aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/mwifiex
Commit message (Collapse)AuthorAgeFilesLines
* mwifiex: report error to MMC core if we cannot suspendBing Zhao2012-12-031-5/+6
| | | | | | | | | | | | | | commit dd321acddc3be1371263b8c9e6c6f2af89f63d57 upstream. When host_sleep_config command fails we should return error to MMC core to indicate the failure for our device. The misspelled variable is also removed as it's redundant. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mwifiex: fix 11n rx packet drop issueStone Piao2012-07-163-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | commit 925839243dc9aa4ef25305f5afd10ed18258a4ac upstream. Currently we check the sequence number of last packet received against start_win. If a sequence hole is detected, start_win is updated to next sequence number. Since the rx sequence number is initialized to 0, a corner case exists when BA setup happens immediately after association. As 0 is a valid sequence number, start_win gets increased to 1 incorrectly. This causes the first packet with sequence number 0 being dropped. Initialize rx sequence number as 0xffff and skip adjusting start_win if the sequence number remains 0xffff. The sequence number will be updated once the first packet is received. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mwifiex: Fixing NULL pointer dereferenceYogesh Ashok Powar2011-06-151-0/+2
| | | | | | | | | | | | | | | | | | Following OOPS was seen when booting with card inserted BUG: unable to handle kernel NULL pointer dereference at 0000004c IP: [<f8b7718c>] cfg80211_get_drvinfo+0x21/0x115 [cfg80211] *pde = 00000000 Oops: 0000 [#1] SMP Modules linked in: iwl3945 iwl_legacy mwifiex_sdio mac80211 11 sdhci_pci sdhci pl2303 'ethtool' on the mwifiex device returned this OOPS as wiphy_dev() returned NULL. Adding missing set_wiphy_dev() call to fix the problem. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge ↵John W. Linville2011-05-271-2/+2
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
| * mwifiex: correct event header lengthYogesh Ashok Powar2011-05-261-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While decoding received event packet from firmware, 4 bytes of interface header are already removed unconditionally. So for handling event only 4 more bytes needs to be pulled. This is achieved by changing event header length to 4. Almost all the events, except BA stream related and AMSDU aggregation control events, do not have the payload in their event skb. Such events handling depends only on the event ID. This event ID is the first four bytes of the event skb, which is copied to a separate variable before pulling the skb header. Hence event handling worked only for those events that didn't have payload in event skb. This patch fixes the broken event path of the events with payload in their event skb without harming existing working event path for the events without payload. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | Merge ↵John W. Linville2011-05-244-16/+60
|\ \ | |/ | | | | ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
| * mwifiex: adjust high/low water marks for tx_pending queueMarc Yang2011-05-192-2/+5
| | | | | | | | | | | | | | | | | | This is to fix an issue that the throughput of the higher priority stream gets dropped when a lower priority stream is present. Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mwifiex: CPU mips optimization with NO_PKT_PRIO_TIDMarc Yang2011-05-192-0/+7
| | | | | | | | | | | | | | | | | | | | If we go through the entire for loop in mwifiex_wmm_get_highest_priolist_ptr() and don't find any packets, set highest_queued_prio to NO_PKT_PRIO_TID (< LOW_PRIO_TID). Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mwifiex: check mwifiex_wmm_lists_empty() before dequeueMarc Yang2011-05-191-1/+1
| | | | | | | | | | | | | | | | | | add checks to mwifiex_wmm_process_tx() loop so it doesn't re-enter mwifiex_dequeue_tx_packet() to find it can't send. Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mwifiex: reduce CPU usage by tracking highest_queued_prioMarc Yang2011-05-192-3/+28
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds highest_queued_prio to track priority of packets as they are enqueued so that mwifiex_wmm_get_highest_priolist_ptr() starts checking at the first level where we have packets, instead of the highest. The function also lowers priority value to the level where first packet is found. Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mwifiex: reduce CPU usage by tracking tx_pkts_queuedMarc Yang2011-05-193-10/+19
