENT_17 0x16607c
#define XSDM_REG_AGG_INT_EVENT_18 0x166080
#define XSDM_REG_AGG_INT_EVENT_19 0x166084
+#define XSDM_REG_AGG_INT_EVENT_10 0x166060
+#define XSDM_REG_AGG_INT_EVENT_11 0x166064
+#define XSDM_REG_AGG_INT_EVENT_12 0x166068
#define XSDM_REG_AGG_INT_EVENT_2 0x166040
#define XSDM_REG_AGG_INT_EVENT_20 0x166088
#define XSDM_REG_AGG_INT_EVENT_21 0x16608c
@@ -3756,6 +4662,15 @@
#define XSDM_REG_AGG_INT_EVENT_27 0x1660a4
#define XSDM_REG_AGG_INT_EVENT_28 0x1660a8
#define XSDM_REG_AGG_INT_EVENT_29 0x1660ac
+#define XSDM_REG_AGG_INT_EVENT_3 0x166044
+#define XSDM_REG_AGG_INT_EVENT_30 0x1660b0
+#define XSDM_REG_AGG_INT_EVENT_31 0x1660b4
+#define XSDM_REG_AGG_INT_EVENT_4 0x166048
+#define XSDM_REG_AGG_INT_EVENT_5 0x16604c
+#define XSDM_REG_AGG_INT_EVENT_6 0x166050
+#define XSDM_REG_AGG_INT_EVENT_7 0x166054
+#define XSDM_REG_AGG_INT_EVENT_8 0x166058
+#define XSDM_REG_AGG_INT_EVENT_9 0x16605c
/* [RW 1] For each aggregated interrupt index whether the mode is normal (0)
or auto-mask-mode (1) */
#define XSDM_REG_AGG_INT_MODE_0 0x1661b8
@@ -3832,6 +4747,9 @@
/* [RW 32] Interrupt mask register #0 read/write */
#define XSDM_REG_XSDM_INT_MASK_0 0x16629c
#define XSDM_REG_XSDM_INT_MASK_1 0x1662ac
+/* [R 32] Interrupt register #0 read */
+#define XSDM_REG_XSDM_INT_STS_0 0x166290
+#define XSDM_REG_XSDM_INT_STS_1 0x1662a0
/* [RW 11] Parity mask register #0 read/write */
#define XSDM_REG_XSDM_PRTY_MASK 0x1662bc
/* [R 11] Parity register #0 read */
@@ -3872,9 +4790,8 @@
#define XSEM_REG_ENABLE_OUT 0x2800a8
/* [RW 32] This address space contains all registers and memories that are
placed in SEM_FAST block. The SEM_FAST registers are described in
- appendix B. In order to access the SEM_FAST registers the base address
- XSEM_REGISTERS_FAST_MEMORY (Offset: 0x2a0000) should be added to each
- SEM_FAST register offset. */
+ appendix B. In order to access the sem_fast registers the base address
+ ~fast_memory.fast_memory should be added to eachsem_fast register offset. */
#define XSEM_REG_FAST_MEMORY 0x2a0000
/* [RW 1] Disables input messages from FIC0 May be updated during run_time
by the microcode */
@@ -3885,6 +4802,7 @@
/* [RW 15] Interrupt table Read and write access to it is not possible in
the middle of the work */
#define XSEM_REG_INT_TABLE 0x280400
+#define XSEM_REG_INT_TABLE_SIZE 256
/* [ST 24] Statistics register. The number of messages that entered through
FIC0 */
#define XSEM_REG_MSG_NUM_FIC0 0x280000
@@ -3957,6 +4875,9 @@
/* [RW 32] Interrupt mask register #0 read/write */
#define XSEM_REG_XSEM_INT_MASK_0 0x280110
#define XSEM_REG_XSEM_INT_MASK_1 0x280120
+/* [R 32] Interrupt register #0 read */
+#define XSEM_REG_XSEM_INT_STS_0 0x280104
+#define XSEM_REG_XSEM_INT_STS_1 0x280114
/* [RW 32] Parity mask register #0 read/write */
#define XSEM_REG_XSEM_PRTY_MASK_0 0x280130
#define XSEM_REG_XSEM_PRTY_MASK_1 0x280140
@@ -3993,10 +4914,14 @@
#define BIGMAC_REGISTER_TX_SOURCE_ADDR (0x08<<3)
#define BIGMAC_REGISTER_TX_STAT_GTBYT (0x20<<3)
#define BIGMAC_REGISTER_TX_STAT_GTPKT (0x0C<<3)
+#define EMAC_LED_1000MB_OVERRIDE (1L<<1)
+#define EMAC_LED_100MB_OVERRIDE (1L<<2)
+#define EMAC_LED_10MB_OVERRIDE (1L<<3)
+#define EMAC_LED_2500MB_OVERRIDE (1L<<12)
+#define EMAC_LED_OVERRIDE (1L<<0)
+#define EMAC_LED_TRAFFIC (1L<<6)
#define EMAC_MDIO_COMM_COMMAND_ADDRESS (0L<<26)
-#define EMAC_MDIO_COMM_COMMAND_READ_22 (2L<<26)
#define EMAC_MDIO_COMM_COMMAND_READ_45 (3L<<26)
-#define EMAC_MDIO_COMM_COMMAND_WRITE_22 (1L<<26)
#define EMAC_MDIO_COMM_COMMAND_WRITE_45 (1L<<26)
#define EMAC_MDIO_COMM_DATA (0xffffL<<0)
#define EMAC_MDIO_COMM_START_BUSY (1L<<29)
@@ -4013,6 +4938,7 @@
#define EMAC_MODE_PORT_MII (1L<<2)
#define EMAC_MODE_PORT_MII_10M (3L<<2)
#define EMAC_MODE_RESET (1L<<0)
+#define EMAC_REG_EMAC_LED 0xc
#define EMAC_REG_EMAC_MAC_MATCH 0x10
#define EMAC_REG_EMAC_MDIO_COMM 0xac
#define EMAC_REG_EMAC_MDIO_MODE 0xb4
@@ -4030,14 +4956,16 @@
