aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/media/dvb/ttpci/budget-ci.c
Commit message (Collapse)AuthorAgeFilesLines
* [media] budget-ci: Add support for TT S-1500 with BSBE1-D01A tunerOliver Endriss2011-05-201-0/+21
| | | | | | | Add support for TT S-1500 with BSBE1-D01A tuner. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] remove the old RC_MAP_HAUPPAUGE_NEW RC mapMauro Carvalho Chehab2011-03-221-3/+12
| | | | | | | | | | | | | | | | | The rc-hauppauge-new map is a messy thing, as it bundles 3 different remote controllers as if they were just one, discarding the address byte. Also, some key maps are wrong. With the conversion to the new rc-core, it is likely that most of the devices won't be working properly, as the i2c driver and the raw decoders are now providing 16 bits for the remote, instead of just 8. delete mode 100644 drivers/media/rc/keymaps/rc-hauppauge-new.c Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Jarod Wilson <jarod@redhat.com>
* [media] DVB: Set scanmask for Budget/SAA7146 cardsDavid Henningsson2010-12-291-0/+1
| | | | | | | | These devices do not return the full command+address, so set scanmask accordingly. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] Rename all public generic RC functions from ir_ to rc_Mauro Carvalho Chehab2010-12-291-1/+1
| | | | | | | Those functions are not InfraRed specific. So, rename them to properly reflect it. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] rc: rename the remaining things to rc_coreMauro Carvalho Chehab2010-12-291-1/+1
| | | | | | | | | | | | | | | The Remote Controller subsystem is meant to be used not only by Infra Red but also for similar types of Remote Controllers. The core is not specific to Infra Red. As such, rename: - ir-core.h to rc-core.h - IR_CORE to RC_CORE - namespace inside rc-core.c/rc-core.h To be consistent with the other changes. No functional change on this patch. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] ir-core: make struct rc_dev the primary interfaceDavid Härdeman2010-12-291-27/+22
| | | | | | | | | | | | | | | | | | | | | | This patch merges the ir_input_dev and ir_dev_props structs into a single struct called rc_dev. The drivers and various functions in rc-core used by the drivers are also changed to use rc_dev as the primary interface when dealing with rc-core. This means that the input_dev is abstracted away from the drivers which is necessary if we ever want to support multiple input devs per rc device. The new API is similar to what the input subsystem uses, i.e: rc_device_alloc() rc_device_free() rc_device_register() rc_device_unregister() [mchehab@redhat.com: Fix compilation on mceusb and cx231xx, due to merge conflicts] Signed-off-by: David Härdeman <david@hardeman.nu> Acked-by: Jarod Wilson <jarod@redhat.com> Tested-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* Update broken web addresses in the kernel.Justin P. Mattock2010-10-181-1/+1
| | | | | | | | | | | | | | | | | The patch below updates broken web addresses in the kernel Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Finn Thain <fthain@telegraphics.com.au> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Dimitry Torokhov <dmitry.torokhov@gmail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Acked-by: Ben Pfaff <blp@cs.stanford.edu> Acked-by: Hans J. Koch <hjk@linutronix.de> Reviewed-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* V4L/DVB: Technotrend S2-3200 ships with a TT 1500 remoteHermann Gausterer2010-06-011-0/+1
| | | | | | | | | The Technotrend Budget S2-3200 ships with the Technotrend 1500 bundled remote which is already supported. Just add the right Subsystem Device ID. Signed-off-by: Hermann Gausterer <git-kernel-2010@mrq1.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: Convert drivers/media/dvb/ttpci/budget-ci.c to use ir-coreDavid Härdeman2010-05-191-37/+3
| | | | | | | | | | | Converts drivers/media/dvb/ttpci/budget-ci.c to use ir-core rather than rolling its own keydown timeout handler and reporting keys via drivers/media/IR/ir-functions.c. [mchehab@redhat.com: Drop the call to ir_input_init() as it is no longer needed] Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: ir-core: Make use of the new IR keymap modulesMauro Carvalho Chehab2010-05-191-5/+5
| | | | | | | | Instead of using the ugly keymap sequences, use the new rc-*.ko keymap files. For now, it is still needed to have one keymap loaded, for the RC code to work. Later patches will remove this depenency. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: ir: prepare IR code for a parameter change at register functionMauro Carvalho Chehab2010-05-191-1/+1