| | | | | | | | | | | | | | | | | | | | This patch adds tx_pkts_queued to track number of packets being enqueued & dequeued so that mwifiex_wmm_lists_empty() evaluation is lightweight. Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | Merge branch 'master' of ↵John W. Linville2011-05-1622-492/+232
|\ \ | |/ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/iwlwifi/iwl-agn-tx.c net/mac80211/sta_info.h
| * mwifiex: use ieee80211_amsdu_to_8023s routineYogesh Ashok Powar2011-05-162-127/+20
| | | | | | | | | | | | | | | | | | | | | | mwifiex was using its own implementation of converting 802.11n AMSDU to 802.3s. This patch removes mwifiex specific implementation and uses existing ieee80211_amsdu_to_8023s routine. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mwifiex: remove mwifiex_recv_complete functionAmitkumar Karwar2011-05-123-32/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The function - increments dropped rx_packet count if status code passed to it is "-1". - frees SKB buffer. But currently the function is being called with "0" status code. This patch replaces above function by dev_kfree_skb_any() call. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mwifiex: cleanup ioctl.hBing Zhao2011-05-113-102/+4
| | | | | | | | | | | | | | | | | | Some structures and macros in ioctl.h are redundant or no longer used. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mwifiex: remove redundant local structuresAmitkumar Karwar2011-05-111-19/+9
| | | | | | | | | | | | | | | | | | Avoid use of local structure in the function if the structure is already allocated by the caller and the structure pointer is passed. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mwifiex: remove unnecessary struct mwifiex_opt_sleep_confirm_bufferAmitkumar Karwar2011-05-103-28/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The structure definition is struct mwifiex_opt_sleep_confirm_buffer { u8 hdr[4]; struct mwifiex_opt_sleep_confirm ps_cfm_sleep; } __packed; For sleep_confirm command we already reserve 4 bytes (using skb_reserve()) for an interface header. It will be filled later by interface specific code. We don't need "hdr[4]" element in above structure. So we can use "struct mwifiex_opt_sleep_confirm" directly instead of "struct mwifiex_opt_sleep_confirm_buffer". Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mwifiex: fix null derefs, mem leaks and triviaChristoph Fritz2011-05-108-17/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch: - adds kfree() where necessary - prevents potential null dereferences - makes use of kfree_skb() - replaces -1 for failed kzallocs with -ENOMEM Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Reviewed-by: Kiran Divekar <dkiran@marvell.com> Tested-by: Amitkumar Karwar <akarwar@marvell.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mwifiex: remove unnecessary variable initializationYogesh Ashok Powar2011-05-0519-165/+148
| | | | | | | | | | | | | | | | | | Skip initialization of local variables with some default values if the values are not going to be used further down the code path. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mwifiex: fix simultaneous assoc and scan issueAmitkumar Karwar2011-05-052-6/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When scan and assoc (infra/ibss) commands are simultaneously given in two terminals, association response is erroneously served while serving the scan response. mwifiex_cfg80211_results() is the common routine for sending ioctl (scan, assoc etc.) results to cfg80211 stack. In above scenario even if the common routine is called for scan ioctl context, it also tries to send information about assoc ioctl to cfg80211 because "priv->assoc_request/priv->ibss_join_request" flag is on at that time. Fix the issue by updating request variable after assoc handling and modifying the variable check in mwifiex_cfg80211_results. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | Merge branch 'for-davem' of ↵David S. Miller2011-05-056-112/+91
|\ \ | |/ | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
| * mwifiex: fix missing tsf_val TLVBing Zhao2011-05-022-2/+7
| | | | | | | | | | | | | | | | | | | | In mwifiex_cmd_append_tsf_tlv(), two tsf_val TLVs should be filled in the buffer and then sent to firmware. The missing first TLV for tsf_val is added back in this patch. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mwifiex: fix copy-n-paste 'thinko' for tsf_valJohn W. Linville2011-04-291-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | CC [M] drivers/net/wireless/mwifiex/join.o drivers/net/wireless/mwifiex/join.c: In function ‘mwifiex_cmd_802_11_associate’: drivers/net/wireless/mwifiex/join.c:119:8: warning: ‘tsf_val’ may be used uninitialized in this function drivers/net/wireless/mwifiex/join.c:103:12: note: ‘tsf_val’ was declared here Looks like a copy-n-paste error, identical lines are a few lines below the ones removed, with an actual memcpy to tsf_val in between... Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mwifiex: fix bug in mwifiex_save_curr_bcn()Amitkumar Karwar2011-04-281-16/+12