#define EMAC_RX_MODE_PROMISCUOUS (1L<<8)
#define EMAC_RX_MTU_SIZE_JUMBO_ENA (1L<<31)
#define EMAC_TX_MODE_EXT_PAUSE_EN (1L<<3)
-#define EMAC_TX_MODE_RESET (1L<<0)
+#define MISC_REGISTERS_GPIO_0 0
#define MISC_REGISTERS_GPIO_1 1
#define MISC_REGISTERS_GPIO_2 2
#define MISC_REGISTERS_GPIO_3 3
#define MISC_REGISTERS_GPIO_CLR_POS 16
#define MISC_REGISTERS_GPIO_FLOAT (0xffL<<24)
#define MISC_REGISTERS_GPIO_FLOAT_POS 24
+#define MISC_REGISTERS_GPIO_HIGH 1
#define MISC_REGISTERS_GPIO_INPUT_HI_Z 2
+#define MISC_REGISTERS_GPIO_LOW 0
#define MISC_REGISTERS_GPIO_OUTPUT_HIGH 1
#define MISC_REGISTERS_GPIO_OUTPUT_LOW 0
#define MISC_REGISTERS_GPIO_PORT_SHIFT 4
@@ -4127,7 +5055,7 @@
#define AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR (1<<10)
#define RESERVED_GENERAL_ATTENTION_BIT_0 0
-#define EVEREST_GEN_ATTN_IN_USE_MASK 0x3e0
+#define EVEREST_GEN_ATTN_IN_USE_MASK 0x3ffe0
#define EVEREST_LATCHED_ATTN_IN_USE_MASK 0xffe00000
#define RESERVED_GENERAL_ATTENTION_BIT_6 6
@@ -4156,6 +5084,17 @@
/* mcp error attention bit */
#define MCP_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_11
+/*E1H NIG status sync attention mapped to group 4-7*/
+#define LINK_SYNC_ATTENTION_BIT_FUNC_0 RESERVED_GENERAL_ATTENTION_BIT_12
+#define LINK_SYNC_ATTENTION_BIT_FUNC_1 RESERVED_GENERAL_ATTENTION_BIT_13
+#define LINK_SYNC_ATTENTION_BIT_FUNC_2 RESERVED_GENERAL_ATTENTION_BIT_14
+#define LINK_SYNC_ATTENTION_BIT_FUNC_3 RESERVED_GENERAL_ATTENTION_BIT_15
+#define LINK_SYNC_ATTENTION_BIT_FUNC_4 RESERVED_GENERAL_ATTENTION_BIT_16
+#define LINK_SYNC_ATTENTION_BIT_FUNC_5 RESERVED_GENERAL_ATTENTION_BIT_17
+#define LINK_SYNC_ATTENTION_BIT_FUNC_6 RESERVED_GENERAL_ATTENTION_BIT_18
+#define LINK_SYNC_ATTENTION_BIT_FUNC_7 RESERVED_GENERAL_ATTENTION_BIT_19
+
+
#define LATCHED_ATTN_RBCR 23
#define LATCHED_ATTN_RBCT 24
#define LATCHED_ATTN_RBCN 25
@@ -4221,22 +5160,41 @@
#define PCICFG_OFFSET 0x2000
#define PCICFG_VENDOR_ID_OFFSET 0x00
#define PCICFG_DEVICE_ID_OFFSET 0x02
-#define PCICFG_SUBSYSTEM_VENDOR_ID_OFFSET 0x2c
-#define PCICFG_SUBSYSTEM_ID_OFFSET 0x2e
-#define PCICFG_INT_LINE 0x3c
-#define PCICFG_INT_PIN 0x3d
+#define PCICFG_COMMAND_OFFSET 0x04
+#define PCICFG_STATUS_OFFSET 0x06
+#define PCICFG_REVESION_ID 0x08
#define PCICFG_CACHE_LINE_SIZE 0x0c
#define PCICFG_LATENCY_TIMER 0x0d
-#define PCICFG_REVESION_ID 0x08
-#define PCICFG_BAR_1_LOW 0x10
-#define PCICFG_BAR_1_HIGH 0x14
-#define PCICFG_BAR_2_LOW 0x18
-#define PCICFG_BAR_2_HIGH 0x1c
-#define PCICFG_GRC_ADDRESS 0x78
-#define PCICFG_GRC_DATA 0x80
+#define PCICFG_BAR_1_LOW 0x10
+#define PCICFG_BAR_1_HIGH 0x14
+#define PCICFG_BAR_2_LOW 0x18
+#define PCICFG_BAR_2_HIGH 0x1c
+#define PCICFG_SUBSYSTEM_VENDOR_ID_OFFSET 0x2c
+#define PCICFG_SUBSYSTEM_ID_OFFSET 0x2e
+#define PCICFG_INT_LINE 0x3c
+#define PCICFG_INT_PIN 0x3d
+#define PCICFG_PM_CSR_OFFSET 0x4c
+#define PCICFG_GRC_ADDRESS 0x78
+#define PCICFG_GRC_DATA 0x80
#define PCICFG_DEVICE_CONTROL 0xb4
#define PCICFG_LINK_CONTROL 0xbc
+#define PCICFG_COMMAND_IO_SPACE (1<<0)
+#define PCICFG_COMMAND_MEM_SPACE (1<<1)
+#define PCICFG_COMMAND_BUS_MASTER (1<<2)
+#define PCICFG_COMMAND_SPECIAL_CYCLES (1<<3)
+#define PCICFG_COMMAND_MWI_CYCLES (1<<4)
+#define PCICFG_COMMAND_VGA_SNOOP (1<<5)
+#define PCICFG_COMMAND_PERR_ENA (1<<6)
+#define PCICFG_COMMAND_STEPPING (1<<7)
+#define PCICFG_COMMAND_SERR_ENA (1<<8)
+#define PCICFG_COMMAND_FAST_B2B (1<<9)
+#define PCICFG_COMMAND_INT_DISABLE (1<<10)
+#define PCICFG_COMMAND_RESERVED (0x1f<<11)
+
+#define PCICFG_PM_CSR_STATE (0x3<<0)
+#define PCICFG_PM_CSR_PME_STATUS (1<<15)
+
#define BAR_USTRORM_INTMEM 0x400000
#define BAR_CSTRORM_INTMEM 0x410000
#define BAR_XSTRORM_INTMEM 0x420000
@@ -4336,7 +5294,7 @@
#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_MAIN_RST 0x8000
#define MDIO_REG_BANK_CL73_IEEEB1 0x10
-#define MDIO_CL73_IEEEB1_AN_ADV2 0x01
+#define MDIO_CL73_IEEEB1_AN_ADV2 0x01
