aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw/qib
Commit message (Collapse)AuthorAgeFilesLines
* IB/qib: Fix a possible data corruption when receiving packetsRam Vepa2012-01-123-4/+10
| | | | | | | | | | | | | | commit eddfb675256f49d14e8c5763098afe3eb2c93701 upstream. Prevent a receive data corruption by ensuring that the write to update the rcvhdrheadn register to generate an interrupt is at the very end of the receive processing. Signed-off-by: Ramkrishna Vepa <ram.vepa@qlogic.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* IB/qib: Ensure that LOS and DFE are being turned offMitko Haralanov2011-06-172-8/+23
| | | | | | | | | | | | Due to timing, it is possible for the LOS and DFE to remain on. This is due to the link progressing to LinkUP prior to the driver getting the first Status Changed interrupt. By expanding the conditions under which LOS is turned off and DFE timeout is being set, timing is no longer an issue. Signed-off-by: Mitko Haralanov <mitko@qlogic.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
* RDMA: Add netlink infrastructureRoland Dreier2011-05-201-1/+1
| | | | | | | | | | | | Add basic RDMA netlink infrastructure that allows for registration of RDMA clients for which data is to be exported and supplies message construction callbacks. Signed-off-by: Nir Muchtar <nirm@voltaire.com> [ Reorganize a few things, add CONFIG_NET dependency. - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
* IB/qib: Use pci_dev->revisionSergei Shtylyov2011-05-121-4/+1
| | | | | | | | | | The driver reads PCI revision ID from the PCI configuration register while it's already stored by PCI subsystem in the revision field of struct pci_dev. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
* IB/qib: Prevent driver hang with unprogrammed boardsMitko Haralanov2011-05-091-1/+2
| | | | | | | | | The time limit test now correctly checks against current jiffies to avoid the hang. Signed-off-by: Mitko Haralanov <mitko@qlogic.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
* Revert wrong fixes for common misspellingsLucas De Marchi2011-04-263-3/+3
| | | | | | | These changes were incorrectly fixed by codespell. They were now manually corrected. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
* Fix common misspellingsLucas De Marchi2011-03-3110-18/+18
| | | | | | Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
* mm: export __get_user_pagesHuang Ying2011-03-171-3/+3
| | | | | | | | | | | | | | | | | In most cases, get_user_pages and get_user_pages_fast should be used to pin user pages in memory. But sometimes, some special flags except FOLL_GET, FOLL_WRITE and FOLL_FORCE are needed, for example in following patch, KVM needs FOLL_HWPOISON. To support these users, __get_user_pages is exported directly. There are some symbol name conflicts in infiniband driver, fixed them too. Signed-off-by: Huang Ying <ying.huang@intel.com> CC: Andrew Morton <akpm@linux-foundation.org> CC: Michel Lespinasse <walken@google.com> CC: Roland Dreier <roland@kernel.org> CC: Ralph Campbell <infinipath@qlogic.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* IB/qib: Fix M_Key field in SubnGet and SubnGetResp MADsMitko Haralanov2011-03-141-2/+3
| | | | | | | | | Set the M_Key field in SubnGet and SugnGetResp MADs based on correctly interpreting the protection level specified in the M_KeyProtBits field. Signed-off-by: Mitko Haralanov <mitko@qlogic.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
* IB/qib: Set default LE2 value for active cables to 0Mitko Haralanov2011-03-142-3/+12
| | | | | | | | For active and far-EQ cables use an LE2 value of 0 for improved SI. Signed-off-by: Mitko Haralanov <mitko@qlogic.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
* IB/qib: Return correct MAD when setting link width to 255Mitko Haralanov2011-02-221-3/+4
| | | | | | | | | | Fix a bug which causes the driver to return incorrect MADs as a response to Set(PortInfo) which sets the link width to 0xFF or link speed to 0xF. Signed-off-by: Mitko Haralanov <mitko@qlogic.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
* IB/qib: Prevent double completions after a timeout or RNR errorMike Marciniszyn2011-02-171-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | There is a double completion associated with error handling for RC QPs. The sequence is: - The do_rc_ack() routine fields an RNR nack and there are 0 rnr_retries configured on the QP. - qib_error_qp() stops the pending timer - qib_rc_send_complete() is called from sdma_complete() - qib_rc_send_complete() starts the timer because the msb of the psn just completed says an ack is needed. - a bunch of flushes occur as ipoib posts WQEs to an error'ed QP - rc_timeout() calls qib_restart_rc() - qib_restart_rc() calls qib_send_complete() with a IB_WC_RETRY_EXC_ERR on a wqe that has already been completed in the past The fix avoids starting the timer since another packet will never arrive. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