| | | | | | | | | | | | | | | | | | | | | | Since timestamp in beacon buffer keeps changing all the time, the memcmp check in mwifiex_save_curr_bcn() is redundant. Remove that memcmp check and also avoid freeing and allocation of buffer if required beacon buffer size is same as previous one. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mwifiex: HT capability information handlingAmitkumar Karwar2011-04-284-86/+64
| | | | | | | | | | | | | | | | | | | | | | | | | | 1) Initialise HT capabilities in cfg80211 properly. 2) Cfg80211 stack may modify "sband->ht_cap" to disable 40Mhz operation in 2.4GHz band (after recent patch "cfg80211: module_param to disable HT40 in 2.4GHz band") Therefore read "sband->ht_cap" instead of an adapter variable "hw_dot_11n_dev_cap" to get HT capabilities. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mwifiex: check firmware capabilities while initialising 5GHz band parametersAmitkumar Karwar2011-04-281-8/+11
| | | | | | | | | | | | | | | | | | | | There are some SD8787 cards which don't support 5GHz band. Therefore initialise 5GHz band parameters only if hardware supports the band. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | net: call dev_alloc_name from register_netdeviceJiri Pirko2011-05-051-4/+0
|/ | | | | | | | | | | | | | Force dev_alloc_name() to be called from register_netdevice() by dev_get_valid_name(). That allows to remove multiple explicit dev_alloc_name() calls. The possibility to call dev_alloc_name in advance remains. This also fixes veth creation regresion caused by 84c49d8c3e4abefb0a41a77b25aa37ebe8d6b743 Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* mwifiex: optimize driver initialization codeAmitkumar Karwar2011-04-193-64/+33
| | | | | | | | | | | | 1) removal of unnecessary mwifiex_device structure 2) avoid passing adapter pointer to mwifiex_init_sw() 3) remove local variable drv_mode_info in mwifiex_add_card() 4) type change in mwifiex_bss_attr to match mwifiex_private 5) removal of more wordy comments Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: remove some macro definitionsAmitkumar Karwar2011-04-195-7/+4
| | | | | | | | use corresponding macros defined in include/linux/ieee80211.h Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: remove redundant local variables and commentsYogesh Ashok Powar2011-04-1913-277/+105
| | | | | | | | | | | Remove some local variables (mainly function return values) that are used only once. Also, one dummy function and some wordy comments are removed. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: rename function mwifiex_is_ba_stream_availBing Zhao2011-04-142-3/+4
| | | | | | | | | The old function name sounds like checking for existing BA stream. The function actually checks if we have room for creating new BA stream or not. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: remove unused function parametersAmitkumar Karwar2011-04-1414-136/+80
| | | | | | | | | Some function parameters become useless after previous cleanup changes. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: remove redundant "return" at end of void functionYogesh Ashok Powar2011-04-1410-44/+1
| | | | | | | | | The return statement at the last line of a void function is not necessary. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: cleanup ioctl wait queue and abstraction layerAmitkumar Karwar2011-04-1419-1434/+502
| | | | | | | | | | | | | | | | 1) remove mwifiex_alloc_fill_wait_queue() and mwifiex_request_ioctl() 2) avoid dynamic allocation of wait queue 3) remove unnecessary mwifiex_error_code macros that were used mainly by the wait queue status code 4) remove some abstraction functions 5) split mwifiex_prepare_cmd() to mwifiex_send_cmd_async() and mwifiex_send_sync() to handle asynchronous and synchronous commands respectively Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: use common keyinfo bitmap for different key typesYogesh Ashok Powar2011-04-124-42/+18
| | | | | | | | | Instead of having separate key information definitions for each type of key, a common key information bitmap is used. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: fix cmd_skb headroom decreasing issueBing Zhao2011-04-121-0/+2