#define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M 0x0000
#define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX 0x0020
#define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4 0x0040
@@ -4365,7 +5323,7 @@
#define MDIO_REG_BANK_RX_ALL 0x80f0
#define MDIO_RX_ALL_RX_EQ_BOOST 0x1c
#define MDIO_RX_ALL_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
-#define MDIO_RX_ALL_RX_EQ_BOOST_OFFSET_CTRL 0x10
+#define MDIO_RX_ALL_RX_EQ_BOOST_OFFSET_CTRL 0x10
#define MDIO_REG_BANK_TX0 0x8060
#define MDIO_TX0_TX_DRIVER 0x17
@@ -4392,213 +5350,266 @@
#define MDIO_XGXS_BLOCK2_RX_LN_SWAP 0x10
#define MDIO_XGXS_BLOCK2_RX_LN_SWAP_ENABLE 0x8000
#define MDIO_XGXS_BLOCK2_RX_LN_SWAP_FORCE_ENABLE 0x4000
-#define MDIO_XGXS_BLOCK2_TX_LN_SWAP 0x11
+#define MDIO_XGXS_BLOCK2_TX_LN_SWAP 0x11
#define MDIO_XGXS_BLOCK2_TX_LN_SWAP_ENABLE 0x8000
-#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G 0x14
+#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G 0x14
#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS 0x0001
#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS 0x0010
-#define MDIO_XGXS_BLOCK2_TEST_MODE_LANE 0x15
+#define MDIO_XGXS_BLOCK2_TEST_MODE_LANE 0x15
#define MDIO_REG_BANK_GP_STATUS 0x8120
-#define MDIO_GP_STATUS_TOP_AN_STATUS1 0x1B
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE 0x0001
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL37_AUTONEG_COMPLETE 0x0002
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS 0x0004
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS 0x0008
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_MR_LP_NP_AN_ABLE 0x0010
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_LP_NP_BAM_ABLE 0x0020
-
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_TXSIDE 0x0040
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_RXSIDE 0x0080
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_MASK 0x3f00
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10M 0x0000
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_100M 0x0100
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G 0x0200
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_2_5G 0x0300
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_5G 0x0400
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_6G 0x0500
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_HIG 0x0600
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_CX4 0x0700
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12G_HIG 0x0800
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12_5G 0x0900
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_13G 0x0A00
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_15G 0x0B00
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_16G 0x0C00
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G_KX 0x0D00
-#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KX4 0x0E00
+#define MDIO_GP_STATUS_TOP_AN_STATUS1 0x1B
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE 0x0001
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL37_AUTONEG_COMPLETE 0x0002
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS 0x0004
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS 0x0008
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_MR_LP_NP_AN_ABLE 0x0010
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_LP_NP_BAM_ABLE 0x0020
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_TXSIDE 0x0040
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_RXSIDE 0x0080
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_MASK 0x3f00
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10M 0x0000
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_100M 0x0100
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G 0x0200
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_2_5G 0x0300
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_5G 0x0400
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_6G 0x0500