* IB/qib: Fix double add_timer()Mike Marciniszyn2011-02-101-0/+2
| | | | | | | | | | | | | | | | | | | | | | | The following panic BUG_ON occurs during qib testing: Kernel BUG at include/linux/timer.h:82 RIP [<ffffffff881f7109>] :ib_qib:start_timer+0x73/0x89 RSP <ffffffff80425bd0> <0>Kernel panic - not syncing: Fatal exception <0>Dumping qib trace buffer from panic qib_set_lid INFO: IB0:1 got a lid: 0xf8 Done dumping qib trace buffer BUG: warning at kernel/panic.c:137/panic() (Tainted: G The flaw is due to a missing state test when processing responses that results in an add_timer() call when the same timer is already queued. This code was executing in parallel with a QP destroy on another CPU that had changed the state to reset, but the missing test caused to response handling code to run on into the panic. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
* IB/qib: Hold link for TX SERDES settingsMitko Haralanov2011-01-281-19/+11
| | | | | | | | Hold the IB link at DISABLED until we get the correct TX settings on mezz boards. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
* Merge branch 'for-linus' of ↵Linus Torvalds2011-01-175-45/+21
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA: Update workqueue usage RDMA/nes: Fix incorrect SFP+ link status detection on driver init RDMA/nes: Fix SFP+ link down detection issue with switch port disable RDMA/nes: Generate IB_EVENT_PORT_ERR/PORT_ACTIVE events RDMA/nes: Fix bonding on iw_nes IB/srp: Test only once whether iu allocation succeeded IB/mlx4: Handle protocol field in multicast table RDMA: Use vzalloc() to replace vmalloc()+memset(0) mlx4_{core, ib, en}: Fix driver when sizeof (phys_addr_t) > sizeof (long) IB/mthca: Fix driver when sizeof (phys_addr_t) > sizeof (long)
| * RDMA: Update workqueue usageTejun Heo2011-01-165-40/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * ib_wq is added, which is used as the common workqueue for infiniband instead of the system workqueue. All system workqueue usages including flush_scheduled_work() callers are converted to use and flush ib_wq. * cancel_delayed_work() + flush_scheduled_work() converted to cancel_delayed_work_sync(). * qib_wq is removed and ib_wq is used instead. This is to prepare for deprecation of flush_scheduled_work(). Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * RDMA: Use vzalloc() to replace vmalloc()+memset(0)Joe Perches2011-01-121-5/+2
| | | | | | | | | | Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* | Merge branch 'for-next' of ↵Linus Torvalds2011-01-131-1/+1
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) Documentation/trace/events.txt: Remove obsolete sched_signal_send. writeback: fix global_dirty_limits comment runtime -> real-time ppc: fix comment typo singal -> signal drivers: fix comment typo diable -> disable. m68k: fix comment typo diable -> disable. wireless: comment typo fix diable -> disable. media: comment typo fix diable -> disable. remove doc for obsolete dynamic-printk kernel-parameter remove extraneous 'is' from Documentation/iostats.txt Fix spelling milisec -> ms in snd_ps3 module parameter description Fix spelling mistakes in comments Revert conflicting V4L changes i7core_edac: fix typos in comments mm/rmap.c: fix comment sound, ca0106: Fix assignment to 'channel'. hrtimer: fix a typo in comment init/Kconfig: fix typo anon_inodes: fix wrong function name in comment fix comment typos concerning "consistent" poll: fix a typo in comment ... Fix up trivial conflicts in: - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c) - fs/ext4/ext4.h Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
| * tree-wide: fix comment/printk typosUwe Kleine-König2010-11-011-1/+1
| | | | | | | | | | | | | | | | | | | | "gadget", "through", "command", "maintain", "maintain", "controller", "address", "between", "initiali[zs]e", "instead", "function", "select", "already", "equal", "access", "management", "hierarchy", "registration", "interest", "relative", "memory", "offset", "already", Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | Merge branch 'for-linus' of ↵Linus Torvalds2011-01-1117-158/+658