| | | | | | | A latter patch will reuse the ir_input_register with a different meaning. Before it, change all occurrences to a temporary name. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: ir: use IR_KEYTABLE where an IR table is neededMauro Carvalho Chehab2010-05-191-3/+3
| | | | | | | Replaces most of the occurences of IR keytables on V4L drivers by a macro that evaluates to provide the name of the exported symbol. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: ir-core: export driver name used by IR via ueventMauro Carvalho Chehab2010-05-181-1/+3
| | | | | | | | Now, both driver and keytable names are exported to userspace. This will help userspace to decide when a table need to be replaced by another one. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13634): ir-core: allow passing IR device parameters to ir-coreMauro Carvalho Chehab2010-02-261-1/+1
| | | | | | | Adds an structure to ir_input_register to contain IR device characteristics, like supported protocols and a callback to handle protocol event changes. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13617): ir: move input_register_device() to happen inside ↵Mauro Carvalho Chehab2009-12-161-35/+15
| | | | | | | | | | | | | | | ir_input_register() We'll need to register a sysfs class for the IR devices. As such, the better is to have the input_register_device()/input_unregister_device() inside the ir register/unregister functions. Also, solves a naming problem with V4L ir_input_init() function, that were, in fact, registering a device. While here, do a few cleanups at budget-ci IR logic. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13616): IR: rename ir_input_free as ir_input_unregisterMauro Carvalho Chehab2009-12-161-2/+2
| | | | | | | Now, ir_input_free does more than just freeing the keytab. Better to rename it as ir_input_unregister. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13537): ir: Prepare the code for dynamic keycode table allocationMauro Carvalho Chehab2009-12-051-3/+11
| | | | | | | | | | | | Currently, the IR table is initialized by calling ir_input_init(). However, this function doesn't return any error code, nor has a function to be called when de-initializing the IR's. Change the return argment to integer and make sure that each driver will handle the error code. Also adds a function to free any resources that may be allocating there: ir_input_free(). Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13533): ir: use dynamic tables, instead of static onesMauro Carvalho Chehab2009-12-051-1/+1
| | | | Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13361): stv090x: fix TS corruption with High Symbol Rate streamsManu Abraham2009-12-051-1/+1
| | | | | | | | | | | With a lower bandwidth setup, the Transport Stream gets corrupted due to TSFIFO overrun. The patch fixes the issue. The issue is seen with Transport Streams having a Symbol Rate of 22MSPS and/or greater. Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (12595): common/ir: use a struct for keycode tablesMauro Carvalho Chehab2009-09-121-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, V4L uses a scancode table whose index is the scancode and the value is the keycode. While this works, it has some drawbacks: 1) It requires that the scancode to be at the range 00-7f; 2) keycodes should be masked on 7 bits in order for it to work; 3) due to the 7 bits approach, sometimes it is not possible to replace the default keyboard to another one with a different encoding rule; 4) it is different than what is done with dvb-usb approach; 5) it requires a typedef for it to work. This is not a recommended Linux CodingStyle. This patch is part of a larger series of IR changes. It basically replaces the IR_KEYTAB_TYPE tables by a structured table: struct ir_scancode { u16 scancode; u32 keycode; }; This is very close to what dvb does. So, a further integration with DVB code will be easy. While we've changed the tables, for now, the IR keycode handling is still based on the old approach. The only notable effect is the redution of about 35% of the ir-common module size: text data bss dec hex filename 6721 29208 4 35933 8c5d old/ir-common.ko 5756 18040 4 23800 5cf8 new/ir-common.ko In thesis, we could be using above u8 for scancode, reducing even more the size of the module, but defining it as u16 is more convenient, since, on dvb, each scancode has up to 16 bits, and we currently have a few troubles with rc5, as their scancodes are defined with more than 8 bits. This patch itself shouldn't be doing any functional changes. