diff options
Diffstat (limited to 'include/asm-s390/uaccess.h')
| -rw-r--r-- | include/asm-s390/uaccess.h | 363 |
1 files changed, 0 insertions, 363 deletions
diff --git a/include/asm-s390/uaccess.h b/include/asm-s390/uaccess.h deleted file mode 100644 index 0235970..0000000 --- a/include/asm-s390/uaccess.h +++ /dev/null @@ -1,363 +0,0 @@ -/* - * include/asm-s390/uaccess.h - * - * S390 version - * Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Hartmut Penner (hp@de.ibm.com), - * Martin Schwidefsky (schwidefsky@de.ibm.com) - * - * Derived from "include/asm-i386/uaccess.h" - */ -#ifndef __S390_UACCESS_H -#define __S390_UACCESS_H - -/* - * User space memory access functions - */ -#include <linux/sched.h> -#include <linux/errno.h> - -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - - -/* - * The fs value determines whether argument validity checking should be - * performed or not. If get_fs() == USER_DS, checking is performed, with - * get_fs() == KERNEL_DS, checking is bypassed. - * - * For historical reasons, these macros are grossly misnamed. - */ - -#define MAKE_MM_SEG(a) ((mm_segment_t) { (a) }) - - -#define KERNEL_DS MAKE_MM_SEG(0) -#define USER_DS MAKE_MM_SEG(1) - -#define get_ds() (KERNEL_DS) -#define get_fs() (current->thread.mm_segment) - -#define set_fs(x) \ -({ \ - unsigned long __pto; \ - current->thread.mm_segment = (x); \ - __pto = current->thread.mm_segment.ar4 ? \ - S390_lowcore.user_asce : S390_lowcore.kernel_asce; \ - __ctl_load(__pto, 7, 7); \ -}) - -#define segment_eq(a,b) ((a).ar4 == (b).ar4) - - -static inline int __access_ok(const void __user *addr, unsigned long size) -{ - return 1; -} -#define access_ok(type,addr,size) __access_ok(addr,size) - -/* - * The exception table consists of pairs of addresses: the first is the - * address of an instruction that is allowed to fault, and the second is - * the address at which the program should continue. No registers are - * modified, so it is entirely up to the continuation code to figure out - * what to do. - * - * All the routines below use bits of fixup code that are out of line - * with the main instruction path. This means when everything is well, - * we don't even have to jump over them. Further, they do not intrude - * on our cache or tlb entries. - */ - -struct exception_table_entry -{ - unsigned long insn, fixup; -}; - -struct uaccess_ops { - size_t (*copy_from_user)(size_t, const void __user *, void *); - size_t (*copy_from_user_small)(size_t, const void __user *, void *); - size_t (*copy_to_user)(size_t, void __user *, const void *); - size_t (*copy_to_user_small)(size_t, void __user *, const void *); - size_t (*copy_in_user)(size_t, void __user *, const void __user *); - size_t (*clear_user)(size_t, void __user *); - size_t (*strnlen_user)(size_t, const char __user *); - size_t (*strncpy_from_user)(size_t, const char __user *, char *); - int (*futex_atomic_op)(int op, int __user *, int oparg, int *old); - int (*futex_atomic_cmpxchg)(int __user *, int old, int new); -}; - -extern struct uaccess_ops uaccess; -extern struct uaccess_ops uaccess_std; -extern struct uaccess_ops uaccess_mvcos; -extern struct uaccess_ops uaccess_mvcos_switch; -extern struct uaccess_ops uaccess_pt; - -static inline int __put_user_fn(size_t size, void __user *ptr, void *x) -{ - size = uaccess.copy_to_user_small(size, ptr, x); - return size ? -EFAULT : size; -} - -static inline int __get_user_fn(size_t size, const void __user *ptr, void *x) -{ - size = uaccess.copy_from_user_small(size, ptr, x); - return size ? -EFAULT : size; -} - -/* - * These are the main single-value transfer routines. They automatically - * use the right size if we just have the right pointer type. - */ -#define __put_user(x, ptr) \ -({ \ - __typeof__(*(ptr)) __x = (x); \ - int __pu_err = -EFAULT; \ - __chk_user_ptr(ptr); \ - switch (sizeof (*(ptr))) { \ - case 1: \ - case 2: \ - case 4: \ - case 8: \ - __pu_err = __put_user_fn(sizeof (*(ptr)), \ - ptr, &__x); \ - break; \ - default: \ - __put_user_bad(); \ - break; \ - } \ - __pu_err; \ -}) - -#define put_user(x, ptr) \ -({ \ - might_sleep(); \ - __put_user(x, ptr); \ -}) - - -extern int __put_user_bad(void) __attribute__((noreturn)); - -#define __get_user(x, ptr) \ -({ \ - int __gu_err = -EFAULT; \ - __chk_user_ptr(ptr); \ - switch (sizeof(*(ptr))) { \ - case 1: { \ - unsigned char __x; \ - __gu_err = __get_user_fn(sizeof (*(ptr)), \ - ptr, &__x); \ - (x) = *(__force __typeof__(*(ptr)) *) &__x; \ - break; \ - }; \ - case 2: { \ - unsigned short __x; \ - __gu_err = __get_user_fn(sizeof (*(ptr)), \ - ptr, &__x); \ - (x) = *(__force __typeof__(*(ptr)) *) &__x; \ - break; \ - }; \ - case 4: { \ - unsigned int __x; \ - __gu_err = __get_user_fn(sizeof (*(ptr)), \ - ptr, &__x); \ - (x) = *(__force __typeof__(*(ptr)) *) &__x; \ - break; \ - }; \ - case 8: { \ - unsigned long long __x; \ - __gu_err = __get_user_fn(sizeof (*(ptr)), \ - ptr, &__x); \ - (x) = *(__force __typeof__(*(ptr)) *) &__x; \ - break; \ - }; \ - default: \ - __get_user_bad(); \ - break; \ - } \ - __gu_err; \ -}) - -#define get_user(x, ptr) \ -({ \ - might_sleep(); \ - __get_user(x, ptr); \ -}) - -extern int __get_user_bad(void) __attribute__((noreturn)); - -#define __put_user_unaligned __put_user -#define __get_user_unaligned __get_user - -/** - * __copy_to_user: - Copy a block of data into user space, with less checking. - * @to: Destination address, in user space. - * @from: Source address, in kernel space. - * @n: Number of bytes to copy. - * - * Context: User context only. This function may sleep. - * - * Copy data from kernel space to user space. Caller must check - * the specified block with access_ok() before calling this function. - * - * Returns number of bytes that could not be copied. - * On success, this will be zero. - */ -static inline unsigned long __must_check -__copy_to_user(void __user *to, const void *from, unsigned long n) -{ - if (__builtin_constant_p(n) && (n <= 256)) - return uaccess.copy_to_user_small(n, to, from); - else - return uaccess.copy_to_user(n, to, from); -} - -#define __copy_to_user_inatomic __copy_to_user -#define __copy_from_user_inatomic __copy_from_user - -/** - * copy_to_user: - Copy a block of data into user space. - * @to: Destination address, in user space. - * @from: Source address, in kernel space. - * @n: Number of bytes to copy. - * - * Context: User context only. This function may sleep. - * - * Copy data from kernel space to user space. - * - * Returns number of bytes that could not be copied. - * On success, this will be zero. - */ -static inline unsigned long __must_check -copy_to_user(void __user *to, const void *from, unsigned long n) -{ - might_sleep(); - if (access_ok(VERIFY_WRITE, to, n)) - n = __copy_to_user(to, from, n); - return n; -} - -/** - * __copy_from_user: - Copy a block of data from user space, with less checking. - * @to: Destination address, in kernel space. - * @from: Source address, in user space. - * @n: Number of bytes to copy. - * - * Context: User context only. This function may sleep. - * - * Copy data from user space to kernel space. Caller must check - * the specified block with access_ok() before calling this function. - * - * Returns number of bytes that could not be copied. - * On success, this will be zero. - * - * If some data could not be copied, this function will pad the copied - * data to the requested size using zero bytes. - */ -static inline unsigned long __must_check -__copy_from_user(void *to, const void __user *from, unsigned long n) -{ - if (__builtin_constant_p(n) && (n <= 256)) - return uaccess.copy_from_user_small(n, from, to); - else - return uaccess.copy_from_user(n, from, to); -} - -/** - * copy_from_user: - Copy a block of data from user space. - * @to: Destination address, in kernel space. - * @from: Source address, in user space. - * @n: Number of bytes to copy. - * - * Context: User context only. This function may sleep. - * - * Copy data from user space to kernel space. - * - * Returns number of bytes that could not be copied. - * On success, this will be zero. - * - * If some data could not be copied, this function will pad the copied - * data to the requested size using zero bytes. - */ -static inline unsigned long __must_check -copy_from_user(void *to, const void __user *from, unsigned long n) -{ - might_sleep(); - if (access_ok(VERIFY_READ, from, n)) - n = __copy_from_user(to, from, n); - else - memset(to, 0, n); - return n; -} - -static inline unsigned long __must_check -__copy_in_user(void __user *to, const void __user *from, unsigned long n) -{ - return uaccess.copy_in_user(n, to, from); -} - -static inline unsigned long __must_check -copy_in_user(void __user *to, const void __user *from, unsigned long n) -{ - might_sleep(); - if (__access_ok(from,n) && __access_ok(to,n)) - n = __copy_in_user(to, from, n); - return n; -} - -/* - * Copy a null terminated string from userspace. - */ -static inline long __must_check -strncpy_from_user(char *dst, const char __user *src, long count) -{ - long res = -EFAULT; - might_sleep(); - if (access_ok(VERIFY_READ, src, 1)) - res = uaccess.strncpy_from_user(count, src, dst); - return res; -} - -static inline unsigned long -strnlen_user(const char __user * src, unsigned long n) -{ - might_sleep(); - return uaccess.strnlen_user(n, src); -} - -/** - * strlen_user: - Get the size of a string in user space. - * @str: The string to measure. - * - * Context: User context only. This function may sleep. - * - * Get the size of a NUL-terminated string in user space. - * - * Returns the size of the string INCLUDING the terminating NUL. - * On exception, returns 0. - * - * If there is a limit on the length of a valid string, you may wish to - * consider using strnlen_user() instead. - */ -#define strlen_user(str) strnlen_user(str, ~0UL) - -/* - * Zero Userspace - */ - -static inline unsigned long __must_check -__clear_user(void __user *to, unsigned long n) -{ - return uaccess.clear_user(n, to); -} - -static inline unsigned long __must_check -clear_user(void __user *to, unsigned long n) -{ - might_sleep(); - if (access_ok(VERIFY_WRITE, to, n)) - n = uaccess.clear_user(n, to); - return n; -} - -#endif /* __S390_UACCESS_H */ |