| | | | | | | | | | | | | Before calling host_to_card() to send the cmd to firmware, we use skb_push() to add 4 bytes SDIO interface header at the start of the data buffer. Since cmd_skb data structure will be re-used at a later time, we need to restore its headroom by removing the 4 bytes header. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: remove redundant encryption_mode mappingYogesh Ashok Powar2011-04-076-83/+19
| | | | | | | | | remove MWIFIEX_ENCRYPTION_MODE_ and use WLAN_CIPHER_SUITE_ macros directly Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: return success in set_default_key for WPA/WPA2Amitkumar Karwar2011-04-071-0/+4
| | | | | | | | | | | | | | | | | | | | | | When testing wpa_supplicant with 'nl80211' driver to connect to an AP with WPA/WPA2 security, we notice the followings: 1) add_key is called firstly with the key from cfg80211 2) set_defaut_key is called next set_default_key() is specific to WEP keys and should not be called in case of WPA/WPA2 security. The set_default_key() won't be called if wpa_supplicant uses "-Dwext" option, but it's been called if "-Dnl80211" option is specified. We can fix this issue by adding a check to return from set_default_key() if WEP key is not configured. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: remove unused macros in decl.h and main.hBing Zhao2011-04-042-31/+0
| | | | | | | These macros are leftover of previous cleanup patches. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: remove struct mwifiex_802_11_fixed_iesBing Zhao2011-04-042-22/+8
| | | | | | | | struct mwifiex_802_11_fixed_ies is not necessary. struct mwifiex_event_wep_icv_err is not used any more. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: cleanup power save related struct and macrosMarc Yang2011-04-044-66/+37
| | | | | | | | remove redundant structures and unused macros Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: remove unused macros in fw.hMarc Yang2011-04-041-42/+0
| | | | | | | | These definitions are no longer used after previous cleanups. Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: remove unused radio_on variable and macrosMarc Yang2011-04-045-9/+0
| | | | | | | | The radio_on variable is defined but never used. Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: remove MWIFIEX_AUTH_MODE_ macrosMarc Yang2011-04-044-11/+6
| | | | | | | | replace them with NL80211_AUTHTYPE_ macros Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: remove MWIFIEX_BSS_MODE_ macrosBing Zhao2011-04-0412-165/+74
| | | | | | | | | | | replace them with NL80211_IFTYPE_ macros Also remove redundant functions mwifiex_drv_get_mode() and mwifiex_bss_ioctl_mode(). Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: use IEEE80211_HT_CAP_ macros for 11n cap_infoMarc Yang2011-04-047-129/+63
| | | | | | | | | | | | | | | | | | | | | The hw_dot_11n_dev_cap reported by firmware hw_spec has different format than the 11n capabilities. Hence a lot of SET_ and RESET_ bit operation macros were used to convert the dev_cap format to 11n capability format. However the locally defined 11n ht_cap macros are not necessary as we can use IEEE80211_HT_CAP_ macros directly. The 32-bit dev_cap bitmap is added as comment to explain the mapping between firmware and 11n spec. Some unused macros and unnecessary adapter variables are also removed. Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: remove macro SHORT_SLOT_TIME_DISABLEDBing Zhao2011-04-042-6/+3
| | | | | | | | and SHORT_SLOT_TIME_ENABLED. Use WLAN_CAPABILITY_SHORT_SLOT_TIME instead. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: remove unnecessary _set_auth functionsMarc Yang2011-04-045-77/+19
| | | | | | | | | | | | | | mwifiex_set_encrypt_mode() mwifiex_set_auth_mode() mwifiex_set_auth() These functions are confusing and misleading. And they are really not needed at all. Some unused definitions are also removed. Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: remove helper functions for displaying 11n capabilitiesYogesh Ashok Powar2011-04-044-116/+0
| | | | | | | | | 'iw list' is sufficient to retrieve the information which was displayed by these functions. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wireless: mwifiex: initial commit for Marvell mwifiex driverBing Zhao2011-03-3035-0/+25462
This driver adds WiFi support for Marvell 802.11n based chipsets with SDIO interface. Currently only SD8787 is supported. More chipsets will be supported later. drivers/net/wireless/mwifiex/ Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Ramesh Radhakrishnan <rramesh@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.1 at 2024-05-25 17:42:46 +0000