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11236): tda827x: fix locking issues with DVB-Cklaas de waal2009-03-301-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | Separate tuning table for DVB-C solves tuning problem at 388MHz TechnoTrend C-1501 DVB-C card does not lock on 388MHz. I assume that existing frequency table is valid for DVB-T. This is suggested by the name of the table: tda827xa_dvbt. Added a table for DVB-C with the name tda827xa_dvbc. Added runtime selection of the DVB-C table when the tuner is type FE_QAM. This should leave the behaviour of this driver with with DVB_T tuners unchanged. This modification is in file tda827x.c The tda827x.c gives the following warning message when debug=1: tda827x: tda827x_config not defined, cannot set LNA gain! Solved this by adding a tda827x_config struct in budget-ci.c. Signed-off-by: Klaas de Waal <klaas.de.waal@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* Merge branch 'for_linus' of ↵Linus Torvalds2009-01-071-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB (10191a): Update MAINTAINERS entries on media drivers V4L/DVB (10190): cx88: Fix some Kbuild troubles V4L/DVB (10189): dm1105: Fix build with INPUT=m and DVB_DM1105=y V4L/DVB (10185): Use negated usb_endpoint_xfer_control, etc V4L/DVB (10182): tda8290: fix TDA8290 + TDA18271 initialization V4L/DVB (10181): v4l2-device: Fix some sparse warnings V4L/DVB (10180): drivers/media: Fix a number of sparse warnings V4L/DVB (10179): tda8290: Fix two sparse warnings V4L/DVB (10178): dvb_frontend: Fix some sparse warnings due to static symbols V4L/DVB (10177): Fix sparse warnings on em28xx V4L/DVB (10176b): pxa-camera: fix redefinition warnings and missing DMA definitions V4L/DVB (10176a): Switch remaining clear_user_page users over to clear_user_highpage
| * V4L/DVB (10180): drivers/media: Fix a number of sparse warningsMauro Carvalho Chehab2009-01-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | anysee.c:44:5: warning: symbol 'dvb_usb_anysee_delsys' was not declared. Should it be static? cx24116.c:378:3: warning: symbol 'CX24116_MODFEC_MODES' was not declared. Should it be static? stb0899_algo.c:57:5: warning: symbol 'stb0899_get_srate' was not declared. Should it be static? stb0899_algo.c:766:6: warning: symbol 'Log2Int' was not declared. Should it be static? stb0899_drv.c:137:20: warning: symbol 'stb0899_quant_tab' was not declared. Should it be static? stb0899_drv.c:180:20: warning: symbol 'stb0899_est_tab' was not declared. Should it be static? stb0899_drv.c:220:5: warning: symbol '_stb0899_read_reg' was not declared. Should it be static? budget-ci.c:1348:23: warning: symbol 'tt3200_stb6100_config' was not declared. Should it be static? /home/v4l/master/v4l/cx25840-core.c:190:6: warning: symbol 'cx25840_work_handler' was not declared. Should it be static? /home/v4l/master/v4l/m5602_s5k83a.c:116:6: warning: symbol 's5k83a_dump_registers' was not declared. Should it be static? Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* | trivial: replace last usages of __FUNCTION__ in kernelHarvey Harrison2009-01-071-1/+1
|/ | | | | | | | __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* V4L/DVB (9442): Revert back previous change to 90MHzManu Abraham2008-12-301-1/+1
| | | | | | | | | | | | | Note: * At High Symbol Rates we do not have enouph machine cycles to handle the incoming symbols and hence might run into problems at the very end of the specified definition * Most of the equations have been calculated for a master clock of 99 MHz, running at 90MHz, raises lot of issues such as the need to recalculate all of them , which is eventually very painful. Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9425): Initialize at 90MHz itselfManu Abraham2008-12-301-1/+1
| | | | | Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9572): Whitespace cleanupMauro Carvalho Chehab2008-12-291-5/+5
| | | | | | Some recent patches added a few bad whitespaces. Remove that. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9462): Allow specifying clock per deviceManu Abraham2008-12-291-0/+3
| | | | | | | | | | Optimizations galore: Blistering barnacles! The KNC1 and friends like 90 Mhz clock much better rather than running at a higher throttle, for almost similar hardware. he exact cause unknown, possibly due to a lower voltage applied for the demod power supply. Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9461): Initialize SYSREG registerManu Abraham2008-12-291-2/+1
| | | | | Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9457): Optimization, Fix a BugManu Abraham2008-12-291-1/+1