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_HIG 0x0600
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_CX4 0x0700
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12G_HIG 0x0800
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12_5G 0x0900
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_13G 0x0A00
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_15G 0x0B00
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_16G 0x0C00
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G_KX 0x0D00
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KX4 0x0E00
#define MDIO_REG_BANK_10G_PARALLEL_DETECT 0x8130
-#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL 0x11
-#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN 0x1
-#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK 0x13
-#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK_CNT (0xb71<<1)
+#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL 0x11
+#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN 0x1
+#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK 0x13
+#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK_CNT (0xb71<<1)
#define MDIO_REG_BANK_SERDES_DIGITAL 0x8300
-#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1 0x10
-#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_FIBER_MODE 0x0001
-#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_TBI_IF 0x0002
-#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_SIGNAL_DETECT_EN 0x0004
-#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_INVERT_SIGNAL_DETECT 0x0008
-#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET 0x0010
-#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_MSTR_MODE 0x0020
-#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2 0x11
-#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN 0x0001
-#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_AN_FST_TMR 0x0040
-#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1 0x14
-#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_DUPLEX 0x0004
-#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_MASK 0x0018
-#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_SHIFT 3
-#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_2_5G 0x0018
-#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_1G 0x0010
-#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_100M 0x0008
-#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_10M 0x0000
-#define MDIO_SERDES_DIGITAL_MISC1 0x18
-#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_MASK 0xE000
-#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_25M 0x0000
-#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_100M 0x2000
-#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_125M 0x4000
-#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_156_25M 0x6000
-#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_187_5M 0x8000
-#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL 0x0010
-#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_MASK 0x000f
-#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_2_5G 0x0000
-#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_5G 0x0001
-#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_6G 0x0002
-#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_HIG 0x0003
-#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_CX4 0x0004
-#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_12G 0x0005
-#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_12_5G 0x0006
-#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_13G 0x0007
-#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_15G 0x0008
-#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_16G 0x0009
+#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1 0x10
+#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_FIBER_MODE 0x0001