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (42 commits) IB/qib: Fix refcount leak in lkey/rkey validation IB/qib: Improve SERDES tunning on QMH boards IB/qib: Unnecessary delayed completions on RC connection IB/qib: Issue pre-emptive NAKs on eager buffer overflow IB/qib: RDMA lkey/rkey validation is inefficient for large MRs IB/qib: Change QPN increment IB/qib: Add fix missing from earlier patch IB/qib: Change receive queue/QPN selection IB/qib: Fix interrupt mitigation IB/qib: Avoid duplicate writes to the rcv head register IB/qib: Add a few new SERDES tunings IB/qib: Reset packet list after freeing IB/qib: New SERDES init routine and improvements to SI quality IB/qib: Clear WAIT_SEND flags when setting QP to error state IB/qib: Fix context allocation with multiple HCAs IB/qib: Fix multi-Florida HCA host panic on reboot IB/qib: Handle transitions from ACTIVE_DEFERRED to ACTIVE better IB/qib: UD send with immediate receive completion has wrong size IB/qib: Set port physical state even if other fields are invalid IB/qib: Generate completion callback on errors ...
| * | IB/qib: Fix refcount leak in lkey/rkey validationMike Marciniszyn2011-01-101-16/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mr optimization introduced a reference count leak on an exception test. The lock/refcount manipulation is moved down and the problematic exception test now calls bail to insure that the lock is released. Additional fixes as suggested by Ralph Campbell <ralph.campbell@qlogic.org>: - reduce lock scope of dma regions - use explicit values on returns vs. automatic ret value Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * | IB/qib: Improve SERDES tunning on QMH boardsMike Marciniszyn2011-01-101-3/+23
| | | | | | | | | | | | | | | | | | | | | | | | Improve the QMH SERDES tunning on initial driver load by having the driver go through a link state change. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * | IB/qib: Unnecessary delayed completions on RC connectionMike Marciniszyn2011-01-101-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently on receipt of a response message (ACKs, RDMA Response, Atomic Responses etc.) if the SDMA completion counter is not advanced the driver delays the completion of the WQE. In most cases this is overly pessimistic as the response (ACK) to a previously transmitted send implies that the send is complete. Ensure that SDMA queue is progressed appropriately before determining if a send has delayed completions. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * | IB/qib: Issue pre-emptive NAKs on eager buffer overflowMike Marciniszyn2011-01-101-4/+137
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Under congestion resulting in eager buffer overflow attempt to send pre-emptive NAKs if header queue entries with TID errors are generated and a valid header is present. This prevents long timeouts and flow restarts if a trailing set of packets are dropped due to eager overflows. Pre-emptive NAKs are currently only supported for RDMA writes. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * | IB/qib: RDMA lkey/rkey validation is inefficient for large MRsMike Marciniszyn2011-01-103-23/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current code loops during rkey/lkey validiation to isolate the MR for the RDMA, which is expensive when the current operation is inside a very large memory region. This fix optimizes rkey/lkey validation routines for user memory regions and fast memory regions. The MR entry can be isolated by shifts/mods instead of looping. The existing loop is preserved for phys memory regions for now. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * | IB/qib: Change QPN incrementMike Marciniszyn2011-01-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Changing from +1 to +2 allows for better QP distribution across receive contexts. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * | IB/qib: Add fix missing from earlier patchMike Marciniszyn2011-01-101-31/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | The upstream code was missing part of a receive/error race fix from the internal tree. Add the missing part, which makes future merges possible. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * | IB/qib: Change receive queue/QPN selectionMike Marciniszyn2011-01-104-31/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The basic idea is that on SusieQ, the difficult part of mapping QPN to context is handled by the mapping registers so the generic QPN allocation doesn't need to worry about chip specifics. For Monty and Linda, there is no mapping table so the qpt->mask (same as dd->qpn_mask), is used to see if the QPN to context falls within [zero..dd->n_krcv_queues). Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * | IB/qib: Fix interrupt mitigationMike Marciniszyn2011-01-105-8/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For SusieQ we need to write to the interrupt timer register before updating the header queue head with interrupt count. This is to ensure that the timer is enabled properly and a receive available interrupt is delivered. Otherwise this interrupt can be lost if the receiver header/eager queues are full before the timer is enabled. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * | IB/qib: Avoid duplicate writes to the rcv head registerMike Marciniszyn2011-01-101-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | Avoid duplicate writes to the head register as this can lead to lost interrupts if the context goes full before the second write is done. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * | IB/qib: Add a few new SERDES tuningsMike Marciniszyn2011-01-101-3/+26
| | | | | | | | | | | | | | | | | | | | | Add new SERDES tuning to aid manufacturing. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * | IB/qib: Reset packet list after freeingMike Marciniszyn2011-01-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Reset the list pointers after freeing the SDMA packet list. This is done to any potential double-free cases. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * | IB/qib: New SERDES init routine and improvements to SI qualityMike Marciniszyn2011-01-101-15/+255
| | | | | | | | | | | | | | | | | | | | | | | | | | | Implement new SERDES initialization routine and improvements to signal integrity -- disable LE1 adaptation, disable LOS after link-up, set better SERDES parameters. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * | IB/qib: Clear WAIT_SEND flags when setting QP to error stateMike Marciniszyn2011-01-101-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | If these flags are set when the QP is transitioned to the error state, it will wait until the flags are cleared, which may never happen if the error transition is due to a link going down. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * | IB/qib: Fix context allocation with multiple HCAsMike Marciniszyn2011-01-101-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | The driver was incorrectly choosing HCAs on which to allocate new user contexts based on overall count of usable ports regardless whether the usable port was on the currently selected HCA. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * | IB/qib: Fix multi-Florida HCA host panic on rebootMike Marciniszyn2011-01-101-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add check when setting configured contexts that the value does not exceed the number of contexts allocated for the card. If the value exceeds the already allocated count, set it to what is already allocated. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * | IB/qib: Handle transitions from ACTIVE_DEFERRED to ACTIVE betterMike Marciniszyn2011-01-101-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the link transitions from ACTIVE_DEFERRED to ACTIVE, the driver only sees the ACTIVE state. With this change, it will check whether the state was already ACTIVE and if so, it will not generated IB events and will not clear symbol error counts. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * | IB/qib: UD send with immediate receive completion has wrong sizeMike Marciniszyn2011-01-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The code to generate receive completion entries for UD send with immediate contains the wrong payload length. This is because when the code to compute the payload size was moved, the value of hdrsize didn't get moved too. The fix is to update tlen directly. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * | IB/qib: Set port physical state even if other fields are invalidMike Marciniszyn2011-01-101-20/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The IBTA vol. 1 release 1.2.1 spec. says: C14-24.2.1: If PortInfo:Portstate=Down, then a SubnSet(PortInfo) shall make any changes it specifies to PortInfo:PortPhysicalState; any other result is vendor-dependent. The patch changes the error handling so that the reply says there are invalid fields but still attempts to set fields that are in range including PortInfo:PortPhysicalState. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * | IB/qib: Generate completion callback on errorsMike Marciniszyn2011-01-101-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | According to IBTA vol. 1, C11-30.1.1, a notification callback is invoked if the CQ is armed for the next solicited completion event or an error completion. The error case wasn't being generated correctly. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * | IB/qib: Add support for the new QME7362 cardMike Marciniszyn2011-01-101-0/+4