| | | | | | | | | * cut down some I/O operations by disabling "disable gate" * budget_av was left with the gate open, thereby more susceptible to RF interference due to I/O operations Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9450): Code Review: #4 Consolidate configurationsManu Abraham2008-12-291-368/+19
| | | | | | | | | | * Better readability * Avoids duplication Comments from Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9444): Initialize post process events to NULLManu Abraham2008-12-291-1/+3
| | | | | Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9442): Revert back previous change to 90MHzManu Abraham2008-12-291-1/+1
| | | | | | | | | | | | | Note: * At High Symbol Rates we do not have enouph machine cycles to handle the incoming symbols and hence might run into problems at the very end of the specified definition * Most of the equations have been calculated for a master clock of 99 MHz, running at 90MHz, raises lot of issues such as the need to recalculate all of them , which is eventually very painful. Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9425): Initialize at 90MHz itselfManu Abraham2008-12-291-1/+1
| | | | | Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9424): Deviation from the reference, pullup is 12k insteadManu Abraham2008-12-291-1/+1
| | | | | Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9422): Bug: Fix a typoManu Abraham2008-12-291-2/+2
| | | | | Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9421): We must wait for the PLL to stabilizeManu Abraham2008-12-291-0/+23
| | | | | | | Thanks to Peter for the in depth explanation Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9417): DVB_ATTACH for STB0899, STB6100, TDA8261Manu Abraham2008-12-291-9/+6
| | | | | Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9410): Bug: Missing reference clock definitionManu Abraham2008-12-291-1/+2
| | | | | Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9409): Bug! inverted logicManu Abraham2008-12-291-1/+1
| | | | | Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9406): Really silly bug, setting bandwidth into frequencyMarko Schluessler2008-12-291-2/+2
| | | | | | | | | | probably should stop fiddling with code late nights. :-( Thanks to Marco for pointing it out and fixing it. Signed-off-by: Marko Schluessler <marco@lordzodiac.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9405): Practical tests show that the TT S2 3200 has I/Q inputs ↵Manu Abraham2008-12-291-1/+1
| | | | | | | | | | inverted, similar to the KNC1. Don't have this hardware and cannot verify this for myself, but from the reports this looks to be quite a reasonable and correct hypothesis. Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9403): Fix the CA module not working issueManu Abraham2008-12-291-1/+1
| | | | | Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9402): TT S2 3200 shouldn't need Inversion ON and Inversion AUTO at ↵Manu Abraham2008-12-291-1/+1
| | | | | | | | | | | the same time This is a racy situation. Inversion is default OFF on the TT S2 3200 hardware, unlike the KNC1 where it is default Inverted Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9401): Code SimplificationManu Abraham2008-12-291-1/+1
| | | | | | | | Use an enumeration for I/Q Swap rather than an int, easier to spot the nasty ones Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9399): some cleanups at budget-ciManu Abraham2008-12-291-11/+135
| | | | | | | | | | Still messing up: * Cleanup * Use KNC1's default settings to startup with * Add in tuner wrapper calls Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9398): Initial support for the Technotrend TT S2 3200Marko Schluessler2008-12-291-0/+511
| | | | | | Signed-off-by: Marko Schluessler <marco@lordzodiac.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (8964): dvb/budget: push adapter_nr mod option down to individual ↵Janne Grunau2008-10-121-1/+4
| | | | | | | | | | drivers adapter_nr mod option does not make sense for budget-core since it is only common code shared by all budget drivers Signed-off-by: Janne Grunau <janne-dvb@grunau.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: follow lspci device/vendor styleBjorn Helgaas2008-10-121-1/+1
| | | | | | | | Use "[%04x:%04x]" for PCI vendor/device IDs to follow the format used by lspci(8). Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (8076): budget-ci: Support the bundled remote control of the TT ↵Oliver Endriss2008-07-201-0/+1
| | | | | | | | | | DVB-C 1501 Support the bundled remote control of the TT DVB-C 1501 Thanks-to: SG <SiestaGomez@web.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.1 at 2024-05-13 07:50:30 +0000