+#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_TBI_IF 0x0002
+#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_SIGNAL_DETECT_EN 0x0004
+#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_INVERT_SIGNAL_DETECT 0x0008
+#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET 0x0010
+#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_MSTR_MODE 0x0020
+#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2 0x11
+#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN 0x0001
+#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_AN_FST_TMR 0x0040
+#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1 0x14
+#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_DUPLEX 0x0004
+#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_MASK 0x0018
+#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_SHIFT 3
+#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_2_5G 0x0018
+#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_1G 0x0010
+#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_100M 0x0008
+#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_10M 0x0000
+#define MDIO_SERDES_DIGITAL_MISC1 0x18
+#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_MASK 0xE000
+#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_25M 0x0000
+#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_100M 0x2000
+#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_125M 0x4000
+#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_156_25M 0x6000
+#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_187_5M 0x8000
+#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL 0x0010
+#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_MASK 0x000f
+#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_2_5G 0x0000
+#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_5G 0x0001
+#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_6G 0x0002
+#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_HIG 0x0003
+#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_CX4 0x0004
+#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_12G 0x0005
+#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_12_5G 0x0006
+#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_13G 0x0007
+#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_15G 0x0008
+#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_16G 0x0009
#define MDIO_REG_BANK_OVER_1G 0x8320
-#define MDIO_OVER_1G_DIGCTL_3_4 0x14
-#define MDIO_OVER_1G_DIGCTL_3_4_MP_ID_MASK 0xffe0
-#define MDIO_OVER_1G_DIGCTL_3_4_MP_ID_SHIFT 5
-#define MDIO_OVER_1G_UP1 0x19
-#define MDIO_OVER_1G_UP1_2_5G 0x0001
-#define MDIO_OVER_1G_UP1_5G 0x0002
-#define MDIO_OVER_1G_UP1_6G 0x0004
-#define MDIO_OVER_1G_UP1_10G 0x0010
-#define MDIO_OVER_1G_UP1_10GH 0x0008
-#define MDIO_OVER_1G_UP1_12G 0x0020
-#define MDIO_OVER_1G_UP1_12_5G 0x0040
-#define MDIO_OVER_1G_UP1_13G 0x0080
-#define MDIO_OVER_1G_UP1_15G 0x0100
-#define MDIO_OVER_1G_UP1_16G 0x0200
-#define MDIO_OVER_1G_UP2 0x1A
-#define MDIO_OVER_1G_UP2_IPREDRIVER_MASK 0x0007
-#define MDIO_OVER_1G_UP2_IDRIVER_MASK 0x0038
-#define MDIO_OVER_1G_UP2_PREEMPHASIS_MASK 0x03C0
-#define MDIO_OVER_1G_UP3 0x1B
-#define MDIO_OVER_1G_UP3_HIGIG2 0x0001
-#define MDIO_OVER_1G_LP_UP1 0x1C
-#define MDIO_OVER_1G_LP_UP2 0x1D
-#define MDIO_OVER_1G_LP_UP2_MR_ADV_OVER_1G_MASK 0x03ff
-#define MDIO_OVER_1G_LP_UP2_PREEMPHASIS_MASK 0x0780
-#define MDIO_OVER_1G_LP_UP2_PREEMPHASIS_SHIFT 7
-#define MDIO_OVER_1G_LP_UP3 0x1E
+#define MDIO_OVER_1G_DIGCTL_3_4 0x14
+#define MDIO_OVER_1G_DIGCTL_3_4_MP_ID_MASK 0xffe0
+#define MDIO_OVER_1G_DIGCTL_3_4_MP_ID_SHIFT 5
+#define MDIO_OVER_1G_UP1 0x19
+#define MDIO_OVER_1G_UP1_2_5G 0x0001
+#define MDIO_OVER_1G_UP1_5G 0x0002
+#define MDIO_OVER_1G_UP1_6G 0x0004
+#define MDIO_OVER_1G_UP1_10G 0x0010
+#define MDIO_OVER_1G_UP1_10GH 0x0008
+#define MDIO_OVER_1G_UP1_12G 0x0020
+#define MDIO_OVER_1G_UP1_12_5G 0x0040
+#define MDIO_OVER_1G_UP1_13G 0x0080