| | | | | | | | | | | | | | | | | | | | | Add support to recognize another board variation named QME7362. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * | IB/qib: Add receive header queue size module parametersMike Marciniszyn2011-01-101-4/+24
| | | | | | | | | | | | | | | | | | | | | | | | The receive header queue sizes need to modified for performance tuning. Three module parameters are added to support this. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * | IB/qib: Remove IB latency turnoffMike Marciniszyn2011-01-101-2/+0
| |/ | | | | | | | | | | | | This is required for hardware testing. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* | fs: dcache rationalise dget variantsNick Piggin2011-01-071-1/+1
| | | | | | | | | | | | | | | | | | | | dget_locked was a shortcut to avoid the lazy lru manipulation when we already held dcache_lock (lru manipulation was relatively cheap at that point). However, how that the lru lock is an innermost one, we never hold it at any caller, so the lock cost can now be avoided. We already have well working lazy dcache LRU, so it should be fine to defer LRU manipulations to scan time. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
* | fs: dcache remove dcache_lockNick Piggin2011-01-071-3/+0
| | | | | | | | | | | | dcache_lock no longer protects anything. remove it. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
* | fs: dcache scale dentry refcountNick Piggin2011-01-071-1/+1
|/ | | | | | | | Make d_count non-atomic and protect it with d_lock. This allows us to ensure a 0 refcount dentry remains 0 without dcache_lock. It is also fairly natural when we start protecting many other dentry members with d_lock. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
* convert get_sb_single() usersAl Viro2010-10-291-7/+7
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* Merge branch 'for-linus' of ↵Linus Torvalds2010-10-261-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (52 commits) split invalidate_inodes() fs: skip I_FREEING inodes in writeback_sb_inodes fs: fold invalidate_list into invalidate_inodes fs: do not drop inode_lock in dispose_list fs: inode split IO and LRU lists fs: switch bdev inode bdi's correctly fs: fix buffer invalidation in invalidate_list fsnotify: use dget_parent smbfs: use dget_parent exportfs: use dget_parent fs: use RCU read side protection in d_validate fs: clean up dentry lru modification fs: split __shrink_dcache_sb fs: improve DCACHE_REFERENCED usage fs: use percpu counter for nr_dentry and nr_dentry_unused fs: simplify __d_free fs: take dcache_lock inside __d_path fs: do not assign default i_ino in new_inode fs: introduce a per-cpu last_ino allocator new helper: ihold() ...
| * fs: do not assign default i_ino in new_inodeChristoph Hellwig2010-10-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of always assigning an increasing inode number in new_inode move the call to assign it into those callers that actually need it. For now callers that need it is estimated conservatively, that is the call is added to all filesystems that do not assign an i_ino by themselves. For a few more filesystems we can avoid assigning any inode number given that they aren't user visible, and for others it could be done lazily when an inode number is actually needed, but that's left for later patches. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | Merge branch 'for-linus' of ↵Linus Torvalds2010-10-265-6/+16
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (63 commits) IB/qib: clean up properly if pci_set_consistent_dma_mask() fails IB/qib: Allow driver to load if PCIe AER fails IB/qib: Fix uninitialized pointer if CONFIG_PCI_MSI not set IB/qib: Fix extra log level in qib_early_err() RDMA/cxgb4: Remove unnecessary KERN_<level> use RDMA/cxgb3: Remove unnecessary KERN_<level> use IB/core: Add link layer type information to sysfs IB/mlx4: Add VLAN support for IBoE IB/core: Add VLAN support for IBoE IB/mlx4: Add support for IBoE mlx4_en: Change multicast promiscuous mode to support IBoE mlx4_core: Update data structures and constants for IBoE mlx4_core: Allow protocol drivers to find corresponding interfaces IB/uverbs: Return link layer type to userspace for query port operation IB/srp: Sync buffer before posting send IB/srp: Use list_first_entry() IB/srp: Reduce number of BUSY conditions IB/srp: Eliminate two forward declarations IB/mlx4: Signal node desc changes to SM by using FW to generate trap 144 IB: Replace EXTRA_CFLAGS with ccflags-y ...
generated by cgit v1.1 at 2024-05-25 21:57:54 +0000