+#define MDIO_OVER_1G_UP1_15G 0x0100
+#define MDIO_OVER_1G_UP1_16G 0x0200
+#define MDIO_OVER_1G_UP2 0x1A
+#define MDIO_OVER_1G_UP2_IPREDRIVER_MASK 0x0007
+#define MDIO_OVER_1G_UP2_IDRIVER_MASK 0x0038
+#define MDIO_OVER_1G_UP2_PREEMPHASIS_MASK 0x03C0
+#define MDIO_OVER_1G_UP3 0x1B
+#define MDIO_OVER_1G_UP3_HIGIG2 0x0001
+#define MDIO_OVER_1G_LP_UP1 0x1C
+#define MDIO_OVER_1G_LP_UP2 0x1D
+#define MDIO_OVER_1G_LP_UP2_MR_ADV_OVER_1G_MASK 0x03ff
+#define MDIO_OVER_1G_LP_UP2_PREEMPHASIS_MASK 0x0780
+#define MDIO_OVER_1G_LP_UP2_PREEMPHASIS_SHIFT 7
+#define MDIO_OVER_1G_LP_UP3 0x1E
#define MDIO_REG_BANK_BAM_NEXT_PAGE 0x8350
-#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL 0x10
-#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE 0x0001
-#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN 0x0002
+#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL 0x10
+#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE 0x0001
+#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN 0x0002
+
+#define MDIO_REG_BANK_CL73_USERB0 0x8370
+#define MDIO_CL73_USERB0_CL73_BAM_CTRL1 0x12
+#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_EN 0x8000
+#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_STATION_MNGR_EN 0x4000
+#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_NP_AFTER_BP_EN 0x2000
+#define MDIO_CL73_USERB0_CL73_BAM_CTRL3 0x14
+#define MDIO_CL73_USERB0_CL73_BAM_CTRL3_USE_CL73_HCD_MR 0x0001
+
+#define MDIO_REG_BANK_AER_BLOCK 0xFFD0
+#define MDIO_AER_BLOCK_AER_REG 0x1E
+
+#define MDIO_REG_BANK_COMBO_IEEE0 0xFFE0
+#define MDIO_COMBO_IEEE0_MII_CONTROL 0x10
+#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK 0x2040
+#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_10 0x0000
+#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_100 0x2000
+#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_1000 0x0040
+#define MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX 0x0100
+#define MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN 0x0200
+#define MDIO_COMBO_IEEO_MII_CONTROL_AN_EN 0x1000
+#define MDIO_COMBO_IEEO_MII_CONTROL_LOOPBACK 0x4000
+#define MDIO_COMBO_IEEO_MII_CONTROL_RESET 0x8000
+#define MDIO_COMBO_IEEE0_MII_STATUS 0x11
+#define MDIO_COMBO_IEEE0_MII_STATUS_LINK_PASS 0x0004
+#define MDIO_COMBO_IEEE0_MII_STATUS_AUTONEG_COMPLETE 0x0020
+#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV 0x14
+#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX 0x0020
+#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_HALF_DUPLEX 0x0040
+#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK 0x0180
+#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE 0x0000
+#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC 0x0080
+#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC 0x0100
+#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH 0x0180
+#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_NEXT_PAGE 0x8000
+#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1 0x15
+#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_NEXT_PAGE 0x8000
+#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_ACK 0x4000
+#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_MASK 0x0180
+#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_NONE 0x0000
+#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_BOTH 0x0180
+#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_HALF_DUP_CAP 0x0040
+#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_FULL_DUP_CAP 0x0020
+/*WhenthelinkpartnerisinSGMIImode(bit0=1),then
+bit15=link,bit12=duplex,bits11:10=speed,bit14=acknowledge.
+Theotherbitsarereservedandshouldbezero*/
+#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_SGMII_MODE 0x0001
+
+
+#define MDIO_PMA_DEVAD 0x1
+/*ieee*/
+#define MDIO_PMA_REG_CTRL 0x0
+#define MDIO_PMA_REG_STATUS 0x1
+#define MDIO_PMA_REG_10G_CTRL2 0x7
+#define MDIO_PMA_REG_RX_SD 0xa
+/*bcm*/
+#define MDIO_PMA_REG_BCM_CTRL 0x0096
+#define MDIO_PMA_REG_FEC_CTRL 0x00ab
+#define MDIO_PMA_REG_RX_ALARM_CTRL 0x9000
+#define MDIO_PMA_REG_LASI_CTRL 0x9002
+#define MDIO_PMA_REG_RX_ALARM 0x9003
+#define MDIO_PMA_REG_TX_ALARM 0x9004
+#define MDIO_PMA_REG_LASI_STATUS 0x9005
+#define MDIO_PMA_REG_PHY_IDENTIFIER 0xc800
+#define MDIO_PMA_REG_DIGITAL_CTRL 0xc808
+#define MDIO_PMA_REG_DIGITAL_STATUS 0xc809
+#define MDIO_PMA_REG_TX_POWER_DOWN 0xca02
+#define MDIO_PMA_REG_CMU_PLL_BYPASS 0xca09
+#define MDIO_PMA_REG_MISC_CTRL 0xca0a
+#define MDIO_PMA_REG_GEN_CTRL 0xca10
+#define MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP 0x0188
+#define MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET 0x018a
+#define MDIO_PMA_REG_ROM_VER1 0xca19
+#define MDIO_PMA_REG_ROM_VER2 0xca1a
+#define MDIO_PMA_REG_EDC_FFE_MAIN 0xca1b
+#define MDIO_PMA_REG_PLL_BANDWIDTH 0xca1d
+#define MDIO_PMA_REG_CDR_BANDWIDTH 0xca46
+#define MDIO_PMA_REG_MISC_CTRL1 0xca85
+
+#define MDIO_PMA_REG_7101_RESET 0xc000
+#define MDIO_PMA_REG_7107_LED_CNTL 0xc007
+#define MDIO_PMA_REG_7101_VER1 0xc026
+#define MDIO_PMA_REG_7101_VER2 0xc027
+
+
+#define MDIO_WIS_DEVAD 0x2
+/*bcm*/
+#define MDIO_WIS_REG_LASI_CNTL 0x9002
+#define MDIO_WIS_REG_LASI_STATUS 0x9005
+
+#define MDIO_PCS_DEVAD 0x3
+#define MDIO_PCS_REG_STATUS 0x0020
+#define MDIO_PCS_REG_LASI_STATUS 0x9005
+#define MDIO_PCS_REG_7101_DSP_ACCESS 0xD000
+#define MDIO_PCS_REG_7101_SPI_MUX 0xD008
+#define MDIO_PCS_REG_7101_SPI_CTRL_ADDR 0xE12A
+#define MDIO_PCS_REG_7101_SPI_RESET_BIT (5)
+#define MDIO_PCS_REG_7101_SPI_FIFO_ADDR 0xE02A
+#define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_WRITE_ENABLE_CMD (6)
+#define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_BULK_ERASE_CMD (0xC7)
+#define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_PAGE_PROGRAM_CMD (2)
+#define MDIO_PCS_REG_7101_SPI_BYTES_TO_TRANSFER_ADDR 0xE028
+
-#define MDIO_REG_BANK_CL73_USERB0 0x8370
-#define MDIO_CL73_USERB0_CL73_BAM_CTRL1 0x12
-#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_EN 0x8000
-#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_STATION_MNGR_EN 0x4000
-#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_NP_AFTER_BP_EN 0x2000
-#define MDIO_CL73_USERB0_CL73_BAM_CTRL3 0x14
-#define MDIO_CL73_USERB0_CL73_BAM_CTRL3_USE_CL73_HCD_MR 0x0001
+#define MDIO_XS_DEVAD 0x4
+#define MDIO_XS_PLL_SEQUENCER 0x8000
+#define MDIO_XS_SFX7101_XGXS_TEST1 0xc00a
-#define MDIO_REG_BANK_AER_BLOCK 0xFFD0
-#define MDIO_AER_BLOCK_AER_REG 0x1E
+#define MDIO_AN_DEVAD 0x7
+/*ieee*/
+#define MDIO_AN_REG_CTRL 0x0000
+#define MDIO_AN_REG_STATUS 0x0001
+#define MDIO_AN_REG_STATUS_AN_COMPLETE 0x0020
+#define MDIO_AN_REG_ADV_PAUSE 0x0010
+#define MDIO_AN_REG_ADV_PAUSE_PAUSE 0x0400
+#define MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC 0x0800
+#define MDIO_AN_REG_ADV_PAUSE_BOTH 0x0C00
+#define MDIO_AN_REG_ADV_PAUSE_MASK 0x0C00
+#define MDIO_AN_REG_ADV 0x0011
+#define MDIO_AN_REG_ADV2 0x0012
+#define MDIO_AN_REG_LP_AUTO_NEG 0x0013
+#define MDIO_AN_REG_MASTER_STATUS 0x0021
+/*bcm*/
+#define MDIO_AN_REG_LINK_STATUS 0x8304
+#define MDIO_AN_REG_CL37_CL73 0x8370
+#define MDIO_AN_REG_CL37_AN 0xffe0
+#define MDIO_AN_REG_CL37_FD 0xffe4
-#define MDIO_REG_BANK_COMBO_IEEE0 0xFFE0
-#define MDIO_COMBO_IEEE0_MII_CONTROL 0x10
-#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK 0x2040
-#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_10 0x0000
-#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_100 0x2000
-#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_1000 0x0040
-#define MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX 0x0100
-#define MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN 0x0200
-#define MDIO_COMBO_IEEO_MII_CONTROL_AN_EN 0x1000
-#define MDIO_COMBO_IEEO_MII_CONTROL_LOOPBACK 0x4000
-#define MDIO_COMBO_IEEO_MII_CONTROL_RESET 0x8000
-#define MDIO_COMBO_IEEE0_MII_STATUS 0x11
-#define MDIO_COMBO_IEEE0_MII_STATUS_LINK_PASS 0x0004
-#define MDIO_COMBO_IEEE0_MII_STATUS_AUTONEG_COMPLETE 0x0020
-#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV 0x14
-#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX 0x0020
-#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_HALF_DUPLEX 0x0040
-#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK 0x0180
-#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE 0x0000
-#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC 0x0080
-#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC 0x0100
-#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH 0x0180
-#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_NEXT_PAGE 0x8000
-#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1 0x15
-#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_NEXT_PAGE 0x8000
-#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_ACK 0x4000
-#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_MASK 0x0180
-#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_NONE\
- 0x0000
-#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_BOTH\
- 0x0180
-#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_HALF_DUP_CAP 0x0040
-#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_FULL_DUP_CAP 0x0020
-#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_SGMII_MODE 0x0001
+#define IGU_FUNC_BASE 0x0400
-#define EXT_PHY_AUTO_NEG_DEVAD 0x7
-#define EXT_PHY_OPT_PMA_PMD_DEVAD 0x1
-#define EXT_PHY_OPT_WIS_DEVAD 0x2
-#define EXT_PHY_OPT_PCS_DEVAD 0x3
-#define EXT_PHY_OPT_PHY_XS_DEVAD 0x4
-#define EXT_PHY_OPT_CNTL 0x0
-#define EXT_PHY_OPT_CNTL2 0x7
-#define EXT_PHY_OPT_PMD_RX_SD 0xa
-#define EXT_PHY_OPT_PMD_MISC_CNTL 0xca0a
-#define EXT_PHY_OPT_PHY_IDENTIFIER 0xc800
-#define EXT_PHY_OPT_PMD_DIGITAL_CNT 0xc808
-#define EXT_PHY_OPT_PMD_DIGITAL_SATUS 0xc809
-#define EXT_PHY_OPT_CMU_PLL_BYPASS 0xca09
-#define EXT_PHY_OPT_LASI_CNTL 0x9002
-#define EXT_PHY_OPT_RX_ALARM 0x9003
-#define EXT_PHY_OPT_LASI_STATUS 0x9005
-#define EXT_PHY_OPT_PCS_STATUS 0x0020
-#define EXT_PHY_OPT_XGXS_LANE_STATUS 0x0018
-#define EXT_PHY_OPT_AN_LINK_STATUS 0x8304
-#define EXT_PHY_OPT_AN_CL37_CL73 0x8370
-#define EXT_PHY_OPT_AN_CL37_FD 0xffe4
-#define EXT_PHY_OPT_AN_CL37_AN 0xffe0
-#define EXT_PHY_OPT_AN_ADV 0x11
+#define IGU_ADDR_MSIX 0x0000
+#define IGU_ADDR_INT_ACK 0x0200
+#define IGU_ADDR_PROD_UPD 0x0201
+#define IGU_ADDR_ATTN_BITS_UPD 0x0202
+#define IGU_ADDR_ATTN_BITS_SET 0x0203
+#define IGU_ADDR_ATTN_BITS_CLR 0x0204
+#define IGU_ADDR_COALESCE_NOW 0x0205
+#define IGU_ADDR_SIMD_MASK 0x0206
+#define IGU_ADDR_SIMD_NOMASK 0x0207
+#define IGU_ADDR_MSI_CTL 0x0210
+#define IGU_ADDR_MSI_ADDR_LO 0x0211
+#define IGU_ADDR_MSI_ADDR_HI 0x0212
+#define IGU_ADDR_MSI_DATA 0x0213
-#define EXT_PHY_KR_PMA_PMD_DEVAD 0x1
-#define EXT_PHY_KR_PCS_DEVAD 0x3
-#define EXT_PHY_KR_AUTO_NEG_DEVAD 0x7
-#define EXT_PHY_KR_CTRL 0x0000
-#define EXT_PHY_KR_STATUS 0x0001
-#define EXT_PHY_KR_AUTO_NEG_COMPLETE 0x0020
-#define EXT_PHY_KR_AUTO_NEG_ADVERT 0x0010
-#define EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE 0x0400
-#define EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_ASYMMETRIC 0x0800
-#define EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_BOTH 0x0C00
-#define EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_MASK 0x0C00
-#define EXT_PHY_KR_LP_AUTO_NEG 0x0013
-#define EXT_PHY_KR_CTRL2 0x0007
-#define EXT_PHY_KR_PCS_STATUS 0x0020
-#define EXT_PHY_KR_PMD_CTRL 0x0096
-#define EXT_PHY_KR_LASI_CNTL 0x9002
-#define EXT_PHY_KR_LASI_STATUS 0x9005
-#define EXT_PHY_KR_MISC_CTRL1 0xca85
-#define EXT_PHY_KR_GEN_CTRL 0xca10
-#define EXT_PHY_KR_ROM_CODE 0xca19
-#define EXT_PHY_KR_ROM_RESET_INTERNAL_MP 0x0188
-#define EXT_PHY_KR_ROM_MICRO_RESET 0x018a
+#define IGU_INT_ENABLE 0
+#define IGU_INT_DISABLE 1
+#define IGU_INT_NOP 2
+#define IGU_INT_NOP2 3
-#define EXT_PHY_SFX7101_XGXS_TEST1 0xc00a